Search Results

Search found 23783 results on 952 pages for 'edit and continue'.

Page 459/952 | < Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >

• How to make ssh/rsync/etc use a VLAN network interface?

  - by Annan

  A company I work for has a number of virtual servers with ElasticHosts. They are setup in such a way that eth1 is on a private VLAN connecting them to each other. This is so backups sent between servers are not charged at the same rate as external data transfer. My understanding of how VLANs and network interfaces work is sketchy at best. How can I make ssh, rsync, etc. transfer data through the VLAN? My final solution: I spent a while trying to figure this out, For all servers involved, edit /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static ONBOOT=yes HWADDR=YOUR_MAC_ADDR IPADDR=192.168.0.100 NETMASK=255.255.255.0 Where HWADDR should already be set and the last octate of IPADDR should be different from each other. Then run, on all servers /etc/init.d/network restart After this the IP addresses specified by IPADDR can be used directly as any other IP address.

  Read the article

• Auto Log-Off Windows users - Windows 2003 domain

  - by thehatter

  I am trying to make windows clients automatically log off after some time, I have been trying to use the winexit.scr which I have seen working else where in a similar environment. After working though these instructions (I did read the comments and notice the original ADM provided is buggy) I've had no joy what so ever! Winexit.scr refuses to read any settings in the registry, even while using a test account I can access the required reg key(s); edit, add, and remove values. Essentially winexit.scr always uses it's default values: 30 second timeout, no forced log-out. What I really want is a 30 minute timeout with a forced log-out, closing all the users apps etc. I've tried removing and re-adding the ADM template, creating the GPO from scratch several times, giving various registry permissions - including full control to "Everybody" just for fun! Oh, clients are all win XP SP3, DC is win 2003 R2 SP2. So, can anybody suggest something? Cheers!

  Read the article

• Oracle Fusion Supply Chain Management (SCM) Designs May Improve End User Productivity

  - by Applications User Experience

  By Applications User Experience on March 10, 2011 Michele Molnar, Senior Usability Engineer, Applications User Experience The Challenge: The SCM User Experience team, in close collaboration with product management and strategy, completely redesigned the user experience for Oracle Fusion applications. One of the goals of this redesign was to increase end user productivity by applying design patterns and guidelines and incorporating findings from extensive usability research. But a question remained: How do we know that the Oracle Fusion designs will actually increase end user productivity? The Test: To answer this question, the SCM Usability Engineers compared Oracle Fusion designs to their corresponding existing Oracle applications using the workflow time analysis method. The workflow time analysis method breaks tasks into a sequence of operators. By applying standard time estimates for all of the operators in the task, an estimate of the overall task time can be calculated. The workflow time analysis method has been recently adopted by the Applications User Experience group for use in predicting end user productivity. Using this method, a design can be tested and refined as needed to improve productivity even before the design is coded. For the study, we selected some of our recent designs for Oracle Fusion Product Information Management (PIM). The designs encompassed tasks performed by Product Managers to create, manage, and define products for their organization. (See Figure 1 for an example.) In applying this method, the SCM Usability Engineers collaborated with Product Management to compare the new Oracle Fusion Applications designs against Oracle’s existing applications. Together, we performed the following activities: Identified the five most frequently performed tasks Created detailed task scenarios that provided the context for each task Conducted task walkthroughs Analyzed and documented the steps and flow required to complete each task Applied standard time estimates to the operators in each task to estimate the overall task completion time Figure 1. The interactions on each Oracle Fusion Product Information Management screen were documented, as indicated by the red highlighting. The task scenario and script provided the context for each task.  The Results: The workflow time analysis method predicted that the Oracle Fusion Applications designs would result in productivity gains in each task, ranging from 8% to 62%, with an overall productivity gain of 43%. All other factors being equal, the new designs should enable these tasks to be completed in about half the time it takes with existing Oracle Applications. Further analysis revealed that these performance gains would be achieved by reducing the number of clicks and screens needed to complete the tasks. Conclusions: Using the workflow time analysis method, we can expect the Oracle Fusion Applications redesign to succeed in improving end user productivity. The workflow time analysis method appears to be an effective and efficient tool for testing, refining, and retesting designs to optimize productivity. The workflow time analysis method does not replace usability testing with end users, but it can be used as an early predictor of design productivity even before designs are coded. We are planning to conduct usability tests later in the development cycle to compare actual end user data with the workflow time analysis results. Such results can potentially be used to validate the productivity improvement predictions. Used together, the workflow time analysis method and usability testing will enable us to continue creating, evaluating, and delivering Oracle Fusion designs that exceed the expectations of our end users, both in the quality of the user experience and in productivity. (For more information about studying productivity, refer to the Measuring User Productivity blog.)

  Read the article

• Drupal 7 Advice Needed: "Portal" Creation

  - by WernerCD

  Question: What is the best game plan for building what I want. I'm rebuilding the company intranet and am trying to get our "Portals" system re-created in Drupal. I'm trying to learn Panels, because thats what I think would do this, but I just can't seem to get it working. Menu at top, drop down lists for various webpages, tools, internal applications... and Department Portals. When you click on a department portal, you get the same menu at top... and on the main part of the page you have a menu on the left, with content on the right. Menu stays on the left, content loads next to it. Each Portal has its own menu and content (least of which is "Home"). Ultimately, I'd like to be able to say - users with role "Foo" can add/edit/delete Portal Bar. - Each Portal starts with a "Home" - Each Portal has its own Menu tree's. (Picture 2 above has a < ul for video tutorials that would be a second level menu. So more than one deep.) - Content on the right side of the portal should be flexible (Video, PDF via fileviewer, etc) - Portal Bar should have its own Folder to contain it's content. I'm trying to do this in Panels, but I can't seem to put the pieces together in my mind and in practice. I hope I'm making sense, because the dizzying array of stuff is killing me lol.

  Read the article

• Rails: Law of Demeter Confusion

  - by user2158382

  I am reading a book called Rails AntiPatterns and they talk about using delegation to to avoid breaking the Law of Demeter. Here is their prime example: They believe that calling something like this in the controller is bad (and I agree) @street = @invoice.customer.address.street Their proposed solution is to do the following: class Customer has_one :address belongs_to :invoice def street address.street end end class Invoice has_one :customer def customer_street customer.street end end @street = @invoice.customer_street They are stating that since you only use one dot, you are not breaking the Law of Demeter here. I think this is incorrect, because you are still going through customer to go through address to get the invoice's street. I primarily got this idea from a blog post I read: http://www.dan-manges.com/blog/37 In the blog post the prime example is class Wallet attr_accessor :cash end class Customer has_one :wallet # attribute delegation def cash @wallet.cash end end class Paperboy def collect_money(customer, due_amount) if customer.cash < due_ammount raise InsufficientFundsError else customer.cash -= due_amount @collected_amount += due_amount end end end The blog post states that although there is only one dot customer.cash instead of customer.wallet.cash, this code still violates the Law of Demeter. Now in the Paperboy collect_money method, we don't have two dots, we just have one in "customer.cash". Has this delegation solved our problem? Not at all. If we look at the behavior, a paperboy is still reaching directly into a customer's wallet to get cash out. EDIT I completely understand and agree that this is still a violation and I need to create a method in Wallet called withdraw that handles the payment for me and that I should call that method inside the Customer class. What I don't get is that according to this process, my first example still violates the Law of Demeter because Invoice is still reaching directly into Customer to get the street. Can somebody help me clear the confusion. I have been searching for the past 2 days trying to let this topic sink in, but it is still confusing.

  Read the article

• MySQL mistake with grant option

  - by John Tate

  I am unsure reading the MySQL documentation if creating a user with the GRANT option will give them the power to create users and grant privileges, or change the privileges of other users databases. I have been creating databases for users like this CREATE DATABASE user; USE user; GRANT ALL PRIVILEGES ON *.* TO 'user'@'localhost' IDENTIFIED BY 'password' WITH GRANT OPTION; Is this the best way of doing it or have I just given my users too much control? They are people I am hosting sites for. Thankfully at this point they are trustworthy. I use quotas. Edit: I have realized I have been granting users access to all databases. This is obviously stupid I should be using this: GRANT ALL PRIVILEGES ON database.* to 'user'@localhost' IDENTIFIED BY 'password' What is the simplest way to revoke privileges for every user except root so I can quickly end this catastrophic rookie mistake?

  Read the article

• How to start/stop iptables in Ubuntu 12.04?

  - by imwrng

  I am using Ubuntu 12.04 . while learning some new things about iptables i cant through this . see at the image . while i am trying to start ,its saying as root@badfox:~# iptables -L -n -v Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination root@badfox:~# service iptables stop iptables: unrecognized service root@badfox:~# service iptables start iptables: unrecognized service Source: http://www.cyberciti.biz/tips/linux-iptables-examples.html Why i am getting like this ? EDIT: So my firewall already started but why i am not getting the output as i mentioned in the link at source link in first workout. . Here is my output root@badfox:~# sudo start ufw start: Job is already running: ufw root@badfox:~# iptables -L -n -v Chain INPUT (policy ACCEPT 4882 packets, 2486K bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 5500 packets, 873K bytes) pkts bytes target prot opt in out source destination root@badfox:~#

  Read the article

• Updating large icon in iTunes Connect

  - by Shaggy Frog

  Just wanted to see if I understand properly how/when one can change the "Large icon" for their iOS app in iTunes Connect. Questions are in bold below. To start, first the facts (as I gather) from version 6.6 of the iTC guide (March 2, 2011): The Large Icon is a "locked" piece of version information "You will only be permitted to edit Locked version information when your app is in an Editable state" The "Editable" states are: Prepare For Upload Waiting For Upload Waiting For Review Waiting For Export Compliance Upload Received Rejected Developer Rejected Invalid Binary Missing Screenshot Am I missing anything up until this point? If not, then am I correct to say that the only time I can change an app's Large Icon is when I update the application? Here's a more specific use case: My app is currently on sale, version 2.0 I have version 2.1 ready, and I want the update to coincide with a sale, so I also put a "SALE" banner on top of my large icon (what most devs are doing) I have to upload this "SALE" Large Icon when I upload the binary. If I wait until it's been reviewed, it's too late, and I'll have developer-reject the binary so I can fix it. Is this correct? Say I want the sale to last a week. So at the end of that week, I'll want to switch my Large Icon back to the pre-"SALE" version. Will I necessarily have to upload a new binary at that time? (Also posted on the Developer Forums, but it's getting no love there...)

  Read the article

• App to make a video from photos?

  - by chtfn

  I was wondering what could be a good app (with a GUI ;) ) for making a video from a bunch of photos or images, to create a time-lapse video, or a stop-motion animation, or even a video like this one. The idea is to set a really small time between each photo, but also to be able to change this time every so often, or add some effects, to make the succession smoother in particular. What would be perfect is a function that allows automatic cropping of the photos as well as exposure adjustment so they all have the same background and so the time-lapse video looks smoother. I know about the slide show app "Imagination" but the interval can not go under one second. Cheers! Edit: here is my progress, also thanks to the first answer: I tried Luciole, it is really simple and promessing, but pretty buggy, and I only could export an average video in .dv format (mpg2 and avi don't work). Apparently, it has difficulties when changing the fps. I also tried StopMotion: also pretty buggy, I had to go into preferences and modify the encoding commands to get a result, but it's the best result I got so far. But none of those has effects to make transitions smoother... I tried several diaporama apps: Imagination doesn't handle more than 1 image per second; PhotoFilmStrip (repo version and latest version from website): same problem even though you can go down to 0.1 second per image, it still behaves wierdly (going back to 1 second automatically); Videoporama: doesn't start at all on 12.04. Any other idea, folks?

  Read the article

• LDAP + LTSP 12.04

  - by us3r

  On ubuntu 12.04 i have some kind of problem with LTSP and LDAP. Sometimes I can log to the server, but sometimes I cant (window freezes on LDM) from thin client. Everything is ok when I log to the server like the local machine, but I have some kind of problem on thin client. pam_mkhomedir.so creates home dir, but i cant log..because Nothing happened - ldm freezes. This problem doesnt exist for "local" users (unix accounts) and on first logged LDAP user. It's important to mention that in log I can see nothing special. Does anybody have a problem with ltsp + ldap on ubuntu 12.04? There wasn't any problem on the previous versions. ps sorry for my english skills ;) EDIT: When LDM freezes in the logs there is something: May 17 11:59:52 bar sshd[6066]: Accepted password for student2 from 192.168.100.22 port 44000 ssh2 May 17 11:59:52 bar sshd[6066]: pam_unix(sshd:session): session opened for user student2 by (uid=0) May 17 12:00:03 bar sshd[6315]: subsystem request for sftp by user student2 And nothing other for this user.

  Read the article

• BSOD Error When Running Windows Phone Emulator

  - by Akshat Mittal

  I am getting a BSOD Error when Running Windows Phone 7.1 Emulator on Windows 7 Ultimate 64bit, Each time I run the Emulator, it Results in Blue Screen. This is a Fresh Install, This Error also Occurred with my last Windows Install (That is why I formatted the Windows Again), I have already Tried to Re-install it, it also shows "Windows Phone Emulator is Doing a Complete OS boot" (Even at Fresh Install, I know it happens when using Unlocked Emulator Images). I am not able to Test any of my app. Please Help !! EDIT: I am not Running a VM, it is on a Physical Machine.

  Read the article

• Home folder only SFTP connection has limited access

  - by Tomasz Durka

  I have configured sftp access for user using this guide: Linux shell to restrict sftp users to their home directories? I have problem though. I have taken all steps. I have chown'ed root:user the home folder and I set permissions to 755. I can login normally using SFTP, however I can NOT transfer files, can NOT mkdir directories. If I change permissions to 777 it's ok do edit everything. However this is the thing I don't want. Additionally after exiting sftp and reconnecting then connection is reset by peer (due to setting 777). Anyone had similar problem? What I am doing wrong?

  Read the article

• Error installing Windows7 64 bits on VirtualBox

  - by MetaDark

  I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

  Read the article

• Steps to send patch to Launchpad

  - by Alois Mahdal

  With a Git/Github background and knowing very little about Bazaar VCS, I would like to occasionally report a bug to Launchpad and even send a patch. I'd like to do it in a "proper" way so that it's ready for merging or improvement while not getting in way. I can't seem to find a decent simple How-to suited for my needs. So what I did so far: I have created a Launchpad account, reported the bug, installed Bazaar and setup SSH keys etc. Now if it was Github, I'd fork the repo, clone the forked repo, create a sanely named branch and do the work, commit + push, create a pull request using Github WUI. But it's not Github, and both LP and Bazaar architectures seem quite different from their Github/Git cunterparts. So could a kind soul save me from drowning in tons of documents and complile a straightforward step path, mainly the second part? Possibly including relevant CLI commands when they are needed? Edit: It seems that I should clarify if I'm asking specifically about Ubuntu packages (whatever it means) or Launchpad packages. I don't really care much about distinction between Ubuntu packages and non-Ubuntu packages. Any software could be in Ubuntu today and out of it tomorrow, or vice-versa. The development is what matters much more than distribution. Ao I was assuming that not every single package distributed in Ubuntu is hosted on Launchpad, an "official" or "default" workflow for Launchpad exists (well if all devs can agree on using Bazaar, why couldn't most of them agree on a patching workflow?), so I'm asking about the Launchpad way, not the Ubuntu way. And I chose AU because since the intersection is vast, I guess it's pretty on topic here.

  Read the article

• Why is wireless slow with Atheros AR9285?

  - by Luke

  I know there are many posts like this, however none of the fixes I have found have worked. I had the issue on 11.04, and after having no luck fixing it decided to try 12.04 however this has not fixed the problem. I'm using a Lenovo IdeaPad, the network card is a Atheros Communications AR9285. edit add outputs: sudo iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"NETGEAR-PLOW" Mode:Managed Frequency:2.437 GHz Access Point: E0:91:F5:7D:1B:BA Bit Rate=65 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:77 Invalid misc:63 Missed beacon:0 eth0 no wireless extensions. lspci -nnk | grep -iA2 net 06:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Lenovo Device [17aa:30a1] Kernel driver in use: ath9k -- 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 Thanks

  Read the article

• Video compression artifacts in Flash

  - by lvanderhart

  This only started happening in the past two days, which seems very odd to me. Everything worked flawlessly up until now, and I use my my computer as my primary TV. Flash video from Hulu and Amazon, for no apparent reason, now have lots of artifacts in them. Some scenes are ok, but some are completely scrambled and unwatchable. My connection is a 15mb fios, and bandwidth tests indicate my connection speed is ok. I've tried the latest production version of Flash, as well as the 10.1RC4. Same problem. Enabling or disabling hardware acceleration in Flash makes no difference (with the scrambling issue, quality is better overall with hardware). Using a different H264 codec doesn't clean up the issue, although the scrambling does look different. I'm kind of stumped. The only thing I can think of now is to reinstall windows, which is obviously a drastic step. Edit: Forgot to say: Windows 7, Athlon 64X2, Geforce GTS 250

  Read the article

• Suddely internet is not accessible

  - by user189708

  I am going crazy here. One day everything was working fine. I turned pc off and went to sleep. Next day turn pc on and cannot access internet (from any browser). The situation is: I cannot open any webpage from browser (tried Firefox and Epiphany) and cannot receive emails in thunderbird. BUT if I run firefox from console as sudo, I can use it as usual. I can access Skype and pretty much any other network stuff (like installing software with apt-get etc.), also if I use Astrill VPN software I can access webpages even running without sudo. I haven't install any software or anything like that for several days = I have not a clue what could cause this. Just by the way, other Win PC in our home has no issue. Here is what I have tried to fix this: I have tried to restart my pc, router, modem - multiple times I have tried to change permissions to my firefox profile I have tried to completely re-install firefox and start with blank profile, thus no addons I have tried to change /etc/resolv.conf to an IP of my router (it was 127.0.1.1) I have tried to change my hostname (from tomino-NB to tominoNB) I think I might try even more stuff. None of it works. Can someone please try to help me. Thank you UPDATE 1: I have tried this: Removing resolv.conf - Didn't help Also "ping" and "dig" commands cannot resolve host UPDATE 2: I have tried to edit nameservers in resolv.conf but still no effect. I can ping router as well as I can ping outside IP. So definitely just some DNS issue. Is it possible that something is rewriting path to resolv.conf and using different file? UPDATE 3: I have just restarted PC and everything works now... resolv.conf went back to nameserver 127.0.1.1 . I have no clue what happened that it works again...

  Read the article

• Know Your Service Request Status

  - by Get Proactive Customer Adoption Team

  Untitled Document To monitor a Service Request or not to monitor a Service Request... That should never be the question Monitoring the Service Requests you create is an essential part of the process to resolve your issue when you work with a Support Engineer. If you monitor your Service Request, you know at all times where it is in the process, or to be more specific, you know at all times what action the Support Engineer has taken on your request and what the next step is. When you think about it, it is rather simple... Oracle Support is working the issue, Oracle Development is working the issue, or you are. When you check on the status, you may find that the Support Engineer has a question for you or the engineer is waiting for more information to resolve the issue. If you monitor the Service Request, and respond quickly, the process keeps moving, and you’ll get your answer more quickly. Monitoring a Service Request is easy. All you need to do is check the status codes that the Support Engineer or the system assigns to your Service Request. These status codes are not static. You will see that during the life of your Service request, it will go through a variety of status codes. The best advice I can offer you when you monitor your Service Request is to watch the codes. If the status is not changing, or if you are not getting responses back within the agreed timeframes, you should review the action plan the Support Engineer has outlined or talk about a new action plan. Here are the most common status codes: Work in Progress indicates that your Support Engineer is researching and working the issue. Development Working means that you have a code related issue and Oracle Support has submitted a bug to Development. Please pay a particular attention to the following statuses; they indicate that the Support Engineer is waiting for a response from you: Customer Working usually means that your Support Engineer needs you to collect additional information, needs you to try something or to apply a patch, or has more questions for you. Solution Offered indicates that the Support Engineer has identified the problem and has provided you with a solution. Auto-Close or Close Initiated are statuses you don’t want to see. Monitoring your Service Request helps prevent your issues from reaching these statuses. They usually indicate that the Support Engineer did not receive the requested information or action from you. This is important. If you fail to respond, the Support Engineer will attempt to contact you three times over a two-week period. If these attempts are unsuccessful, he or she will initiate the Auto-Close process. At the end of this additional two-week period, if you have not updated the Service Request, your Service Request is considered abandoned and the Support Engineer will assign a Customer Abandoned status. A Support Engineer doesn’t like to see this status, since he or she has been working to solve your issue, but we know our customers dislike it even more, since it means their issue is not moving forward. You can avoid delays in resolving your issue by monitoring your Service Request and acting quickly when you see the status change. Respond to the request from the engineer to answer questions, collect information, or to try the offered solution. Then the Support Engineer can continue working the issue and the Service Request keeps moving forward towards resolution. Keep in mind that if you take an extended period of time to respond to a request or to provide the information requested, the Support Engineer cannot take the next step. You may inadvertently send an implicit message about the problem’s urgency that may not match the Service Request priority, and your need for an answer. Help us help you. We want to get you the answer as quickly as possible so you can stay focused on your company’s objectives. Now, back to our initial question. To monitor Service Requests or not to monitor Service Requests? I think the answer is clear: yes, monitor your Service Request to resolve the issue as quickly as possible.

  Read the article

• MOSC Bits - Personalized Profile

  - by Irina Donaldson - Moderator -Oracle

  It is a good idea to have a unique profile in MOSC. Your activities there are better recognized and might even become a well known brand! This leads to recognition and trust. My Oracle Support Communities (MOSC)  is a well established platform where experiences are shared. Reputation and trust are the basis for the quality of all communication there. A personalized  profile can help to build up a good reputation. Besides the experience counter, a good name, details about your location and business experience are valuable details. Although a little bit hidden, the profile's avatar can be customized, too. The profile's avatar is an eye catcher and can act as an unique visual representation for  you.  How to add / modify MOSC profile avatar (picture, icon)  ?    Don't look in Edit Profile section. After login, click on  your profile's name on top right.   This lists all public information as part of the Bio section. Select the Activity tab. The Change Avatar link is on same level at far right. A list of predefined symbolic pictures is populated. Choose from the list of existing pictures or try Add Another to upload an image file from your local computer (JPG, PNG, GIF, or BMP only, maximum file size of 2.0 MB). Note: New added images can be used only after running through a review process. Usually after one business day they can be selected for your personal avatar.

  Read the article

• Recycle remote IIS app pool from the command line?

  - by Ken

  Is it possible to recycle an IIS7 app pool from the command line, on a different machine? I've found APPCMD (appcmd recycle apppool my-app-pool), but it only operates on the host it's run on, AFAICT. I heard a rumor there might be a way to do it with Powershell, but I know nothing about that, and I'm apparently not very good at googling for it. I'm using Vista / Server 2008, if that matters. EDIT: I found something called WinRM that somebody claims is able to run APPCMD itself, but I'm not sure exactly how, yet.

  Read the article

• Why do I have to manually 'Restart Management Network' on vSphere 5 host after reboot to get networking available?

  - by growse

  I've got a couple of vSphere 5.0 hosts in a small lab environment here and I've noticed a strange behaviour. When on of the hosts gets rebooted, it is unresponsive to the network until I log into the ESX console, Press F2 to customize and select Restart management network. Once this is done, the networking works perfectly as expected. Each host has two NICs which are trunked together using Etherchannel to a Cisco 3750. The link is also a .1q VLAN trunk and the management network is configured on VLAN121 with the VM traffic configured on VLAN118. Why would the host be completely dead to the world until I physically kick it? Edit Sample switch config for trunk: interface Port-channel2 description Blade 1 EtherChannel Trunk switchport trunk encapsulation dot1q switchport mode trunk end ! ! interface GigabitEthernet4/0/1 description Bladecenter1 CPM 1A switchport trunk encapsulation dot1q switchport mode trunk speed 1000 duplex full channel-group 2 mode on end Vswitch teaming settings: Management port group settings:

  Read the article

• What's the fastest and automatic way to transfer 2GB of data between 2 PCs every night?

  - by phan

  While it's fast (less than 2 minutes) I hate having to copy files from PC #1 onto a USB stick, and then manually popping it in PC #2 to copy the files to PC #2. Dropbox is too slow in uploading and then downloading 2GBs (synching), it could take hours. Copying 2GBs over the network is also slow because we're dealing with 10,000 little files that totals 2GBs, and not just one, giant 2gb file. Not sure why, but dealing with 10,000 little files makes the copy process much longer. Is there any other method that I'm missing? Any ideas? I'm using Win7 on both PCs. Edit: These files change every single night.

  Read the article

• What follows after lexical analysis?

  - by madflame991

  I'm working on a toy compiler (for some simple language like PL/0) and I have my lexer up and running. At this point I should start working on building the parse tree, but before I start I was wondering: How much information can one gather from just the string of tokens? Here's what I gathered so far: One can already do syntax highlighting having only the list of tokens. Numbers and operators get coloured accordingly and keywords also. Autoformatting (indenting) should also be possible. How? Specify for each token type how many white spaces or new line characters should follow it. Also when you print tokens modify an alignment variable (when the code printer reads "{" increment the alignment variable by 1, and decrement by 1 for "}". Whenever it starts printing on a new line the code printer will align according to this alignment variable) In languages without nested subroutines one can get a complete list of subroutines and their signature. How? Just read what follows after the "procedure" or "function" keyword until you hit the first ")" (this should work fine in a Pascal language with no nested subroutines) In languages like Pascal you can even determine local variables and their types, as they are declared in a special place (ok, you can't handle initialization as well, but you can parse sequences like: "var a, b, c: integer") Detection of recursive functions may also be possible, or even a graph representation of which subroutine calls who. If one can identify the body of a function then one can also search if there are any mentions of other function's names. Gathering statistics about the code, like number of lines, instructions, subroutines EDIT: I clarified why I think some processes are possible. As I read comments and responses I realise that the answer depends very much on the language that I'm parsing.

  Read the article

• Set default open-with app to a Python program on a Mac

  - by Vincent

  I use the open source application UliPad to edit restructured text files (rst). It is a Python application that I launch via Terminal like so: python32 UliPad.py I have python32 as an alias to the 32bit install of Python on my machine. I have several versions installed. First I would like a way to launch UliPad like other OS X apps. Not really sure how to do this. Secondly, I would like to set all .rst files to be opened with UliPad.py. Is there a way to do this? I know how to choose the default app in Finder but not sure how to choose UliPad as that app.

  Read the article

• replacing 3 Cisco Catalyst 4500

  - by hoberion

  Our network supplier recommends replacing our 3 cisco catalyst 4500's because they are EOL and dont speak OSPF (which we really want) Its not my area of expertise so I cant say for sure if we really need to replace these units but for my company the estimated costs of 250K euro is a huge problem. Is there any way to cut down on costs (without moving from cisco devices), I heard the 4500´s can speak ospf but would need an upgrade of sorts? edit: version: IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version 12.2(20)EW, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) supervisor: WS-X4013+ Cisco Catalyst 4500 Series Supervisor Engine II-Plus density: WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45)

  Read the article

< Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >