Search Results

Search found 89616 results on 3585 pages for 'working set'.

Page 47/3585 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Broadcom BCM4313 working, but terribly slow

  - by Ataraxio Panzetta

  Hi all, I've installed ubuntu on a Asus 1015 netbook. Everything worked out of the box except for the Wireless adapter, which i had to install with the Additional Drivers application. It apparently installed fine and connects to our wireless network, but it only works at a "funny" speed range that goes from 367Bytes to a peak of 3Kb in its best moments. I know for sure the problem is neither the network nor the hardware. Network speeds are normal under windows on this laptop and in other computers with ubuntu aswell. lspci says the card is a BCM4313 model, but the Addittional Drivers Manager says these packecege contains Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322 based hardware seems like it installed the wrong driver... Is there anything I can do? I'm not concerned about compiling the driver or stuff like that, but I'm not sure on where to start... any help or guidance will be very, very appreciated.

  Read the article

• How do I set up multi seat?

  - by JJ Mcfly

  Hi I was hoping to have a 2 seat setup. One will be for my TV just going to run Boxee. The other is for my main Desktop. I've been looking for a good guide to help me navigate this, I'd like to use ubuntu 10.10. I am assuming it's just a case of getting a box + 2 graphics adaptors and 2 usb mice and keyboards, one of which will be bluetooth for the TV. I can't seem to find much documentation on this idea. Can anyone point me in the right direction? Also I am assuming that this is all possible with a standard ubuntu install, but with some additional configuration. Thank you in advance for any advice you can offer me JJ Mcfly

  Read the article

• How to Set Up Android Platform Development and Debugging

  eWeek offers a primer on how to develop for Android without using the Java-based SDK.

  Read the article

• How to Set Up Android Platform Development and Debugging

  eWeek offers a primer on how to develop for Android without using the Java-based SDK.

  Read the article

• After upgrading to Ubuntu 12.04, my broadcom wireless sta driver is not working

  - by Nuwan Aluwihare

  I upgraded my HP DV5-1000US Laptop to Ubuntu 12.04. But I cannot get it connected to the Wireless. I went through the settings, Hardware, Additional Drivers and it says that "No proprietary drivers are in use on this system". Also it says "Broadcom STA Wireless Driver" is not activated. I tried to activate it after got my laptop connected to the net through a wired connection, but it says "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log"

  Read the article

• dead keys not working in java app

  - by jippie

  The Arduino IDE is based on a java application called processing. While typing text into processing, it refuses to accept any of the characters under dead keys like " ' ^. As a work around I: Open another window (usually my browser or mail client); I type the character I need; Select and copy the character onto my clip board; Copy the character into processing. What do I have to do to make processing accept characters under dead keys? Disabling dead keys is not an option.

  Read the article

• EntSSO stopped working

  - by blomqvist

  My EntSSO (Enterprise Single Sign-On Server, part of BizTalk) did not start today, with the message: The SSO service failed to start. Error Code: 0x80131700 Could not create SSOSQL. To fix the problem, reinstall SSO or try 'regasm SSOSQL.dll' from a Visual Studio command prompt. Error Code: 0x80131700   The only reason for this that I can think of is that I have just installed the .net framework 4.0 RC but I have not verified this. The solution suggest in the error message works like a charm! Open a Visual Studio command prompt and run this command: regasm  ‘C:\Program Files\Common Files\Enterprise Single Sign-On\SSOSQL.dll’ Problem solved!

  Read the article

• Working Better With Ruby on Rails

  In the last four years, we have seen how Ruby on Rails (RoR) built on, and accelerated the wider acceptance of, the object-oriented Ruby language. Consequently, the Ruby/RoR combo has become a workho... [Author: Anthony Rainey - Computers and Internet - April 26, 2010]

  Read the article

• How to spawn a character at certain point and walk to a set point

  - by Robert H.

  I am making a game where I have a background image of a neighborhood. Each location has a different number of customers that are generated to walk on sidewalks. They all walk to a specific location (like a stand or cart that sells stuff), after they get to location I want them to interact with the cart. However, if another customer is already in a sale interaction then the others get in line in order of arrival. After the transaction the customers walk off screen. Any information on how I can do this and what game engine would be needed? Any one have any idea where I should go for this. I already have my game done up through Eclipse/Java without any game engine.

  Read the article

• Artec TV18R Tuner not working :(

  - by Antillar Maximus

  Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

  Read the article

• Is my robots.txt working as it should?

  - by TigerBlood

  I want crawlers to have access to http://www.example.com but not http://www.example.com/ My robots.txt is as follows: User-agent: * Allow: /$ Disallow: / My site is in google search results, but I am not coming up in Bing, Yahoo, etc. I have had the same robots.txt since last year, and I initially requested inclusion ~1 year ago, having also resubmitted the URL to those latter search engines several times since as well. Is my robots.txt blocking those other crawlers? And if so, why not google as well? Thanks in advance!

  Read the article

• Cannot set Chrome as default browser

  - by user1951615

  This has been asked before but there is no answer that works for me. The last answer I saw said to use System Settings. If I look there (Details, Default applications, Web), it says that Chrome IS my default browser. But every time I launch Chrome, it asks me again. If I look within Chrome under Settings, Default Browser, it says that it is not the default browser. There is a large button marked "Make Google Chrome the default browser" but, as someone else as already reported, this button has no effect. I am on the stable channel for Chrome. I tried making a comment to the existing thread but was unable to. That is why I am asking as a new question.

  Read the article

• Why isn't iTunes working for me?

  - by Sam Mercier

  I know you are to install iTunes in WINE but when ever I open it an error message appears that says Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2(Windows error 2) I have tried uninstalling the iTunes, re downloading it and repairing it. Nothing seems to work. Please help me here. Thank you.

  Read the article

• How to Automatically Run Programs and Set Reminders With the Windows Task Scheduler

  - by Chris Hoffman

  Do you want your computer to automatically run a program, remind you about something, or even automatically send emails? Use the Task Scheduler included with Windows – its interface can be a bit intimidating, but it’s easy to use. The Task Scheduler has a wide variety of uses – anything you want your computer to do automatically, you can configure here. For example, you could use the task scheduler to automatically wake your computer at a specific time. HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For?

  Read the article

• How to structure a set of RESTful URLs

  - by meetamit

  Kind of a REST lightweight here... Wondering which url scheme is more appropriate for a stock market data app (BTW, all queries will be GETs as the client doesn't modify data): Scheme 1 examples: /stocks/ABC/news /indexes/XYZ/news /stocks/ABC/time_series/daily /stocks/ABC/time_series/weekly /groups/ABC/time_series/daily /groups/ABC/time_series/weekly Scheme 2 examples: /news/stock/ABC /news/index/XYZ /time_series/stock/ABC/daily /time_series/stock/ABC/weekly /time_series/index/XYZ/daily /time_series/index/XYZ/weekly Scheme 3 examples: /news/stock/ABC /news/index/XYZ /time_series/daily/stock/ABC /time_series/weekly/stock/ABC /time_series/daily/index/XYZ /time_series/weekly/index/XYZ Scheme 4: Something else??? The point is that for any data being requested, the url needs to encapsulate whether an item is a Stock or an Index. And, with all the RESTful talk about resources I'm confused about whether my primary resource is the stock & index or the time_series & news. Sorry if this is a silly question :/ Thanks!

  Read the article

• Software center and update manager not working

  - by lmnop

  When I run update manager I always get this message "The action would require the installation of packages from not authenticated sources." details "libv4l-0 libv4lconvert0" I also can not get the software center to install anything. I get an error message telling me to check my internet connection but I am connected to the internet, shortly after I get an error message just like the one I get from update manager. How do I fix this?

  Read the article

• Logitech m510 mouse not working on 12.04 64bit

  - by Alonso

  When I run lsusb, this shows up: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver I have followed and done all of the stuff in: http://askubuntu.com/questions/154963/ubuntu-cannot-detect-my-logitech-wireless-m510-mouse Yet my mouse still fails to work. When trying to install HIDpoint, this appears after entering Y: libpng does not exist libtiff does not exist Gathering System information and generating a log Launching HIDPoint Installer ./hidpointsetup: error while loading shared libraries: libpng.so.3: cannot open shared object file: No such file or directory What can I do to fix this?

  Read the article

• Change X settings to boot into laptop with non working screen using an external monitor

  - by dassouki

  My laptop committed suicide. Is there a way I can boot into my ubuntu using an external screen? Ubuntu 10.10 video: Nvidia 9500 gm i think I can get dual screen upto and until the ubuntu login screen at which point it goes back into laptop display only. Then I can just type and enter my password. The system (i assume boots into ubuntu) but I got no way of going onto the x or nvidia settings to change my display to external monitor EDIT well I booted into terminal using control shift F1 i think, and now I'm trying to reporgram x.org, but strangely it seems bland with not a lot of settings in it EDIT 2 xrandr returns "Can't open display" EDit 3 after some messing around with xrandr and xinit ... my x.org only displays one monitor instead of two in its settings although both, i.e. the laptop and external screens are both connected. EDIT 4 it seems that x.org now has a "screen" and "monitor" section, I can't seem to be able to boot linux into monitor. I get a "Monitor is not a valid keyword" in this subsection

  Read the article

• OUYA and Unity set up problems

  - by Atkobeau

  I'm having trouble with the Unity / OUYA plugin. I'm using Unity 4 with the latest update on a Windows 7 machine. When I open the starter kit and try to compile the plugin I get the following error: Picked up _JAVA_OPTIONS: -Xmx512M And if I try to Build and Run I get this error: Error building Player: ArgumentException: Illegal characters in path. I'm stumped, I've gone through lots of forum posts here and on stackoverflow and I can't seem to resolve it. My environment variables look like this: PATH - C:\Users\dave\Documents\adt-bundle-windows-x86_64-20130219\sdk\tools; C:\Users\dave\Documents\adt-bundle-windows-x86_64-20130219\sdk\platform-tools\ JAVA_HOME - C:\Program Files (x86)\Java\jdk1.6.0_45\ Everything in the OUYA Panel is white Any ideas?

  Read the article

• Wireless not working with an Atheros AR9285

  - by Neeraj

  I recently installed Ubuntu 12.04 and found my wireless card is not detected by OS. I tired to detect it by network manager but still it is not get output of the required command: toor@Linux:~$ sudo lshw -class network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:9e:22:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=124.123.227.84 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:44 memory:f2400000-f243ffff ioport:2000(size=128) *-network UNCLAIMED description: Network controller product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f2500000-f250ffff and toor@Linux:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no Please let me know what more info is required to resolve it.

  Read the article

• Ubuntu 12.04 + Wifi not working

  - by user171154

  i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

  Read the article

• goober Networks, Now with Videoconferencing, Set for Full Release

  The Internet VoIP, messaging, and social networking service has partnered with GIPS for both voice and video technologies and is ready to shed beta status.

  Read the article

• MiniMax not working properly(for checkers game)

  - by engineer

  I am creating a checkers game but My miniMax is not functioning properly,it is always switching between two positions for its move(index 20 and 17).Here is my code: public double MiniMax(int[] board, int depth, int turn, int red_best, int black_best) { int source; int dest; double MAX_SCORE=-INFINITY,newScore; int MAX_DEPTH=3; int[] newBoard=new int[32]; generateMoves(board,turn); System.arraycopy(board, 0, newBoard, 0, 32); if(depth==MAX_DEPTH) { return Evaluation(turn,board);} for(int z=0;z<possibleMoves.size();z+=2){ source=Integer.parseInt(possibleMoves.elementAt(z).toString()); System.out.println("SOURCE= "+source); dest=Integer.parseInt(possibleMoves.elementAt(z+1).toString());//(int[])possibleMoves.elementAt(z+1); System.out.println("DEST = "+dest); applyMove(newBoard,source,dest); newScore=MiniMax(newBoard,depth+1,opponent(turn),red_best, black_best); if(newScore>MAX_SCORE) {MAX_SCORE=newScore;maxSource=source; maxDest=dest;}//maxSource and maxDest will be used to perform the move. if (MAX_SCORE > black_best) { if (MAX_SCORE >= red_best) break; /* alpha_beta cutoff */ else black_best = (int) MAX_SCORE; //the_score } if (MAX_SCORE < red_best) { if (MAX_SCORE<= black_best) break; /* alpha_beta cutoff */ else red_best = (int) MAX_SCORE; //the_score } }//for ends return MAX_SCORE; } //end minimax I am unable to find out the logical mistake. Any idea what's going wrong?

  Read the article

• Unity 3D not Working on Acer D270 w/ Intel GMA 3600

  - by amol.kamath

  I recently bought myself an Acer Aspire One D270 with the GMA 3600 graphics chipset thinking I would get some lovely graphics. However, I am stuck using Unity 2D and I cant figure out how to enable 3D. None of the fixes I have found so far have worked. Another effect of this is that I cant change the backlight brightness. So whenever I open the lid, looking at the screen is like staring into the sun. Is there a driver for it in the works? Does the 3.4 kernel support the chipset and most of all is there a way to fix this? Please help

  Read the article

• How to set up bridged networking in Xen?

  - by Joe Carr

  I have 2 domU virtual machines installed on a 11.10 Oneiric Dom0. My internal network is on the 192.168.1 subnet, and when the domU's start, they get ips on the 192.168.122 subnet. I have attempted to follow the instructions here : http://wiki.kartbuilding.net/index.php/Xen_Networking xend-config.sxp is configured correctly, but neither of my domU's have a config file in /etc/xen to modify. ifconfig reports that I have the following devices : eth0, lo, tap3.0, vif3.0, vif4.0, virbr0 bridge-utils is installed. I also just attempted to follow these steps : http://serverfault.com/questions/233201/bringing-the-xenbr0-interface-up-on-xen-under-ubuntu-8-04 sudo brctl addbr xenbr0 sudo brctl addif xenbr0 vif3.0 device vif3.0 is already a member of a bridge; can't enslave it to bridge xenbr0. Any ideas on next steps are greatly appreciated!

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >