Search Results

Search found 19018 results on 761 pages for 'raw input'.

Page 464/761 | < Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >

  • Issue with Netgear GS108T Managed Switch and Jumbo Frames

    - by Richie086
    I recently purchased a Netgear GS108T managed switch and I am trying to configure jumbo packets between my NAS (Thecus N4100Pro), PC and managed switch. I should mention the fact that I was able to use jumbo frames between my PC and NAS before I purchased the switch without issue. My Desktop has a wired gigabit NIC (Intel 82579V Gigabit) and has the ability to configure jumbo frames (see pic) that are either 9014 bytes or 4088 bytes. I choose 9014 bytes for the jumbo frame size My NAS supports jumbo frames as well, and is configured to use 9014 as the frame size. When I go into my Netgear managed switch and set the frame size to 9014 on the ports I am using for my PC and NAS. See image As soon as I hit apply in the web interface, I loose my connection to the SMB shares on my NAS and I can no longer connect to the web admin interface for my NAS. The really strange thing is I can ping my NAS via the ping command, but when I try to connect to the web interface on port 80 or port 443 the page never loads. I did a scan from my PC to my NAS using nmap and I can see the following ports open PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 631/tcp open ipp 2000/tcp open cisco-sccp 2049/tcp open nfs 3260/tcp open iscsi 49152/tcp open unknown MAC Address: 00:14:FD:15:00:44 (Thecus Technology) Read data files from: C:\Program Files (x86)\Nmap Nmap done: 1 IP address (1 host up) scanned in 211.97 seconds Raw packets sent: 1 (28B) | Rcvd: 1 (28B) Anyone have any idea what is going on here? Why is nmap able to detect the ports are open and listening for http, https and file sharing but I cant connect when all devices have jumbo packets enabled? Stranger still - I did a packet capture using wireshark while the nmap scan was running and filtered so I only saw converstations between my PC and my NAS. Here are the packet details from my scan Only 4 packets over 5k bytes? What is going on here? Do I not need to configure jumbo frame sizes on the switch? I have an internet connection from my pc to the switch to my router - I just cannot connect to my NAS. I just checked on my iPhone and I am able to open my NAS web admin interface without issue on my iPhone! WTF!!!!!! Let me know if you need more details..

    Read the article

  • Cant access a remote server due mistake by setting firewall rule

    - by LMIT
    I need help due a my silly mistake! So for long time i have a dedicate server hosted by register.it Usually i access remotly to this server (Windows 2008 server) by Terminal Server. Today i wanted to block one site that continually send request to my server. So i was adding a new rule in the firewall (the native firewall on windows 2008 server), as i did many time, but this time, probably i was sleeping with my brain i add a general rules that stop everything! So i cant access to the server anymore, as no any users can browse the sites, nothing is working because this rule block everything. I know that is a silly mistake, no need to tell me :) so please what i can do ? The only 1 thing that my provider let me is reboot the server by his control panel, but this not help me in any way because the firewall block me again. i have administrator username and password, so what i really can do ? there are some trick some tecnique, some expert guru that can help me in this very bad situation ? UPDATE i follow the Tony suggest and i did a NMAP to check if some ports are open but look like all closed: NMAP RESULT Starting Nmap 6.00 ( http://nmap.org ) at 2012-05-29 22:32 W. Europe Daylight Time NSE: Loaded 93 scripts for scanning. NSE: Script Pre-scanning. Initiating Parallel DNS resolution of 1 host. at 22:32 Completed Parallel DNS resolution of 1 host. at 22:33, 13.00s elapsed Initiating SYN Stealth Scan at 22:33 Scanning xxx.xxx.xxx.xxx [1000 ports] SYN Stealth Scan Timing: About 29.00% done; ETC: 22:34 (0:01:16 remaining) SYN Stealth Scan Timing: About 58.00% done; ETC: 22:34 (0:00:44 remaining) Completed SYN Stealth Scan at 22:34, 104.39s elapsed (1000 total ports) Initiating Service scan at 22:34 Initiating OS detection (try #1) against xxx.xxx.xxx.xxx Retrying OS detection (try #2) against xxx.xxx.xxx.xxx Initiating Traceroute at 22:34 Completed Traceroute at 22:35, 6.27s elapsed Initiating Parallel DNS resolution of 11 hosts. at 22:35 Completed Parallel DNS resolution of 11 hosts. at 22:35, 13.00s elapsed NSE: Script scanning xxx.xxx.xxx.xxx. Initiating NSE at 22:35 Completed NSE at 22:35, 0.00s elapsed Nmap scan report for xxx.xxx.xxx.xxx Host is up. All 1000 scanned ports on xxx.xxx.xxx.xxx are filtered Too many fingerprints match this host to give specific OS details TRACEROUTE (using proto 1/icmp) HOP RTT ADDRESS 1 ... ... ... 13 ... 30 NSE: Script Post-scanning. Read data files from: D:\Program Files\Nmap OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 145.08 seconds Raw packets sent: 2116 (96.576KB) | Rcvd: 61 (4.082KB) Question: The provider locally can access by username and password ?

    Read the article

  • MySQL Execution Time Spikes

    - by Brett
    I am having issues with MySQL all of the sudden today. Details: OS: CentOS release 5.7 Server type: Parallels virtuozzo container running on mediatemple DV 4.0 package Average total memory usage: <500mb Total memory usage allowed: 1gb (part of shared pool for emergency only, users are only guaranteed 500mb) Processor: 1ghz Main database sizes with most usage: 275mb & 107mb server stack: nginx 1.0.10, mysql 5.1.54, php 5.3.8 with php-fpm innodb_buffer_pool_size=100M php-fpm max children: 5 Webapps: custom php-based sites, magento & drupal slow query timeout is set to 1 second Steps I completed towards diagnosis: Cannot restart container yet - I will try later tonight when our domestic traffic has dropped Enabled mysql and php-fpm slowlog. Found functions that did DB queries in php-fpm slowlog were taking over 1s to complete at times Found some simple queries in mysql slowlog taking well over 1s to complete that should take less than 1s. Most interesting - execution time seems to spike at times. A query will take .2s a couple times, then one time it will take 8s to run the same query. These results were verified by running raw SQL queries through mysql command line. Top does not reveal anything too interesting Only resource related thing i can see is load averages much higher than normal Up until today, mysql has been fine, there have been no major changes to the db since yesterday. Sometimes things are so bad, I am seeing bad gateway errors after 60s of execution time. Innodb is doing on average 300-1400 reads/sec. Mysql is doing 3-10 queries/sec slow query count in 2 hours uptime is 171 (with slow timeout at 1 second) Tried restarting mysql, nginx, php-fpm multiple times For example: UPDATE `catalogsearch_query` SET `query_text` = 'EW 90', `num_results` = '7532', `popularity` = '99180', `redirect` = NULL, `synonym_for` = NULL, `store_id` = '1', `display_in_terms` = '1', `is_active` = '1', `is_processed` = '1', `updated_at` = '2012-05-08 21:38:31' WHERE (query_id='31'); This query took 17sec to complete one time, rest of the time around .079 sec. But varies, sometimes 1sec, sometimes .004 sec. This is running the same query, over and over with a couple seconds time in between each. Most tables are innodb, and sometimes I noticed the lock time taking 90% of the query execution time, but most of the time lock time is insignificant. Any idea what's going on here?

    Read the article

  • PHP SOAP error: Method element needs to belong to the namespace

    - by kdm
    I'm unable to retrieve data from an XML document, any help is greatly appreciated. I'm using PHP 5.2.10 and the WSDL url is an internal link within my company. The following code produces an error. $url = "http://dta-info/IVR/IVRINFO?WSDL"; $params = array("zANI" => "12345"); try{ $client = new SoapClient($url, array( 'trace' => 1, 'connection_timeout' => 2, 'location' => $url ) ); }catch(SoapFault $fault){ echo "faultstring: {$fault->faultstring})\n"; } try{ $result = $client->GetIVRinfo($params); }catch(SoapFault $fault){ echo "(faultcode: {$fault->faultcode}, faultstring: {$fault->faultstring} )\n"; } (faultcode: SOAP-ENV:Client, faultstring: There should be no path or parameters after a SOAP vname. ) So i tried to use a non-wsdl mode but i receive a different error no matter how i try to format the params. $url = "http://dta-info/IVR/IVRINFO"; $params = array("zANI" => "12345"); try{ $client = new SoapClient(null, array( 'trace' => 1, 'connection_timeout' => 2, 'location' => $url, 'uri' => $uri, 'style' => SOAP_DOCUMENT, 'use' => SOAP_LITERAL, 'soap_version' => SOAP_2 ) ); }catch(SoapFault $fault){ echo "faultstring: {$fault->faultstring})\n"; } try{ $result = $client->GetIVRinfo($params); }catch(SoapFault $fault){ echo "(faultcode: {$fault->faultcode}, faultstring: {$fault->faultstring} )\n"; } (faultcode: SOAP-ENV:Client, faultstring: The method element needs to belong to the namespace 'http://GETIVRINFO/IVR/IVRINFO'. ) I have tested this WSDL with a tool called SoapUI and it returns the results with no errors. So it leads me to believe I'm not formatting the vars or headers correctly with PHP. I also tried passing in a xml fragment as the param but that returns the same error. What am i doing wrong?????? $params = '<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ivr="http://GETIVRINFO/IVR/IVRINFO"> <soapenv:Header/> <soapenv:Body> <ivr:GetIVRinfo> <!--Optional:--> <ivr:zANI>12345</ivr:zANI> </ivr:GetIVRinfo> </soapenv:Body> </soapenv:Envelope>'; Here is the WSDL document: <?xml version="1.0"?><wsdl:definitions name="IVR" targetNamespace="http://GETIVRINFO/IVR/IVRINFO" xmlns:tns="http://GETIVRINFO/IVR/IVRINFO" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:sql="http://schemas.microsoft.com/SQLServer/2001/12/SOAP" xmlns:sqltypes="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types" xmlns:sqlmessage="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage" xmlns:sqlresultstream="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlResultStream"> <wsdl:types><xsd:schema targetNamespace='http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types' elementFormDefault='qualified' attributeFormDefault='qualified'> <xsd:import namespace='http://www.w3.org/2001/XMLSchema'/> <xsd:simpleType name='nonNegativeInteger'> <xsd:restriction base='xsd:int'> <xsd:minInclusive value='0'/> </xsd:restriction> </xsd:simpleType> <xsd:attribute name='IsNested' type='xsd:boolean'/> <xsd:complexType name='SqlRowSet'> <xsd:sequence> <xsd:element ref='xsd:schema'/> <xsd:any/> </xsd:sequence> <xsd:attribute ref='sqltypes:IsNested'/> </xsd:complexType> <xsd:complexType name='SqlXml' mixed='true'> <xsd:sequence> <xsd:any/> </xsd:sequence> </xsd:complexType> <xsd:simpleType name='SqlResultCode'> <xsd:restriction base='xsd:int'> <xsd:minInclusive value='0'/> </xsd:restriction> </xsd:simpleType> </xsd:schema> <xsd:schema targetNamespace='http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage' elementFormDefault='qualified' attributeFormDefault='qualified'> <xsd:import namespace='http://www.w3.org/2001/XMLSchema'/> <xsd:import namespace='http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types'/> <xsd:complexType name='SqlMessage'> <xsd:sequence minOccurs='1' maxOccurs='1'> <xsd:element name='Class' type='sqltypes:nonNegativeInteger'/> <xsd:element name='LineNumber' type='sqltypes:nonNegativeInteger'/> <xsd:element name='Message' type='xsd:string'/> <xsd:element name='Number' type='sqltypes:nonNegativeInteger'/> <xsd:element name='Procedure' type='xsd:string'/> <xsd:element name='Server' type='xsd:string'/> <xsd:element name='Source' type='xsd:string'/> <xsd:element name='State' type='sqltypes:nonNegativeInteger'/> </xsd:sequence> <xsd:attribute ref='sqltypes:IsNested'/> </xsd:complexType> </xsd:schema> <xsd:schema targetNamespace='http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlResultStream' elementFormDefault='qualified' attributeFormDefault='qualified'> <xsd:import namespace='http://www.w3.org/2001/XMLSchema'/> <xsd:import namespace='http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types'/> <xsd:import namespace='http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage'/> <xsd:complexType name='SqlResultStream'> <xsd:choice minOccurs='1' maxOccurs='unbounded'> <xsd:element name='SqlRowSet' type='sqltypes:SqlRowSet'/> <xsd:element name='SqlXml' type='sqltypes:SqlXml'/> <xsd:element name='SqlMessage' type='sqlmessage:SqlMessage'/> <xsd:element name='SqlResultCode' type='sqltypes:SqlResultCode'/> </xsd:choice> </xsd:complexType> </xsd:schema> <xsd:schema targetNamespace="http://GETIVRINFO/IVR/IVRINFO" elementFormDefault="qualified" attributeFormDefault="qualified"> <xsd:import namespace="http://www.w3.org/2001/XMLSchema"/> <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types"/> <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage"/> <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlResultStream"/> <xsd:element name="GetIVRinfo"> <xsd:complexType> <xsd:sequence> <xsd:element minOccurs="0" maxOccurs="1" name="zANI" type="xsd:string" nillable="true"/> </xsd:sequence> </xsd:complexType> </xsd:element> <xsd:element name="GetIVRinfoResponse"> <xsd:complexType> <xsd:sequence> <xsd:element minOccurs="1" maxOccurs="1" name="GetIVRinfoResult" type="sqlresultstream:SqlResultStream"/> </xsd:sequence> </xsd:complexType> </xsd:element> </xsd:schema> </wsdl:types> <wsdl:message name="GetIVRinfoIn"> <wsdl:part name="parameters" element="tns:GetIVRinfo"/> </wsdl:message> <wsdl:message name="GetIVRinfoOut"> <wsdl:part name="parameters" element="tns:GetIVRinfoResponse"/> </wsdl:message> <wsdl:portType name="SXSPort"> <wsdl:operation name="GetIVRinfo"> <wsdl:input message="tns:GetIVRinfoIn"/> <wsdl:output message="tns:GetIVRinfoOut"/> </wsdl:operation> </wsdl:portType> <wsdl:binding name="SXSBinding" type="tns:SXSPort"> <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/> <wsdl:operation name="GetIVRinfo"> <soap:operation soapAction="http://GETIVRINFO/IVR/IVRINFO/GetIVRinfo" style="document"/> <wsdl:input> <soap:body use="literal"/> </wsdl:input> <wsdl:output> <soap:body use="literal"/> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:service name="IVR"> <wsdl:port name="SXSPort" binding="tns:SXSBinding"> <soap:address location="http://GETIVRINFO/IVR/IVRINFO"/> </wsdl:port> </wsdl:service> </wsdl:definitions>

    Read the article

  • Yahoo Webmail - Garbled Quote Text

    - by baultista
    I've encountered a very strange problem when trying to reply to e-mail via my Yahoo Web Mail from a family member's computer. She received an e-mail from a client who is using Microsoft Outlook. When I receive the message it looks perfectly fine in my browser and I can read it. However, when I try to reply to the e-mail the quoted text looks as such: > #yiv9181642880 p.yiv9181642880msonormal1114, #yiv9181642880 > li.yiv9181642880msonormal1114, #yiv9181642880 > div.yiv9181642880msonormal1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msoacetate1114, #yiv9181642880 > li.yiv9181642880msoacetate1114, #yiv9181642880 > div.yiv9181642880msoacetate1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880emailquote1114, #yiv9181642880 > li.yiv9181642880emailquote1114, #yiv9181642880 > div.yiv9181642880emailquote1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msochpdefault1114, > #yiv9181642880 li.yiv9181642880msochpdefault1114, > #yiv9181642880 div.yiv9181642880msochpdefault1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msonormal53, #yiv9181642880 > li.yiv9181642880msonormal53, #yiv9181642880 > div.yiv9181642880msonormal53 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} It's the strangest thing. It doesn't happen with all e-mails except this particular one. At a glance it almost looks like raw CSS code that's being displayed, but I really can't understand why. So far I have tried the following: Try a different browser, both IE11 and Google Chrome Check the browser encoding settings Check Yahoo Web Mail's encoding/font settings My only other guess is that the client used some weird font or formatting on the e-mail that is throwing the message body out of sync. Unfortunately for my family member, she is a contractor working with a medium-sized company that refuses to provide her with a domain e-mail address, so she is forced to conduct business this way. Simply asking the sender to use a more widely supported font wouldn't be an acceptable solution here. Any thoughts?

    Read the article

  • Linux router: ping doesn't route back

    - by El Barto
    I have a Debian box which I'm trying to set up as a router and an Ubuntu box which I'm using as a client. My problem is that when the Ubuntu client tries to ping a server on the Internet, all the packets are lost (though, as you can see below, they seem to go to the server and back without problem). I'm doing this in the Ubuntu Box: # ping -I eth1 my.remote-server.com PING my.remote-server.com (X.X.X.X) from 10.1.1.12 eth1: 56(84) bytes of data. ^C --- my.remote-server.com ping statistics --- 13 packets transmitted, 0 received, 100% packet loss, time 12094ms (I changed the name and IP of the remote server for privacy). From the Debian Router I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 7, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 8, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 8, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 9, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 9, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 10, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 10, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 11, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 11, length 64 ^C 9 packets captured 9 packets received by filter 0 packets dropped by kernel # tcpdump -i eth2 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth2, link-type EN10MB (Ethernet), capture size 65535 bytes IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 213, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 213, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 214, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 214, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 215, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 215, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 216, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 216, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 217, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 217, length 64 ^C 10 packets captured 10 packets received by filter 0 packets dropped by kernel And at the remote server I see this: # tcpdump -i eth0 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 1, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 1, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 2, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 2, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 3, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 3, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 4, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 4, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 5, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 5, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 6, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 6, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 7, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 7, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 8, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 8, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 9, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 9, length 64 18 packets captured 228 packets received by filter 92 packets dropped by kernel Here "X.X.X.X" is my remote server's IP and "Y.Y.Y.Y" is my local network's public IP. So, what I understand is that the ping packets are coming out of the Ubuntu box (10.1.1.12), to the router (10.1.1.1), from there to the next router (192.168.1.1) and reaching the remote server (X.X.X.X). Then they come back all the way to the Debian router, but they never reach the Ubuntu box back. What am I missing? Here's the Debian router setup: # ifconfig eth1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:105761 errors:0 dropped:0 overruns:0 frame:0 TX packets:48944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:40298768 (38.4 MiB) TX bytes:44831595 (42.7 MiB) Interrupt:19 Base address:0x6000 eth2 Link encap:Ethernet HWaddr 6c:f0:49:a4:47:38 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fea4:4738/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38335992 errors:0 dropped:0 overruns:0 frame:0 TX packets:37097705 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:4260680226 (3.9 GiB) TX bytes:3759806551 (3.5 GiB) Interrupt:27 eth3 Link encap:Ethernet HWaddr 94:0c:6d:82:c8:72 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3408 errors:0 dropped:0 overruns:0 frame:0 TX packets:3408 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:358445 (350.0 KiB) TX bytes:358445 (350.0 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:2767779 errors:0 dropped:0 overruns:0 frame:0 TX packets:1569477 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3609469393 (3.3 GiB) TX bytes:96113978 (91.6 MiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth2 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Ubuntu box (on 10.1.1.12 and 192.168.1.12) Address HWtype HWaddress Flags Mask Iface 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.102 ether NN:NN:NN:NN:NN:NN C eth2 10.1.1.12 ether 00:1e:67:15:2b:f0 C eth1 192.168.1.86 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.2 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.40 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.12 ether 00:1e:67:15:2b:f1 C eth2 192.168.1.77 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.41 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.123 ether NN:NN:NN:NN:NN:NN C eth2 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 10.1.1.0/24 !10.1.1.0/24 MASQUERADE all -- !10.1.1.0/24 10.1.1.0/24 Chain OUTPUT (policy ACCEPT) target prot opt source destination And here's the Ubuntu box: # ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f1 inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28785139 errors:0 dropped:0 overruns:0 frame:0 TX packets:19050735 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32068182803 (32.0 GB) TX bytes:6061333280 (6.0 GB) Interrupt:16 Memory:b1a00000-b1a20000 eth1 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f0 inet addr:10.1.1.12 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:285086 errors:0 dropped:0 overruns:0 frame:0 TX packets:12719 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30817249 (30.8 MB) TX bytes:2153228 (2.1 MB) Interrupt:16 Memory:b1900000-b1920000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:86048 errors:0 dropped:0 overruns:0 frame:0 TX packets:86048 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11426538 (11.4 MB) TX bytes:11426538 (11.4 MB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.1.1 0.0.0.0 UG 100 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.8.0.0 192.168.1.10 255.255.255.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Debian box (on 10.1.1.1 and 192.168.1.10) Address HWtype HWaddress Flags Mask Iface 192.168.1.70 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.97 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.103 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.13 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.120 (incomplete) eth0 192.168.1.111 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.51 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.102 (incomplete) eth0 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.74 (incomplete) eth0 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.121 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.71 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.88 (incomplete) eth0 192.168.1.82 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.98 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.73 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.11 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.85 (incomplete) eth0 192.168.1.112 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.81 ether NN:NN:NN:NN:NN:NN C eth0 10.1.1.1 ether 94:0c:6d:82:0d:98 C eth1 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.10 ether 6c:f0:49:a4:47:38 C eth0 192.168.1.86 (incomplete) eth0 192.168.1.119 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth1 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth0 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination Edit: Following Patrick's suggestion, I did a tcpdump con the Ubuntu box and I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 1, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 1, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 2, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 2, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 3, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 3, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 4, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 4, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 5, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 5, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 6, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 6, length 64 ^C 12 packets captured 12 packets received by filter 0 packets dropped by kernel So the question is: if all packets seem to be coming and going, why does ping report 100% packet loss?

    Read the article

  • Linux RAID-0 performance doesn't scale up over 1 GB/s

    - by wazoox
    I have trouble getting the max throughput out of my setup. The hardware is as follow : dual Quad-Core AMD Opteron(tm) Processor 2376 16 GB DDR2 ECC RAM dual Adaptec 52245 RAID controllers 48 1 TB SATA drives set up as 2 RAID-6 arrays (256KB stripe) + spares. Software : Plain vanilla 2.6.32.25 kernel, compiled for AMD-64, optimized for NUMA; Debian Lenny userland. benchmarks run : disktest, bonnie++, dd, etc. All give the same results. No discrepancy here. io scheduler used : noop. Yeah, no trick here. Up until now I basically assumed that striping (RAID 0) several physical devices should augment performance roughly linearly. However this is not the case here : each RAID array achieves about 780 MB/s write, sustained, and 1 GB/s read, sustained. writing to both RAID arrays simultaneously with two different processes gives 750 + 750 MB/s, and reading from both gives 1 + 1 GB/s. however when I stripe both arrays together, using either mdadm or lvm, the performance is about 850 MB/s writing and 1.4 GB/s reading. at least 30% less than expected! running two parallel writer or reader processes against the striped arrays doesn't enhance the figures, in fact it degrades performance even further. So what's happening here? Basically I ruled out bus or memory contention, because when I run dd on both drives simultaneously, aggregate write speed actually reach 1.5 GB/s and reading speed tops 2 GB/s. So it's not the PCIe bus. I suppose it's not the RAM. It's not the filesystem, because I get exactly the same numbers benchmarking against the raw device or using XFS. And I also get exactly the same performance using either LVM striping and md striping. What's wrong? What's preventing a process from going up to the max possible throughput? Is Linux striping defective? What other tests could I run?

    Read the article

  • Reading Data from DDFS ValueError: No JSON object could be decoded

    - by secumind
    I'm running dozens of map reduce jobs for a number of different purposes using disco. My data has grown enormous and I thought I would try using DDFS for a change rather than standard txt files. I've followed the DISCO map/reduce example Counting Words as a map/reduce job, without to much difficulty and with the help of others, Reading JSON specific data into DISCO I've gotten past one of my latest problems. I'm trying to read data in/out of ddfs to better chunk and distribute it but am having a bit of trouble. Here's an example file: file.txt {"favorited": false, "in_reply_to_user_id": null, "contributors": null, "truncated": false, "text": "I'll call him back tomorrow I guess", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": null, "entities": {"user_mentions": [], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016843603968", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/305726905/FASHION-3.png", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1818996723/image_normal.jpg", "profile_sidebar_fill_color": "292727", "is_translator": false, "id": 113532729, "profile_text_color": "000000", "followers_count": 78, "protected": false, "location": "With My Niggas In Paris!", "default_profile_image": false, "listed_count": 0, "utc_offset": -21600, "statuses_count": 6733, "description": "Made in CHINA., Educated && Making My Own $$. Fear GOD && Put Him 1st. #TeamFollowBack #TeamiPhone\n", "friends_count": 74, "profile_link_color": "b03f3f", "profile_image_url": "http://a2.twimg.com/profile_images/1818996723/image_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "1f9199", "id_str": "113532729", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/305726905/FASHION-3.png", "name": "Bee'Jay", "lang": "en", "profile_background_tile": true, "favourites_count": 19, "screen_name": "OohMyBEEsNice", "url": "http://www.bitchimpaid.org", "created_at": "Fri Feb 12 03:32:54 +0000 2010", "contributors_enabled": false, "time_zone": "Central Time (US & Canada)", "profile_sidebar_border_color": "000000", "default_profile": false, "following": null}, "in_reply_to_screen_name": null, "retweet_count": 0, "geo": null, "id": 168931016843603968, "source": "<a href=\"http://twitter.com/#!/download/iphone\" rel=\"nofollow\">Twitter for iPhone</a>"} {"favorited": false, "in_reply_to_user_id": 50940453, "contributors": null, "truncated": false, "text": "@LegaMrvica @MimozaBand makasi om artis :D kadoo kadoo", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": "168653037894770688", "coordinates": null, "in_reply_to_user_id_str": "50940453", "entities": {"user_mentions": [{"indices": [0, 11], "screen_name": "LegaMrvica", "id": 50940453, "name": "Lega_thePianis", "id_str": "50940453"}, {"indices": [12, 23], "screen_name": "MimozaBand", "id": 375128905, "name": "Mimoza", "id_str": "375128905"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": 168653037894770688, "id_str": "168931016868761600", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "profile_sidebar_fill_color": "DDFFCC", "is_translator": false, "id": 48293450, "profile_text_color": "333333", "followers_count": 182, "protected": false, "location": "\u00dcT: -6.906799,107.622383", "default_profile_image": false, "listed_count": 0, "utc_offset": -28800, "statuses_count": 3052, "description": "Fashion design maranatha '11 // traditional dancer (bali) at sanggar tampak siring & Natya Nataraja", "friends_count": 206, "profile_link_color": "0084B4", "profile_image_url": "http://a3.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "9AE4E8", "id_str": "48293450", "profile_background_image_url": "http://a0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "name": "nana afiff", "lang": "en", "profile_background_tile": true, "favourites_count": 2, "screen_name": "hasnfebria", "url": null, "created_at": "Thu Jun 18 08:50:29 +0000 2009", "contributors_enabled": false, "time_zone": "Pacific Time (US & Canada)", "profile_sidebar_border_color": "BDDCAD", "default_profile": false, "following": null}, "in_reply_to_screen_name": "LegaMrvica", "retweet_count": 0, "geo": null, "id": 168931016868761600, "source": "<a href=\"http://blackberry.com/twitter\" rel=\"nofollow\">Twitter for BlackBerry\u00ae</a>"} {"favorited": false, "in_reply_to_user_id": 27260086, "contributors": null, "truncated": false, "text": "@justinbieber u were born to be somebody, and u're super important in beliebers' life. thanks for all biebs. I love u. follow me? 84", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": "27260086", "entities": {"user_mentions": [{"indices": [0, 13], "screen_name": "justinbieber", "id": 27260086, "name": "Justin Bieber", "id_str": "27260086"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016856178688", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/416005864/Captura.JPG", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "profile_sidebar_fill_color": "f5e7f3", "is_translator": false, "id": 406750700, "profile_text_color": "333333", "followers_count": 1122, "protected": false, "location": "Adentro de una supra.", "default_profile_image": false, "listed_count": 0, "utc_offset": -14400, "statuses_count": 20966, "description": "Mi \u00eddolo es @justinbieber , si te gusta \u00a1genial!, si no, solo respetalo. El cambi\u00f3 mi vida completamente y mi sue\u00f1o es conocerlo #TrueBelieber . ", "friends_count": 1015, "profile_link_color": "9404b8", "profile_image_url": "http://a1.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "notifications": null, "show_all_inline_media": false, "geo_enabled": false, "profile_background_color": "f9fcfa", "id_str": "406750700", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/416005864/Captura.JPG", "name": "neversaynever,right?", "lang": "es", "profile_background_tile": false, "favourites_count": 22, "screen_name": "True_Belieebers", "url": "http://www.wehavebieber-fever.tumblr.com", "created_at": "Mon Nov 07 04:17:40 +0000 2011", "contributors_enabled": false, "time_zone": "Santiago", "profile_sidebar_border_color": "C0DEED", "default_profile": false, "following": null}, "in_reply_to_screen_name": "justinbieber", "retweet_count": 0, "geo": null, "id": 168931016856178688, "source": "<a href=\"http://yfrog.com\" rel=\"nofollow\">Yfrog</a>"} I load it into DDFS with: # ddfs chunk data:test1 ./file.txt created: disco://localhost/ddfs/vol0/blob/44/file_txt-0$549-db27b-125e1 I test that the file is indeed loaded into ddfs with: # ddfs xcat data:test1 {"favorited": false, "in_reply_to_user_id": null, "contributors": null, "truncated": false, "text": "I'll call him back tomorrow I guess", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": null, "entities": {"user_mentions": [], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016843603968", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/305726905/FASHION-3.png", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1818996723/image_normal.jpg", "profile_sidebar_fill_color": "292727", "is_translator": false, "id": 113532729, "profile_text_color": "000000", "followers_count": 78, "protected": false, "location": "With My Niggas In Paris!", "default_profile_image": false, "listed_count": 0, "utc_offset": -21600, "statuses_count": 6733, "description": "Made in CHINA., Educated && Making My Own $$. Fear GOD && Put Him 1st. #TeamFollowBack #TeamiPhone\n", "friends_count": 74, "profile_link_color": "b03f3f", "profile_image_url": "http://a2.twimg.com/profile_images/1818996723/image_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "1f9199", "id_str": "113532729", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/305726905/FASHION-3.png", "name": "Bee'Jay", "lang": "en", "profile_background_tile": true, "favourites_count": 19, "screen_name": "OohMyBEEsNice", "url": "http://www.bitchimpaid.org", "created_at": "Fri Feb 12 03:32:54 +0000 2010", "contributors_enabled": false, "time_zone": "Central Time (US & Canada)", "profile_sidebar_border_color": "000000", "default_profile": false, "following": null}, "in_reply_to_screen_name": null, "retweet_count": 0, "geo": null, "id": 168931016843603968, "source": "<a href=\"http://twitter.com/#!/download/iphone\" rel=\"nofollow\">Twitter for iPhone</a>"} {"favorited": false, "in_reply_to_user_id": 50940453, "contributors": null, "truncated": false, "text": "@LegaMrvica @MimozaBand makasi om artis :D kadoo kadoo", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": "168653037894770688", "coordinates": null, "in_reply_to_user_id_str": "50940453", "entities": {"user_mentions": [{"indices": [0, 11], "screen_name": "LegaMrvica", "id": 50940453, "name": "Lega_thePianis", "id_str": "50940453"}, {"indices": [12, 23], "screen_name": "MimozaBand", "id": 375128905, "name": "Mimoza", "id_str": "375128905"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": 168653037894770688, "id_str": "168931016868761600", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "profile_sidebar_fill_color": "DDFFCC", "is_translator": false, "id": 48293450, "profile_text_color": "333333", "followers_count": 182, "protected": false, "location": "\u00dcT: -6.906799,107.622383", "default_profile_image": false, "listed_count": 0, "utc_offset": -28800, "statuses_count": 3052, "description": "Fashion design maranatha '11 // traditional dancer (bali) at sanggar tampak siring & Natya Nataraja", "friends_count": 206, "profile_link_color": "0084B4", "profile_image_url": "http://a3.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "9AE4E8", "id_str": "48293450", "profile_background_image_url": "http://a0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "name": "nana afiff", "lang": "en", "profile_background_tile": true, "favourites_count": 2, "screen_name": "hasnfebria", "url": null, "created_at": "Thu Jun 18 08:50:29 +0000 2009", "contributors_enabled": false, "time_zone": "Pacific Time (US & Canada)", "profile_sidebar_border_color": "BDDCAD", "default_profile": false, "following": null}, "in_reply_to_screen_name": "LegaMrvica", "retweet_count": 0, "geo": null, "id": 168931016868761600, "source": "<a href=\"http://blackberry.com/twitter\" rel=\"nofollow\">Twitter for BlackBerry\u00ae</a>"} {"favorited": false, "in_reply_to_user_id": 27260086, "contributors": null, "truncated": false, "text": "@justinbieber u were born to be somebody, and u're super important in beliebers' life. thanks for all biebs. I love u. follow me? 84", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": "27260086", "entities": {"user_mentions": [{"indices": [0, 13], "screen_name": "justinbieber", "id": 27260086, "name": "Justin Bieber", "id_str": "27260086"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016856178688", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/416005864/Captura.JPG", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "profile_sidebar_fill_color": "f5e7f3", "is_translator": false, "id": 406750700, "profile_text_color": "333333", "followers_count": 1122, "protected": false, "location": "Adentro de una supra.", "default_profile_image": false, "listed_count": 0, "utc_offset": -14400, "statuses_count": 20966, "description": "Mi \u00eddolo es @justinbieber , si te gusta \u00a1genial!, si no, solo respetalo. El cambi\u00f3 mi vida completamente y mi sue\u00f1o es conocerlo #TrueBelieber . ", "friends_count": 1015, "profile_link_color": "9404b8", "profile_image_url": "http://a1.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "notifications": null, "show_all_inline_media": false, "geo_enabled": false, "profile_background_color": "f9fcfa", "id_str": "406750700", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/416005864/Captura.JPG", "name": "neversaynever,right?", "lang": "es", "profile_background_tile": false, "favourites_count": 22, "screen_name": "True_Belieebers", "url": "http://www.wehavebieber-fever.tumblr.com", "created_at": "Mon Nov 07 04:17:40 +0000 2011", "contributors_enabled": false, "time_zone": "Santiago", "profile_sidebar_border_color": "C0DEED", "default_profile": false, "following": null}, "in_reply_to_screen_name": "justinbieber", "retweet_count": 0, "geo": null, "id": 168931016856178688, "source": "<a href=\"http://yfrog.com\" rel=\"nofollow\">Yfrog</a> At this point everything is great, I load up the script that resulted from a previous Stack Post: from disco.core import Job, result_iterator import gzip def map(line, params): import unicodedata import json r = json.loads(line).get('text') s = unicodedata.normalize('NFD', r).encode('ascii', 'ignore') for word in s.split(): yield word, 1 def reduce(iter, params): from disco.util import kvgroup for word, counts in kvgroup(sorted(iter)): yield word, sum(counts) if __name__ == '__main__': job = Job().run(input=["tag://data:test1"], map=map, reduce=reduce) for word, count in result_iterator(job.wait(show=True)): print word, count NOTE: That this script runs file if the input=["file.txt"], however when I run it with "tag://data:test1" I get the following error: # DISCO_EVENTS=1 python count_normal_words.py Job@549:db30e:25bd8: Status: [map] 0 waiting, 1 running, 0 done, 0 failed 2012/11/25 21:43:26 master New job initialized! 2012/11/25 21:43:26 master Starting job 2012/11/25 21:43:26 master Starting map phase 2012/11/25 21:43:26 master map:0 assigned to solice 2012/11/25 21:43:26 master ERROR: Job failed: Worker at 'solice' died: Traceback (most recent call last): File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/__init__.py", line 329, in main job.worker.start(task, job, **jobargs) File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/__init__.py", line 290, in start self.run(task, job, **jobargs) File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/classic/worker.py", line 286, in run getattr(self, task.mode)(task, params) File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/classic/worker.py", line 299, in map for key, val in self['map'](entry, params): File "count_normal_words.py", line 12, in map File "/usr/lib64/python2.7/json/__init__.py", line 326, in loads return _default_decoder.decode(s) File "/usr/lib64/python2.7/json/decoder.py", line 366, in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) File "/usr/lib64/python2.7/json/decoder.py", line 384, in raw_decode raise ValueError("No JSON object could be decoded") ValueError: No JSON object could be decoded 2012/11/25 21:43:26 master WARN: Job killed Status: [map] 1 waiting, 0 running, 0 done, 1 failed Traceback (most recent call last): File "count_normal_words.py", line 28, in <module> for word, count in result_iterator(job.wait(show=True)): File "/usr/local/lib/python2.7/site-packages/disco/core.py", line 348, in wait timeout, poll_interval * 1000) File "/usr/local/lib/python2.7/site-packages/disco/core.py", line 309, in check_results raise JobError(Job(name=jobname, master=self), "Status %s" % status) disco.error.JobError: Job Job@549:db30e:25bd8 failed: Status dead The Error states: ValueError: No JSON object could be decoded. Again, this works fine using the text file as input but now DDFS. Any ideas, I'm open to suggestions?

    Read the article

  • Gigabyte GA-970A-UD3 mobo won't boot from USB flash drive

    - by user38586
    I am trying to boot BAMT a Debian flavor via USB on a brand new Gigabyte GA-970A-UD3 motherboard. I tried various flash drive and various OS. I never had this problem with ASUS and MSI. The problem is from Gigabyte hardware. I found that my BIOS is very strict about MBR compatibility. Now I can boot in DOS mode. The flash drive need to be formated as a Win98 Startup disk using HP USB disk storage format tool. Unetbootin menu is booting from USB but won't install BAMT. If I use Windows or Linux diskimager the working MBR is deleted. I tried converting BAMT .img to .iso and it is not booting with Unetbootin. Is it possible to boot BAMT(Debian Linux) from a Win98 DOS command prompt? Maybe there is a way to burn the image and keep the working MBR? If the working MBR is deleted, the flash drive is not recognized at all by the BIOS. This is the info I found that got me booting for the first time in DOS: GB's BIOS will only boot USBs formatted to FAT-32, conforming to normal MBR bootloader. I've seen this before, and surmised that the 'stick-maker' was formatting in ReiserFile, or one of the EXT 'flavors', but no one ever followed up to confirm or deny... Also, if it's putting the bootloader into its own partition - won't work! In the BIOS, on the "Integrated Peripherals" page, the "USB Storage Function" item must be enabled (which should be the default) to allow USB booting... I've put a little work into a 'GB USB booting tutorial', and frankly, I'd just go ahead and finish it up for you, but I really don't want to reboot the several times it will take me to 'firm up' procedural details, and take the BIOS/boot pictures for the post - just noticed VAIL finally went 'public beta', so will be downloading for likely twenty-six hours or so There's likely enough there to test a 'raw DOS boot', just to see if your hardware (especially the USB stick itself) will do it... Some post later: Fixed. Here is a brief summary. Since my ubuntu live usb sticks (2gb kingston and 8gb sandisk sd/usb reader - fat32, created in ubuntu 10.04) would not boot this board even though they would boot my ga-ep45-ud3p, I decided to try bilbat's suggestion with the HP usb boot program. I created the win98 boot disk on the kingston 2gb stick without reformatting. It booted right up. Next, I used windows version of unetbootin to write the ubuntu live cd to the kingston disk. This fired right up and completed the install. Everything seems to be in good order now. Unfortunately I can boot in DOS mode but can't boot BAMT.

    Read the article

  • Restore single users Exchange 2003 mailbox from backup

    - by Campo
    I take weekly backups of exchange in full. I also take complete weekly backups of the entire server. It is a Server 2003 R2 with AD and Exchange 2003 all on one box. One users inbox has disappeared. She has 19000+ junk items now. It is possible the inbox got mixed into the junk. Regardless it is such a huge mess she is not going to go through all of that.... I want to restore he mailbox from the backup. I followed this MS KB http://support.microsoft.com/kb/823176 I had to use Method 3. I have a VM of Server 2003 R2 with exchange but I am having failures on the restore from NT backup. The backup log just states to check the application log.... Application log points to backup log... Only info Is failed to restore Only thing different is the computer name... The only error I can find is in the Application log. Information Store Database not found All others just say that the backup failed. Any assistance is greatly appreciated. UPDATE I have successfully proven I can restore the DB into a recovery storage group in my VM Unfortunately due to the actual account being on a different store I am unable to do the recovery... Error is The attempt to log on to the Microsoft Exchange Server computer has failed. The MAPI provider failed. Microsoft Exchange Server Information Store ID no: 8004011d-0512-00000000 Two questions QUESTION 1 Should I repeat my steps on the production exchange server in the recover storage group? then merge into her original account? I am just concerned with doing recovery like that on the live server.... QUESTION 2 Is there any way I can extract her .PST from my recovery VM and then import into her outlook? On the Recovery VM: I restored the raw DB from my full backup repaired it with ESEUTIL then mounted in the recovery store. Was thinking I could just repeat and mount in the main store on the VM? Thanks for the suggestions.

    Read the article

  • Vagrant-aws not provisioning

    - by SuperCabbage
    I'm trying to spin up and provision an EC2 instance with Vagrant, it successfully creates the instance up and I can then use vagrant ssh to SSH into the it but Puppet doesn't seem to carry out any provisioning. Upon running vagrant up --provider=aws --provision I get the following output Bringing machine 'default' up with 'aws' provider... WARNING: Nokogiri was built against LibXML version 2.8.0, but has dynamically loaded 2.9.1 [default] Warning! The AWS provider doesn't support any of the Vagrant high-level network configurations (`config.vm.network`). They will be silently ignored. [default] Launching an instance with the following settings... [default] -- Type: m1.small [default] -- AMI: ami-a73264ce [default] -- Region: us-east-1 [default] -- Keypair: banderton [default] -- Block Device Mapping: [] [default] -- Terminate On Shutdown: false [default] Waiting for SSH to become available... [default] Machine is booted and ready for use! [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/ => /vagrant [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/manifests/ => /tmp/vagrant-puppet/manifests [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/modules/ => /tmp/vagrant-puppet/modules-0 [default] Running provisioner: puppet... An error occurred while executing multiple actions in parallel. Any errors that occurred are shown below. An error occurred while executing the action on the 'default' machine. Please handle this error then try again: No error message I can then SSH into the instance by using vagrant ssh but none of my provisioning has taken place, so I'm assuming that errors have occured but I'm not being given any useful information relating to them. My Vagrantfile is as following; Vagrant.configure("2") do |config| config.vm.box = "ubuntu_aws" config.vm.box_url = "https://github.com/mitchellh/vagrant-aws/raw/master/dummy.box" config.vm.provider :aws do |aws, override| aws.access_key_id = "REDACTED" aws.secret_access_key = "REDACTED" aws.keypair_name = "banderton" override.ssh.private_key_path = "~/.ssh/banderton.pem" override.ssh.username = "ubuntu" aws.ami = "ami-a73264ce" end config.vm.provision :puppet do |puppet| puppet.manifests_path = "manifests" puppet.module_path = "modules" puppet.options = ['--verbose'] end end My Puppet manifest is as following; package { [ 'build-essential', 'vim', 'curl', 'git-core', 'nano', 'freetds-bin' ]: ensure => 'installed', } None of the packages are installed.

    Read the article

  • Why would a WebService return nulls when the actual service returns data?

    - by Jerry
    I have a webservice (out of my control) that I have to talk to. I also have a packet-sniffer on the line, and (SURPRISE!!!) the developers of the webservice aren't lying. They are actually sending back all of the data that I requested. But the web-service code that is auto-generated from the WSDL file is giving me "null" as a value. I used their WSDL file to generate my Web Reference. I checked my data types with the datatypes that the WSDL file has declared. And I used the code as listed below to perform the calls: DT_MaterialMaster_LookupRequest req = new DT_MaterialMaster_LookupRequest(); req.MaterialNumber = "101*"; req.DocumentNo = ""; req.Description = "Pipe*"; req.Plant = "0000"; MI_MaterialMaster_Lookup_OBService srv = new MI_MaterialMaster_Lookup_OBService(); DT_MaterialMaster_Response resp = srv.MI_MaterialMaster_Lookup_OB(new DT_MaterialMaster_LookupRequest[] { req }); // Note that the response here is ALWAYS null!! Console.WriteLine(resp.Status); The resp object is an actual object. It was generated properly. However, the Status and MaterialData fields are always null. When I call the web service, I've placed a packet-sniffer on the line, and I can see that I've sent the following (linebreaks and indentions for my own sanity): <?xml version="1.0" encoding="utf-8"?> <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <soap:Body> <MT_MaterialMaster_Lookup xmlns="http://MyCompany.com/SomeCompany/mm/MaterialMasterSearch"> <Request xmlns=""> <MaterialNumber>101*</MaterialNumber> <Description>Pipe*</Description> <DocumentNo /> <Plant>0000</Plant> </Request> </MT_MaterialMaster_Lookup> </soap:Body> </soap:Envelope> The response that they send back SEEMS to be a valid response (linebreaks and indentions for my own sanity): <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'> <SOAP:Header /> <SOAP:Body> <n0:MT_MaterialMaster_Response xmlns:n0='http://MyCompany.com/SomeCompany/mm/MaterialMasterSearch' xmlns:prx='urn:SomeCompany.com:proxy:BRD:/1SAI/TAS4FE14A2DE960D61219AE:701:2009/02/10'> <Response> <Status>No Rows Found</Status> <MaterialData /> </Response> </n0:MT_MaterialMaster_Response> </SOAP:Body> </SOAP:Envelope> The status shows that it actually received data... but the resp.Status and resp.MaterialData fields are always null. What have I done wrong? UPDATE: The WSDL file is defined as: <?xml version="1.0" encoding="utf-8"?> <wsdl:definitions xmlns:p1="http://MyCompany.com/SomeCompany/mm/MaterialMasterSearch" name="MI_MaterialMaster_Lookup_AutoCAD_OB" targetNamespace="http://MyCompany.com/SomeCompany/mm/MaterialMasterSearch" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"> <wsdl:types> <xsd:schema xmlns="http://MyCompany.com/SomeCompany/mm/MaterialMasterSearch" targetNamespace="http://MyCompany.com/SomeCompany/mm/MaterialMasterSearch" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <xsd:element name="MT_MaterialMaster_Response" type="p1:DT_MaterialMaster_Response" /> <xsd:element name="MT_MaterialMaster_Lookup" type="p1:DT_MaterialMaster_Lookup" /> <xsd:complexType name="DT_MaterialMaster_Response"> <xsd:sequence> <xsd:element name="Status" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">d48d03b040af11df99e300145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> <xsd:element maxOccurs="unbounded" name="MaterialData"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">64908aa040a511df843700145eccb24e</xsd:appinfo> </xsd:annotation> <xsd:complexType> <xsd:sequence> <xsd:element name="MaterialNumber" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">64908aa140a511df848500145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> <xsd:element minOccurs="0" name="Description" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">64908aa240a511df95bf00145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> <xsd:element minOccurs="0" name="DocumentNo" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">64908aa340a511dfb23700145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> <xsd:element minOccurs="0" name="UOM" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">3b5f14c040a611df9fbe00145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> <xsd:element minOccurs="0" name="Hierarchy" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">64908aa440a511dfc65b00145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> <xsd:element minOccurs="0" name="Plant" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">d48d03b140af11dfb78e00145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> <xsd:element minOccurs="0" name="Procurement" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">d48d03b240af11dfb87b00145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> </xsd:sequence> </xsd:complexType> </xsd:element> </xsd:sequence> </xsd:complexType> <xsd:complexType name="DT_MaterialMaster_Lookup"> <xsd:sequence> <xsd:element maxOccurs="unbounded" name="Request"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">64908aa040a511df843700145eccb24e</xsd:appinfo> </xsd:annotation> <xsd:complexType> <xsd:sequence> <xsd:element minOccurs="0" name="MaterialNumber" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">64908aa140a511df848500145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> <xsd:element minOccurs="0" name="Description" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">64908aa240a511df95bf00145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> <xsd:element minOccurs="0" name="DocumentNo" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">64908aa340a511dfb23700145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> <xsd:element minOccurs="0" name="Plant" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://SomeCompany.com/xi/TextID">64908aa440a511dfc65b00145eccb24e</xsd:appinfo> </xsd:annotation> </xsd:element> </xsd:sequence> </xsd:complexType> </xsd:element> </xsd:sequence> </xsd:complexType> </xsd:schema> </wsdl:types> <wsdl:message name="MT_MaterialMaster_Lookup"> <wsdl:part name="MT_MaterialMaster_Lookup" element="p1:MT_MaterialMaster_Lookup" /> </wsdl:message> <wsdl:message name="MT_MaterialMaster_Response"> <wsdl:part name="MT_MaterialMaster_Response" element="p1:MT_MaterialMaster_Response" /> </wsdl:message> <wsdl:portType name="MI_MaterialMaster_Lookup_AutoCAD_OB"> <wsdl:operation name="MI_MaterialMaster_Lookup_AutoCAD_OB"> <wsdl:input message="p1:MT_MaterialMaster_Lookup" /> <wsdl:output message="p1:MT_MaterialMaster_Response" /> </wsdl:operation> </wsdl:portType> <wsdl:binding name="MI_MaterialMaster_Lookup_AutoCAD_OBBinding" type="p1:MI_MaterialMaster_Lookup_AutoCAD_OB"> <binding transport="http://schemas.xmlsoap.org/soap/http" xmlns="http://schemas.xmlsoap.org/wsdl/soap/" /> <wsdl:operation name="MI_MaterialMaster_Lookup_AutoCAD_OB"> <operation soapAction="http://SomeCompany.com/xi/WebService/soap1.1" xmlns="http://schemas.xmlsoap.org/wsdl/soap/" /> <wsdl:input> <body use="literal" xmlns="http://schemas.xmlsoap.org/wsdl/soap/" /> </wsdl:input> <wsdl:output> <body use="literal" xmlns="http://schemas.xmlsoap.org/wsdl/soap/" /> </wsdl:output> </wsdl:operation> </wsdl:binding> <wsdl:service name="MI_MaterialMaster_Lookup_AutoCAD_OBService"> <wsdl:port name="MI_MaterialMaster_Lookup_AutoCAD_OBPort" binding="p1:MI_MaterialMaster_Lookup_AutoCAD_OBBinding"> <address location="http://bxdwas.MyCompany.com/XISOAPAdapter/MessageServlet?channel=:AutoCAD:SOAP_SND_Material_Lookup" xmlns="http://schemas.xmlsoap.org/wsdl/soap/" /> </wsdl:port> </wsdl:service> </wsdl:definitions>

    Read the article

  • Why can't HTC Droid running OTA 2.1 communicate with RFCOMM?

    - by Brad Hein
    Yesterday we received OTA Android 2.1 on my wife's HTC Droid - HOORAY!!! I am finally able to load my carputer app on her phone. Well we loaded it, but it doesn't work. Specifically, it connects but sees no I/O!!! I paired, re-paired, and re-paired again, every time its the same problem: connect() says we connected successfully, but any attempt to send or receive data appears to work but no data ever arrives in the input buffer. The device I'm connecting to uses AT commands. ATI should respond with a device ID. That works fine when I run the app on my Moto Droid, but on the HTC droid, no data is ever present in the inputstream/buffer. Personally, I'm feeling pretty sure it's a bug or limitation in this release for the HTC (because the app works great on my Moto A855 Droid). Can anybody comment on the issue? Obligatory code snippets: Member variable defining my RFCOMM UUID static final UUID UUID_RFCOMM_GENERIC = UUID.fromString("00001101-0000-1000-8000-00805F9B34FB"); Parts of my connect() // make sure peer is defined as a valid device based on their MAC. If not then do it. if (mBTDevice == null) mBTDevice = mBTAdapter.getRemoteDevice(mPeerMAC); // Make an RFCOMM binding. try {mBTSocket = mBTDevice.createRfcommSocketToServiceRecord(UUID_RFCOMM_GENERIC); } catch (Exception e1) { msg ("connect(): Failed to bind to RFCOMM by UUID. msg=" + e1.getMessage()); return false; } msg ("connect(): Try to connect."); try { mBTSocket.connect(); } catch (Exception e) { msg ("connect(): Exception thrown during connect: " + e.getMessage()); return false; // there was a problem connecting... make a note of the particulars and move on. } msg ("connect(): CONNECTED!"); try { mBTOutputStream = mBTSocket.getOutputStream(); mBTInputStream = new BufferedInputStream (mBTSocket.getInputStream(),INPUT_BUFFER_SIZE); //msg ("Connecting non-buffered input stream..."); //mBTInputStream = mBTSocket.getInputStream(); } catch (Exception e) { msg ("connect(): Error attaching i/o streams to socket. msg=" + e.getMessage()); return false; } resetErrorCounters(); setConnected(true); return true; } Then I send "ATI\r" and expect something like "CAN OBD II" but I get nothing. mBTInputStream.available(), it seems, is ALWAYS zero, even when data should be in the input buffer. There are GOBS of trace messages being generated by the OS as viewed with adb logcat -v time Some of the more interesting ones: 05-17 19:44:21.447 D/BluetoothSppPort( 5809): connected to device service! 05-17 19:44:21.447 D/BluetoothSppPort( 5809): Creating a BluetoothSpp proxy object 05-17 19:44:21.467 D/BluetoothSppService( 74): createPort called! 05-17 19:44:21.467 D/BluetoothSppService( 74): createPort checking uuid 05-17 19:44:21.467 D/BluetoothSppService( 74): createPort UUID=00001101-0000-1000-8000-00805f9b34fb auth=true encrypt=true 05-17 19:44:21.467 D/BluetoothSppService( 74): createPort enforcing bluetooth perm 05-17 19:44:21.467 D/BluetoothSppService( 74): createPort creating a jbtlspp object 05-17 19:44:21.467 D/BluetoothSppService( 74): createPort checking if the btl spp object is valid 05-17 19:44:21.467 D/BluetoothSppService( 74): createPort try to create an spp container 05-17 19:44:21.467 D/BluetoothSppService( 74): createPort try to create security params 05-17 19:44:21.467 D/BluetoothSppService( 74): createPort Set Security L2 05-17 19:44:21.467 D/BluetoothSppService( 74): createPort spp port create 05-17 19:44:21.467 D/JBtlSpp ( 74): create: Entered 05-17 19:44:21.467 D/JBtlSpp ( 74): Calling NativeJBtlSpp_Create 05-17 19:44:21.467 D/JBtlSppNative( 74): NativeJBtlSpp_Create: Entered 05-17 19:44:21.467 D/JBtlSppNative( 74): NativeJBtlSpp_Create: Calling BTL_SPP_Remote_Create 05-17 19:44:21.477 D/JBtlSppNative( 74): NativeJBtlSpp_Create: BTL_SPP_Remote_Create returned 0, context:18 05-17 19:44:21.477 D/JBtlSppNative( 74): NativeJBtlSpp_Create: Setting context value in jContext out parm 05-17 19:44:21.477 D/JBtlSppNative( 74): NativeJBtlSpp_Create: Calling Java setValue(0x18) in context's class 05-17 19:44:21.477 D/JBtlProfileContext( 74): setValue: setValue called, value:24 05-17 19:44:21.477 D/JBtlSppNative( 74): create_spp_port_data: will use context struct 0 for the port 24 05-17 19:44:21.477 D/JBtlSppNative( 74): create_spp_port_data: spp port context 0 added 05-17 19:44:21.477 D/JBtlSppNative( 74): NativeJBtlSpp_Create:Exiting Successfully 05-17 19:44:21.477 D/JBtlSpp ( 74): After NativeJBtlSpp_Create, status=SUCCESS, Context = 24 05-17 19:44:21.477 D/JBtlRbtlServices( 74): addUser: Entered, userRefCount = 1 05-17 19:44:21.477 D/BluetoothSppService( 74): port create returned status SUCCESS 05-17 19:44:21.477 D/JBtlSpp ( 74): enable: Entered 05-17 19:44:21.477 D/JBtlSpp ( 74): enable: UUID=00001101-0000-1000-8000-00805f9b34fb 05-17 19:44:21.477 D/JBtlSppNative( 74): NativeJBtlSpp_Enable: Entered 05-17 19:44:21.487 D/JBtlSppNative( 74): NativeJBtlSpp_Enable: BTL_SPP_Enable returned 0 05-17 19:44:21.487 D/JBtlSppNative( 74): NativeJBtlSpp_Enable:Exiting 05-17 19:44:21.487 D/JBtlSpp ( 74): After NativeJBtlSpp_Enable, status=SUCCESS 05-17 19:44:21.487 D/JBtlSpp ( 74): enable: Exiting 05-17 19:44:21.487 D/BluetoothSppService( 74): port enable returned status SUCCESS 05-17 19:44:21.487 D/BluetoothSppService( 74): connectPort called! 05-17 19:44:21.497 D/BluetoothSppService( 74): connectPort received bdaddress:00:18:E4:1D:23:9B 05-17 19:44:21.527 D/BluetoothSppService( 74): Trying to connect to 00:18:E4:1D:23:9B 05-17 19:44:21.527 D/JBtlSpp ( 74): setServiceName: Entered 05-17 19:44:21.527 D/JBtlSppNative( 74): NativeJBtlSpp_SetServiceName: Entered 05-17 19:44:21.547 D/JBtlSppNative( 74): NativeJBtlSpp_SetServiceName: native func returned 0 05-17 19:44:21.547 D/JBtlSppNative( 74): NativeJBtlSpp_SetServiceName:Exiting 05-17 19:44:21.547 D/JBtlSpp ( 74): After setServiceName, status=SUCCESS 05-17 19:44:21.547 D/JBtlSpp ( 74): setServiceName: Exiting 05-17 19:44:21.557 D/BluetoothSppService( 74): port setServiceName returned status SUCCESS 05-17 19:44:21.587 D/JBtlSpp ( 74): connect: Entered connecting to 00:18:E4:1D:23:9B 05-17 19:44:21.587 D/JBtlSppNative( 74): NativeJBtlSpp_Connect: Entered 05-17 19:44:21.597 D/JBtlSppNative( 74): NativeJBtlSpp_Connect: BTL_SPP_Connect returned 2 05-17 19:44:21.597 D/JBtlSppNative( 74): NativeJBtlSpp_Connect:Exiting 05-17 19:44:21.597 D/JBtlSpp ( 74): After NativeJBtlSpp_Connect, status=PENDING 05-17 19:44:21.747 D/AK8973 ( 61): Compass CLOSE 05-17 19:44:21.887 W/Process ( 74): Unable to open /proc/5749/status 05-17 19:44:21.917 I/ActivityManager( 74): Displayed activity com.gtosoft.dash/.Dash: 1279 ms (total 1279 ms) 05-17 19:44:24.047 D/ ( 74): signal_BTEVENT_ACCESSIBLE_CHANGE: Entered 05-17 19:44:24.047 D/ ( 74): signal_BTEVENT_ACCESSIBLE_CHANGE: Calling Java Accessible Change callback 05-17 19:44:24.047 D/JBtlBmg ( 74): nativeAccessibleChange 05-17 19:44:24.087 D/BluetoothService( 74): Callback - accessbileChange, btErrCode = NO_ERROR, mode = CONNECTABLE_ONLY 05-17 19:44:24.087 D/BluetoothService( 74): Sending ACTION_SCAN_MODE_CHANGED intent, mode = 21 05-17 19:44:24.087 D/ ( 74): signal_BTEVENT_ACCESSIBLE_CHANGE: Exiting 05-17 19:44:24.097 D/ ( 74): signal_BTEVENT_LINK_CONNECT_CNF: Entered 05-17 19:44:24.097 D/ ( 74): signal_BTEVENT_LINK_CONNECT_CNF: context: 1, errCode: 0 05-17 19:44:24.097 D/ ( 74): signal_BTEVENT_LINK_CONNECT_CNF: Calling Java Link Connect Confirmation callback 05-17 19:44:24.097 D/JBtlBmg ( 74): nativeLinkConnectCnf 05-17 19:44:24.107 D/BluetoothService( 74): Callback - linkConnectCnf, btErrCode = NO_ERROR, bdAddr = 00:18:E4:1D:23:9B 05-17 19:44:24.117 D/JBtlBmg ( 74): getKnownDeviceInfo: Entered 05-17 19:44:24.117 D/JBtlBmg ( 74): getKnownDeviceInfo: Calling NativeJBtlBmg_GetKnownDeviceInfo 05-17 19:44:24.137 D/ ( 74): NativeJBtlBmg_GetKnownDeviceInfo: Entered 05-17 19:44:24.137 D/ ( 74): NativeJBtlBmg_GetKnownDeviceInfo: Calling BTL_BMG_GetKnownDeviceInfo 05-17 19:44:24.227 D/JBtlBmgJniKnownDeviceInfo( 74): setValues: Entered 05-17 19:44:24.227 D/ ( 74): NativeJBtlBmg_GetKnownDeviceInfo:Exiting 05-17 19:44:24.227 D/JBtlBmg ( 74): getKnownDeviceInfo: After NativeJBtlBmg_GetKnownDeviceInfo, status=SUCCESS 05-17 19:44:24.227 D/JBtlBmg ( 74): getKnownDeviceInfo: Exiting 05-17 19:44:24.227 D/BluetoothService( 74): onRemoteDeviceConnected, device 00:18:E4:1D:23:9B is Paired 05-17 19:44:24.227 D/BluetoothService( 74): Sending ACTION_ACL_CONNECTED intent, address = 00:18:E4:1D:23:9B 05-17 19:44:24.227 D/BluetoothA2dpService( 74): Received intent with action: android.bluetooth.device.action.ACL_CONNECTED 05-17 19:44:24.227 D/ ( 74): signal_BTEVENT_LINK_CONNECT_CNF: Exiting 05-17 19:44:24.757 D/JBtlAg ( 163): setIndicatorValue: entered 05-17 19:44:24.767 I/JBtlAg ( 163): After NativeJBtlAg_SetIndicatorValue, status = SUCCESS 05-17 19:44:24.767 D/JBtlAg ( 163): setIndicatorValue: exiting 05-17 19:44:24.807 D/JBtlSppNative( 74): signal_SPP_EVENT_OPEN: Entered 05-17 19:44:24.807 D/JBtlSppNative( 74): signal_SPP_EVENT_OPEN: status: 0 context:24 05-17 19:44:24.827 D/JBtlSpp ( 74): nativeCb_open: Entered from 00:18:E4:1D:23:9B 05-17 19:44:24.827 D/JBtlSpp ( 74): nativeCb_open: Calling callback 05-17 19:44:24.827 D/BluetoothSppService( 74): connected called! 05-17 19:44:24.847 D/JBtlSpp ( 74): connect: Exiting 05-17 19:44:24.847 D/BluetoothSppService( 74): port connect returned status SUCCESS 05-17 19:44:24.847 D/JBtlSppNative( 74): signal_SPP_EVENT_OPEN: Exiting 05-17 19:44:24.847 D/JBtlSppNative( 74): signal_SPP_EVENT_MODEM_STATUS_IND: Entered 05-17 19:44:24.847 D/JBtlSppNative( 74): signal_SPP_EVENT_MODEM_STATUS_IND: Exiting 05-17 19:44:25.424 D/BluetoothSppService( 74): writeSync called! 05-17 19:44:25.424 D/JBtlSpp ( 74): write: Entered 05-17 19:44:25.427 D/JBtlSppNative( 74): NativeJBtlSpp_WriteNative: Entered 05-17 19:44:25.427 D/JBtlSppNative( 74): NativeJBtlSpp_WriteNative: BTL_SPP_WriteSync returned 0 written: 6 total: 0/6 05-17 19:44:25.437 D/JBtlSppNative( 74): signal_SPP_EVENT_TX_DATA_COMPLETE: Entered 05-17 19:44:25.437 D/JBtlSppNative( 74): signal_SPP_EVENT_TX_DATA_COMPLETE: status: 0 context:24 txDataLen:6 05-17 19:44:25.437 D/JBtlSppNative( 74): signal_SPP_EVENT_TX_DATA_COMPLETE: Exiting ok 05-17 19:44:25.437 D/JBtlSppNative( 74): NativeJBtlSpp_WriteNative: written 6 05-17 19:44:25.437 D/JBtlSppNative( 74): NativeJBtlSpp_WriteNative:Exiting with 0 05-17 19:44:25.437 D/JBtlSppNative( 74): NativeJBtlSpp_WriteNative: returning 6 bytes 05-17 19:44:25.437 D/JBtlSpp ( 74): After write, status=SUCCESS 05-17 19:44:25.437 D/JBtlSpp ( 74): write: Exiting 05-17 19:44:25.437 D/BluetoothSppPort( 5809): written 6 bytes 05-17 19:44:25.467 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: Entered 05-17 19:44:25.467 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: status: 0 context: 24 rxDataLen: 1 05-17 19:44:25.467 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: Exiting 05-17 19:44:25.477 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: Entered 05-17 19:44:25.477 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: status: 0 context: 24 rxDataLen: 5 05-17 19:44:25.477 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: Exiting 05-17 19:44:25.487 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: Entered 05-17 19:44:25.487 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: status: 0 context: 24 rxDataLen: 10 05-17 19:44:25.487 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: Exiting 05-17 19:44:25.497 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: Entered 05-17 19:44:25.497 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: status: 0 context: 24 rxDataLen: 7 05-17 19:44:25.497 D/JBtlSppNative( 74): signal_SPP_EVENT_RX_DATA_IND: Exiting 05-17 19:44:27.930 W/ActivityManager( 74): Activity destroy timeout for HistoryRecord{447e0d48 com.gtosoft.dash/.Dash} 05-17 19:44:29.907 D/dalvikvm( 448): GC freed 78 objects / 3664 bytes in 153ms 05-17 19:44:29.917 D/BluetoothSppService( 74): writeSync called! 05-17 19:44:29.917 D/JBtlSpp ( 74): write: Entered 05-17 19:44:29.917 D/JBtlSppNative( 74): NativeJBtlSpp_WriteNative: Entered 05-17 19:44:29.927 D/JBtlSppNative( 74): NativeJBtlSpp_WriteNative: BTL_SPP_WriteSync returned 0 written: 6 total: 0/6 05-17 19:44:29.937 D/JBtlSppNative( 74): signal_SPP_EVENT_TX_DATA_COMPLETE: Entered 05-17 19:44:29.937 D/JBtlSppNative( 74): signal_SPP_EVENT_TX_DATA_COMPLETE: status: 0 context:24 txDataLen:6 05-17 19:44:29.937 D/JBtlSppNative( 74): signal_SPP_EVENT_TX_DATA_COMPLETE: Exiting ok 05-17 19:44:29.937 D/JBtlSppNative( 74): NativeJBtlSpp_WriteNative: written 6 05-17 19:44:29.937 D/JBtlSppNative( 74): NativeJBtlSpp_WriteNative:Exiting with 0 05-17 19:44:29.937 D/JBtlSppNative( 74): NativeJBtlSpp_WriteNative: returning 6 bytes 05-17 19:44:29.937 D/JBtlSpp ( 74): After write, status=SUCCESS 05-17 19:44:29.937 D/JBtlSpp ( 74): write: Exiting

    Read the article

  • Hi how to show the results in a datatable while we are using yui

    - by udaya
    Hi I am using yui to display a datagrid ... <?php $host = "localhost"; //database location $user = "root"; //database username $pass = ""; //database password $db_name = "cms"; //database name //database connection $link = mysql_connect($host, $user, $pass); mysql_select_db($db_name); //sets encoding to utf8 $result = mysql_query("select dStud_id,dMarkObtained1,dMarkObtained2,dMarkObtained3,dMarkTotal from tbl_internalmarkallot"); //$res = mysql_fetch_array($result); while($res = mysql_fetch_array($result)) { //print_r($res); $JsonVar = json_encode($res); echo "<input type='text' name='json' id='json' value ='$JsonVar'>"; } //print_r (mysql_fetch_array($result)); //echo "<input type='text' name='json' id='json' value ='$JsonVar'>"; ?> <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> <title>Client-side Pagination</title> <style type="text/css"> body { margin:0; padding:0; } </style> <link rel="stylesheet" type="text/css" href="build/fonts/fonts-min.css" /> <link rel="stylesheet" type="text/css" href="build/paginator/assets/skins/sam/paginator.css" /> <link rel="stylesheet" type="text/css" href="build/datatable/assets/skins/sam/datatable.css" /> <script type="text/javascript" src="build/yahoo-dom-event/yahoo-dom-event.js"></script> <script type="text/javascript" src="build/connection/connection-min.js"></script> <script type="text/javascript" src="build/json/json-min.js"></script> <script type="text/javascript" src="build/element/element-min.js"></script> <script type="text/javascript" src="build/paginator/paginator-min.js"></script> <script type="text/javascript" src="build/datasource/datasource-min.js"></script> <script type="text/javascript" src="build/datatable/datatable-min.js"></script> <script type="text/javascript" src="YuiJs.js"></script> <style type="text/css"> #paginated { text-align: center; } #paginated table { margin-left:auto; margin-right:auto; } #paginated, #paginated .yui-dt-loading { text-align: center; background-color: transparent; } </style> </head> <body class="yui-skin-sam" onload="ProjectDatatable(document.getElementById('json').value);"> <h1>Client-side Pagination</h1> <div class="exampleIntro"> </div> <input type="hidden" id="HfId"/> <div id="paginated"> </div> <script type="text/javascript"> /*YAHOO.util.Event.onDOMReady(function() { YAHOO.example.ClientPagination = function() { var myColumnDefs = [ {key:"dStud_id", label:"ID",sortable:true, resizeable:true, editor: new YAHOO.widget.TextareaCellEditor()}, {key:"dMarkObtained1", label:"Name",sortable:true}, {key:"dMarkObtained2", label:"CycleTest1"}, {key:"dMarkObtained3", label:"CycleTest2"}, {key:"dMarkTotal", label:"CycleTest3"}, ]; var myDataSource = new YAHOO.util.DataSource("assets/php/json_proxy.php?"); myDataSource.responseType = YAHOO.util.DataSource.TYPE_JSON; myDataSource.responseSchema = { resultsList: "records", fields: ["dStud_id","dMarkObtained1","dMarkObtained2","dMarkObtained3","dMarkTotal"] }; var oConfigs = { paginator: new YAHOO.widget.Paginator({ rowsPerPage: 15 }), initialRequest: "results=504" }; var myDataTable = new YAHOO.widget.DataTable("paginated", myColumnDefs, myDataSource, oConfigs); return { oDS: myDataSource, oDT: myDataTable }; }(); });*/ </script> <?php echo "m".$res['dMarkObtained1']; echo "m".$res['dMarkObtained2']; echo "m".$res['dMarkObtained3']; echo "Tm".$res['dMarkTotal']; {?><? }?> </body> </html> </body> </html> This is my page where i am fetching the data's from the database function generateDatatable(target, jsonObj, myColumnDefs, hfId) { var root; for (key in jsonObj) { root = key; break; } var rootId = "id"; if (jsonObj[root].length > 0) { for (key in jsonObj[root][0]) { rootId = key; break; } } YAHOO.example.DynamicData = function() { var myPaginator = new YAHOO.widget.Paginator({ rowsPerPage: 10, template: YAHOO.widget.Paginator.TEMPLATE_ROWS_PER_PAGE, rowsPerPageOptions: [5, 25, 50, 100], pageLinks: 10 }); // DataSource instance var myDataSource = new YAHOO.util.DataSource(jsonObj); myDataSource.responseType = YAHOO.util.DataSource.TYPE_JSON; myDataSource.responseSchema = { resultsList: root, fields: new Array() }; myDataSource.responseSchema.fields[0] = rootId; for (var i = 0; i < myColumnDefs.length; i++) { myDataSource.responseSchema.fields[i + 1] = myColumnDefs[i].key; } // DataTable configuration var myConfigs = { sortedBy: { key: myDataSource.responseSchema.fields[1], dir: YAHOO.widget.DataTable.CLASS_ASC }, // Sets UI initial sort arrow paginator: myPaginator }; // DataTable instance var myDataTable = new YAHOO.widget.DataTable(target, myColumnDefs, myDataSource, myConfigs); myDataTable.subscribe("rowMouseoverEvent", myDataTable.onEventHighlightRow); myDataTable.subscribe("rowMouseoutEvent", myDataTable.onEventUnhighlightRow); myDataTable.subscribe("rowClickEvent", myDataTable.onEventSelectRow); myDataTable.subscribe("checkboxClickEvent", function(oArgs) { var hidObj = document.getElementById(hfId); var elCheckbox = oArgs.target; var oRecord = this.getRecord(elCheckbox); var id = oRecord.getData(rootId); if (elCheckbox.checked) { if (hidObj.value == "") { hidObj.value = id; } else { hidObj.value += "," + id; } } else { hidObj.value = removeIdFromArray("" + hfId, id); } }); myPaginator.subscribe("changeRequest", function() { if (document.getElementById(hfId).value != "") { /*if (document.getElementById("ConfirmationPanel").style.display == 'block') { document.getElementById("ConfirmationPanel").style.display = 'none'; }*/ document.getElementById(hfId).value = ""; } return true; }); myDataTable.handleDataReturnPayload = function(oRequest, oResponse, oPayload) { oPayload.totalRecords = oResponse.meta.totalRecords; return oPayload; } return { ds: myDataSource, dt: myDataTable }; } (); } function removeIdFromArray(values, id) { values = document.getElementById(values).value; if (values.indexOf(',') == 0) { values = values.substring(1); } if (values.indexOf(values.length - 1) == ",") { values = values.substring(0, values.length - 1); } var ids = values.split(','); var rtnValue = ""; for (var i = 0; i < ids.length; i++) { if (ids[i] != id) { rtnValue += "," + ids[i]; } } if (rtnValue.indexOf(",") == 0) { rtnValue = rtnValue.substring(1); } return rtnValue; } function edityuitable() { var ErrorDiv = document.getElementById("ErrorDiv"); var editId=document.getElementById("ctl00_ContentPlaceHolder1_HfId").value; if(editId.length == 0) { ErrorDiv.innerHTML = getErrorMsgStyle("Select a row for edit"); //alert("Select a row for edit"); return false; } else { var editarray = editId.split(","); if (editarray.length != 1) { ErrorDiv.innerHTML = getErrorMsgStyle("Select One row for edit"); //alert("Select One row for edit"); return false; } else if (editarray.length == 1) { return true; } } } function Deleteyuitable() { var ErrorDiv = document.getElementById("ErrorDiv"); var editId=document.getElementById("ctl00_ContentPlaceHolder1_HfId").value; if(editId.length == 0) { ErrorDiv.innerHTML = getErrorMsgStyle("Select a row for Delete"); return false; } else { return true; } } function ProjectDatatable(HfJsonValue){ alert(HfJsonValue); var myColumnDefs = [ {key:"dStud_id", label:"ID", width:150, sortable:true, sortOptions:{defaultDir:YAHOO.widget.DataTable.CLASS_DESC}}, {key:"dMarkObtained1", label:"Marks", width:200, sortable:true, sortOptions:{defaultDir:YAHOO.widget.DataTable.CLASS_DESC}}, {key:"dMarkObtained2", label:"Marks1", width:150, sortable:true, sortOptions:{defaultDir:YAHOO.widget.DataTable.CLASS_DESC}}, {key:"dMarkObtained3", label:"Marks2", width:200, sortable:true, sortOptions:{defaultDir:YAHOO.widget.DataTable.CLASS_DESC}}, {key:"dMarkTotal", label:"Total", width:150, sortable:true, sortOptions:{defaultDir:YAHOO.widget.DataTable.CLASS_DESC}}, {key:"", formatter:"checkbox"} ]; var jsonObj=eval('(' + HfJsonValue + ')'); var target = "paginated"; var hfId = "HfId"; generateDatatable(target,jsonObj,myColumnDefs,hfId) } // JavaScript Document This is my script page when i load the page i do get the first row from the database but the consequtive data's are not displayed in the alert box how can i receieve the data's in the datagrid

    Read the article

  • Revolutionary brand powder packing machine price from affecting marketplace boom and put on uniform in addition to a lengthy service life

    - by user74606
    In mining in stone crushing, our machinery company's encounter becomes much more apparent. As a consequence of production capacity in between 600~800t/h of mining stone crusher, stone is mine Mobile Cone Crushing Plant Price 25~40 times, effectively solved the initially mining stone crusher operation because of low yield prices, no upkeep problems. Full chunk of mining stone crusher. Maximum particle size for crushing 1000x1200mm, an effective answer for the original side is mine stone provide, storing significant chunks of stone can not use complications in mines. Completed goods granularity is modest, only 2~15mm, an effective option for the original mine stone size, generally blocking chute production was an issue even the grinding machine. Two types of material mixed great uniformity, desulfurization of mining stone by adding weight considerably. Present quantity added is often reached 60%, effectively minimizing the cost of raw supplies. Electrical energy consumption has fallen. Dropped 1~2KWh/t tons of mining stone electrical energy consumption, annual electricity savings of one hundred,000 yuan. Efficient labor intensity of workers and also the atmosphere. Due to mine stone powder packing machine price a high degree of automation, with out human make contact with supplies, workers working circumstances enhanced significantly. Positive aspects, and along with mine for stone crushing, CS series cone Crusher has the following efficiency traits. CS series cone Crusher Chamber is divided into 3 unique designs, the user is usually chosen in accordance with the scenario on site crushing efficiency is high, uniform item size, grain shape, rolling mortar wall friction and put on uniform in addition to a extended service life of crushing cavity-. CS series cone Crusher utilizes a one of a kind dust-proof seal, sealing dependable, properly extend the service life of the lubricant replacement cycle and parts. CS series Sprial Sand washer price manufacture of important components to choose unique materials. Each and every stroke left rolling mortar wall of broken cone distances, by permitting a lot more products into the crushing cavity, as well as the formation of big discharge volume, speed of supplies by way of the crushing Chamber. This machine makes use of the principle of crushing cavity, also as unique laminated crushing, particle fragmentation, so that the completed product drastically improved the proportions of a cube, needle-shaped stones to lower particle levels extra evenly.

    Read the article

  • Alright, I'm still stuck on this homework problem. C++

    - by Josh
    Okay, the past few days I have been trying to get some input on my programs. Well I decided to scrap them for the most part and try again. So once again, I'm in need of help. For the first program I'm trying to fix, it needs to show the sum of SEVEN numbers. Well, I'm trying to change is so that I don't need the mem[##] = ####. I just want the user to be able to input the numbers and the program run from there and go through my switch loop. And have some kind of display..saying like the sum is?.. Here's my code so far. #include <iostream> #include <iomanip> #include <ios> using namespace std; int main() { const int READ = 10; const int WRITE = 11; const int LOAD = 20; const int STORE = 21; const int ADD = 30; const int SUBTRACT = 31; const int DIVIDE = 32; const int MULTIPLY = 33; const int BRANCH = 40; const int BRANCHNEG = 41; const int BRANCHZERO = 42; const int HALT = 43; int mem[100] = {0}; //Making it 100, since simpletron contains a 100 word mem. int operation; //taking the rest of these variables straight out of the book seeing as how they were italisized. int operand; int accum = 0; // the special register is starting at 0 int counter; for ( counter=0; counter < 100; counter++) mem[counter] = 0; // This is for part a, it will take in positive variables in //a sent-controlled loop and compute + print their sum. Variables from example in text. mem[0] = 1009; mem[1] = 1109; mem[2] = 2010; mem[3] = 2111; mem[4] = 2011; mem[5] = 3100; mem[6] = 2113; mem[7] = 1113; mem[8] = 4300; counter = 0; //Makes the variable counter start at 0. while(true) { operand = mem[ counter ]%100; // Finds the op codes from the limit on the mem (100) operation = mem[ counter ]/100; //using a switch loop to set up the loops for the cases switch ( operation ){ case READ: //reads a variable into a word from loc. Enter in -1 to exit cout <<"\n Input a positive variable: "; cin >> mem[ operand ]; counter++; break; case WRITE: // takes a word from location cout << "\n\nThe content at location " << operand << " is " << mem[operand]; counter++; break; case LOAD:// loads accum = mem[ operand ];counter++; break; case STORE: //stores mem[ operand ] = accum;counter++; break; case ADD: //adds accum += mem[operand];counter++; break; case SUBTRACT: // subtracts accum-= mem[ operand ];counter++; break; case DIVIDE: //divides accum /=(mem[ operand ]);counter++; break; case MULTIPLY: // multiplies accum*= mem [ operand ];counter++; break; case BRANCH: // Branches to location counter = operand; break; case BRANCHNEG: //branches if acc. is < 0 if (accum < 0) counter = operand; else counter++; break; case BRANCHZERO: //branches if acc = 0 if (accum == 0) counter = operand; else counter++; break; case HALT: // Program ends break; } } return 0; } part B int main() { const int READ = 10; const int WRITE = 11; const int LOAD = 20; const int STORE = 21; const int ADD = 30; const int SUBTRACT = 31; const int DIVIDE = 32; const int MULTIPLY = 33; const int BRANCH = 40; const int BRANCHNEG = 41; const int BRANCHZERO = 41; const int HALT = 43; int mem[100] = {0}; int operation; int operand; int accum = 0; int pos = 0; int j; mem[22] = 7; // loop 7 times mem[25] = 1; // increment by 1 mem[00] = 4306; mem[01] = 2303; mem[02] = 3402; mem[03] = 6410; mem[04] = 3412; mem[05] = 2111; mem[06] = 2002; mem[07] = 2312; mem[08] = 4210; mem[09] = 2109; mem[10] = 4001; mem[11] = 2015; mem[12] = 3212; mem[13] = 2116; mem[14] = 1101; mem[15] = 1116; mem[16] = 4300; j = 0; while ( true ) { operand = memory[ j ]%100; // Finds the op codes from the limit on the memory (100) operation = memory[ j ]/100; //using a switch loop to set up the loops for the cases switch ( operation ){ case 1: //reads a variable into a word from loc. Enter in -1 to exit cout <<"\n enter #: "; cin >> memory[ operand ]; break; case 2: // takes a word from location cout << "\n\nThe content at location " << operand << "is " << memory[operand]; break; case 3:// loads accum = memory[ operand ]; break; case 4: //stores memory[ operand ] = accum; break; case 5: //adds accum += mem[operand];; break; case 6: // subtracts accum-= memory[ operand ]; break; case 7: //divides accum /=(memory[ operand ]); break; case 8: // multiplies accum*= memory [ operand ]; break; case 9: // Branches to location j = operand; break; case 10: //branches if acc. is < 0 break; case 11: //branches if acc = 0 if (accum == 0) j = operand; break; case 12: // Program ends exit(0); break; } j++; } return 0; }

    Read the article

  • Netcat file transfer problem

    - by thepurplepixel
    I have two custom scripts I just wrote to facilitate transferring files between my VPS and my home server. They are both written in bash (short & sweet): To send: #!/bin/bash SENDFILE=$1 PORT=$2 HOST='<my house>' HOSTIP=`host $HOST | grep "has address" | cut --delimiter=" " -f 4` echo Transferring file \"$SENDFILE\" to $HOST \($HOSTIP\). tar -c "$SENDFILE" | pv -c -N tar -i 0.5 | lzma -z -c -6 | pv -c -N lzma -i 0.5 | nc -q 1 $HOSTIP $PORT echo Done. To receive: #!/bin/bash SERVER='<myserver>' SERVERIP=`host $SERVER | grep "has address" | cut --delimiter=" " -f 4` PORT=$1 echo Receiving file from $SERVER \($SERVERIP\) on port $PORT. nc -l $PORT | pv -c -N netcat -i 0.5 | lzma -d -c | pv -c -N lzma -i 0.5 | tar -xf - echo Done. The problem is that, for a very quick second, I see something flash along the lines of "Connection Refused" (before pv overwrites it), and no file is ever transferred. The port is forwarded through my router, and nmap confirms it: ~$ sudo nmap -sU -PN -p55515 -v <my house> Starting Nmap 5.00 ( http://nmap.org ) at 2010-04-21 18:10 EDT NSE: Loaded 0 scripts for scanning. Initiating Parallel DNS resolution of 1 host. at 18:10 Completed Parallel DNS resolution of 1 host. at 18:10, 0.00s elapsed Initiating UDP Scan at 18:10 Scanning 74.13.25.94 [1 port] Completed UDP Scan at 18:10, 2.02s elapsed (1 total ports) Host 74.13.25.94 is up. Interesting ports on 74.13.25.94: PORT STATE SERVICE 55515/udp open|filtered unknown Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 2.08 seconds Raw packets sent: 2 (56B) | Rcvd: 5 (260B) Also, running netcat normally doesn't work either: squircle@summit:~$ netcat <my house> 55515 <my house> [<my IP>] 55515 (?) : Connection refused Both boxes are Ubuntu Karmic (9.10). The receiver has no firewall, and outbound traffic on that port is allowed on the sender. I have no idea what to troubleshoot next. Any ideas? P.S.: Feel free to move this to SO/SF if you feel it would fit better there.

    Read the article

  • Php code works on every browser but not on IE8, help please

    - by DomingoSL
    I think the error has to be in a incompatibility with IE8 and the cookies manipulation, cuz in IE8 you can see the password and login asking screen but when you enter the data and send it the browser seems to do nothing, this is a url you were you can try my code: http://200.8.27.127/tiempo/teacher.php and this is the code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta content="it" http-equiv="Content-Language" /> <meta content="text/html; charset=utf-8" http-equiv="Content-Type" /> <title>Formulario</title> <style type="text/css"> h1 { font: 50px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #111; text-shadow: 0px 2px 3px #555; } h2 { font: 14px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #CCC; text-shadow: 0px 1px 2px #555; } h3 { font: 10px Tahoma, Helvetica, Arial, Sans-Serif; text-align: center; color: #CCC; } b1 { font: 16px Tahoma, Helvetica, Arial, Sans-Serif; color: #DDD; } b2 { font: 10px Tahoma, Helvetica, Arial, Sans-Serif; color: #F9F7ED; } .caja { width: 690px; height: 40px; background-color: transparent; border: 0px solid #000000; font-size:x-large; color: #222; font-family: 'Trebuchet MS', 'Lucida Sans Unicode', 'Lucida Grande', 'Lucida Sans', Arial, sans-serif; font-weight: bold;" size="299"; } .style1 { text-align: right; } </style> </head> <body style="background-image: url('IMG/bg.png')"> <script type="text/javascript" src="JS/jquery-1.4.2.min.js"></script> <script type="text/javascript" src="JS/jquery.notifications-1.1.min.js"></script> <link rel="stylesheet" type="text/css" href="JS/jquery.notifications.css" /> <script> function checkCharCount(textfield) { if(textfield.value.length > 300) textfield.value = textfield.value.substr(0, 300); document.getElementById("charCounter").innerHTML = 300 - textfield.value.length; } </script> <?php include("/LIB/HeadSQL.php"); include("/LIB/error.php"); if (isset($_COOKIE['ID_tablon'])) { $username = $_COOKIE['ID_tablon']; $pass = $_COOKIE['Key_tablon']; $check = mysql_query("SELECT * FROM usuarios WHERE nombre = '$username'") or die(mysql_error()); while($info = mysql_fetch_array( $check )) { if ($pass != $info['clave']) { login(); } else { entro($info['email'],$username); } } } else { login(); } function login() { if (isset($_POST['quiere'])) { if(!$_POST['username'] | !$_POST['pass']) { include("LIB/login.php"); error('Debes llenar todos los campos.',0); } else { $check = mysql_query("SELECT * FROM usuarios WHERE nombre = '".$_POST['username']."'") or die(mysql_error()); $check2 = mysql_num_rows($check); if ($check2 == 0) { include("LIB/login.php"); error('Ese usuario no existe.',0); } while($info = mysql_fetch_array( $check )) { $_POST['pass'] = stripslashes($_POST['pass']); $info['clave'] = stripslashes($info['clave']); //$_POST['pass'] = md5($_POST['pass']); if ($_POST['pass'] != $info['clave']) { include("LIB/login.php"); error('La clave es incorrecta.',0); } else { $_POST['username'] = stripslashes($_POST['username']); $hour = time() + 3600; setcookie("ID_tablon", $_POST['username'], $hour); setcookie("Key_tablon", $_POST['pass'], $hour); entro($info['email'],$_POST['username']); } } } } else { include("LIB/login.php"); } exit; } function entro($email,$username) { ?> <div id="todo" align="center" > <div id="cabeza" style="width:850px;height:100px"> </div> <div id="contenido" style="width:850px;height:420px;background-image: url(IMG/cuadro.png)" > <div id="titulo" style="width:765px;height:75px;padding-top: 18px;margin: auto;text-align: left;"> <b1>Bienvenido <b><?php echo($username); ?></b></b1><br> <?php $check = mysql_query("SELECT * FROM sms WHERE ref = '".$username."' ORDER BY fecha DESC LIMIT 0, 1") or die(mysql_error()); while($info = mysql_fetch_array( $check )) { echo("<b1> Tu ultimo mensaje enviado fue: </b1><b2>" . $info['texto'] . " enviado el " . $info['fecha'] . "</b2>"); } ?> </div> <form method="post"> <div id="formulario" style="width:850px;height:255px;margin-top: 10px"> <div id="foto" align="right" style="width:725px; height:40px;padding-top: 11px;margin: auto"> <?php $size = 60; $grav_url = "http://www.gravatar.com/avatar/" . md5( strtolower( $email ) ) . "?size=" . $size; $size = 256; $grav_urlB = "http://www.gravatar.com/avatar/" . md5( strtolower( $email ) ) . "?size=" . $size; echo('<img alt="Image" src="' . $grav_url . '" />'); ?> </div> <div id="texto" style="width:850px;height:29px; margin-top: 38px;margin-left: 4px"> <input name="sms" type="text" onKeyUp="checkCharCount(this)" class="caja" /> </div> <div id="botones" style="width:725px;height:27px; margin-top: 15px" class="style1"> <input name="usuario" type="hidden" value="<?php echo($username); ?>" /> <input name="Submit1" type="image" value="submit" src="IMG/envia.png" /> </div> <div id="resta" style="width:850px;height:29px; margin-top: 53px;margin-left: 4px"> <h2><span id="charCounter">300</span> caracteres restantes.</h2> <h3><a href=logout.php>Cerrar Sesion</a></h3> </div> </div> </form> </div> </div> </body> </html> <?php session_start(); if (isset($_POST['Submit1'])) { if (isset($_SESSION['token']) && (time() - $_SESSION['token']) < 5) { error('Debes esperar 5 segundos para poder enviar otra informacion.',0); } else { $_SESSION['token'] = time(); include("/LIB/HeadSQL.php"); include("/LIB/comprueba.php"); $insert = "INSERT INTO sms (ref, texto, fecha) VALUES ('" . addslashes($_POST['usuario']) . "', '" . addslashes($_POST['sms']) . "', NOW() )"; $add_member = mysql_query($insert); error("Tu mensage ha sido enviado con exito.",1); } } exit; } ?> do you think the isuue can be on the javascript? try the code firts with Firefox or google chrome, then try in IE8.

    Read the article

  • iptables management tools for large scale environment

    - by womble
    The environment I'm operating in is a large-scale web hosting operation (several hundred servers under management, almost-all-public addressing, etc -- so anything that talks about managing ADSL links is unlikely to work well), and we're looking for something that will be comfortable managing both the core ruleset (around 12,000 entries in iptables at current count) plus the host-based rulesets we manage for customers. Our core router ruleset changes a few times a day, and the host-based rulesets would change maybe 50 times a month (across all the servers, so maybe one change per five servers per month). We're currently using filtergen (which is balls in general, and super-balls at our scale of operation), and I've used shorewall in the past at other jobs (which would be preferable to filtergen, but I figure there's got to be something out there that's better than that). The "musts" we've come up with for any replacement system are: Must generate a ruleset fairly quickly (a filtergen run on our ruleset takes 15-20 minutes; this is just insane) -- this is related to the next point: Must generate an iptables-restore style file and load that in one hit, not call iptables for every rule insert Must not take down the firewall for an extended period while the ruleset reloads (again, this is a consequence of the above point) Must support IPv6 (we aren't deploying anything new that isn't IPv6 compatible) Must be DFSG-free Must use plain-text configuration files (as we run everything through revision control, and using standard Unix text-manipulation tools are our SOP) Must support both RedHat and Debian (packaged preferred, but at the very least mustn't be overtly hostile to either distro's standards) Must support the ability to run arbitrary iptables commands to support features that aren't part of the system's "native language" Anything that doesn't meet all these criteria will not be considered. The following are our "nice to haves": Should support config file "fragments" (that is, you can drop a pile of files in a directory and say to the firewall "include everything in this directory in the ruleset"; we use configuration management extensively and would like to use this feature to provide service-specific rules automatically) Should support raw tables Should allow you to specify particular ICMP in both incoming packets and REJECT rules Should gracefully support hostnames that resolve to more than one IP address (we've been caught by this one a few times with filtergen; it's a rather royal pain in the butt) The more optional/weird iptables features that the tool supports (either natively or via existing or easily-writable plugins) the better. We use strange features of iptables now and then, and the more of those that "just work", the better for everyone.

    Read the article

  • Phonegap / jquery mobile slide transition not workign properly on first call

    - by Alexander Casassovici
    I have an awkward visual glitch. I want nice transition when changing pages on the app. Unfortunately first time i change to another page, Instead of sliding current pagg out and new page in , current page is immediately replaces by the new page, then slides out... and when it's out of view it's the new page is shown... the second time around it works like a charm though !!! This is running on iphone with jquery mobile + phonegap I made a video to make the issue clear: http://www.youtube.com/watch?v=Ybvzh_wTnSE <body style="background-color: #000;"> <div id="container" style="display:none;"> <div id="side-menu" style="display:none;"> <div id="header_top"></div> <a href="#dives" onclick="showdives();"><div id="header_dives" class="selected"></div></a> <div id="header_spacer1"></div> <a href="#explore" onclick="showexplore();"><div id="header_explore"></div></a> <div id="header_spacer2"></div> <a href="#search" onclick="showsearch();"><div id="header_search"></div></a> <div id="header_spacer3"></div> <a href="#settings" onclick="showsettings();"><div id="header_settings"></div></a> <div id="header_bottom"></div> </div> <div id="slide_mask"> <!-- START of LOGIN page --> <div data-role="page" id="login"> <div id="home_frame"> <div id="home_logo"></div> <div id="home_fblogin" onclick="login()"></div> <div class="home_login"> <p>Email: <input type="text" name="user[email]" size="30"/></p> <p>Password: <input type="password" name="user[password]" size="30"/></p> <button onclick="show_page_home();">LOGIN</button> </div> </div> </div> <!-- END of LOGIN page --> <!-- START of LOGIN page --> <div data-role="page" id="dives" class="right_pane"> <p>My dives !</p> </div><!-- /content --> <div data-role="page" id="explore" class="hidden right_pane"> <p>My explore !</p> </div><!-- /content --> <div data-role="page" id="search" class="hidden right_pane"> <p>My search !</p> </div><!-- /content --> <div data-role="page" id="settings" class="hidden right_pane"> <p>My settings !</p> <button onclick="logout_db();">logout</button> </div><!-- /content --> <!-- END of LOGIN page --> </div> </div> <div id="log"></div> <div id="data"></div> </body> And the relevant CSS: body {margin: 0; font: 18px Helvetica; text-align: center; background-color: #000; background: url(../img/bg_big.png) repeat; -webkit-user-select: none; /* prevent copy paste for all elements */ } #container { width:320px; height:460px; overflow: hidden;} input{ -webkit-user-select: text; /* enable copy paste for elements with this class */} a {-webkit-user-select: none; /* prevent copy paste for all elements */} span {-webkit-user-select: none; /* prevent copy paste for all elements */} #side-menu {z-index: 1000 !important; position: fixed; height: 460px; width: 56.5px; background: url(../img/bg_big.png) no-repeat; display: inline-block; overflow: hidden; top: 0px; left: 0px; } #header_top {background: url(../img/header/header_top.png) no-repeat; background-size: 56.5px 48.96px; width: 56.5px; height: 48.96px; display: block;} #header_dives {background: url(../img/header/dives.png) no-repeat; background-size: 56.5px 51.75px; width: 56.5px; height: 51.75px; display: block;} #header_dives.selected{background: url(../img/header/dives_selected.png) no-repeat;} #header_spacer1{background: url(../img/header/header_space1.png) no-repeat; background-size: 56.5px 13.9px; width: 56.5px; height: 13.9px; display: block;} #header_explore{background: url(../img/header/explore.png) no-repeat; background-size: 56.5px 51.75px; width: 56.5px; height: 51.75px; display: block;} #header_explore.selected{background: url(../img/header/explore_selected.png) no-repeat;} #header_spacer2{background: url(../img/header/header_space2.png) no-repeat; background-size: 56.5px 15.33px; width: 56.5px; height: 15.33px; display: block;} #header_search{background: url(../img/header/search.png) no-repeat; background-size: 56.5px 51.75px; width: 56.5px; height: 51.75px; display: block;} #header_search.selected{background: url(../img/header/search_selected.png) no-repeat;} #header_spacer3{background: url(../img/header/header_space3.png) no-repeat; background-size: 56.5px 17.73px; width: 56.5px; height: 17.73px; display: block;} #header_settings{background: url(../img/header/settings.png) no-repeat; background-size: 56.5px 51.75px; width: 56.5px; height: 51.75px; display: block;} #header_settings.selected{background: url(../img/header/settings_selected.png) no-repeat;} #header_bottom{background: url(../img/header/header_bottom.png) no-repeat; background-size: 56.5px 160px; width: 56.5px; height: 160px; display: block;} .hidden {display: none;} .right_pane{width: 263.5px !important; background: url(../img/right_bg.png) no-repeat; background-size:263.5px 460px; width: 263.5px; height: 460px; left: 56.5px !important;} #slide_mask{ display: inline-block; overflow: hidden; padding-left: 56.5px; width: 263.5px; height: 460px; top: 0;} and the bit of JS: /////////////////////////////////// //MENU MECHANICS /////////////////////////////////// function showdives(){ $("#side-menu .selected").removeClass("selected"); $("#header_dives").addClass("selected"); } function showexplore(){ $("#side-menu .selected").removeClass("selected"); $("#header_explore").addClass("selected"); } function showsearch(){ $("#side-menu .selected").removeClass("selected"); $("#header_search").addClass("selected"); } function showsettings(){ $("#side-menu .selected").removeClass("selected"); $("#header_settings").addClass("selected"); } the onclick only add/remove the "selected" class to the menu items so... any hint ? been trying eveything for hours and still can't get it neat .. :(

    Read the article

  • What are incentives (if any) to use WinRT instead of .Net?

    - by Ark-kun
    Let's compare WinRT with .Net .Net .Net is the 13+ years evolution of COM. Three main parts of .Net are execution environment, standard libraries and supported languages. CLR is the native-code execution environment based on COM .Net Framework has a big set of standard libraries (implemented using managed and native code) that can be used from all .Net languages. There are .Net classes that allow using OS APIs. WPF or Silverlight provide a XAML-based UI framework .Net can be used with C++, C#, Javascript, Python, Ruby, VB, LISP, Scheme and many other languages. C++/.Net is a variation of the C++ language that allows interaction with .Net objects. .Net supports inheritance, generics, operator and method overloading and many other features. .Net allows creating apps that run on Windows (XP, 7, 8 Pro (Desktop and Metro), RT, CE, etc), Mac OS, Linux (+ other *nix); iOS, Android, Windows Phone (7, 8); Internet Explorer, Chrome, Firefox; XBox 360, Playstation Suite; raw microprocessors. There is support for creating games (2D/3D) using any managed language or C++. Created by Developer Division WinRT WinRT is based on COM. Three main parts of WinRT are execution environment, standard libraries and supported languages. WinRT has a native-code execution environment based on COM WinRT has a set of standard libraries that more or less can be used from WinRT languages. There are WinRT classes that allow using OS APIs. Unnamed Silverlight clone provides a XAML-based UI framework WinRT can be used with C++, C#, Javascript, VB. C++/CX is a variation of the C++ language that allows interaction with WinRT objects. Custom WinRT components don't support inheritance (classes must be sealed), generics, operator overloading and many other features. WinRT allows creating apps that run on Windows 8 Pro and RT (Metro only); Windows Phone 8 (limited). There is support for creating games (2D/3D) using C++ only. Ordered by Windows Team I think that all the aspects except the last ones are very important for developers. On the other hand it seems that the most important aspect for Microsoft is the last one. So, given the above comparison of conceptually identical technologies, what are incentives (if any) to use WinRT instead of .Net?

    Read the article

  • Very Unusual Margin Appears Always in Internet Explorer [CSS]

    - by Jay
    Only in Internet Explorer does this occur: I'm getting an additional margin (of 19 pixels) below a fieldset and I can't seem to see why, whatever I try! Try it for yourself, take a look at http://theshrop.com/d/call_us_or_call_in.php. To aid I've added a grid and some background colours. The fieldset should have a 1.125em bottom margin and it does in Safari, Firefox etc. It has an extra 19 pixels in Internet Explorer? I've given the fieldset a width and height so it hasLayout, hope this helps. body{ color:#171717; font:1em/1.125em Georgia,serif; margin:0; padding:0; } /* */ fieldset{ background:fuchsia; border:0 solid green; border-width:0.0625em 0; height:19.125em; margin:0 0 1.125em; padding:3.3125em 1.125em 1.0625em; position:relative; width:31.5em; } /* */ form dl{ margin:0; } form dl dd{ /* */ height:2.25em; margin:0 0 1.125em; position:relative; /* */ } form dl dt{ margin:0 0 1.125em; } /* */ form dl dt+dd+dt+dd{ height:7.875em; } /* */ form dl+div{ line-height:2.25em; /* */ margin:0; padding:0; /* */ } h3{ color:#701; font:bold 1em/1.125em Helvetica,Arial,serif; margin:0 0 1.125em; text-transform:uppercase; } input[type=text]{ border:0.0625em solid #171717; font:1em/1.125em Georgia,serif; height:1.125em; margin:0; padding:0.5em 1.0625em; /* */ position:absolute; top:0; /* */ } /* */ legend{ background:aqua; margin:1.0625em 0 1.125em; padding:0; position:absolute; top:0; } /* */ p{ background:lime; margin:0 0 1.125em; } textarea{ border:0.0625em solid #171717; font:1em/1.125em Georgia,serif; height:6.75em; margin:0; padding:0.5em 1.0625em; /* */ position:absolute; top:0; /* */ } .Address{ margin:0 0 1.125em; } .Address dd{ margin:0; } .Address dt{ display:none; } .Address dt+dd+dt+dd{ display:inline; } .Address dt+dd+dt+dd+dt+dd+dt+dd{ display:block; text-transform:uppercase; } .Bad{ background:#dbb; color:#901; } .Calendar{ list-style:none; margin:0; padding:0; } .Calendar dd{ background:#701; font:bold 0.5625em/2em Helvetica,Arial,serif; margin:0; text-align:center; text-transform:uppercase; } .Calendar dl{ border:0 solid #111; border-width:0.0625em 0.125em 0.125em 0.0625em; float:left; margin:-0.0625em 1em 1em 1.0625em; width:3.375em; } .Calendar dt{ display:none; } .Calendar dt+dd+dt+dd{ background:#fff; color:#171717; font:1em/2.25em Georgia,serif; margin:0; } .Calendar h4{ float:right; font:1em/1.125em Georgia,serif; margin:0 0 1.125em; width:10.125em; } .Calendar li{ clear:both; } .Calendar p{ float:right; font:1em/1.125em Georgia,serif; width:10.125em; } .Good{ background:#bdb; color:#091; } .Left{ float:left; margin:0 0.5625em 0 1.125em; } .Message{ border-style:solid; border-width:0.0625em; margin:0 0 1.125em; padding:1em 1.0625em 0; } .Message p{ margin:0 0 1.0625em; padding:0.0625em 0 0; } .Narrow{ width:15.75em; } .Narrow input[type=text]{ width:13.5em; } .Right{ float:right; margin:0 1.125em 0 0.5625em; } .Wide{ /* */ background:gray; /* */ width:31.5em; } .Wide input[type=text]{ width:29.25em; } .Wide textarea{ width:29.25em; } .Wrapper{ background:url(../i/grid_w18_h18.png); margin:0 auto; overflow:hidden; padding:1.125em 0 0; position:relative; width:50.625em; } #Blackboard{ background:#171717; color:#fff; margin:1.125em 0 0; min-width:50.625em; } #Blackboard a{ background:#111; color:#fff; } #Blackboard h3{ color:#fff; } #Blackboard div>p{ font:1.5em/1.5em Georgia,serif; } #Footer{ background:#901; clear:both; color:#fff; min-width:50.625em; } #Footer h3{ color:#fff; } #Google_Copilot ol{ padding:0; } #Google_Copilot ol li{ list-style:none; margin:0 0 1.125em; padding:0; /* I.E.7 Fix */ } #Google_Map{ height:23.625em; margin:0 0 1.125em; width:31.5em; } #Google_Query dt{ /* display:none; */ } #Header{ background:#901; min-width:50.625em; } #Header h1{ background:url(../i/the_shropshire_arms_w288_h72.gif) no-repeat 0 2.8125em; font:1em/1.125em serif; height:7.875em; margin:0 0 0 0.5625em; width:18em; } #Header h1 a{ display:none; } #Header h2{ background-color:#933; display:inline; font:1em/2.25em Georgia,serif; left:0; margin:1.125em 0 0 0.5625em; padding:0 0.5625em; position:absolute; top:0; } #Header h2 a{ color:#fff; text-decoration:none; } #Header h2 a span{ text-decoration:underline; } #Header ul{ list-style:none; height:2.25em; margin:0; padding:0; } #Header ul li{ display:inline; /* I.E.7 Fix */ } #Header ul li a{ background:#fff; color:#000; float:left; line-height:2.25em; margin:0 0 0 0.5625em; padding:0 0.5625em; text-decoration:none; } #Header .Wrapper{ background:url(../i/shield_w126_h126.gif) no-repeat 42.1875em 1.6875em; } This post could get stupidly long so I'll provide a link to the Web page rather than post the HTML: http://theshrop.com/d/call_us_or_call_in.php I really appreciate answers and all who contribute, thanks in advance!

    Read the article

  • Any way to turn off quips in OOWeb?

    - by Misha Koshelev
    http://ooweb.sourceforge.net/tutorial.html Not really a question, but I can't seem to stop writing stuff like this. Maybe someone will find it useful. I know rewriting an HTTP server is not the way to turn off the quips ;) /* Copyright 2010 Misha Koshelev. All Rights Reserved. */ package com.mksoft.common; import java.io.BufferedReader; import java.io.InputStreamReader; import java.io.IOException; import java.io.PrintWriter; import java.io.UnsupportedEncodingException; import java.net.URLDecoder; import java.text.SimpleDateFormat; import java.util.Date; import java.util.LinkedHashMap; import java.net.ServerSocket; import java.net.Socket; /** * Simple HTTP Server. * * @author Misha Koshelev */ public class HttpServer extends Thread { /* * Constants */ /** * 404 Not Found Result */ protected final static String result404NotFound="<html><head><title>404 Not Found</title></head><body bgcolor='#ffffff'><h1>404 Not Found</h1></body></html>"; /* * Variables */ /** * Port on which HTTP server handles requests. */ protected int port; public int getPort() { return port; } public void setPort(int _port) { port=_port; } /* * Constructors */ public HttpServer(int _port) { setPort(_port); } /* * Helpers */ /** * Errors */ protected void error(String message) { System.err.println(message); System.err.flush(); } /** * Debugging */ protected boolean debugOutput=true; protected void debug(String message) { if (debugOutput) { error(message); } } /** * Lock object */ private Object lock=new Object(); /** * Should we quit? */ protected boolean doQuit=false; /** * Are we done? */ protected boolean areWeDone=false; /** * Process POST request headers */ protected String processPostRequest(String url,LinkedHashMap<String,String> headers,String inputLine) { debug("HttpServer.processPostRequest: url=\""+url); if (debugOutput) { for (String key: headers.keySet()) { debug("HttpServer.processPostRequest: headers."+key+"=\""+headers.get(key)+"\""); } } debug("HttpServer.processPostRequest: inputLine=\""+inputLine+"\""); try { inputLine=new URLDecoder().decode(inputLine,"UTF-8"); } catch (UnsupportedEncodingException uee) { uee.printStackTrace(); } String[] keyValues=inputLine.split("&"); LinkedHashMap<String,String> post=new LinkedHashMap<String,String>(); for (int i=0;i<keyValues.length;i++) { String keyValue=keyValues[i]; int equals=keyValue.indexOf('='); String key=keyValue.substring(0,equals); String value=keyValue.substring(equals+1); post.put(key,value); } return post(url,headers,post); } /** * Server loop (here for exception handling purposes) */ protected void serverLoop() throws IOException { /* Start server socket */ ServerSocket serverSocket=null; try { serverSocket=new ServerSocket(getPort()); } catch (IOException ioe) { ioe.printStackTrace(); System.exit(1); } Socket clientSocket=null; while (true) { /* Quit if necessary */ if (doQuit) { break; } /* Accept incoming connections */ try { clientSocket=serverSocket.accept(); } catch (IOException ioe) { ioe.printStackTrace(); System.exit(1); } /* Read request */ BufferedReader in=null; String inputLine=null; String firstLine=null; String blankLine=null; LinkedHashMap<String,String> headers=new LinkedHashMap<String,String>(); try { in=new BufferedReader(new InputStreamReader(clientSocket.getInputStream())); while (true) { if (blankLine==null) { inputLine=in.readLine(); } else { /* POST request, read Content-length bytes */ int contentLength=new Integer(headers.get("Content-Length")).intValue(); StringBuilder sb=new StringBuilder(contentLength); for (int i=0;i<contentLength;i++) { sb.append((char)in.read()); } inputLine=sb.toString(); break; } if (firstLine==null) { firstLine=inputLine; } else if (blankLine==null) { if (inputLine.equals("")) { if (firstLine.startsWith("GET ")) { break; } blankLine=inputLine; } else { int colon=inputLine.indexOf(": "); String key=inputLine.substring(0,colon); String value=inputLine.substring(colon+2); headers.put(key,value); } } } } catch (IOException ioe) { ioe.printStackTrace(); } /* Process request */ String result=null; firstLine=firstLine.replaceAll(" HTTP/.*",""); if (firstLine.startsWith("GET ")) { result=get(firstLine.replaceFirst("GET ",""),headers); } else if (firstLine.startsWith("POST ")) { result=processPostRequest(firstLine.replaceFirst("POST ",""),headers,inputLine); } else { error("HttpServer.ServerLoop: Unhandled request \""+firstLine+"\""); } debug("HttpServer.ServerLoop: result=\""+result+"\""); /* Send response */ PrintWriter out=null; try { out=new PrintWriter(clientSocket.getOutputStream(),true); } catch (IOException ioe) { ioe.printStackTrace(); } if (result!=null) { out.println("HTTP/1.1 200 OK"); } else { out.println("HTTP/1.0 404 Not Found"); result=result404NotFound; } Date now=new Date(); out.println("Date: "+new SimpleDateFormat("EEE, d MMM yyyy HH:mm:ss z").format(now)); out.println("Content-Type: text/html; charset=UTF-8"); out.println("Content-Length: "+result.length()); out.println(""); out.print(result); /* Clean up */ out.close(); if (in!=null) { in.close(); } clientSocket.close(); } serverSocket.close(); areWeDone=true; synchronized(lock) { lock.notifyAll(); } } /* * Methods */ /** * Run server on port specified in constructor. */ public void run() { try { serverLoop(); } catch (IOException ioe) { ioe.printStackTrace(); System.exit(1); } } /** * Process GET request (should be overwritten). */ public String get(String url,LinkedHashMap<String,String> headers) { debug("HttpServer.get: url=\""+url+"\""); if (debugOutput) { for (String key: headers.keySet()) { debug("HttpServer.get: headers."+key+"=\""+headers.get(key)+"\""); } } if (url.equals("/")) { return "<html><head><title>HttpServer GET Test Page</title></head>\r\n"+ "<body bgcolor='#ffffff'>\r\n"+ "<center><h1>HttpServer GET Test Page</h1></center>\r\n"+ "<hr />\r\n"+ "<center><table>\r\n"+ "<form method='post' action='/'>\r\n"+ "<tr><td align=right>Test 1:</td>\r\n"+ " <td><input type='text' name='text 1' value='test me !!! !@#$'></td></tr>\r\n"+ "<tr><td align=right>Test 2:</td>\r\n"+ " <td><input type='text' name='text 2' value='type smthng'></td></tr>\r\n"+ "<tr><td>&nbsp;</td>\r\n"+ " <td align=right><input type='submit' value='Submit'></td></tr>\r\n"+ "</form>\r\n"+ "</table></center>\r\n"+ "<hr />\r\n"+ "<center><a href='/quit'>Shutdown Server</a></center>\r\n"+ "</html>"; } else if (url.equals("/quit")) { quit(); return ""; } else { return null; } } /** * Process POST request (should be overwritten). */ public String post(String url,LinkedHashMap<String,String> headers,LinkedHashMap<String,String> post) { debug("HttpServer.post: url=\""+url+"\""); if (debugOutput) { for (String key: headers.keySet()) { debug("HttpServer.post: headers."+key+"=\""+headers.get(key)+"\""); } } if (url.equals("/")) { String result="<html><head><title>HttpServer Post Test Page</title></head>\r\n"+ "<body bgcolor='#ffffff'>\r\n"+ "<center><h1>HttpServer Post Test Page</h1></center>\r\n"+ "<hr />\r\n"+ "<center><table>\r\n"+ "<tr><th>Key</th><th>Value</th></tr>\r\n"; for (String key: post.keySet()) { result+="<tr><td align=right>"+key+"</td><td align=left>"+post.get(key)+"</td></tr>\r\n"; } result+="</table></center>\r\n"+ "</html>"; return result; } else { return null; } } /** * Wait for server to quit. */ public void waitForCompletion() { while (areWeDone==false) { synchronized(lock) { try { lock.wait(); } catch (InterruptedException ie) { } } } } /** * Shutdown server. */ public void quit() { doQuit=true; } }

    Read the article

  • how can i have a working dropdownlist with links from a csv in php

    - by Mark Dekker
    I have a website that loads a CSV, divides it into parts, and shows these parts. There are 7 parts, and since it is for a music store it is sliced like this: the name of the product the subname the price the stock in one shop the stock of the other shop the group name the brandname What i have now is that it shows 12 products on 1 page, with a next and previous link on top of the page. The pages are made with the group name, every group has it's own page, so you have a drums page, guitar page, speaker page. That all works great. What i programmed in there is a dropdownlist, it drops down a list of brandnames, which should narrow the search for a person who is looking at the products. Problem is right now, that the dropdown menu works, i see the brands, but they are NONE clickable, only the brands that are currently on the page are shown, so NOT all the brands from that group are shown, only the 12 that are currently showing, when you press next, it shows 12 more brands, but i want them to be shown right on the start. And the third problem is, when it is showing the brands, it shows them double or triple, depending on how many products have the same brand. Is there a way what i want, with this code as a basis ? <html> <body bgcolor=#E2E965 link=black vlink=black alink=black text=#D5DF23> <style type="text/css"> #nav, #nav ul { padding: 0; margin: 0; list-style: none; } #nav li { float: left; width: 120px; } #nav ul { position: absolute; width: 120px; left: -1000px; } #nav li:hover ul { left: auto; } <!-- a {text-decoration:none} //--> body { scrollbar-arrow-color: #E2E965; scrollbar-face-color: #D7182A; scrollbar-highlight-color: #000000; scrollbar-3dlight-color: #D6DF23; scrollbar-shadow-color: #00000; scrollbar-darkshadow-color: #00000; scrollbar-track-color: #D6DF23; } input:link {text-decoration: none; color: #E2E965;} input:visited {text-decoration: none; color: #E2E965;} input:active {text-decoration: none; color: #E2E965;} .spacer_black { margin: 0px; padding: 0px; border: 5px; height: 2px; width: 100%; line-height: 0px; font-size: 0px; background-color: #000000;} </style> <table width=800 border=0><td> </html> <?PHP $offset = isset($_GET['offset'])?$_GET['offset']:0; $LinesToDisplay = 12; $row = $offset + $LinesToDisplay; $row2 = $offset - $LinesToDisplay; $file_handle = fopen("web.txt", "rb"); error_reporting( E_ALL ); // DEBUGGING $SelectArray=array(); while ((($parts = fgetcsv($file_handle,4096,"|")) !== FALSE) && ($LinesToDisplay > 0) && (!feof($file_handle))) { //new code //skip first $offset lines $num = count($parts[6]); $SelectArray[]=$parts[6]; if ($parts[5] == 9999) { if ($offset-- > 0) {continue;} $parts[0] = ucwords(strtolower($parts[0])); $parts[1] = ucwords(strtolower($parts[1])); ?> <td> <?php echo "<table BACKGROUND='background.jpg' border=0 width=250><td width='243' height='105'>"; echo "<font size=-1 face='helvetica' color=#812990><b>$parts[0]</b></font>"; echo "<i>"; ?> <html> <div onMouseOver="this.style.color = 'black';" onMouseOut="this.style.color = '#D5DF23';"> </html><?php echo "<font size=2>-$parts[1]</font>"; echo "</div></i>"; ?><html><a href="#" title="Koop nu de <?php echo $parts[0]; ?>" onClick="window.open('form.php?p=<?php echo urlencode($parts[0]); ?>','popuppage','width=400,height=400,top=250,left=250,resizable=0,statusbar=0,titlebar=yes,toolbar=no,scrollbars=no,location=no,directories=no');"> <div><img src='ster.jpg' border=0 width='46' align='right'></a> <a href="#"><img src='envelope.jpg' border=0 width='46' align='right'title="Heeft u een vraag over <?php echo $parts[0]; ?>" onClick="window.open('vraag.php?p=<?php echo urlencode($parts[0]); ?>','popuppage','width=400,height=400,top=250,left=250,resizable=0,statusbar=0,titlebar=yes,toolbar=no,scrollbars=no,location=no,directories=no');"> <div></a> <TABLE BORDER='0' cellpadding='0' CELLSPACING='0'> <TR> <TD WIDTH='70' HEIGHT='20' BACKGROUND='pricebackground.jpg' VALIGN='bottom'> <center> <font size=2 color=white face='helvetica'> <b></html> <?php echo "€ $parts[2]"; ?> </b> </td> </tr> </table> <?php echo "<b><font size=3 color=#D7182A>Op Voorraad In:<br></font>"; echo ("<font color=black> Amsterdam </font>"); if ( $parts[3] >= 1 ) echo ("<IMG SRC =green.gif>").""; if ( $parts[3] <= 0 ) echo ("<IMG SRC =red.gif>").""; echo ("<font color=black> Utrecht </font>"); if ( $parts[4] >= 1 ) echo ("<IMG SRC =green.gif>")."</td></table></b><p style='margin:9px;'>"; if ( $parts[4] <= 0 ) echo ("<IMG SRC =red.gif>")."</td></table></b><p style='margin:9px;'>"; $LinesToDisplay--; if ($LinesToDisplay/3==intval($LinesToDisplay/3)) { echo "<tr><td>"; } }} fclose($file_handle); ?> <tr align=right> <select style="background-color: #FFFFFF; color: #000000; font-family: Arial; font-weight: none; font-size: 12; width: 150px; "> <?php $i=1; foreach ($SelectArray as $val){ echo "<option value=\"$i\">$val</option>\n"; $i++; } ?> </select> <font color=black><body alink=black vlink=black link=black text=black> <center><a href="occasiona.php?offset=<?php echo $row2; ?>" align=center>&laquo; previous</a> || <a href="occasiona.php?offset=<?php echo $row; ?>">next &raquo;</a></table></html>

    Read the article

  • Any way to recover ext4 filesystems from a deleted LVM logical volume?

    - by Vegar Nilsen
    The other day I had a proper brain fart moment while expanding a disk on a Linux guest under Vmware. I stretched the Vmware disk file to the desired size and then I did what I usually do on Linux guests without LVM: I deleted the LVM partition and recreated it, starting in the same spot as the old one, but extended to the new size of the disk. (Which will be followed by fsck and resize2fs.) And then I realized that LVM doesn't behave the same way as ext2/3/4 on raw partitions... After restoring the Linux guest from the most recent backup (taken only five hours earlier, luckily) I'm now curious on how I could have recovered from the following scenario. It's after all virtually guaranteed that I'll be a dumb ass in the future as well. Virtual Linux guest with one disk, partitioned into one /boot (primary) partition (/dev/sda1) of 256MB, and the rest in a logical, extended partition (/dev/sda5). /dev/sda5 is then setup as a physical volume with pvcreate, and one volume group (vgroup00) created on top of it with the usual vgcreate command. vgroup00 is then split into two logical volumes root and swap, which are used for / and swap, logically. / is an ext4 file system. Since I had backups of the broken guest I was able to recreate the volume group with vgcfgrestore from the backup LVM setup found under /etc/lvm/backup, with the same UUID for the physical volume and all that. After running this I had two logical volumes with the same size as earlier, with 4GB free space where I had stretched the disk. However, when I tried to run "fsck /dev/mapper/vgroup00-root" it complained about a broken superblock. I tried to locate backup superblocks by running "mke2fs -n /dev/mapper/vgroup00-root" but none of those worked either. Then I tried to run TestDisk but when I asked it to find superblocks it only gave an error about not being able to open the file system due to a broken file system. So, with the default allocation policy for LVM2 in Ubuntu Server 10.04 64-bit, is it possible that the logical volumes are allocated from the end of the volume group? That would definitely explain why the restored logical volumes didn't contain the expected data. Could I have recovered by recreating /dev/sda5 with exactly the same size and disk position as earlier? Are there any other tools I could have used to find and recover the file system? (And clearly, the question is not whether or not I should have done this in a different way from the start, I know that. This is a question about what to do when shit has already hit the fan.)

    Read the article

< Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >