Search Results

Search found 38328 results on 1534 pages for 'write xml'.

Page 463/1534 | < Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >

  • verisign certificate into jboss server SSL

    - by rfders
    i'm trying to enable jboss to uses ssl protocol using a previously generated certificate from verisign, i imported both certificate, server certificate and ca certificate into the keytore file, and i configured the server.xml to use that keystore and activate ssl protocol, then when i run the jboss, I got this error "certificate or key corresponds to the SSL cipher suites which are enabled" Question, reading some post on internet, i found that every example was made it generating a Certificate Request, it stricly necesary to do that if i already have the server certificate and that CSR has to be imported into the keystore as well ? at this point i'm very confused about this issue, i tried almost every solutions posted in several forums but till now i haven't any luck !! can you give me some tips in order to solve this problem. thanks in advance this are my keystore file: Keystore type: jks Keystore provider: SUN Your keystore contains 2 entries j2ee, Dec 29, 2009, trustedCertEntry, Certificate fingerprint (MD5): 69:CC:2D:2A:2D:EF:C4:DB:A2:26:35:57:06:29:7D:4C ugent, Dec 29, 2009, trustedCertEntry, Certificate fingerprint (MD5): AC:D8:0E:A2:7B:B7:2C:E7:00:DC:22:72:4A:5F:1E:92 and my server.xml configuration:

    Read the article

  • When to use delaycompress option in logrotate?

    - by Anand Chitipothu
    The man page of logrotate says that: It can be used when some program cannot be told to close its logfile and thus might continue writing to the previous log file for some time. I'm confused by this. If a program cannot be told to close its logfile, it will continue to write forever, not for sometime. If the compression is postponed to next rotation cycle, the program continues to write to that file even after the next rotation cycle. How is postponing solving the problem? My understanding is that copytruncate should be used when a program cannot be told to close the logfile. I'm aware that some data written to the logfile gets lost when the copy is in progress. I was looking at the logrotate file for couchdb, and it had both copytruncate and delaycompress options. /usr/local/couchdb-1.0.1/var/log/couchdb/*.log { weekly rotate 10 copytruncate delaycompress compress notifempty missingok } It looks like there is no point using delaycompress when copytruncate is already there. What am I missing?

    Read the article

  • Update Google Sitemap for Mobile

    - by dimo414
    I have a series of utilities to generate Google sitemaps for my whole site. These files are massive, and slow to build. We want to start telling Google these pages are mobile-crawl-able too, by adding them to mobile sitemaps, but the documentation is unclear if I need to specify physically different files for my mobile URLs than for my normal ones. If this is my current sitemap: <?xml version="1.0" encoding="UTF-8" ?> <urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9"> <url> <loc>http://mobile.example.com/article100.html</loc> </url> </urlset> Can I simply change it to: <?xml version="1.0" encoding="UTF-8" ?> <urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9" xmlns:mobile="http://www.google.com/schemas/sitemap-mobile/1.0"> <url> <loc>http://mobile.example.com/article100.html</loc> <mobile:mobile/> </url> </urlset> Or do I need to create new files with the additional markup, alongside my existing files?

    Read the article

  • Allow READ access to local folders in 2003SBS AD

    - by Dan M.
    Have a SBS2003 client with a mess of a domain that is in process of being cleaned. But, for the life of me I cannot find a setting that will allow write access to the local hard disk for domain users with redirected profiles(to the server). This is needed only for one program that will not follow a symbolic link to the network path, instead it seems to be hard coded to the %appdata% folder but only on the c: drive.... So question is how can I allow "Domain users" write access to the local %appdata% directory? I have tried setting it manually on a machine but it kept resetting to RO no matter how many times I tried. Everytime I would uncheck the RO property it would reset sometime right after i hit OK. Thanks in advance! Dan

    Read the article

  • script to count the occurence of the particular string in the given time interval

    - by pruthvi
    We are trying to write a script "sendemail.sh" to count the number of occurrence of a particular string in a log file "SendEmail.log" within the given interval. We have a log file. In that we are searching for a pattern "ReqInputMsgLog" and need to count the number of times it occurred in the given period for eg: from "2014-08-19 11:30" to "2014-08-19 11:34". And our script look like this: #!/bin/sh enterdate=$1 echo $enterdate enddate=$2 enterdate1=`date +%s -d $enterdate +"%Y-%m-%d %H:%M"` echo $enterdate1 enddate1=`date +%s -d $enddate +"%Y-%m-%d %H:%M"` echo $enddate count=0 cat SendEmail.log | grep "ReqInputMsgLog" | awk -F "[" '{print $3}' | awk -F "," '{print $1}' > /con/scripts_server/file.txt for line in `cat /con/scripts_server/file.txt` do logdate=`echo $line | awk -F : '{print $1":"$2}'` if [[ $logdate < $enddate1 ]]; then count=`expr $count + 1` fi done echo $count But when we are trying to execute the script by the below command its not showing the proper count. ./sendemail.sh "2014-08-19 11:30" "2014-08-19 11:34" Log file is very big one. Small chunk has been posted here. INFO [SIBJMSRAThreadPool : 5] [2014-08-19 11:18:24,471] SendEmail - 8/19/14 11:18 AM,ECCF25B0-0147-4000-E000-1B830A3C05A9,ReqInputMsgLog,SendEmail,<?xml version="1.0" encoding="UTF-8"?> <in:sendEmailRequestMsg xmlns:in="http://EmailMed/EmailMedInterface" xmlns:ns0="wsdl.http://EmailMed/EmailMedInterface" xmlns:ns1="http://EmailMed/EmailMedInterface" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:me="wsdl.http://EmailMed/EmailMedInterface" xsi:type="me:sendEmailRequestMsg"> <in:sendEmail xmlns:xci0="http://EmailMed/EmailMedInterface"> INFO [SIBJMSRAThreadPool : 7] [2014-08-19 11:18:14,235] SendEmail - 8/19/14 11:18 AM,ECCEFDB2-0147-4000-E000-1B830A3C05A9,ReqInputMsgLog,SendEmail,<?xml version="1.0" encoding="UTF-8"?> <in:sendEmailRequestMsg xmlns:in="http://EmailMed/EmailMedInterface" xmlns:ns0="wsdl.http://EmailMed/EmailMedInterface" xmlns:ns1="http://EmailMed/EmailMedInterface" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:me="wsdl.http://EmailMed/EmailMedInterface" xsi:type="me:sendEmailRequestMsg"> <in:sendEmail xmlns:xci0="http://EmailMed/EmailMedInterface"> INFO [SIBJMSRAThreadPool : 7] [2014-08-19 11:18:14,241] SendEmail - xmlText: <?xml version="1.0" encoding="UTF-8"?> after awk command we will get a file "/con/scripts_server/file.txt" which looks similar like below: 2014-08-19 11:28:03 2014-08-19 11:28:06 2014-08-19 11:28:17 2014-08-19 11:28:53 2014-08-19 11:29:02 2014-08-19 11:29:47 2014-08-19 11:29:57 2014-08-19 11:30:07 2014-08-19 11:30:17 2014-08-19 11:30:19 2014-08-19 11:30:19 2014-08-19 11:30:22 2014-08-19 11:30:25 2014-08-19 11:30:25 2014-08-19 11:30:36 2014-08-19 11:30:51 2014-08-19 11:30:56 2014-08-19 11:30:59 2014-08-19 11:30:59 2014-08-19 11:31:08 2014-08-19 11:31:25 2014-08-19 11:32:19 2014-08-19 11:32:22 2014-08-19 11:32:27 2014-08-19 11:32:28 2014-08-19 11:32:41 2014-08-19 11:32:49 2014-08-19 11:32:59 2014-08-19 11:33:27 2014-08-19 11:33:41 2014-08-19 11:34:07 2014-08-19 11:34:14 2014-08-19 11:34:21 2014-08-19 11:34:25 2014-08-19 11:34:38 2014-08-19 11:34:50 2014-08-19 11:34:58

    Read the article

  • How to alter image pixels of a wild life bird?

    - by NoobScratcher
    Hello so I was hoping someone knew how to move or change color and position actual image pixels and could explain and show the code to do so. I know how to write pixels on a surface or screen-surface usigned int *ptr = static_cast <unsigned int *> (screen-pixels); int offset = y * (screen->pitch / sizeof(unsigned int)); ptr[offset + x] = color; But I don't know how to alter or manipulate a image pixel of a png image my thoughts on this was How do I get the values and locations of pixels and what do I have to write to make it happen? Then how do I actually change the values or locations of those gotten pixels and how do I make that happen? any ideas tip suggestions are also welcome! int main(int argc , char *argv[]) { SDL_Surface *Screen = SDL_SetVideoMode(640,480,32,SDL_SWSURFACE); SDL_Surface *Image; Image = IMG_Load("image.png"); bool done = false; SDL_Event event; while(!done) { SDL_FillRect(Screen,NULL,(0,0,0)); SDL_BlitSurface(Image,NULL,Screen,NULL); while(SDL_PollEvent(&event)) { switch(event.type) { case SDL_QUIT: return 0; break; } } SDL_Flip(Screen); } return 0; }

    Read the article

  • Java Champion Dick Wall Explores the Virtues of Scala (otn interview)

    - by Janice J. Heiss
    In a new interview up on otn/java, titled “Java Champion Dick Wall on the Virtues of Scala (Part 2),” Dick Wall explains why, after a long career in programming exploring Lisp, C, C++, Python, and Java, he has finally settled on Scala as his language of choice. From the interview: “I was always on the lookout for a language that would give me both Python-like productivity and simplicity for just writing something and quickly having it work and that also offers strong performance, toolability, and type safety (all of which I like in Java). Scala is simply the first language that offers all those features in a package that suits me. Programming in Scala feels like programming in Python (if you can think it, you can do it), but with the benefit of having a compiler looking over your shoulder and telling you that you have the wrong type here or the wrong method name there.The final ‘aha!’ moment came about a year and a half ago. I had a quick task to complete, and I started writing it in Python (as I have for many years) but then realized that I could probably write it just as fast in Scala. I tried, and indeed I managed to write it just about as fast.”Wall makes the remarkable claim that once Java developers have learned to work in Scala, when they work on large projects, they typically find themselves more productive than they are in Java. “Of course,” he points out, “people are always going to argue about these claims, but I can put my hand over my heart and say that I am much more productive in Scala than I was in Java, and I see no reason why the many people I know using Scala wouldn’t say the same without some reason.”Read the interview here.

    Read the article

  • What are some general guidelines for setting up an iOS project I will want to personally publish but sell in the future?

    - by RLH
    I have an idea for a personal iOS project that I would like to write and release to the iOS store. I'm the type of developer who enjoys developing and publishing. I want to write quality software and take care of my customers. Assuming that I wrote an application that had reasonable success, there is a fair chance that I would want to sell the ownership rights of the app to another party and I'd use the proceeds to develop my next personal project which, in turn, I'd probably want to sell in the future. With that said, what are some general guidelines for creating, making and publishing an iOS project that I will eventually want to transfer to another company/developer? I know this is a bit of a broad question, but I request that the given advice be a general list of tips, suggestions and pitfalls to avoid. If any particular bullet point on your list needs more explanation, I'll either search for the answer or post a new question specific to that requirement. Thank you! Note Regarding this Question I am posting this question on Programmers.SO because I think that this is an issue of software architecting, seeking advice for setting a new application project and publishing a project to the Apple iOS store-- all within the requirements for questions on this site.

    Read the article

  • StyleCop Custom Rules

    - by Aligned
    There are several blogs on how to do this (http://scottwhite.blogspot.com/2008/11/creating-custom-stylecop-rules-in-c.html, etc). I’ve found a few useful things to point out: Debugging is difficult, but here are the steps (thanks to Tintin’s answer). “One way: 1) Delete your custom rules 2) Open Visual Studio (for dev), open your custom rule solution 3) Build & Deploy custom rules (a PostBuild action to copy the rules into the StyleCop folder is handy) 4) Open Visual Studio (for test) 5) Use VS (dev) and Attach to process devenv.exe (the test VS instance), set breakpoints in the rules you want to debug 6) Use VS’ (test) and right-click on project, Run StyleCop 7) Debug” ~ it worked once, now I’m having problems getting it to work again ~ I also get the message “Cannot evaluate expression because the code of the current method is optimized.” when I try to look at properties. Looking at the source code of the StyleCop.CSharp.Rules.dll that comes with the install. I used JustDecompile from Telerik. Create one xml file and name it the same as the one cs file (CodingGuildelineRules.cs and CodingGuidelinRules.xml) Deploy: 1. Build in Visual Studio 2. Close Visual Studio (Style cop is running so you can’t override your dll without closing) 3. Copy the dll from the bin to the C: \Program Files (x86)\StyleCop 4.7\ 4. Open the settings file or re-open Visual Studio

    Read the article

  • How-To Geek is Hiring a Geeky Writer – Here Are the Details

    - by The Geek
    Think you have the perfect combination of geek knowledge and writing skills? We’re looking for an experienced writer to join our team, and here are all the details. We need a new writer to cover topics surrounding Windows 7 or 8, home networking, home routers, security, media, troubleshooting, mobile devices, and many similar topics. We are not looking for writers that focus solely on Linux or tech news writers. Please apply if you have the following qualities: You must be a geek at heart. You must be able to put in plenty of time, work, and dedication. If you’re too busy already, don’t apply. You must be able to write articles that are easy to understand. You must be creative. You must generate ideas for articles on your own, and take suggestions like a pro. You must be at least 18 years old. You must have solid English writing skills. You must be able to write tips, how-to articles, explainers, guides, instructional articles, etc. Again, we are not looking for tech news writers. Here’s a couple of our previous articles so you can get an idea of what we’re looking for in terms of quality and content. Please make sure to look through these before you decide to apply. How-to Article: Make Your Own Windows 8 Start Button with Zero Memory Usage Explainer: HTG Explains: When Do You Need to Update Your Drivers? Explainer: HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? How-To Article: How to Factory Reset Your Android Phone or Tablet When It Won’t Boot How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere

    Read the article

  • svcbundle for easier SMF manifest creation

    - by Glynn Foster
    One of the new features we've introduced in Oracle Solaris 11.1 is a new utility called svcbundle. This utility allows for the easy creation of Service Management Facility (SMF) manifests and profiles, allowing you to take advantage of the benefits of automatic application restart without requiring you to have full knowledge of the XML file format that is used when integrating with the SMF. Integrating into SMF is one of the easiest and most obvious ways to take advantage of some of the mission critical aspects of the operating system, but many customers were often finding the initial learning curve of creating an XML manifest to be too hard. With the release of Oracle Solaris 11 11/11, SMF had a more integral part to play as more and more system configuration was starting to use the SMF configuration repository for the backend storage. This provides a number of aspects, including the ability to carefully manage customized administrative configuration, site specific configuration, and vendor provided configuration at different layers, helping to preserve them during system update. I've written a new article, Using svcbundle to Create SMF Manifests and Profiles in Oracle Solaris 11, to give you a feel for the help we can provide in converting your applications over to SMF, or doing some site wide configuration using profiles. This is the first pass at creating such a tool, so we'd love to hear feedback of your experiences using it.

    Read the article

  • Howto maintain an EXT3 filesystem

    - by Reinoud van Santen
    Lately I had several servers which encountered a write error on an EXT3 filesystem and as a result of that remounted the filesystem read-only. Understandably on a production server this causes severe problems. On a reboot the filesystem where fixed but on large partitions this takes a lot of time. After the filesystem was fixed, correcting several errors, the server runs well again. What can I do to minimize the rate at which this happens? I can't seem to find much information on periodically checking the filesystem(s) on a running server. Is it possible to change the way in which EXT3 / the system handles write errors? What would be a sane solution. All servers which this is regarding to are running CentOS Linux 5.4 or 5.5.

    Read the article

  • TDD with SQL and data manipulation functions

    - by Xophmeister
    While I'm a professional programmer, I've never been formally trained in software engineering. As I'm frequently visiting here and SO, I've noticed a trend for writing unit tests whenever possible and, as my software gets more complex and sophisticated, I see automated testing as a good idea in aiding debugging. However, most of my work involves writing complex SQL and then processing the output in some way. How would you write a test to ensure your SQL was returning the correct data, for example? Then, say if the data wasn't under your control (e.g., that of a 3rd party system), how can you efficiently test your processing routines without having to hand write reams of dummy data? The best solution I can think of is making views of the data that, together, cover most cases. I can then join those views with my SQL to see if it's returning the correct records and manually process the views to see if my functions, etc. are doing what they're supposed to. Still, it seems excessive and flakey; particularly finding data to test against...

    Read the article

  • How to cut the line between quality and time?

    - by m3th0dman
    On one hand, I have been taught by various software engineering books ([1] as example) that my job as a programmer is to make the best possible software: great design, flexibility, to be easily maintained etc. One the other hand although I realize that I actually write software for money and not for entertainment, although is very nice to write good code and plan ahead and refactor after writing and ... I wonder if it is always best for the business (after all we should be responsible). Is the business always benefiting from a best code? Maybe I'm over-engineering something, and it's not always useful? So how should I know when to stop in the process to achieving the best possible code? I am sure that experience is something that makes a difference here, but I believe this cannot be the only answer. [1] Uncle Bob's in Clean Code says at page 6 about the fact that: They [managers] may defend the schedule and requirements with passion; but that’s their job. It’s your job to defend the code with equal passion.

    Read the article

  • Playing Around with WebLogic Maven Plug-In by Flavius Sana

    - by JuergenKress
    Packaged with WebLogic 12c wls-maven-plugin let’s you install, start and stop servers, create domain, execute WLST scripts, compile and deploy applications. The plug-in works with Maven 2.x and 3.x. WebLogic 12c can be downloaded from http://www.oracle.com/technetwork/index.html. Developers version has around  180MB (zip archive).  To install the plugin we need first to extract wls-maven-plugin.jar.pack and pom.xml $unzip ~/Downloads/wls1212_dev.zip wls12120/wlserver/server/lib/wls-maven-plugin.jar.pack $unzip ~/Downloads/wls1212_dev.zip wls12120/wlserver/server/lib/pom.xml Now, let’s unpack the jar file: $unpack200 -r wls12120/wlserver/server/lib/wls-maven-plugin.jar.pack wls12120/wlserver/server/lib/wls-maven-plugin.jar Install the plug-in in the local repository. Read the complete article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Maven,Flavius Sana,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Apply a BSU patch manually in Off-line Mode

    - by adejuanc
    To apply patch or patches in Off-line mode.Note that you will need at least the patch-catalog.xml and one patch jar file.BSU Patch Installation Off-line Mode------------------------------------------------------------------------------------------------------------Apply patch or patches in Off-line modeNote: To apply the patch in offline mode refer to the section 8 Using the Command-Line Interface of Using the Command-Line Interface guide availablehere - http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14143/toc.htmSteps:1. Make sure you have the following files inside Folder WLS_ORACLE_HOME/utils/bsu/cache_dir- patch-catalog.xml- XXXX.jarNote that XXXX is the patch ID, is just a reference name.2. Apply the patch by running the following command:> cd WLS_ORACLE_HOME/utils/bsu/> ./bsu.sh -prod_dir=WLS_ORACLE_HOME/wlserver_10.3 -patchlist=<Patch_Id> -verbose -installFor example:> ./bsu.sh -prod_dir=/Oracle/Middleware/wlserver_10.3 -patchlist=XXXX -verbose -installAfter this the patch should be applied successfully.3. You can view the report of applied patches by running the following command:> ./bsu.sh -report -patch_id_mask=<Patch_Id>For example: > ./bsu.sh -report -patch_id_mask=XXXX4. Restart the server and watch the standard output logs to verify the installation.5. If you have more patches to apply go to step 1.6. Repeat the process on each Instance Server including the admin Server.

    Read the article

  • Problem booting hard drive after installing Centos from USB Stick

    - by Rick
    Here is the situation, I created a Centos Live 5.4 Bootable USB drive. I used this to install Centos on a HP Netbook. BTW: the Netbook doesn't have a CDRom so I used the usb key. When the system goes to write the Grub boot loader to disk, it wants to write the boot loader to the usb drive (/dev/sda), not the hard disk (/dev/hda). I do have the option of writing the boot loader to /dev/hda, (not to the mbr!) but when I reboot I get an load error and the Grub prompt. How can I get Centos booting from the hard disk instead of using the USB key. Thanks.

    Read the article

  • Sitecore Item Web API and Json.Net Test Drive (Part II –Strongly Typed)

    - by jonel
    In the earlier post I did related to this topic, I have talked about using Json.Net to consume the result of Sitecore Item Web API. In that post, I have used the keyword dynamic to express my intention of consuming the returned json of the API. In this article, I will create some useful classes to write our implementation of consuming the API using strongly-typed. We will start of with the Record class which will hold the top most elements the API will present us. Pretty straight forward class. It has 2 properties to hold the statuscode and the result elements. If you intend to use a different property name in your class from the json property, you can do so by passing a string literal of the json property name to the JsonProperty attribute and name your class property differently. If you look at the earlier post, you will notice that the API returns an array of items that contains all of the Sitecore content item or items and stores them under the result->items array element. To be able to map that array of items, we have to write a collection property and decorate that with the JsonProperty attribute. The JsonItem class is a simple class which will map to the corresponding item property contained in the array. If you notice, these properties are just the basic Sitecore fields. And here’s the main portion of this post that will binds them all together. And here’s the output of this code. In closing, the same result can be achieved using the dynamic keyword or defining classes to map the json propery returned by the Sitecore Item Web API. With a little bit more of coding, you can take advantage of power of strongly-typed solution. Have a good week ahead of you.

    Read the article

  • Facebook App EULA & Restrictions: What can't they do that my web app can?

    - by Adam Tannon
    I have written a nifty little web app (in Java/GWT/JS) and have been experimenting with the idea of making it available through Facebook as a Facebook App as well. After spending some time reading Facebook's developer docs, it seems like I can just create a Facebook App to point at any URL I want and use that as the app/canvas. It accomplishes this via iframes. So, my tentative plan is to just point it towards my (existing) web app so that I don't have to totally re-write it. But then that got me thinking: Facebook must regulate what sorts of things can be done through a Facebook App, vs. what an app can't do. For instance, I can't imagine I can point a Facebook App to point at a URL for a web app that accepts e-commerce payments (that would by-pass Facebook altogether and not allow them to take a cut from the ecom transaction!). Also, I can't imagine that Facebook allows developers to point their Facebook Apps to just any old URL without some sort of a scan, otherwise that would open Facebook up to the horrors of every security threat knownst to humanity. I know for a fact that when you write an iOS native app and put it up on the Apple App Store, that Apple actually scans your source code for violations of their EULA. So my question: does Facebook do the same? If so, what are their terms & conditions for what a Facebook app can/can't do? Suprisingly, I can't find this anywhere!! Thanks in advance!

    Read the article

  • problem with MySQL installation : template configuration file cannot be found

    - by user35389
    Trying to install MySQL onto the Windows XP machine. While going through the installation steps (in the "MySQL Server Instance Config. Wizard"), I get to a point where it the window reads: MySQL Server Instance Configuration (bold header) Choose the configuration for the server instance. Ready to execute... o Prepare configuration o Write configuration file o Start service o Apply security settings (this line is greyed out) Please press [Execute] to start the configuration. [ Back ] [ Execute ] [ Cancel ] So I press execute, and then a red X appears in the second step: Write configuration file and at the bottom, where it originally said: Please press [Execute] to start the configuration. It now says: The template configuration file cannot be found at C:\Program Files\MySQL\MySQL Server 5.0\bin\my-template.cnf I'm unsure what it means, but I canceled the config wizard and looked in the directory that had been created (C:\Program Files\MySQL\MySQL Server 5.0). There are some configuration settings files, and there are 4 folders: bin data Docs share

    Read the article

  • New Linux Mint User Networking questions

    - by nyCecilia
    I have a readynas that I've been using with XP, Vista, and Win7. Because of weirdness with Vista, it is set up for full read/write guest access. Now I have a Linux Mint netbook. I have set up smb on it and can read from the readynas smb shares, but I can't write. What else can I check? Part2--(keep in mind my network knowledge is small...or smaller) what is the difference between NFS and SMB, can a readynas be set up to allow access to the SMB shares via NFS (if I can figure out NFS lol)? A link to a guide for beginners would be appreciated, google searching "Linux Mint Readynas" doesn't give me anything useful.

    Read the article

  • JNDI Datasource definition in Tomcat 6.0

    - by romaintaz
    Hi all, I want to define a DataSource to an Oracle database on my Tomcat 6.0. So, in conf/server.xml (yes, I know that this DataSource will be available for all the webapps in Tomcat, but it's not a problem here), I've set this Resource: <GlobalNamingResources> <Resource name="hibernate/HibernateDS" auth="Container" type="javax.sql.DataSource" url="jdbc:oracle:thin:@myserver:1542:foo" username="foo" password="bar" driverClassName="oracle.jdbc.OracleDriver" maxActive="50" maxIdle="10" validationQuery="select 1 from dual"/> Then, in the web.xml of my application, I set a resource-ref element: <resource-ref> <description>Hibernate Datasource</description> <res-ref-name>hibernate/HibernateDS</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> Finally, as Hibernate is used to manage the database connection, I have a webapps/mywebapp/WEB-INF/classes/hibernate.cfg.xml that creates a session-factory using the JNDI DataSource: <hibernate-configuration> <session-factory> <property name="connection.datasource">java:comp/env/hibernate/HibernateDS</property> ... However, when I start my Tomcat server, I get an error that says it could not create the INFO [net.sf.hibernate.util.NamingHelper] JNDI InitialContext properties:{} INFO [net.sf.hibernate.connection.DatasourceConnectionProvider] Using datasource: java:comp/env/hibernate/HibernateDS INFO [net.sf.hibernate.transaction.TransactionFactoryFactory] Transaction strategy: net.sf.hibernate.transaction.JDBCTransactionFactory INFO [net.sf.hibernate.transaction.TransactionManagerLookupFactory] No TransactionManagerLookup configured (in JTA environment, use of process level read-write cache is not recommended) WARN [net.sf.hibernate.cfg.SettingsFactory] Could not obtain connection metadata org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create JDBC driver of class '' for connect URL 'null' at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1150) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880) at net.sf.hibernate.connection.DatasourceConnectionProvider.getConnection(DatasourceConnectionProvider.java:59) at net.sf.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:84) at net.sf.hibernate.cfg.Configuration.buildSettings(Configuration.java:1172) ... Caused by: java.lang.NullPointerException at sun.jdbc.odbc.JdbcOdbcDriver.getProtocol(JdbcOdbcDriver.java:507) at sun.jdbc.odbc.JdbcOdbcDriver.knownURL(JdbcOdbcDriver.java:476) at sun.jdbc.odbc.JdbcOdbcDriver.acceptsURL(JdbcOdbcDriver.java:307) at java.sql.DriverManager.getDriver(DriverManager.java:253) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1143) ... 11 more Do you have any idea why Hibernate is not able to construct the session-factory? What is wrong in my configuration?

    Read the article

  • Scripting language for filling out web form

    - by ityler22
    I have a job as an intern at a technology company, I was given the unfortunate job of performing some data entry into our web management system. The information entered into the web form is stored in a MySQL DB. Upon receiving the data I realized I would have to submit this online form about 1000 different times all consisting of about 10 different text fields / check boxes per form. (So in other words, would be completely mind numbing and be a ridiculous waste of time and resources, or so I thought...) Having used databases a good bit prior to this, my immediate reaction was to just write a short MySQL script to bulk import all of the data, especially since it was already presented to me in an excel spreadsheet ready to go. Thought it may have been some sort of a test since it seemed too obvious. I wrote the script which consisted of about 10 lines of code but was then informed I couldn't be trusted with MySQL Admin privileges to run said script. So my next thought would be to write a script to just enter the information through the web form (Which will take ten times longer but it's what I have to) Being unfamiliar with scripting of this nature (seems like I would need something similar to a bot, but the good kind) I was unsure of how to proceed to do this. Is there a preferred language to use to enter the data i have into the web form I do have access to? I'm not particularly looking for this to be done for me by any means just a nice point in the right direction as far as what scripting language to use and how to pair that with the data I have that needs to be entered. Thanks for the help/ valuable input! EDIT: Is there a way to perform this using perl without having access to place any files on the server? Would I be able to run some Javascript loops to pull the data out of .csv or just a .txt format with line delimiters and insert it into the web form?

    Read the article

  • Can too much abstraction be bad?

    - by m3th0dman
    As programmers I feel that our goal is to provide good abstractions on the given domain model and business logic. But where should this abstraction stop? How to make the trade-off between abstraction and all it's benefits (flexibility, ease of changing etc.) and ease of understanding the code and all it's benefits. I believe I tend to write code overly abstracted and I don't know how good is it; I often tend to write it like it is some kind of a micro-framework, which consists of two parts: Micro-Modules which are hooked up in the micro-framework: these modules are easy to be understood, developed and maintained as single units. This code basically represents the code that actually does the functional stuff, described in requirements. Connecting code; now here I believe stands the problem. This code tends to be complicated because it is sometimes very abstracted and is hard to be understood at the beginning; this arises due to the fact that it is only pure abstraction, the base in reality and business logic being performed in the code presented 1; from this reason this code is not expected to be changed once tested. Is this a good approach at programming? That it, having changing code very fragmented in many modules and very easy to be understood and non-changing code very complex from the abstraction POV? Should all the code be uniformly complex (that is code 1 more complex and interlinked and code 2 more simple) so that anybody looking through it can understand it in a reasonable amount of time but change is expensive or the solution presented above is good, where "changing code" is very easy to be understood, debugged, changed and "linking code" is kind of difficult. Note: this is not about code readability! Both code at 1 and 2 is readable, but code at 2 comes with more complex abstractions while code 1 comes with simple abstractions.

    Read the article

  • Android From Local DB (DAO) to Server sync (JSON) - Design issue

    - by Taiko
    I sync data between my local DB and a Server. I'm looking for the cleanest way to modelise all of this. I have a com.something.db package That contains a Data Helper and couple of DAO classes that represents objects stored in the db (I didn't write that part) com.something.db --public DataHelper --public Employee @DatabaseField e.g. "name" will be an actual column name in the DB -name @DatabaseField -salary etc... (all in all 50 fields) I have a com.something.sync package That contains all the implementation detail on how to send data to the server. It boils down to a ConnectionManager that is fed by different classes that implements a 'Request' interface com.something.sync --public interface ConnectionManager --package ConnectionManagerImpl --public interface Request --package LoginRequest --package GetEmployeesRequest My issue is, at some point in the sync process, I have to JSONise and de-JSONise my data (E.g. the Employee class). But I really don't feel like having the same Employee class be responsible for both his JSONisation and his actual representation inside the local database. It really doesn't feel right, because I carefully decoupled the rest, I am only stuck on this JSON thing. What should I do ? Should I write 3 Employee classes ? EmployeeDB @DatabaseField e.g. "name" will be an actual column name in the DB -name @DatabaseField -salary -etc... 50 fields EmployeeInterface -getName -getSalary -etc... 50 fields EmployeeJSON -JSON_KEY_NAME = "name" The JSON key happens to be the same as the table name, but it isn't requirement -name -JSON_KEY_SALARY = "salary" -salary -etc... 50 fields It feels like a lot of duplicates. Is there a common pattern I can use there ?

    Read the article

< Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >