Search Results

Search found 34341 results on 1374 pages for 'link local'.

Page 466/1374 | < Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >

• What folders to encrypt with EFS on Windows 7 laptop?

  - by Joe Schmoe

  Since I've been using my laptop more as a laptop recently (carrying it around) I am now evaluating my strategy to protect confidential information in case it is stolen. Keep in mind that my laptop is 6 years old (Lenovo T61 with 8 GB or RAM, 2GHz dual core CPU). It runs Windows 7 fine but it is no speedy demon. It doesn't support AES instruction set. I've been using TrueCrypt volume mounted on demand for really important stuff like financial statements forever. Nothing else is encrypted. I just finished my evaluation of EFS, Bitlocker and took a closer look at TrueCrypt again. I've come to conclusion that boot partition encryption via Bitlocker or TrueCrypt is not worth the hassle. I may decide in the future to use Bitlocker or TrueCrypt to encrypt one of the data volumes but at this point I intend to use EFS to encrypt parts of my hard drive that contain data that I wouldn't want exposed. The purpose of this post is to get your feedback about what folders should be encrypted from the general point of view (of course everyone will have something specific in addition) Here is what I thought of so far (will update if I think of something else): 1) AppData\Local\Microsoft\Outlook - Outlook files 2) AppData\Local\Thunderbird\Profiles and AppData\Roaming\Thunderbird\Profiles- Thunderbird profiles, not sure yet where exactly data is stored. 3) AppData\Roaming\Mozilla\Firefox\Profiles\djdsakdjh.default\bookmarkbackups - Firefox bookmark backup. Is there a separate location for "main" Firefox bookmark file? I haven't figured it out yet. 4) Bookmarks for Chrome (don't know where it's bookmarks are) and Internet Explorer ($Username\Favorites) - I don't really use them but why not to secure that as well. 5) Downloads\, My Documents\ and My Pictures\ folders I don't think I need to encrypt, say, latest service pack for Visual Studio. So I will probably create subfolder called "Secure" in all of these folders and set it to "Encrypted". Anything sensitive I will save in this folder. Any other suggestions? Again, this is from the point of view of your "regular office user".

  Read the article

• IIS7 error config and remote errors

  - by Kev

  Certain IIS7/7.5 500.19 configuration errors only render on a browser running on the local server. This appears to happen regardless of whether I set <httpErrors errorMode="Detailed" existingResponse="PassThrough" /> in the system.webServer section of a site's web.config file (or even globally for that matter). For example, I had a developer who reported that he was just getting the generic IIS7 500 error page: This was happening even though he had the following configured in his web.config: <configuration> <system.webServer> <httpErrors errorMode="Detailed" existingResponse="PassThrough" /> </system.webServer> </configuration> If I browse to the site on the server itself I see (some sensitive info redacted): Would the reason for this be that if the web.config has errors it therefore can't be parsed. Because it can't be parsed the local <httpErrors> setting doesn't get read and thus causes IIS to revert to default settings (i.e. DetailedLocalOnly)? Update: @LazyOne - suggested setting the above config at the server level which I already tried. This resulted in just raw 500 errors:

  Read the article

• .htaccess authorization requiring username/password for every resource

  - by webworm

  I am using Apache2 on Ubuntu and I have having some "weird" user authorization issues. I am using .htaccess to control access to my directories. I have many users and have grouped them into user groups which are defined in a "group" file. I then use .htaccess within each directory to define which users have access to the directory and which do not. Here is an example .htaccess file. AuthUserFile /var/local/.htpasswd AuthGroupFile /var/local/groups AuthName "Username and Password Required" AuthType Basic require group design admin Everything is working with one exception. I added a new user to one of my groups and though they can gain access to the directory they are prompted for a username and password for every resource (i.e. image, CSS). After a while I can just keep selecting "cancel" and I will get a page with just html with no images or CSS. I would think the browser would just cache the username/password. It seems to be working well for other users. Any thoughts?

  Read the article

• .htaccess authorization requiring username/password for every resource

  - by webworm

  I am using Apache2 on Ubuntu and I have having some "weird" user authorization issues. I am using .htaccess to control access to my directories. I have many users and have grouped them into user groups which are defined in a "group" file. I then use .htaccess within each directory to define which users have access to the directory and which do not. Here is an example .htaccess file. AuthUserFile /var/local/.htpasswd AuthGroupFile /var/local/groups AuthName "Username and Password Required" AuthType Basic require group design admin Everything is working with one exception. I added a new user to one of my groups and though they can gain access to the directory they are prompted for a username and password for every resource (i.e. image, CSS). After a while I can just keep selecting "cancel" and I will get a page with just html with no images or CSS. I would think the browser would just cache the username/password. It seems to be working well for other users. Any thoughts?

  Read the article

• Remote Desktop Printing With Color

  - by philibertperusse

  Our ACCPACC administration software runs on an off-site dedicated hosted computer, running Windows 2003 Server with a completely different NT DOMAIN. We have many users connecting to that computer remotely to perform administrative tasks such as printing cheques, printing invoices, printing POs, packing slips and so on. Basically the setup is that we are all connecting using Remote Desktop Protocol (local computers are Mac OS.X, XP SP3, Vista and Windows 7). At our office we have a DOCUCOLOR 242 printer. When printing from the ACCPACC software, it prints to the local printer in our office. This is because we are using RDP features to connect printer ressources to the remote computer. This almost works now. I had to install the printer driver software on the remote 2003 Server for the printer sharing to work. Now, everyone is able to print black and white but color is out. NOTES: Normal users on that Windows 2003 server are running as part of a Group Policy Object to restrict what can be done. I took one of these normal users and gave him all domain administrator rights, no effect still B&W only. I took this account and moved it OUT of GPO policies, as a normal account instead, no effect still B&W only. It seems only MY account (which is domain administrator AND a normal account not part of the GPO objects) can actually print with color. This is the account that was used for installing the printer driver software. How can I manage to get everyone to print in color? Any suggestions as to what to try next?

  Read the article

• Setup a new domain controller over a temporary VPN, but now Windows delays startup?

  - by Kris Anderson

  I'm migrating servers from colo locations to Amazon's VPC EC2 instances. If anyone hasn't worked with Amazon VPC before, VPN is a pain in the arse! Anyways, I setup a new server that acts as the domain controller for our Amazon VPC. In order to migrate all the user accounts from our existing domain controllers I manually connected to our colo VPN using my user account on the new Amazon EC2 machine. I was able to join the domain and the new Amazon server became another domain controller on our network. So far so good. The problem I'm having is that when booting the EC2 domain controller (which is no longer connected to the VPN so it can't communicate with the existing controllers), it takes a good 6-8 minuted before I can remote into the server (instead of the 1-2 minutes it should take). Also, during this time most of the services we also run (like IIS) also give 404 errors until the 6-8 minutes have passed. It's almost like the domain controller is attempting to reach the other domain controllers first and after 6-8 minutes it falls back to the one located on the local machine? I don't think that's what's happening though, because Server 2008 R2 doesn't have primary and backup domain controllers. They're all equal as far as Windows is concerned. For my network adapter I have only one DNS listed, 127.0.0.1, so it should be looking up the local domain controller and not the other domain controllers it connected to over VPN when VPN was enabled. In the server logs I'm seeing these warnings pop up during a reboot: The winlogon notification subscriber is taking long time to handle the notification event (CreateSession). The winlogon notification subscriber took 409 second(s) to handle the notification event (CreateSession). Any ideas on what's happening here? I would try removing the existing domain controllers from the new Amazon EC2 machine, but I still need to connect over VPN a few times to migrate some data between the servers, and I don't want that change being reflected back to the other domain controllers in our colo locations.

  Read the article

• Safe place to put an executable file on Windows 7 (and Windows XP)

  - by Ricket

  I'm working on a tweak to our logon script which will copy an executable file to the local hard drive and then, using the schtasks command, schedule a task to run that executable daily. It's a standalone executable file, and when run it creates a folder in the working directory (which would be the same directory as the executable in this case). In Windows XP, of course, it can be put anywhere - I'd probably just throw it in C:\SomeRandomFolder and let it be. But this logon script also runs on Windows 7 64-bit machines, and those are trickier with UAC and all that. The user is a local administrator but UAC is enabled, so I'm pretty sure that the executable would be blocked from copying to a location like C:\ or C:\Program Files (since those seem to be at least mildly protected by UAC). The scheduled task needs to run under the user's profile, so I can't just run it with SYSTEM and ignore the UAC boundaries; I need to find a path which the user can copy into. Where can I copy this standalone executable file, so that the copy operation succeeds without a UAC prompt on Windows 7, the path is either common to both WinXP and Win7 or uses environment variables, and the scheduled task running with user permissions is able to launch the executable?

  Read the article

• Best practice for Exchange 2010 HA topology considering 6 x Exchange licenses and TMG 2010

  - by MadBoy

  What would be best topology considering that: 6 x Exchange 2010 Standard Licenses 2 x Separate locations that are supposed to support redundancy in case of link problems 4 x Forefront TMG 2010 with Forefront Security and Forefront Protection/Security Multiple locations worldwide using those Exchange. Most locations will be connected with VPN Tunnel (the ones hosting Exchange for sure). I was thinking something like this: Location MAIN (about 70-100 people): 2x TMG 2010 in NLB 1x Exchange 2010 CAS/HUB Role 2x Exchange 2010 Mailbox Role (Active + Passive) Location SUPPORT (about 20 people): 2x TMG 2010 in NLB 1x Exchange 2010 CAS/HUB Role 2x Exchange 2010 Mailbox Role (Active + Passive) Management wants to make sure that in case of problems in main location (power failure, link loss etc) second location can support all traffic from around the world and vice-versa. We have 6-7 locations and more comming up (not big ones but like 10+ people per each location). I do know that CAS/HUB is single point of failure (and no NLB), but i simply lack more licenses to do some redundancy on that. What do you think about this approach? What would be better approach according to you?

  Read the article

• sql 2008 disk layout on a budget this is for database mirroring

  - by user22215

  Guys I'm rolling out a SQL database server that will be used to back Sharepoint 2007. Right now I need some advice on my disk layout. I have two Dell servers that are configured a little differently in terms of storage. The principle server will be using a combination of local storage and san storage. I have to work with what I have the organization is currently all allocated on san storage it was like pulling teeth to even get what I have to work with now. My disk setup on the principle is as follows: raid 1 for OS raid 10 for logs raid 10 fiber on san for high IO databases raid 10 sata on san for content databases My question in regards to the principle server is where should I place the temp db? I thought about placing it on the fiber raid 10 which will be hosting my high IO Sharepoint SSP databases my only other choice is to move it to the raid 1 os partition which I’m sure you guys will be against. Now let’s talk about the mirror server it is not connected to the san it is all local 6 15k SAS drives. Now my question is the same do I put tempdb on the os partition or do I leave the os partition and use a single raid 10 for everything? Any help you can provide is much appreciated.

  Read the article

• Which ports are needed for NTLM (Windows Authentication) to connect to SQL Server?

  - by Adam Bellaire

  I've got SQL server running on a machine which is not in a domain, and which is not operating in mixed mode (it's running with "Windows Authentication"). I'm trying to connect to it from a Linux web server running freetds via TCP/IP, using NTLM to authenticate. The firewall on the SQL server is very restrictive. 1433 is open to my web server, but I'm getting conflicting information from the web on what additional ports (TCP/UDP) are needed for NTLM to succeed. It is currently fail; I can talk on 1433 to request NTLM, but the actual authentication always fails. One source says 137, 138, 139, but those are just the NetBIOS ports. Do I really need those? Another source says 135. Still others seem to say 1434... I can't make heads or tails of it. Dammit Jim, I'm a programmer, not a network administrator! EDIT: The exact error message: Msg 18452, Level 14, State 1, Server , Line 0 Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Msg 20002, Level 9, State -1, Server OpenClient, Line -1 Adaptive Server connection failed I am attempting to connect with a remote machine username, i.e. 'servername\username'. Some sources recommend that I set up mirrored accounts on the local and remote machines, but the local machine is running Linux, not IIS under Windows.

  Read the article

• How is Apache still working?

  - by PJ

  Recently, I decided to set up a local development environment for my work projects. I'm a PHP developer, with just enough knowledge of Linux and Apache to break things mightily. To get the local environment looking like my work environment, I had to upgrade PHP. When I did, Apache wouldn't restart. I decided I wanted to start fresh (this is where things went wrong) and that I'd reinstall Apache and PHP using MacPorts. So, I went through and tried to delete all the Apache files. Yup. I ran locate apache2 and deleted any folders that looked important. (I know, I know) Then I did a /usr/libexec/locate.updatedb to make sure everything was up to date. I even restarted my machine, just to make sure. The issue is, http://localhost still works. As does an alias I set up, http://butler. Shouldn't they not work? Now that I'm this far in, are there any tips for how to completely remove Apache so I can start over? Worst case, I have a timemachine backup, so I can always just restore that... Thanks in advance.

  Read the article

• How can I recover from SharePoint configuration errors after promoting the server to a Domain Controller?

  - by jjr2527

  I have a SharePoint 2010 VM setup in VirtualBox and I was using local machine accounts to handle security on the server. While preparing for a demo it came time to have some meaningful users on my VM image. I followed some docs on promoting my server to a Domain Controller in a new forrest. So now I have [MachineName].SPDEMO.CONTOSO.com and I can add users as needed. However, when I try to connect to my SharePoint sites I am getting a white screen with the error: "Cannot connect to the configuration database" I changed the pool identity account of each of my IIS app pools to the new Administrator account and started the services successfully but I can't get the SQL services to start up. When I try to start them I get the following error: Windows could not start the SQL Server (MSSQLSERVER) on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 17058. In the event log I see the following error: The SQL Server (MSSQLSERVER) service terminated with service-specific error %%17058. Can I recover from this or should I roll back or just uninstall the Domain Controller role. I'd like to keep the server as a standalone DC so I can do some user profile creation/management but I need the SharePoint bits to work as well.

  Read the article

• User cannot access a system DSN on Windows Server 2008

  - by Ra Osolage

  We run our SQL Server services using a low privileged domain account. That account is NOT a local admin on the OS. Only access I give the user account is assigned during install of SQL: full control over its mount points and then everything else is granted by the SQL Server 2005/2008 installer. I need to create a linked server in SQL Server 2008 to an ODBC data source. So I remoted into the computer using my domain account, which is part of a group that DOES have local admin privs to the OS. I created a system DSN and configured it to connect to another SQL Server. The DSN works perfectly when I test it. However, when I try to create the linked server, I get an error. It appears to me that the DSN is invisible to the domain account that SQL Server is running as. It seems that this problem is only happening to me on Windows 2008 servers. Does anybody know whether there's anything that you need to do after creating a DSN to make it visible for other users to access?

  Read the article

• Avoiding DNS timeouts when a dns server fails

  - by Neil Katin

  We have a small datacenter with about a hundred hosts pointing to 3 internal dns servers (bind 9). Our problem comes when one of the internal dns servers becomes unavailable. At that point all the clients that point to that server start performing very slowly. The problem seems to be that the stock linux resolver doesn't really have the concept of "failing over" to a different dns server. You can adjust the timeout and number of retries it uses, (and set rotate so it will work through the list), but no matter what settings one uses our services perform much more slowly if a primary dns server becomes unavailable. At the moment this is one of the largest sources of service disruptions for us. My ideal answer would be something like "RTFM: tweak /etc/resolv.conf like this...", but if that's an option I haven't seen it. I was wondering how other folks handled this issue? I can see 3 possible types of solutions: Use linux-ha/Pacemaker and failover ips (so the dns IP VIPs are "always" available). Alas, we don't have a good fencing infrastructure, and without fencing pacemaker doesn't work very well (in my experience Pacemaker lowers availability without fencing). Run a local dns server on each node, and have resolv.conf point to localhost. This would work, but it would give us a lot more services to monitor and manage. Run a local cache on each node. Folks seem to consider nscd "broken", but dnrd seems to have the right feature set: it marks dns servers as up or down, and won't use 'down' dns servers. Any-casting seems to work only at the ip routing level, and depends on route updates for server failure. Multi-casting seemed like it would be a perfect answer, but bind does not support broadcasting or multi-casting, and the docs I could find seem to suggest that multicast dns is more aimed at service discovery and auto-configuration rather than regular dns resolving. Am I missing an obvious solution?

  Read the article

• Accounting setup in freeradius with mikrotik and the "always" module

  - by Matt

  I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

  Read the article

• Problem posting multipart form data using Apache with mod_proxy to a mongrel instance

  - by Ryan E

  I am attempting to simulate my site's production environment as closely as I can on my local machine. This is a rails site that uses Apache w/ mod_proxy to forward requests to a mongrel cluster. On my Mac OSX Leopard machine, I have the default install of apache running and have configured a vhost to use mod_proxy to to forward requests to a local running mongrel instance on port 3000. <Proxy balancer://mongrel_cluster-development> BalancerMember http://127.0.0.1:3000 </Proxy> For the most part, this is working fine. I can browse my development site using the ServerName of the vhost I configured and can confirm that requests are being properly forwarded to the mongrel instance. However, there is a page on the site that has a multipart form that is used to upload an image to the server. When I post this form, there is a delay of about 5 minutes and the browser ultimately returns a Bad Request Your browser sent a request that this server could not understand. In the error log for my vhost: [Tue Sep 22 09:47:57 2009] [error] (70007)The timeout specified has expired: proxy: prefetch request body failed to 127.0.0.1:3000 (127.0.0.1) from ::1 () This same form works fine if I browse directly to the mongrel instance (http://127.0.0.1:3000). Anybody have any idea what the problem might be and how to fix it? If there is any important information that I neglected to include, post a comment, and I can add to this question. Note: Upon further investigation, this appears to be a problem specific to Safari. The form works fine in Firefox.

  Read the article

• Problem with PXE boot

  - by user70523

  I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

  Read the article

• How to get gigabit network speeds on Windows XP?

  - by JB

  We've just installed gigabit switches at work, and things on the Linux side are going well. Our linux boxes, which use a Intel Corporation 82566DM-2 Gigabit nic (according to lspci), consistently get over 900 mbits/sec: iperf -c ipserver ------------------------------------------------------------ Client connecting to ipserver, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.40.9 port 39823 connected with 192.168.1.115 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.08 GBytes 929 Mbits/sec We have a bunch of Windows XP 64-bit machines that use Broadcom NetXtreme 57xx cards. I spent around a day trying to get equivalent speeds on them, but couldn't get above 200 Mbits/sec. I noticed the Windows iperf tests said that the TCP window size was 8 Kb by default (as opposed to 16 Kb on Linux, so I modified my test to reflect that. Still no love. I went to Broadcom's site, downloaded the latest drivers for the card and installed. Still no love. However, finally, I tried a 64 Kb window size with the new drivers, and finally an improvement! $ iperf -c ipserver -w64k ------------------------------------------------------------ Client connecting to ipserver, TCP port 5001 TCP window size: 64.0 KByte ------------------------------------------------------------ [ 3] local 192.168.40.214 port 1848 connected with 192.168.1.115 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 933 MBytes 782 Mbits/sec Much better, but still not really taking advantage of the full capabilities of the network. If the Linux box can reach 950 Mbits/sec consistently, this box should be able to as well. Also, if you're wondering about the medium, this is over the same cable...I'm switching back and forth. Any suggestion or ideas would be really welcome. Thanks!

  Read the article

• Some URLs fail to load on Windows web portal

  - by jpolache

  I’m working in a large data center and have been assigned to troubleshoot and issue with a windows (IIS) web server that acts as a portal for a customer of the data center. This portal server is on a DMZ at the local data center. I don’t have access to the portal desktop and am relying on an off-site administrator to work with me to do testing and report the condition of the portal. He tells me there are no software firewalls or other filtering configured. While most of the remote web pages work fine, several of the URSs the portal is suppose to serve up fail to load. I had wireshark installed on the portal system and had a capture taken of one of the failures. I used IE to access one of the remote web servers at issue. I could see the TCP SYN-ACK coming back from the remote server, but after several HTTP GETs fail to get a response the portal server sends a reset. The webmaster of the remote web server assures me that no sites are being blocked. I had a capture taken outside the local firewall, so there should be no issue there. Another tech set up a laptop and used the IP address of the portal (we took the portal off-line for the test). The laptop loads the URL as expected. I tried having Firefox loaded to make sure that the HTTP GET was not mal-formed. Same failure as with IE. So, it seems it is not the remote web server or the network, because there was no problem with the laptop. At this point, I’m not sure what other questions to ask or tests to do.

  Read the article

• ssh over a tunnel in order to configure auto login

  - by Vihaan Verma

  I m trying to copy the id_rsa.pub key to the server. The server in my case also has a virutal machine called dev which runs on the host machine. I copied the id_rsa.pub key to the host for auto log in using this command. ssh-copy-id -i ~/.ssh/id_rsa.pub vickey@host which worked fine and I can auto log in to host. I also wanted to auto log in to the dev machine. I know I can just copy the contents of authorized_keys from the host machine to the dev machine but I m looking for a command line of doing things. Creating a tunnel seemed like the solution ssh vickey@host -L 2000:dev:22 -N now when I tried ssh-copy-id -i ~/.ssh/id_rsa.pub vickey@localhost -P 2000 the password that worked here was of my local machine , I expected it to ask me password of my dev machine. The above command adds the pub key to the local machine and not to the dev machine. However this commands asks me for the dev password and copies the files. scp -P 2000 vickey@localhost:/home/vickey/trash/vim . vickey@localhost's password: vim 100% 111 0.1KB/s 00:00 How do I do the same with ssh-copy-id ?

  Read the article

• Can I setup NAT for the same service, two public IPs on different routers to the same private IP?

  - by James

  This might be needlessly complex, but here goes. I've got two Firebox x550e devices. The first has a local IP of 10.0.0.1, public IP 64.x.x.x. The second has a local IP of 10.0.0.10, public IP 70.x.x.x. There is an FTP server on our LAN with a private IP of 10.0.0.55. I've set up NAT rules in each of the Fireboxes, on the first firebox it is 64.x.x.x-10.0.0.55 tcp 21, on the second 70.x.x.x-10.0.0.55 tcp 21. The first rule works fine. I can ftp to 64.x.x.x and everything's good. The second rule doesn't work. ftp to 70.x.x.x results in a connection timeout. The second firebox logs say the connection is being allowed through. The default gateway on the FTP server is 10.0.0.1 (the first firebox) If I change the default gateway on the server to 10.0.0.10, the rule on the second firebox starts working, but the rule from the first firebox stops. Is there some way to make this work for both rules?

  Read the article

• SQL Server Agent refuses to start

  - by Geo Ego

  I'm having a problem with SQL Server 2005 where the SQL Server Agent suddenly refuses to start. If I attempt to start it through Services, I get the error "SQL Server Agent (MSSQLSERVER) service on Local Computer started and then stopped." In the Application log, I have the following entry: Event Type: Error Event Source: SQLSERVERAGENT Event Category: Service Control Event ID: 103 Date: 5/20/2010 Time: 11:07:07 AM User: N/A Computer: SHAREPOINT Description: SQLServerAgent could not be started (reason: Unable to connect to server 'SHAREPOINT'; SQLServerAgent cannot start). This database has been running fine for four months. It contains a SharePoint configuration database, which two days ago stopped working, throwing me a message that the configuration database cannot be reached. It was then that I realized the SQL Server Agent was not running, and I have been unable to restart it. I have tried running it with both the local system account and the network service account, with the same results. So far, I have tried: Granting the administrators group, network service, and SharePoint SQL Server Agent account public and sysadmin roles on the database. Granting the administrators group, network service, and SharePoint SQL Server Agent account full permissions to the entire MSSQL directory and all files within. I still have no joy.

  Read the article

• SQL Server 2005 standard filegroups / files for performance on SAN

  - by Blootac

  Ok so I've just been on a SQL Server course and we discussed the usage scenarios of multiple filegroups and files when in use over local RAID and local disks but we didn't touch SAN scenarios so my question is as follows; I currently have a 250 gig database running on SQL Server 2005 where some tables have a huge number of writes and others are fairly static. The database and all objects reside in a single file group with a single data file. The log file is also on the same volume. My interpretation is that separate data files should be used across different disks to lessen disk contention and that file groups should be used for partitioning of data. However, with a SAN you obviously don't really have the same issue of disk contention that you do with a small RAID setup (or at least we don't at the moment), and standard edition doesn't support partitioning. So in order to improve parallelism what should I do? My understanding of various Microsoft publications is that if I increase the number of data files, separate threads can act across each file separately. Which leads me to the question how many files should I have. One per core? Should I be putting tables and indexes with high levels of activity in separate file groups, each with the same number of data files as we have cores? Thank you

  Read the article

• Postfix / Dovecot email setup not storing email

  - by Nick Duffell

  I'm trying to setup postfix / dovecot on my debian server to use it for a mail server. I set everything up according to a tutorial on the net, and it all seemed OK. I can send emails from it, so SMTP is not a problem, however I cannot receive emails. Looking into the files in /home/nick/mail/ I can see that if I send an email to myself (from the server, to itself) the emails are there, but are put straight into the Deleted Messages folder. I don't know why this is. When I send an email from another mail account (not on this server), the emails are nowhere to be found. Also, looking at the log file /var/log/mail.log all seems to be OK, I get the following when I receive an email, which looks OK to me: Nov 7 22:47:22 nickduffell postfix/local[17825]: 05B1173581A6: to=, relay=local, delay=0.37, delays=0.31/0.02/0/0.03, dsn=2.0.0, status=sent (delivered to mailbox) Any ideas? Thanks EDIT: I should also add that although the emails I send myself are in the Deleted Messages folder, and in my mail client I can see that "Trash" has 3 items, I cannot download them in my mail client...

  Read the article

• After reinstallation, Disk Cleanup disappears when I click OK.

  - by James

  After I reinstalled Windows 7, Disk Cleanup stopped working. I can start Disk Cleanup and select the drive to clean, but when I click on the OK button, the window disappears. Any solutions? Here's the data from Windows LogsApplication :- EventData 1744235005 1 APPCRASH Not available 0 cleanmgr.exe 6.1.7600.16385 4a5bc5e1 Csi.dll 14.0.4733.1000 4b5662be c0000005 00135213 F:\Users\Jacob\AppData\Local\Temp\WER419.tmp.WERInternalMetadata.xml F:\Users\Jacob\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_cleanmgr.exe_6514b6ecb633f97cbf78e3a5bcae2c4bd74351_0d3b109c 0 75fa9599-41b1-11e0-b864-001966b2bcb6 0 The above one was with an Information icon. The one below was with an Error icon:-- EventData cleanmgr.exe 6.1.7600.16385 4a5bc5e1 Csi.dll 14.0.4733.1000 4b5662be c0000005 00135213 bbc 01cbd5be36b572bf F:\Windows\system32\cleanmgr.exe F:\Program Files\Common Files\Microsoft Shared\OFFICE14\Csi.dll 75fa9599-41b1-11e0-b864-001966b2bcb6 I also used process explorer:- When i started disk cleanup, a cleanmgr.exe process appeared under explorer.exe.But when i clicked on the "OK" button after selecting the drive, cleanmgr.exe was there for some seconds before it disappeared. But a new process - WerFault.exe appeared under svchost.exe a few seconds after i clicked the "OK" button. It disappeared, too, from the process list after some time (i think it disappeared along with cleanmgr.exe).

  Read the article

< Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >