Search Results

Search found 31973 results on 1279 pages for 'network library'.

Page 467/1279 | < Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >

  • Impressions of my ASUS eee slate EP121 - Dual core 4GB, 64GB SSD

    - by tonyrogerson
    This thing is lovely, very nice bluetooth keyboard that has nice feedback on the keypress, there is no mouse but you can use the stylus or get yourself a bluetooth mouse, me, I've opted for a Microsoft ARC mouse which is a delight to use, the USB doors are a pain to open for the first time if like me you don't have any finger nails. It came as a suprise that the slate shows four processors, Dual Core with multi-threading, I didn't really look at the processor I was more interested in the amount of memory and the SSD; you don't get the full 4GB even with the 64 bit version of Windows 7 installed (which I immediately upgraded to Ultimate through my MSDN subscription). The box is extremely responsive - extremely, it loads Winword in literally a second. I've got office 2010 and onenote 2010 on there now; one problem is that on applying all (43) windows updates since the upgrade the machine is still sat on step 3 of 3 on the start up configuring updates screen after about an hour, you can't turn this machine off without using a paper clip to reset it and as I have just found you need a paper clip :). Installing Windows 7 SP1 was effortless. One of the first things I did on it was to reduce the size of the font, by default its set at 125%, my eye sight is ok :) so I've set that back down. Amazon Kindle for the PC works really well, plenty of text on the screen when viewed portrait, the case it comes with also allows the slate to stand up in various positions - portrait, horizontal - seems stable enough. The wireless works well, seems to have a better signal than my other two laptop machines which is good news. The gadget passed the pose test at work :). I use offline files to keep a copy of all my work stuff locally, I'm not sure what it is, well, its probably my server but whenever I try and sync it runs for a couple of minutes then fails with network name no longer contactable, funnily enough its fine from my big laptop so I can only guess this may be a driver type issue on the EP121 itself - very odd and very annoying. I do a lot of presenting and need to plug into a VGA project because most sites that's all that is offered, the EP121 has a mini-hdmi output which is great except for this scenario, hdmi is digital, vga is analogue, you will struggle to find a cost effective solution, I found HDFury and also a device HP do, however, a better solution appears to be getting a USB graphics adapter for instance the one I've ordered is the ClimaxDigital USB 2.0 to DVI,VGA or HDMI Adaptor which gives everything I need - VGA and DVI output and great resolution as well - ok, so fingers crossed because I'm presenting next Wednesday in Edinburgh and not taking my 300kg lenovo w700 (I'm sure my back just sighed in relief) - it certainly works really well on my LED TV, the install was simple - it just works! One of the several reasons for buying this piece of kit was to use it on my LED TV to remote into my main machine to check stuff whilst sat in my living room, also to watch webcasts and lecture videos in comfort away from my office, because of the wireless speed and limitation I'm opting for a USB network adapter from Belkin - that will also allow me to take advantage of my home gigabit network, there are only 2 usb ports on the slate so I'm going to knock up a hub so connecting it in is straight forward and simple, I'm also going to purchase a second power supply so I don't have to faff about with that either.I now have the developer x64 edition of SQL Server 2008 R2, yes everything :) - about 16GB left to play with on the machine now but that will be fine, I'll put AdventureWorks on there so I can play and demo stuff which is all I'm after from this, my development machine is significantly more powerful and meets my storage needs too.Travel test this weekend and next week, I'm in Dundee for my final exam for the masters degree.

    Read the article

  • Expanding the Partner Ecosystem with Third-Party Plug-ins

    - by Joe Diemer
    Oracle Enterprise Manager’s extensibility capabilities are designed to allow customers and partners to adapt Enterprise Manager for management of heterogeneous environments with Plug-ins and Connectors.  Third-party developers continue to take advantage of Oracle Enterprise Manager’s Extensibility Development Kit (EDK) to build plug-ins to Enterprise Manager 12c, such as F5’s BIG IP Plug-in and Entuity’s Eye of the Storm Network Management Plug-In.  Partners can also validate their plug-ins through the Oracle Validated Integration (OVI) program, which assures customers that the plug-in has been tested and is functionally and technically sound, is designed in a reliable and standardized manner, and operates and performs as documented.   Two very recent examples of partners which have beta versions of their plug-ins are Blue Medora's VMware vSphere plug-in and the NetApp Storage plug-in.  VMware vSphere Plug-in by Blue Medora Blue Medora, an Oracle Partner Network (OPN) “Gold” member, which just announced that it is now signing up customers to try a beta version of their new VMware vSphere plug-in for Enterprise Manager 12c.  According to Blue Medora, the vSphere plug-in monitors critical VMware metrics (CPU, Memory, Disk, Network, etc) at the Host, VM, Cluster and Resource Pool levels.  It has minimal performance impact via an “agentless” approach that requires no installation directly on VMware servers.  It has discovery capabilities for VMware Datacenters, ESX Hosts, Clusters, Virtual Machines, and Datastores.  It offers integration of native VMware Events into Enterprise Manager, and it provides over 300 VMware-related health, availability, performance, and configuration metrics.  It comes with more than 30 out-of-the-box pre-defined thresholds and can manage VMware via a series of jobs split between cluster, host and VM target types.The company reports that the Enterprise Manager 12c plug-in supports vSphere versions 4.0, 4.5 and 5.0.  Platforms supported include Linux 64-bit, Windows, AIX and Solaris SPARC and x86.  Information about the plug-in, including how to sign up for the beta, is available at their web site at http://bluemedora.com after selecting the "Products" tab. NetApp Storage Plug-in NetApp believes the combination of storage system monitoring with comprehensive management of Oracle systems with Enterprise Manager will help customers reduce the cost and complexity of managing applications that rely on NetApp storage and Oracle technologies.  So, NetApp built a plug-in and reports that it has comprehensive availability and performance information for NetApp storage systems.  Using the plug-in, Oracle Enterprise Manager customers with NetApp storage solutions can track the association between databases and storage components and thereby respond to faults and IO performance bottlenecks quickly. With the latest configuration management capabilities, one can also perform drift analysis to make sure all storage systems are configured as per established gold standards. The company is also now signing up beta customers, which can be done at the NetApp Communities site at https://communities.netapp.com/groups/netapp-storage-system-plug-in-for-oem12c-beta. Learn More about Enterprise Manager Extensibility More plug-ins from other partners are soon to come, which I'll be reporting on them here.  To learn more about Enterprise Manager and how customers and partners can build plug-ins using the EDK to manage a multi-vendor data center, go to http://oracle.com/enterprisemanager in the Heterogeneous Management solution area.  The site also lists the plug-ins available with information on how to obtain them.  More info about the Oracle Validated Integration program can be found at the OPN Enterprise Manager Knowledge Zone in the "Develop" tab.

    Read the article

  • CacheAdapter 2.4 – Bug fixes and minor functional update

    - by Glav
    Note: If you are unfamiliar with the CacheAdapter library and what it does, you can read all about its awesome ability to utilise memory, Asp.Net Web, Windows Azure AppFabric and memcached caching implementations via a single unified, simple to use API from here and here.. The CacheAdapter library is receiving an update to version 2.4 and is currently available on Nuget here. Update: The CacheAdapter has actualy just had a minor revision to 2.4.1. This significantly increases the performance and reliability in memcached scenario under more extreme loads. General to moderate usage wont see any noticeable difference though. Bugs This latest version fixes a big that is only present in the memcached implementation and is only seen in rare, intermittent times (making i particularly hard to find). The bug is where a cache node would be removed from the farm when errors in deserialization of cached objects would occur due to serialised data not being read from the stream in entirety. The code also contains enhancements to better surface serialization exceptions to aid in the debugging process. This is also specifically targeted at the memcached implementation. This is important when moving from something like memory or Asp.Web caching mechanisms to memcached where the serialization rules are not as lenient. There are a few other minor bug fixes, code cleanup and a little refactoring. Minor feature addition In addition to this bug fix, many people have asked for a single setting to either enable or disable the cache.In this version, you can disable the cache by setting the IsCacheEnabled flag to false in the application configuration file. Something like the example below: <Glav.CacheAdapter.MainConfig> <setting name="CacheToUse" serializeAs="String"> <value>memcached</value> </setting> <setting name="DistributedCacheServers" serializeAs="String"> <value>localhost:11211</value> </setting> <setting name="IsCacheEnabled" serializeAs="String"> <value>False</value> </setting> </Glav.CacheAdapter.MainConfig> Your reasons to use this feature may vary (perhaps some performance testing or problem diagnosis). At any rate, disabling the cache will cause every attempt to retrieve data from the cache, resulting in a cache miss and returning null. If you are using the ICacheProvider with the delegate/Func<T> syntax to populate the cache, this delegate method will get executed every single time. For example, when the cache is disabled, the following delegate/Func<T> code will be executed every time: var data1 = cacheProvider.Get<SomeData>("cache-key", DateTime.Now.AddHours(1), () => { // With the cache disabled, this data access code is executed every attempt to // get this data via the CacheProvider. var someData = new SomeData() { SomeText = "cache example1", SomeNumber = 1 }; return someData; }); One final note: If you access the cache directly via the ICache instance, instead of the higher level ICacheProvider API, you bypass this setting and still access the underlying cache implementation. Only the ICacheProvider instance observes the IsCacheEnabled setting. Thanks to those individuals who have used this library and provided feedback. Ifyou have any suggestions or ideas, please submit them to the issue register on bitbucket (which is where you can grab all the source code from too)

    Read the article

  • Oracle EMEA News Digest - May 2014

    - by Steve Walker
    Systems Oracle introduced a technology preview of an OpenStack® distribution that allows Oracle Linux and Oracle VM users to work with the open source cloud software. This provides customers with additional choices and interoperability while taking advantage of the efficiency, performance, scalability, and security of Oracle Linux and Oracle VM. The distribution is delivered as part of the Oracle Linux and Oracle VM Premier Support offerings, at no additional cost. Oracle plans to work further with the OpenStack community to develop and enhance its enterprise-class capabilities to meet customer demands. Also in the Open Source arena, Oracle announced the general availability of MySQL Fabric. MySQL Fabric provides an integrated system that makes it simpler to manage groups of MySQL databases. It delivers both high availability - via failure detection and failover - and scalability through automated data sharding. Oracle Database, Middleware and Technology The company made two announcements for Oracle Tuxedo, the #1 application server for C, C++, COBOL and Java deployments in private cloud or traditional data center environments. With enhanced management and monitoring features and tighter integration with Oracle technologies, the latest release of Oracle Tuxedo 12c enables organizations to dramatically increase application throughput, while reducing total cost of ownership and time to market for new application development and deployment. Oracle also introduced the latest release of its mainframe application rehosting platform, Oracle Tuxedo ART 12c, to help organizations speed up migration projects and accelerate the adoption of the new environment by current IT staff. It enables organizations to accelerate the rehosting of IBM mainframe applications and greatly enhance management and supportability of the rehosted applications while reducing costs and risk. Applications According to new Oracle studies, B2B and B2C commerce professionals find integrated, omni-channel customer experiences increasingly valuable to their organizations, and are continuing to invest in technologies and digital content strategies to facilitate them. The studies—one for B2B and one for B2C—surveyed e-commerce professionals in business and technology departments from around the world. Although the priorities, success metrics, and technology investments differed between the two groups, customer acquisition and retention emerged as common themes across B2B and B2C. Growing market share and enhancing customer experience are cited as top investment areas for all e-commerce professionals. In product news, Oracle announced the latest release of Oracle Business Intelligence (BI) Applications (version 11.1.1.8.1, in case anyone asks). It includes prebuilt connectors between Oracle Procurement and Spend Analytics and Oracle’s JD Edwards. Additionally, a new Oracle Human Resources Analytics module for developing and maintaining a skilled workforce has been introduced. In use at more than 4,000 companies worldwide, Oracle BI Applications support leading enterprise applications, including Oracle E-Business Suite, Oracle’s PeopleSoft, Oracle's Siebel CRM, Oracle’s JD Edwards EnterpriseOne offering high-performing analytics at a lower cost. Industries For the Communications Industry, Oracle has launched a new release of the Oracle Communications Core Session Manager. This gives CSPs a new way to design, deploy and manage complex networking services and embrace next-generation technology, It provides them with an immediate entry point for  network function virtualization (NFV) efforts, allowing them to realize immediate benefits associated with network virtualization – including increased service agility and improved network resource sharing. And for the Utilities Industry, Oracle is releasing solutions with new business features and enhanced technical architecture that help position utilities for success now and into the future. Oracle has provided new releases for its customer information system,  meter data management system, customer self-service solution and mobile workforce management solution.

    Read the article

  • WebCenter Customer Spotlight: Ancestry.com

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryAncestry.com Inc is the largest for-profit genealogy company in the world and it operates a network of genealogical and historical record websites focused on the U.S. and nine foreign countries, develops and markets genealogical software, and offers a wide array of genealogical related services. As of June 2012, the company provided access to more than 10 billion records, 38 million family trees, and 2 million paying subscribers. Their main business challenges were to improve time to market and agility to respond quickly to fast changing Internet waves while integrating with their existing content (4 PetaByte) and legacy systems. Ancestry.com implemented Oracle WebCenter Sites as their Web Experience Management System for their landing pages and marketing micro sites, added dynamic sections to their existing websites and integrated the existing content and legacy systems through web services. The Ancestry.com landing pages and marketing sites are now managed by the business team without any involvement of engineering resources. Managed content can quickly be added to existing pages without having to refactor the whole page and existing content (4 PetaBytes)  is now served trough Oracle WebCenter Sites without having to migrate from existing systems. Company OverviewAncestry.com Inc is a publicly traded Internet company (NASDAQ: ACOM) based in Provo, Utah, USA. The largest for-profit genealogy company in the world, it operates a network of genealogical and historical record websites focused on the U.S. and nine foreign countries, develops and markets genealogical software, and offers a wide array of genealogical related services. As of June 2012, the company provided access to more than 10 billion records, 38 million family trees, and 2 million paying subscribers. Business ChallengesAncestry main business challenge was to respond quickly to fast changing Internet waves.  Product marketing could not change Web site content without going through development. They needed dedicated developers just to support their marketing efforts. Technical Requirements Support current systems and environments - ASP.NET, MVC.NET, Java, JSP, PHP Scalable and manageable for a world wide network Marketing Requirements Easy to enter content – Without having a degree in HTML Scheduling of content – When is content visible to users Product Requirements Easy to manage content – See when content is out-of-date Rotation of content – Producing new content as old content expires Solution DeployedAncestry implemented  Oracle WebCenter Sites as their Web Experience Management System to manage their landing pages and marketing micro sites. This sites are fully managed by their business team without involvement of any engineering resources. The integration with their existing Web sites is done through Spot Management which allows the ability to add dynamic content to certain sections of a web page. The dynamic content is managed by  Oracle WebCenter Sites. The integration with the existing content (4 PetaBytes!) is done trough  a custom content provider interface which allows to mix existing content with content from  Oracle WebCenter Sites. Business ResultsAncestry.com has achieved following impressive business results: Landing pages and marketing sites are now managed by the business team without any involvement of engineering resources Managed content can quickly be added to existing pages without having to refactor the whole page Provide access to existing content (4 PetaBytes)  without having to migrate from existing systems Additional Information Ancestry Webcast Oracle WebCenter Sites

    Read the article

  • Errors when trying to compile the driver for the rtl8192su wireless adapter

    - by Tom Brito
    I have a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme says to use the make command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g sudo lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) sudo lsusb Bus 002 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1 Bus 001 Device 003: ID 0b05:1786 ASUSTek Computer, Inc. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • To SYNC or not to SYNC – Part 4

    - by AshishRay
    This is Part 4 of a multi-part blog article where we are discussing various aspects of setting up Data Guard synchronous redo transport (SYNC). In Part 1 of this article, I debunked the myth that Data Guard SYNC is similar to a two-phase commit operation. In Part 2, I discussed the various ways that network latency may or may not impact a Data Guard SYNC configuration. In Part 3, I talked in details regarding why Data Guard SYNC is a good thing, and the distance implications you have to keep in mind. In this final article of the series, I will talk about how you can nicely complement Data Guard SYNC with the ability to failover in seconds. Wait - Did I Say “Seconds”? Did I just say that some customers do Data Guard failover in seconds? Yes, Virginia, there is a Santa Claus. Data Guard has an automatic failover capability, aptly called Fast-Start Failover. Initially available with Oracle Database 10g Release 2 for Data Guard SYNC transport mode (and enhanced in Oracle Database 11g to support Data Guard ASYNC transport mode), this capability, managed by Data Guard Broker, lets your Data Guard configuration automatically failover to a designated standby database. Yes, this means no human intervention is required to do the failover. This process is controlled by a low footprint Data Guard Broker client called Observer, which makes sure that the primary database and the designated standby database are behaving like good kids. If something bad were to happen to the primary database, the Observer, after a configurable threshold period, tells that standby, “Your time has come, you are the chosen one!” The standby dutifully follows the Observer directives by assuming the role of the new primary database. The DBA or the Sys Admin doesn’t need to be involved. And - in case you are following this discussion very closely, and are wondering … “Hmmm … what if the old primary is not really dead, but just network isolated from the Observer or the standby - won’t this lead to a split-brain situation?” The answer is No - It Doesn’t. With respect to why-it-doesn’t, I am sure there are some smart DBAs in the audience who can explain the technical reasons. Otherwise - that will be the material for a future blog post. So - this combination of SYNC and Fast-Start Failover is the nirvana of lights-out, integrated HA and DR, as practiced by some of our advanced customers. They have observed failover times (with no data loss) ranging from single-digit seconds to tens of seconds. With this, they support operations in industry verticals such as manufacturing, retail, telecom, Internet, etc. that have the most demanding availability requirements. One of our leading customers with massive cloud deployment initiatives tells us that they know about server failures only after Data Guard has automatically completed the failover process and the app is back up and running! Needless to mention, Data Guard Broker has the integration hooks for interfaces such as JDBC and OCI, or even for custom apps, to ensure the application gets automatically rerouted to the new primary database after the database level failover completes. Net Net? To sum up this multi-part blog article, Data Guard with SYNC redo transport mode, plus Fast-Start Failover, gives you the ideal triple-combo - that is, it gives you the assurance that for critical outages, you can failover your Oracle databases: very fast without human intervention, and without losing any data. In short, it takes the element of risk out of critical IT operations. It does require you to be more careful with your network and systems planning, but as far as HA is concerned, the benefits outweigh the investment costs. So, this is what we in the MAA Development Team believe in. What do you think? How has your deployment experience been? We look forward to hearing from you!

    Read the article

  • Friday Tips #6, Part 1

    - by Chris Kawalek
    We have a two parter this week, with this post focusing on desktop virtualization and the next one on server virtualization. Question: Why would I use the Oracle Secure Global Desktop Secure Gateway? Answer by Rick Butland, Principal Sales Consultant, Oracle Desktop Virtualization: Well, for the benefit of those who might not be familiar with client connections in Oracle Secure Global Desktop (SGD), let me back up and briefly explain. An SGD client connects to an SGD server using two distinct protocols, which, by default, require two distinct TCP ports. The first is the HTTP protocol, used by the web browser to connect to the SGD webserver on TCP port 80, or if secure connections are enabled (SSL/TLS), then TCP port 443, commonly identified as the "HTTPS" port, that is, "SSL encrypted HTTP." The second protocol from the client to the server is the Adaptive Internet Protocol, or AIP, which is used for displaying applications, transferring drive mapping data, print jobs, and so on. By default, AIP uses the TCP port 3104, or port 5307 when SSL is enabled. When SGD clients need to access SGD over a firewall, the ports that AIP requires are typically "closed"; and most administrators are reluctant, to put it mildly, to change their firewall configurations to allow AIP traffic on 3144/5307.   To avoid this problem, SGD introduced "Firewall Forwarding", a technique where, in effect, both http and AIP traffic are "multiplexed" onto a single "well-known" TCP port, that is port 443, the https port.  This is also known as single-port firewall traversal.  This technique takes advantage of the fact that, as a "well-known service", port 443 is usually "open",   allowing (encrypted) traffic to pass. At the target SGD server, the two protocols are de-multiplexed and routed appropriately. The Secure Gateway was developed in response to requirements from customers for SGD to support multi-stage DMZ's, and to avoid exposing SGD servers and the information they contain directly to connections from the Internet. The Secure Gateway acts as a reverse-proxy in the first-tier of the DMZ, accepting, authenticating, and terminating incoming client connections, and then re-encrypting the connections, and proxying them, routing them on to SGD servers, deeper in the network. The client no longer needs to know the name/IP address of the SGD servers in their network, they connect to the gateway, only. The gateway takes care of those internal network details.     The Secure Gateway supports the same "single-port firewall" capability as does "Firewall Forwarding", but offers the additional advantage of load-balancing incoming client connections amongst SGD array members, which could be cumbersome without a forward-deployed secure gateway. Load-balancing weights and policies can be monitored and tuned using the "Balancer Manager" application, and Apache mod_proxy_balancer directives.   Going forward, our architects recommend the use of the Secure Gateway over "Firewall Forwarding" for single-port firewall traversal, due to its architectural advantages, its greater flexibility and enhanced features.  Finally, it should be noted that the Secure Gateway is not separately priced; any licensed SGD customer may use the Secure Gateway component at no additional cost.   For more information, see the "Secure Gateway Administrator's Guide".

    Read the article

  • How to deploy global managed beans

    - by frank.nimphius
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} "Global managed" beans is the term I use in this post to describe beans that are used across applications. Global managed beans contain helper - or utility - methods like or instead of JSFUtils and ADFUtils. The difference between global managed beans and static helper classes like JSFUtis and ADFUtils is that they are EL accessible, providing reusable functionality that is ready to use on UI components and - if accessed from Java - in other managed beans. For example, the ADF Faces page template (af:pageTemplate) allows you to define attributes for the consuming page to pass in object references or strings into it. It does not have method attributes that allow command components contained in a template to invoke listeners in managed beans and the ADF binding layer, or to execute actions. To create templates that provide global button or menu functionality, like logon, logout, print etc., an option for developers is to deployed managed beans with the ADF Faces page templates. To deploy a managed bean with a page template, create an ADF library from the project containing the template definition and import this ADF library into the target project using the Resource palette. When importing an ADF library, all its content is added to the project, including page template definitions, managed bean sources and configurations. More about page templates http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e12419/tagdoc/af_pageTemplate.html Another use-case for globally configured managed beans is for creating helper methods to be used in many applications. Instead of creating a base managed bean class that then is extended by all managed beans used in applications, you can deploy a managed bean in a JAR file and add the faces-config.xml file with the managed bean configuration to the JAR's META-INF folder as shown below. Using a globally configured managed bean allows you to use Expression Language in the UI to access common functionality but also use Java in application specific managed beans. Storing the faces-config.xml file in the JAR file META-INF directory automatically makes it available when the JAR file is found in the class path of an application.

    Read the article

  • Ubuntu 12.04 LXC nat prerouting not working

    - by petermolnar
    I have a running Debian Wheezy setup I copied exactly to an Ubuntu 12.04 ( elementary OS, used as desktop as well ) While the Debian setup runs flawlessly, the Ubuntu version dies on the prerouting to containers ( or so it seems ) In short: lxc works containers work and run connecting to container from host OK ( including mixed ports & services ) connecting to outside world from container is fine What does not work is connecting from another box to the host on a port that should be NATed to a container. The setups: /etc/rc.local CMD_BRCTL=/sbin/brctl CMD_IFCONFIG=/sbin/ifconfig CMD_IPTABLES=/sbin/iptables CMD_ROUTE=/sbin/route NETWORK_BRIDGE_DEVICE_NAT=lxc-bridge HOST_NETDEVICE=eth0 PRIVATE_GW_NAT=192.168.42.1 PRIVATE_NETMASK=255.255.255.0 PUBLIC_IP=192.168.13.100 ${CMD_BRCTL} addbr ${NETWORK_BRIDGE_DEVICE_NAT} ${CMD_BRCTL} setfd ${NETWORK_BRIDGE_DEVICE_NAT} 0 ${CMD_IFCONFIG} ${NETWORK_BRIDGE_DEVICE_NAT} ${PRIVATE_GW_NAT} netmask ${PRIVATE_NETMASK} promisc up Therefore lxc network is 192.168.42.0/24 and the host eth0 ip is 192.168.13.100; setup via network manager as static address. iptables: *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT *filter :FORWARD ACCEPT [0:0] :INPUT DROP [0:0] :OUTPUT ACCEPT [0:0] # Accept traffic from internal interfaces -A INPUT -i lo -j ACCEPT # accept traffic from lxc network -A INPUT -d 192.168.42.1 -s 192.168.42.0/24 -j ACCEPT # Accept internal traffic Make sure NEW incoming tcp connections are SYN # packets; otherwise we need to drop them: -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Packets with incoming fragments drop them. This attack result into Linux server panic such data loss. -A INPUT -f -j DROP # Incoming malformed XMAS packets drop them: -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # Incoming malformed NULL packets: -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # Accept traffic with the ACK flag set -A INPUT -p tcp -m tcp --tcp-flags ACK ACK -j ACCEPT # Allow incoming data that is part of a connection we established -A INPUT -m state --state ESTABLISHED -j ACCEPT # Allow data that is related to existing connections -A INPUT -m state --state RELATED -j ACCEPT # Accept responses to DNS queries -A INPUT -p udp -m udp --dport 1024:65535 --sport 53 -j ACCEPT # Accept responses to our pings -A INPUT -p icmp -m icmp --icmp-type echo-reply -j ACCEPT # Accept notifications of unreachable hosts -A INPUT -p icmp -m icmp --icmp-type destination-unreachable -j ACCEPT # Accept notifications to reduce sending speed -A INPUT -p icmp -m icmp --icmp-type source-quench -j ACCEPT # Accept notifications of lost packets -A INPUT -p icmp -m icmp --icmp-type time-exceeded -j ACCEPT # Accept notifications of protocol problems -A INPUT -p icmp -m icmp --icmp-type parameter-problem -j ACCEPT # Respond to pings, but limit -A INPUT -m icmp -p icmp --icmp-type echo-request -m state --state NEW -m limit --limit 6/s -j ACCEPT # Allow connections to SSH server -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m limit --limit 12/s -j ACCEPT COMMIT *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 2221 -m state --state NEW -m limit --limit 12/s -j DNAT --to-destination 192.168.42.11:22 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 80 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:80 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 443 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:443 -A POSTROUTING -d 192.168.42.0/24 -o eth0 -j SNAT --to-source 192.168.13.100 -A POSTROUTING -o eth0 -j MASQUERADE COMMIT sysctl: net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.all.mc_forwarding = 0 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.default.mc_forwarding = 0 net.ipv4.ip_forward = 1 I've set up full iptables log on the container; none of the packets addressed to 192.168.13.100, port 80 is reaching the container. I've even tried different kernels ( server kernel, raring lts kernel, etc ), modprobe everything iptables & nat related, nothing. Any ideas?

    Read the article

  • Wireless device bug on 13.10. BCM4313 registers as eth1 instead of wlan0 and no internet access

    - by user205691
    My Hotel wiFi requires me to login with a username & password after connecting to the hotspot. So, my browser would open a page with username & passwrd fields to login and then connect to internet. But unfortunately, firefox & chromium dont seem to work. i dont think it is browser related but a setting for the wifi router or driver which is creating this issue. using Broadcom 801.11 STA wireless driver (proprietary). tried open source as well but same result !! The image linked below shows my wifi connection setting & Chromium. The login page itself comes up after a long time and after entering the credentials, it keeps loading for ever !! it is the same case for every other browser.. so i dont think its browser issue but something to do with wifi setting or network manager stuff.. interestingly, i am able to connect to WiFi networks with WPA key without any issue. Adhoc hotspot is a problem and that is my regular home network :( .. I hope i can get some help solving this issue ! I have tried repeating the same hotspot after login from my android, by creating a virtual repeater with WPA key and it works. I can browse on ubuntu using this method.. but cant be doing this regularly ! I tried loading the same login page of the hotel wifi while browsing through my repeater wifi created on mobile and screen shot attached below. the page loads up quick and easy.. so this means something is wrong with the way network manager handles adhoc connectivity & login ?? i installed wicd0 but it crashes on startup and not helpful at all ! Screenshot of Chromium page Login page with repeated hotspot ifconfig in my terminal results: krishna@krishna-HP-ENVY-4-Notebook-PC:~$ ifconfig eth0 Link encap:Ethernet HWaddr 28:92:4a:1d:54:fa UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr e0:06:e6:89:fa:49 inet addr:10.24.1.71 Bcast:10.24.1.255 Mask:255.255.255.0 inet6 addr: fe80::e206:e6ff:fe89:fa49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10940 errors:0 dropped:0 overruns:0 frame:348431 TX packets:6611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7669631 (7.6 MB) TX bytes:864195 (864.1 KB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 TX packets:2146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:166120 (166.1 KB) TX bytes:166120 (166.1 KB) I wonder why is the wireless configured under eth1 ? I think this is a bug with earlier ubuntu versions, but is this normal in 13.10 or is there a wrong configuration here ? The wireless device in my pc is BCM4313 and i have installed the bcmwl-kernel-sources, wireless-tools to support the device. i also reinstalled the bcmwl-kernel as suggested on broadcom website, via synaptic package manager. Nothing has changed this situation ! I tried booting into liveUSB and then ifconfig results show wireless under wlan0. But then the wireless connects and loads the login page. So is the problem with the device configuration now ? i really want to get this fixed before i start configuring the other stuff like ATI graphics and such on the laptop for overheating.. lack of internet access is too bad a bug for me :P any help is appreciated!

    Read the article

  • Using HTML5 Today part 3&ndash; Using Polyfills

    - by Steve Albers
    Shims helps when adding semantic tags to older IE browsers, but there is a huge range of other new HTML5 features that having varying support on browsers.  Polyfills are JavaScript code and/or browser plug-ins that can provide older or less featured browsers with API support.  The best polyfills will detect the whether the current browser has native support, and only adds the functionality if necessary.  The Douglas Crockford JSON2.js library is an example of this approach: if the browser already supports the JSON object, nothing changes.  If JSON is not available, the library adds a JSON property in the global object. This approach provides some big benefits: It lets you add great new HTML5 features to your web sites sooner. It lets the developer focus on writing to the up-and-coming standard rather than proprietary APIs. Where most one-off legacy code fixes tends to break down over time, well done polyfills will stop executing over time (as customer browsers natively support the feature) meaning polyfill code may not need to be tested against new browsers since they will execute the native methods instead. Your should also remember that Polyfills represent an entirely separate code path (and sometimes plug-in) that requires testing for support.  Also Polyfills tend to run on older browsers, which often have slower JavaScript performance.  As a result you might find that performance on older browsers is not comparable. When looking for Polyfills you can start by checking the Modernizr GitHub wiki or the HTML5 Please site. For an example of a polyfill consider a page that writes a few geometric shapes on a <canvas> <script src="jquery-1.7.1.min.js"><script> <script> $(document).ready(function () { drawCanvas(); }); function drawCanvas() { var context = $("canvas")[0].getContext('2d'); //background context.fillStyle = "#8B0000"; context.fillRect(5, 5, 300, 100); // emptybox context.strokeStyle = "#B0C4DE"; context.lineWidth = 4; context.strokeRect(20, 15, 80, 80); // circle context.arc(160, 55, 40, 0, Math.PI * 2, false); context.fillStyle = "#4B0082"; context.fill(); </script>   The result is a simple static canvas with a box & a circle:   …to enable this functionality on a pre-canvas browser we can find a polyfill.  A check on html5please.com references  FlashCanvas.  Pull down the zip and extract the files (flashcanvas.js, flash10canvas.swf, etc) to a directory on your site.  Then based on the documentation you need to add a single line to your original HTML file: <!--[if lt IE 9]><script src="flashcanvas.js"></script><![endif]—> …and you have canvas functionality!  The IE conditional comments ensure that the library is only loaded in browsers where it is useful, improving page load & processing time. Like all Polyfills, you should test to verify the functionality matches your expectations across browsers you need to support.  For instance the Flash Canvas home page advertises 70% support of HTML5 Canvas spec tests.

    Read the article

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • installer can't find partition, but fdisk can find them

    - by pxd
    I'm installing ubuntu 12.04, my system had install 2 system -- winxp and ubuntu 10.10. Now, I want to update ubuntu to 12.04. I use usb disk to install 12.04. But, the installer can't not find my partition in my harddisk. But, the fdisk can find them. Can you help me? How to do? ubuntu@ubuntu:~$ sudo lshw -short H/W path Device Class Description system HP 2230s (NN868PA#AB2) /0 bus 3037 /0/9 memory 64KiB BIOS /0/0 processor Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz /0/0/1 memory 2MiB L2 cache /0/0/3 memory 32KiB L1 cache /0/0/0.1 processor Logical CPU /0/0/0.2 processor Logical CPU /0/2 memory 32KiB L1 cache /0/4 memory 2GiB System Memory /0/4/0 memory SODIMM [empty] /0/4/1 memory 2GiB SODIMM DDR2 Synchronous 800 MHz (1.2 ns) /0/100 bridge Mobile 4 Series Chipset Memory Controller Hub /0/100/2 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/2.1 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/1a bus 82801I (ICH9 Family) USB UHCI Controller #4 /0/100/1a.1 bus 82801I (ICH9 Family) USB UHCI Controller #5 /0/100/1a.2 bus 82801I (ICH9 Family) USB UHCI Controller #6 /0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #2 /0/100/1b multimedia 82801I (ICH9 Family) HD Audio Controller /0/100/1c bridge 82801I (ICH9 Family) PCI Express Port 1 /0/100/1c.1 bridge 82801I (ICH9 Family) PCI Express Port 2 /0/100/1c.1/0 wlan1 network PRO/Wireless 5100 AGN [Shiloh] Network Connection /0/100/1c.2 bridge 82801I (ICH9 Family) PCI Express Port 3 /0/100/1c.4 bridge 82801I (ICH9 Family) PCI Express Port 5 /0/100/1c.5 bridge 82801I (ICH9 Family) PCI Express Port 6 /0/100/1c.5/0 eth1 network 88E8072 PCI-E Gigabit Ethernet Controller /0/100/1d bus 82801I (ICH9 Family) USB UHCI Controller #1 /0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Controller #2 /0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Controller #3 /0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #1 /0/100/1e bridge 82801 Mobile PCI Bridge /0/100/1f bridge ICH9M LPC Interface Controller /0/100/1f.2 scsi0 storage 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] /0/100/1f.2/0 /dev/sda disk 500GB WDC WD5000BEVT-0 /0/100/1f.2/0/1 /dev/sda1 volume 48GiB Windows NTFS volume /0/100/1f.2/0/2 /dev/sda2 volume 416GiB Extended partition /0/100/1f.2/0/2/5 /dev/sda5 volume 97GiB HPFS/NTFS partition /0/100/1f.2/0/2/6 /dev/sda6 volume 198GiB HPFS/NTFS partition /0/100/1f.2/0/2/7 /dev/sda7 volume 27GiB Linux filesystem partition /0/100/1f.2/0/2/8 /dev/sda8 volume 93GiB Linux filesystem partition /0/100/1f.2/1 /dev/cdrom disk CDDVDW TS-L633M /0/1 scsi6 storage /0/1/0.0.0 /dev/sdb disk 15GB STORAGE DEVICE /0/1/0.0.0/0 /dev/sdb disk 15GB /0/1/0.0.0/0/1 /dev/sdb1 volume 14GiB Windows FAT volume /1 power HZ04037 ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x31263125 Device Boot Start End Blocks Id System /dev/sda1 * 63 102277727 51138832+ 7 HPFS/NTFS/exFAT /dev/sda2 102277728 976784129 437253201 f W95 Ext'd (LBA) /dev/sda5 102277791 307078127 102400168+ 7 HPFS/NTFS/exFAT /dev/sda6 307078191 724141151 208531480+ 7 HPFS/NTFS/exFAT /dev/sda7 724142080 781459455 28658688 83 Linux /dev/sda8 781461504 976771071 97654784 83 Linux Disk /dev/sdb: 15.9 GB, 15931539456 bytes 64 heads, 32 sectors/track, 15193 cylinders, total 31116288 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009eb92 Device Boot Start End Blocks Id Systemfile:///home/ubuntu/Pictures/Screenshot%20from%202012-07-07%2010:25:40.png /dev/sdb1 * 32 31115263 15557616 c W95 FAT32 (LBA) ubuntu 12.04 installer can't find the partition in my hard disk, only find device - /dev/sda.(sorry, I'm new user, so can't send image.)

    Read the article

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • Appropriate design / technologies to handle dynamic string formatting?

    - by Mark W
    recently I was tasked with implementing a way of adding support for versioning of hardware packet specifications to one of our libraries. First a bit of information about the project. We have a hardware library which has classes for each of the various commands we support sending to our hardware. These hardware modules are essentially just lights with a few buttons, and a 2 or 4 digit display. The packets typically follow the format {SOH}AADD{ETX}, where AA is our sentinel action code, and DD is the device ID. These packet specs are different from one command to the next obviously, and the different firmware versions we have support different specifications. For example, on version 1 an action code of 14 may have a spec of {SOH}AADDTEXT{ETX} which would be AA = 14 literal, DD = device ID, TEXT = literal text to display on the device. Then we come out with a revision with adds an extended byte(s) onto the end of the packet like this {SOH}AADDTEXTE{ETX}. Assume the TEXT field is fixed width for this example. We have now added a new field onto the end which could be used to say specify the color or flash rate of the text/buttons. Currently this java library only supports one version of the commands, the latest. In our hardware library we would have a class for this command, say a DisplayTextArgs.java. That class would have fields for the device ID, the text, and the extended byte. The command class would expose a method which generates the string ("{SOH}AADDTEXTE{ETX}") using the value from the class. In practice we would create the Args class as needed, populate the fields, call the method to get our packet string, then ship that down across the CAN. Some of our other commands specification can vary for the same command, on the same version, depending on some runtime state. For example, another command for version 1 may be {SOH}AA{ETX}, where this action code clears all of the modules behind a specific controller device of their text. We may overload this packet to have option fields with multiple meanings like {SOH}AAOC{ETX} where OC is literal text, which tells the controller to only clear text on a specific module type, and to leave the others alone, or the spec could also have an option format of {SOH}AADD{ETX} to clear the text off a a specific device. Currently, in the method which generates the packet string, we would evaluate fields on the args class to determine which spec we will be using when formatting the packet. For this example, it would be along the lines of: if m_DeviceID != null then use {SOH}AADD{ETX} else if m_ClearOCs == true then use {SOH}AAOC{EXT} else use {SOH}AA{ETX} I had considered using XML, or a database to store String.format format strings, which were linked to firmware version numbers in some table. We would load them up at startup, and pass in the version number of the hardwares firmware we are currently using (I can query the devices for their firmware version, but the version is not included in all packets as part of the spec). This breaks down pretty quickly because of the dynamic nature of how we select which version of the command to use. I then considered using a rule engine to possibly build out expressions which could be interpreted at runtume, to evaluate the args class's state, and from that select the appropriate format string to use, but my brief look at rule engines for java scared me away with its complexity. While it seems like it might be a viable solution, it seems overly complex. So this is why I am here. I wouldn't say design is my strongest skill, and im having trouble figuring out the best way to approach this problem. I probably wont be able to radically change the args classes, but if the trade off was good enough, I may be able to convince my boss that the change is appropriate. What I would like from the community is some feedback on some best practices / design methodologies / API or other resources which I could use to accomplish: Logic to determine which set of commands to use for a given firmware version Of those command, which version of each command to use (based on the args classes state) Keep the rules logic decoupled from the application so as to avoid needing releases for every firmware version Be simple enough so I don't need weeks of study and trial and error to implement effectively.

    Read the article

  • Server cannot set status after HTTP headers have been sent IIS7.5

    - by marcinn
    Hi, Sometimes I get exception in my production environment: Process information Process ID: 3832 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information Exception type: System.Web.HttpException Exception message: Server cannot set status after HTTP headers have been sent. Request information Request URL: http://www.myulr.pl/logon Request path: /logon User host address: 10.11.9.1 User: user001 Is authenticated: True Authentication Type: Forms Thread account name: NT AUTHORITY\NETWORK SERVICE Thread information Thread ID: 10 Thread account name: NT AUTHORITY\NETWORK SERVICE Is impersonating: False Stack trace: at System.Web.HttpResponse.set_StatusCode(Int32 value) at System.Web.HttpResponseWrapper.set_StatusCode(Int32 value) at System.Web.Mvc.HandleErrorAttribute.OnException(ExceptionContext filterContext) at System.Web.Mvc.ControllerActionInvoker.InvokeExceptionFilters(ControllerContext controllerContext, IList(1) filters, Exception exception) at System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) at System.Web.Mvc.Controller.ExecuteCore() at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__4() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass1.<MakeVoidDelegate>b__0() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass8(1).<BeginSynchronous>b__7(IAsyncResult _) at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResult(1).End() at System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& ompletedSynchronously) I didn't noticed this error on my test environment what should I check? I am using ASP.NET MVC 2 (Release Candidate 2)

    Read the article

  • Exception on SslStream.AuthenticateAsClient (The message was badly formatted)

    - by Noms
    I have got wierd problem going on. I am trying to connect to Apple server via TCP/SSL. I am using a Client certificate provided by Apple for push notifications. I installed the certificate on my server (Win2k3) in both Local Trusted Root certificates and Local Personal Certificates folder. Now I have a class library that deals with that connection, when i call this class library from a console application running from the server it works absolutely fine, but when i call that class library from an asp.net page or asmx web service I get the following exception. A call to SSPI failed, see inner exception. The message received was unexpected or badly formatted. This is my code: X509Certificate cert = new X509Certificate(certificateLocation, certificatePassword); X509CertificateCollection certCollection = new X509CertificateCollection(new X509Certificate[1] { cert }); // OPEN the new SSL Stream SslStream ssl = new SslStream(client.GetStream(), false, new RemoteCertificateValidationCallback(ValidateServerCertificate), null); ssl.AuthenticateAsClient(ipAddress, certCollection, SslProtocols.Default, false); ssl.AuthenticateAsClient is where the error gets thrown. This is driving me nuts. If the console application can connect fine, there must be some problem with asp.net network layer security that is failing the authentication... not sure, perhaps need to add something or some sort of security policy in the web.config. Also just to point out that i can connect fine on my local development machine both with console and website. Anyone has got any ideas?

    Read the article

  • iPhone: Software Development And Distribution

    - by xsl
    I have a few quick questions about the iPhone software development. I did some research about the topic, but there are a few specific things I would like to ask here, because I will have to estimate the cost of the required hardware and software, before I am allowed to buy anything. I never did any Mac development nor have I ever owned an iPhone, so needless to say this is quite hard for me. I will buy an iMac mini with 2 GB RAM for iPhone development. I will have to use it at the same time as my regular PC, but the majority of the time I won't use the Mac at all. Do I have to buy an additional monitor, a mouse and a keyboard or is there a better solution? I will have to port a C library to the iPhone platform and develop an iPhone application that uses the ported library. Do I need anything else than the iPhone SDK to do this? If I use an external library (see above), can I test the application with the integrated emulator, or is it recommend to buy the device? In a later phase of the project I will have to buy an iPhone, but I will have to wait until the iPhone 4 is released here in Europe, because the application requires a camera. In addition to this I will have to send data to a remote webservice. Aside from these two things I don't require any other features. Can I just buy the iPhone online from another country (the iPhones here are sim locked), or should I buy one with a contract? When the application is ready, it will be installed on a few iPhones owned by our customer. Because of security reasons it is crucial that there is no third party involved in this process (i.e. the application should not be distributed on the app store). Is this possible?

    Read the article

  • Socket error 10052 on UDP socket

    - by Jesper
    We have a .NET 2.0 desktop application which sends and receives network packets over UDP. Several users have reported an occasional socket error 10052 which happens when the code calls socket.BeginReceiveFrom on a the UDP socket. What does this mean? The official MS documentation for socket error 10052 says - quote: "WSAENETRESET (10052) Network dropped connection on reset . The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress. It can also be returned by setsockopt if an attempt is made to set SO_KEEPALIVE on a connection that has already failed." This just doesn't make much sense for a UDP socket since UDP is a connectionless protocol. I know that another close error code 10054 in connection with UDP sockets means that an ICMP message "Port Unreachable" was received, and I am wondering if 10052 might map to another ICMP message? I have googled this for months, read network books, etc. but can't find anything. Please help - what does socket error 10052 on a UDP socket mean? Thanks in advance

    Read the article

  • Question about using ServiceModelEx's "WCFLogbook" from "Programming WCF Services" book

    - by Bill
    I am attempting to compile/run a sample WCF application from Juval Lowy's website (author of Programming WCF Services & founder of IDesign). Of course the example application utilizes Juval's ServiceModelEx library and logs faults/errors to a "WCFLogbook" database. Unfortunately, when the sample app faults, I get the following new error: "Cannot open database "WCFLogbook" requested by the login. The login failed. Login failed for user 'Bill-PC\Bill'." I suspect the error occurs as a result of not finding the "WCFLogbook" database, which I believe still needs to be created. Included in the library source directory, there are two files -WCFLogbookDataSet.xsd and WCFLogbook.sql; which neither seem to be referenced anywhere within the library code. This leads me to beleive that the sql and xsd files are there to be used to create the database somehow in SQL. Could someone please advise me if I am going in the correct direction here and if whether these files can be used to create the database (and if so, how)?

    Read the article

  • class weblogic.management.WeblogicMBean not found

    - by khue
    Hi all I meet this problem when I try to run Junit test case in fork mode (starting each test in a separate JVM) using Build ant file. [junit] Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/management/WebLogicMBean [junit] at java.lang.ClassLoader.defineClass1(Native Method) [junit] at java.lang.ClassLoader.defineClass(ClassLoader.java:621) [junit] at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124) [junit] at java.net.URLClassLoader.defineClass(URLClassLoader.java:260) [junit] at java.net.URLClassLoader.access$000(URLClassLoader.java:56) [junit] at java.net.URLClassLoader$1.run(URLClassLoader.java:195) [junit] at java.security.AccessController.doPrivileged(Native Method) [junit] at java.net.URLClassLoader.findClass(URLClassLoader.java:188) [junit] at java.lang.ClassLoader.loadClass(ClassLoader.java:307) [junit] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) [junit] at java.lang.ClassLoader.loadClass(ClassLoader.java:252) [junit] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) [junit] at java.lang.ClassLoader.defineClass1(Native Method) [junit] at java.lang.ClassLoader.defineClass(ClassLoader.java:621) [junit] at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124) [junit] at java.net.URLClassLoader.defineClass(URLClassLoader.java:260) [junit] at java.net.URLClassLoader.access$000(URLClassLoader.java:56) [junit] at java.net.URLClassLoader$1.run(URLClassLoader.java:195) [junit] at java.security.AccessController.doPrivileged(Native Method) [junit] at java.net.URLClassLoader.findClass(URLClassLoader.java:188) [junit] at java.lang.ClassLoader.loadClass(ClassLoader.java:307) [junit] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) [junit] at java.lang.ClassLoader.loadClass(ClassLoader.java:252) [junit] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) [junit] at java.lang.ClassLoader.defineClass1(Native Method) [junit] at java.lang.ClassLoader.defineClass(ClassLoader.java:621) [junit] at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124) [junit] at java.net.URLClassLoader.defineClass(URLClassLoader.java:260) [junit] at java.net.URLClassLoader.access$000(URLClassLoader.java:56) [junit] at java.net.URLClassLoader$1.run(URLClassLoader.java:195) .... I have the library weblogic.jar in my build library folders, which is set as classpath for the junit task. I look at this file and can't find the WeblogicMBean.class inside. However, in Jdev, I can import weblogic.management.WeblogicMBean into my class if I set library reference to this weblogic.jar file and compile my class without problem. Any suggestion of what really goes wrong? Thanks a lot.

    Read the article

  • Send Email via Google Apps in C#

    - by NateReid
    Hello, I am trying to send a basic email through Google Apps/Gmail using C# (System.Net.Mail/Framework 4) and I am having trouble doing so. I am receiving the following exception: "The operation has timed out." My code is below: //Create the mail message MailMessage mail = new MailMessage(); //Set the addresses mail.From = new MailAddress("[email protected]", "My Name"); mail.To.Add(Email); //Set the subject and bodycontent mail.Subject = "Email Testing"; mail.Body = "This is the body of the email"; //Send the message using the SmtpClient SmtpClient smtp = new SmtpClient(); smtp.EnableSsl = true; smtp.Send(mail); My web.config has the following settings: <smtp from="[email protected]" deliveryMethod="Network"> <network host="smtp.gmail.com" password="password" port="587" userName="[email protected]" /> </smtp> During my troubleshooting I have tried: Using my personal gmail address as well as another from a domain hosted through Google Apps. Using ports 25, 465, and 587 Hard coding the config settings in the c# code instead of using the web.config Sending and telneting from multiple network locations to ensure the firewall/ISP was not blocking it Ensured that POP was enabled in the GMail settings (according to Google this should turn on the ability to send using SMTP) Changing the send from and replyTo address to ensure they match the account (apparently a GMail necessity). I am able to send and receive email fine through the GMail interface for both of my email accounts. I have also tried the settings and solutions offered in Question # 757987 to no avail. Any suggestions would be greatly appreciated. Thanks all.

    Read the article

  • How to share session cookies between Internet Explorer and an ActiveX components hosted in a webpage

    - by jerem
    I am currently working on a .Net application which makes HTTP requests to some web applications hosted on a IIS server. The application is deployed through ClickOnce and is working fine on simple networks architectures. One of our customers has a very complex network involving a custom authentication server on which the user has first to log himself in order to be authenticated and get access to other applications on this network. Once authenticated on this server, a session cookie is created and sent to the user. Every time the user then makes a request on a secured server of the network, this cookie is checked to grant access to the user. If this cookie is not sent with the request, the user is redirected to the login page. The only browser used is Internet Explorer. This cookie cannot be accessed from our .net application since it is executed in another process than the Internet Explorer process which was used to log the user in, and thus is not sent with our requests, which cannot be completed since the server redirects every of our requests to the login page. I had a look at embedding my application into Internet Explorer by making the main control COM visible and creating it on an HTML page with an tag. It is working properly, however the sessions cookies set earlier in the browser are not sent when the ActiveX control makes web requests. I was hoping this sharing of the session information would be automatic (although I didn't really believe it). So my questions are : Is it possible to have access to this cookie in the embedded ActiveX? How? Does it make a difference to use a .Net COM-interop component instead of a "true" ActiveX control? Also, are there specific security words to describe this kind of behaviors (given that I am not an expert at all on security topics, this lack of proper terminology makes it a lot harder to find the needed resources)? My goal is to have my application's requests look the same from the requests made by the host browser's requests, and I thought that embedding the application as an ActiveX control into the browser was the only way to achieve this, however any suggestion on another to do this is welcome.

    Read the article

  • dbExpress error in Delphi 2010

    - by JosephStyons
    The below code works in Delphi 2007, but it gives me this error in Delphi 2010: --------------------------- Error --------------------------- Cannot load oci.dll library (error code 127). The oci.dll library may be missing from the system path or you may have an incompatible version of the library installed. --------------------------- OK Details >> --------------------------- The exception is raised when I set "connected" to "true". I have tried placing a copy of "oci.dll" in the same folder as the .exe file, but I get the same message. I also get this message when using the form designer and a visible TSQLConnection component. Any thoughts? function TDBExpressConnector.GetConnection(username, password, servername: string) : TSQLConnection; begin //take a username, password, and server //return a connected TSQLConnection try FSqlDB := TSQLConnection.Create(nil); with FSqlDB do begin Connected := False; DriverName := 'Oracle'; GetDriverFunc := 'getSQLDriverORACLE'; KeepConnection := True; LibraryName := 'dbxora30.dll'; ConnectionName := 'OracleConnection';; Params.Clear; Params.Add('DriverName=Oracle'); Params.Add('DataBase=' + servername); Params.Add('User_Name=' + username); Params.Add('Password=' + password); Params.Add('RowsetSize=20'); Params.Add('BlobSize=-1'); Params.Add('ErrorResourceFile='); Params.Add('LocaleCode=0000'); Params.Add('Oracle TransIsolation=ReadCommited'); Params.Add('OS Authentication=False'); Params.Add('Multiple Transaction=False'); Params.Add('Trim Char=False'); Params.Add('Decimal Separator=.'); LoginPrompt := False; Connected := True; end; Result := FSqlDB; except on e:Exception do raise; end; //try-except end;

    Read the article

< Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >