Search Results

Search found 17856 results on 715 pages for 'setup py'.

Page 471/715 | < Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >

• Store and Encrypt data over the internet.

  - by sotsec

  I am trying to build a system where I will be able to access my files remotely. I want to setup an external hard drive or a NAS that I will access over the internet, and I want every file that is stored on that system to be encrypted. Could you please suggest me what is the best way of doing that? Or if you have any knowledge, what is the best way to access your files remotely with maximum safety? but the same time the space that the files are allocated is protected against theft(encryption) etc. thank you

  Read the article

• Access server by hostname without domain

  - by projectshave

  I want to access services on other machines on my home network with just their hostname. In every browser, "http://machine" fails, but adding a period in "http://machine./" works. Is there a way to avoid adding that extra period? My setup is a router with DD-WRT w/ DNSmasq turned on, Win7 machines and several Ubuntu VMs. nslookup works fine with just hostname. Remote desktop works, but TightVNC needs the extra period. ssh needs the period. As I said, all my browsers need the extra period. I'd prefer a solution that doesn't require manually maintaining the hosts file. Thanks.

  Read the article

• create a CNAME record for AWS LoadBalancer DNS name

  - by t q

  I am trying to setup a loadBalancer on AWS. The A-Record it gave me looks like myLoadBalancer-**********.us-east-1.elb.amazonaws.com however when i try to put that in my domain registrars A-Record, i get an errorIP address is not valid. Must be of type x.x.x.x where x is 0-255. amazons solution is you should create a CNAME record for the LoadBalancer DNS name, or use Amazon Route 53 to create a hosted zone. route 53 gives me DNS numbers but if i use that then my email doesnt work from the registrar. question: is there a way to use route 53 and retain my emails? or should i create a CNAME record for the LoadBalancer DNS name, if so how do i do this ... not sure what this means?

  Read the article

• Resizing 2 partitions (NTFS and ReiserFS3)

  - by steven

  When creating a Win7 and Gentoo setup I miss allocated the space needed for Windows and Linux. I have a 320 gb drive and created a 40gb partition on Win7 and used the rest of the space on Linux. Now I need about 70gbs on the NTFS partition. Are there any tools that will shrink the ReiserFS3 partition? (It is using about 80gbs and has the reset free), while growing the NTFS partition? If I have to clone, does the tool copy freespace inside the image? I would prefer this not happen as that I'm sort on backup space. [I can handle a 100-150gb of images, but I can't copy the entire HD]

  Read the article

• wamp server does not start: Windows 7, 64Bit

  - by Ram

  I am trying to install wamp server (following is the exact setup name) on windows 7, 64Bit OS. But it never starts, icon stays in orange color meaning some services did not start. wampserver2.2e-php5.3.13-httpd2.2.22-mysql5.5.24-x64 I have been searching from last 3hours but did not find any solution. Port 80 is not in use. In windows services, when I try to start wampapache service manually, it throws following error: Windows could not start the wampapache service on Local Computer. Error 1053: The service did not respond ot the start or control request in a timely fashion. apache_error.log is empty. Things use to work fine in windows XP. May be this is a repeated thread, but I did go through similar posts. But nothing worked! Please help!!

  Read the article

• vmconvert exchange 2007

  - by user72950

  Has anyone tried to run vmconvert on a Windows 2008 64 bit server running Exchange 2007? Here is what I did. I stopped the Exchange processes and IIS and ran vmconvert. When I moved the new server to my vmware server 2.0 for windows and booted it. All seemed well except I could not send or receive email. All outbound was stuck in the queues. I was able to log in via OWA so that tells the network setup/NIC bindings were OK. Any ideas?

  Read the article

• How can I log in to a malfunctioning domain controller?

  - by Billy ONeal

  Hello :) I have a setup here with a single domain controller and 4 servers which were whithin it's domain. The servers were brought down and are being repurposed, but we would like to keep backups of the machines around. I am going through one by one and taking the backups, which requires that I login to these machines. I've been able to login to all the servers, except the domain controller. The domain controller itself seems to have not started all it's active directory services, and when one tries to login, it complains that the system cannot log you on now because the domain XXXXX is not available. How can I login to this box? Billy3

  Read the article

• Move MySQL master

  - by Noodles

  I currently have a master db server (lets call it db1) and 6 slaves (slave1-6). I've setup a new server (db2) as a slave of db1 and it's in sync. I want to change all the slaves to use db2 instead of db1, but with minimal downtime/data loss. At the moment the only way I can think of doing it is shutting down our website (so data stops being written to db1), waiting until all the slaves are up to date, flush logs on db1, shut it down. Reset master on db2, change all slaves to point to db2 with log position = 0. Is this the right way to do it or is there a way to do it without taking the site offline?

  Read the article

• How to use OpenVPN through a restrictive firewall?

  - by R.L. Stine

  I'm currently in the situation of attempting to setup OpenVPN on a personal VPS, for connection primarily through an overly restrictive firewall. All of the setups mentioned below work when used through a reasonably-firewalled connection. I have tried: OpenVPN running on the standard port OpenVPN running on port 443 (I start OpenVPN manually from the command line on the VPS and see that the server reports the connection being closed almost immediately, I assume this is a result of DPI on the firewall) STunnel running on port 443 to access OpenVPN and evade DPI. This is the most successful and allows a connection and internet access through the VPN for ~10-20 seconds, before the connection is forcibly closed. Is there anything else I can attempt?

  Read the article

• Very small image for rebuilds

  - by Deon

  I worked at a place last year that had a very small image for Windows XP re-builds. It was two Norton GHO files, totalling about 2-3 GB. This is how it worked: Boot into Norton Ghost Map to the network share where the images lived Apply the image to the workstation Reboot It would then load into Windows Setup Enter the Domain Admin credentials so it can join the domain That's it... it would then reboot into Windows and the image was complete. How did they make an image so small? Did they perhaps kick off a Windows install and create an image then? I particularly liked how it required no user input other than a domain admin login.

  Read the article

• KVM guest storage difference with NBD and NFS

  - by WojonsTech

  I am setting up my own little private cloud for my own use maybe for a project or to. I am using linux kvm on debian 6. I have 3 servers 2 of them for compute nodes and 1 storage node. I would I have already installed kvm made a few test machines got my networking setup. I have 2 nics on each server 1 nic is for web traffic other nic is for network traffic. My first Idea was to use NFS for storing the guest machines which can range in size, maybe 8gb maybe 100gb, it just depends. I was doing have heard of nbd before seems like it could work but I dont know what the performance differences are and if it will effect my enviroment, nfs looks like it will be easier to use.

  Read the article

• Started an application through SSH, command line now gone, what happens next?

  - by Chris Dutrow

  Context: This is a very basic question Using Putty and SSH for the first time to do some serious server setup and run into the situation where I have started a process that I do not want to stop. The process is the gunicorn WSGI HTTP Server (running on Centos 6.3). The command I used to start the process is (as per their Quick Start): gunicorn -w 4 myapp:app At this point in the work session, I have lost the command prompt. This must be such a non-issue that it doesn't even enter into an experienced user's consciousness. But unfortunately at my level of experience, I am left with several fundamental questions: Does the fact that I have lost the command prompt mean that the process is still running? How do I get back to the command prompt without killing the process? How do I come back and monitor the process later? How do I eventually kill the process? Any help is appreciated, thanks so much!

  Read the article

• Can't connect to server from certain machines

  - by Joel Coel

  On a small college campus we have a VLAN setup for the computer labs. These machines get assigned IP addresses in the 192.168.7.xxx range. In the server room, all of the server are on the default VLAN and assigned an IP address in the 10.1.1.xxx range. For the most part this works, but the lab machines are unable to connect to one of the servers. They can't even ping it. They can talk to other servers on the same switch as this server just fine. At first I thought it might be a vlan issue, but I changed the server port vlan to match other known-working ports with no effect. Any ideas?

  Read the article

• How to dual boot Ubuntu 12.10 and Windows XP sp3 on Dell Dimension 8250 desktop using 2 hard drives

  - by user106055

  I'd like instructions to dual boot Ubuntu 12.10 and Windows XP (sp3) on my desktop Dell Dimension 8250 (this is old and has 1.5 GB RAM which is maximum). I will be using 2 hard drives. Windows XP is already on a 120 GB drive and and Ubuntu 12.10 will go on a separate 80 GB hard drive. Both drives are IDE using a 80 conductor cable where the 40 pin blue connector connects to the motherboard. The middle connector is gray and is "normally" used for slave (device 1) and the black connector at the very end of the cable is meant for the master drive (device 0) or a single drive if only one is used. First, I do not wish the XP drive to have its boot modified by Ubuntu in any way. It should remain untouched...virgin. Let me know where the XP drive and the Ubuntu drive should be connected based upon the cable I've mentioned above, as well as jumper settings for both during the whole process. I'm just guessing, but should I remove the XP drive and put the empty Ubuntu drive in its place and install Ubuntu? By the way, I already have made the DVD ISO disk. For your information, the BIOS for this machine is version A03. When I tap F12 to get to the boot menu, I have the following choices: Normal (this will take me to a black screen with white type giving me the choice to boot to XP or to my external USB backup recovery drive) Diskette Drive Hard-Disk Drive c: IDE CD-ROM Drive (Note that if the CD Drive is empty, it will then go to the DVD drive) System Setup IDE Drive Diagnostics Boot to Utility Partition (This is Dell's various testing utilities) Thank you in advance for your help. Guy

  Read the article

• How do I upload large (30MB) files via a web interface?

  - by Dan

  Because I'm stumped... The client needs to be able to upload large images to a library but the upload fails after 5-6MB (over my poor connection). It seems to be timing out as the filesize at fail isn't consistent. The setup is a form which is accepted by PHP. I've googled and played with php.ini and everything is set for big uploads and long timeouts. Platform is a dedicated windows server at GoDaddy. What's going wrong?

  Read the article

• Internet connection resets (wifi), no device has wifi for moment

  - by Gizmo

  I have a few devices setup and I noticed this happens with both my old and new router (two different vendors&models) This happens occasionally, and I tried wireshark today and this cought my attention: No. Time Source Destination Protocol Length Info 69 6.464423000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.4? Tell 0.0.0.0 73 7.451146000 LiteonTe_59:65:94 Arcadyan_e1:8c:cf ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 85 9.450443000 LiteonTe_59:65:94 Arcadyan_e1:8c:cf ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 91 10.521000000 LiteonTe_59:65:94 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 93 10.860953000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.4 97 11.099463000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.4 where 192.168.2.254 is the gateway/router, 192.168.2.1 my laptop ip and 192.168.2.4 my sisters laptop.. what's happening here?

  Read the article

• adding ftp user on ubuntu

  - by user46250

  I followed this tut http://www.trainsignal.com/blog/how-to-set-up-safe-ftp-in-linux to setup an ftp server with user account sudo mkdir -p /home/ftp/ftpuser sudo useradd ftpuser -d /home/ftp/ftpuser -s /bin/false sudo passwd ftpuser when I tried to connect with login ftpuser remotely it didn't work. It didn't work even with root UNLESS I removed root from ftpusers. I am confused ftpusers are the users NOT allowed to do ftp ? Where are the list of users allowed then and why can't I connect with ftpuser I created ?

  Read the article

• Can I proxy my no-ip domain using a .htaccess file on my hosted domain?

  - by Dean

  I have a domain http://www.example.com which has a hosting package and website on it. I also have a http://example.no-ip.org domain which contains some content I would like to appear under the same domain. Can I setup a .htaccess file at http://www.example.com/proxy/ which proxies the files at http://www.example.no-ip.org/files/ Similarly, could I host an entire domain in the same way?, e.g. http://www.example2.com/ proxying http://example.no-ip.org/files2/ Alternatively, if someone were to say "That's stupid, use this free (or super-cheap) dynamic DNS host:" I would probably accept that answer.

  Read the article

• Is there a "pattern" or a group that defines *rc files in *nix environments?

  - by Somebody still uses you MS-DOS

  I'm starting to use command line a little more, and I see there are a lot of ways to configure some config files in my $HOME. This is good, since you can customize it the way you really like. Unfortunately, for begginners, having too many options is a little confusing. For example, I created .bash_alias for some alias I'm using. I didn't even know this option existed, I'm used to simply edit .bashrc. Do exist a pattern, a "good practice", envisioning flexibility and modularity in terms of rc files structure? Do exist a standardization group for this, or every body just creates it's own configuration setup?

  Read the article

• Keyboard/Mouse not working when windows vista has reached login screen

  - by Jonas

  I currently have a problem with a system (vista home premium, 64bit). USB kbd/mouse will not work when windows has booted/loaded their drivers and Im stuck at the login screen with no working input devices. None of the available boot options after F8 will boot to working kbd/mouse. They work in the bios setup and they seem powered all the way until a few seconds before the login screen. Legacy USB devices is also enabled in the bios. They also work with the recovery dvd, but I am unable to start the device manager to check or uninstall the mouse/kbd drivers. Cant get devmgmt.msc nor devmgr.dll (with rundll32) to work. System repair does not detect the problem and there are no available restore points (it was disabled). Any ideas?

  Read the article

• Joomla in Windows is catching my access to a Virtual Directory where I placed my MVC application

  - by Romias

  In our windows hosting we use the root (wwwroot) folder to host a JOOMLA website as public website. This is running IIS 7. Then, we created a virtual directory called "App" to host there a ASP.NET MVC4 application. When I enter www.mydomain.com it shows the joomla website correctly. When I enter www.mydomain.com/App/ it somehow access my MVC app... as I see the URL changing to www.mydomain.com/App/Account/LogOn?ReturnUrl=%2fApp%2f BUT shows a 404 Joomla error as if it were looking that URL in Joomla. BTW, the hosting has 2 ASP.NET IIS Setup options: 4.0 Classic and 4.0 integrated. Using the Integrated one... it displays a blank page... using the classic one shows the 404 Joomla page. Any idea where to look for this?

  Read the article

• getting started automating virtualization with powershell on windows

  - by fschwiet

  What are some good books or resources for learning automate virtual PCs on Windows DataCenter? I want to be able to build VPCs with both automated installs and from images, preferably via powershell. I would like to be able to setup an IIS environment for automated testing, and configure end user installs of different versions of Windows. I am not interested in corpnet type scenarios (active directory, domains, etc) so much for now. I'm comfortable with powershell and programming in general. I haven't yet installed Windows DataCenter, maybe once I install it will be clear enough. But looking for resources on how to managed virtual PCs programmatically I haven't found anything.

  Read the article

• Linux (lsusb) not showing String Descriptors of a USB device

  - by tzippy

  I have an embedded device that when plugged to a linux host, shows up with vid and pid that are not in the usb.ids file (proprietary IDs). However I provide String Descriptors that do show up when plugged into a Windows Host. But not on a Linux Host. lsusb -v shows only iManufacturer 3 iProduct 2 iSerial 1 But on the device side, when processing the setup requests, I see that the Strings are actually requested by the Host. By Windows and also the Linux Host. The USB Device Tree Viewwer under Windows shows this output: iManufacturer : 0x01 Language 0x0409 : "My Manufacturer" iProduct : 0x02 Language 0x0409 : "MyProduct" iSerialNumber : 0x03 Language 0x0409 : "My Serial" I feel that lsusb does not show all of the information. Is there a more informative tool?

  Read the article

• Windows Firewall 2008 Server - Allow only given IP in, block all others

  - by chumad

  I've got a Windows 2008 Server. It has the built-in windows firewall on it. I've played around with the Advanced settings where I can setup inbound/outbound rules, but it doesn't appear that I can create a rule that would say "Block All incoming traffic except traffic coming from this IP address" I created a rule that Blocks All, but there's no way that I've found to create a rule that will "override" the block rule and allow 1 or more IP's to get in. I accomplished this on a Win2k box using IPSEC, but it seems that IPSEC is now built-in to windows firewall. Any tips?

  Read the article

• Is there a postfix mysql virtual_maps append_at_origin workaround so I can pipe to external scripts?

  - by FilmJ

  I am using virtual domains, and I'd like to setup the server to alias to custom scripts. I manage all accounts using postfix mappings to mysql. It seems that postfix automatically appends a virtual domain regardless of how the forwarded/aliased result comes back. So even though i have: "|/bin/command" postfix is reading it as: "|/bin/command"@mydomain.com Is there any work-around, or setting I can fix? It would seem than append_at_myorigin=no would be ideal, but that's unsupported according to the documentation. Another option, maybe I can skip virtual aliases altogether and use the "/etc/postfix/aliases" table - assuming all emails go to the main domain. I'll try this, but if anyone has any other ideas how to make it work with virtual domains, please let me know as this would be very useful! Thanks.

  Read the article

< Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >