Search Results

Search found 34056 results on 1363 pages for 'mod access'.

Page 460/1363 | < Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >

  • External USB Fingerprint Reader for Pre-boot Authentication for Dell Laptop

    - by cop1152
    My company just purchased several Dell Latitude E6500 laptops with docking stations and external monitors. These laptops have a fingerprint scanner located next to the keyboard. DOCKED users who prefer to use the included fingerprint scanner for pre-boot authentication are forced to open their laptop in order to access the scanner. This is an inconvenience when the laptop is docked. We are looking for an external, usb fingerprint scanner, that will work with the current preboot authentication setup. I assume that this scanner would have to access the existing credentials for authentication....wherever they are stored. So we would require something that would work PRE-BOOT, use the existing credentials, and not interfere with usage when the machine was not docked, such as when the laptop is being used at home. Does anyone have experience with this scenario? Thanks.

    Read the article

  • installing lots of perl modules

    - by Colin Pickard
    Hi, I've been landed with the job of documenting how to install a very complicated application onto a clean server. Part of the application requires a lot of perl scripts, each of which seem to require lots of different perl modules. I don't know much about perl, and I only know one way to install the required modules. This means my documentation now looks this: Type each of these commands and accept all the defaults: sudo perl -MCPAN -e 'install JSON' sudo perl -MCPAN -e 'install Date::Simple' sudo perl -MCPAN -e 'install Log::Log4perl' sudo perl -MCPAN -e 'install Email::Simple' (.... continues for 2 more pages... ) Is there any way I can do all this one line like I can with aptitude i.e. Type the following command and go get a coffee: sudo aptitude install openssh-server libapache2-mod-perl2 build-essential ... Thank you (on behalf of the long suffering people who will be reading my document) EDIT: The best way to do this is to use the packaged versions. For the modules which were not packaged for Ubuntu 10.10 I ended up with a little perl script which I found here ) #!/usr/bin/perl -w use CPANPLUS; use strict; CPANPLUS::Backend->new( conf => { prereqs => 1 } )->install( modules => [ qw( Date::Simple File::Slurp LWP::Simple MIME::Base64 MIME::Parser MIME::QuotedPrint ) ] ); This means I can put a nice one liner in my document: sudo perl installmodules.pl

    Read the article

  • how to optimize virtual box shared folders

    - by Nrew
    This is really pissing me off. No matter how much memory I put into the guest os(windows xp). It still hangs for about 365 days before you can access the file you want to access from the shared folder. What do I do to make things faster? Because after it hangs and not respond for 365 days. It will do it again for another 250 days. Ive even set the shared folder to permanent. This is a fairly decent machine: 2.50ghz processor(x64 architecture, but I have only 2Gb of memory so my host os is just 32 bit windows 7) hdd has much space left: 156 Gb free of 250Gb

    Read the article

  • Mimic NTFS "Modify" Permissions on an ext3 acl enabled filesystem in linux?

    - by bobinabottle
    I am migrating our file share from Windows Server to Samba on Linux, and the only hurdle I have at the moment is the acl's. Currently we have a number of directories that use the "Modify" permission on NTFS, so users can write to a directory, but once the file is written it cannot be modified. On Linux, I had the idea that I would set an ACL for the directory to have read/write access, but have a default ACL associated with read only access. Is this possible? I'm not quite sure how to set a default ACL that differs from the parent directory. Thanks!

    Read the article

  • MySQL: "UPDATE command denied to user ''@'localhost'"

    - by Uncle Nerdicus
    For some reason when I installed MySQL on my machine (a Mac running OS X 10.9) the 'root' MySQL account got messed up and I don't have access to it, but I do have access to the standard MySQL account 'sean@localhost' which I use to log into phpMyAdmin. I am trying to reset the 'root' password by starting the mysqld daemon using the command mysqld --skip-grant-tables and then running the following lines in the mysql shell. mysql> UPDATE mysql.user SET Password=PASSWORD('MyNewPass') -> WHERE User='root'; mysql> FLUSH PRIVILEGES; Problem is when I try to run that MySQL string the daemon spits back a ERROR 1142 (42000): UPDATE command denied to user ''@'localhost' for table 'user' as if I didn't use the -u argument when I started the mysql shell, either though I did. Any help is muchly appreciated as I am lost at this point. :/

    Read the article

  • How to run a service as a user who can't delete or update or create a file

    - by neeraj
    Mongodb is a web based console to try out Mongodb. I have created something similar to try out nodejs. In nodejs I am accepting user input and then I am performing eval on that command. Given the power of nodejs , someone from web console can create a file, delete files on the system or could execute 'rm -rf '. I was thinking will it be okay if I run node as a user called node. This user node will not have any privilege to write anything, create anything or update anything. The only access this user will have is read access. Will that work or that is too much of risk. What is a good strategy to handle such a situation?

    Read the article

  • Sonicwall NAT Policy Loopback

    - by John
    I have an issue and am pretty perplexed over it. I have a sonicwall and its setup with NAT polices and reflexive nat for an internal web server. That is, only 2 policies, no loopback policy, and the internal clients can access the web server by public ip no problems. Now, on another connection, another sonicwall, i have the exact same setup for another web server, with exact same policies (obviously different IP's) and the internal clients can't access the internal website by its public IP without creating the loopback policy. Maybe on the first one I've overlooked it, but I don't see any loopback what so ever and its working fine. My question is, does anyone know why the first one works like this but the second one needs the loopback policy? Thanks

    Read the article

  • Shrew VPN Client gives default route- changing the policy stops me from accessing VPN network

    - by Lock
    I am using the shrew client to connect to what I believe is a Netscreen VPN. Now, when connected, the client adds the VPN as the default route. I do not want this- there is only 1 network behind the VPN that I need to access. I found that with the shrew client, you can change the "Policy" settings on the connection, and can add your own networks in that should tunnel over the VPN. I do this, and add my network in, but when I connect the VPN, I get nothing. Can't access the network. Any idea why this would be? I can see my network in the routing table, and its correctly pointing to the correct gateway. A traceroute shows all time-outs, so I can't be 100% sure that it is trying to tunnel over the VPN. Any idea how I can troubleshoot this?

    Read the article

  • Intgrating windows 2000 server in a windows 2008 domain [on hold]

    - by user199121
    I have a network enviroment where my windows 2000 server is just acting as fileserver for sharing, so all the users has an account there with username, password and a list of access rights. Now i want to keep this server cause i am running from there an application that 20 users access but also i want to add a new Windows 2008 R2 64 bit server as a domain controller. Is this possible ? 1-It is ok to make the new windows 2008 server a domain controller ? 2- I want all the users accounts to be the same in the domain controller so they can still use the same username and password to login into the domain as well into the windows 2000 server that is setup as a Workgroup. 3- Do i need to do something to the windows 2000 sever to still be functional in the environment so it can be accessed by the clients computers? note:My clients computers are windows 2000 pro, xp pro and windows 7 32/64 bit. Thanks in advance

    Read the article

  • How can I force Parallels' networking to obtain an IP through a wireless router?

    - by RLH
    Here is my setup. I have a Macbook, Thunderbolt display and an Ethernet connection plugged into the Thunderbolt display. During the day, most of my network use can (and should) operate across the ethernet associated with my display. However, I also need to be able to connect up to a wireless router. This hasn't been a problem on the Mac OS X side, but the program that I need to run on the router has to obtain an IP address from the wireless access point. Considering my current setup, how can I leave it so that I can access the internet in OS X, yet have my Window 7 instance running in Parallels, get it's assigned IP address from a wireless router that my Mac is also connected to? I've fiddled around with the Parallel's network settings for an hour, and I can't get Parallel's to see the router, even though my Mac is certainly connected to it.

    Read the article

  • Starting x11vnc remotely when X server is already running

    - by Madiyaan Damha
    I have a ubuntu linux machine that I have already logged into and X server is running (it is pass the login manager like gdm). I can access this machine through ssh. My goal is to start x11vnc on this machine and attach it to the X server that is already running. When I ssh into the machine and start x11vnc, it says: X11 was unable to open the X DISPLAY ":0", it cannot continue. How can I start x11vnc on the remote machine if I don't have physical access to it and Xserver has already started. The reason I want to do this is because the remote machine has several windows open that I want to work on. Thanks,

    Read the article

  • SMB super slow within LAN between MAC and PC

    - by asdcasdc
    I have a windows desktop which stores all my movies, songs and pictures. I have a mac laptop which I would like to access these files. I don't want to utilize the FTP or SCP protocol because I don't want them to be downloaded to my mac. I want to access them as if they are a network mounted disk. So I tried using the native SMB protocol (available in Finder - Go - Connect to server). I tried dragging a file and dropping it onto my MAC's desktop. Surprisingly, I am only able to transfer at a very slow rate of about 1mb/s. Assuming network connectivity is not a problem, has anyone experienced incredible slowness with SMB? Are there alternative protocols for me to use in this case between PC and MAC?

    Read the article

  • Personal DNS server and fallback outside home

    - by Jens
    I have my own DNS server at home to access local names, and that is working fine. Then I have my laptop, now obviously my laptop leaves the home now and then, therefore it accesses different nets outside my home, and my DNS server is not accessible there... So I figured that I would just add Google as secondary DNS... But actually, when I do that, then suddenly I can't access my local stuff (at home that is, obviously), like my laptop is getting a quicker response from Google's DNS or something, because it can't find anything on the addresses I use locally. If I then remove the secondary DNS, and keeps my own, then it works fine again... So do I somehow need to seperate what DNS's to use on what nets? I already use sepperate DNS settings when I connect using my 3G modem, but when I use hotspots it seems to use the same settings regardless (at least in the train), also can it differ wired connections?... Is there another solution?

    Read the article

  • phpmyadmin forbidden after changing config for my IP

    - by Jonathan Kushner
    I followed the phpmyadmin setup and changed the config to require ip my ipaddress and allow from my ipaddress and its still telling me forbidden You don't have permission to access /phpmyadmin on this server. when I try to access the page on my browser (my server is not located on my machine). I installed everything using root. I also chmod 775 the entire phpMyAdmin folder. Im running RHEL 6.1. Any idea what to do at this point? Here is my /etc/httpd/conf.d/phpMyAdmin.conf: <Directory /usr/share/phpMyAdmin/> <IfModule mod_authz_core.c> # Apache 2.4 <RequireAny> Require ip myserveripaddress Require ip ::1 </RequireAny> </IfModule> <IfModule !mod_authz_core.c> # Apache 2.2 Order Deny,Allow Deny from All Allow from myserveripaddress Allow from ::1 </IfModule> </Directory>

    Read the article

  • remote desktop to Fedora 20 with xrdp

    - by 5YrsLaterDBA
    I was able to setup xrdp on my Fedora 13 machine and access it from my Windows 7 machine by follow the steps on the first post on this thread It was simple and easy. But when i try the same on my Fefora 20 machine, things are quite different. There is no error message but some new info like these: # chkconfig --levels 35 xrdp on Note: Forwarding request to 'systemctl enable xrdp.service'. # service xrdp start Redirecting to /bin/systemctl start xrdp.service and then I cannot remote it from my window machine. I also did the following based on the last post of above threa: # yum -y install tigervnc-server Any configuration I should do to make xrdp works for me? I was able to ping each other. EDIT: I can access the shared folder on my Windows machine from my Fedora 20. It seems the problem is on the Fedora side. how to know the service on linux is running? The "service --status-all" cannot give me useful information.

    Read the article

  • File/folder permissions and groups on Linux with Apache

    - by phobia
    I'm trying to learn about permissions on linux webserver with apache. Some clues to the system: The server I have to play around with is Fedora based. Apache runs as apache:apache. To allow for e.g. php to write to a file the file needs to be chmod 777. 755 is not sufficiant. What I'm wondering is basically how set up permissions like they should be on e.g. a "shared web host". My main problem is that if I set a permission so that one user cannot access anothers home folder, then apache can't read from the public_html folder either. To keep the users out I need to set chmod 700. But to let apache to read I need to have at least execute on world, so a 701 basically works, but won't let some users in. So I'm really stuck on what to do. Have been concidering adding the apache user to the frous grours below to avoid having to add the world execute flag, but is that a bad thing? Should it be the other way around, the users in the groups below should also be in the apache group? I was aiming at having 4 groups: 1. webapp same as dev_int, but is the only one that can go inside the webapp/live folder to e.g. do an update from the repo. 2. dev_int can read,write and execute everything in the "web root", including the two below, but nothing outside of the web root 3. dev_ext can read write and execute in all client folders, but cannot access anything outside of the webapp root 4. clientsBasic ftp accounts. Has a home folder with a public_html, but cannot access any other home folders An example of folder structure: webroot    no users in the aforementioned groups can go outside of here some_project    :dev_int only webapp live    :webapp only staging    :dev_int and :dev_ext clients    :dev_int and :dev_ext client_1    :dev_int, :dev_ext and client1:clients public_html dev developer_1    developer_1:dev_int OR :dev_ext public_html

    Read the article

  • X11Forwarding on MacOSX (Leopard/Snow Leopard)

    - by Shyam
    Hi, I have some remote boxes, which are a bunch of Mac Mini's. I access them now through SSH, and it fits my needs to do the maintenance. In the past, I used X11Forwarding with Linux boxes, when I was still using Debian myself, and I was able to run a specific application as if it was natively present (Firefox). I haven't succeeded to do this yet, but I assume because of the BSD underneath the fancy Apple GUI should be able to do such a task similar. I am aware of the remote administration, but I rather keep access limited to SSH on these boxes for inbound connections. Background information about the why's, tips, advice and comments are all helpful! Thanks!

    Read the article

  • Linux: cat /dev/video0 TS into some kind of ring puffer

    - by user155384
    I want to cat a /dev/video0 device output (Transport Stream) into a temporary ring buffer. In fact i do not want that the file is growing over the time. Simultaneously access is not possible. So the purpose is to have a file (buffer, Fifo, whatever) to be accessed by more than one consumer (example: tail -f, mencoder, VLC, ....). Some kind of scenario: 1# cat /dev/video0 > mybuffer.ts And then multiple access 2# tail -f mybuffer.ts > extract1.ts 2# tail -f mybuffer.ts > extract2.ts 3# ffmpeg ... Does someone have an idea how to do something like this?

    Read the article

  • Ethernet switch not working

    - by Froskoy
    I've just tried using two different ethernet switches on my network to replace an 8-port Netgear gigabit ethernet switch, which works fine, but doesn't have enough ports for what I need. Computers are connected to a TP-Link TD-8840T router via a switch. They use DHCP for IP address assignment. One switch is a TigerSwitch 6924M, which I'd expect to be difficult to set up, since it is second hand and has an advanced configuration menu, which I can't access without a serial port. However, the second switch that I tried is a new TP-Link TL-SF024, which doesn't appear to have any configuration options, so that can't be the problem. When I say "not working," I mean that although they display that they are connected to a network, they cannot access the internet. For example commands like "ping -c10 google.co.uk" come up with 100% packet loss. What could be causing the problem and how do I fix it?

    Read the article

  • Is Steam for Mac effectively running as superuser?

    - by godDLL
    When you download the client it does not weigh too much, and seems to do very little. Inside the app bundle there is a script that—upon inspecting the environment and deciding you're not running Linux—launches the client, which downloads the full support environment and resources. For this to happen (all of this is saved inside the bundle, the app bundle gets updated in this process) Steam wants Universal Access for Assistive Devices, and your password. Cacheable resources, preferences (like keyboard shortcuts), support files (like game hardware requirement lookup tables) live inside the bundle, not in ~/Library/{Application Support|Preferences|Cache}; games' data get dumped into ~/Documents/Steam Content. I'd describe myself as a bit OCD (which really says a lot), and I wouldn't care that much still. I'd go comb this hairy mess and find out where stuff is, when and if I need to, even if it's in an unfamiliar place; that does not actually tick me off. Well, a little bit. What makes me concerned is the way Steam needs both Access for Assistive Devices, and my password to run. The former gives it the ability to talk very intimately with running apps and the underlying system; while the latter (admin account) could very well give it and it's publishers unrestricted access to all my software, hardware and data. With publishers like Rockstar using scene NOCD cracks to publish their games on Steam, I'm not so sure I'm OK with this. I'd like more games made available for the MacOS X and all the pretty machines that run it, but this arrangement does not seem very Mac-like to me. It looks like Valve is going around system security measures and best practices, foregoing sandboxing, code signing, relatively sane structured organization; all the things that would appeal to someone who's no fun at parties at all, and will die alone, in his long dead mother's basement… wait. Right. Anyway. Can we get some input on Steam for Mac security at the end-user machine, from someone who understands how Accessibility API works, whether games distributed on Steam can read and write outside the user homefolder, collect data from other running apps, or similar?

    Read the article

  • Losing windows XP files. How to retrieve them?

    - by ravi
    I have a portable 500 GB HDD.Since last few days, all files of some folder are getting kinda corrupted.I can't access/delete them. Here is the example. If I try to access these files/folders, I get following error. This thing is kinda spreading in my HDD.Till now it has affected two folders worth 70 GB.In which one folder is backup folder where all my important data resides.So I am really in loss if I loose this data. How can I retrieve this data? Please help.

    Read the article

  • problems with WindowsImageBackup and write protected drives

    - by Ralph Shillington
    On Windows 7 I created a System image of my computer (C: and reserved partition) onto a USB drive. No problem. I then formatted the C: and installed the OS -- no problem Now I would like use the System Image and get back some of my documents etc. But I can't get access wo the WindowsImageBackup folder on the USB drive 1) Somehow the drive is write protected --- how did that happen? How do I unprotect that drive. 2) I can't access the WindowsImageBackup folder because I suspect the ACL is out of wack with my new SID. I would add my new SID to the ACL but I can't because the drive is write protected At the moment I'm completely disconnected from my files, which I thought (and still hope) are backed up. Understandably, panic is now setting in.

    Read the article

  • Nested RDP and ILO sessions, latency and keystroke repetition.

    - by ewwhite
    I'm working on a remote server installation entirely through ILO. Due to the software application and environment, my access is restricted to a Windows server that I must access through RDP. Going from that system to the target server is accomplished via HP ILO3. I'm trying to run a CentOS installation in an environment where I can't use a kickstart. I'm doing this via text mode, but the keystrokes are repeating randomly and it's difficult to select the proper installation options. I'm doing this using Microsoft's native RDP client (on Mac and Windows). I've also noticed this before when running installations or doing remote work in nested sessions. Is there a nice fix for this, or it it simply a function of the protocol?

    Read the article

  • Modify .htm files on wireless router

    - by mdeitrick
    What am I trying to do? I am attempting to access the .htm files on my wireless router to modify the look and feel of the Netgear GENIE webpage(s). What have I done? I've read several articles on eHow and Instructables that detail how to setup your router as an FTP server, since I figured the best way to access the files would be through FileZilla. Setting up an FTP server through my router doesn't sound like what I should do to accomplish my task... or perhaps it is? I've also read the documents provided by Netgear for getting started and setting up functionality on the router. Maybe I overlooked something? My specifications Netgear router WNR2000v3 FileZilla v3.8.1 UPDATE: Since someone voted to close this question I'll clarify what I'm asking for... At the present I am dissatisfied with the current UI/webpage look when logging into routerlogin.net. Furthermore I would like to make changes to the admin dashboard.

    Read the article

< Previous Page | 456 457 458 459 460 461 462 463 464 465 466 467  | Next Page >