Search Results

Search found 41379 results on 1656 pages for 'command line'.

Page 476/1656 | < Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >

• Why 2 versions of jetty maven plugins ?

  - by Flueras Bogdan

  Hello, I set up a new webapp maven project and wanted to test it with jetty's maven plugin. So issuded in the console the command: mvn jetty:run After defining the pluginGroup in Maven's setting file I ran once again the command. Unfortunately, it failed because i was using one of the below mentioned versions of the plugin. The first has artifact id: maven-jetty-plugin and the 2nd:jetty-maven-plugin. Why there are 2 maven based plugins for achieving the same thing - running jetty? Why do they have to bring so much confusion? Or be so kind as to explain me the differences between them. Thank you.

  Read the article

• How (and where) to get aligned tRNA sequences (and import it into R)

  - by Tal Galili

  (This is a database / R commands question) I wish (for my thesis work), to import tRNA data into R and have it aligned. My questions are: 1) What resources can I use for the data. 2) What commands might help me with the import/alignment. So far, I found two nice repositories that holds such data: http://trnadb.bioinf.uni-leipzig.de/Resulthttp://trnadb.bioinf.uni-leipzig.de/Result http://gtrnadb.ucsc.edu/download.htmlhttp://gtrnadb.ucsc.edu/download.html And also the readFASTA command from Biostrings, that does basic importing of the data into R. My problem still remains with how to handle the alignment of the tRNA. Since I am not from the field, I might be missing a very basic answer (like where I should download the data from, or what command to use). If you might be willing to advice me, that would be most helpful. Many thanks in advance, Tal

  Read the article

• EC2 instance suddenly refusing SSH connections and won't respond to ping

  - by Chris

  My instance was running fine and this morning I was able to access a Ruby on Rails app hosted on it. An hour later I suddenly wasn't able to access my site, my SSH connection attempts were refused and the server wasn't even responding to ping. I didn't change anything on my system during that hour and reboots aren't fixing it. I've never had any problems connecting or pinging the system before. Can someone please help? This is on my production system! OS: CentOS 5 AMI ID: ami-10b55379 Type: m1.small [] ~% ssh -v *****@meeteor.com OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to meeteor.com [184.73.235.191] port 22. debug1: connect to address 184.73.235.191 port 22: Connection refused ssh: connect to host meeteor.com port 22: Connection refused [] ~% ping meeteor.com PING meeteor.com (184.73.235.191): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 ^C --- meeteor.com ping statistics --- 4 packets transmitted, 0 packets received, 100.0% packet loss [] ~% ========= System Log ========= Restarting system. Linux version 2.6.16-xenU ([email protected]) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Mon May 28 03:41:49 SAST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000006a400000 (usable) 980MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active IRQ lockup detection disabled Built 1 zonelists Kernel command line: root=/dev/sda1 ro 4 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Xen reported: 2599.998 MHz processor. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f53fe000, maxmem 2d7fe000 Memory: 1718700k/1748992k available (1958k kernel code, 20948k reserved, 620k data, 144k init, 1003528k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5202.30 BogoMIPS (lpj=26011526) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Checking 'hlt' instruction... OK. Brought up 1 CPUs migration_cost=0 Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs xen_mem: Initialising balloon driver. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Xen virtual console successfully installed as tty1 Event-channel device installed. netfront: Initialising virtual ethernet driver. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 Registering block device major 8 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI No-Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 144k freed *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls glibc libraries. The emulation is ** ** slow. To ensure full performance you should ** ** install a 'xen-friendly' (nosegneg) version of ** ** the library, or disable tls support by executing ** ** the following as root: ** ** mv /lib/tls /lib/tls.disabled ** ** Offending process: init (pid=1) ** *************************************************************** *************************************************************** Pausing... 5Pausing... 4Pausing... 3Pausing... 2Pausing... 1Continuing... INIT: version 2.86 booting Welcome to CentOS release 5.4 (Final) Press 'I' to enter interactive startup. Setting clock : Fri Oct 1 14:35:26 EDT 2010 [ OK ] Starting udev: [ OK ] Setting hostname localhost.localdomain: [ OK ] No devices found Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 275424/1310720 files, 1161123/2621440 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 4 Entering non-interactive startup Starting background readahead: [ OK ] Applying ip6tables firewall rules: modprobe: FATAL: Module ip6_tables not found. ip6tables-restore v1.3.5: ip6tables-restore: unable to initializetable 'filter' Error occurred at line: 3 Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more information. [FAILED] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_ns [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... done. [ OK ] Starting auditd: [FAILED] Starting irqbalance: [ OK ] Starting portmap: [ OK ] FATAL: Module lockd not found. Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Error: RPC MTAB does not exist. Starting system message bus: [ OK ] Starting Bluetooth services:[ OK ] [ OK ] Can't open RFCOMM control socket: Address family not supported by protocol Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: Can't open HIDP control socket: Address family not supported by protocol [FAILED] Starting autofs: Starting automount: automount: test mount forbidden or incorrect kernel protocol version, kernel protocol version 5.00 or above required. [FAILED] [FAILED] Starting sshd: [ OK ] Starting cups: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: no console device found[FAILED] Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 390 100 390 0 0 58130 0 --:--:-- --:--:-- --:--:-- 58130 100 390 100 390 0 0 56984 0 --:--:-- --:--:-- --:--:-- 0 Starting yum-updatesd: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Starting OSSEC: [ OK ] Starting smartd: [ OK ] c CentOS release 5.4 (Final) Kernel 2.6.16-xenU on an i686 domU-12-31-39-00-C4-97 login: INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes

  Read the article

• Duplicated Java runtime options : what is the order of preference ?

  - by fabien7474

  Considering the following command line java -Xms128m -Xms256m myapp.jar Which settings will apply for JVM Minimum memory (Xms option) : 128m or 256m ?

  Read the article

• Sending message to windows service by web page

  - by Enriquev

  Hello, How could I do this with no access denied problem? I have a windows service: protected override void OnCustomCommand(int command) { if (command == 1) { foreach (Process traceProcess in Process.GetProcessesByName("notepad.exe")) { traceProcess.Kill(); } } } when I do this: ServiceController sc = new ServiceController("ProjectManager"); if (sc != null) sc.ExecuteCommand(1); From a windows forms it works, but not from a web page, I get access denied on sc.ExecuteCommand. What's the best way for a web page to talk to a service?

  Read the article

• Trouble with Powershell and running a complex commandline

  - by Frank Rosario

  Hi, I've been trying to run the following command line from a Powershell build script we have; but keep running into issues & 'C:\Dev\Yadda\trunk\BuildScripts\U tilities\csmanage.exe' /create-deployme nt /name:yadddayaddyaddadev /label:yadddayaddyaddadev /package:https://yadddayaddyadda.blob.core.windows.net/mydeployments/20100426_202848_FamilyMoments.cspk g /config:C:\Dev\WalmartOne\trunk\yadddayaddyadda.CloudService\bin\Debug\ServiceCon figuration.cscfg /slot:Staging /hosted-service:yadddayaddyadda-dev" Note: the space in "Utilities" is intentional; trying to snif out a bug involving spaces in the executable path. I assure you, the path does exist with the space in it on my machine. What's the best way to call this command line from Powershell? I've tried Invoke-Expression, Diagnostic.Process::Start, &; each method coming up with some different type of error; usually that it could find the executable. Any constructive input is greatly appreciated. Thanks.

  Read the article

• How can unrealscript halt event handler execution after an arbitrary number of lines with no return or error?

  - by Dan Cowell

  I have created a class that extends TcpLink and is instantiated in a custom Kismet Sequence Action. It is being instantiated correctly and is making the GET HTTP request that I need it to (I have checked my access log in apache) and Apache is responding to the request with the appropriate content. The problem I have is that I'm using the event receive mode and it appears that somehow the handler for the Opened event is halted after a specific number of lines of code have executed. Here is my code for the Opened event: event Opened() { // A connection was established WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] event opened"); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Sending simple HTTP query"); //The HTTP GET request //char(13) and char(10) are carrage returns and new lines requesttext = "userId="$userId$"&apartmentId="$apartmentId; SendText("GET /"$path$"?"$requesttext$" HTTP/1.0"); SendText(chr(13)$chr(10)); SendText("Host: "$TargetHost); SendText(chr(13)$chr(10)); SendText("Connection: Close"); SendText(chr(13)$chr(10)$chr(13)$chr(10)); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Sent request: "$requesttext); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] end HTTP query"); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] LinkState: "$LinkState); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] LinkMode: "$LinkMode); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] ReceiveMode: "$ReceiveMode); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Error: "$string(GetLastError())); } As you can see, a number of the Broadcast calls have been commented out. Initially, only the lines up to the Broadcast containing "[DNomad_TcpLinkClient] Sent request: " were being executed and none of the Broadcasts were commented out. After commenting out that line, the next Broadcast was successful and so on and so forth. As a test, I commented out the very first Broadcast to see if the connection closing had any effect: // A connection was established //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] event opened"); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Sending simple HTTP query"); Upon doing that, an additional Broadcast at the end of the function executed. Thus the inference that there is an upper limit to the number of lines executed. Additionally, my ReceivedText handler is never called, despite Apache returning the correct HTTP 200 response with a body. My working hypothesis is that somehow after the Sequence Action finishes executing the garbage collector cleans up the TcpLinkClient instance. My biggest source of confusion with that is how on earth it does it during the execution of an event handler. Has anyone ever seen anything like this before? My full TcpLinkClient class is below: /* * TcpLinkClient based on an example usage of the TcpLink class by Michiel 'elmuerte' Hendriks for Epic Games, Inc. * */ class DNomad_TcpLinkClient extends TcpLink; var PlayerController PC; var string TargetHost; var int TargetPort; var string path; var string requesttext; var string userId; var string apartmentId; var string statusCode; var string responseData; event PostBeginPlay() { super.PostBeginPlay(); } function DoTcpLinkRequest(string uid, string id) //removes having to send a host { userId = uid; apartmentId = id; Resolve(targethost); } function string GetStatus() { return statusCode; } event Resolved( IpAddr Addr ) { // The hostname was resolved succefully WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] "$TargetHost$" resolved to "$ IpAddrToString(Addr)); // Make sure the correct remote port is set, resolving doesn't set // the port value of the IpAddr structure Addr.Port = TargetPort; //dont comment out this log because it rungs the function bindport WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Bound to port: "$ BindPort() ); if (!Open(Addr)) { WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Open failed"); } } event ResolveFailed() { WorldInfo.Game.Broadcast(self, "[TcpLinkClient] Unable to resolve "$TargetHost); // You could retry resolving here if you have an alternative // remote host. //send failed message to scaleform UI //JunHud(JunPlayerController(PC).myHUD).JunMovie.CallSetHTML("Failed"); } event Opened() { // A connection was established //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] event opened"); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Sending simple HTTP query"); //The HTTP GET request //char(13) and char(10) are carrage returns and new lines requesttext = "userId="$userId$"&apartmentId="$apartmentId; SendText("GET /"$path$"?"$requesttext$" HTTP/1.0"); SendText(chr(13)$chr(10)); SendText("Host: "$TargetHost); SendText(chr(13)$chr(10)); SendText("Connection: Close"); SendText(chr(13)$chr(10)$chr(13)$chr(10)); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Sent request: "$requesttext); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] end HTTP query"); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] LinkState: "$LinkState); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] LinkMode: "$LinkMode); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] ReceiveMode: "$ReceiveMode); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Error: "$string(GetLastError())); } event Closed() { // In this case the remote client should have automatically closed // the connection, because we requested it in the HTTP request. WorldInfo.Game.Broadcast(self, "Connection closed."); // After the connection was closed we could establish a new // connection using the same TcpLink instance. } event ReceivedText( string Text ) { WorldInfo.Game.Broadcast(self, "Received Text: "$Text); //we dont want the header info, so we split the string after two new lines Text = Split(Text, chr(13)$chr(10)$chr(13)$chr(10), true); WorldInfo.Game.Broadcast(self, "Split Text: "$Text); statusCode = Text; } event ReceivedLine( string Line ) { WorldInfo.Game.Broadcast(self, "Received Line: "$Line); } event ReceivedBinary( int Count, byte B[255] ) { WorldInfo.Game.Broadcast(self, "Received Binary of length: "$Count); } defaultproperties { TargetHost="127.0.0.1" TargetPort=80 //default for HTTP LinkMode=MODE_Text ReceiveMode=RMODE_Event path = "dnomad/datafeed.php" userId = "0"; apartmentId = "0"; statusCode = ""; send = false; }

  Read the article

• hp -ux remote cpio copy

  - by soField

  REMOTE SERVER remsh remoteserverhostname -l remoteusername find /tmp/a1/ | cpio -o > /tmp/paketr.cpio LOCAL SERVER rcp remoteserverhostname:/tmp/paketr.cpio /tmp/aaa cpio -idmv < /tmp/paketr.cpio i'am trying to get and create directory structure from remote server to local server i can do this with following command list but i wonder if i can do this with just one command by running cpio with pass-through mode remsh remoteserverhostname find /tmp/a1 | cpio -pd /tmp current </tmp/tmp/a1/b1/y1> newer current </tmp/tmp/a1/b1/z1> newer current </tmp/tmp/a1/b2/l2smc> newer "/tmp/a1/b3": No such file or directory Cannot stat </tmp/a1/b3>. 0 blocks so when i try to cpio -pd option , i am expecting it to create directories for me but it does not i was using rcp but its not preserving symbolic links :( what can i do ? hp-ux

  Read the article

• Visual Studio - purpose of 'Refresh' button in solution explorer

  - by BhejaFry

  Hi folks, what's the purpose of the 'Refresh' command on the solution explorer window? (When we select a project, the button is enabled) TIA

  Read the article

• Shell Script Sequencing with Rake

  - by Haseeb Khan

  Hi All, I am working on a rake utility and want to implement something mentioned below: There are some shell commands in a sequence in my Rake file. What I want is that the sequence should wait for the previous command to finish processing before it moves to the next one. sh "git commit -m \"#{args.commit_message}\"" do |ok, res| # Do some processing end sh "git push heroku master" So, in the above example what I want is that sh "git push heroku master" shouldn't be executed until the processing in the sh "git commit -m \"#{args.commit_message}\"" do |ok, res| # Do some processing end is completed. Also another nice to have would be that if I can store the output of the shell command in a Ruby variable so it can be used in further manipulation if required. Looking forward to a reply from the fellow community member shortly. Thanks in advance.

  Read the article

• ImageMagick on Mac OSX Snow Leopard. Is there any way to get it to work?

  - by ?????

  It seems that I have more trouble getting standard Unix things to run on Snow Leopard than any other platform--including Windows cygwin For the past couple of days, I've been trying to get ImageMagick to run on Snow Leopard. The most obvious way, Mac Ports, fails: tppllc-Mac-Pro:ImageMagick-sl swirsky$ sudo port install imagemagick ---> Computing dependencies for p5-locale-gettext ---> Configuring p5-locale-gettext Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-locale-gettext/work/gettext-1.05" && /opt/local/bin/perl Makefile.PL INSTALLDIRS=vendor " returned error 2 Command output: checking for gettext... no checking for gettext in -I/opt/local/include -arch i386 -L/opt/local/lib -lintl...gettext function not found. Please install libintl at Makefile.PL line 18. no Error: Unable to upgrade port: 1 Error: Unable to execute port: upgrade xorg-libXt failed Before reporting a bug, first run the command again with the -d flag to get complete output. tppllc-Mac-Pro:ImageMagick-sl swirsky$ Not wanting to spend another two days figuring out why my libintl doesn't have a "gettext" function, I tried a different route: the script mentioned here: http://github.com/masterkain/ImageMagick-sl This script downloads and installs an ImageMagic independently of MacPorts issues tppllc-Mac-Pro:ImageMagick-sl swirsky$ /usr/local/bin/convert dyld: Library not loaded: /opt/local/lib/libiconv.2.dylib Referenced from: /opt/local/lib/libfontconfig.1.dylib Reason: Incompatible library version: libfontconfig.1.dylib requires version 8.0.0 or later, but libiconv.2.dylib provides version 7.0.0 Trace/BPT trap It downloads everything and compiles fine, but fails when I try to run it, with the message above. So now I'm two steps away from ImageMagick, trying to get a newer libiconv on my machine. I downloaded the latest libiconv, compiled and built it. I put the resulting library in /opt/local/lib, and I still get the same error message: tppllc-Mac-Pro:.libs swirsky$ sudo mv libiconv.2.dylib /opt/local/lib/libiconv.2.dylib tppllc-Mac-Pro:.libs swirsky$ convert dyld: Library not loaded: /opt/local/lib/libiconv.2.dylib Referenced from: /opt/local/lib/libfontconfig.1.dylib Reason: Incompatible library version: libfontconfig.1.dylib requires version 8.0.0 or later, but libiconv.2.dylib provides version 7.0.0 Trace/BPT trap So here's my question: Is it possible to get ImageMagick to run on OSX Snow Leopard? Are there any binary distributions that have static libraries baked in so I don't have to worry about these issue/

  Read the article

• Bluetooth connection. Problem with sony ericsson.

  - by Hugi

  I have bt client and server. Then i use method Connector.open, client connects to the port, but passed so that my server does not see them. Nokia for all normal, but with sony ericsson i have this problem. On bt adapter open one port (com 5). Listings Client /* * To change this template, choose Tools | Templates * and open the template in the editor. */ import java.util.Vector; import javax.bluetooth.*; import javax.microedition.midlet.*; import javax.microedition.lcdui.*; import javax.microedition.io.*; import java.io.*; /** * @author ????????????? */ public class Client extends MIDlet implements DiscoveryListener, CommandListener { private static Object lock=new Object(); private static Vector vecDevices=new Vector(); private ServiceRecord[] servRec = new ServiceRecord[INQUIRY_COMPLETED]; private Form form = new Form( "Search" ); private List voteList = new List( "Vote list", List.IMPLICIT ); private List vote = new List( "", List.EXCLUSIVE ); private RemoteDevice remoteDevice; private String connectionURL = null; protected int stopToken = 255; private Command select = null; public void startApp() { //view form Display.getDisplay(this).setCurrent(form); try { //device search print("Starting device inquiry..."); getAgent().startInquiry(DiscoveryAgent.GIAC, this); try { synchronized(lock){ lock.wait(); } }catch (InterruptedException e) { e.printStackTrace(); } //device count int deviceCount=vecDevices.size(); if(deviceCount <= 0) { print("No Devices Found ."); } else{ remoteDevice=(RemoteDevice)vecDevices.elementAt(0); print( "Server found" ); //create uuid UUID uuid = new UUID(0x1101); UUID uuids[] = new UUID[] { uuid }; //search service print( "Searching for service..." ); getAgent().searchServices(null,uuids,remoteDevice,this); } } catch( Exception e) { e.printStackTrace(); } } //if deivce discovered add to vecDevices public void deviceDiscovered(RemoteDevice btDevice, DeviceClass cod) { //add the device to the vector try { if(!vecDevices.contains(btDevice) && btDevice.getFriendlyName(true).equals("serverHugi")){ vecDevices.addElement(btDevice); } } catch( IOException e ) { } } public synchronized void servicesDiscovered(int transID, ServiceRecord[] servRecord) { //for each service create connection if( servRecord!=null && servRecord.length>0 ){ print( "Service found" ); connectionURL = servRecord[0].getConnectionURL(ServiceRecord.NOAUTHENTICATE_NOENCRYPT,false); //connectionURL = servRecord[0].getConnectionURL(ServiceRecord.AUTHENTICATE_NOENCRYPT,false); } if ( connectionURL != null ) { showVoteList(); } } public void serviceSearchCompleted(int transID, int respCode) { //print( "serviceSearchCompleted" ); synchronized(lock){ lock.notify(); } } //This callback method will be called when the device discovery is completed. public void inquiryCompleted(int discType) { synchronized(lock){ lock.notify(); } switch (discType) { case DiscoveryListener.INQUIRY_COMPLETED : print("INQUIRY_COMPLETED"); break; case DiscoveryListener.INQUIRY_TERMINATED : print("INQUIRY_TERMINATED"); break; case DiscoveryListener.INQUIRY_ERROR : print("INQUIRY_ERROR"); break; default : print("Unknown Response Code"); break; } } //add message at form public void print( String msg ) { form.append( msg ); form.append( "\n\n" ); } public void pauseApp() { } public void destroyApp(boolean unconditional) { } //get agent :))) private DiscoveryAgent getAgent() { try { return LocalDevice.getLocalDevice().getDiscoveryAgent(); } catch (BluetoothStateException e) { throw new Error(e.getMessage()); } } private synchronized String getMessage( final String send ) { StreamConnection stream = null; DataInputStream in = null; DataOutputStream out = null; String r = null; try { //open connection stream = (StreamConnection) Connector.open(connectionURL); in = stream.openDataInputStream(); out = stream.openDataOutputStream(); out.writeUTF( send ); out.flush(); r = in.readUTF(); print( r ); in.close(); out.close(); stream.close(); return r; } catch (IOException e) { } finally { if (stream != null) { try { stream.close(); } catch (IOException e) { } } return r; } } private synchronized void showVoteList() { String votes = getMessage( "c_getVotes" ); voteList.append( votes, null ); select = new Command( "Select", Command.OK, 4 ); voteList.addCommand( select ); voteList.setCommandListener( this ); Display.getDisplay(this).setCurrent(voteList); } private synchronized void showVote( int index ) { String title = getMessage( "c_getVote_"+index ); vote.setTitle( title ); vote.append( "Yes", null ); vote.append( "No", null ); vote.setCommandListener( this ); Display.getDisplay(this).setCurrent(vote); } public void commandAction( Command c, Displayable d ) { if ( c == select && d == voteList ) { int index = voteList.getSelectedIndex(); print( ""+index ); showVote( index ); } } } Use BlueCove in this program. Server /* * To change this template, choose Tools | Templates * and open the template in the editor. */ package javaapplication4; import java.io.*; import java.util.concurrent.locks.Lock; import java.util.concurrent.locks.ReentrantLock; import javax.bluetooth.*; import javax.microedition.io.*; import javaapplication4.Connect; /** * * @author ????????????? */ public class SampleSPPServer { protected static int endToken = 255; private static Lock lock=new ReentrantLock(); private static StreamConnection conn = null; private static StreamConnectionNotifier streamConnNotifier = null; private void startServer() throws IOException{ //Create a UUID for SPP UUID uuid = new UUID("1101", true); //Create the service url String connectionString = "btspp://localhost:" + uuid +";name=Sample SPP Server"; //open server url StreamConnectionNotifier streamConnNotifier = (StreamConnectionNotifier)Connector.open( connectionString ); while ( true ) { Connect ct = new Connect( streamConnNotifier.acceptAndOpen() ); ct.getMessage(); } } /** * @param args the command line arguments */ public static void main(String[] args) { //display local device address and name try { LocalDevice localDevice = LocalDevice.getLocalDevice(); localDevice.setDiscoverable(DiscoveryAgent.GIAC); System.out.println("Name: "+localDevice.getFriendlyName()); } catch( Throwable e ) { e.printStackTrace(); } SampleSPPServer sampleSPPServer=new SampleSPPServer(); try { //start server sampleSPPServer.startServer(); } catch( IOException e ) { e.printStackTrace(); } } } Connect /* * To change this template, choose Tools | Templates * and open the template in the editor. */ package javaapplication4; import java.io.*; import java.util.concurrent.locks.Lock; import java.util.concurrent.locks.ReentrantLock; import javax.bluetooth.*; import javax.microedition.io.*; /** * * @author ????????????? */ public class Connect { private static DataInputStream in = null; private static DataOutputStream out = null; private static StreamConnection connection = null; private static Lock lock=new ReentrantLock(); public Connect( StreamConnection conn ) { connection = conn; } public synchronized void getMessage( ) { Thread t = new Thread() { public void run() { try { in = connection.openDataInputStream(); out = connection.openDataOutputStream(); String r = in.readUTF(); System.out.println("read:" + r); if ( r.equals( "c_getVotes" ) ) { out.writeUTF( "vote1" ); out.flush(); } if ( r.equals( "c_getVote_0" ) ) { out.writeUTF( "Vote1" ); out.flush(); } out.close(); in.close(); } catch (Throwable e) { } finally { if (in != null) { try { in.close(); } catch (IOException e) { } } try { connection.close(); } catch( IOException e ) { } } } }; t.start(); } }

  Read the article

• Eclipse and python: library will import in interprer, but not in IDE

  - by John

  I'm running Windows 7, Python 2.6.4 and the latest version of Eclipse. I downloaded the boto library (http://code.google.com/p/boto/) and ran python setup.py install, which created boto-1.9b-py2.6.egg in C:\Python26\Lib\site-packages. Importing a class - say, by doing 'from boto.sqs.connection import SQSConnection' - works fine from the python command line tool. But Eclipse will not find boto, despite the fact that it is using the same python interpreter as I am using when at the command line. I added the library as an external source folder, but that didn't work either. How can I properly import the boto library into Eclipse? Thanks.

  Read the article

• A simple Python deployment problem - a whole world of pain

  - by Evgeny

  We have several Python 2.6 applications running on Linux. Some of them are Pylons web applications, others are simply long-running processes that we run from the command line using nohup. We're also using virtualenv, both in development and in production. What is the best way to deploy these applications to a production server? In development we simply get the source tree into any directory, set up a virtualenv and run - easy enough. We could do the same in production and perhaps that really is the most practical solution, but it just feels a bit wrong to run svn update in production. We've also tried fab, but it just never works first time. For every application something else goes wrong. It strikes me that the whole process is just too hard, given that what we're trying to achieve is fundamentally very simple. Here's what we want from a deployment process. We should be able to run one simple command to deploy an updated version of an application. (If the initial deployment involves a bit of extra complexity that's fine.) When we run this command it should copy certain files, either out of a Subversion repository or out of a local working copy, to a specified "environment" on the server, which probably means a different virtualenv. We have both staging and production version of the applications on the same server, so they need to somehow be kept separate. If it installs into site-packages, that's fine too, as long as it works. We have some configuration files on the server that should be preserved (ie. not overwritten or deleted by the deployment process). Some of these applications import modules from other applications, so they need to be able to reference each other as packages somehow. This is the part we've had the most trouble with! I don't care whether it works via relative imports, site-packages or whatever, as long as it works reliably in both development and production. Ideally the deployment process should automatically install external packages that our applications depend on (eg. psycopg2). That's really it! How hard can it be?

  Read the article

• remote cpio copy

  - by soField

  remsh remoteserverhostname -l remoteusername find /tmp/a1/ | cpio -o > /tmp/paketr.cpio rcp remoteserverhostname:/tmp/paketr.cpio /tmp/aaa cpio -idmv < /tmp/paketr.cpio i'am trying to get and create directory structure from remote server to local server i can do this with following command list but i wonder if i can do this with just one command by running cpio with pass-through mode remsh remoteserverhostname find /tmp/a1 | cpio -pd /tmp current </tmp/tmp/a1/b1/y1> newer current </tmp/tmp/a1/b1/z1> newer current </tmp/tmp/a1/b2/l2smc> newer "/tmp/a1/b3": No such file or directory Cannot stat </tmp/a1/b3>. 0 blocks so when i try to cpio -pd option , i am expecting it to create directories for me but it does not what can i do ?

  Read the article

• Suggestions for debugging print stylesheets?

  - by Jim Puls

  I've recently been working on a print stylesheet for a website, and I realized that I was at a loss for effective ways to tweak it. It's one thing to have a reload cycle for working on the on-screen layout: change code command-tab reload but that whole process gets much more arduous when you're trying to print: change code command-tab reload print squint at print-preview image open PDF in Preview for further inspection Are there tools I'm missing out on here? Does WebKit's inspector have a "pretend this is paged media" checkbox? Is there some magic that Firebug (shudder) can do?

  Read the article

• How to send a signal SIGINT from script to script ? BASH

  - by debugger

  I want to trap a signal send from Script-A.sh to Script-B.sh so in Script-A.sh i use the command (Send SIGINT to Script-B.sh) kill -2 $PID_Script-B.sh And in Script-B.sh i catch the signal and call function Clean trap 'Clean' 2 It does not work, instead the Script-B.sh is killed right away without performing the Clean !! What i notice also is that if i want to send SIGINT from terminal to any script that traps it, a ctrl-c will be catched correctly, but not if i specify the signal via the command kill -2 $pid_of_script Any idea about the difference between the two method to send the SIGINT (ctrl-c VS kill -2 $pid_of_script), and how i can send a SIGINT from a script to another ? Regards, Debugger

  Read the article

• Error in unzipping a file from a python script running as daemon

  - by Fedrick

  I am getting an error whenever i try to run following unzip command from a python script which is running as a daemon Command : unzip abcd.zip /dev/null Error End-of-central-directory signature not found$ a zip file, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive unzip: cannot find zipfile directory in one of abcd.zip$ abcd.zip.zip, and cannot find abcd.zip.ZIP, period. Could anyone help me in this regard? Thanks in advance.

  Read the article

• how to calculate a bill from several tables on mysql?

  - by Audel

  I'm using mysql to create an hotel booking system, but i am struggling a little bit to calculate the final bill. I need a SELECT command to get data from several tables and make some calculations. Basically I just need to get the 'night cost' from a table called 'room_types'. Then, use DATEDIFF function to get the difference of days between the 'checkin' and 'checkout' columns in the table 'room_booking' and multiply the difference with the night cost and display the total. These are the tables I would be using: are room_booking, room_types, booking, and room. One booking may have several room bookings, so Im looking for a table that looks something like this: +------------+------------+---------------+------------------+ | bookingid | Room price | nights stayed | total room price | +------------+------------+---------------+------------------+ | B001 | 30.00 | 4 | 120.00 | +------------+------------+---------------+------------------+ | B001 | 40.00 | 3 | 120.00 | +------------+------------+---------------+------------------+ booking id comes from table 'booking' room price from 'room_types', 'nights stayed' is calculated from the table room_booking, using the datediff command between checkin and checkout . I hope i was clear

  Read the article

• Calling function from popover.

  - by user288225

  Alright, so I made a popover from my main view and all that good stuff. But I want to have my popover call an action in my main view when a button within the popover is pressed. MainView *mainView = [[MainView alloc] initWithNibName:@"MainView" bundle:nil]; [mainView doStuff]; The "dostuff" function changes some elements within the view. For example, the color of the toolbar is supposed to be changed. I've put a print command and the print command executes. But for some reason, the toolbar won't change color. I've imported the header of MainView into the popover. I did an @class thingy for MainView in my popover. doStuff is declared in MainView's header. The IBOutlets are declared too, and connected. Any ideas?

  Read the article

• Generating a reasonable ctags database for Boost

  - by Robert S. Barnes

  I'm running Ubuntu 8.04 and I ran the command: $ ctags -R --c++-kinds=+p --fields=+iaS --extra=+q -f ~/.vim/tags/stdlibcpp /usr/include/c++/4.2.4/ to generate a ctags database for the standard C++ library and STL ( libstdc++ ) on my system for use with the OmniCppComplete vim script. This gave me a very reasonable 4MB tags file which seems to work fairly well. However, when I ran the same command against the installed Boost headers: $ ctags -R --c++-kinds=+p --fields=+iaS --extra=+q -f ~/.vim/tags/boost /usr/include/boost/ I ended up with a 1.4 GB tags file! I haven't tried it yet, but that seems likes it's going to be too large to be useful. Is there a way to get a slimmer, more usable tags file for my installed Boost headers? Edit Just as a note, libstdc++ includes TR1, which has allot of Boost libs in it. So there must be something weird going on for libstdc++ to come out with a 4 MB tags file and Boost to end up with a 1.4 GB tags file.

  Read the article

• How to add a timeout value when using Java's Runtime.exec()?

  - by James Adams

  I have a method I am using to execute a command on the local host. I'd like to add a timeout parameter to the method so that if the command being called doesn't finish in a reasonable amount of time the method will return with an error code. Here's what it looks like so far, without the ability to timeout: public static int executeCommandLine(final String commandLine, final boolean printOutput, final boolean printError) throws IOException, InterruptedException { Runtime runtime = Runtime.getRuntime(); Process process = runtime.exec(commandLine); if (printOutput) { BufferedReader outputReader = new BufferedReader(new InputStreamReader(process.getInputStream())); System.out.println("Output: " + outputReader.readLine()); } if (printError) { BufferedReader errorReader = new BufferedReader(new InputStreamReader(process.getErrorStream())); System.out.println("Error: " + errorReader.readLine()); } return process.waitFor(); } Can anyone suggest a good way for me to implement a timeout parameter? Thanks in advance for any suggestions! --James

  Read the article

• Problems with VBScript - RegRead when running as a service

  - by Brandon

  I am working on a script that runs under a custom installation utility, which is running as a service. To get the current user name the script executes this command: str_Acct_Name_Val = "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Logon User Name" str_Acct_Name = RegRead(str_Acct_Name_Val) When I run the script from the command prompt, it can read that value just fine (under an administrator account). When the value is attempted to be read with service/local system privileges, the read fails. What is the problem here? EDIT: Some additional information. When running as a service calling the current user name returns "SYSTEM" and my guess is that HKCU doesn't "exist" under the view of the SYSTEM, since there is technically no current user. There is a user logged in at the time, but not in the scope of the running script. Maybe there is somewhere in HKLM I could find the currently logged on user?

  Read the article

• Android "gen" folder and SVN - bitter enemies.

  - by Benju

  It seems that I accidentally checked in my "gen" folder from an Android project (this folder contains the R.java generated class). When I realized I did this I deleted it from SVN and tried to ignore it. Now I am now getting the error... "Could not add gen to the ignore list! Working copy 'C:\code\guru' locked. When I try to run a cleanup command I get this... Cleanup failed to process the following paths: -C:\code\guru 'C:\code\guru\gen' is not a working copy directory. When I try to run a resolve I get this... Working copy 'C:\code\guru' locked Please execute the 'Cleanup' command. We are currently on SVN 1.6 on the server.

  Read the article

• Indy10 Deadlock at TCPServer

  - by user1769184

  to write information on the processing state to the GUI inside a tcpserver.onexecute(..) function , i used the following command sequence ExecuteDUMMYCommand(Global_Send_Record); BitMap_PaintImageProcess; TThread.Synchronize(nil, BitMap_PaintImageProcess); The code is working well on some machines, but on a few it fails. The code execution stops atTThread.Synchronize command. I guess on these machines the function call is trapped inside a deadlock Any chance to figure out the real problem behind ? The procedure BitMap_PaintImageProcess , here I create a Bitmap and do a lot of painting stuff , but is seems that this code is never executed ?

  Read the article

< Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >