Search Results

Search found 17063 results on 683 pages for 'window restore'.

Page 476/683 | < Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >

  • bridge to share WiFi internet connection over eth0

    - by rubo77
    In this script there is implemented that you create a mesh network and connect other machines to your device to serve an internet connection with dhcp: echo "starting bridge to share internet connection over eth0" ifconfig eth0 up promisc brctl addbr br-freifunk brctl addif br-freifunk bat0 brctl addif br-freifunk eth0 echo "internet starting, this may take some minutes due to latency..." echo "(use" echo "tail -f /var/log/syslog" echo "in another window for debugging)" echo echo dhclient br-freifunk echo "The error 'Rather than invoking init scripts through /etc/init.d...' can be ignored:" dhclient br-freifunk # without bridge: dhclient bat0 This works fine with the freifunk-mesh network. But how can I serve internet in a normal case? I would like to connect to any open Wifi I find with my network-manager or wicd (yes, with the graphical GUI) and then start a small script that creates a bridge to my network-out on my laptop I use Ubuntu and my networkcards are eth0 and wlan0

    Read the article

  • How to disable an "always there" program if it isn't in the processes list?

    - by rumtscho
    I have Crashplan and it is constantly running in the background and making backups every 15 minutes. It caused some problems with the backup target folders, so I want it to be inactive while I am making changes to these folders. I started the application itself, but could not find some kind of "Pause" button. So I decided to just stop its process. I first tried the lazy way - the system monitor in the Gnome panel has a "Processes" tab - but didn't find it listed there. Then I did a sudo ps -A and read through the whole list. I don't recognize everything on the list (many process names are self-explaining, like evolution-alarm, but I don't recognize others like phy0) but there was nothing which sounded even remotely like crashplan. But I know that there must have been a process belonging to Crashplan running at this time, because the main Crashplan window was open when I ran the command. Do you have any advice how to stop this thing from running? The best solution would involve temporary preventing it from loading on boot too, since I may need to reboot while doing the maintenance there.

    Read the article

  • NetBeans has broken interface with OpenJDK

    - by Krzysztof Stanislawek
    Sorry for English. Usually (say, at 4/5 of times), when I start NetBeans, interface is partially broken. For example, menu items are appearing and at once disappearing after click; some parts of editor are also blocked for cursor actions. Another issue is broken Options window - I can show it only once for NetBeans execution. There are more similar issues. $ java -version java version "1.7.0_55" OpenJDK Runtime Environment (IcedTea 2.4.7) (7u55-2.4.7-1ubuntu1~0.13.10.1) OpenJDK 64-Bit Server VM (build 24.51-b03, mixed mode) Version of NetBeans is 7.0.1. Linux version is Mint 16. I use Mate. I had the same issue at other computer, at the same operating system. I know that installing Sun version of Java could help, but I also know that there shouldn't be such issue with OpenJDK. Also, I had other problem with NetBeans and Sun Java 8 - NetBeans suddenly crashed before he fully started, so I want to stick with OpenJDK. What causes my problem? Should I use other version of NetBeans/OpenJDK?

    Read the article

  • what does it mean for MalwareBytes to find malicious registry keys but nothing else?

    - by EndangeringSpecies
    I have a machine that is obviously infected, and when I ran MalwareBytes it told me that it found some "malicious" registry keys (surprisingly enough these contained file path to currently non-existent javascript files). But, that's it. Full scan did not uncover any malicious files, or malicious hidden processes in memory. Like, maybe the (hidden?) process that for whatever reason periodically injects keystrokes (hotkeys?) into whatever currently open window. Then on another, not obviously infected, machine it found a "malware.trace" registry key but again no files or processes etc. How does this jive with people's experience with MalwareBytes? Does it usually find registry key symptoms of an infection but nothing else? Or is it a common thing to have no infection but some malicious registry keys in place anyway?

    Read the article

  • Error message when renaming files on a network drive stored in Windows 7 favorites

    - by paulmorriss
    I have a network drive mapped to a share on a Window Server 2003. I have a shortcut to this drive stored in my Windows 7 favorites. When I double click the shortcut and then rename a file on the drive, if the file is longer than 8 chars or contains spaces then I get this error The drive that this file or folder is stored on does not allow long file names, or names containing blanks or any of the following characters:... If I get to the network drive by click on it in the tree under computer then it works fine. Is there a way to get round this?

    Read the article

  • "unresolvable problem" error when upgrading from 12.04 to 14.04

    - by flyingfisch
    So I have solved this issue, but now I have another problem: An unresolvable problem occurred while calculating the upgrade. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug using the command 'ubuntu-bug ubuntu-release-upgrader-core' in a terminal. I am not upgrading to a pre-release version of Ubuntu and I am not running a pre-release either. I have unchecked all my 3rd-party packages using Ubuntu Software Manager, EditSoftware Sources... What else might be wrong? UPDATE After doing sudo update-manager -d and sudo apt-get update;sudo apt-get dist-upgrade as per JimB's post, and then running sudo do-release-upgrade, here what I get: Err http://extras.ubuntu.com trusty/main Translation-en Err http://extras.ubuntu.com trusty/main Translation-en_US Err http://extras.ubuntu.com trusty/main Translation-en Ign http://extras.ubuntu.com trusty/main Translation-en_US Ign http://extras.ubuntu.com trusty/main Translation-en Fetched 0 B in 0s (0 B/s) Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Calculating the changes Calculating the changes Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug using the command 'ubuntu-bug ubuntu-release-upgrader-core' in a terminal. Restoring original system state Aborting Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done === Command detached from window (Mon Aug 18 23:53:10 2014) === === Command terminated with exit status 1 (Mon Aug 18 23:53:10 2014) ===

    Read the article

  • Is there an equivalent of SU for Windows

    - by CodeSlave
    Is there a way (when logged in as an administrator, or as a member of the administrators group) to masquerade as a non-privileged user? Especially in an AD environment. e.g., in the Unix world I could do the following (as root): # whoami root # su johnsmith johnsmith> whoami johnsmith johnsmith> exit # exit I need to test/configure something on a user's account, and I don't want to have to know their password or have to reset it. Edit: runas won't cut it. Ideally, my whole desktop would become the user's, etc. and not just in a cmd window.

    Read the article

  • wait after call command minecraft

    - by smeagogol
    I'm trying to create a batch file for a friend because he has some problems on minecraft. He needs to launch minecraft 80 times without closing java error... I have 2 batches, one with a while, and an other one executing java command for launching minecraft. ::Launcher.bat title Script Minecraft set tour=10 set tour2=tour :boucle set /a tour=tour-1 call "D:\thepath\Minecraft2.bat" if %tour%==0 goto suite goto boucle :suite wait javaw.exe :boucle2 set /a tour2=tour2-1 taskkill /F /IM "javaw.exe" if %tour2%==0 goto fin goto boucle2 :fin echo Appuyez sur une touche pour quitter... pause >nul and the other one ::Minecraft2.bat @echo off java -Xmx2048m -Xms1024m -cp "D:\thepath\Minecraft.exe" net.minecraft.LauncherFrame My problem is that when it calls the second batch, it's waiting for closure of the window but we must leave them opened ! If someone has already encountered this problem, I'd be grateful. Thanks PS: If my english is bad, it's because I'm french ;)

    Read the article

  • Problem graphics with ATI Radeon x1270 (RS690M) on Ubuntu 12.04

    - by Giuseppe Della Corte
    I'm Italian and so I apologize for my English! I'm a beginner to Ubuntu and I tried it on my desktop PC and it's fantastic, fast and fun! I decided to try it on my netbook Packard Bell DOT M/A and this is the configuration: AMD Athlon L110 1.2GHz 2GB of RAM ATI Radeon x1270 (RS690M) 150GB Hard Disk I installed Ubuntu 12.04 with Wubi (dualboot Windows 7 + Ubuntu 12.04), because the netbook does not have a DVD player! During the installation everything is OK, after it was installed I see mistakes in the graphical display! I see objects that are seen in different colors and moving (buttons, mouse pointer, text bar ... etc ...) At one point came not to see anything, such as this screenshot: The drivers are open, that is already installed in Ubuntu. Windows 7 video card runs fine, can run well Aero (transparent window effects), I can watch movies in HD and play some games with the Catalyst drivers from AMD. Now I ask a favor, you can help me solve this problem? Is there a fix for this driver or drivers different on the Internet? Thanks for your attention, good bye!

    Read the article

  • Using rsync with link-dest from HFS to NTFS

    - by Tom
    Hi, I'm having a problem with rsync. I'm on a Mac and I'd like to sync my everyday's changes from my HFS+ partition to my NTFS formated networked drive. Pretty simple, and everything goes well except that it syncs every file each times. Here's my script: #! /bin/sh snapshot_dir=/Volumes/USB_Storage/Backups snapshot_id=`date +%Y%m%d%H%M` /usr/bin/rsync -a \ --verbose \ --delete --delete-excluded \ --human-readable --progress \ --one-file-system \ --partial \ --modify-window=1 \ --exclude-from=.backup_excludes \ --link-dest ../current \ /Users/tommybergeron/Desktop/Brainpad \ $snapshot_dir/in-progress cd $snapshot_dir rm -rf $snapshot_id mv in-progress $snapshot_id rm -f current ln -s $snapshot_id $snapshot_dir/current Could someone help me out please? I've been searching for like two hours and I still am clueless. Thanks so much.

    Read the article

  • Windows 7 unresponsive after hibernate.

    - by Simon Verbeke
    The last few days, when I get Windows out of hibernate, Windows itself gets unresponsive. I can use any of my programs that were already opened before hibernating, but the window functions (closing, changing the size etc) aren't reacting. I can't open any new programs, except for the Task Manager. Also, I don't get an Internet connection. When I use Ctrl + Alt + Del, I get either a black screen, or the regular background. Then it hangs and after a while shows me a message that Windows failed starting up that "thing"(don't know what it's called in English, something with safety, etc). I have Windows 7 Ultimate installed.

    Read the article

  • Unable to install Android for Windows 7 because JDK is not found

    - by user1294663
    I have JDK SE7u4 installed in windows 7. I tried to install Android on Windows 7 using the installer_r18-windows.exe but no avail. The setup window showed the message saying that the Java SE JDK not found and ERROR: Failed to find Java version for C:\Windows\System32\java.exe The system cannot found the file specified. If you believe you have a JDK installed and it was not properly recognized, simply set an environment variable JAVA_HOME to point to it I right clicked on Computer Properties Advanced System Settings Environment variables. I created a NEW system variable called JAVA_HOME and set the value as C:\Program Files\Java\jdk1.7.0_04\bin or C:\Windows\System32\java.exe. I ran the installer again — the same error message still appeared.

    Read the article

  • VMware Kernel Module Updater hangs on Ubuntu 13.04

    VMware Player has a nice auto-detection of kernel changes, and requests the user to compile the required modules in order to load them. This happens from time to time after a regular update of your system. Usually, the dialog of VMware Kernel Module Updater pops up, asks for root access authentication, and completes the compilation. VMware Player or Workstation checks if modules for the active kernel are available. In theory this is supposed to work flawlessly but in reality there are pitfalls occassionally. With the recent upgrade to Ubuntu 13.04 Raring Ringtail and the latest kernel 3.8.0-21 the actual VMware Kernel Module Updater simply disappeared and the application wouldn't start as expected. When you launch VMware Player as super user (root) the dialog would stall like so: VMware Kernel Module Updater stalls while stopping the services Prior to version 5.x of VMware Player or version 7.x of VMware Workstation you would run a command like: $ sudo vmware-config.pl to resolve the module version conflict but this doesn't work anyway. Solution Instead, you have to execute the following line in a terminal or console window: $ sudo vmware-modconfig --console --install-all Those switches are (as of writing this article) not documented in the output of the --help switch. But VMware already documented this procedure in their knowledge base: VMware Workstation stops functioning after updating the kernel on a Linux host (1002411). Update As of today I had the first kernel upgrade to version 3.8.0-22 in Ubuntu 13.04. Don't even try it without vmware-modconfig...

    Read the article

  • Password for iis after installing

    - by zapping
    After installing IIS on my dev system, window xp professional, its asking for username and password while trying to access http://localhost. Can you please help me out. Tried googling and tried may things but could not resolve the issue. Anonymous access is enabled iusr_ is given full access to the wwwroot folder asp.net2.0 has been registered etc. But still not working. :( EDIT: Now the password issue has gone off and shows this: Error Type: Microsoft VBScript runtime (0x800A0046) Permission denied: 'GetObject' /localstart.asp, line 40 Browser Type: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Page: GET /localstart.asp

    Read the article

  • Ubuntuone promting that my account is full, but its not....

    - by Andreas
    My Ubuntuone is prompting that my account is full. It has done that for over a week now, but its the account is not full at all... I have tried this guide: 1 down vote Can you please try the following: Quit the Ubuntu One Preferences, if open Open (Lucid): Applications-Accessories-Passwords and Encryption Keys (Maverick): System - Preferences - Password and Encryption Keys Click on the arrow next to "Passwords" Right-click on the Ubuntu One token and select "Delete" Go to https://one.ubuntu.com/account/machines/ Click on the checkbox next to your computer Click the "Remove selected computers" button (Maverick): killall ubuntu-sso-login; u1sdtool -q; u1sdtool -c (Lucid): u1sdtool -q; killall ubuntuone-login; u1sdtool -c a web page, if in Lucid, or a window, in Maverick, should open,prompting you to add your computer to your Ubuntu One account Add your computer This guide did not change any thing and i still get prompted that my account is full every time something is syncing. I also tried to create and connect to a new account butt still... the new account was doing the same. So I am now relay confused, pleas help!

    Read the article

  • Programs keep waiting for external disk to spin up - how to ignore disk?

    - by Andrew J. Brehm
    Like many Mac users I have an external Firewire disk hooked up to my Mac to be used by Time Machine. This works very well, backup-wise. The problem is that very often when I use a Mac application and try to open a file, the file selection dialogue window hangs until the external disk has spun up. I never ever want to open a file on the external disk. Sometimes this happens even when I just want to save a file I already saved (i.e. type something and press meta-s). Is there anything I can do about this?

    Read the article

  • Unable to mount USBDRIVE Error creating moint point: Permission denied

    - by steve
    Whenever I plug a usb into my computer a window pops up and says Unable to mount [Name of USB] Error creating moint point: Permission denied steve@goliath:/$ uname -a Linux goliath 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux steve@goliath:/$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f716ee1 Device Boot Start End Blocks Id System /dev/sda1 1 234441647 117220823+ ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f710ee1 Device Boot Start End Blocks Id System /dev/sdb1 1 2930277167 1465138583+ ee GPT Disk /dev/sdc: 16.0 GB, 16005464064 bytes 74 heads, 10 sectors/track, 42244 cylinders, total 31260672 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 31260671 15626304 c W95 FAT32 (LBA) steve@goliath:/$ sudo mkdir /media/external mkdir: cannot create directory `/media/external': Permission denied steve@goliath:/$ sudo mkdir /media/usb0 mkdir: cannot create directory `/media/usb0': Permission denied steve@goliath:/$ sudo ls -l / | grep media drwxr-xr-x 3 root root 4096 Oct 3 22:48 media steve@goliath:/$ ls /media/ -a . .. MediaShare MediaShare is the the directory on my server that has all my movies and music. If there is any information I left out please let me know.

    Read the article

  • CodePlex Daily Summary for Sunday, September 09, 2012

    CodePlex Daily Summary for Sunday, September 09, 2012Popular ReleasesMishra Reader: Mishra Reader Beta 4: Additional bug fixes and logging in this release to try to find the reason some users aren't able to see the main window pop up. Also, a few UI tweaks to tighten up the feed item list. This release requires the final version of .NET 4.5. If the ClickOnce installer doesn't work for you, please try the additional setup exe.Xenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.9.0: Release Notes Imporved framework architecture Improved the framework security More import/export formats and operations New WebPortal application which includes forum, new, blog, catalog, etc. UIs Improved WebAdmin app. Reports, navigation and search Perfomance optimization Improve Xenta.Catalog domain More plugin interfaces and plugin implementations Refactoring Windows Azure support and much more... Package Guide Source Code - package contains the source code Binaries...Json.NET: Json.NET 4.5 Release 9: New feature - Added JsonValueConverter Fix - Fixed DefaultValueHandling.Ignore not igoring default values of non-nullable properties Fix - Fixed DefaultValueHandling.Populate error with non-nullable properties Fix - Fixed error when writing JSON for a JProperty with no value Fix - Fixed error when calling ToList on empty JObjects and JArrays Fix - Fixed losing decimal precision when writing decimal JValuesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.66: Just going to bite the bullet and rip off the band-aid... SEMI-BREAKING CHANGE! Well, it's a BREAKING change to those who already adjusted their projects to use the previous breaking change's ill-conceived renamed DLLs (versions 4.61-4.65). For those who had not adapted and were still stuck in this-doesn't-work-please-fix-me mode, this is more like a fixing change. The previous breaking change just broke too many people, I'm sorry to say. Renaming the DLL from AjaxMin.dll to AjaxMinLibrary.dl...DotNetNuke® Community Edition CMS: 07.00.00 CTP (Not for Production Use): NOTE: New Minimum Requirementshttp://www.dotnetnuke.com/Portals/25/Blog/Files/1/3418/Windows-Live-Writer-1426fd8a58ef_902C-MinimumVersionSupport_2.png Simplified InstallerThe first thing you will notice is that the installer has been updated. Not only have we updated the look and feel, but we also simplified the overall install process. You shouldn’t have to click through a series of screens in order to just get your website running. With the 7.0 installer we have taken an approach that a...BIDS Helper: BIDS Helper 1.6.1: In addition to fixing a number of bugs that beta testers reported, this release includes the following new features for Tabular models in SQL 2012: New Features: Tabular Display Folders Tabular Translations Editor Tabular Sync Descriptions Fixed Issues: Biml issues 32849 fixing bug in Tabular Actions Editor Form where you type in an invalid action name which is a reserved word like CON or which is a duplicate name to another action 32695 - fixing bug in SSAS Sync Descriptions whe...Umbraco CMS: Umbraco 4.9.0: Whats newThe media section has been overhauled to support HTML5 uploads, just drag and drop files in, even multiple files are supported on any HTML5 capable browser. The folder content overview is also much improved allowing you to filter it and perform common actions on your media items. The Rich Text Editor’s “Media” button now uses an embedder based on the open oEmbed standard (if you’re upgrading, enable the media button in the Rich Text Editor datatype settings and set TidyEditorConten...menu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)Lightweight Fluent Workflow: objectflow 1.4.0.1: Changes in this release;Exception handling policies Install on NuGet console; Install-Package objectflow.core -pre Supported work-flow patterns Exception policies Sequence Parallel split Simple merge Exclusive choice Retry Arbitrary cycles Framework Features Handle exceptions with workflow.Configure().On<Exception>() Repeat operations and functions an arbitrary number of times Retry failed lamda functions Generic interface for concise workflow registration Operations t...Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...LibXmlSocket: Binary: .net4.5,.netCore???????Hidden Capture (HC): Hidden Capture 1.1: Hidden Capture 1.1 by Mohsen E.Dawatgar http://Hidden-Capture.blogfa.comThe Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine (0.2.0): ????ISE?0.1.0??,?????,ISE?0.2.0?????????,???????,????????20???follow?ISE,????,??ISE??????????,??????????,?????????,?????????0.2.0??????,??????????。 Iveely Search Engine ?0.2.0?????????“??????????”,??????,?????????,???????,???????????????????,????、????????????。???0.1.0????????????: 1. ??“????” ??。??????????,?????????,???????????????????。??:????????,????????????,??????????????????。??????。 2. ??“????”??。?0.1.0??????,???????,???????????????,?????????????,????????,?0.2.0?,???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.New ProjectsAjax based Multi Forms ASP.NET Framework (Amfan): Ajax based Multi Forms ASP.NET Framework (Amfan) reduces the limitations of the Asp.Net by creating multiple sub-forms of the page as separate aspx pages.APO-CS: A straight port of Apophysis to C#.BaceCP / ???? ????? ?? ???????? ????: BaceCP e ??????????? ???????? ?? ????????, ??????????? ? ????????? ?? ???? ????? ?? ???????? ????.CafeAdm Messenger: CafeAdm Messenger Allows a server connection for CafeAdm Schedule and MessengerDECnet 2.0 Router: A user mode DECnet 2.0 router that will interoperate with the HECnet bridge.DriveManager: This is a common utility to provide an interface for all cloud based drive providers like google drive, dropbox, MS Sky Drive. Email Tester: This utility will help you check your SMTP settings for SharePoint. It is best for Pre-PROD and PROD environment where you can't modify code.EvoGame: The evo game that im working onforebittims: Project Owner : ForeBitt Inc. Sri Lanka Project Manager : Chackrapani Wickramarathne Technologies : VS 2010, C#, Linq to Sql, Sql server 2008 R2, Dev ExpressMCServe: MCServe is the minecraft-server which takes advantage of the performance of the .NET FrameworkMental: Ðang trong quá trình phát tri?nSalaryManagementSys: SalaryManagementSysVKplay: This application is audio player, launches on windows phone platform and uses music from vk.com social network.

    Read the article

  • Stylecop 4.7.37.0 has been released

    - by TATWORTH
    Stylecop  4.7.37.0 has been released at http://stylecop.codeplex.com/releases/view/79972The release notes follow:Add docs for new SA1650 spelling rule.Fix for 7395. Dont remove parenthesis around await expressions.Insert a returns element into docs within a see element.Update our tools folder StyleCop dll'sfix for 7392. Insert generic type docs for return types correctly.Fix for 7393. Allow documentation elements with attributes to end the string and still be valid.Make sure the MSBuild Task logs the warning id and type of exception. Unless the description field holds all this info VS cannot show the text in the Error List.Load custom dictionaries for multiple cultures. For a culture like en-GB; we load CustomDictionary.xml, then look for CustomDictionary.en-GB.xml and then CustomDictionary.en.xmlUpdate standard shipping dictionaries.Element documentation spelling fixes.Reduce the standard dictionaryUpdate our own devbuild StyleCop checks.Don't check spelling of xml documentation attributes are anything inside  <c> or <code> elements.Update StylingStyling update.Add timestamps for all the dependant files into the StyleCopResults.cache. Add a FileSystemWatcher to all custom dictionary files.Write out the full violation into the StyleCopResults.cache.Change a rules description text.Styling fixes.Styling fixes.NEW RULE: Check Spelling Of Element Documetation. Fix over 2000 spelling errors in our source code. Update the VS addin to show the rule violation in more detail. Add spelling checker to the deployment.Set our own Culture to en-USDocumentation spelling fixes.First draft of the documentation spelling checker.Fix for 7325. Don't throw 1126 in goto statements.Fix for 7090. Add TargetsDir to registry during install.Fix for 7060. Sort usings after moving them inside namespace.Fix FxCop issues.Fix for 7389. Detect CpuCount on Unix/MACFix for 6788. Allow opening curly brackets for scope. Added new tests.Updating constants.Fix for 7167. Show version number of StyleCop in VS Help window.Only output StyleCop excluded files if there are any.

    Read the article

  • Reporting available RDP sessions

    - by Sergei
    Hi All Default Windows 2003 Server has two RDP sessions available.If all of them are taken by someone else you will only be notified about it after providing your credentials. This seems like a waste of time especially in our environment where we share a lot of development server. Could a message be given as soon as you open the connection window if the connections are taken up? We can use qwinsta based script to check sessions before logon but it's still takes time. Is there a feature to do what I am asking for?

    Read the article

  • View unknown content-types in Firefox?

    - by dirtside
    A certain URL on my server returns Content-Type: application/json. The filename ends with .phtml, so whenever I go to it, Firefox 3.5 asks me if I want to save it or open it with another program. But the answer is neither; I want to view it in Firefox as if it was text/plain. Suggestions? The Applications tab of the Preferences window doesn't give this as an option for the "PHTML" type which now is listed in there (ever since I tried to open it with no external program).

    Read the article

  • Ubuntu: Alternative task-switcher to what is provided in compiz

    - by user22106
    I'm running Ubuntu 11.04 and really enjoying it. The task switcher default in Ubuntu shows a list of small icons for each running app much like the windows task switcher. It's fast and effective. I enabled Compiz and noticed that the task switcher changed to one with small thumbnails showing a smaller version of each window. Nice, but it slows the task manager down to about 0.5 seconds to display, which for me is far too long. Have googled the forums and it's a very common problem with ubuntu/compiz. I want to run compiz as it provides so many other features, but the slow task switcher is just not going to run with me. So was wondering if there is some way of NOT letting compiz override the task switcher, or, if there is some other task switcher that I can install which will not be slow like the compiz one. Any help would be appreciated.

    Read the article

  • tunneling x11vnc through ssh on a non standard port to ubuntu computer tightvnc

    - by user72372
    I have been stuck with setting up my virtual desktop on my ubuntu laptop. I am running ubuntu to ubuntu with x11vnc I start the process on my laptop as follows: " ssh -L5904:localhost:5900 -p Port remoteuser@remoteip." That command works, then I start x11vnc server, "x11vnc -noncache -once -shared -rfbauth ~/.vnc/passwd." This command works and starts connection. Then I open another window on my laptop and type, export VNC_VIA_CMD='/usr/bin/ssh -2 -c aes128-cbc -x -p Port -l User -f -: %L:%H:%R %G sleep 20' (not sure if works). then I type, vncviewer -endcodings Tight -depth 8 -quality 1 -via IPofremotemachine -u remoteuser localhost:01. The first time it work but from now on it just gives me the vncviewer -help screen everytime. I type in the password for my remote machine and then shows -help screen for vncviewer. I think the problem is with Tightvnc viewer but don't know what. Please help. I got some info on www.vanemery.com/Linux/VNC/vnc-over-ssh.html?.

    Read the article

  • seamless mode remote desktop connection from linux to windows

    - by mateusz.fiolka
    I am a programmer using Linux as my main OS, however sometimes I need to use windows (ie, office, ea). I'm running qemu with kvm to access the windows "machine". I would like to achieve something that is described here: https://help.ubuntu.com/community/SeamlessVirtualization (It means I would be able to run chosen applications on Windows and then display them locally on Linux as separate windows achieving good desktop integration). However seamless rdp is buggy and doesn't work on my machine (probably because I'm using a tiling window manager and a 64bit system). Are you aware of any other solution then rdp seamless mode? I would prefer to still use quemu because it uses cpu hardware virtualization, so different protocol/client combination would be preferable.

    Read the article

  • WMV file won't play in Windows Media Player

    - by user1053768
    I have a .wmv file I uploaded to my website. When I click the link to the video, the video plays in Windows Media Player without any problems. However, on some systems when the user clicks the link, Windows Media Player gives them the error: Window Media Player cannot play the file. The player might not support the file type or might not support the codec that was used to compress the file All I did was copy the video to the server and store the URL in a database. Why are users getting this error? How can I fix it?

    Read the article

< Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >