Search Results

Search found 17366 results on 695 pages for 'memory card'.

Page 471/695 | < Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >

• Cannot enable Additional drivers for Broadcom in 12.10

  - by Compt

  tl;dr version: Additional Drivers does not work for enabling a driver in Ubuntu 12.10, however it worked in 12.04. I upgraded to Ubuntu 12.10 from 12.04 via a live USB. I did a fresh install to avoid any conflicts. From 12.04 I know that my wireless card has proprietary drivers that could be installed via Additional Drivers. I did eventually find additional drivers in the software sources menu, however when I attempt to switch to Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source, it not only does not work, it in fact disables my wireless completely. The only way to revert this is to restart, and revert back to "do not use the device". Then upon another restart, my wireless will function once again. I was curious if anyone else had this issue, and if there was a fix for it as of yet. I looked on launchpad and it may be a potential bug, but I am unsure. Any help would be greatly appreciated (and sorry for that wall of text). Until then, I'll continue to use my wireless as it is (or revert to 12.04), but I do notice a slower connection without it enabled.

  Read the article

• Screen doesn't turn back on after resume on a Lenovo Thinkpad T420

  - by Wojtek

  Every time I suspend my notebook (Lenovo Thinkpad T420 - Intel HD graphic card) on Oneiric Ocelot 11.10 and turn it back on, the screen is black. The backlight is on and the system itself loads fine, but the display somehow doesn't get back. The first time after a fresh reboot the screen isn't black, it is mostly white/light-gray and it looks a bit like a distorted image. The pixels fade in until it gets almost completely light-gray. I've got a workaround for this: I switch to the first terminal (CTRL+ALT+F1) and back to X (CTRL+ALT+F7). In most cases that helps. Sometimes, when there's still a problem, I log in on the first terminal and run "unity --reset". Then go back to X - this helps always. I can tell that the system comes back, because I can log in with my fingerprint reader (or wait a bit and put in the password) "blindly", then do the workaround - I am logged in after the screen comes back. So it's only the display that is not working. Any help or advice where to look would be appreciated.

  Read the article

• Freescale One Box Unboxing (then installing Java SE Embedded technology)

  - by hinkmond

  So, I get a FedEx delivery the other day... "What cool device could be inside this FedEx Overnight Express Large Box?" I was wondering... Could it be a new Linux/ARM target device board, faster than a Raspberry Pi and better than a BeagleBone Black??? Why, yes! Yes, it was a Linux/ARM target device board, faster than anything around! It was a Freescale i.MX6 Sabre Smart Device Board (SDB)! Cool... Quad Core ARM Cortex A9 1GHz with 1GB of RAM. So, cool... I installed the Freescale One Box OpenWRT Linux image onto its SD card and booted it up into Linux. But, wait! One thing was missing... What was it? What could be missing? Why, it had no Java SE Embedded installed on it yet, of course! So, I went to the JDK 7u45 download link. Clicked on "Accept License Agreement", and clicked on "jdk-7u45-linux-arm-vfp-sflt.tar.gz", installed the bad boy, and all was good. Java SE Embedded 7u45 on a Freescale One Box. Nice... Hinkmond

  Read the article

• How can I refresh/reinstall/clear/set-to-default my bootup process?

  - by Tchalvak

  I'm currently having a problem with my bootup process that is growing progressively worse as time goes on: While booting, it does a few minutes of hard-drive reading. During that, instead of showing a boot splash screen, it shows various dashes and dots, as if the video card isn't recognizing. The splash screen actually has colors similar to the splash screen (purple), it simply is garbled. It then does a few minutes of hard-drive reads, and if I leave it long enough, sometimes it boots into the desktop (and auto-logs-in). Sometimes, unfortunately, it just hangs on that garbled screen and reads from the hard-drive forever. Notably, I've also stopped being able to access grub during bootup (perhaps it is just not displayed correctly by the video, hard to tell). This is a symptom that has grown over the course of various ubuntu upgrades, at least I suspect that the upgrade process is leaving behind cruft. So, is there a safe way for me to "refresh" the boot system so that it is clean, new, fast, and reliable? For example, to test out a cleanly configured boot, make sure that it works (try before I buy), and then apply it to the system to eliminate as much of this problem as possible? Edit: Here is the requested bootchart: http://imgur.com/9jocF

  Read the article

• Game: Age of Empires sound good but video "out of range"

  - by Ezekiel

  I'm new to the Ubuntu realm. Currently i'm using Linux Mint 12 with Wine 1.4 and PLAYONLINUX as game loading/playing programs. Video card is MSI GeForce FX5200 (NVIDIA) and is 3d enabled. I can play "Call of Duty 5 demo just fine. My real love is the Age of Empires series games. I loaded the WINE version of AOE 1 demo. No sound and no picture. Black screen with "Out of Range" window in red. I loaded my CD version of AOE 1 through PLAYONLINUX. I get the sound just fine but again the black screen with "Out of Range" window in red. I have used all the monitor settings in both the "settings" and in winecfg. None of the eight monitor options worked in any combination. I have checked all the questions and blogs on this error and tried all I found and no one seems to come up with a real fix. I guess I need to know exactly what the "Out of Range" means. Any help? Anywhere? Thanks

  Read the article

• How to help FGLRX detect a device

  - by user113416

  I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev Thanks in advance.

  Read the article

• Does your organization still use the term "screens" to describe a user interface?

  - by bit-twiddler

  I have been in the field long enough to remember when the term "screen" entered our lexicon. As difficult as it is to believe, the early systems on which I worked had no user interface (UI), that is, unless one counts a keypunch machine and job listings as a user interface. These systems ran as "card image" production jobs back in a day when being a computer operator required a reasonably deep understanding of how computers worked. Flashing forward to today: I cringe every time I hear a systems practitioner use the term "screen." The metaphor no longer fits the medium. The term somewhat fit back when the user dialog consumed 100% of available monitor real estate; however, the term lost its relevance the moment we moved to windowed environments. With the above said, does your organization still use the term "screens" to describe an application's UI? Has anyone successfully purged the term from an organization? For those who do not use the term to describe UI dialog elements, what term do you use in place of “screen.”

  Read the article

• Microsoft Tag Tagged Me

  - by Brian Schroer

  I got EXTREMELY lucky last week and won an HP Mini 311 notebook from a Microsoft Tag Twitter contest. I did my required tweet to enter last Tuesday, and one hour later received notification that I had won the weekly drawing. Apparently you can tweet up to 500 times (I pity the followers of those who do that), so it was really lucky that I won, and I sympathize with those who had been really trying. If you would like to try your luck, there are seven weekly prizes left, and you can find out about the contest here: http://tag.microsoft.com/ttcontest.aspx For a free PC, I thought it was the least I could do to find out what Microsoft Tag is. I was vaguely aware of those pastel-y triangle-y square things that look like someone put one of Don Johnson’s Miami Vice outfits through a shredder, and knew that the company I work for (one of the world’s largest consumer products companies) was looking into putting them on our products, packaging and advertising, but didn’t know much more about the technology. I thought they were just an improvement over bar codes, and would be used in retail store scanners, but I was mistaken. These tags are meant to be scanned by consumers using their mobile phones, to get instant access to information, websites, reviews, etc. Scanning a tag can open a web page, import a contact card, or dial a phone number, play a video… Tag reader software can be installed on Windows Mobile, iPhone, Symbian, Blackberry, Android, J2ME, and other phones (and I suspect that it will be available for Windows Phone 7 also :). There are built-in tracking, metrics and analysis tools, to help companies using Tag make decisions about their marketing expenditures. (And they don’t have to look Miami Vice-y – They can be customized to reflect the personality of the person or a brand.) Looks like interesting stuff. You can find out more at http://tag.microsoft.com.

  Read the article

• nvidia: switching dvi socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Can't run minecraft on ubuntu 12.04 lts [duplicate]

  - by user170011

  This question already has an answer here: How to correctly install and troubleshoot Minecraft (Client) 3 answers I was trying to run minecraft on my laptop with ubuntu 12.04 lts 64 bit. I have a lenovo ideapad p580 with 7.7 Gb and an Intel® Core™ i7-3520M CPU @ 2.90GHz × 4 processor. Under the graphics section of the system overview in ubuntu it says I have none installed. My computer comes with and nvidia geforce graphics card but it isnt recognized. When I start minecraft I get this crash report. ---- Minecraft Crash Report ---- // Shall we play a game? Time: 24/06/13 7:23 PM Description: Failed to start game org.lwjgl.LWJGLException: Could not init GLX at org.lwjgl.opengl.LinuxDisplayPeerInfo.initDefaultPeerInfo(Native Method) at org.lwjgl.opengl.LinuxDisplayPeerInfo.<init>(LinuxDisplayPeerInfo.java:52) at org.lwjgl.opengl.LinuxDisplay.createPeerInfo(LinuxDisplay.java:684) at org.lwjgl.opengl.Display.create(Display.java:854) at org.lwjgl.opengl.Display.create(Display.java:784) at org.lwjgl.opengl.Display.create(Display.java:765) at net.minecraft.client.Minecraft.a(SourceFile:235) at avv.a(SourceFile:56) at net.minecraft.client.Minecraft.run(SourceFile:507) at java.lang.Thread.run(Thread.java:679) A detailed walkthrough of the error, its code path and all known details is as follows: -- System Details -- Details: Minecraft Version: 1.5.2 Operating System: Linux (amd64) version 3.5.0-34-generic Java Version: 1.6.0_27, Sun Microsystems Inc. Java VM Version: OpenJDK 64-Bit Server VM (mixed mode), Sun Microsystems Inc. Memory: 406175448 bytes (387 MB) / 514523136 bytes (490 MB) up to 1908932608 bytes (1820 MB) JVM Flags: 2 total; -Xmx2048M -Xms512M AABB Pool Size: 0 (0 bytes; 0 MB) allocated, 0 (0 bytes; 0 MB) used Suspicious classes: No suspicious classes found. IntCache: cache: 0, tcache: 0, allocated: 0, tallocated: 0 LWJGL: 2.4.2 OpenGL: ~~ERROR~~ NullPointerException: null Is Modded: Probably not. Jar signature remains and client brand is untouched. Type: Client (map_client.txt) Texture Pack: Default Profiler Position: N/A (disabled) Vec3 Pool Size: ~~ERROR~~ NullPointerException: null I can run it on different versions of linux such as fedora.

  Read the article

• Windows 7 Phone Developer Tools CTP download

  - by mbcrump

  For those that don’t know, you can download the W7 Phone developer tools now. It is available here. I have installed it and wanted to share my experience so far. You can read the pre-release documentation here. First, here is what it comes with the install: The Windows Phone Developer Tools CTP includes the following: Visual Studio 2010 Express for Windows Phone CTP Windows Phone Emulator CTP Silverlight for Windows Phone CTP XNA 4.0 Game Studio CTP First impressions: No ISO image install (Bad for me because I use multiple machine and have to install from a bootstrapper. Its around 228mb download. I already have the VS2010 RC, but it still makes me install the VS2010 Express Edition. Windows Phone Emulator will only work with VS2010. No support for 05/08. Need at least a DX10 graphics compatible card. Final Word: (you are probably going to need this info) To start a new project, go to Installed Templates and select Silverlight for Windows Phone and Windows Phone Application. Use Silverlight for WPF style applications or XNA for W7 Games.

  Read the article

• The MsC gray zone: How to deal with the "too unexperienced on engineering/too under-qualified for research" situation?

  - by Hunter2

  Last year I've got a MsC degree on CS. On the beginning of the MsC course, I was keen on moving on with research and go for a PhD. However, as the months passed, I started to feel the urge to write software that people would, well, actually use. The programming bug had bitten me, again. So, I decided that before deciding on getting a PhD degree, I would spend some time on the "real world", working as a software developer. Sadly, most companies here in Brazil are "services" companies that seem to be stuck on the 80s when it comes to software development. I have to fend off pushy managers, less-than-competent coworkers and outrageous software requirements (why does everyone seem to need a 50k Oracle license and a behemoth Websphere AS for their CRUD applications?) on a daily basis, and even though I still love software development, the situation is starting to touch a nerve. And, mind you, I'm already lucky for getting a job at a place that isn't a plain software sweatshop. Sure, there are better places around here or I could always try my luck abroad, but then I hit the proverbial brick wall: Sorry, you're too unexperienced as a developer and too under-qualified as a researcher I've already heard this, and variations of that, multiple times. Research position recruiters look for die-hard, publication-ridden, rockstar PhDs, while development position recruiters look for die-hard, experience-ridden, rockstar programmers. To most, my MsC degree seems like a minor bump on my CV (and an outright waste of time for some). Applying for abroad positions is even harder, since the employer would have to deal of the hassle of a VISA process, which I understand that, sometimes, is too much. Now I'm feeling I've reached a dead-end. I'm certain that development (and not research) is my thing, so should I just dismiss my MsC (or play it as a "trump card") and play the "big fish on a small pond" role while I gather some experience and contribute on some open-source projects as a plus? Is there a better way to handle this?

  Read the article

• External monitor problems with Asus UX32VD in 12.04

  - by rsilva

  I've posted this video where I show one of the problems I'm facing with my UX32VD in regard of external monitors. As you can see as soon as I plugged the external monitor the laptop screen goes black and the external monitor displays a single color (color changes between red, green and blue). However this does not always happen. For instance if I reboot the laptop with the external monitor already plugged in I get to use it but not the laptop screen. In the Displays settings the laptop screen it's not even listed. Other times it just works. The to screens, without any problems. I tried with other to different external monitor and all this apparently random issues repeat, I even tried using HDMI cable instead. Same random behavior. This question seams to cover one of this issues however the answer did not helped me. I was forced to use the 3.5.2 kernel in order to use the Intel graphics card else the Gallium something was used. Also I've Bumblebee installed.

  Read the article

• How to have Windows 7 remember a password for a Domain

  - by Kelly Jones

  About eighteen months ago, I wrote a post covering how to clear saved passwords in Windows XP.  This week at work I was reminded how useful it is to not only deleted saved passwords, but to also setup wildcard credentials using this same interface. The scenario that I run into as consultant working at a client site, is that my laptop is not a member of the Windows Domain that my client uses to secure their network. So, when I need to access file shares, shared printers, or even the clients internal websites, I’m prompted for a name and password.  By creating a wildcard entry on my laptop (for the user account that the client issued to me), I avoid this prompt and can seamlessly access these resources.  (This also works when you’ve configured Outlook to access Exchange via RPC over HTTP.) How to create a credential wild card entry in Windows 7: Go to your Start Menu --> Type "user" into the Search box Click on the “Manage your credentials” in the column on the left Click on the “Add a Windows credential” link Enter the Domain (in my case my client’s domain), something like this: *.contoso.com Enter the username and password That’s it.  You should now be able to access resources in that Domain without being prompted for your name and password.  Please note: if you are required to change your password periodically for that domain, you’ll need to update your saved password as well.

  Read the article

• Visually and audibly unambiguous subset of the Latin alphabet?

  - by elliot42

  Imagine you give someone a card with the code "5SBDO0" on it. In some fonts, the letter "S" is difficult to visually distinguish from the number five, (as with number zero and letter "O"). Reading the code out loud, it might be difficult to distinguish "B" from "D", necessitating saying "B as in boy," "D as in dog," or using a "phonetic alphabet" instead. What's the biggest subset of letters and numbers that will, in most cases, both look unambiguous visually and sound unambiguous when read aloud? Background: We want to generate a short string that can encode as many values as possible while still being easy to communicate. Imagine you have a 6-character string, "123456". In base 10 this can encode 10^6 values. In hex "1B23DF" you can encode 16^6 values in the same number of characters, but this can sound ambiguous when read aloud. ("B" vs. "D") Likewise for any string of N characters, you get (size of alphabet)^N values. The string is limited to a length of about six characters, due to wanting to fit easily within the capacity of human working memory capacity. Thus to find the max number of values we can encode, we need to find that largest unambiguous set of letters/numbers. There's no reason we can't consider the letters G-Z, and some common punctuation, but I don't want to have to go manually pairwise compare "does G sound like A?", "does G sound like B?", "does G sound like C" myself. As we know this would be O(n^2) linguistic work to do =)...

  Read the article

• Pandaboard crash on startup or freeze after minutes

  - by Meach

  I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

  Read the article

• Hello PCI Council, are you listening?

  - by David Dorf

  Mention "PCI" to any retailer and you'll instantly see them take a deep breath and start looking for the nearest exit.  Nobody wants to be insecure, but few actually believe that PCI does anything more than focus blame directly on retailers.  I applaud PCI for making retailers more aware of the importance of security, but did you have to make them PAINFULLY aware?  POS vendors aren't immune to this pain either as we have to undergo lengthy third-party audits in addition to the internal secure programming programs.  There's got to be a better way. There's a timely article over at StorefrontBacktalk that discusses the inequity of PCI's rules, and also mentions that the PCI Council is accepting comments until April 15th. As a vendor, my biggest issue with PCI is that they require vendors to disclose the details of any breaches, in effect "ratting out" customers.  I don't think its a vendor's place to do this.  I'd rather have the trust of my customers so we can jointly solve the problem. Mary Ann Davidson, Oracle's Chief Security Officer, has an interesting blog posting on this very topic.  Its a bit of a long read, but I found it very entertaining and thought-provoking.  Here's an excerpt: ...heading up the list of “you must be joking” regulations are recent disturbing developments in the Payment Card Industry (PCI) world. I’d like to give [the] PCI kahunas the benefit of the doubt about their intentions, except that efforts by Oracle among others to make them aware of “unfortunate side effects of your requirements” – which is as tactful I can be for reasons that I believe will become obvious below - have gone, to-date, unanswered and more importantly, unchanged. I encourage you to read the entire posting, Pain Comes Instantly, and then provide feedback to the PCI Council.

  Read the article

• Why does Unity not extend to my 2nd monitor, even when it is displaying an X-Screen?

  - by Gridwalker

  I recently added a 2nd video card to my system, but unity refuses to extend my desktop over to the second screen. Although the secondary monitor initialises when I boot and I can move the mouse cursor over to the 2nd screen, the screen is otherwise blank (showing no wallpaper or interface elements) and I am unable to move any windows to this monitor. Moving the mouse cursor over to the 2nd monitor changes it from the default cursor to the old-style X cursor, such as the one that appears when you run X-kill, indicating that this screen is initialised in the X Server but that Unity is not recognising it. Although the Nvidia X Server Settings application can see both monitors, the unity systems settings application does not detect the 2nd adapter. Sometimes the additional drivers application can see both adapters, but it doesn't consistently show options for them both. Xrandr also fails to detect the 2nd monitor, but iNex lists both adapters. I have experimented with several different drivers for each adapter and with setting each of the graphics cards as the primary adapter in the BIOS, but this has made little difference. The two adapters are an onboard Geforce 8200 and a PCIE Geforce 7200 GX. The onboard adapter is currently set as the primary, however this adapter crashes whenever I use the Nouveau driver and I have to switch over to the PCIE as a primary whenever I purge the proprietary drivers (switching back when the 304 driver has been reinstalled). It doesn't matter which adapter I set as my primary, the results are the same : one screen showing the unity interface and one screen showing an X-Screen that only displays the mouse cursor. All I want is to be able to run this system in a dual screen configuration. I am not a gamer, nor do I require 3D rendering capabilities. Anything you can suggest to get the desktop to extend across both screens will be massively appreciated!

  Read the article

• Installing ubuntu 12.04 on macbook pro9,2

  - by stariz77

  I seem to have tried all the various suggested methods for installing ubuntu on a mbp, but can't seem to get anything that works and was wondering if anyone has run into any new problems with the latest non-retina models? I have a core i7 in my macbook, and model identifier is MacBookPro9,2. I have partitioned my HD using disk utility and have 700gig free space ready for the install (I haven't removed OSX Lion, it is still there in a 50gig partition). Problem: I am just getting a blank screen with a blinking cursor (unresponsive) in the top left whenever I boot from the disk. I left it for 20 minutes and nothing ever happened. This was without any boot manager, just holding "c" on startup. Attempted remedies: I have downloaded the 64 ubuntu iso from their site 3 times now and burned 4 separate discs to rule out some kind of corruption or burn error. I burned one in OSX Lion 10.7.4 and 3 on my windows 7 pc. I tried holding "alt" instead and then navigating to the windows disc to boot. Same thing happens, blank blinking unresponsive cursor. I also tried going to the EFI disc which actually brings up a menu (after saying "error prefix is not set") asking if I want to install ubuntu, test for errors or partition. All three options lead me to an unresponsive blank screen (some without cursors). I downloaded and installed rEFIt and if I hold "alt" on startup a linux penguin (Boot Linux from CD) appears in my boot options, along with the apple boot, and two others that I'm not sure of: "Boot EFI\boto\bootx64.efi from" and "Boot Legacy OS from". The "Boot Linux from CD" just takes me to the blank blinking cursor screen; again, I left if for 10+ minutes and nothing. I heard that the detection of the graphics card might be a problem and that I need change to nomodeset, but I have tried pressing F6 in all of the boot menus listed above and no options appear. Does anyone have any other suggested routes or can you see what I might have done wrong?

  Read the article

• Switching DVI socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Greeter login screen cropped login options in 12.04

  - by ammianus

  I have a pretty newly installed Ubuntu 12.04, using Unity. My external monitor is 1920x1080 max resolution. In the Unity desktop itself everything looks great. I have an NVidia graphics card. When I start my computer and get to the Unity greeter login screen the display is oddly formatted and the resolution seems off. It looks like a zoomed view on the larger 1920x1080 screen. As such it crops the login options off to the left hand side of the screen. So I can only just see the edge of the password box for the user I want to log in with. I can log in with one account by default by blindly typing the password, but I am unable to switch to other accounts. Is there anything I can do to fix the log in screen display so that I can see the normal login options? Note: I first noticed it when I changed my desktop background and the next time I logged in I saw the issue.

  Read the article

• Uninstalling ATI's drivers and installing NVIDIA's?

  - by whydidithavetobreak

  I replaced my card but I'm not sure how to set things up on Ubuntu. When the computer boots, it doesn't start GDM (I think that's what it's called). Instead, it asks me to log in the command line. If I try to do a startx, it tells me there is no AMD device connected or something to that extent. I originally installed the ATI drivers using the GUI. It said that I was using the limited drivers or something to that extent with a popup on the right of one of the taskbars, so I clicked there and updated it. I think it could also be reached by going to system administration restricted drivers or something close to that. I tried installing the nivida drivers by doing a "sudo apt-get install nvidia-glx-185" and then doing "sudo modprobe nvidia" and "sudo nvidia-xconfig" as this guy says but that didn't work. Modprobe couldn't find anything related to Nvidia and nvidia-xconfig wasn't an available command for me. Since I wasn't sure how to remove the ATI drivers I did that without messing with them. Not sure if that was a good idea.

  Read the article

• Thinkpad W510 with default graphics drivers shows weird brightness issues

  - by Chantz

  Hey guys, I am currently running 10.10 - 32 bit on a new Thinkpad W510 with nVidia Quadro FX 880M graphics card. I am running with the default graphics drivers that installed with ubuntu install. My problem is that when I am logging in the screen acts normally as far as birghtness is concerned. I can increase/decrease brightness with Fn keys. But few seconds after I log in screen goes pitch dark. Hitting Fn+Home flickers the screen to all the way bright, then all the way dark. This behavior continues until I reach maximum brightness, in which case the screen stays all the way bright, for a few more seconds and then again goes dark if there is no activity & the cycle continues. Have you guys faced any of these issues? If so any pointers on how to resolve it. I am not alone, on ubuntu forum I saw another person having the same issue - link but no solution. Please help! UPDATE I followed the instructions that htorque mentions in his answer and it worked.

  Read the article

• Hard time installing Ubuntu

  - by Nick

  I have a MSI GT780DXR that currently is booting windows 7. I've been trying to dual boot windows 7 and ubuntu for some time now. Here's specs that I think would make a difference Windows 7 500GB*2 RAID 0 hard drives. (Hardware RAID I'm not sure if it's a dedicated RAID card though) 7200RPM Nvidia GT570M Background: I tried to install 12.04 (64 bit) a few times but the Desktop live cd and pendrive boots with a black screen. I've tried wubi but it boots to a black screen as well. I then tried the alternative 12.04 (64 bit) and went through the installation all the way til partitioning. I let Ubuntu notice the raid setup and I setup my swap, /, and home drives, I used my free space to create the three partitions. I tried to resize the windows drive and it told me I couldn't and to be happy with my current setup. When I finally got past I got an error on installing GRUB 2 and decided to skip it and continued on to finish installation. When I tried to boot up I got an invalid partition table error. Windows recovery disc, and a GPARTED live cd couldn't find any hard drives. I ended up following advice and typed this into the recovery command prompt. bootrec /fixmbr bootrec /fixboot bootrec /rebuildBcd It worked and here I am now. The question is, how would I be able to dual boot windows 7 and Ubuntu 12.04 with this information? Thanks,

  Read the article

• Is using a dedicated thread just for sending gpu commands a good idea?

  - by tigrou

  The most basic game loop is like this : while(1) { update(); draw(); swapbuffers(); } This is very simple but have a problem : some drawing commands can be blocking and cpu will wait while he could do other things (like processing next update() call). Another possible solution i have in mind would be to use two threads : one for updating and preparing commands to be sent to gpu, and one for sending these commands to the gpu : //first thread while(1) { update(); render(); // use gamestate to generate all needed triangles and commands for gpu // put them in a buffer, no command is send to gpu // two buffers will be used, see below pulse(); //signal the other thread data is ready } //second thread while(1) { wait(); // wait for second thread for data to come send_data_togpu(); // send prepared commands from buffer to graphic card swapbuffers(); } also : two buffers would be used, so one buffer could be filled with gpu commands while the other would be processed by gpu. Do you thing such a solution would be effective ? What would be advantages and disadvantages of such a solution (especially against a simpler solution (eg : single threaded with triple buffering enabled) ?

  Read the article

< Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >