Search Results

Search found 27515 results on 1101 pages for 'embedded linux'.

Page 456/1101 | < Previous Page | 452 453 454 455 456 457 458 459 460 461 462 463  | Next Page >

  • Problem with Ubuntu 10.04 and ATI

    - by Maximilinao
    I'm having a problem installing the drivers from the video card. Just finished installing the driver, reboot my OS, and my monitor is starting off in energy saving mode and does not boot Ubuntu. What I can do? Sorry for my English. I used the Google translator.

    Read the article

  • disable specific PCI device at boot

    - by Rhymoid
    I've just reinstalled Debian on my Sony VAIO laptop, and my dmesg and virtual consoles all get spammed with the same messages over and over again. [ 59.662381] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 59.901732] usb 1-1.2: new high-speed USB device number 91 using ehci_hcd [ 59.917940] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 60.157256] usb 1-1.2: new high-speed USB device number 92 using ehci_hcd I believe these messages are coming from an internally connected USB device, most likely the webcam (since that's the only thing that doesn't work). The only way I can seem to have it shut up (without killing my actually useful USB ports) is to disable one of the USB host controllers: # echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci_hcd/unbind This also takes down my Bluetooth interface, but I'm fine with that. I would like this setting to persist, so that I can painlessly use my virtual console again in case I need it. I want my operating system (Debian amd64) to never wake it up, but I don't know how to do this. I've tried to blacklist the module alias for the PCI device, but it seems to be ignored: $ cat /sys/bus/pci/devices/0000\:00\:1a.0/modalias pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 $ cat /etc/modprobe.d/blacklist blacklist pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 How do I ensure that this specific PCI device is never automatically activated, without disabling its driver altogether? -edit- The module was renamed recently, now the following works from userland: echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci-pci/unbind Still, I'm looking for a way to stop the kernel from binding that device in the first place.

    Read the article

  • What's a good tool for collecting statistics on filesystem usage?

    - by Kamil Kisiel
    We have a number of filesystems for our computational cluster, with a lot of users that store a lot of really large files. We'd like to monitor the filesystem and help optimize their usage of it, as well as plan for expansion. In order to this, we need some way to monitor how these filesystems are used. Essentially I'd like to know all sorts of statistics about the files: Age Frequency of access Last accessed times Types Sizes Ideally this information would be available in aggregate form for any directory so that we could monitor it based on project or user. Short of writing something up myself in Python, I haven't been able to find any tools capable of performing these duties. Any recommendations?

    Read the article

  • DNS caching server config problem

    - by Alex
    I have a Bind DNS caching-only server setup that is working. I am bringing up a new AD domain controller that will also be a DNS server for that AD but I don't want it responding to any DNS queries except those that are AD related. So, my goal is to leave this caching server as the primary DNS server for stations on the network and have it forward requests for the AD domain to the domain controller. My understanding is that I just need a forward zone for that domain pointing to the domain controller. However it does not seem to be working. So that leaves me to think that my caching server is not forwarding properly. For example, this AD is going to have a naming convention of hostname.mydomain.local. If I do an nslookup and specify the domain controller's IP address as the server, I can query addresses that exist in DNS on that server, such as dc1.mydomain.local. However, queries to my caching server times out (I get a response from the caching server if I query mydomain.local but none of the objects in that domain). Any suggestions? Here is my named.conf file: options { directory "/var/named"; listen-on { 192.168.0.14; 127.0.0.1; }; forwarders { ; ; }; forward first; }; zone "." in { type hint; file "db.cache"; }; zone "0.0.127.in-addr.arpa" in { type master; file "db.127.0.0"; }; //forward zone for mydomain.local zone "mydomain.local" { type forward; forwarders { 192.168.1.21; }; };

    Read the article

  • Table 'mysql.host' doesn't exist

    - by eriktm
    100913 10:21:29 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql /usr/local/mysql/libexec/mysqld: Table 'mysql.plugin' doesn't exist 100913 10:21:29 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 100913 10:21:29 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist 100913 10:21:29 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended This is the output from the log-file for mysqld I get when I try to start mysqld with the mysqld_safe command. I tried to run mysql_upgrade to correct the first error, but this command seems to require the server to be started, which is my original problem. Next, it says that the table mysql.host does not exist. I was unable to figure out what this is caused by.

    Read the article

  • monitor power and lock screen (Ubuntu Lucid)

    - by xsznix
    Hi, I'm trying to get my screen to turn off whenever I lock my screen. I know that in Power Management, there's an option to turn off the screen after a set amount of time, and I know about xset dpms force off, but the former doesn't allow me to turn off the screen from the logout menu, and the latter only turns the screen off for a short amount of time (1 minute or so. The screen just turns back on by itself). Is there a script I can modify to change what happens when "Lock screen" from the logout menu is selected, or is there a script I can add to the panel to lock the screen and then turn the monitor off (and turning it back on when I shake the mouse or something)? Thanks.

    Read the article

  • Accidental Extract Location - How to Clean Up?

    - by Gordon
    Sometimes I will do a command such as unzip tons_of_files.zip And I will forget to put a -d to point to a subdirectory. This causes the current folder to get filled with tons of files that are intermixed with the existing files. What is the best way to remove all these new files and/or move them to a new directory? I want to avoid having to manually examine the directory and determine if the file was part of the archive or was already present.

    Read the article

  • Separated virtual networks with same subnet range with 2 interface

    - by Coolpet
    I'm having some problems with routing with the following: I have a server with 2 interfaces. It has 1-1 alias contains the same subnet. the 2 interface is connected to 2 switch, which are separated from each other. Infrastructure: Eth0 192.168.16.2/20 Eth0:eth0 192.168.1.222/20 Eth1 192.168.32.3/20 Eth1:eth1 192.168.1.223/20 I have a PC which has the IP address: 192.168.1.3/24 The problem is the next: If PC is on subnet 1, I can ping it. If PC is on subnet 2, I can't ping it. traceroute shows the route is across 192.168.1.222 ping -I 192.168.1.223 192.168.1.3 is not working on subnet 2. arp entries show the MAC address belonging to the correct interface (eth1 on subnet 2) How can I force the server to look on both interface same ranged subnet for specific IP? It searches only in the first subnet. The routing table has these 2 entries: 192.168.0.0/20 dev eth0 proto kernel scope link src 192.168.1.222 192.168.0.0/20 dev eth1 proto kernel scope link src 192.168.1.223

    Read the article

  • mod_rewrite filename from mod_pagespeed back to normal files

    - by British Sea Turtle
    I am hoping someone can help me with this problem. I am moving to a new server and not using mod_pagespeed any more. However we have lots of external links to images on our site using the strange mod_pagespeed filenames. This is not an issue but we do not want to have lots of 404 errors. So I have lots of links like the following : http://www.domain.com/images/150x150xlink.png.pagespeed.ic.pPXw45HSQm.png http://www.domain.com/images/paris_01.gif.pagespeed.ce.vfrkuKUaj0.gif http://www.doamin.com/images/1st2.gif.pagespeed.ce.OUg38q6VbZ.gif How can I redirect them to : http://www.domain.com/images/150x150xlink.png http://www.domain.com/images/paris_01.gif http://www.doamin.com/images/1st2.gif There are thousands of files like this so I am hoping for a simple solution with mod_rewrite, I tried this but it does not work. So any help would be appreciated. RewriteCond %{REQUEST_URI} \.gif\.pagespeed\. [NC] RewriteRule ^(.*?\.gif)\..*\.gif$ $1 [NC,L]

    Read the article

  • Is there an email client optimized for screen readers and accessiblity?

    - by Adolfo Fitoria
    Hi. I'm currently working on a project to help visually impaired people. We're planning to use Orca screen reader for gnome. Everything is doing great but there is a problem with email web clients the most popular ones(gmail, yahoo, hotmail) are not optimized for screen readers. Is there some kind of simple email client optimized for this? Need to be very simple and straight foward and support multiple users too.

    Read the article

  • How to configure three IP address into single server

    - by user1363308
    I have Cisco device for call forwarding and three different system,I want to configure 15 and 16 server IP into 192.168.53.197 means eth0 --> 192.168.53.197 eth1 --> 192.168.16.15 eth2 --> 192.168.16.16 which work i have done with 15 and 16 individual , I will do some work on 197 after configuration eth1 and eth2. Means one system have three IP address but base IP address is 192.168.53.197

    Read the article

  • Apache intermittently aborting requests

    - by Adam Phillips
    I have just been dealing with a problem whereby http requests are being aborted, seemingly at random. On any particular page in the website, when you opened a page, a number of the assets (img, css, etc) failed to load. If you refreshed, the page may work fine, the same set of assets may fail to load or different assets may fail to load. The net tab in firefox was returning 'Aborted' in the HTTP status code column for the failed assets, even tho in the case of images, the image previews were still working. There was nothing in any of the apache logs about the requests that failed, however since it seemed to point to an apache issue, we restarted apache. The first time we tried, it made no difference but about 10 minutes later, in the absence of a better solution we tried again. Bizarrely, the problem disappeared immeadiately. So now the site seems to be running fine again but its rather unsettling, both the intermittent nature of the problem and the lack of an explanation for its resolution. Has anyone seen anything like this before and if so did you find out the reason behind it? Many Thanks

    Read the article

  • How to back up initial state of external backup drive?

    - by intuited
    I've picked up an HP Simplesave external drive. It comes with some fancy software that is of no use to me because I don't use Windows. Like many current consumer-targeted backup drives, the backup software is actually contained on the drive itself. I'd like to save the drive's initial state so that I can restore it if I decide to sell it. The backup box itself is somewhat customized: in addition to the hard drive device, it presents a CDROM-like device on /dev/sr0. I gather that the purpose of this cdrom device is to bootstrap via Windows autoplay the backup application which lives on the disk itself. I wouldn't suppose any guarantees about how it does this, so it seems important to preserve the exact state of the disk. The drive is formatted with a single 500GB NTFS partition. My initial thought was to use dd to dump the disk (/dev/sdb) itself, but this proved impractical, as the resulting file was not sparse. This seemed to be because the NTFS empty space is not filled with zeroes, but with a repeating series of 16 bytes. I tried gzipping the output of dd. This reduced to the file to a manageable size — the first 18GB was compressed to 81MB, versus 47MB to tarball the contents of the mounted filesystem — but it was very slow on my admittedly somewhat derelict Pentium M processor. The time to do that first 18GB was about 30 minutes. So I've resorted to dumping the disk state and partition data separately. I've dumped the partition state with sfdisk -d /dev/sdb > sfdisk.-d.out I've also created a compressed image of the NTFS partition (the only one on the disk) with ntfsclone --save-image --output - /dev/sdb1 | gzip -c > ntfsclone.img.gz Is there anything else I should do to ensure that I can restore the precise original state of the drive?

    Read the article

  • (monit) What does failure "Changed" mean

    - by bresc
    Hi, I installed monit on my server and tried to monitor nginx. check process nginx with pidfile /var/run/nginx.pid start program = "/etc/init.d/nginx start" stop program = "/etc/init.d/nginx stop" group server And I get Process 'nginx' status Changed monitoring status monitored data collected Wed Mar 24 00:37:49 2010 What does "Changed" mean? I couldn't find anything. Thx

    Read the article

  • Upgrade CentOS 5.2 to 5.3 -- but not 5.4

    - by Jeff Leyser
    Server currently running CentOS 5.2. Developers tell me they'd like the machine upgrade to CentOS 5.3 -- but not all the way to CentOS 5.4, as they haven't tested with 5.4 yet. I'm pretty sure a yum upgrade will put me at 5.4, as a yum check-update shows all sorts of 5.4 packages. So how do I move up to 5.3?

    Read the article

  • Corrupt tar (Resulting folder smaller than packed file)

    - by Om3g4
    Hi everybody, I have an issue with a tarball created on a SuSe 10.3 Server version. The .tar file has a size of 6.5 GB but if I untar it under Ubuntu 9.10 the resulting folder only has a size of 1.5 GB. commands used: tar cvf for packing, tar xvf for unpacking. Perhaps somebody knows how this can be fixed, would be great, cheers

    Read the article

  • mysql 5.1 - innodb - query_cache_size - 9,418,108 queries have been removed from the query cache due to lack of memory

    - by Tom C
    Currently running on a 16GB system - Ubuntu 64 bit. INnodb Buffer Pool is set to 10GB. tuning-primer shows the following: QUERY CACHE Query cache is enabled Current query_cache_size = 512 M Current query_cache_used = 501 M Current query_cache_limit = 4 M Current Query cache Memory fill ratio = 97.87 % Current query_cache_min_res_unit = 4 K However, 9418108 queries have been removed from the query cache due to lack of memory Perhaps you should raise query_cache_size That is over 9million queries removed. System uptime is 8 days. Should I remove the Query Cache altogether? Our db is always under heavy I/O. tia

    Read the article

  • Find hosted directories/ports in Jetty/Apache

    - by Paul Creasey
    Hi, I first asked this on SO, but i didn't get a response and i think it is probably more appropriate here. Let say I have a directory which is being hosted by Jetty or Apache (i'd like an answer for both), i know the URL including the port and i can log into the server. How can i find the directory that is being hosted by a certain port? I'd also like to go the other way, i have a folder on the server, which i know if being hosted, but i don't know the port so i can't find it in a web browser. How can i find a list of directories that are being hosted? This has been bugging me for ages but i've never bothered to ask before! Thanks.

    Read the article

  • Unified inbox shows twice on Thunderbird

    - by That Help Vampire Guy
    I'm using Thunderbird 24. If I show folders in Unified mode, my inbox folder shows up twice. If I choose the "All" folders mode, I see only one inbox. The issue started when I was using Ubuntu 12.04, but now I'm on Fedora 19. (I have migrated the folders on /home). I do remember having it not-duplicated, but then it started while still on Ubuntu. I noticed it when using the Converation plugin, but I had previously used the plugin without it happening. I have disabled the plugin and it persists. What I have tried If I close Thunderbird, rename the .thunderbird folder on my /home to something else, then it will create a new config profile, I have to set up everything again, and then it works as expected, see images below: Before resetting Unified vs All Folders After resetting Unified vs All Folders (I'm trying to avoid resetting the profile and creating a fresh new one, because the server -- MS Exchange -- doesn't support IMAP labels, so I'd lose all the tags on my messages, and I have organized it based on tags instead of folder).

    Read the article

  • Can't ping Ip over bridge

    - by tmn29a
    I'm unable to ping another host over a bridge I created, I can't see the error -.- It's a remote machine running debian stable with some backports for which I want to set up DHCP on the new Subnet 172.30.xxx.xxx to be used for KVM-Guests. ifconfig : bond0 Link encap:Ethernet HWaddr e4:11:5b:d4:94:30 inet addr:10.54.2.84 Bcast:10.54.2.127 Mask:255.255.255.192 inet6 addr: fe80::e611:5bff:fed4:9430/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:34277 errors:0 dropped:0 overruns:0 frame:0 TX packets:18379 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2638709 (2.5 MiB) TX bytes:2887894 (2.7 MiB) br0 Link encap:Ethernet HWaddr f2:fc:4d:7f:15:f0 inet addr:172.30.254.66 Bcast:172.30.254.127 Mask:255.255.255.192 inet6 addr: fe80::f0fc:4dff:fe7f:15f0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:252 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:10800 (10.5 KiB) Pings : ping -I br0 172.30.xxx.65 PING 172.30.xxx.65 (172.30.xxx.65) from 172.30.xxx.66 br0: 56(84) bytes of data. --- 172.30.xxx.65 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2017ms ping -I bond0 172.30.254.65 PING 172.30.xxx.65 (172.30.xxx.65) from 10.54.2.84 bond0: 56(84) bytes of data. 64 bytes from 172.30.x.65: icmp_req=1 ttl=64 time=0.599 ms 64 bytes from 172.30.x.65: icmp_req=2 ttl=64 time=0.575 ms 64 bytes from 172.30.x.65: icmp_req=3 ttl=64 time=0.565 ms --- 172.30.x.65 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.565/0.579/0.599/0.031 ms Route : Destination Gateway Genmask Flags Metric Ref Use Iface 172.30.x.64 * 255.255.255.192 U 0 0 0 br0 10.54.x.64 * 255.255.255.192 U 0 0 0 bond0 default 10.54.x.65 0.0.0.0 UG 0 0 0 bond0 default 172.30.x.65 0.0.0.0 UG 0 0 0 br0 The Interface : cat /etc/network/interfaces auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.54.x.84 netmask 255.255.255.192 network 10.54.x.64 gateway 10.54.x.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports bond0 address 172.30.x.66 broadcast 172.30.x.127 netmask 255.255.x.192 gateway 172.30.x.65 bridge_maxwait 0 If you need more info please ask. Thanks for your help !

    Read the article

  • Is it safe to run two instances of svnserve on one repository, or only one?

    - by fredden
    We've two nodes running heartbeat/drbd, and one of the services we're using is subversion. What I want to know is: is it safe to run svnserve on both nodes all the time, or should it only run on the active node? Does svnserve use file-level locking, or is it all in memory? What are the implications of running svnserve without its repositories accessible? Please let me know if this isn't clear, and I'll try my best to rephrase/clarify. :)

    Read the article

  • LVM Extend... not sure the filesystem

    - by Dan
    I would like to extend my LVM partition. First I did lvextend -L +100G /dev/server/home Now I still have to extend the filesystem. The tutorials tell me to use resize2fs, but that only works for ext2 and ext3. I'm not even sure what filesystem I have... fdisk /dev/server/home/ doesn't work... how do I know what kind of filesystem I have on my lvm partition?

    Read the article

  • Verify that a cron job has completed

    - by skylarking
    Is there a command that can be run to verify that a users cron job has run successfully? Platform is Ubuntu 8.04 LTS. I have scripts in /home/useraccount/bin/ running crontab -l while logged in as user results in: # m h dom mon dow command @hourly /home/useraccount/bin/script_1 @hourly /home/locateruser/bin/script_2 I realize scripts could send email or write to a log with a timestamp, but wondering if there is just a way to verify it ran from the command line.

    Read the article

  • IPTables configuration help

    - by Sam
    I'm after some help with setting up IPTables. Mostly the configuration is working, but regardless of what I try I cannot allow localhost to access the local Apache only (i.e. localhost to access localhost:80 only). Here is my script: !/bin/bash Allow root to access external web and ftp iptables -t filter -A OUTPUT -p tcp --dport 21 --match owner --uid-owner 0 -j ACCEPT iptables -t filter -A OUTPUT -p tcp --dport 80 --match owner --uid-owner 0 -j ACCEPT Allow DNS queries iptables -A OUTPUT -p udp --dport 53 -j ACCEPT iptables -A OUTPUT -p tcp --dport 53 -j ACCEPT Allow in and outbound SSH to/from any server iptables -A INPUT -p tcp -s 0/0 --dport 22 -j ACCEPT iptables -A OUTPUT -p tcp -d 0/0 --sport 22 -j ACCEPT Accept ICMP requests iptables -A INPUT -p icmp -s 0/0 -j ACCEPT iptables -A OUTPUT -p icmp -d 0/0 -j ACCEPT Accept connections from any local machines but disallow localhost access to networked machines iptables -A INPUT -s 10.0.1.0/24 -j ACCEPT iptables -A OUTPUT -d 10.0.1.0/24 -j DROP Drop ALL other traffic iptables -A OUTPUT -p tcp -d 0/0 -j DROP iptables -A OUTPUT -p udp -d 0/0 -j DROP Now I have tried many permutations and I'm obviously missing everything. I place them above the in/out bound SSH to/from, so it's not the precedence order. If someone could give me the heads up on allowing only the local machine to access the local web server, that'd be great. Cheers guys.

    Read the article

< Previous Page | 452 453 454 455 456 457 458 459 460 461 462 463  | Next Page >