Search Results

Search found 26977 results on 1080 pages for 'input device'.

Page 475/1080 | < Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >

• Error 5 partition table invalid or corrupt

  - by Clodoaldo

  I'm trying to add a second SSD to a Centos 6 system. But I get the Error 5 partition table invalid or corrupt at boot. The system already has a single SSD (sdb) and a pair of HDDs (sd{a,c}) in a RAID 1 array from where it boots. It is as if the new SSD assumes one of the devices of the RAID array. Is it? How to avoid that or rearrange the setup? # cat fstab UUID=967b4035-782d-4c66-b22f-50244fe970ca / ext4 defaults 1 1 UUID=86fd06e9-cdc9-4166-ba9f-c237cfc43e02 /boot ext4 defaults 1 2 UUID=72552a7a-d8ae-4f0a-8917-b75a6239ce9f /ssd ext4 discard,relatime 1 2 UUID=8000e5e6-caa2-4765-94f8-9caeb2bda26e swap swap defaults 0 0 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 # ll /dev/disk/by-id/ total 0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 ata-ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:0 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:1 -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-name-localhost.localdomain:2 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a04d7241:8da6023e:f9004352:107a923a -> ../../md1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-a22c43b9:f1954990:d3ddda5e:f9aff3c9 -> ../../md0 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 md-uuid-f403a2d0:447803b5:66edba73:569f8305 -> ../../md2 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_OCZ-VERTEX3_OCZ-43DSRFTNCLE9ZJXX-part1 -> ../../sdb1 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3 -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMT49E3-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 scsi-SATA_ST3500413AS_5VMTJNAJ-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c500383621ff -> ../../sdc lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part1 -> ../../sdc1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part2 -> ../../sdc2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c500383621ff-part3 -> ../../sdc3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5000c5003838b2e7 -> ../../sda lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part1 -> ../../sda1 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part2 -> ../../sda2 lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5000c5003838b2e7-part3 -> ../../sda3 lrwxrwxrwx. 1 root root 9 Jun 15 23:50 wwn-0x5e83a97f592139d6 -> ../../sdb lrwxrwxrwx. 1 root root 10 Jun 15 23:50 wwn-0x5e83a97f592139d6-part1 -> ../../sdb1 # fdisk -l Disk /dev/sdb: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x79298ec9 Device Boot Start End Blocks Id System /dev/sdb1 1 14594 117219328 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d99de Device Boot Start End Blocks Id System /dev/sdc1 1 1275 10240000 fd Linux raid autodetect /dev/sdc2 * 1275 1339 512000 fd Linux raid autodetect /dev/sdc3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b3327 Device Boot Start End Blocks Id System /dev/sda1 1 1275 10240000 fd Linux raid autodetect /dev/sda2 * 1275 1339 512000 fd Linux raid autodetect /dev/sda3 1339 60802 477633536 fd Linux raid autodetect Disk /dev/md0: 10.5 GB, 10484641792 bytes 2 heads, 4 sectors/track, 2559727 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Disk /dev/md2: 489.1 GB, 489095557120 bytes 2 heads, 4 sectors/track, 119408095 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 524 MB, 524275712 bytes 2 heads, 4 sectors/track, 127997 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table # cat /etc/grub.conf default=0 timeout=5 splashimage=(hd2,1)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.32-220.17.1.el6.x86_64) root (hd2,1) kernel /vmlinuz-2.6.32-220.17.1.el6.x86_64 ro root=UUID=967b4035-782d-4c66-b22f-50244fe970ca rd_MD_UUID=f403a2d0:447803b5:66edba73:569f8305 rd_MD_UUID=a22c43b9:f1954990:d3ddda5e:f9aff3c9 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=br-abnt2 crashkernel=auto rhgb quiet initrd /initramfs-2.6.32-220.17.1.el6.x86_64.img

  Read the article

• Bandwidth monitoring with iptables for non-router machine

  - by user1591276

  I came across this tutorial here that describes how to monitor bandwidth using iptables. I wanted to adapt it for a non-router machine, so I want to know how much data is going in/coming out and not passing through. Here are the rules I added: iptables -N ETH0_IN iptables -N ETH0_OUT iptables -I INPUT -i eth0 -j ETH0_IN iptables -I OUTPUT -o eth0 -j ETH0_OUT And here is a sample of the output: user@host:/tmp$ sudo iptables -x -vL -n Chain INPUT (policy ACCEPT 1549 packets, 225723 bytes) pkts bytes target prot opt in out source destination 199 54168 ETH0_IN all -- eth0 * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 1417 packets, 178128 bytes) pkts bytes target prot opt in out source destination 201 19597 ETH0_OUT all -- * eth0 0.0.0.0/0 0.0.0.0/0 Chain ETH0_IN (1 references) pkts bytes target prot opt in out source destination Chain ETH0_OUT (1 references) pkts bytes target prot opt in out source destination As seen above, there are no packet and byte values for ETH0_IN and ETH0_OUT, which is not the same result in the tutorial I referenced. Is there a mistake that I made somewhere? Thanks for your time.

  Read the article

• Windows 7 Startup Problems with Ethernet Driver

  - by c00lryguy

  Everytime I restart Windows 7, my Ethernet Driver can't connect: And I have to go into Device Manager - Network Adapters and disable then enable the Realtek PCIe GBE Family Controller to connect to the internet. And now, lately everytime I start up, I've been getting this error: Why do these happen when I start up Windows?

  Read the article

• How can I change 'change' date of file?

  - by Someone1234

  How can I change 'change' date? $ touch -t 9901010000 test;stat test File: `test' Size: 0 Blocks: 0 IO Block: 4096 regular empty file Device: fe01h/65025d Inode: 11279017 Links: 1 Access: (0644/-rw-r--r--) Uid: ( 1000/ x) Gid: ( 1000/ x) Access: 1999-01-01 00:00:00.000000000 +0100 Modify: 1999-01-01 00:00:00.000000000 +0100 **Change: 2012-04-08 19:26:56.061614473 +0200** Birth: -

  Read the article

• Why is preserving the pitch in audio playback (allegedly) less performant?

  - by Markus Unterwaditzer

  In VLC for Android, i discovered an option to preserve the pitch during faster-than-normal playback: The "requires a fast device" obviously implies that faster playback is more performant when the pitch is changed too. Why is that so? What i've tried: Before posting this question i did some shallow research through Google. According to Wikipedia, there are several methods for faster playback of audio, the "simplest" one (Resampling) changes the pitch.

  Read the article

• Most common video format for devices

  - by Andrija

  I'm looking for most common video format that will run most of PDA's, ipod, iphone, symbian devices, google android, palm etc. I want to convert some divx movies, but I don't want to convert them again and again for new device. Thanks

  Read the article

• Create VPN between windows and sonic wall

  - by Chris Lively

  I'm trying to establish a VPN connection between our Windows 2008 R2 server and a client's SonicWall device. The problem is, I'm not entirely sure where to start. I thought I could just add it to RRAS but this doesn't appear to work (times out), I'm not entirely sure I did that right anyway. My server is hosted on an EC2 instance if that matters. My question then is how should I go about establishing this type of connection?

  Read the article

• e-reader's for pdf (nook, kindle, ipad, etc)

  - by Kevin

  Has anyone used e-readers to read technical doc/books saved as pdf? I have books saved in pdf formats and looking for a device to read them on other than my computer. example kindle, ipad, nook, etc

  Read the article

• MTD mtd3ro backup returns BCH decoding failed

  - by saeed144

  While doing a kernel backup of an mtd (Memory Technology Device) from /dev/mtd/mtd3ro of a TI board gives many "BCH decoding failed", Here are system info #cat /proc/mtd dev: size erasesize name mtd0: 00080000 00020000 "X-Loader" mtd1: 00140000 00020000 "U-Boot" mtd2: 000c0000 00020000 "U-Boot Env" mtd3: 00500000 00020000 "Kernel" mtd4: 1f880000 00020000 "File System" here is the method used, dd if=/dev/mtd/mtd3ro of=/data/local/tmp/mtd3.bin doing a cat also returns the same error, and here is the error, BCH decoding failed BCH decoding failed yes, the destination has enough space ;) tell me what do you think? Thanks

  Read the article

• Does a USB hub affect performance?

  - by user1018733

  I have two devices I want maximum throughput and latency with. (Midi drums and midi keyboard for example) Would connecting both to the same USB port via a hub effectively limit the maximum data transfer rate to 1/2 to each of them? I am assuming yes, but I didn't know if USB hubs had a handshaking and priority giving protocol available (e.g. let the device with the longer built up buffer of data communicate first) Thanks

  Read the article

• Trouble restoring an iPod touch backup

  - by stringo0

  I ran into some problems with my iPod, and am trying to restore a backup following this link - http://support.apple.com/kb/HT1414 I tried following the section under "Restoring your iPhone or iPod touch". When it gets to step 9, it simply doesn't show up - the restore happens, the iPod restarts, but I DO NOT get an option to set it up as a new device, or restore a backup. A backup does exist (checked the location). Any ideas on how I can restore the backup?

  Read the article

• Trackpad and USB mouse - different settings

  - by soupagain

  On my laptop I use both the trackpad and an external USB mouse. I'd like different settings for each device. e.g. the mouse is high resolution so I prefer to use a slow mouse settings, and for the trackpad I prefer to use the "Enhance pointer precision" option. But I can only seem to set these option for both devices, not individually. Can this be done? [Windows 7]

  Read the article

• How to set a static route for an external IP address

  - by HorusKol

  Further to my earlier question about bridging different subnets - I now need to route requests for one particular IP address differently to all other traffic. I have the following routing in my iptables on our router: # Allow established connections, and those !not! coming from the public interface # eth0 = public interface # eth1 = private interface #1 (10.1.1.0/24) # eth2 = private interface #2 (129.2.2.0/25) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth2 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the private interfaces iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT # Allow the two private connections to talk to each other iptables -A FORWARD -i eth1 -o eth2 -j ACCEPT iptables -A FORWARD -i eth2 -o eth1 -j ACCEPT # Masquerade (NAT) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Don't forward any other traffic from the public to the private iptables -A FORWARD -i eth0 -o eth1 -j REJECT iptables -A FORWARD -i eth0 -o eth2 -j REJECT This configuration means that users will be forwarded through a modem/router with a public address - this is all well and good for most purposes, and in the main it doesn't matter that all computers are hidden behind the one public IP. However, some users need to be able to access a proxy at 192.111.222.111:8080 - and the proxy needs to identify this traffic as coming through a gateway at 129.2.2.126 - it won't respond otherwise. I tried adding a static route on our local gateway with: route add -host 192.111.222.111 gw 129.2.2.126 dev eth2 I can successfully ping 192.111.222.111 from the router. When I trace the route, it lists the 129.2.2.126 gateway, but I just get * on each of the following hops (I think this makes sense since this is just a web-proxy and requires authentication). When I try to ping this address from a host on the 129.2.2.0/25 network it fails. Should I do this in the iptables chain instead? How would I configure this routing?

  Read the article

• What is an acceptable on-call agreement between employee and employer?

  - by jldugger

  IT is full of heroics; many of us carry a paging device, like Batman waiting in his cave for the Bat Signal. What's a fair compensation for on-call schedules? Is it acceptable to handle emergency requests on weekends or vacations?

  Read the article

• Conditional `mount` in Linux: dev or nfs

  - by o_O Tync

  I have a mount point — let it be /media/question — and two possible devices: a physical HDD and a remote NFS folder. Sometimes I plug the device in physically, in other cases I mount it via NFS. Is there a way to specify both of them in fstab so that executing mount /media/question will preferably choose physical volume, and when it's not available — NFS?

  Read the article

• Is it possible to trick iTunes treating an external HD as an iPod?

  - by Boris Pavlovic

  I keep my music collection on my iPod, but since I got my first iPhone two and a half years ago I have quit using the iPod as a portable music device. It's just an external HD. Benefit of having it as an external HD is that when it's connected to some other computer iTunes can play its music and update iTunes database. It would be nice if I could copy data from the iPod to an external USB HD and give away the iPod to somebody who doesn't have one.

  Read the article

• HTC Sync Manager and MKV files

  - by Zundrium

  My problem is pretty straight forward: HTC Sync manager works perfectly with my HTC One X. However, it filters extensions it's not able to use with it's stock applications. (HTC Sense) But 3rd party applications can handle other extensions of course. Is there a way to adjust the HTC Sync Manager so that extensions will not be filtered? And if that's not possible is there a syncronisation tool that synchronises automatically once the android device is connected through USB? (Tried Allway Sync, doesn't work properly)

  Read the article

• UDISKS instead of HAL

  - by MeJ

  Does anybody have some expirence with udisks, because HAL won't be longer supported on the most linux distribution, so I am thinking of to use udisks for UDI in $(hal-find-by-property --key storage.bus --string usb) do HAL_TMP=`hal-get-property --udi $UDI --key storage.removable.media_available` if [ "$HAL_TMP" = "true" ]; then HAL_DEV=$(hal-get-property --udi $UDI --key block.device) HAL_SIZE=$(hal-get-property --udi $UDI --key storage.removable.media_size) HAL_TYPE=$(hal-get-property --udi $UDI --key storage.drive_type) How do I have to adapt the above mentioned commands but use udisks instead of hal Thanks!

  Read the article

• Is there a peripheral that lets my computer monitor the connectivity of pairs of wires?

  - by raldi

  I've got a bunch of physical switches and circuits that act like switches (they're either connected to ground or they're just an open wire). Is there some sort of thing I can plug into my computer (ideally, via USB) that has a bunch of screw terminals, and I can attach wires to the screws and have the computer keep track of which circuits are closed and which are open? Bonus points if the device also lets the computer open and close switches, too. I don't even know what to google for.

  Read the article

• Enabling "USB Printing Support" in Windows 7

  - by Kevin Dente

  I'm trying to use an old parallel-port based printer with a USB-to-parallel port adapter on Windows 7. When I plug it into the USB port on the computer it's listed as an unrecognized device. I know that these cables typically use the "USB Printing Support" driver with makes USB ports show up as printer ports in the printer dialog. Is there a way to manually add USB Printing Support to Windows 7, since it isn't being added automatically?

  Read the article

• Ubuntu 12.04: Does grub support multidevice boot from btrfs?

  - by Propantriol

  I'm using Ubuntu 12.04 LTS (Precise Pangolin) with grub 1.99. I installed on a RAID10 multidevice BTRFS partition. I thought that multidevice support is included in grub for a while but on boot I'm dropped to a initramfs shell, because it fails to mount root ("invalid argument"). This is actually the same message I get if I want to mount a btrfs volume without executing btrfs device scan. Therefore I wonder: Does Ubuntu's grub version even support boot from btrfs mutlidevice ?

  Read the article

• Is it possible to use a PC as a external drive via USB?

  - by homemdelata

  I have a bluray player that has a USB interface that allows me to plug external hard drives and pendrives for me to play movies or music files. I was wondering if it's possible to have the PC or notebook or any other computer-like device using a USB-USB cable and make the bluray player detects this as an external drive. Note: I'm using a bluray player as example but it can be the same for DVD players, TV or sound sytems.

  Read the article

• How to mount LUKS partition securely on server

  - by Ency

  I'm curious if it is possible to mount a partition encrypted by cryptsetup with LUKS securely and automatically on Ubuntu 10.0.4 LTS. For example, if I use the key for the encrypted partition, than that key has to be presented on a device that is not encrypted and if someone steals my disk they'll be able to find the key and decrypt the partition. Is there any safe way to mount an encrypted partition? If not, does anything exist to do what I want?

  Read the article

• virtual box cannot detect removable drive

  - by user23950

  How do I solve this problem? I've already reset virtual box, but it doesnt really detect the flash drive, when I click on devices and select usb devices, it says that there are no device that are available

  Read the article

• can someone explain IOSTAT ouput?

  - by user37197

  i'am having IBM server with Redhat 5 ElsmP connected to the IBM Storage over iSCSI (in sdb ) can someone explain this output from iostat command avg-cpu: %user %nice %system %iowait %steal %idle 12.79 0.01 4.53 72.22 0.00 10.45 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 95.63 48.88 240.95 485589164 2393706728 sdb 29.20 350.49 402.08 3481983365 3994494696 move large file to sdb very slowly,it seem normaly?

  Read the article

< Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >