Search Results

Search found 16032 results on 642 pages for 'everyday problems'.

Page 460/642 | < Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >

• Delete ARP cache on Mac OS when moving from one Wifi network to the other

  - by Puneet

  I am facing wireless connectivity problems when I move from one Wifi network to the other. Here is how it happens: I am at my friends place. I connect to his Wifi. His Wifi router ip address is 192.168.0.1. Everything is fine I close my laptop, come back to my house, open my laptop and I connect to the Wifi Network at my place. Different ESSID, but the Wifi router address is the same 192.168.0.1. At this point I cant get to anything on the internet. To debug I try to see if I can ping the router (192.168.0.1), I cant. I get a no route to host. Meanwhile airport tells me Im connected to Wifi. I see the arp cache and I see a permanent entry for 192.168.0.1 ? (192.168.0.1) at 5c:d9:98:65:73:6c on en1 permanent [ethernet] This permanent bit looks problematic. I go ahead and delete the arp cache entry and all is fine with the world until I go back to my friends place where the same situation plays out. Now my question is, why the hell is this happening? If there is no way around it, can I run a script on Wifi connect/disconnect to clear out the arp cache? Im using Mac OS X $uname -a Darwin 10.8.0 Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386 i386

  Read the article

• How to access Windows Server 2008 R2 file shares from a different subnet

  - by Lloyd Cotten

  We have a couple of severs that used to be Windows Server 2003 that we recently upgraded to Windows Server 2008 R2. A couple of details to set the situation up: We wiped the OS and re-installed. These servers are on one subnet (172.16.x.x) and we are trying to access some file shares on them from another subnet (10.34.x.x). Firewall is disabled on these servers. Trying to access with UNC "\172.16.x.x\sharename" and net use \172.16.x.x However, we're having problems doing this. We are getting "The network path was not found". Here's some of the things we've tried so far and the result: Tried accessing the share from other (non-2008) servers on the same subnet... Success! Ping servers from different subnet... Success! Telnet connection into port 139 from different subnet... Success! Took a scan through Local Security Policies to see if something obvious needed to be enabled / disabled / configured... Fail I'm not sure where to look next. I know that the router between the two subnets is locked down pretty good, but this did work for our 2003 servers. Has anything changed in the way of ports used for UNC / file share access in 2008? Maybe I'm missing some security policy setting? Hoping somebody can take pity on a poor programming guy that can't figure out something really simple. :-) Thanks!

  Read the article

• Can't connect to research.microsoft.com on home Qwest DSL connection

  - by rakingleaves

  I have a puzzling issue regarding accessing research.microsoft.com from my home Qwest DSL connection. By default, I frequently get timeouts when accessing research.microsoft.com from Firefox, Safari, or Chrome on my Mac. I also cannot access the site from Internet Explorer in a Windows VM. However, I am able to access the site through proxify.com, so I know the site is not down. Furthermore, I haven't noticed problems accessing other sites (in particular, www.microsoft.com works fine). Also, I can access research.microsoft.com when I'm connected to networks other than my home Qwest DSL connection. Together, the above make me suspect a problem with either my router (Airport Express) or, more likely, my ISP. Anyone have any thoughts on how I can narrow down the problem further? I could call my ISP and tell them the above, but my feeling is that probably won't get me very far. I can get by browsing research.microsoft.com through a proxy, but it would be nice to figure out what's going on here and fix the problem. Oh, the only relevant discussion I found via Google was here: http://forums.whirlpool.net.au/forum-replies-archive.cfm/1311734.html Update: Thanks to those who have tried to help! I found one other thing while Googling that may be vaguely relevant: http://thedaneshproject.com/posts/supportmicrosoftcom-not-working-behind-squid/ Disabling the Accept-Encoding headers in Firefox actually didn't make a difference for me. I just thought the above might spark some other ideas about how mishandling of HTTP headers somewhere might be causing this problem. Thanks again! Another update: In case anyone is still thinking about this; I've found that I can't surf research.microsoft.com using the links text-based browser, but I can reliably download individual files with wget. Maybe that helps?

  Read the article

• Using UDF on a USB flash drive

  - by CesarB

  After failing to copy a file bigger than 4G to my 8G USB flash drive, I formatted it as ext3. While this is working fine for me so far, it will cause problems if I want to use it to copy files to someone which does not use Linux. I am thinking of formatting it as UDF instead, which I hope would allow it to be read (and possibly even written) on the three most popular operating systems (Windows, MacOS, and Linux), without having to install any extra drivers. However, from what I found on the web already, there seem to be several small gotchas related to which parameters are used to create the filesystem, which can reduce the compability (but most of the pages I found are about optical media, not USB flash drives). I would like to know: Which utility should I use to create the filesystem? (So far I have found mkudffs and genisoimage, and mkudffs seems the best option.) Which parameters should I use with the chosen utility for maximum compability? How compatible with the most common versions of these three operating systems UDF actually is? Is using UDF actually the best idea? Is there another filesystem which would have better compatibility, with no problematic restrictions like the FAT32 4G file size limit, and without having to install special drivers in every single computer which touches it?

  Read the article

• Getting old bluetooth headset out of standby on Windows 7

  - by luagh45

  I think this is the problem, and if not, I'm open to suggestions. I have an old Jabra BT200 that I used to use on my phone. When a phone call was coming in it would beep using its own noises (meaning the phone never rang inside the headset) and then I could push the 'answer/hang up' button and sound and mic would start working. I have now paired it with Windows 7, and it looks good. Under the playback menu I have 'Bluetooth Hands free Audio / Jabra BT200 (Mono Audio) / Ready', and under the recording menu I have 'Bluetooth Audio Input Device / Jabra BT200 (Mono Audio) / Ready'. However when I try to test the speakers Windows sends a sound, but I never hear it, and when I talk in the mic, Windows never hears me. If I right click either the Bluetooth mic or speakers there's an option to 'Connect', but it's grayed out and I cannot click it. As the final piece of knowledge I have, my headset blinks once every 3 seconds when it's in standby and I can't get that to change. If everything was working it should blink once every second at which point I think all of my problems would be fixed. Hence my issue: I can't seem to get my headset out of standby. On my headset I've tried sending it test noises and then pressing the 'Answer' button, but still nothing. The headset beeps when I press it, so it works, it just doesn't ever come out of standby. Is there maybe some way to trick my headset into thinking it's getting a phone call from my computer?

  Read the article

• Cannot find wireless driver for HP laptop

  - by rodey

  I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

  Read the article

• Trouble cloning a Macbook Pro hard drive

  - by Mirko Froehlich

  I am trying to upgrade the 250GB hard drive in my MacBook Pro (early 2008 model) to a 750GB drive. I have connected the new drive via an external USB enclosure. The drive is recognized fine, I can format it, etc. However, every time I try to clone the drive, I am getting Input/Output errors. Before the clone operation, I have verified both the internal and the external drive using Disk Utility, and they both check out fine. After the clone operation, the external drive shows multiple "Invalid node structure" errors: I have tried two approaches for cloning the drive: Using Disk Utility, by starting from the OSX install DVD Using Carbon Copy Cloner The outcome is the same in both cases. The Carbon Copy Cloner logs show a handful of the following types of errors: rsync: mkstemp "<... an external filename ...>" failed: Input/output error (5) rsync: stat "<... an external filename ...>" failed: Input/output error (5) The actual files affected seem to be different across different runs of the application. Before the last run, I used Disk Utility to (once more) reformat the external drive and explicitly overwrite it with zeros, but this made no difference. I also tried running a surface scan in Tech Tool Pro overnight. It got about 2/3 of the way through before I had to disconnect the drive (had to take my MacBook Pro to work), but so far it didn't report any bad blocks. Assuming it scans the drive in the same order in which blocks would be allocated during actual use, it seems like if bad blocks were to blame for the clone failures, they should have been found already (given that the source drive is only 250GB). As a last attempt, I may try SuperDuper as well, although my understanding is that it uses the same underlying rsync approach as Carbon Copy Cloner, so it's unlikely to perform any better. Are there any other things I should try before I send the drive in for a replacement? Could these problems be caused by my internal drive, even though it works fine and checks out fine in Disk Utility?

  Read the article

• Setting up WHM nameservers

  - by Miskone

  I am new to server administration and I've just got a dedicated root server from Hetzner. First I set up in Hetzner's robot DNS entries Registered nameservers: ns1.raybear.com 88.198.32.57 ns2.raybear.com 88.198.32.57 Under DNS entires I have buzz-buzz.me pointing to 88.198.32.57 // My server IP address and on my WHM I have DNS zone for buzz-buzz.me ; cPanel first:11.42.1.17 (update_time):1402062640 Cpanel::ZoneFile::VERSION:1.3 hostname:hosting.raybear.com latest:11.42.1.17 ; Zone file for buzz-buzz.me $TTL 14400 buzz-buzz.me. 86400 IN SOA ns1.raybear.com. miskone.gmail.com. ( 2014060605 ;Serial Number 86400 ;refresh 7200 ;retry 3600000 ;expire 86400 ) buzz-buzz.me. 86400 IN NS ns1.raybear.com. buzz-buzz.me. 86400 IN NS ns2.raybear.com. buzz-buzz.me. 14400 IN A 88.198.32.57 localhost 14400 IN A 127.0.0.1 buzz-buzz.me. 14400 IN MX 0 buzz-buzz.me. mail 14400 IN CNAME buzz-buzz.me. www 14400 IN CNAME buzz-buzz.me. ftp 14400 IN CNAME buzz-buzz.me. agent 14400 IN A 88.198.32.57 src 14400 IN A 88.198.32.57 platform 14400 IN A 88.198.32.57 But still I have some problems accesing buzz-buzz.me, agent.buzz-buzz.me and platform.buzz-buzz.me Also I have problem getting mails on Google account, I can send but not receive emails. How to solve this. As I said I am completly new here and I need urgent help.:(

  Read the article

• How to get automatic upgrades to work on Ubuntu Server?

  - by J. Pablo Fernández

  I followed the documentation for enabling automatic upgrades in Ubuntu servers, but it's not really updating anything at all. My /etc/apt/apt.conf.d/50unattended-upgrades looks almost like the default. // Automatically upgrade packages from these (origin, archive) pairs Unattended-Upgrade::Allowed-Origins { "Ubuntu karmic-security"; "Ubuntu karmic-updates"; }; // List of packages to not update Unattended-Upgrade::Package-Blacklist { // "vim"; // "libc6"; // "libc6-dev"; // "libc6-i686"; }; // Send email to this address for problems or packages upgrades // If empty or unset then no email is sent, make sure that you // have a working mail setup on your system. The package 'mailx' // must be installed or anything that provides /usr/bin/mail. Unattended-Upgrade::Mail "[email protected]"; // Automatically reboot *WITHOUT CONFIRMATION* if a // the file /var/run/reboot-required is found after the upgrade //Unattended-Upgrade::Automatic-Reboot "false"; The directory /var/log/unattended-upgrades/ is empty. Running /etc/init.d/unattended-upgrades start is not very nice: root@mozart:~# /etc/init.d/unattended-upgrades start Checking for running unattended-upgrades: root@mozart:~# Something seems to be broken, but I'm not sure why. I have pending updates and they are not being applied: root@mozart:~# aptitude safe-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following packages will be upgraded: linux-libc-dev 1 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/743kB of archives. After unpacking 4096B will be used. Do you want to continue? [Y/n/?] In all the servers I have, unattended upgrades seems to have been disabled: root@mozart:~# apt-config shell UnattendedUpgradeInterval APT::Periodic::Unattended-Upgrade root@mozart:~# Any ideas what am I missing?

  Read the article

• NGINX server_name issues

  - by Unai

  I have the following simple server block on NGINX: server { listen 80; listen 8090; server_name domain.com; autoindex on; root /home/docroot; location ~ \.php$ { include /usr/local/nginx/conf/fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/docroot$fastcgi_script_name; fastcgi_pass 127.0.0.1:9000; } } After I include the relevant settings on my hosts file I get the following (unexpected) behavior: http: //domain.com/ and http: //domain.com:8090/ work fine; http: //domain.com:8090/future-cell-phone-technology-01-150x150.jpg works; http: //domain.com/future-cell-phone-technology-01-150x150.jpg - ERROR! "The connection was reset" (note.- added a space after http: to avoid link protection but this is not really promoting anything) I've been troubleshooting (3) for a couple hours and I'm unable to identify the culprit. I'm running NGINX 1.0.10 (latest stable) on Debian 6.0.2 32 bits. This NGINX instance runs another 40 or 50 sites with no problems.

  Read the article

• Are there cloud network drives that let users lock files or mark them as "in use"?

  - by Brandon Craig Rhodes

  Having spent several hours reading about the features and limitations of services like DropBox and Jungle Disk and the hundreds of competitors they seem to have (as though everyone with an AWS account these days goes ahead and writes a file sharing application just for fun), I have yet to find one that would let a team of people at a small business collaborate without stepping all over each other's toes. At a small business there are often many small documents per project — estimates, contracts, project plans, budgets — and team members frequently have to open and edit them, with all sorts of problems happening if two people edit a file at once. Even if a sharing service is smart enough to keep both versions of the file created, most small-business software (like word processors, spreadsheets, estimating software, or billing systems) has no way to compare — much less to merge! — the changes in two rival versions of a file that two people edited at the same time without each other's knowledge. So, my question: are their cloud-based file sharing solutions that not only provide a virtual network drive that people can access, but that also let users lock files — even if it's not a real lock but just a flag or indicator — that could possibly prevent remote workers from both editing the same file at once? Having one person wait for another person to finish editing is a very, very small inconvenience compared to the hour or more than it can take to compare two estimates by hand until you find and resolve the rival changes. Given this fact, I am surprised that almost none of the popular file sharing solutions seem to recognize this problem and provide some solution! Does anyone know of a service that does?

  Read the article

• Why does the screen resolution of 1440x900 suddenly disappear from Intel GMA Control Panel?

  - by GeneQ

  I'm using a Vostro 1200 laptop with the Mobile Intel(R) 965 Express Chipset powering its graphics and running Vista 32-bit SP2. I've been using the Vostro with a Dell SE198WFP LCD Monitor as the external display since day one for about two years without any problems. Recently, I plugged the Vostro into a couple of other monitors. The problem is, now the native resolution for my main monitor's (the SE198WFP) resolution of 1440x900 @ 60 Hz is no longer available. (See below) I've tried everything from uninstalling and reinstalling the Intel drivers as well as the monitor drivers to no avail. I've goggled this problem and it appears that this has happened to other people but all the answers involve people giving up in frustration or reinstalling; both terrible outcomes. Has anybody ever figured why this happens and have a good solution? UPDATE: This dude has a complicated solution, which I haven't tried yet. His explanations for the problem was After an exausting search for an answer to the matter of why my brand new 19? widescreen monitor’s native resolution (1440×900) was unavailible (sic) in the display properties, I finally stumbled upon an article a person posted on Intel’s forums that basically explained what shannanigans Intel had been up to with their GMA 950 line of onboard graphic solutions. Not very comforting.

  Read the article

• Motherboard running rather hot while gaming

  - by I take Drukqs

  Case: Antec 1200 Mobo: Gigabyte GA-X58A-UD3R CPU: Intel i7 950 (stock cooler) GPU: EVGA GeForce 570 GTX RAM: 2x 2 GB (4 GB total) DDR3 dual-channel Corsair OS: Windows 7 Home Premium 64-bit This is my first build and it's brand new. I had no problems putting it all together in a few hours one evening and I consider myself to be pretty good with computers. Not to brag or anything like that! Just saying I've been fiddling with them since I was in diapers and I have a good amount of experience under my belt, just not with certain things yet. Recently while playing many of the latest games maxed out without a hitch my motherboard has been running hot and like anyone who's ever built a computer it scares the life out of me. I checked HWMonitor and saw that my motherboard sometimes reached temperatures of around 52 - 78c (the number 78 obviously being what's scaring me). I was wondering if such a temperature is normal and if not what the problem could be. Air flow in my case is phenomenal and besides having to ship back a faulty GPU and reseat my CPU my first build has been a very large success which I am enjoying tremendously. There is literally almost no dust in my case due to it being very new as previously mentioned and my RAM sticks are in the correct slots for dual-channel mode. My cable management is pretty great in my opinion with only cables from my PSU lingering in the bottom of the case. At any given opportunity I ran my cables behind my mobo. Air flow should definitely not be a problem because my CPU only goes up to about 60c and my GPU only goes up to about 80c. Thank you very much in advance.

  Read the article

• Is current SATA 6 gb/s equipment simply unreliable?

  - by korkman

  I have a 45-disk array of Seagate Barracuda 3 TB ST3000DM001 (yes these are desktop drives I'm aware of that) in a Supermicro sc847 JBOD, connected via LSI 9285. I have found a solution for the problem description below by reducing speed via MegaCli -PhySetLinkSpeed -phy0 2 -a0; for i in $(seq 48); do MegaCli -PhySetLinkSpeed -phy${i} 2 -a0; done and rebooting. The question remains: Is this typical for current 6 gb/s equipment? Is this the sad state of SATA storage? Or is some of my equipment (the sff-8088 cables come to mind) bad? The Problem was: Synchronizing HW RAID-6, disks kept offlining. Fetching SMART values reveiled that those which offlined did not increase powered-on hours anymore. That is, their firmware (CC4C) seems to crash. Digging into the matter by switching to Software RAID-6, with the disks passed-through, I got tons of kernel messages scattered across all disks, with 6 gb/s: sd 0:0:9:0: [sdb] Sense Key : No Sense [current] Info fld=0x0 sd 0:0:9:0: [sdb] Add. Sense: No additional sense information And finally, when a disk offlines: megasas: [ 5]waiting for 160 commands to complete ... megasas: [35]waiting for 159 commands to complete ... megasas: [155]waiting for 156 commands to complete ... megaraid_sas: pending commands remain after waiting, will reset adapter. Ugly controller reset here, then minutes later: megaraid_sas: Reset successful. sd 0:0:28:0: Device offlined - not ready after error recovery ... sd 0:0:28:0: [sdu] Unhandled error code sd 0:0:28:0: [sdu] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK sd 0:0:28:0: [sdu] CDB: Read(10): 28 00 23 21 2f 40 00 00 70 00 sd 0:0:28:0: [sdu] killing request Reduced speed to 3 gb/s like written above, all problems vanished.

  Read the article

• How (in)secure are cell phones in reality?

  - by Aron Rotteveel

  I was recently re-reading an old Wired article about the Kaminsky DNS Vulnerability and the story behind it. In this article there was a quote that came across a little bit exaggerated to me: "The first thing I want to say to you," Vixie told Kaminsky, trying to contain the flood of feeling, "is never, ever repeat what you just told me over a cell phone." Vixie knew how easy it was to eavesdrop on a cell signal, and he had heard enough to know that he was facing a problem of global significance. If the information were intercepted by the wrong people, the wired world could be held ransom. Hackers could wreak havoc. Billions of dollars were at stake, and Vixie wasn't going to take any risks. When reading this I could not help but feel like it was a bit blown-up and theatrical. Now, I know absolutely nothing about cell phones and the security problems involved, but to my understanding, cell phone security has quite improved over the past few years. So my question is: how insecure are cell phones in reality? Are there any good articles that dig a bit deeper into this matter?

  Read the article

• Why is my biometric logon method no longer default and how to fix it? Win 7-based lenovo laptop

  - by StormRyder

  My laptop has been having some random problems with hibernating properly. That is a whole another topic that I still haven't resolved, but this is a different issue. The issues are connected, I guess, because one time after my computer experienced a failed hibernate, my login screen changed: since then my login screen always appears as the standard one with a prompt to type in a password. I can still use the finger scanner by clicking "other credentials" button. But that's annoying having to do that every time; previously the prompt to use finger scanner was the default one, whereas the typing password access was the alternate. How do I bring this arrangement back? In other words, how to switch the default from the type password prompt to the finger scan prompt? From online searches, I have only found discussions of turning the biometric access on or off... but clearly it is turned on and working, since I can use it. It's just not the default for some reason...

  Read the article

• Configuring CakePHP on Hostgator

  - by yaeger

  I have absolutely no idea what I am doing wrong here. I have followed just about every guide there is with installing cakephp on shared hosting and I am still having problems. I have also started over each time when following a guide. Maybe someone can help me out here as I am out of options. Here is my current setup: / app webroot vendors lib cake public_html .htaccess index.php plugins I have configured the index.php file in the public_html to point to the correct files. I have also done this in the index.php file located in webroot folder. I am getting an Internal 500 server error and it says to check my logs for what the error specifically is. However there are no logs being generated. I removed the .htaccess file from the public_html folder and I get the following errors: Warning: require(/app/webroot/index.php) [function.require]: failed to open stream: No such file or directory in /home/user/public_html/index.php on line 40 Fatal error: require() [function.require]: Failed opening required '/app/webroot/index.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/user/public_html/index.php on line 40 line 40 is require APP_DIR . DS . WEBROOT_DIR . DS . 'index.php'; DS = "/" WEBROOT_DIR = "app" Anyone have any suggestions? I am at lost at what I am doing wrong.

  Read the article

• File Sync Solution for Batch Processing (ETL)

  - by KenFar

  I'm looking for a slightly different kind of sync utility - not one designed to keep two directories identical, but rather one intended to keep files flowing from one host to another. The context is a data warehouse that currently has a custom-developed solution that moves 10,000 files a day, some of which are 1+ gbytes gzipped files, between linux servers via ssh. Files are produced by the extract process, then moved to the transform server where a transform daemon is waiting to pick them up. The same process happens between transform & load. Once the files are moved they are typically archived on the source for a week, and the downstream process likewise moves them to temp then archive as it consumes them. So, my requirements & desires: It is never used to refresh updated files - only used to deliver new files. Because it's delivering files to downstream processes - it needs to rename the file once done so that a partial file doesn't get picked up. In order to simplify recovery, it should keep a copy of the source files - but rename them or move them to another directory. If the transfer fails (network down, file system full, permissions, file locked, etc), then it should retry periodically - and never fail in a non-recoverable way, or a way that sends the file twice or never sends the file. Should be able to copy files to 2+ destinations. Should have a consolidated log so that it's easy to find problems Should have an optional checksum feature Any recommendations? Can Unison do this well?

  Read the article

• ProFTPD / PAM issues with new centos/virtualmin install

  - by iamthewit

  Hi All, I just installed CentOS 5.4 on a rackspace cloud server and installed virtualmin which all seemed to go fine. The only problem I have is that I can not access the virtual servers directories via FTP. I get the following from filezilla: Status: Connecting to 1.1.1.1:21... Status: Connection established, waiting for welcome message... Response: 220 FTP Server ready. Command: USER username Response: 331 Password required for username. Command: PASS ******* Response: 230 User username logged in. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (1,1,1,1,216,214) Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing and I get this from my /var/secure/log file Sep 22 19:40:42 stickeeserver proftpd: pam_unix(proftpd:session): session opened for user username by (uid=0) Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - USER nastypasty: Login successful. Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - Preparing to chroot to directory '/home/username' Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - mod_delay/0.5: delaying for 728 usecs Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - error setting IPV6_V6ONLY: Protocol not available Any help would be greatly appreciated, I'm not totally new to Linux but it's not my strongest subject. I do like to know exactly why problems occur though and how exactly to fix them so the more detail the better! cheers

  Read the article

• Moving a lotus database causes incoming mail failure

  - by Logman

  Hey all, I moved a couple lotus note databases to another hd (ran out of space) by using a directory link/pointer on the domino server. USed a text file with the .DIR ext with the desired new path etc... well that works fine. I open up a lotus notes client, use the id and then OPEN the database. The directory link works fine, the new location of the db is opened with no problems. We found out that we couldnt FORWARD any mail: We did the following to make it work: Goto menu FILE|MOBILE|EDIT CURRENT LOCATION Goto tab MAIL and enter the correct path for "Mail File:" example: it should read "mail\morespace\flabor" and not "mail\flabor" "morespace" = directory link/pointer we can forward and reply to emails fine after that fix. The problem is that the user has no incoming email. Domino is still trying to send the incoming mail of that user to its old db location "mail\flabor" instead of "mail\morespace\flabor". Delivery error saying user does not exist. Is this a cache problem? We have reset the server ("Q" at the prompt), though we have not completely shut it down though. Thanks Frank

  Read the article

• Wireless disconnects at random after upgrade to Ubuntu 10.4

  - by Daniel Elessedil Kjeserud

  After upgrading my home server from Ubuntu 8.10 to 10.4 my wireless seemingly drops out, even though my IRC client keeps it's connection to the servers, so it looks like the machine just stops taking wireless requests. A ping will give a me this Request timeout for icmp_seq 27 ping: sendto: Host is down After a while the machine just starts responding again, without any interaction from me. When the machine comes back, this is what dmesg gives me [ 18.296288] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.296350] wlan0: deauthenticating from 00:1b:63:22:a4:5f by local choice (reason=3) [ 18.296440] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.298697] wlan0: direct probe responded [ 18.298706] wlan0: authenticate with AP 00:1b:63:22:a4:5f (try 1) [ 18.306836] wlan0: authenticated [ 18.306886] wlan0: associate with AP 00:1b:63:22:a4:5f (try 1) [ 18.309396] wlan0: RX AssocResp from 00:1b:63:22:a4:5f (capab=0x411 status=0 aid=2) [ 18.309402] wlan0: associated [ 18.310187] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.447742] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 18.447748] apm: overridden by ACPI. [ 19.163282] padlock: VIA PadLock not detected. [ 28.352022] wlan0: no IPv6 routers present kjes@brin:~$ lspci 02:07.0 Network controller: RaLink RT2561/RT61 rev B 802.11g It's on a wireless network with WPA2, the machine worked without any problems on the same wireless network since Ubuntu 8.10 was the most resent version, and there have been no changes to my network recently. Even though the server drops out, everything else on the network keeps working like normal.

  Read the article

• Jenkins CI - Cannot allocate memory

  - by Programmieraffe

  I tested jenkins-ci successfully on a ubuntu 10.4 (with vmware fusion) on my local computer. Now I want to install and use it on my virtual server at hosteurope. The basic installation was no problem, but now I have problems with my build project. After pulling an mercurial update from a repository, ant is invoked and throws the following error in my build project: "Buildfile: /var/lib/jenkins/workspace/concrete5-seed-clean/build.xml [property] java.io.IOException: Cannot run program "/usr/bin/env": java.io.IOException: error=12, Cannot allocate memory" There is a known problem with heap size at virtual servers at hosteurope (http://faq.hosteurope.de/index.php?cpid=13918), so I tried to set the heap size manually: # for ant export ANT_OPTS="-Xms512m -Xmx512m" # jenkins # edited /etc/default/jenkins, added line JAVA_ARGS="-Xms512m -Xmx512m" # restarted jenkins via /etc/init.d/jenkins restart After setting this for ant, the command "ant -diagnostics" runs through and does not cause an error, but the error still occurs when I try to build the project. Server-Details: - http://www.hosteurope.de/produkt/Virtual-Server-Linux-L Ubuntu 10.4 LTS RAM: 1GB / Dynamic 2GB My questions: - Is 1GB enough for Jenkins or do I have to upgrade the server? - Is this error caused by ant or jenkins? Update: I got it running with ant options -Xmx128m -Xms128m, but sometimes the error occurs again. (this freaks me out, cause i can not reproduce it by now :/ ) Help much appreciated! Cheers, Matthias

  Read the article

• Mac updated just now, postgres now broken

  - by Dave

  I run postgres 9.1 / ruby 1.9.2 / rails 3.1.0 on a maxbook air for local dev. It's all been running smoothly for months, (though this is the first time I've done development on a mac.) It's a macbook air from last year, and today I got the mac osx software update message as I have a few times before, and my system downloaded approx 450mb of updates and restarted. It now says it's on OSX 10.7.3. Point is, postgres has stopped working, when I start my thin server (mirror heroku cedar) as normal, and then browse to my rails app I get: PG::Error could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"? What happened? After browsing around a few questions I'm still confused, but here's some extra info: Running psql from command line gives same error I can run pgadmin 3 and connect via it and run SQL no problems Running which psql shows the version as /usr/bin/psql I created a PostgreSQL user back when I got the mac (it's always been on lion) I've no idea why, almost certainly I was following a tutorial which I neglected to store in my notes. Point is I am aware there is a _postgres user as well. I know it's rubbish, but apart from a note on passwords, I don't have any extra info on how I configured postgres - though the obvious implication is that I did not use the _postgres user. Anyone have suggestions or information on what might have changed / what I can try to debug and fix? Thanks. Edit: Playing around based on this question and answer: http://stackoverflow.com/questions/7975414/check-status-of-postgresql-server-mac-os-x, see this string of commands: $ sudo su postgreSQL bash-3.2$ /Library/PostgreSQL/9.1/bin/pg_ctl start -D /Library/PostgreSQL/9.1/data pg_ctl: another server might be running; trying to start server anyway server starting bash-3.2$ 2012-04-08 19:03:39 GMT FATAL: lock file "postmaster.pid" already exists 2012-04-08 19:03:39 GMT HINT: Is another postmaster (PID 68) running in data directory "/Library/PostgreSQL/9.1/data"? bash-3.2$ exit

  Read the article

• Why Ubuntu could treat hosts file so strange?

  - by z4y4ts

  I have almost fresh Ubuntu desktop box. OS was installed two weeks ago and updated from karmic repositories. Last week I had no problems with DNS. But this week something had changed. I'm not sure what and when, and not sure whether I changed any configs. So now I have some really weird situation. According to logs name resolving should work normally. /etc/hosts 127.0.0.1 localhost test 127.0.1.1 desktop /etc/host.conf order hosts,bind multi on /etc/resolv.conf # Generated by NetworkManager search search servers obtained via DHCP nameserver 192.168.0.3 /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis But if fact it is not. user@test ~ping test PING localhost (127.0.0.1) 56(84) bytes of data. [skip] Pinging is ok. user@test ~host test test.myviacube.com has address xx.xxx.161.201 But pure I suspect that NetworkManager might cause this misbehavior, but don't know where to start to check it. Any thoughts, suggestions?

  Read the article

• 403 with Apache and Symfony on Ubuntu 10.04

  - by Dominic Santos

  I'm trying to run symfony on my apache installation (I'm using xampp for the whole package) and it keeps giving me a 403 error every time I try to access my website. I've got vhosts set up with the following: <VirtualHost *:80> ServerName localhost DocumentRoot "/opt/lampp/htdocs" DirectoryIndex index.php <Directory "/opt/lampp/htdocs"> AllowOverride All Allow from All </Directory> </VirtualHost> <VirtualHost *:80> ServerName servername.localhost DocumentRoot /home/me/web/server/web DirectoryIndex index.php Alias /sf "/lib/vendor/symfony/data/bin/web/sf" <Directory "/home/me/web/server/web"> AllowOverride All Allow from All </Directory> </VirtualHost> <Directory "/lib/vendor/symfony/data/bin/web/sf"> Allow from All </Directory> I've also added "127.0.0.1 servername.localhost" in my hosts file. When I try to access "servername.localhost" it just gives me a 403 error. I've chmod'd 777 the symfony directory and my website directory in my home directory and used './symfony project:permissions' to let symfony check that permissions are set up correctly but still not result. If I move my website directory into "/opt/lampp/htdocs" then it will serve it from there but still has problems access the symfony stuff such as the debug toolbar. Any help would be appreciated.

  Read the article

< Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >