Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 458/534 | < Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465  | Next Page >

  • Alternate way to connect a vpn through a MIFI

    - by questor
    This has gotten to be a major problem at our company and depending on who I ask, the problem either does not really exist (mfr. and vendor) or is insoluble ( according to most users including techs who know how to prove their point). The problem involves getting a normal Windows 7 system to connect to a normal Server 2008 R2 Server over a cellular router (usually called a Mifi). A very few brands/models appear to work but the majority cannot make the connection. Since it is a cellular device, there are many variables that come into play and I wondered if anyone had ever found a consistent way to either make one work or else prove to the providers that their equipment was at fault. They all specifically state “VPN use” on the sales brochures. But few if any work. And those that do are not reliable. From a standpoint of pure knowledge, I just wondered if anyone knew the real reason why they fail? Pptp, L2tp, IPsec doesn’t matter. I have not tried Shrew or OpenVPN and am using strictly MS Windows protocols. Plenty of Google Searches back up my complaints but none seem to be any closer to knowing "why" they fail, just that they do. This is a "quest for knowledge"question. I don't expect a solution. Just a reason for the problem if anyone has any ideas.

    Read the article

  • Redis 2.0.3 would not let go of deleted appendonly.aof file after BGREWRITEAOF

    - by Alexander Gladysh
    Ubuntu 10.04.2, Redis 2.0.3 (more details at the end of the question). My AOF file for Redis is getting too large, to the point where it soon would threaten to take whole free disk space on my small-HDD VPS box: $ df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda 32G 24G 6.7G 78% / $ ls -la total 3866688 drwxr-xr-x 2 redis redis 4096 2011-03-02 00:11 . drwxr-xr-x 29 root root 4096 2011-01-24 15:58 .. -rw-r----- 1 redis redis 3923246988 2011-03-02 00:14 appendonly.aof -rw-rw---- 1 redis redis 32356467 2011-03-02 00:11 dump.rdb When I run BGREWRITEAOF, the AOF file shrinks, but disk space is not freed: $ ls -la total 95440 drwxr-xr-x 2 redis redis 4096 2011-03-02 00:17 . drwxr-xr-x 29 root root 4096 2011-01-24 15:58 .. -rw-rw---- 1 redis redis 65137639 2011-03-02 00:17 appendonly.aof -rw-rw---- 1 redis redis 32476167 2011-03-02 00:17 dump.rdb $ df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda 32G 24G 6.7G 78% / Sure enough, Redis is still holding the deleted file: $ sudo lsof -p6916 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ... redis-ser 6916 redis 7r REG 202,0 3923957317 918129 /var/lib/redis/appendonly.aof (deleted) ... redis-ser 6916 redis 10w REG 202,0 66952615 917507 /var/lib/redis/appendonly.aof ... How can I workaround this issue? I can restart Redis this time, but I would really like to avoid doing this on a regular basis. Note that I can not upgrade to 2.2 (upgrade to 2.0.4 is feasible though). More information on my system: $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.2 LTS Release: 10.04 Codename: lucid $ uname -a Linux my.box 2.6.32.16-linode28 #1 SMP Sun Jul 25 21:32:42 UTC 2010 i686 GNU/Linux $ redis-cli info redis_version:2.0.3 redis_git_sha1:00000000 redis_git_dirty:0 arch_bits:32 multiplexing_api:epoll process_id:6916 uptime_in_seconds:632728 uptime_in_days:7 connected_clients:2 connected_slaves:0 blocked_clients:0 used_memory:65714632 used_memory_human:62.67M changes_since_last_save:8398 bgsave_in_progress:0 last_save_time:1299014574 bgrewriteaof_in_progress:0 total_connections_received:17 total_commands_processed:55748609 expired_keys:0 hash_max_zipmap_entries:64 hash_max_zipmap_value:512 pubsub_channels:0 pubsub_patterns:0 vm_enabled:0 role:master db0:keys=1,expires=0 db1:keys=18,expires=0

    Read the article

  • no disk io but iowait very high

    - by Dan
    there is no disk io going results of iotop Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO< COMMAND 1 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % init [3] 1930 be/4 named 0.00 B/s 0.00 B/s 0.00 % 0.00 % named -u ~d/run-root 1931 be/4 named 0.00 B/s 0.00 B/s 0.00 % 0.00 % named -u ~d/run-root 1932 be/4 named 0.00 B/s 0.00 B/s 0.00 % 0.00 % named -u ~d/run-root 1933 be/4 named 0.00 B/s 0.00 B/s 0.00 % 0.00 % named -u ~d/run-root 1810 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % sh /usr/b~user=mysql 9795 be/4 apache 0.00 B/s 0.00 B/s 0.00 % 0.00 % httpd 8004 be/4 apache 0.00 B/s 0.00 B/s 0.00 % 0.00 % httpd 3226 be/4 postfix 0.00 B/s 0.00 B/s 0.00 % 0.00 % tlsmgr -l -t unix -u 8154 be/4 apache 0.00 B/s 0.00 B/s 0.00 % 0.00 % httpd 9759 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % find -name php.ini 9249 be/4 apache 0.00 B/s 0.00 B/s 0.00 % 0.00 % httpd 1756 be/4 postfix 0.00 B/s 0.00 B/s 0.00 % 0.00 % psa-pc-re~@localhost 1863 be/4 mysql 0.00 B/s 0.00 B/s 0.00 % 0.00 % mysqld --~mysql.sock 3123 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % crond 1758 be/4 postfix 0.00 B/s 0.00 B/s 0.00 % 0.00 % psa-pc-re~@localhost 1865 be/4 mysql 0.00 B/s 0.00 B/s 0.00 % 0.00 % mysqld --~mysql.sock 1592 be/4 sw-cp-se 0.00 B/s 0.00 B/s 0.00 % 0.00 % sw-cp-ser~ver/config 7612 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % sshd: root@pts/0 7614 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % sftp-server 7615 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % -bash 1602 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % sshd 8003 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % httpd but iowait very high ? iostat report avg-cpu: %user %nice %system %iowait %steal %idle 0.83 0.00 0.13 13.83 0.00 85.20 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn server runs like a snail what could be wrong here ? thanks

    Read the article

  • Windows won't sleep after booting from grub

    - by mkasberg
    I recently added a second hard drive to my computer and I am using it do dual-boot Linux (Ubuntu 12.04) with Windows 7. Both hard drives are SATA. I am using the default grub bootloader on my second hard drive. The windows drive is unmodified. To get to grub, I changed the hard disk boot priority in my BIOS (P35-DS3L) to boot from the second drive. The problem I'm having is that when I boot to Windows 7 (on sda) from grub (on sdb), Windows 7 will not go to sleep (from the start menu). The display shuts off momentarily as if its going to sleep, then comes back on and displays the switch-user screen. Powercfg -lastwake does not show anything. I am sure that this is related to booting from grub on sdb because when I change the hard disk boot priority in the BIOS to boot from my (unmodified) Windows hard disk, the computer goes to sleep fine. It occurred to me that installing grub on sda might solve the problem, but I'd rather not since I like to have my windows hard disk unmodified so that booting to it from the BIOS boots directly to windows. A possible work around is to use the BIOS as a bootloader, by pressing F8 to select the boot device. Still, I'd like to know why the problem is happening in the first place.

    Read the article

  • Cannot Install Bootcamp on Mac Fusion Drive

    - by user3377019
    I have two drive installed in my mid-2013 Macbook pro. It is running osx maverick. I set the two drives (an ssd and a regular HD) up using the fusion drive (following the diy fusion drive guides out there). I went ahead and created a 40gb partition to host my windows install. I removed the SSD, installed windows, then reinstalled the SSD. As soon as the ssd was placed back in the bootcamp partition stopped booting. I get a blinking cursor on a black screen. I checked out the partition info in disk utility and it appears that the windows partition is not marked bootable. Below is some info I managed to gather. I am wondering if there is a way to fix the partition table so my bootcamp will boot. /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage 119.7 GB disk0s2 3: Apple_Boot Boot OS X 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data BOOTCAMP 40.0 GB disk1s2 3: Apple_CoreStorage 459.2 GB disk1s3 4: Apple_Boot Boot OS X 650.0 MB disk1s4 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD *573.4 GB disk2 Name : BOOTCAMP Type : Partition Disk Identifier : disk1s2 Mount Point : /Volumes/BOOTCAMP File System : Windows NT File System (NTFS) Connection Bus : SATA Device Tree : IODeviceTree:/PCI0@0/SATA@1F,2/PRT1@1/PMP@0 Writable : No Universal Unique Identifier : 584BAED6-4C46-4F18-93B3-957F6E27003C Capacity : 40 GB (39,998,980,096 Bytes) Free Space : 16.34 GB (16,339,972,096 Bytes) Used : 23.66 GB (23,659,003,904 Bytes) Number of Files : 86,424 Number of Folders : 0 Owners Enabled : No Can Turn Owners Off : No Can Be Formatted : No Bootable : No Supports Journaling : No Journaled : No Disk Number : 1 Partition Number : 2

    Read the article

  • fax server farm architechture

    - by Brian Postow
    I'm not sure this is the right forum for this, but it's not Stackoverflow so... I'm trying to figure out an architecture to solve the following problem, maybe someone here can help: I have a T1 with 23 fax lines coming into the building. I have a computer (Macintosh XServe) running Hylafax. If I had one POTS line, I'd be done. However, I have no idea how to get the T1 into the Mac... Options I've considered: some sort of PCI T1-modem (Does that exist?) Splitting the T1 into 23 POTS lines and then connecting 23 analog modems to the mac, either via an external modem bank (Do they still make those?) or via some sort of external PCI bank, which will allow me to use more than 2 4-port modem cards. Either the T1 or the split POTS lines going into some intermediate device and then transfering the images over IP, or USB to the mac. Really, any other option I can come up with This has GOT to be a problem that someone has already solved, right?

    Read the article

  • simple network between xp & 7 with cross cable problem...

    - by LostLord
    hi my dear friends : i have a simple network between xp & 7 windowses with cross cable (2 pc home)... ===================================================================== the one with 7 is mother and have 2 lan device (onboard + pci) A. onboard is like this when u go to tcp/ip v4 properties:(4 adsl internet) obtain an ip... preferred dns server : 81.91.129.67 alternate dns server : 4.2.2.4 shared...no permission 4 change so every thing is ok for internet on windows 7. B. the other lan pci card that is connected to pc with xp is like this : 192.168.2.11 255.255.255.0 0.0.0.0 empty empry computer name : cougar workgroup : nethome homeNetwork is disabled (i think that is 4 2 pc's with 7 os not xp) every thing is off in network options except file & printer sharing in public area ===================================================================== pc with xp os is like this : 192.168.2.12 255.255.255.0 192.168.2.11 (mean gateway) 4.2.2.4 8.8.8.8 computer name : tiger workgroup : nethome ===================================================================== at last my little net is ok... mean both have internet , both can see each other by their ip (\\192.168.2.11 or \\192.168.2.12) my problem is when in pc with xp type \\cougar it shows an error about network path! but in pc with 7 \\tiger works perfec. what is the problem in system with xp ? in few days ago this network was ok (search by computer name) when both os were xp , so there is no problem with my cable or devices. another problem is i can not find tiger in my network list in 7 pc \ why? is something wrong with my network? thanks 4 future advance best regards

    Read the article

  • needing storage integrity (write/read) test - for BASH

    - by Mr. Bash
    In need of shell scripts / bash commands to verify data integrity of local harddrives, usb-drives, etc, ... Like the famous www.heise.de/download/h2testw; or something that is at least common within repositories. (h2testw writes a specific datastring over and over onto the medium, then reads it again to verify if it was written correctly and displays write/read time/speed.) please no dd if=/dev/random of=/dev/sdx bs=1k && dd if=/dev/sdx of=/dev/null bs=1k since it won't verify if everything was written correctly. It is only a test if read/write is successful to the device. So far, I'm not too happy with badblocks -w -v /dev/sdx1 either, since it seems rather slow and I don't know what it exactly writes, and if it considers wear-leveling on flash media. There is also a program named F3 http://oss.digirati.com.br/f3/ that needs to be compiled. Designed after h2testw, the concept sounds interesting, i'd just rather have it as a ready to go bash script.

    Read the article

  • USB Mouse and Keyboard not working in Linux 4 Tegra

    - by Sijo
    I am a new person in Tegra Linux development. I have Tamontem NG Evaluation board with Tegra 3 Chip. I installed L4T sample file system from NVIDIA tegra Resources (https://developer.nvidia.com/linux-tegra) and installed the file system as described in the documentation provided in NVIDIA site. Already these was an SD card with L4T running. i dont want to change the boot loader. So I copied the boot.scr.uimg to root (/) folder and uImage to boot(/boot/) and it starts booting from the existing SD card. After that while booting, some errors occurred in some Bluetooth devices (there is no bluetooth device in the board). So I disabled Bluetooth by giving the following command sudo mv /etc/init/bluetooth.conf /etc/init/bluetooth.conf.noexec Now the problem is that mouse and keyboard are not working. So i cannot login. Even though i installed desktop, the mouse and keyboard are not working. But mouse and keyboard are enumerating. lsusb command is showing the USB mouse and keyboard. The installed file system is Ubuntu 13.04. Linux Kernel version is 3.1 What to do. Please help.Thanks in Advance.

    Read the article

  • NATing IPv4 while routing IPv6

    - by Hugo
    I've the following setup: client(s) <---> (eth0) router (eth1) <---> wan I have a static IPv4 address and a /48 IPv6 address block. I need to connect all the clients to (wan). Each client will have it's own public IPv6. Meanwhile, I need to NAT those same clients over to (wan). Everything IPv4-related and the NAT are working fine. The IPv6 communication to/from (eth0)<-(clients) works fine, as does the IPv6 communication from (eth1)<-(wan) works fine. To provide IPv6 to all my clients, I've thought of too choices: Having the router as a gateway, which different IP on each interface. This sounds like I need to tell my ISP to route the entire block through that single IP, so it's not really an option. Transparently pass IPv6 packets to/from eth0<-eth1, so all clients can communicate with the upstream gateway (I would actually have a switch here if it weren't for the need to remain IPv4 compatible). So, since I've opted for the second choice, I'm in doubt: How can I pass all IPv6 traffic from eth0 to eth1 transparently? What I need is a level 3 bridge, but linux's bridgeutils create a level 2 bridge (which would bridge ipv4 as well, and I can't have that). This is a DD-WRT device, but it's pretty much an embeded linux, so most suggestions that would work on linux are welcome. Thanks.

    Read the article

  • How can I remotely tell what brand/model internal SCSI card is installed in a machine?

    - by edmicman
    I am doing some consulting work for a previous employer upgrading and migrating old servers to new hardware. There is an existing file server (HP ProLiant DL380) that has an tape backup drive connected; it is using a SCSI interface and I'm pretty sure it's using an internal SCSI card. They are upgrading to a new server hardware (HP ProLiant DL160 G6). The old server is 2U, the new one 1U and we would want to move the tape drive to the new server, too. I'm trying to figure out if the SCSI card in the old server would be able to be installed in the new one or if we'll need to source a new card; mostly I don't know for sure the height of the card and if it's low-profile enough that it would fit in the new server. There is not much of a technical resource onsite and the old server is in-use anyway so I would like to avoid making a trip in myself or trying to have someone onsite pop open the case and tell me what card is there. It's running Windows Server 2003 - is there a way to tell from say Device Manager what make and model the SCSI card might be? Or any other system diagnostic program or something that would give me hardware info like that? Thanks for any info!

    Read the article

  • Cheapest iSCSI SAN for Windows 2008/SQL Server clustering?

    - by MichaelGG
    Are there any production-quality iSCSI SANs suitable for use with Windows Server 2008/SQL Server for failover clustering? So far, I've only seen Dell's MD3000i, and HP's MSA 2000 (2012i), which both are around $6K with a minimal disk configuration. Buffalo (yea, I know), has a $1000 device with iSCSI support, but they say it will not work for 2008 failover clustering. I'm interested in seeing something suitable for failover in a production environment, but with very low IO requirements. (Clustering, say, a 30GB DB.) As for using software: On Windows, StarWind seems to have a great solution. But it's actually more money than buying a hardware SAN. (As I understand, only the enterprise edition supports having replicas, and that's $3000 a license.) I was thinking I could use Linux, something like DRBD + an iSCSI target would be fine. However, I haven't seen any free or low-cost iSCSI software that supports SCSI-3 persistent reservations, which Windows 2008 needs for failover clustering. I know $6K isn't much at all, just curious to see if there are practical cheaper solutions out there. And finally, yes, the software is expensive, but many small business get MS BizSpark, so the Windows 2008 Enterprise / SQL 2008 licenses are completely free.

    Read the article

  • Fast Ethernet module for Cisco 2620

    - by Kenny Rasschaert
    I have a Cisco 2620 Router. It comes with one fast ethernet port built in (circled in red), and one old AUI ethernet module is installed (circled in blue). I figure I can put a transceiver on the AUI interface to get a second RJ45 connector. What I'd really like to have is a second fast ethernet connector. The ideal candidate to achieve this would be the NM-1FE-TX module. Cisco claims on their website that this module is not suitable for the Cisco 2620 and Cisco 2620XM. It says so in "Table 2 Physical Limitation of Serial Modules per Chassis". Indeed, this module was designed for the 3600 series of routers. I've seen claims on the internet, however, of people having this module on a 2620XM, and it being fully functional. This claim gains some credibility because of the fact that in Cisco's own Packet Tracer software, you can install this module on the 2620XM router. I'm looking for a definitive answer. Will this module work on a Cisco 2620? Is there perhaps another way to get a second fast ethernet port on this device?

    Read the article

  • Getting the most out of a Mac mini as a media center

    - by celebritarian
    Hello! I own an old Mac mini from 2006 (maybe early 2007). It's got an Intel Core Solo 32-bits CPU and 512 MB RAM. 160 GB HDD. The GPU is an integrated chip… Currently, my Mini is sitting under my LCD TV (720p). It's plugged in via a DVI to HDMI cable. It's currently running Leopard. And unfortunately, Snow Leopard can't be installed on a device with less than 1 GB of RAM… So, my Mac mini isn't exactly powerful. Also, it's slow and Mac OS X is not a pleasant experience on my Mini right now. It feels slow and heavy. I want to use my Mac mini as a media center/player. I want to be able to play video files in 720p (H.264, Matroska/MOV files). So basically, playing high-def videos is all I want to do with my Mini. What OS should I install? Stick to OS X? Optimize for video playback? Or should I install another OS — like Win XP, Ubuntu or any other Linux dist? Then, will my Mini be able to play 720p videos smoothly, even though the CPU and GPU aren't that powerful and with the limit of 512 MB of RAM? Appreciate all help. Thanks in advance!

    Read the article

  • CD-ROM Cant Be Accessed After Installing VMware Tools on VMware Server 2.0.2

    - by Optimal Solutions
    Using VMware Server 2.02, I set up a new VM (Windows XP Pro) applied all of the updates, added Windows addons from the install CD, etc... I got it to a stable point and up through that point I was able to access the CD-ROM drive (E: on my host). What I never did before was install "VMware Tools" and since it claims to give better mouse and video support, I gave it a shot. What it does is it places the install package in a virtual CD-ROM drive. I ran the install, no errors and it wants a reboot. I log back in after reboot and pop in the install CD for Microsoft Office 2003 and I receive the message "Please Insert A Disc Into Drive D:". Drive D: would be the next logical drive after the C: drive where I chose to install the OS. The message box sits there and if I click "Cancel", to return to Windows Explorer, the status bar seems to blink ever 1/2 second - as if its polling for a CD-ROM drive or something. No bangs or exclamations in the Device Manager for any hardware. I had taken a snapshot prior to the VMware Tools install and upon restoring it, the CD-ROM is back. I made copies of two other VMs, installed the VMware Tools on those VMs and both experienced the same issues: Windows 2003 Server and Windows 7 (32-bit). Has anyone seen this issue and know of a fix for this? It would be nice to have the better graphics and better mouse control AND use my CD-ROM drive as well! Thank you.

    Read the article

  • 1 document pending in printer queue in System Tray that won't go away

    - by White Phoenix
    Edit: I didn't want to do it, but I restarted my computer - cleared the problem right away. Though if I were running a Windows 2003/2008 server, I would hate to have to restart the domain controller just to get rid of this irritating problem. If I run into this problem again, I'm going to try that remove printer/reinstall printer thing. Thanks for your help @Psychogeek. Points for your attempt. Running Windows 7, 32-bit Professional. My printer is an HP OfficeJet Wireless 8500. It's connected to my network wirelessly through TCP/IP as a standalone device. I was having some print problems awhile back and had to do some print spooler stuff as part of my troubleshooting (stopping the Print Spooler service, clearing the print spooler files from C:\Windows\System32\spool\PRINTERS and then restarting the service). I've finally narrowed it down to it being application specific, so that's that. However, as a leftover from all that troubleshooting, my printer icon is stuck in the tray - when I mouseover the icon, Windows says that there is 1 document(s) pending for my username. However, when I open up that printer's queue, there's nothing in there. I restarted the Printer Spooler service and also checked C:\Windows\System32\spool\PRINTERS if there's anything in there - nothing. I did a quick Google search and an answer from one of those "reps" at the Microsoft Socialnet site says for me to uninstall and reinstall the printer. The funny thing is, when I send print jobs, they print just fine - that 1 mystery document stuck in queue isn't stopping anything from happening. Short of having to do that, are there any other quick troubleshooting steps I may be missing?

    Read the article

  • Copying large files from USB devices to the internal hard drive fails on Mac OS

    - by John M. P. Knox
    I have a second-generation 13" MacBook Air running Mac OS X 10.6.6 with a 2.13 GHz processor, 4 GB of RAM, and a 256 GB SSD hard disk. I often get failures when I attempt to copy a large file or large collection of files from an external USB drive (typically a "Firewire" generation Drobo) to the internal drive. The failure behaves almost exactly as if I had pulled the USB cable from the computer in mid-transfer. I get a warning that I have removed the hard disk improperly. After this event, the drive no longer appears mounted in the finder, and I have to unplug and reinsert the USB cable to mount the drive again. I have also seen a similar problem when using Aperture 3 to import a large number of photos and videos from a USB Compact Flash card reader. The import will fail and I will have to unplug the Card Reader and import the missing items. Oddly, reversing the direction of the copy seems pretty reliable. I've never had a problem copying a large file to a USB device, meaning that I have quite a few large files which are stranded on my Drobo. Model Identifier: MacBookAir3,2 Boot ROM Version: MBA31.0061.B01 I have seen a similar issue reported on Apple's website: http://discussions.apple.com/thread.jspa?threadID=2648590&tstart=0 The only suggested resolutions there seems to be switching to another form of connectivity (e.g. firewire, which does not exist on MacBook Air), or downgrading to Mac OS 10.6.4, or reverting the USB kernel extensions to the 10.6.4 versions: http://discussions.apple.com/message.jspa?messageID=12566073#12582956 I'm not too keen on the idea of downgrading kernel extensions. Does anyone know of a hardware revision without this issue that I can trade up to? Are there any other potential solutions out there?

    Read the article

  • Is it possible to mount a disk image, created with dd, to a directory on a mounted external usb hdd?

    - by Keeper Hood
    I have an image of my home (/dev/sda3) partition, which I've created using the "dd" command. dd if=/dev/sda3 of=/path/to/disk.img I've deleted the home partition via gparted in order to enlarge my /dev/root partition. Then I've recreated the /dev/sda3 partition which is smaller in size then the one I've backed up to the image. I was wondering since I have a 2TB external HDD, could it be possible to mount my backed up image on the external HDD and then copy the files into the /home directory. Since the external HDD would be already in a "mounted state", I'm unsure whether this is a good idea, mounting on a mounted device. I'm running Slackware 13.37 (64bit). used ext4 on all the partitions. resized the root partition with gparted live cd. I've tried mount -t ext4 /path/to/disk.img /mng/image -o loop It gave me an fs error (wrong fs type, bad option, bad superblock on dev/loop/0) Then i did dmesg | tail which outputs: EXT4-fs (loop0) : bad geometry: block count 29009610 exceeds size of defice (1679229 blocks) I have no idea what to do, I want to restore my /home data from the image I've backed up.

    Read the article

  • Exchange 2003 IMAP not working for some users

    - by John Gardeniers
    We normally don't have a need for IMAP connections from outside the company network but in order to allow a one user to use IMAP on a portable device I've turned it on and opened port 993 on the firewall. When the user in question was unable to get connected I tested this using Outlook remotely. Start by creating a new IMAP account in Outlook using a test account. No problems, it worked perfectly. Now try the same thing using the account of the user who actually needs to connect and it's a no-go. Outlook simply keeps prompting for logon credentials. Next I tried using my own account and that too failed. Testing with a couple of other accounts worked perfectly. Interestingly enough, with my own account I've used IMAP on a MAC before (internally) without a problem and I'm not aware of anything that has changed which could affect IMAP on my account. Checking the user settings in ADUC showed that all accounts have the same Exchange protocol settings. Specifically, IMAP is enabled. A check of the event logs on the server reveals no entries for the connection attempts, making this kind of difficult to debug. Has anyone here encountered such a situation and, even more importantly, what caused it?

    Read the article

  • Updating Dell PowerEdge firmware on Ubuntu?

    - by Shtééf
    The company I work for recently got hands on a batch of second hand PowerEdge SC1425 machines. We'd like to put these to good use. Our operating system of choice is Ubuntu Server 10.04 64-bit, which installs just peachy on this type of machine. Now I'd like to install the firmware updates from Dell, which are apparently marked as recommended. This includes the updates for the BIOS, the BMC, and possibly some other hardware. I find it incredibly difficult to locate the files on the Dell website, and install any of them on an Ubuntu system: I downloaded the file OM_6.2.0_SUU_A01.iso. I believe I've read that the SUU DVD should be able to update any recent PowerEdge. Is this correct? Is this the latest version? Besides the version number, does A01 have any meaning? Is this image bootable? (At the moment, I just nosed around with a loop device mount.) Running /bin/bash ./suu from the DVD, I get: # /bin/bash ./suu ./suu: line 262: ./java/linux/i386/bin/java: No such file or directory The file exists and is executable, though. But I cannot execute it directly from the shell either.

    Read the article

  • How to change controller numbering/enumeration in Solaris 10?

    - by Jim
    After moving a Solaris 10 server to a new machine, the rpool disk is now c1t0d0. We have some third party applications hard coded for c0t0d0. How can I change the controller enumeration on this machine? There is no longer a c0. I've tried rebuilding the /etc/path_to_inst, but the instance numbers don't seem to match up with the controller numbers. Also, it's not clear if i86pc platforms use this file. I've tried devfsadm -C to clear the dangling links, but I'm not sure how to cause devfsadm to start numbering from 0 again (or force certain devices in the tree to a specific controller number). Next I am going to try to create the symlinks manually in /dev/dsk and rdsk to point to the correct /devices. I feel like I am going way off path here. Any suggestions? Thanks Update: This is on virtual ESXi hardware with an additional pass-through HBA. There is no controller 0 on the machine, that is for sure. devfsadm -C cleans up all the c0 device symlinks but keeps the already linked controllers at their current ids.

    Read the article

  • New Computer won't boot up

    - by Reggie
    I brought new components and put a computer together. I installed win7(32bit) and everything was working as it should. However my case came with two USB3 front ports I could not connect because of motherboard did not support USB3, so I swapped out the board for a new motherboad with USB3 connection. Now I put everything back together but it won't bootup. "Memory Ok" light stay on. Motherboad LED is on. There is power, all fans are on but I got no display. There is no activity in back of the systems, none of the peripheral connection in the back are working. I have tried the following but to no avail. Reboot multiple times Unplug power and plug the power back Reset the CMOS battery..let it stays out for 10 minutes or more. Unplug all peripheral device but no luck Reset memory..... nothing happen The only thing I did not do was remove the cpu...but I unplug everything else. Please help, thank you.

    Read the article

  • Why is the link between my switch and my router always negotiating half-duplex mode?

    - by Massimo
    I have a Cisco 2950 switch which has one of its ports connected to an Internet router provided by my ISP; I have no access to the router configuration, but I manage the switch. If I leave all switch ports with their default setup (auto-negotiation of speed and duplex mode), this link always connects at 100 MBit/s, but in half-duplex mode. I've tried replacing the cable, and also moving the link to another switch port: the result is always the same. A different device connected to the same port (or to any switch port, really) shows no problem at all. It could be guesed that someone configured the router to only connect in half-duplex mode... BUT, here's the catch: if I manually force the switch port to full-duplex mode (duplex full in the interface configuration), the link goes up, stays up and is completely stable. So: The connection is not forced to half-duplex mode by the router, otherwise it would not connect at all if I force the switch end to full-duplex. There is no actual link problem, otherwise the full-duplex connection would not go up or would at least show some errors. But if I leave the port free to auto-negotiate, it always connects in half-duplex mode. Why?

    Read the article

  • Ubuntu xrandr rotate issue

    - by user83544
    I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

    Read the article

  • WD my cloud 4th is Super Slow

    - by Saduser
    I am using a WD my cloud 4Tb and I have read other posts about users complaining about getting only 10Mb per second. My problem is that I am getting about 100kb/s to transfer a 125gb iPhoto library. Estimated time is 11 days to transfer this file. This is unacceptable. On the back of the WD cloud I am getting a solid green light and from what I read this means that I am on a gigabyte network. I have mac book pro running Mac OS Mavericks. I have tried 4 different cables and turned off my router firewall. I don't run anti-virus nor any firewall on the mac. Other things I have checked: direct connection to both router and WD cloud device. Tried wireless but it is even slower. Previously I was able to transfer a 55Gb iPhoto library in 14 hours which I felt was acceptable. I figured it would take approximately double the time to transfer the 125gb file but 11 days is ridiculous. Any other suggestions? Anything else I can check (how to check it) what is the bottle neck?

    Read the article

< Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465  | Next Page >