Search Results

Search found 13164 results on 527 pages for 'missing'.

Page 478/527 | < Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >

• Do you still limit line length in code?

  - by Noldorin

  This is a matter on which I would like to gauge the opinion of the community: Do you still limit the length of lines of code to a fixed maximum? This was certainly a convention of the past for many languages; one would typically cap the number of characters per line to a value such as 80 (and more recnetly 100 or 120 I believe). As far as I understand, the primary reasons for limiting line length are: Readability - You don't have to scroll over horizontally when you want to see the end of some lines. Printing - Admittedly (at least in my experience), most code that you are working on does not get printed out on paper, but by limiting the number of characters you can insure that formatting doesn't get messed up when printed. Past editors (?) - Not sure about this one, but I suspect that at some point in the distant past of programming, (at least some) text editors may have been based on a fixed-width buffer. I'm sure there are points that I am still missing out, so feel free to add to these... Now, when I tend to observe C or C# code nowadays, I often see a number of different styles, the main ones being: Line length capped to 80, 100, or even 120 characters. As far as I understand, 80 is the traditional length, but the longer ones of 100 and 120 have appeared because of the widespread use of high resolutions and widescreen monitors nowadays. No line length capping at all. This tends to be pretty horrible to read, and I don't see it too often, though it's certainly not too rare either. Inconsistent capping of line length. The length of some lines are limited to a fixed maximum (or even a maximum that changes depending on the file/location in code), while others (possibly comments) are not at all. My personal preference here (at least recently) has been to cap the line length to 100 in the Visual Studio editor. This means that in a decently sized window (on a non-widescreen monitor), the ends of lines are still fully visible. I can however see a few disadvantages in this, especially when you end up writing code that's indented 3 or 4 levels and then having to include a long string literal - though I often take this as a sign to refactor my code! In particular, I am curious what the C and C# coders (or anyone who uses Visual Studio for that matter) think about this point, though I would be interested in hearing anyone's thoughts on the subject. Edit Thanks for the all answers - I appreciate the variety of opinions here, all presenting sound reasons. Consensus does seem to be tipping in the direction of always (or almost always) limit the line length. Interestingly, it seems to be in various coding standards to limit the line length. Judging by some of the answers, both the Python and Google CPP guidelines set the limit at 80 chars. I haven't seen anything similar regarding C# or VB.NET, but I would be curious to see if there are ones anywhere.

  Read the article

• GWT styles not applying

  - by sernaferna

  I'm creating a GWT application that uses UiBinder, and I've come across a bizarre problem where styles aren't applying to my elements--until I refresh the browser, and then the styles briefly get applied, in that fraction of a second before the page refreshes. In other words: Open page; none of my defined styles are used. Hit Refresh For a fraction of a second the styles are used, before the page goes blank The page reloads, without the styles again I'm going to include my entire *ui.xml file, because it's not too big. <!DOCTYPE ui:UiBinder SYSTEM "http://dl.google.com/gwt/DTD/xhtml.ent"> <ui:UiBinder xmlns:ui="urn:ui:com.google.gwt.uibinder" xmlns:g="urn:import:com.google.gwt.user.client.ui"> <ui:style> .idLabelStyle { font-weight: bold; text-align: center; width: 100px; border-style: solid; border-width: 1px; margin-right: 5px; } .nameLabelStyle { font-weight: bold; text-align: center; width: 500px; border-style: solid; border-width: 1px; margin-right: 5px; } .addressLabelStyle { font-weight: bold; text-align: center; width: 500px; border-style: solid; border-width: 1px; } </ui:style> <g:HTMLPanel> <g:HorizontalPanel> <g:Label addStyleNames="{style.idLabelStyle}">ID</g:Label> <g:Label addStyleNames="{style.nameLabelStyle}">Name</g:Label> <g:Label addStyleNames="{style.addressLabelStyle}">Address</g:Label> </g:HorizontalPanel> </g:HTMLPanel> </ui:UiBinder> I really hope I'm missing something simple.

  Read the article

• Suggestions for designing large-scale Java webapp from the group up

  - by Chris Thompson

  Hi all, I'm about to start developing a large-scale system and I'm struggling with which direction to proceed. I've done plenty of Java web apps before and I have plenty of experience with servlet containers and GWT and some experience with Spring. The problem is most of my webapps have been thrown together just to be a proof of concept and what I'm struggling with is what set of frameworks to use. I need to have both a browser based application as well as a web service designed to support access from mobile devices (Android and iPhone for now). Ideally, I'd like to design this system in such a way that I don't end up rewriting all of my servlets for each client (browser and phone) although I don't mind having some small checks in there to properly format the data. In addition, although I'm the only developer now, that won't necessarily be the case down the road and I'd like to design something that scales well both with regards to traffic and number of developers (isn't just a nightmare to maintain). So where I am now is planning on using GWT to design the browser-based interface but I'm struggling with how to reuse that code with to present the interface (most likely xml) for the mobile devices. Using GWT RPC would, I think, make it relatively easy to do all of the AJAX in the browser, but might make generating xml for the mobile phones difficult. In addition, I like the idea of using something like Hibernate for persistence and Spring Security to secure the whole thing. Again, I'm not sure how well those will cooperate with GWT (I think Hibernate should be fine...) There's obviously a lot more to this than I've presented here, but I've tried to give you the 5-minute overview. I'm a bit stumped and was wondering if anybody in the community had any experience starting from this place. Does what I'm trying to do make sense? Is it realistic? I have no doubt I can make all of these frameworks speak the same language, I'm just wondering if it's worth my time to fight with them. Also, am I missing a framework that would be really beneficial? Thanks in advance and sorry for the relatively broad question... Chris

  Read the article

• Can't build gem -- native extension build fails -- can you see why?

  - by marfarma

  I can't figure out what is going wrong here -- any ideas?? I'm running on a Ubuntu 8.04 LTS, and have installed libxml2 and libxslt from these instructions: http://www.techsww.com/tutorials/libraries/libxml/installation/installing_libxml_on_ubuntu_linux.php http://www.techsww.com/tutorials/libraries/libxslt/installation/installing_libxslt_on_ubuntu_linux.php However, I installed the latest versions: libxslt-1.1.24 libxml2-2.7.3 The install was uneventful -------------------- I set LD_LIBRARY_PATH ---------------------------------- echo $LD_LIBRARY_PATH /usr/local/libxslt/lib: ------------- seems like the function is present -- at least based on the output of strings ------------ /usr/local/libxslt/lib$ strings * | grep ParseStylesheetDoc xsltParseStylesheetDoc xsltParseStylesheetDoc xsltParseStylesheetDoc xsltParseStylesheetDoc xsltParseStylesheetDoc xsltParseStylesheetDoc xsltParseStylesheetDoc ----------------------- But the compile still fails ---------------------------------------- sudo gem install webrat Building native extensions. This could take a while... ERROR: Error installing webrat: ERROR: Failed to build gem native extension. /usr/local/bin/ruby extconf.rb install webrat checking for iconv.h in /opt/local/include/,/opt/local/include/libxml2,/opt/local/include,/opt/local/include,/opt/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/include,/usr/include/libxml2... yes checking for libxml/parser.h in /opt/local/include/,/opt/local/include/libxml2,/opt/local/include,/opt/local/include,/opt/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/include,/usr/include/libxml2... yes checking for libxslt/xslt.h in /opt/local/include/,/opt/local/include/libxml2,/opt/local/include,/opt/local/include,/opt/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/include,/usr/include/libxml2... yes checking for libexslt/exslt.h in /opt/local/include/,/opt/local/include/libxml2,/opt/local/include,/opt/local/include,/opt/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/include,/usr/include/libxml2... yes checking for xmlParseDoc() in -lxml2... yes checking for xsltParseStylesheetDoc() in -lxslt... no libxslt is missing. try 'port install libxslt' or 'yum install libxslt-devel' *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/local/bin/ruby --with-iconv-dir --without-iconv-dir --with-iconv-include --without-iconv-include=${iconv-dir}/include --with-iconv-lib --without-iconv-lib=${iconv-dir}/lib --with-xml2-dir --without-xml2-dir --with-xml2-include --without-xml2-include=${xml2-dir}/include --with-xml2-lib --without-xml2-lib=${xml2-dir}/lib --with-xslt-dir --without-xslt-dir --with-xslt-include --without-xslt-include=${xslt-dir}/include --with-xslt-lib --without-xslt-lib=${xslt-dir}/lib --with-xml2lib --without-xml2lib --with-xsltlib --without-xsltlib Gem files will remain installed in /usr/local/lib/ruby/gems/1.8/gems/nokogiri-1.3.3 for inspection. Results logged to /usr/local/lib/ruby/gems/1.8/gems/nokogiri-1.3.3/ext/nokogiri/gem_make.out

  Read the article

• F# Equivalent to Enumerable.OfType<'a>

  - by Joel Mueller

  ...or, how do I filter a sequence of classes by the interfaces they implement? Let's say I have a sequence of objects that inherit from Foo, a seq<#Foo>. In other words, my sequence will contain one or more of four different subclasses of Foo. Each subclass implements a different independent interface that shares nothing with the interfaces implemented by the other subclasses. Now I need to filter this sequence down to only the items that implement a particular interface. The C# version is simple: void MergeFoosIntoList<T>(IEnumerable<Foo> allFoos, IList<T> dest) where T : class { foreach (var foo in allFoos) { var castFoo = foo as T; if (castFoo != null) { dest.Add(castFoo); } } } I could use LINQ from F#: let mergeFoosIntoList (foos:seq<#Foo>) (dest:IList<'a>) = System.Linq.Enumerable.OfType<'a>(foos) |> Seq.iter dest.Add However, I feel like there should be a more idiomatic way to accomplish it. I thought this would work... let mergeFoosIntoList (foos:seq<#Foo>) (dest:IList<'a>) = foos |> Seq.choose (function | :? 'a as x -> Some(x) | _ -> None) |> Seq.iter dest.Add However, the complier complains about :? 'a - telling me: This runtime coercion or type test from type 'b to 'a involves an indeterminate type based on information prior to this program point. Runtime type tests are not allowed on some types. Further type annotations are needed. I can't figure out what further type annotations to add. There's no relationship between the interface 'a and #Foo except that one or more subclasses of Foo implement that interface. Also, there's no relationship between the different interfaces that can be passed in as 'a except that they are all implemented by subclasses of Foo. I eagerly anticipate smacking myself in the head as soon as one of you kind people points out the obvious thing I've been missing.

  Read the article

• Rails find over multiple models

  - by kgb

  I think I'm missing something very obvious and its making my brain hurt. class User < ActiveRecord::Base has_one :profile class Profile < ActiveRecord::Base has_one :user belongs_to :team I have a partial that loops through the users and print some basic info, I'm using this partial in my team show page. I had originally written this to return users who's profiles were a member of a team. def show @team = Team.find_by_id(params[:id]) @profiles= Profile.find(:all, :conditions => ['team_id = ?', @team.id]) @users = User.find_by_id(@profiles.user_id) end But quickly realized @profiles was an array, and it looks messy as hell. Stuck as to what my find should look like to select all User who have a profile that is a member of a team. The partial that is working elsewhere for displaying users looks like this <% for user in @users%> <table> <tr> <td> <%= image_tag user.profile.picture.url %> </td> <td> <a href="/users/<%= user.id %>"><%= user.login %></a> </td> <td> <%= user.profile.first_name %> <%= user.profile.second_name %> </td> <td> <%= user.profile.status %> </td> </tr> </table> <% end %> Development log output with updated show and relationships Processing TeamsController#show (for 127.0.0.1 at 2010-03-30 22:06:31) [GET] Parameters: {"id"=>"1"} User Load (1.3ms) SELECT * FROM "users" WHERE ("users"."id" = 3) LIMIT 1 Team Load (1.0ms) SELECT * FROM "teams" WHERE ("teams"."id" = 1) Rendering template within layouts/main Rendering teams/show Completed in 75ms (View: 11, DB: 2) | 200 OK [http://localhost/teams/1]

  Read the article

• What is the best python module skeleton code?

  - by user213060

  == Subjective Question Warning == Looking for well supported opinions or supporting evidence. Let us assume that skeleton code can be good. If you disagree with the very concept of module skeleton code then fine, but please refrain from repeating that opinion here. Many python IDE's will start you with a template like: print 'hello world' That's not enough... So here's my skeleton code to get this question started: My Module Skeleton, Short Version: #!/usr/bin/env python """ Module Docstring """ # ## Code goes here. # def test(): """Testing Docstring""" pass if __name__=='__main__': test() and, My Module Skeleton, Long Version: #!/usr/bin/env python # -*- coding: ascii -*- """ Module Docstring Docstrings: http://www.python.org/dev/peps/pep-0257/ """ __author__ = 'Joe Author ([email protected])' __copyright__ = 'Copyright (c) 2009-2010 Joe Author' __license__ = 'New-style BSD' __vcs_id__ = '$Id$' __version__ = '1.2.3' #Versioning: http://www.python.org/dev/peps/pep-0386/ # ## Code goes here. # def test(): """ Testing Docstring""" pass if __name__=='__main__': test() Notes: """ ===MODULE TYPE=== Since the vast majority of my modules are "library" types, I have constructed this example skeleton as such. For modules that act as the main entry for running the full application, you would make changes such as running a main() function instead of the test() function in __main__. ===VERSIONING=== The following practice, specified in PEP8, no longer makes sense: __version__ = '$Revision: 1.2.3 $' for two reasons: (1) Distributed version control systems make it neccessary to include more than just a revision number. E.g. author name and revision number. (2) It's a revision number not a version number. Instead, the __vcs_id__ variable is being adopted. This expands to, for example: __vcs_id__ = '$Id: example.py,v 1.1.1.1 2001/07/21 22:14:04 goodger Exp $' ===VCS DATE=== Likewise, the date variable has been removed: __date__ = '$Date: 2009/01/02 20:19:18 $' ===CHARACTER ENCODING=== If the coding is explicitly specified, then it should be set to the default setting of ascii. This can be modified if necessary (rarely in practice). Defaulting to utf-8 can cause anomalies with editors that have poor unicode support. """ There are a lot of PEPs that put forward coding style recommendations. Am I missing any important best practices? What is the best python module skeleton code? Update Show me any kind of "best" that you prefer. Tell us what metrics you used to qualify "best".

  Read the article

• Dynamic Linq help, different errors depending on object passed as parameter?

  - by sah302

  I have an entityDao that is inherbited by everyone of my objectDaos. I am using Dynamic Linq and trying to get some generic queries to work. I have the following code in my generic method in my EntityDao : public abstract class EntityDao<ImplementationType> where ImplementationType : Entity { public ImplementationType getOneByValueOfProperty(string getProperty, object getValue){ ImplementationType entity = null; if (getProperty != null && getValue != null) { LCFDataContext lcfdatacontext = new LCFDataContext(); //Generic LINQ Query Here entity = lcfdatacontext.GetTable<ImplementationType>().Where(getProperty + " =@0", getValue).FirstOrDefault(); //.Where(getProperty & "==" & CStr(getValue)) } //lcfdatacontext.SubmitChanges() //lcfdatacontext.Dispose() return entity; } }         Then I do the following method call in a unit test (all my objectDaos inherit entityDao): [Test] public void getOneByValueOfProperty() { Accomplishment result = accomplishmentDao.getOneByValueOfProperty("AccomplishmentType.Name", "Publication"); Assert.IsNotNull(result); } The above passes (AccomplishmentType has a relationship to accomplishment) Accomplishment result = accomplishmentDao.getOneByValueOfProperty("Description", "Can you hear me now?"); Accomplishment result = accomplishmentDao.getOneByValueOfProperty("LocalId", 4); Both of the above work Accomplishment result = accomplishmentDao.getOneByValueOfProperty("Id", New Guid("95457751-97d9-44b5-8f80-59fc2d170a4c"))       Does not work and says the following: Operator '=' incompatible with operand types 'Guid' and 'Guid Why is this happening? Guid's can't be compared? I tried == as well but same error. What's even moreso confusing is that every example of Dynamic Linq I have seen simply usings strings whether using the parameterized where predicate or this one I have commented out: //.Where(getProperty & "==" & CStr(getValue)) With or without the Cstr, many datatypes don't work with this format. I tried setting the getValue to a string instead of an object as well, but then I just get different errors (such as a multiword string would stop comparison after the first word). What am I missing to make this work with GUIDs and/or any data type? Ideally I would like to be able to just pass in a string for getValue (as I have seen for every other dynamic LINQ example) instead of the object and have it work regardless of the data Type of the column.

  Read the article

• memcpy segmentation fault on linux but not os x

  - by Andre

  I'm working on implementing a log based file system for a file as a class project. I have a good amount of it working on my 64 bit OS X laptop, but when I try to run the code on the CS department's 32 bit linux machines, I get a seg fault. The API we're given allows writing DISK_SECTOR_SIZE (512) bytes at a time. Our log record consists of the 512 bytes the user wants to write as well as some metadata (which sector he wants to write to, the type of operation, etc). All in all, the size of the "record" object is 528 bytes, which means each log record spans 2 sectors on the disk. The first record writes 0-512 on sector 0, and 0-15 on sector 1. The second record writes 16-512 on sector 1, and 0-31 on sector 2. The third record writes 32-512 on sector 2, and 0-47 on sector 3. ETC. So what I do is read the two sectors I'll be modifying into 2 freshly allocated buffers, copy starting at record into buf1+the calculated offset for 512-offset bytes. This works correctly on both machines. However, the second memcpy fails. Specifically, "record+DISK_SECTOR_SIZE-offset" in the below code segfaults, but only on the linux machine. Running some random tests, it gets more curious. The linux machine reports sizeof(Record) to be 528. Therefore, if I tried to memcpy from record+500 into buf for 1 byte, it shouldn't have a problem. In fact, the biggest offset I can get from record is 254. That is, memcpy(buf1, record+254, 1) works, but memcpy(buf1, record+255, 1) segfaults. Does anyone know what I'm missing? Record *record = malloc(sizeof(Record)); record->tid = tid; record->opType = OP_WRITE; record->opArg = sector; int i; for (i = 0; i < DISK_SECTOR_SIZE; i++) { record->data[i] = buf[i]; // *buf is passed into this function } char* buf1 = malloc(DISK_SECTOR_SIZE); char* buf2 = malloc(DISK_SECTOR_SIZE); d_read(ad->disk, ad->curLogSector, buf1); d_read(ad->disk, ad->curLogSector+1, buf2); memcpy(buf1+offset, record, DISK_SECTOR_SIZE-offset); memcpy(buf2, record+DISK_SECTOR_SIZE-offset, offset+sizeof(Record)-sizeof(record->data));

  Read the article

• How is IObservable<double>.Average supposed to work?

  - by Dan Tao

  Update Looks like Jon Skeet was right (big surprise!) and the issue was with my assumption about the Average extension providing a continuous average (it doesn't). For the behavior I'm after, I wrote a simple ContinuousAverage extension method, the implementation of which I am including here for the benefit of others who may want something similar: public static class ObservableExtensions { private class ContinuousAverager { private double _mean; private long _count; public ContinuousAverager() { _mean = 0.0; _count = 0L; } // undecided whether this method needs to be made thread-safe or not // seems that ought to be the responsibility of the IObservable (?) public double Add(double value) { double delta = value - _mean; _mean += (delta / (double)(++_count)); return _mean; } } public static IObservable<double> ContinousAverage(this IObservable<double> source) { var averager = new ContinuousAverager(); return source.Select(x => averager.Add(x)); } } I'm thinking of going ahead and doing something like the above for the other obvious candidates as well -- so, ContinuousCount, ContinuousSum, ContinuousMin, ContinuousMax ... perhaps ContinuousVariance and ContinuousStandardDeviation as well? Any thoughts on that? Original Question I use Rx Extensions a little bit here and there, and feel I've got the basic ideas down. Now here's something odd: I was under the impression that if I wrote this: var ticks = Observable.FromEvent<QuoteEventArgs>(MarketDataProvider, "MarketTick"); var bids = ticks .Where(e => e.EventArgs.Quote.HasBid) .Select(e => e.EventArgs.Quote.Bid); var bidsSubscription = bids.Subscribe( b => Console.WriteLine("Bid: {0}", b) ); var avgOfBids = bids.Average(); var avgOfBidsSubscription = avgOfBids.Subscribe( b => Console.WriteLine("Avg Bid: {0}", b) ); I would get two IObservable<double> objects (bids and avgOfBids); one would basically be a stream of all the market bids from my MarketDataProvider, the other would be a stream of the average of these bids. So something like this: Bid Avg Bid 1 1 2 1.5 1 1.33 2 1.5 It seems that my avgOfBids object isn't doing anything. What am I missing? I think I've probably misunderstood what Average is actually supposed to do. (This also seems to be the case for all of the aggregate-like extension methods on IObservable<T> -- e.g., Max, Count, etc.)

  Read the article

• open layers LineString not working

  - by AlexS

  Sorry to bother you guys, but I'm stuck with his problem for half a day. I want to draw poly line in OpenLayers using LineString object, so I've copied the example from documentation. It runs ok but i can't see the line on the screen Code looks like this <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> var map; var lineLayer ; var points; var style; var polygonFeature function test() { lineLayer = new OpenLayers.Layer.Vector("Line Layer"); style = { strokeColor: '#0000ff', strokeOpacity: 1, strokeWidth: 10 }; map.addLayer(lineLayer); points = new Array(); points[0] =new OpenLayers.LonLat(-2.460181,27.333984 ).transform(new OpenLayers.Projection("EPSG:4326"), map.getProjectionObject());; points[1] = new OpenLayers.LonLat(-3.864255,-22.5 ).transform(new OpenLayers.Projection("EPSG:4326"), map.getProjectionObject());; var linear_ring = new OpenLayers.Geometry.LinearRing(points); polygonFeature = new OpenLayers.Feature.Vector( new OpenLayers.Geometry.Polygon([linear_ring]), null, style); lineLayer.addFeatures([polygonFeature]); alert("1"); } function initialize() { map = new OpenLayers.Map ("map_canvas", { controls:[ new OpenLayers.Control.Navigation(), new OpenLayers.Control.PanZoomBar(), new OpenLayers.Control.LayerSwitcher(), new OpenLayers.Control.Attribution()], maxExtent: new OpenLayers.Bounds(-20037508.34,-20037508.34,20037508.34,20037508.34), maxResolution: 156543.0399, numZoomLevels: 19, units: 'm', projection: new OpenLayers.Projection("EPSG:900913"), displayProjection: new OpenLayers.Projection("EPSG:4326") }); // Define the map layer // Here we use a predefined layer that will be kept up to date with URL changes layerMapnik = new OpenLayers.Layer.OSM.Mapnik("Mapnik"); map.addLayer(layerMapnik); var lonLat = new OpenLayers.LonLat(0, 0).transform(new OpenLayers.Projection("EPSG:4326"), map.getProjectionObject()); map.zoomTo(3); map.setCenter(lonLat, 19); test(); } </head> <body onload="initialize()" > <div id="map_canvas" style="width: 828px; height: 698px"></div> I'm sure I'm missing some parameter in creation of map or something but I really can't figure which one.

  Read the article

• Is this a situation where Qt Model/View architecture is not useful?

  - by csmithmaui

  Hi, I am writing a GUI based application where I read a string of values from serial port every few seconds and I need to display most of the values in some type graphical indicator(I was thinking of QprogressBar maybe) that displays the range and the value. Some of the other data that I am parsing from the string are the date and fault codes. Also, the data is hierarchical. I wanted to use the model/view architecture of Qt because I have been interested in MVC stuff for a while but have never quite wrapped my brain around how to implement it very well. As of now, I have subclassed QAbstractItemModel and in the model I read the serial port and wrap the items parsed from the string in a Tree data structure. I can view all of the data in a QtreeView with no issues. I have also began to subclass QAbstractItemView to build my custom view with all of the Graphical Indicators and such. This is where I am getting stuck. It seems to me that in order for me to design a view that knows how to display my custom model the view needs to know exactly how all of the data in the model is organized. Doesn't that defeat the purpose of Model/View? The QTreeView I tested the model with is basically just displaying the model as it is setup in the Tree structure but I don't want to do that because the data is not all of the same type. Is the type of data or the way you would like to present it to the user a determining factor in whether or not you should use this architecture? I always assumed it was just always better to design in an MVC style. It seems to me like it might have been better to just subclass QWidget and then read in from the serial port and update all of subwidgets(graphical indicators, labels, etc...) from the subclass. Essentially, do everything in one class. Does anybody understand this issue that can explain to me either what I am missing or why I shouldn't be doing it this way. As of now I am a little confused. Thanks so much for any help!

  Read the article

• How to Add an Attachment to a User Story using Rally REST .NET

  - by user1373451

  We're in the process of porting our .NET Rally code from SOAP to the REST .NET API. One thing I'm looking to replicate is the ability to upload attachments. I'm following a very similar procedure as to the one outlined in this posting: Rally SOAP API - How do I add an attachment to a Hierarchical Requirement Whereby the image is read into a System.Drawing.Image. We use the ImageToBase64 function to convert the image to a byte array which then gets assigned to the AttachmentContent, which is created first. Then, the Attachment gets created, and wired up to both AttachmentContent, and the HierarchicalRequirement. All of the creation events work great. A new attachment called "Image.png" gets created on the Story. However, when I download the resulting attachment from Rally, Image.png has zero bytes! I've tried this with different images, JPEG's, PNG's, etc. all with the same results. An excerpt of the code showing the process is included below. Is there something obvious that I'm missing? Thanks in advance. // .... Read content into a System.Drawing.Image.... // Convert Image to Base64 format byte[] imageBase64Format = ImageToBase64(imageObject, System.Drawing.Imaging.ImageFormat.Png); var imageLength = imageBase64Format.Length; // AttachmentContent DynamicJsonObject attachmentContent = new DynamicJsonObject(); attachmentContent["Content"] = imageBase64Format; CreateResult cr = restApi.Create("AttachmentContent", myAttachmentContent); String contentRef = cr.Reference; Console.WriteLine("Created: " + contentRef); // Tee up attachment DynamicJsonObject newAttachment = new DynamicJsonObject(); newAttachment["Artifact"] = story; newAttachment["Content"] = attachmentContent; newAttachment["Name"] = "Image.png"; newAttachment["ContentType"] = "image/png"; newAttachment["Size"] = imageLength; newAttachment["User"] = user; cr = restApi.Create("Attachment", newAttachment); String attachRef = attachRef.Reference; Console.WriteLine("Created: " + attachRef); } public static byte[] ImageToBase64(Image image, System.Drawing.Imaging.ImageFormat format) { using (MemoryStream ms = new MemoryStream()) { image.Save(ms, format); // Convert Image to byte[] byte[] imageBytes = ms.ToArray(); return imageBytes; } }

  Read the article

• Trouble binding command in grid menu item.

  - by Pete

  I have a grid that's inside a usercontrol derived class called MediatedUserControl. I'm adding a context menu to let the user delete an item, but I've been unable to figure out how to bind the command to my command property. I'm using MVVM and my viewmodel implements a public ICommand property called DeleteSelectedItemCommand. However, when the view is displayed, I get the following message in the output window: System.Windows.Data Error: 4 : Cannot find source for binding with reference 'RelativeSource FindAncestor, AncestorType='BRO.View.MediatedUserControl', AncestorLevel='1''. BindingExpression:Path=DataContext.DeleteSelectedItemCommand; DataItem=null; target element is 'BarButtonItem' (HashCode=6860584); target property is 'Command' (type 'ICommand') I feel like I generally have a good handle on bindings like this and can't figure out what it is I'm missing here. Thanks for any help you can provide. <dxg:GridControl HorizontalAlignment="Left" Margin="12,88,0,0" x:Name="gridControl1" VerticalAlignment="Top" Height="500" Width="517" DataSource="{Binding ItemList}" BorderBrush="{StaticResource {x:Static SystemColors.ActiveBorderBrushKey}}" ShowBorder="True" Background="{StaticResource {x:Static SystemColors.ControlLightBrushKey}}" UseLayoutRounding="False" DataContext="{Binding}"> <dxg:GridControl.Columns> <dxg:GridColumn FieldName="Code" Header="Code" Width="107" /> <dxg:GridColumn FieldName="Name" Header="Item" Width="173" /> <dxg:GridColumn FieldName="PricePerItem" Header="Unit Price" Width="70"> <dxg:GridColumn.EditSettings> <dxe:TextEditSettings DisplayFormat="N2" /> </dxg:GridColumn.EditSettings> </dxg:GridColumn> <dxg:GridColumn FieldName="Quantity" Header="Qty" Width="50" AllowEditing="True" /> <dxg:GridColumn FieldName="TotalPrice" Header="Total Price" Width="90"> <dxg:GridColumn.EditSettings> <dxe:TextEditSettings DisplayFormat="N2" /> </dxg:GridColumn.EditSettings> </dxg:GridColumn> </dxg:GridControl.Columns> <dxg:GridControl.View> <dxg:TableView ShowIndicator="False" ShowGroupPanel="False" MultiSelectMode="Row" AllowColumnFiltering="False" AllowBestFit="False" AllowFilterEditor="False" AllowEditing="False" AllowGrouping="False" AllowSorting="False" AllowResizing="False" AllowMoving="False" AllowMoveColumnToDropArea="False" AllowDateTimeGroupIntervalMenu="False" > <dxg:TableView.RowCellMenuCustomizations> <dxb:BarButtonItem Name="deleteRowItem" Command="{Binding RelativeSource={RelativeSource FindAncestor, AncestorType=view:MediatedUserControl, AncestorLevel=1}, Path=DataContext.DeleteSelectedItemCommand}"> </dxb:BarButtonItem> </dxg:TableView.RowCellMenuCustomizations> </dxg:TableView> </dxg:GridControl.View>

  Read the article

• ListBox item doesn't get refresh in WPF?

  - by sanjeev40084

  I have a listbox which has couple of items. When double clicked on each item, the user get option to edit item (text of item). Now once i update the item, my item in listbox doesn't get updated. The first window (one which has listbox) is in MainWindow.xaml file and second window is in EditTaskView.xaml(one which let's edit the items text) file. The code that displays items in lists is: Main.Windows.cs public static ObservableCollection TaskList; public void GetTask() { TaskList = new ObservableCollection<Task> { new Task("Task1"), new Task("Task2"), new Task("Task3"), new Task("Task4") }; lstBxTask.ItemsSource = TaskList; } private void lstBxTask_MouseDoubleClick(object sender, MouseButtonEventArgs e) { var selectedTask = (Task)lstBxTask.SelectedItem; EditTask.txtBxEditedText.Text = selectedTask.Taskname; EditTask.PreviousTaskText = selectedTask.Taskname; EditTask.Visibility = Visibility.Visible; } The xaml code that displays the list: <ListBox x:Name="lstBxTask" Style="{StaticResource ListBoxItems}" MouseDoubleClick="lstBxTask_MouseDoubleClick"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel> <Rectangle Style="{StaticResource LineBetweenListBox}"/> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Taskname}" Style="{StaticResource TextInListBox}"/> <Button Name="btnDelete" Style="{StaticResource DeleteButton}" Click="btnDelete_Click"/> </StackPanel> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> <ToDoTask:EditTaskView x:Name="EditTask" Grid.Row="1" Grid.RowSpan="2" Grid.ColumnSpan="2" Visibility="Collapsed"/> The Save button in TaskEditView.xaml does this: public string PreviousTaskText { get; set; } private void btnSaveEditedText_Click(object sender, RoutedEventArgs e) { foreach (var t in MainWindow.TaskList) { if (t.Taskname == PreviousTaskText) { t.Taskname = txtBxEditedText.Text; } } Visibility = Visibility.Collapsed; } TaskList is the ObservableCollection, and i though once you update the value the UI gets refreshed. But doesn't seem to work that way. What am i missing?

  Read the article

• Maven webapp with maven-eclipse-plugin doesn't generates <dependent-module>

  - by chrsk

  I use the eclipse:eclipse goal to generate an Eclipse Project environment. The deployment works fine. The goal creates the var classpath entries for all needed dependencies. With m2eclipse there was the Maven Container which defines an export folder which was WEB-INF/lib for me. But i don't want to rely on m2eclipse so i don't use it anymore. the class path entries which are generated by eclipse:eclipse goal don't have such a export folder. While booting the servlet container with WTP it publishes all resources and classes except the libraries to the context. Whats missing to publish the needed libs, or isn't that possible without m2eclipse integration? Enviroment Eclipse 3.5 JEE Galileo Apache Maven 2.2.1 (r801777; 2009-08-06 21:16:01+0200) Java version: 1.6.0_14 m2eclipse The maven-eclipse-plugin configuration <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-eclipse-plugin</artifactId> <version>2.8</version> <configuration> <projectNameTemplate>someproject-[artifactId]</projectNameTemplate> <useProjectReferences>false</useProjectReferences> <downloadSources>false</downloadSources> <downloadJavadocs>false</downloadJavadocs> <wtpmanifest>true</wtpmanifest> <wtpversion>2.0</wtpversion> <wtpapplicationxml>true</wtpapplicationxml> <wtpContextName>someproject-[artifactId]</wtpContextName> <additionalProjectFacets> <jst.web>2.3</jst.web> </additionalProjectFacets> </configuration> </plugin> The generated files After executing the eclipse:eclipse goal, the dependent-module is not listed in my generated .settings/org.eclipse.wst.common.component, so on server booting i miss the depdencies. This is what i get: <?xml version="1.0" encoding="UTF-8"?> <project-modules id="moduleCoreId" project-version="1.5.0"> <wb-module deploy-name="someproject-core"> <wb-resource deploy-path="/" source-path="src/main/java"/> <wb-resource deploy-path="/" source-path="src/main/webapp"/> <wb-resource deploy-path="/" source-path="src/main/resources"/> </wb-module> </project-modules>

  Read the article

• How to create JPA EntityMananger in Spring Context?

  - by HDave

  I have a JPA/Spring application that uses Hibernate as the JPA provider. In one portion of the code, I have to manually create a DAO in my application with the new operator rather than use Spring DI. When I do this, the @PersistenceContext annotation is not processed by Spring. In my code where I create the DAO I have an EntityManagerFactory which I used to set the entityManager as follows: @PersistenceUnit private EntityManagerFactory entityManagerFactory; MyDAO dao = new MyDAOImpl(); dao.setEntityManager(entityManagerFactory.createEntityManager()); The problem is that when I do this, I get a Hibernate error: Could not find UserTransaction in JNDI [java:comp/UserTransaction] It's as if the HibernateEntityManager never received all the settings I've configured in Spring: <bean id="myAppTestLocalEmf" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean"> <property name="persistenceUnitName" value="myapp-core" /> <property name="persistenceUnitPostProcessors"> <bean class="com.myapp.core.persist.util.JtaPersistenceUnitPostProcessor"> <property name="jtaDataSource" ref="myappPersistTestJdbcDataSource" /> </bean> </property> <property name="jpaProperties"> <props> <prop key="hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</prop> <prop key="hibernate.transaction.manager_lookup_class">com.atomikos.icatch.jta.hibernate3.TransactionManagerLookup</prop> </props> </property> <property name="jpaVendorAdapter"> <bean class="org.springframework.orm.jpa.vendor.HibernateJpaVendorAdapter"> <property name="showSql" value="true" /> <!-- The following use the PropertyPlaceholderConfigurer but it doesn't work in Eclipse --> <property name="database" value="$DS{hibernate.database}" /> <property name="databasePlatform" value="$DS{hibernate.dialect}" /> I am not sure, but I think the issue might be that I am not creating the entity manager correctly with the plain vanilla createEntityManager() call rather than passing in a map of properties. I say this because when Spring's LocalContainerEntityManagerFactoryBean proxy's the call to Hibernate's createEntityManager() all of the Spring configured options are missing. That is, there is no Map argument to the createEntityManager() call. Perhaps it is another problem entirely however....not sure!

  Read the article

• How can I inject Javascript (including Prototype.js) in other sites without cluttering the global na

  - by Daniel Magliola

  I'm currently on a project that is a big site that uses the Prototype library, and there is already a humongous amount of Javascript code. We're now working on a piece of code that will get "injected" into other people's sites (picture people adding a <script> tag in their sites) which will then run our code and add a bunch of DOM elements and functionality to their site. This will have new pieces of code, and will also reuse a lot of the code that we use on our main site. The problem I have is that it's of course not cool to just add a <script> that will include Prototype in people's pages. If we do that in a page that's already using ANY framework, we're guaranteed to screw everything up. jQuery gives us the option to "rename" the $ object, so it could handle this situation decently, except obviously for the fact that we're not using jQuery, so we'd have to migrate everything. Right now i'm contemplating a number of ugly choices, and I'm not sure what's best... Rewrite everything to use jQuery, with a renamed $ object everywhere. Creating a "new" Prototype library with only the subset we'd be using in "injected" code, and renaming $ to something else. Then again I'd have to adapt the parts of my code that would be shared somehow. Not using a library at all in injected code, to keep it as clean as possible, and rewriting the shared code to use no library at all. This would obviously degenerate into us creating our own frankenstein of a library, which is probably the worst case scenario ever. I'm wondering what you guys think I could do, and also whether there's some magic option that would solve all my problems... For example, do you think I could use something like Caja / Cajita to sandbox my own code and isolate it from the rest of the site, and have Prototype inside of there? Or am I completely missing the point with that? I also read once about a technique for bookmarklets, were you add your code like this: (function() { /* your code */ })(); And then your code is all inside your anonymous function and you haven't touched the global namespace at all. Do you think I could make one file containing: (function() { /* Full Code of the Prototype file here */ /* All my code that will run in the "other" site */ InitializeStuff_CreateDOMElements_AttachEventHandlers(); })(); Would that work? Would it accomplish the objective of not cluttering the global namespace, and not killing the functionality on a site that uses jQuery, for example? Or is Prototype too complex somehow to isolate it like that? (NOTE: I think I know that that would create closures everywhere and that's slower, but I don't care too much about performance, my code is not doing anything that complex)

  Read the article

• System.Net.Dns.GetHostAddresses("")

  - by dbasnett

  Yesterday s**ked, and today ain't (sic) looking better. I have an application I have been working on and it can be slow to start when my ISP is down because of DNS. My ISP was down for 3 hours yesterday, so I didn't think much about this piece of code I had added, until I found that it is always slow to start. This code is supposed to return your IP address and my reading of the link suggests that should be immediate, but it isn't, at least on my machine. Oh, and yesterday before the internet went down, I upgraded (oymoron) to XP SP3, and have had other problems. So my questions / request: 1. Am I doing this right? 2. If you run this on your machine does it take 39 seconds to return your IP address? It does on mine. One other note, I did a packet capture and the first request did NOT go on the wire, but the second did, and was answered quickly. So the question is what happened in XP SP3 that I am missing, besides a brain. One last note. If I resolve a FQDN all is well. Public Class Form1 'http://msdn.microsoft.com/en-us/library/system.net.dns.gethostaddresses.aspx ' 'excerpt 'The GetHostAddresses method queries a DNS server 'for the IP addresses associated with a host name. ' 'If hostNameOrAddress is an IP address, this address 'is returned without querying the DNS server. ' 'When an empty string is passed as the host name, 'this method returns the IPv4 addresses of the local host Private Sub Button1_Click(ByVal sender As System.Object, _ ByVal e As System.EventArgs) Handles Button1.Click Dim stpw As New Stopwatch stpw.Reset() stpw.Start() 'originally Dns.GetHostEntry, but slow also Dim myIPs() As System.Net.IPAddress = System.Net.Dns.GetHostAddresses("") stpw.Stop() Debug.WriteLine("'" & stpw.Elapsed.TotalSeconds) If myIPs.Length > 0 Then Debug.WriteLine("'" & myIPs(0).ToString) 'debug '39.8990525 '192.168.1.2 stpw.Reset() stpw.Start() 'originally Dns.GetHostEntry, but slow also myIPs = System.Net.Dns.GetHostAddresses("www.vbforums.com") stpw.Stop() Debug.WriteLine("'" & stpw.Elapsed.TotalSeconds) If myIPs.Length > 0 Then Debug.WriteLine("'" & myIPs(0).ToString) 'debug '0.042212 '63.236.73.220 End Sub End Class

  Read the article

• Set maven to use archiva repositories WITHOUT using activeByDefault?

  - by Sam Levin

  I am very close to finally having a working setup with archiva and maven. The last thing that's really boggling me, is how to set up my internal and snapshot repositories - without using a profile which contains activeByDefault set to true. I am using a SUPER super pom - a company-wide pom which contains distributionManagement information for releases. I was thinking that I could specify the repositories in this pom, and configure the authentication settings in settings.xml? Can I use repositories tag without a profile? There should be no "profile" for my internal and snapshot repositories, as they will never change... What I'm trying to steer clear from, is using a "default" profile, which is active all the time. I hear activeByDefault is NOT a best practice and I don't intend to use it. With that said, how should I go about doing this? My internal repo is a mirror of the maven central repo, so I would like to lock down my developers to ONLY use our internal artifact server. Remember - I do NOT want a profile with activeByDefault set to true. I cannot stress this enough! Should I use Maven mirrors? Should I "add" additional repositories? If I take the repositories tag instead of the mirrors tag, will maven force builds to use ONLY my archiva settings, instead of the default maven central? Or is what I seek to accomplish able to be done using only the mirrors tag in maven? I know how to configure repo credentials when using repositories tag, but not with mirrors. How is this done? Is providing credentials for anything in mirrors tags the same as for anything in repositories tags? Am I missing something obvious? I've had it up to here with getting things up and running using maven. I know it will be worthwhile in the end, but it is surely causing me a ton of aggravation and resources seem to be sparse. Either that, or people are content using it however they please without regard to best-practices. Thank you

  Read the article

• How can I successfully perform hidden line removal after pass through FBO?

  - by Brett

  Hi All, I'm trying to perform hidden line removal using polygon offset fill. The code works perfectly if I render directly to the window buffer but fails to draw the lines when passed through a FBO as shown below The code I use to draw the objects void drawCubes (GLboolean removeHiddenLines) { glLineWidth(2.0); glPushMatrix(); camera.ApplyCameraTransform(); for(int i = 0; i < 50; i ++){ glPushMatrix(); cube[i].updatePerspective(); glPolygonMode(GL_FRONT_AND_BACK, GL_LINE); glColor3f(1.0,1.0,1.0); cube[i].draw(); glPolygonMode(GL_FRONT_AND_BACK, GL_FILL); if(removeHiddenLines){ glEnable(GL_POLYGON_OFFSET_FILL); glPolygonOffset(1.0, 1.0); glColor3f(1.0, 0.0, 0.0); //fill polygons for hidden line removal cube[i].draw(); glDisable(GL_POLYGON_OFFSET_FILL); } glPopMatrix(); } glPopMatrix(); } For this example, the first pass involves rendering to both the window buffer and a FBO. void firstPass() { glBindFramebufferEXT(GL_FRAMEBUFFER_EXT, 0); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glViewport(0, 0, fboWidth, fboHeight); glEnable(GL_DEPTH_TEST); glDisable(GL_TEXTURE_2D); drawParticleView(GL_TRUE); glDisable(GL_DEPTH_TEST); glBindFramebufferEXT(GL_FRAMEBUFFER_EXT, framebufferID[0]); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glViewport(0, 0, fboWidth, fboHeight); glEnable(GL_DEPTH_TEST); glDisable(GL_TEXTURE_2D); drawParticleView(GL_TRUE); glDisable(GL_DEPTH_TEST); } Second pass renders FBO back to window buffer. void secondPass() { glEnable(GL_TEXTURE_2D); glBindFramebufferEXT(GL_FRAMEBUFFER_EXT, 0); glBindTexture(GL_TEXTURE_2D, renderTextureID[0]); glViewport(fboWidth, 0, fboWidth, fboHeight); glMatrixMode(GL_PROJECTION); glLoadIdentity(); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); glBegin(GL_QUADS); glTexCoord2i(0, 0); glVertex2f(-1.0f, -1.0f); glTexCoord2i(1, 0); glVertex2f(1.0f, -1.0f); glTexCoord2i(1, 1); glVertex2f(1.0f, 1.0f); glTexCoord2i(0, 1); glVertex2f(-1.0f, 1.0f); glEnd(); glDisable(GL_TEXTURE_2D); } I don't understand why the two views wouldn't be the same? Am I missing something (obviously I am)? Thanks

  Read the article

• Html Agility Pack: DescendantsOrSelf() not returning HTML element

  - by Program.X

  I have some HTML, eg: <%@ Page Title="About Us" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeBehind="ContentManagedTargetPage.aspx.cs" Inherits="xxx.ContentManagedTargetPage" %> <%@ Register TagPrefix="CxCMS" Namespace="xxx.ContentManagement.ASPNET.UI" Assembly="xxx.ContentManagement.ASPNET" %> <asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent"> </asp:Content> <asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent"> <h2> Content Managed </h2> <p> Put content here. [<CxCMS:ContentManagedPlaceHolder Key="keyThingy" runat="server" />] </p> </asp:Content> And I want to find all the instances of the CxCMS:ContentManagedPlaceHolder element. I'm using HTML Agility Pack, which seems the best fit. However, despite looking at the [meagre] documentation, I can't get my code to work. I would expect the following to work: string searchForElement = "CxCMS:ContentManagedPlaceHolder"; IEnumerable<HtmlNode> contentPlaceHolderHtmlNodes = HtmlDocument.DocumentNode.Descendants(searchForElement); int count = contentPlaceHolderHtmlNodes.Count(); But I get nothing back. If I change to DescendantsOrSelf, I get the document node back, "#document" - which is incorrect: string searchForElement = "CxCMS:ContentManagedPlaceHolder"; IEnumerable<HtmlNode> contentPlaceHolderHtmlNodes = HtmlDocument.DocumentNode.DescendantsOrSelf(searchForElement); int count = contentPlaceHolderHtmlNodes.Count(); I also tried using LINQ: string searchForElement = "CxCMS:ContentManagedPlaceHolder"; IEnumerable<HtmlNode> contentPlaceHolderHtmlNodes = HtmlDocument.DocumentNode.DescendantsOrSelf().Where(q=>q.Name==searchForElement); int count = contentPlaceHolderHtmlNodes.Count(); As neither of these methods work, I moved onto using SelectNodes, instead: string searchForElement = "CxCMS:ContentManagedPlaceHolder"; string xPath="//"+searchForElement // "//CxCMS:ContentManagedPlaceHolder" var nodes= HtmlDocument.DocumentNode.SelectNodes(xPath); This just throws the exception: "Namespace Manager or XsltContext needed. This query has a prefix, variable, or user-defined function.". I can't find any way of adding namespace management to the HtmlDocument object. What am I missing, here? The DescendantsOrSelf() method works if using a "standard" HTML tag, such as "p", but not the one I have. Surely it should work? (It needs to!)

  Read the article

• weird behavior with acts_as_taggable_on

  - by macek

  For some reason, tags aren't showing up on a taggable object when an tagger is specified. testing the post class Post < ActiveRecord::Base acts_as_taggable_on :tags belongs_to :user end >> p = Post.first => #<Post id: 1, ...> >> p.is_taggable? => true >> p.tag_list = "foo, bar" => "foo, bar" >> p.save => true >> p.tags => [#<Tag id: 1, name: "foo">, #<Tag id: 2, name: "bar">] testing the user class User < ActiveRecord::Base acts_as_tagger has_many :posts end >> u = User.first => #<User id: 1, ...> >> u.is_tagger? => true >> u.tag(p, :with => "hello, world", :on => :tags) => true >> u.owned_tags => [#<Tag id: 3, name: "hello">, #<Tag id: 4, name: "world">] refresh the post >> p = Post.first => #<Post id: 1 ...> >> p.tags => [#<Tag id: 2, name: "bar">, #<Tag id: 1, name: "foo">] Where's the hello and world tags? Miraculously, if I modify the database directly to set tagger_id and tagger_type to NULL, the two missing tags will show up. I suspect there's something wrong with my User model? What gives?

  Read the article

• JbossESB jmsProvider cannot convert IBMMQ JMS Message JMSTextMessage

  - by Himanshu

  I am trying to integrate IBMMQ v6.0.2 with jbossESB. we have local Queue available on IBMMQ on one of our QA QUEUEMANAGER. I am able to listen to the QUEUE using JMSprovider of jboss ESB. As soon as a message (of type jms_text ) is dropped , esb listen to it and pick it up and before it hit the next action it throws following error message. ERROR [JmsComposer] Unsupported JMS message type: com.ibm.jms.JMSTextMessage Here are the steps I followed. jboss-service.mxl : Defined Connection Factory and QUEUE added jars ( com.ibm.mq.* ) to ${jbossesb}/server/${mynode}/lib Added jms lsinterner configuration on jboss-esb.xml Please guide me what I m missing here... Do I need to create custom MessagePlugin ? jboss-esb looks like this <jms-provider name="WSMQ" connection-factory="MQQueueConnectionFactory"> <jms-bus busid="queuestartGwChannel"> <jms-message-filter dest-type="QUEUE" dest-name="wsmq/SerivceOrderQueue" acknowledge-mode ="AUTO_ACKNOWLEDGE" /> </jms-bus> <jms-bus busid="queuestartEsbChannel"> <jms-message-filter dest-type="QUEUE" dest-name="wsmq/SerivceOrderQueue" /> </jms-bus> </jms-provider> jboss-service.xml looks like this <mbean code="jmx.service.wsmq.WSMQConnectionFactory" name="jmx.service.wsmq:service=MQQueueConnectionFactory"> <attribute name="JndiName">MQQueueConnectionFactory</attribute> <attribute name="JMSStyle">Queue</attribute> <attribute name="IsXA">false</attribute> <attribute name="QueueManagerName">SQAT0083</attribute> <attribute name="HostName">111.111.111.111</attribute> <attribute name="Port">1415</attribute> <attribute name="Channel">MYCO.SVRCONN</attribute> <attribute name="TransportType">CLIENT</attribute> <depends>jboss:service=Naming</depends> </mbean> <mbean code="jmx.service.wsmq.WSMQDestination" name="jmx.service.wsmq:service=WSMQRequestQueue"> <attribute name="JndiName">wsmq/SerivceOrderQueue</attribute> <attribute name="JMSStyle">Queue</attribute> <attribute name="QueueManagerName">SQAT0083</attribute> <attribute name="DestinationName">MYCO.SERVICEORDER.QA01.QL01</attribute> <attribute name="TargetClient">MQ</attribute> <depends>jboss:service=Naming</depends> </mbean> I am using jboss-eap-4.3. Really appreciate any help.

  Read the article

• A Python Wrapper for Shutterfly. Uploading an Image

  - by iJames

  I'm working on a Django app in which I want to order prints through Shutterfly's Open API: http://www.shutterfly.com/documentation/start.sfly So far I've been able to build the appropriate POSTs and GETs using the modules and suggested code snippets including httplib, httplib2, urllib, urllib2, mimetype, etc. But I'm stuck on the image uploading when placing an order (the ordering process is not the same process as uploading images to albums which I haven't tried.) From what I can tell, I'm supposed to basically create the multipart form data by concatenating the HTTP request body together with the binary data of the image. I take the strings: --myuniqueboundary1273149960.175.1 Content-Disposition: form-data; name="AuthenticationID" auniqueauthenticationid --myuniqueboundary1273149960.175.1 Content-Disposition: file; name="Image.Data"; filename="1_41_orig.jpg" Content-Type: image/jpeg and I put this data into it and end with the final boundary: ...\xb5|\xf88\x1dj\t@\xd9\'\x1f\xc6j\x88{\x8a\xc0\x18\x8eGaJG\x03\xe9J-\xd8\x96[\x91T\xc3\x0eTu\xf4\xaa\xa5Ty\x80\x01\x8c\x9f\xe9Z\xad\x8cg\xba# g\x18\xe2\xaa:\x829\x02\xb4["\x17Q\xe7\x801\xea?\xad7j\xfd\xa2\xdf\x81\xd2\x84D\xb6)\xa8\xcb\xc8O\\\x9a\xaf(\x1cqM\x98\x8d*\xb8\'h\xc8+\x8e:u\xaa\xf3*\x9b\x95\x05F8\xedN%\xcb\xe1B2\xa9~Tw\xedF\xc4\xfe\xe8\xfc\xa9\x983\xff\xd9... That ends up making it look like this (when I use print to debug): ... --myuniqueboundary1273149960.175.1 Content-Disposition: file; name="Image.Data"; filename="1_41_orig.jpg" Content-Type: image/jpeg ????q?ExifMM* ? ??(1?2?<??i?b?NIKON CORPORATIONNIKON D40HHQuickTime 7.62009:02:17 13:05:25Mac OS X 10.5.6%??????"?'??0220?????? ???? ? ?|_???,b???50??5 ... --myuniqueboundary1273149960.175.1-- My code for grabbing the binary data is pretty much this: filedata = open('myjpegfile.jpeg','rb').read() Which I then add to the rest of the body. I've see something like this code everywhere. I'm then using this to post the full request (with the headers too): response = urllib2.urlopen(request).read() This seems to me to be the standard way that form POSTS with files happens. Am I missing something here? At some point I might be able to make this into a library worth posting up on github, but this problem has stopped me cold in my tracks. Thanks for any insight!

  Read the article

< Previous Page | 474 475 476 477 478 479 480 481 482 483 484 485  | Next Page >