Search Results

Search found 22893 results on 916 pages for 'client scripting'.

Page 466/916 | < Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >

• Server side aggregation using Spring MVC Controllers

  - by Venu

  Hi! We have a web site with multiple pages each with lot of AJAX calls. All the Ajax calls go to a data proxy layer written in Spring 3 MVC application. In order to reduce the load on the server we are planning to aggregate calls on the client and send to the proxy layer. For ex: we have two calls /controller1/action1 and /controller2/action2 in different controllers. I want to write an aggregate controller and call it from the client instead of making two calls to the individual controllers. Something like /aggregatecontroller/aggregate (and we will post the information regarding which calls are being aggregated and required parameters). Is there any way we can call another controller/action from a controller/action and get output? The flow will be something like this: a. Call /aggregatecontroller/aggregate with info regd call1 and call2 b. aggregate action understands that it needs to aggregate call1 and call2 c. it calls /controller1/action1 and gets the response d. it calls /controller2/action2 and gets the response e. it merges both in a json response and sends it back to browser. Please let me know if you have any suggestion regd how to do this or if you think there is a better approach to do the server side aggregation. Thanks for your time.

  Read the article

• MouseListener fired without checking JCheckBox

  - by Morinar

  This one is pretty crazy: I've got an AppSight recording (for those not familiar, it's a recording of what they did including keyboard/mouse input + network traffic, etc) of a customer reproducing a bug. Basically, we've got a series of items listed on the screen with JCheckBox-es down the left side. We've got a MouseListener set for the JPanel that looks something like this: private MouseAdapter createMouseListener() { return new MouseAdapter(){ public void mousePressed( MouseEvent e ) { if( e.getComponent() instanceof JCheckBox ) { // Do stuff } } }; } Based on the recording, it appears very strongly that they click just above one of the checkboxes. After that, it's my belief that this listener fired and the "Do stuff" block happened. However, it did NOT check the box. The user then saw that the box was unchecked, so they clicked on it. This caused the "Do stuff" block to fire again, thus undoing what it had done the first time. This time, the box was checked. Therefore, the user thinks that the box is checked, and it looks like it is, but our client thinks that the box is unchecked as it was clicked twice. Is this possible at all? For the life of me, I can't reproduce it or see how it could be possible, but based on the recording and the data the client sent to the server, I can't see any other logical explanation. Any help, thoughts, and or ideas would be much appreciated.

  Read the article

• Push, parse & import "selected" data, text, info blobs from Webpages/ Emails as Event/ Appointment to standard Calendar directly or as .ics file?

  - by Alex S

  Any tool, plugin, extension, script/ code to push "selected" data, text, information blobs from Web pages, Emails etc, then parsed and imported to structured Event, Appointment (e.g. .ics) on a standard Calendar like Outlook, Google, iCal? If not, what and how could I use some scripting, coding or existing tools, extensions to add on top and do this. I come across a lot of unstructured information on Webpages, Emails, FB events etc. where I just want to add that information to my Calendar. Instead of entering all the information by hand all the time, there should be an easy enough way to have the information get parsed, organized and imported to a Calendar... Either directly to a calendar from source or Translated to a standard format such as .ICS that can be imported & saved easily. Would love to see some suggestions for this incorporating one or more of the following: on Windows with Chrome & Outlook on iPhone/ iPad to its Calendar PS: I'll come back and see if I can add more information to this question and to answer it as well. I have not found a solution yet.

  Read the article

• Random problem connecting to MySQL

  - by CharlesLeaf

  Environment: RHEL 5 servers, MySQL 5.1.43, PHP 5.1.6 (using MySQLi). Currently only available within our internal VPN network. Servers ServerA: Webserver ServerB/C/D: Database server (1 master 2 slaves) The error (on ServerA) [Tue May 25 11:12:17 2010] [error] [client CLIENTIP] PHP Warning: mysqli::real_connect() [function.mysqli-real-connect]: (HY000/2003): Can't connect to MySQL server on 'ServerB' (4) in /home/**/Database.php on line 67, referer: [website] Problem description It appears that at completely random times, our website is unable to connect to one of the MySQL servers - usually the Master. Except for the forementioned error message, there is nothing to be found in any of the logs as far as I can see, and most of the times the connection is succesful and everything works as it should. It's just at completely random times, this error pops up. There's no firewall blocking any internal traffic, timeout value is 3 but it doesn't take 3 seconds before it fails to connect. With the default mysql client I can connect from ServerA to ServerB,C and D and haven't encountered a problem yet. Does anyone have a clue what I might be overlooking / could be the problem? Because I've run out of ideas myself.

  Read the article

• Invalid Argument javascript error only on certain computers

  - by Jen

  Getting an error whenever we click a particular button/link on our site. It is generating a javascript "Invalid Argument" error. I know in the other posts it is typically because it is a syntax error in the javascript however it only just seems to have started happening and it doesn't happen on all pcs. ie. in our client's environment if I remote onto their web server and view the uat website I get the javascript error. If I remote onto their sql server and view the uat website I don't get the javascript error. If it was a syntax error then I would always get the error wouldn't I? both browsers are the same version of IE6 (yeah I know...) :) I have tried deleting temporary internet files - including viewing the files and deleting them myself - but no joy. client uses citrix.. and they're all getting the error :( Any ideas would be appreciated - Thanks! :) Update - Sorry I haven't posted specific code as there is too much to post (and I'm not sure where the error is occurring). The "button" launches a new window which in turn opens up a couple of aspx pages and calls lots of javascript. So the window opens ok, and there's a function that gets called to resize the window - but before it calls the resizing of the window/content it throws the invalid argument error. Am busy trying to get alerts to trigger to see if I can see where it's falling over but so far no luck. Again not sure why this error doesn't occur when I use a particular PC (same browser version)

  Read the article

• Phonegap Android application exiting - but not really - when home button is pressed

  - by Lucas T

  I have created an Phonegap 1.5/Android application. My client reports that, when he leaves the app using the Home button, and then relaunches it using the app icon, the app relaunches from the start instead of resuming. However, when he holds the home button, the app appears in the running apps, and when he accesses the app through this menu, the app resumes in the expected way. I thought this could be linked to the app being automatically closed by the OS due to a lack of memory, but if that was the case the app shouldn't appear in the running apps. I could not reproduce the bug on my Sony Ericsson XPERIA with Android 2.3.4, the client has experienced this behaviour on a Motorola Defy and on another phone (i'll add the reference of the other phone and the OS versions as soon as I get them). The initialization process of the app is declared this way : window.addEventListener('load', function(){ document.addEventListener('deviceready', _onDeviceReady, false); }, false); Could this be fixed by attaching the processes to other events (although I doubt it, the app really seems to be relaunched from the start) ? Is there a declaration to make in the Android Manifest to prevent this behavior ? Is that a known bug in some Android phones/versions ?

  Read the article

• Constructor on type: "Namespace.type" not found.

  - by Nick

  Hello, I am using Castle.Windsor as an IOC. So I am trying to resolve a service type in the constructor of an HTTPHandler. I keep receiving this error, "Constructor on type: "Namespace.type" not found." My configuration has the following entries for service type: IDocumentDirectory <component id="restricted.content.directory" service="org.healthwise.foundations.services.content.IDocumentDirectory, org.healthwise.foundations.services" type="org.healthwise.foundations.services.content.RestrictedLocalizationDocumentDirectory, org.healthwise.foundations.services"> <parameters> <contentDirectory>${content.directory}</contentDirectory> <localizations> <array> <item>en-us</item> <item>es-us</item> </array> </localizations> </parameters> </component> <component id="content.directory" service="org.healthwise.foundations.services.content.IDocumentDirectory, org.healthwise.foundations.services" type="org.healthwise.foundations.services.web.client.WebServiceDocumentDirectory, org.healthwise.foundations.services.web.client"> <parameters> <webServiceURL>#{contentDirectoryWebsiteUrl}</webServiceURL> </parameters> </component> In my new handler the constructor looks like this: public HeartBeatHttpHandler(IDocumentDirectory contentDirectory) { _contentDirectory = contentDirectory; } I have never recieved this error using Castle.Windsor. Can someone explain? Thanks!

  Read the article

• CXF code first service, WSDL generation; soap:address changes?

  - by jcalvert

  I have a simple Java interface/implementation I am exposing via CXF. I have a jaxws element in my Spring configuration file like this: <jaxws:endpoint id="managementServiceJaxws" implementor="#managementService" address="/jaxws/ManagementService" > </jaxws:endpoint> It generates the WSDL from my annotated interface and exposes the service. Then when I hit http://myhostname/cxf/jaxws/ManagementService?wsdl I get a lovely WSDL. At the bottom in the wsdl:service element, I'll see <soap:address location="http://myhostname/cxf/jaxws/ManagementService"/> However, some time a day or so later, with no application restart, hitting that same url produces: This causes a number of problems, but what I really want is to fix it. Right now, there's a particular client to the webservice that sets the endpoint to localhost; because it runs on the same machine. Is it possible the wsdl is getting regenerated and cached and then exposing the 'localhost' version? In part I don't know the exact mechanism by which one goes from a ?wsdl request in CXF to the response. It seems almost certain that it's retrieving some cached version, given that it's supposed to be determining the address by asking the servletcontainer (Jetty). For reference I know a stopgap solution is using the hostname on the client and making sure an alias in place so that it goes over the loopback. EDIT: For reference, I confirmed that if I bring my application up and first hit it over localhost, then querying for the wsdl via the hostname shows the address as localhost. Conversely, first hitting it over the hostname causes localhost requests to show the hostname. So obviously something is getting cached here.

  Read the article

• Compiling my Boost/NTL program with c++ on Linux.

  - by Martin Lauridsen

  Hi SO, I wrote a client program and a server program, that uses the NTL library and Boost::Asio, to do client/server communication for an integer factorization application, in C++. Both sides consist of several headers and cpp files. Both project compile fine individually on Windows in Visual Studio. All I did, was add the include path of NTL and Boost to both projects: Additional include paths: "D:\Downloads\WinNTL-5_5_2\include";D:\boost_1_42_0 Furthermore, for both projects, I added the two library paths to both projects in VS: Additional library directories: D:\boost_1_42_0\stage\lib;"D:\Documents\Visual Studio 2008\Projects\ntl\Debug" And added under Additional dependencies: ntl.lib As said, it compiles fine on Windows. But when I put the code on a Linux machine provided by university, I try to compile with the following statement c++ -I/appl/htopopt/Linux_x86_64/NTL-5.4.2/include -I/appl/htopopt/Linux_x86_64/boost_1_43_0/include client_protocol.cpp mpqs_client.cpp mpqs_sieve.cpp mpqs_helper.cpp -o mpqs_helper -L/appl/htopopt/Linux_x86_64/NTL-5.4.2/lib -lntl -L/appl/htopopt/Linux_x86_64/gmp-4.2.1/lib -lgmp -lm -L/appl/htopopt/Linux_x86_64/boost_1_43_0/lib -lboost_system -static Upon doing this, I get a huuuge error, which I posted here. Any idea how to fix this, please??

  Read the article

• How can I map to a field that is joined in via one of three possible tables

  - by Mongus Pong

  I have this object : public class Ledger { public virtual Person Client { get; set; } // .... } The Ledger table joins to the Person table via one of three possible tables : Bill, Receipt or Payment. So we have the following tables : Ledger LedgerID PK Bill BillID PK, LedgerID, ClientID Receipt ReceiptID PK, LedgerID, ClientID Payment PaymentID PK, LedgerID, ClientID If it was just the one table, I could map this as : Join ( "Bill", x => { x.ManyToOne ( ledger => ledger.Client, mapping => mapping.Column ( "ClientID" ) ); x.Key ( l => l.Column ( "LedgerID" ) ); } ); This won't work for three tables. For a start the Join performs an inner join. Since there will only ever be one of Bill, Receipt or Payment - an inner join on these tables will always return zero rows. Then it would need to know to do a Coalesce on the ClientID of each of these tables to know the ClientID to grab the data from. Is there a way to do this? Or am I asking too much of the mappings here?

  Read the article

• BackgroundWorker Help needed

  - by ChrisMuench

  I have code that does a web-service request. While doing this request I need a progress-bar to be moving independently. My problem is that I just need to say run a progress update every 1 or 2 seconds and check to see if progress of the request has been completed. NetBasisServicesSoapClient client = new NetBasisServicesSoapClient(); TransactionDetails[] transactions = new TransactionDetails[dataGridView1.Rows.Count - 1]; for (int i = 0; i < dataGridView1.Rows.Count - 1; i++) { transactions[i] = new TransactionDetails(); transactions[i].TransactionDate = (string)dataGridView1.Rows[i].Cells[2].Value; transactions[i].TransactionType = (string)dataGridView1.Rows[i].Cells[3].Value; transactions[i].Shares = (string)dataGridView1.Rows[i].Cells[4].Value; transactions[i].Pershare = (string)dataGridView1.Rows[i].Cells[5].Value; transactions[i].TotalAmount = (string)dataGridView1.Rows[i].Cells[6].Value; } CostbasisResult result = client.Costbasis(dataGridView1.Rows[0].Cells[0].Value.ToString(), dataGridView1.Rows[0].Cells[1].Value.ToString(), transactions, false, "", "", "FIFO", true); string result1 = ConvertStringArrayToString(result.Details);

  Read the article

• Threadpool design question

  - by ZeroVector

  I have a design question. I want some feedback to know if a ThreadPool is appropriate for the client program I am writing. I am having a client running as a service processing database records. Each of these records contains connection information to external FTP sites [basically it is a queue of files to transfer]. A lot of them are to the same host, just moving different files. Therefore, I am grouping them together by host. I want to be able to create a new thread per host. I really don't care when the transfers finish, they just need to do all the work (or try to do) they were assigned, and then terminate once they are finished, cleaning up all resources they used in the process. I anticipate no more than 10-25 connections to be established. Once the transfer queue is empty, the program will simply wait until there are records in the queue again. Is the ThreadPool a good candidate for this or should I use a different approach? Edit: For the most part, this is the only significant custom application running on the server.

  Read the article

• IE7 & IE8 error executing function with ajax

  - by Yahreen

  I am loading an ajax page which executes an HTML5 video player script. The function for the Flash fallback is html5media(); : //Load 1st Case Study $("#splash").live('click', function (e) { $(this).fadeOut('slow', function () { $('#case-studies').load('case-study-1.html', function() { html5media(); //initiate Flash fallback }).fadeIn(); }); e.preventDefault(); }); This initial page load works fine in IE7 & IE8. The problem is once this page is loaded, there are links to 4 more videos which are loaded in again using ajax. I use this function: //Switcher function csClients(url, client) { $("#case-studies").fadeOut('slow', function() { $('#case-studies').load(url, function () { html5media(); //initiate Flash fallback }).fadeIn(); }); } //Page Loader $("#cs-client-list li.client1 a").live('click', function(e) { csClients('case-study-1.html', 'client1'); e.preventDefault(); }); Originally I was using return false; but none of the sub-page Flash videos would load in IE7. When I switched to preventDefault, the videos loaded in IE7 but still not in IE8. I also get a weird error in both IE7 & IE8 with no helpful feedback: Error on Page: Unspecified error. / (Line 49) Code: 0 (Char 5) URI: http://www.mysite.com This is line 49 in my index page: <section id="case-studies" class="main-section"> I have a feeling it has to do with calling html5media(); too many times? At a loss...

  Read the article

• deserializing multiple types from a stream

  - by clanier9

  I have a card game program, and so far, the chat works great back and forth over the TCPClient streams between host and client. I want to make it do this with serializing and deserializing so that I can also pass cards between host and client. I tried to create a separate TCPClient stream for the passing of cards but it didn't work and figured it may be easier to keep one TCPClient stream that gets the text messages as well as cards. So I created a class, called cereal, which has the properties for the cards that will help me rebuild the card from an embedded database of cards on the other end. Is there a way to make my program figure out whether a card has been put in the stream or if it's just text in the stream so I can properly deserialize it to a string or to a cereal? Or should I add a string property to my cereal class and when that property is filled in after deserializing to the cereal, i'll know it's just text (if that field is empty after deserializing i'll know it's a card)? I'm thinking a try catch, where it tries to deserialize to a string, and if it fails it will catch and cast as a cereal. Or am I just way off base with this and should choose another route? I'm using visual studio 2011, am using a binaryformatter, and am new to serializing/deserializing.

  Read the article

• How to get Amazon s3 PHP SDK working?

  - by JakeRow123

  I'm trying to set up s3 for the first time and trying to run the sample file that comes with the PHP sdk that creates a bucket and attempts to upload some demo files to it. But this is the error I am getting: The difference between the request time and the current time is too large. I read on another question on SO that this is because Amazon determines a valid request by comparing the times between the server and the client, that the 2 must be within a 15 min span of one another. Now here is the problem. My laptop's time is 12:30AM June 8, 2012 at the moment. On my server I created a file called servertime.php and placed this code in that file: <?php print strftime('%c'); ?> and the output is: Fri Jun 8 00:31:22 2012 It looks like the day is correct but I don't know what to make of 00:31:22. In any case, how is it possible to always make sure the time between the client and server is within a 15 minute window of one another. What if I have a user in China who wishes to upload a file on my site which uses s3 for the cdn. Then the time difference would be over a day. How can I make sure all my user's times are within 15 minutes of my server time? What if the user is in the U.S. but the time on their machine is misconfigured. Basically how to get s3 bucket creation and upload to work?

  Read the article

• How to use JSF h:messages better?

  - by gurupriyan.e

  My Objective is to use h:messages to convey user - error and confirmation messages.The CSS styles to show these two different messages are different, In fact I would like to use an image beside the confirmation message. for Eg: <tr> <td><img/></td><td><h:msg></td> </td>. So I tried to add messages to the Faces Context based on 2 different client ids <tr> <td height="5"> <h:messages style="color:darkred" id="error_message" /> </td> </tr> <tr> <td width="89%" class="InfoMsg" align="center"> <h:messages id="confirm_message" /> </td> </tr> and in the java layer FacesMessage facesMessage = new FacesMessage(Constants.saveMessageConfirm); FacesContext.getCurrentInstance().addMessage(Constants.STATIC_CONFIRM_MSG_CLIENT_ID, facesMessage); But, even if i add messages to client Id confirm_message - and only to confirm_message - and not to error_message - The message is shown twice in 2 different styles (refer the HTML above) 2 Questions : 1) What is the problem here? 2) If I want to show the image inside a td in the second tr and conditionaly show that second tr when confirm messages are present - what is the best way? Thanks,

  Read the article

• How to send KeyEvents through an input method service to a Dialog, or a Spinner menu?

  - by shutdown11

  I'm trying to implement an input method service that receives intents sent by a remote client, and in response to those sends an appropriate KeyEvent. I'm using in the input method service this method private void keyDownUp(int keyEventCode) { getCurrentInputConnection().sendKeyEvent( new KeyEvent(KeyEvent.ACTION_DOWN, keyEventCode)); getCurrentInputConnection().sendKeyEvent( new KeyEvent(KeyEvent.ACTION_UP, keyEventCode)); } to send KeyEvents as in the Simple Sofykeyboard Sample, and it works in the home, in Activities... but it doesn't works when a Dialog or the menu of a Spinner is in foreground. The events is sent to the parent activity behind the Dialog. Is there any way to send keys and control the device like using the hardware keys from an input method? Better explanation on what I'm trying to do: I am kind of writng an Input Method that allows to control the device from remote. I write in a client (a java application on my desktop pc) a command (for example "UP"), a server on the device with sendBroadcast() sends the intent with the information, and a receiver in the input method gets it and call keyDownUp with the keycode of the DPAD_UP key. It generally works, but when I go to an app that shows a dialog, the keyDownUp method don't sends the key event to the dialog, for example for select the yes or not buttons, but it keeps to control the activty behind the Dialog.

  Read the article

• Javascript Graph Layout Engine

  - by GJK

  I'm looking for a Javascript library/engine that can do graph layouts. (And when I say layouts, I mean logically position vertices nicely.) The graphs I'm working with are all m-ary trees. M is usually no more than 5 or 6, but it can be greater in some cases. I do have something that I use now, Graphviz's node program, and it works perfectly. The problem is, when running a web app, I have to send a request to the server every time I want a layout. Preferably, I would like something written in Javascript that can be quickly run on the client side. All it needs to do is provide layout information (relative positioning and whatnot). I don't need it to draw to a canvas or use SVG or anything, all I'm interested in is the layout. Library use like jQuery or RaphaelJS is fine by me. I'll work with it. I'm just looking for something to speed things along a little. Also, I'd consider writing my own if I could find a nice description of an algorithm to do the layouts. But I really don't want to spend too much time. I have something that works now, so getting it on the client side is just a bonus, not a necessity.

  Read the article

• Creating and parsing huge strings with javascript?

  - by user246114

  Hi, I have a simple piece of data that I'm storing on a server, as a plain string. It is kind of ridiculous, but it looks like this: name|date|grade|description|name|date|grade|description|repeat for a long time this string can be up to 1.4mb in size. The idea is that it's a bunch of student records, just strung together with a simple pipe delimeter. It's a very poor serialization method. Once this massive string is pushed to the client, it is split along the pipes into student records again, using javascript. I've been timing how long it takes to create, and split, these strings on the client side. The times are actually quite good, the slowest run I've seen on a few different machines is 0.2 seconds for 10,000 'student records', which has a final string size of ~1.4mb. I realize this is quite bizarre, just wondering if there are any inherent problems with creating and splitting such large strings using javascript? I don't know how different browsers implement their javascript engines. I've tried this on the 'major' browsers, but don't know how this would perform on earlier versions of each. Yeah looking for any comments on this, this is more for fun than anything else! Thanks

  Read the article

• Android: Having trouble getting html from webpage

  - by Kyle

  Hi, I'm writing an android application that is supposed to get the html from a php page and use the parsed data from thepage. I've searched for this issue on here, and ended up using some code from an example another poster put up. Here is my code so far: HttpClient client = new DefaultHttpClient(); HttpGet request = new HttpGet(url); try { Log.d("first","first"); HttpResponse response = client.execute(request); String html = ""; Log.d("second","second"); InputStream in = response.getEntity().getContent(); Log.d("third","third"); BufferedReader reader = new BufferedReader(new InputStreamReader(in)); Log.d("fourth","fourth"); StringBuilder str = new StringBuilder(); String line = null; Log.d("fifth","fifth"); while((line = reader.readLine()) != null) { Log.d("request line",line); } in.close(); } catch (ClientProtocolException e) { } catch (IOException e) { // TODO Auto-generated catch block Log.d("error", "error"); } Log.d("end","end"); } Like I said before, the url is a php page. Whenever I run this code, it prints out the first first message, but then prints out the error error message and then finally the end end message. I've tried modifying the headers, but I've had no luck with it. Any help would be greatly appreciated as I don't know what I'm doing wrong. Thanks!

  Read the article

• AIX specific socket programming query

  - by kumar_m_kiran

  Hi All, Question 1 From SUSE man pages, I get the below details for socket connect options If the initiating socket is connection-mode, then connect() shall attempt to establish a connection to the address specified by the address argument. If the connection cannot be established immediately and O_NONBLOCK is not set for the file descriptor for the socket, connect() shall block for up to an unspecified timeout interval until the connection is established. If the timeout interval expires before the connection is established, connect() shall fail and the connection attempt shall be aborted. If connect() is interrupted by a signal that is caught while blocked waiting to establish a connection, connect() shall fail and set errno to [EINTR], but the connection request shall not be aborted, and the connection shall be established asynchronously. Question : Is the above contents valid for AIX OS (especially the connection time-out, timed wait ...etc)?Because I do not see it in AIX man pages (5.1 and 5.3) Question 2 I have a client socket whose attributes are a. SO_RCVTIMEO ,SO_SNDTIMEO are set for 5 seconds. b. AF_INET and SOCK_STREAM. c. SO_LINGER with linger on and time is 5 seconds. d. SO_REUSEADDR is set. Note that the client socket is not O_NONBLOCK. Question : Now since O_NONBLOCK is not set and SO_RCVTIMEO and SO_SNDTIMEO is set for 5 seconds, does it mean a. connect in NON Blocking or Blocking? b. If blocking, is it timed blocking or "infinite" time blocking? c. If it is infinite, How do I establish a "connect" system call which is O_BLOCKING with timeout to t secs. Sorry if the questions are be very naive. Thanks in advance for your input.

  Read the article

• How to optimize paging for large in memory database

  - by snakefoot

  I have an application where the entire database is implemented in memory using a stl-map for each table in the database. Each item in the stl-map is a complex object with references to other items in the other stl-maps. The application works with a large amount of data, so it uses more than 500 MByte RAM. Clients are able to contact the application and get a filtered version of the entire database. This is done by running through the entire database, and finding items relevant for the client. When the application have been running for an hour or so, then Windows 2003 SP2 starts to page out parts of the RAM for the application (Eventhough there is 16 GByte RAM on the machine). After the application have been partly paged out then a client logon takes a long time (10 mins) because it now generates a page fault for each pointer lookup in the stl-map. I can see it is possible to tell Windows to lock memory in RAM, but this is generally only recommended for device drivers, and only for "small" amounts of memory. I guess a poor mans solution could be to loop through the entire memory database, and thus tell Windows we are still interested in keeping the datamodel in RAM. I guess another poor mans solution could be to disable the pagefile completely on Windows. I guess the expensive solution would be a SQL database, and then rewrite the entire application to use a database layer. Then hopefully the database system will have implemented means to for fast access. Are there other more elegant solutions ?

  Read the article

• TFS2010 API - Which server event fires when checkin notes are changed?

  - by user3708981

  I've written a TFS plugin that impliments the ISubscribe interface, and creates an external ticket base off of the contents of a check-in note. What I would like to do, if when I go back through older TFS check-ins in VS and edit a check-in note, the plugin would process that event and create an external ticket retroactively. What event / SubscribedType do I need to subscribe to in order for ProcessEvents to fire? My stubbed out code - using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Common; using Microsoft.TeamFoundation.VersionControl.Client; // From C:\Program Files\Microsoft Team Foundation Server 2010\Tools\ using Microsoft.TeamFoundation.Framework.Server; using Microsoft.TeamFoundation.VersionControl.Server; using Changeset = Microsoft.TeamFoundation.VersionControl.Server.Changeset; public class EmbeddedWorkItemEventHandler : ISubscriber { const string EVENT_NAME = "TicketEvent"; const string APP_LOG = "Application"; public Type[] SubscribedTypes() { return new Type[1] { typeof(CheckinNotification) }; // What else do I need here? } public string Name { get { return EVENT_NAME; } } public SubscriberPriority Priority { get { return SubscriberPriority.Normal; } } public EventNotificationStatus ProcessEvent(TeamFoundationRequestContext requestContext, NotificationType notificationType, object notificationEventArgs, out int statusCode, out string statusMessage, out ExceptionPropertyCollection properties) { // Create the event source, if it doesn't exist if (!System.Diagnostics.EventLog.SourceExists(EVENT_NAME)) { System.Diagnostics.EventLog.CreateEventSource(EVENT_NAME, APP_LOG); } statusCode = 0; properties = null; statusMessage = String.Empty; string ErrorLine = ""; try { // Here we'll validate the Ticket name if (notificationType == NotificationType.DecisionPoint && notificationEventArgs is CheckinNotification) { //Check-in blocking logic here. } else if (notificationType == NotificationType.Notification && notificationEventArgs is CheckinNotification) { // Tickets on check-in here. } } Catch { // Error checking } return EventNotificationStatus.ActionPermitted; }

  Read the article

• IN SQL operator in R-Shiny

  - by Piyush

  I am taking multiple selection for component as per below code. selectInput("cmpnt", "Choose Component:", choices = as.character(levels(Material_Data()$CMPNT_NM)),multiple = TRUE) But I am trying to write a sql statement as given below, then its not working. Neither it is throwing any error message. When I was selecting one option at a time (without mutiple = TRUE) then it was working (since I was using "=" operator). But after using "multiple=TRUE" I need to use IN operator, which is not working. Input_Data2 <- fn$sqldf( paste0( "select * from Input_Data1 where MTRL_NBR = '$mtrl1' and CMPNT_NM in ('$cmpnt1')") ) Thanks in advance for any help on this. Thanks jdharrison! Pleasefind the detailed code: # server.R library(RODBC) library(shiny) library(sqldf) Input_Data <- readRDS("InputSource.rds") Mtrl <- factor(Input_Data$MTRL_NBR) Mtrl_List <- levels(Mtrl) shinyServer(function(input, output) { # First UI input (Service column) filter clientData output$Choose_Material <- renderUI({ if (is.null(clientData())) return("No client selected") selectInput("mtrl", "Choose Material:", choices = as.character(levels(clientData()$MTRL_NBR)), selected = input$mtrl ) }) # Second UI input (Rounds column) filter service-filtered clientData output$Choose_Component <- renderUI({ if(is.null(input$mtrl)) return() if (is.null(Material_Data())) return("No service selected") selectInput("cmpnt", "Choose Component:", choices = as.character(levels(Material_Data()$CMPNT_NM)),multiple = TRUE) }) # First data load (client data) clientData <- reactive({ # get(input$Input_Data) return(Input_Data) }) # Second data load (filter by service column) Material_Data <- reactive({ dat <- clientData() if (is.null(dat)) return(NULL) if (!is.null(input$mtrl)) # ! dat <- dat[dat$MTRL_NBR %in% input$mtrl,] dat <- droplevels(dat) return(dat) }) output$Choose_Columns <- renderUI({ if(is.null(input$mtrl)) return() if(is.null(input$cmpnt)) return() colnames <- names(Input_Data) checkboxGroupInput("columns", "Choose Columns To Display The Data:", choices = colnames, selected = colnames) }) output$text <- renderText({ print(input$cmpnt) }) output$data_table <- renderTable({ if(is.null(input$mtrl)) return() if (is.null(input$columns) || !(input$columns %in% names(Input_Data))) return() Input_Data1 <- Input_Data[, input$columns, drop = FALSE] cmpnt1 <- input$cmpnt mtrl1 <- input$mtrl Input_Data2 <- fn$sqldf( paste0( "select * from Input_Data1 where MTRL_NBR = '$mtrl1' and CMPNT_NM in ('$cmpnt1')") ) head(Input_Data2, 10) }) })

  Read the article

• Multiple "ObjectChangeTracker" getting created, can it be avoided?

  - by user555937

  Hi, We are working on a POC where we have following architecture (MVVM), WPF(Client) + WCF + Model(DataAccess)+ ADO.Net Entity Framework 4.0 (with SQL Server 2008 R2 as DB) All are different projects. In the DataAccess layer we have created different Entity Models(edmx) based on the functionality. The tables under perticular flow are grouped and created different entity models. We are using self tracking entities to and fro to communicate with the WPF client through wcf service. For Single model everything works fine. But when we created a Multiple models then few issues started coming. Mutliple models have few duplicate tables/entities. Two probels are, 1) When we try to access entities from different models mutiple objects "ObjectChangeTracker" are getting created. E.g. CompanyModel(edmx) - Company(Entity) - ObjectChangeTracker, ObjectState ProductModel(edmx) - Customer(Entity) - ObjectChangeTracker1, ObjectState1 OrderModel(edmx) - Oder(Entity) - ObjectChangeTracker2, ObjectState2 Is there any way to avoid this? 2) There are few tables which shared across the Models, E.g. Company(Entity) is used in All above mdoels. During compile time it does not thow any error. But run time It gives error saying "Schema specified is not valid. Errors: The mapping of CLR type to EDM type is ambiguous because multiple CLR types match the EDM type "Company"".. To resolve this, we renamed the entities with some prefix to make them Unique. Is there any other way we can resolve this without changing the name of the entity in the same assembly? Thanks in advance and appreciate if anyone has approach for these issues. Thanks, Kiran

  Read the article

< Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >