Search Results

Search found 23311 results on 933 pages for 'multiple computers'.

Page 469/933 | < Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >

• Windows Server 2003: Nat Port Forwarding Not Working

  - by jM2.me

  The setup is following: Internet (108.99.XXX.XX) <- Windows Server 2003 (10.0.0.1) <- Switch <- Office Computers (10.0.0.100-200 some static routes some manual some automatic) Windows Server has NAT installed on it and two network interfaces are configured properly. The problem is, whenever I try to forward port 80 (or any other) from office computer (lets say 10.0.0.100), it fails. Nic #1 Settings: All settings are obtained from ISP Nic #2 Settings: Set manually IP: 10.0.0.1 Mask: 255.255.255.0 Nat Server is configured to automatically assign IP addresses to private network. Settings are: IP: 10.0.0.0 Mask: 255.255.255.0 Forwarding was done in Routing and Remote Access (local) - IP Routing - NAT/Basic Firewall - Local Area Connection (right click_properties) - services and ports - Web Server HTTP - Private Address: 10.0.0.100 SO what is causing the problem of failure to forward any port from other computer inside private network?

  Read the article

• Where can I find a link to download the SP2 of OES2?

  - by Philippe

  Hi, I have a Netware Novell server with an eDirectory and different objects configured. I implemented an OEServer2 SP1 to emulate a DSfW to manage the eDirectory with AD. I join the domain with the Administrator login and I am logged as the Administrator domain. So far, there are no problems. When I open the MMC window on Windows Server 08 and snap in the "Active Directory Users and Computers" I can see all the OUs and objects presented in the Netware N. server. But, when I select some OUs I can have an error, and when I select other I don’t have this error. Error: “Data from XXXXX is not available from Domain Controller OES2.yyyy.local because: The server is unwilling to process the request. Try again later, or choose another DC by selecting Connect to Domain Controller on the Domain context menu.” With XXXX= OU’s name and yyyy.local= domain name and OES2 server name If somebody can upload this SP or post a link to download it... Thank you for your help!

  Read the article

• Select return dynamic columns

  - by Ascalonian

  I have two tables: Standards and Service Offerings. A Standard can have multiple Service Offerings. Each Standard can have a different number of Service Offerings associated to it. What I need to be able to do is write a view that will return some common data and then list the service offerings on one line. For example: Standard Id | Description | SO #1 | SO #2 | SO #3 | ... | SO #21 | SO Count 1 | One | A | B | C | ... | G | 21 2 | Two | A | | | ... | | 1 3 | Three | B | D | E | ... | | 3 I have no idea how to write this. The number of SO columns is set to a specific number (21 in this case), so we cannot exceed past that. Any ideas on how to approach this? A place I started is below. It just returned multiple rows for each Service Offering, when they need to be on one row. SELECT * FROM SERVICE_OFFERINGS WHERE STANDARD_KEY IN (SELECT STANDARD_KEY FROM STANDARDS)

  Read the article

• Drupal 6 - I am using drupal_execute to insert a CCK node into my site. Everything is working excep

  - by rdurbin

  $form_state['values']['field_prx_mp3_labels'][0][value] = $mp3_labels; $form_state['values']['taxonomy'][0][value] = array('tags'=>array('1'=>'Music')); $errs = drupal_execute('prx_content_node_form', $form_state, (object) $nodeTmp); This is a Drupal 6 site. I am using drupal_execute to create a node programatically. The first line is working for field_prx_mp3_labels. The second (for taxonomy) is not. Here is what my select on the node add for my cck looks like: <select name="taxonomy[2][]" multiple="multiple" class="form-select" id="edit-taxonomy-2" size="9"><option value="">- None -</option><option value="5">Music</option><option value="6">-Rock/Pop</option><option value="7">-Jazz/Blues</option><option value="8">-Classical</option><option value="9">-Music Documentaries</option><option value="10">-Festivals/Concerts</option><option value="11">Arts</option><option value="19">-Literature</option><option value="12">Nature</option><option value="13">History</option><option value="15">-Music</option><option value="14">Culture</option><option value="17">-American Indian</option><option value="18">-Latino</option><option value="16">-Youth Perspective</option></select> I have tried many many variations for line 2 (relating to the taxonomy). This comment seemed close but it hasn't worked for me: http://drupal.org/node/178506#comment-1155576 Thanks!

  Read the article

• safari 5 doesnt work on my computer.

  - by Amairani409

  I just got the new version of safari y downloaded because my mac tell me there was new version that I should be getting. but when I try to run my this new version of the aplication .nothing happends¡ I mean the program seems to be working but nothing apears in the screen and so when I try to see my top sites a little window show up but it just dont show anything. then 3 seconds later the program shut down¡ I dont know why is happening this Im not so a expert in computers but this really is away of all I see on safari and on mac I got Mac OS X version 10.5.8 2.66ghz intel core 2 duo 4gb 1067 MHz DDR3

  Read the article

• wake-up by the computer

  - by doug

  Hi there some time ago(10 years back) I've read on PC Magazine that some mainboards have some settings which allow to a computer to open at a certain hour. I need to make my computer to wake me up in each morning. How can I do that ? What MB settings allow this feature? ps: i will like to shout down the computer during the night(not sleep or hibernate mode). ATM I'm using windows xp and 7 on my computers.

  Read the article

• Installing a personal security certificate for Windows Server 2008 Terminal Services user

  - by Rick

  We use StoneEdge Order Manager, which runs under Microsoft Access, on several Windows computers as well as through Terminal Services on Windows Server 2008. Terminal Services users are unable to process credit cards using the First Data Global Gateway on the server. We have followed the necessary setup instructions provided under the user account, which involves adding a certificate in the Internet Options control panel. The Windows XP desktops require this to be done, or a generic 'unable to connect' message is shown when attempting to charge a card. On the server, this message is shown regardless of whether the certificate has been installed. Is there anything else that needs to be done that is specific to Windows Server that is not mentioned in the workstation instructions? Setup Instructions

  Read the article

• Outlook is trying to retrieve data from Microsoft Exchange

  - by Adrian Baker

  Some of my users on my network keep getting a pop up message saying "Outlook is trying to retrieve data from Microsoft Exchange". Microsoft Office 2003 is installed on these computers and when this message appears it freezes every users outlook. I have read some articles, and they say it a problem with 2002 and 2003 version of outlook. So I have changed some users Office to MS Office 2007 but still I have the same problem. This is become a big problem as it is happening often and users are getting annoyed. If anyone can give me some advise on how to solve this problem and what could be causing this problem I would be most grateful.

  Read the article

• Tree-like queues

  - by Rehno Lindeque

  I'm implementing a interpreter-like project for which I need a strange little scheduling queue. Since I'd like to try and avoid wheel-reinvention I was hoping someone could give me references to a similar structure or existing work. I know I can simply instantiate multiple queues as I go along, I'm just looking for some perspective by other people who might have better ideas than me ;) I envision that it might work something like this: The structure is a tree with a single root. You get a kind of "insert_iterator" to the root and then push elements onto it (e.g. a and b in the example below). However, at any point you can also split the iterator into multiple iterators, effectively creating branches. The branches cannot merge into a single queue again, but you can start popping elements from the front of the queue (again, using a kind of "visitor_iterator") until empty branches can be discarded (at your discretion). x -> y -> z a -> b -> { g -> h -> i -> j } f -> b Any ideas? Seems like a relatively simple structure to implement myself using a pool of circular buffers but I'm following the "think first, code later" strategy :) Thanks

  Read the article

• How are file permissions applied for shared drives?

  - by sleske

  I have two computers: A (running Windows Vista) B (running XP). I shared C: on computer A (as \\A\C ), and require a username (X) plus pw to access it. If I browse the the share \A\C on computer B, after entering username+pw I can access most folders, but one folder "\\A\C\F" gives me "permission denied". I looked at that folder's permissions on A, and it has full access permissons for all "Administrators". I use the account "A\X" to authenticate when accessing the share on A. X is a user account (on A) that is an "Administrator" according to Window's user management. Still, I cannot access this folder. If I explicitly add the "X" account to the accounts that may access folder F (under Properties / Security), I can access it without problems. I do not understand why I need to explicitly grant permission for X to get access to F. Is it not enough that X is an Administrator account?

  Read the article

• Windows 7 doesn't connect to mapped drives at start up.....

  - by danbo

  We are testing Windows 7 (32bit version) and logon to a windows 2003 domain that runs a logon script whichs maps our drive letters. We have no control over the domain. Of our 7 test users, 5 continually recieve red X's on their network drives after they logon. Double clicking on them connects the drives, however, any aplpication that requires files on the fileserver will fail since it thinks it has no connection to the drive. We have tried several reg edits (Enable Linked connections, KeepConn), we have tried to find information in the event viewer to no avail. We have also looked at any differences in NIC driver versions (none). The other 2 computers that can connect without problem are local admins, but, if we logon to the 5 that have the problem with the local admin credentials we get the red x's as well??? This one is a real head scratcher......

  Read the article

• Shares not working on boot need to reinstall "File and Printer Sharing for Microsoft Networks" on server every morning to fix

  - by Neaox

  I had a problem a few days ago see question here: Can no longer access computer or network shares to my server from any other computers on the network The fix that I found does in fact work however when I boot my PC in the morning the shares are no longer working, to fix this I need to remote desktop into the server and re-install "File and Printer Sharing for Microsoft Networks" on the main adaptor. Doing this makes the shares work again, however it is anoying to have to do this each and every morning. On top of this my offline files are no longer available offline: I store my user profile on the server and had them selected to be "Always Available" however since this has happened they are no longer available offline and the option to make them available offline from the context menu is no longer available. Another problem, and I don't know if this is the cause or just a tell of a deeper issue but this server runs hyper-v, since these problems I can no longer remote desktop into the hyper-v client. Thanks for any help anyone can give.

  Read the article

• Creating a portable PHP install?

  - by Xeoncross

  I would like to create a folder with a couple versions of PHP that I can start in cgi mode as needed. I use different windows machines for development and I would like to be able to move around computers without needing to install PHP on each one. Something like below F:/PHP /5.3.2 /5.2.8 /5.1.0 Then I could just start each up as needed with something like F:\php\5.3.2\php-cgi.exe -b 127.0.0.1:9000 Which would allow nginx or apache to use the PHP service. This would really help to make my development environment decoupled. Does anyone know how to create a portable PHP install?

  Read the article

• Can I find the session ID for a user logged on to another machine?

  - by Dan

  I want to open an application on another computer on the same network via the command line. The scenario here is that the user is in a room surrounded by about 20 computers and wants to be able to launch the same app on every computer without walking from screen to screen opening it up on each individual machine. I've discovered that I can get the basic functionality for this using PsExec as follows: psexec \\[computer] -u [username] -p [password] -d -i [SessionID] [program] For computer, username, password, and program, I'm good. Does anyone know of a way I can figure out which SessionID is assigned to a particular user logged on to a particular machine on the network? Alternately, is there a better way to go about what I'm trying to accomplish?

  Read the article

• Somebody knows why the sectors of the IBM floppy disk are named 1 to 8 (and not 0 to 7 )

  - by Olivier Briand

  I am now programming on a 8 bits Z80 computer with CP/M 2.2, (as a hobby) and the floppy disk format is IBM, 40 tracks, 8 sectors per track, 512 bytes per sector. free space is 154 Ko on each face of the disk. Why the sectors are indexed 1 to 8 (and not zero to seven, as usually is seen with computers)? The catalog of the floppy disk is on the track 1 (sector 1 to 4, 64 entries). I'm wondering is the catalog on track zero? Is the zero track reserved to included a system (as track 0 & 1 are reserved to the system on a CP/M floppy disk, and catalog is on track 2)?

  Read the article

• Duplicate of IPSEC certificate template not displaying

  - by Tim Brigham

  I am working on getting IPSEC working on computers outside my domain. I am unable to get a duplicate of the IPSec Offline Request template to show on the web interface. My CA is 2008 R2 Enterprise and the permissions on the template should be adequate to allow me access (my account has read and enroll). If I publish the original template it functions as desired. I also have other custom templates in use (although using autoenrollment). The duplicate is almost identical to the original, excepting that it has a longer validity period and the private key is marked as exportable. How do I debug at this point?

  Read the article

• Uploading to YouTube makes all browser tabs and devices disconnect

  - by fabsenet

  Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

  Read the article

• suggest AMD machine for software developement [closed]

  - by superb1

  I need a AMD machine (Processor, Motherboard, Ram, HDD ) for software developement .. I will mainly use microsoft visual studio 2010. Operating system would be windows 7 . Suggest decent machine but i dont want to overspend....i guess the rating system of ecommerce websites may help you to suggest !? I want you to suggest from this list : http://www.flipkart.com/computers/components/processor-20246?ref=bae2643a-2cc8-4710-942f-79e7fbc1b416 plz note basic criteria for vs 2010 is 1.6GHz or faster processor 1 GB (32 Bit) Ram 5400 RPM hard disk DirectX 9 capable video card running at 1024 x 768 or higher-resolution

  Read the article

• Do I need more RAM for programming if I switch to a 64 Bit OS?

  - by Buttercup

  Hi, Given that today (for performance reasons?) variables are usually aligned to the "bit-width" (I wanted to use "word-width" here, but on x86 a "word" is still 16 bits right?) of the processor, would switching from a 32 bit OS to its 64 bit version double the RAM usage? Would this then in turn mean that to do the same work a 32 bit OS can do with 4 GB RAM (well, the 3.x GB actually...) with a 64 bit OS I would need 8 GB of RAM for programming? Please note that I'm only talking about everyday x86 computers here.

  Read the article

• How can I set a network connection as metered?

  - by Sam

  I would like to set a network connection as metered. I can't find how to do this; it seems to have changed in the upgrade from Windows 8 to 8.1. I tried following the steps in the official metered connection FAQ. However, when I open the connection, there is no Data Usage heading nor a Set as a metered connection option. I tried this on two different computers, both running Windows 8.1. I also tried doing this for both wireless and ethernet adaptors. Here's what the connection screen looks like. I've cropped the empty space from the image. How can I set the connection to metered?

  Read the article

• Lan DNS not working after reinstall of Ubuntu 13.10

  - by DrorCohen

  I upgrade my Ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's host name. I get "Unknown Host". However pinging from another computer on the same lan - works fine (a laptop with 12.04 lts). for that matter every ping from the 13.10 to the local lan by hostname fails, ping with ip works. I don't have a local DNS server but somehow all the other computers in the network find each other by host name - only this new one fails... help appreciated...

  Read the article

• Importing Bookmarks from a Text File (to any browser/website)

  - by Gary Oldfaber

  I have dozens of text files containing around 60 url's each, accumulated over years of browsing on multiple computers. I wish to import these into any browser, to allow me to then use cross-browser importing. My ultimate goal is to then import the bookmarks to somewhere like delicious, which will automatically tag the links, allowing me to sort each page by subject. The closest I've managed to find is: Import bookmarks to firefox from txt file However while this plugin imports from a text file, it has no correlation with Firefox's bookmarks, and only allows you to export back to csv/txt files. I understand that the problem of importing from text files is that bookmarks need a Title, and so I wish to use a given pages existing title. I've been unable to find any such tool on the net.

  Read the article

• Use LAN to interface Synergy while having WiFi connected to internet

  - by freonix

  Similar question and solution I have LAN and WiFi connection, with the WiFi connected to internet and the LAN is simply connected via an Ethernet cable between two computers. I need to get Synergy working without compromising the WiFi internet. I've tried the solution above but couldn't seem to work. Both of the computer are running Windows XP. Even setting the LAN IP to static and under the same subnet doesn't seem to work. Anyone with similar situation and got Synergy to work? edit : Refined the question for clarity. Also, the computer are able to ping each other. Remote desktop can be accessed as well. I suspect the problem lies in Synergy's configuration.

  Read the article

• How to forward http traffic through a specific network adapter.

  - by user18129

  i have the following scenario. Two laptops are connected via a router through the Ethernet ports. These two computers need to be able to communicate together. One computer also needs to access the internet through a different adapter (i.e. we will taking these two laptops two various sites where by the most common type of internet access will be wireless).In isolation all of the various adapters work fine (i.e. the internal network works fine, and the wireless connects to the internet). However,we try to turn on all of the adapters at the same time,the following occurs: If we bridge the two network connections together on the "Server" -The internet connection doesn't work through the wireless If we don't bridge the connections The internet connections don't work It seems like http traffic is trying to be sent through the Ethernet adapter (which of course is not connected to an internet connection). How can we solve this?

  Read the article

• "Device not ready" on a network share in Windows 7

  - by user60689

  I have two computers C1 and C2 runing Windows 7 and both of them are members in a domain. On C1 I have an USB hard-disk which I shared for the users U1 and U2 giving them Read-Only permissions on the entire drive. However, even if I can see and browse the hard-disk localy (IOW from C1), from the other computer (C2) where I'm logged with U1, trying to access the C1's shared device, the C2's Windows 7 throws an error saying "Device Not Ready". Why? How can I fix this? PS: Tried to un-share and re-share again. No luck.

  Read the article

< Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >