Search Results

Search found 23576 results on 944 pages for 'case study'.

Page 463/944 | < Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >

• Is NVIDIA GeForce GTX 480 Video Card Compatbile with a Mac Pro Running Windows 7 Pro 64?

  - by aquat33nfan

  I have a Mac Pro (early 2008) and I'm running Windows 7 Pro (64 bit) natively (i.e., with just Windows installed and no OSX or boot camp) on it. If I buy an NVIDIA GeForce GTX 480 video card, will it work or do I have to buy a card that is Mac-specific (e.g., GeForce GTX 285 'for Mac')? Also, more generally, will Windows video cards work on Intel Macs running Windows (in case I pick a cheaper card)? I can't tell if it matters that a Mac does not have a bios. I searched other boards and I gathered that video cards would work fine because Windows has the proper drivers for them and OSX doesn't and not having the BIOS doesn't make a difference. I found one thread on here that seemed to indicate that as well, but I wanted to make sure. Thanks.

  Read the article

• Backup of whole harddrive during full operation with Acronis True Image Home 2010

  - by testing

  Currently I'm creating a backup of one of my hard drives. It's my main hard drive, where the operating system is running on. Because the backup is done during full operation I'm asking me if the backup really includes all files (registry, ...). Can I restore the backup on another hard drive and then run the operating system again without problems? Normally I would say that you have to boot from a CD (without running OS) to make a backup. I made a Google research but I didn't found my case so far.

  Read the article

• word 2010 Macro to name and Save file when opened

  - by Phillip Clark

  I have a word document template and will be using a hyper link in Excel to access the word file. The issue I need to resolve is making sure once it is opened a message field box is "popped" up asking the user to create a new file name ... (in this case the current date) for each time the file is opened. In the message pop when finished entering in file name they click yes and then the save screen comes up with the path/file type (macro enabled document) and the file name they have already entered in the pop up.. All they should have to do from the save screen is click ok and it saves the file to a certain path/folder on the C drive of the computer. Once they finish typing in their notes they click a active x button to save and close and they are finished. If anyone can help with this it would be fantastic.

  Read the article

• remote desktop connection help?

  - by robin agrahari

  sir, i have created a web application in eclipse,db2 database server is running on my pc.so i can access the web application through the address http://localhost:8080/LimsWeb i used team viewer software to establish a remote desktop connection. can my friend somehow connect to my pc so that when he types the above url in his browser he will be able to fetch the pages of the application. i was able to do this by connecting with remote desktop mode.but in that case my friend was able to use the application which i created running on my pc only and in the window provided by team viewer.i want that he can run the application on his own computer calling the given url from his own browser. please help

  Read the article

• What video codecs have most amount of content and thus popular at present/in future?

  - by goldenmean

  Hi, I want to find out if I can get some data on the percentage wise distribution of video content, for different video codecs currently used for video encoding. I know there are different applications/use-case scenarios which have different encoder used but i want to consdier all that and have a overall usage number(%) My guess is(highest to lowest % of content) - H.264(AVC) DivX MPEG2 VP6 Where do H.263, MPEG4, VC-1, RV, Theora, etc. fit in here. How may this look like in future? PS:I would like this to be community wiki to have get wider range of inputs, if someone with privileges can do it for me please. thank you. -AD

  Read the article

• vim + Ruby on Rails: how do you bounce among those 4-5 files you're currently working on?

  - by glitch

  I'm just starting to get familiar with vim, and I'd like to use it as my primary Rails development tool. As a Visual Studio and RubyMine user, I find a lot of stuff to be missing from the barebones vim installation, and therefore I went ahead and attempted to soup it up with plugins such as: rails.vim tcomment ruby-vim NERDtree and a couple of others. The issue is that I still don't quite get the average work-flow of using vim as one's Rails IDE. In RubyMine (again, similarly to Visual Studio) I have a series of tabs always open, containing the main files I'm switching among, and I additionally use NERDtree to open files from the folder structure. I tried opening them as new tabs, but the tab system in vim is just a lot more awkward than that in real IDEs. (I haven't seen vim pros in action, but I imagine that they'd not be relying on tabs, but using numerous splits instead, keeping at least a couple of files per split and switching between them with CTRL + ^. Is that the case?) So, at the end of the day, how do I really squeeze the most from vim if I want to be able to quickly access several files at once? Thank you!

  Read the article

• Why do certain replied emails missing threading when replied back in Mutt?

  - by yarun can

  I use Mutt for emails. I have threads enabled and I can see that most of the emails are threaded in Mutt. So that is all good. But sometimes I reply to an email and the answer(from other person) to my replied email wont be part of any threads. The thing is that when I reply in Mutt (which I use Vim to edit them), the subject parts keeps getting longer and longer with many "Re"s. That is the case with those emails with missing threads. I have: set strict_threads="yes" set sort="threads" set edit_headers=yes I am wondering if this has anything to do with Mutt or the person I am communicating over email. Could this one be the culprit? set metoo=yes Any suggestions?

  Read the article

• Is there an image viewer which *won't* show every file in the current folder?

  - by hawbsl

  Looking for a Windows image viewer which can be started from the command line but which allows me to specify/restrict which files I want it to page through. As parameters. The good 'ol Windows Picture Viewer would be fine except that it'll show/cycle through all the pictures in the current folder. In my case I want to say something like: someimgvwr.exe "cat.jpg" "cow.jpg" "cub.jpg" so that only those three files will be displayed and not "pig.jpg" which might also happen to be there in the same folder. Actually, if it allowed something like this: someimgvwr.exe "c*.jpg" that would be even more perfect. Do any of the many image viewers that are out there allow such a thing?

  Read the article

• Can I take a HDD in Raid1 and plug it straight into a different machine?

  - by jacko

  I would assume that I can just take my HDD out of my NAS (in raid1 mirror) and plug it into another enclosure and have it work off the bat but I'd like to make sure... Any ideas? Edit: My current setup is a Netgear ReadyNAS in (hardware) raid1. I'm hoping to replace this with a home theatre type PC (possibly running Ubuntu), and would like to migrate my data without having to do a bulk transfer over my network between the 2 machines. Can anyone confirm the case for the Netgear ReadyNAS?

  Read the article

• How to set up custom 401 error page or redirect in WSS3 SP2

  - by Stacy Vicknair

  I've got a WSS3 sharepoint site that requires windows authentication both in IIS and via the Sharepoint site. What I would like to do is in the case that a user does not provide valid AD credentials they are redirected to a custom error page. Currently, if the user immediately hits cancel when prompthey will see a plain text response of "401 UNAUTHORIZED". If they make an attempt and then hit cancel they instead see a blank page. I have looked into several options such as customErrors, httpModule interception (only saw examples for this after the user is authenticated), IIS Url rewrites (didn't see how this could help). Is there a good way to do this?

  Read the article

• Rejecting new HTTP requests when server reaches a certain throughput

  - by Sam

  I have a requirement to run an HTTP server that rejects new HTTP requests (with a 503, or similar) when the global transfer rate of current HTTP responses exceeds a certain level. For example, if the web server is transferring at 98Mbps, and a new HTTP request arrives, we would want to reject this (as we couldn't guarantee a good speed). I've had a look at mod_cband for Apache, limit_req for nginx, and lighttpd's rate limiting features, but none of them seem to handle my (rather contrived, granted) use case. I should add that I'm open to using pretty much any web server, and am open to implementing this in iptables rules if someone can craft such a rule! (Refusing the TCP connection is fine, it doesn't have to respond with an HTTP 503). Any suggestions?

  Read the article

• How to Architect a system on AWS for scaling (with a MySQL back-end)

  - by Edan Maor

  I'm trying to understand how to architect an Amazon Web Services application. As I understand it, the whole point of using something like AWS is to make the eventual scaling easier, so I'm trying to understand how to do that. I have an instance, running off of EBS (EBS-based instance, not a regular instance). My application (a Django app) uses MySQL as a back-end. So the question is, where am I supposed to install the MySQL? Do I install it on the same instance? In which case, as far as I can tell, I can't simply create more server instances from that image. Or am I supposed to simply spin up another server as a DB server, and run off of that? Thanks for any help!

  Read the article

• Custom LightDM sessions to launch an application

  - by zachtib

  I'm trying to set up Ubuntu to act as a kiosk running a custom application, and am trying to get a LightDM session built to automatically start it. Ideally, I'd like to have two sessions available from LightDM. The default would start my application fullscreened, and the other would open a minimal desktop in case any configuration (mostly connecting to a wireless network) needed to be done. I've done a lot of research over the last week on custom LightDM & Gnome sessions. I've got a custom greeter written for LightDM that can start either session, but I can't figure out how to add a specific application to the Gnome session that is ultimately started without just putting a launcher in the global startup directory, and I don't want to do that since I don't want the application starting when they open "configuration mode". Another problem I've run into on my current workaround is that the application doesn't fullscreen properly, which makes me think I'm not starting enough of a gnome session (currently it's just metacity, no panel or anything else). Edit: I found a solution. See http://www.webupd8.org/2011/11/make-applications-autostart-only-in.html

  Read the article

• Boundary conditions for testing

  - by Loggie

  Ok so in a programming test I was given the following question. Question 1 (1 mark) Spot the potential bug in this section of code: void Class::Update( float dt ) { totalTime += dt; if( totalTime == 3.0f ) { // Do state change m_State++; } } The multiple choice answers for this question were. a) It has a constant floating point number where it should have a named constant variable b) It may not change state with only an equality test c) You don't know what state you are changing to d) The class is named poorly I wrongly answered this with answer C. I eventually received feedback on the answers and the feedback for this question was Correct answer is a. This is about understanding correct boundary conditions for tests. The other answers are arguably valid points, but do not indicate a potential bug in the code. My question here is, what does this have to do with boundary conditions? My understanding of boundary conditions is checking that a value is within a certain range, which isn't the case here. Upon looking over the question, in my opinion, B should be the correct answer when considering the accuracy issues of using floating point values.

  Read the article

• Disadvantages of using a swap file/partition on an SSD, even when swappiness is set to 0

  - by pjv

  What are the disadvantages of using a swap file/partition on an SSD, even when swappiness is set to 0 I'm particularly interested in the /proc/sys/vm/swappiness=0 case. How much writes are still done, in practice, to that swap file, and does it have a negative impact to the SSD or any other disadvantage? Or would it nearly compare to not having a swap file? I am pretty aware of what swappiness=0 means, just not of what it amounts to in practice. My question stems from a problem I am experiencing without a swap: http://stackoverflow.com/questions/4567972/error-executing-aapt-all-of-the-sudden. There are similar questions regarding SSD and swap but they don't go in-depth into the swappiness=0: Disadvantages of not having a swap partition, Should I keep my swap file on an SSD drive?

  Read the article

• local .pac-file URL format that works with IE and Safari (Windows)?

  - by legr3c

  Say I want to use a proxy auto-config file that is stored at C:\proxy.pac. To make Internet Explorer use this configuration I have to specify the pac-file in the LAN settings in the following way: file://C:/proxy.pac But Safari, that uses the same proxy settings, will ignore it in this case. To make Safari use the pac-file I have to reference it as file:///C:/proxy.pac (3 slashes at the beginning) which, according to Wikipedia is the correct format. But this way Internet Explorer will ignore it. Opera and Chrome, that also use the same proxy settings, are fine with both ways but is there another option that will work with Safari and Internet Explorer at the same time?

  Read the article

• Run script at user login as root, with a catch

  - by tubaguy50035

  I'm trying to run a PHP script as root on user login. The PHP script adds a Samba share to the Samba config, thus the need for root privileges. The only issue here, is that the user doesn't exist yet. This system is integrated with active directory. So when a user logs in for the first time, a home directory for them is created under /home/DOMAIN/username. I've found this question and that seems like the correct way to get what I want, but I'm having trouble with the syntax since I don't know the user's name. Would it be something like: ALL ALL=(ALL) NOPASSWD: /home/DOMAIN/*/createSambaShare.php This doesn't seem to work as it is currently. Anyone have any ideas or a "scripted" way to add a Samba share on user login? Since I've made other changes to /etc/skel, I just added the bash necessary to run the PHP script in .profile in there. This then gets copied to the "new" user's home and it tries to run the PHP script. But it fails, because these are not privileged users. Changing permissions on the PHP script will not help. It needs to be run as sudo because it opens the Samba config file for writing. Letting any user run the PHP script would result in a PHP error. The homes Samba directive doesn't work for my use case. I need the Samba share to exist once they exist on the server, even when they're not logged in.

  Read the article

• GillSans font doesn't show up in any applications

  - by roboknight

  I am running Ubuntu 10.04, Lucid Lynx, and I'm trying to add some fonts for use with Libre Office. In particular, I've placed a GillSans.ttc font file into /usr/share/fonts/truetype by copying it there with: sudo cp GillSans.ttc /usr/share/fonts/truetype and then attempting to "install" it by updating the font cache: sudo fc-cache -fv That appears to complete successfully, however, the font never seems to be available to either Libre Office, nor fontmatrix. In addition, I tried adding the font to my .fonts directory, thinking that I was somehow seeing a cache of just user supplied fonts, but that isn't the case. The file is a .ttc file, is there some other tools I need to use to extract each font from the .ttc, or is there something else I must do to use a .ttc? Nothing appears to have any issue with the file, but it could be silently failing to do anything. I've looked for the answer in other places, but the only time that a similar question was asked, it did not appear to be answered, so I figured I would ask the question differently and see if anyone else might be able to clue me in on how to use a .ttc font file, if that is possible. A related question, are there any tools to see what font families/font names are contained within a .ttc font file?

  Read the article

• How to find what is written to filesystem under linux

  - by bardiir

  How can i find out what processes write to a specific disc over time? In my particular case I got a little homeserver running 24/7 and I included a script in the crontab to shutdown all drives that are not used (no change in /proc/diskstats for 15 minutes). But my system disc won't come down at all. I'm suspecting logs but it's probably not only logs writing to the filesystem on the system disk and I don't want to go all the way moving the logfiles to something else just to find out the disc still doesn't spin down and there's nothing i can do against it.

  Read the article

• MySQL Unions/Subselects not utilizing keys from associated tables

  - by Brett

  I've noticed by doing EXPLAINs that when a MySQL union between two tables is used, mysql creates a temporary table, but the temp table does not use keys, so queries are slowed considerably. Here is an example: SELECT * FROM ( SELECT `part_number`, `part_manufacturer_clean`, `part_number_clean`, `part_heci`, `part_manufacturer`, `part_description` FROM `new_products` AS `a` UNION SELECT `part` as `part_number`, `manulower` as `part_manufacturer_clean`, `partdeluxe` as `part_number_clean`, `heci` as `part_heci`, `manu` as `part_manufacturer`, `description` as `part_description` FROM `warehouse` AS `b` ) AS `c` WHERE `part_manufacturer_clean` = 'adc' EXPLAIN yields this: id select_type table type possible_keys key key_len ref rows Extra 1 PRIMARY <derived2> ALL (NULL) (NULL) (NULL) (NULL) 17206 Using where 2 DERIVED a ALL (NULL) (NULL) (NULL) (NULL) 17743 3 UNION b ALL (NULL) (NULL) (NULL) (NULL) 5757 (NULL) UNION RESULT <union2,3> ALL (NULL) (NULL) (NULL) (NULL) (NULL) In this case, part_manufacturer_clean and manulower are keys in both tables. When I don't use the subselects and union, and just use one table, everything works fine. I'm not sure if the issue is with the union or with the subselects. Is there any way to union two tables and still use keys/indexes for performance?

  Read the article

• What to do when you can not type a letter in Cygwin/bash

  - by Stenemo

  I had a very strange issue that happened as I was editing .bashrc or possible .profile, which made it impossible to press the letter "a" (it is not showing up on screen, although I am able to type it in all other programs as usual. I am not sure, but I was trying to get aliases to work on my computer at the time, so it is possible that I somehow aliased a to "", although I am not sure how that would have happened. I solved this by copying all the files in "cygwin\etc\skel\" (these are the backup starting files in case you ever need to replace them) into my home folder. Just leaving this question here so that other people which run into the same problem know what to do, not sure why I am unable to press "solve your question" at the moment, but I hope that someone who reads this knows how to edit this question so that the next person with this problem knows what to do. Also, not sure if this belongs in this forum or another one, but guess it is more of a unix question.

  Read the article

• Basic Puppet installation with Solaris 11.2 beta

  - by user13366125

  At the recent announcement we talked a lot about the Puppet integration. But how do you set it up? I want to show this in this blog entry. However this example i'm using is even useful in practice. Due to the extremely low overhead of zones i'm frequently seeing really large numbers of zones on a single system. Changing /etc/hosts or changing an SMF service property on 3 systems is not that hard. Doing it on a system with 500 zones is ... let say it diplomatic ... a job you give to someone you want to punish. Puppet can help in this case making of managing the configuration and to ease the distribution. You describe the changes you want to make in a file or set of file called manifest in the Puppet world and then roll them out to your servers, no matter if they are virtual or physical. A warning at first: Puppet is a really,really vast topic. This article is really basic and it doesn't goes more than just even toe's deep into the possibilities and capabilities of Puppet. It doesn't try to explain Puppet ... just how you get it up and running and do basic tests. There are many good books on Puppet. Please read one of them, and the concepts and the example will get much clearer immediately. (more)

  Read the article

• using gmail to send mails from your php?

  - by ajsie

  i've read some threads here in SO that someone managed to use gmail's smtp server to send out messages from php script. so if php sends a mail to [email protected] it looks like this: php tells sendmail (smtp server) to send the message sendmail sends the message to gmail's smtp server gmail's smtp server sends the message to hotmail's smtp server so now i wonder, why should one use gmail's smtp server to send a mail? isn't it better just to send the message from sendmail to hotmail's smtp server? correct me if im wrong, but isnt all that requires for a mail to be sent a communication between TWO smtp servers, the senders and the receivers (in this case, hotmail)? and another question, why can't php just send the message directly to hotmail's smtp server, why does it have to go through a local smtp server? and why do you call it a smtp server when sendmail is just acting like a client to send a message and does not receive anything? would be great if someone could shed a light on this topic!

  Read the article

• As a programmer, what's the most valuable non-English (human) language to learn?

  - by Andrew M

  I was thinking that with my developer skills, learning new languages like French, German etc. might be easier for me now. I could setup the verbs as objects in Python and use dir(verb) to find its methods, tenses and stuff ;-) But seriously, if you're a professional developer, in my case in the UK, what's the best foreign language to learn from an employment perspective? I'm thinking, like Hindi - if all our programming jobs are getting outsourced to India, might as well position yourself to be the on-site, go-between guy. Mandarin - if the Chinese become the pre-eminent economy, the new USA, in ten or twenty years, then speaking their language would open up a huge market to you. Russian - maybe another major up-and-comer, but already closer to Western standards. More IT-sector growth here than anywhere else in the coming years? Japanese - drivers of global technology, being able to speak their language could give you a big competitive advantage over other Westerners But I'm just guessing/musing with all these points. If you have an opinion, or even better, some evidence, I'd like to hear it. If the programming things falls through then at least it'll make for more interesting holidays.

  Read the article

• Rsync fails for files that start with underscore when destination is zfs

  - by Eric

  everyone. I'm using rsync3.1.0pre1 on Mac OS X 10.8.5, and am trying to rsync one folder to another. The destination is a ZFS volume mounted via SMB. The problem I'm having is that files that start with underscore (e.g., '_filename.jpg') are not being successfully synced to the destination. I get the following error message: rsync: mkstemp "/path/to/destination/._filename.jpg.NUgYJw" failed: Permission denied (13) In this case, '_filename.jpg' does not make it to the destination. I understand that rsync creates hidden, temporary files at the destination which are preceded with '.' and have a random file extension appended on the end. But the original filename starts with '', not '.', and I haven't asked rsync to copy extended attributes / resource forks over (unless it always does it). The rsync command I'm using is: rsync -avE --exclude='.DS_Store' --exclude '.Trash' --exclude 'Thumbs.db' --exclude '._*' --delete /source/ /destination/ Has anyone found a way around this problem? Thank you!

  Read the article

< Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >