Search Results

Search found 24253 results on 971 pages for 'multiple monitor'.

Page 479/971 | < Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

• How to avoid Memory "Hard Fault/sec"

  - by Flavio Oliveira

  i've a problem on my windows 2008 server x64, and i cannot understand how can i solve it. i'm looking to Resource Monitor and see about 100 to 200 hard faults/sec. and generally the machine is slow. As i've readed a bit it is caused by a "memory Page" that is no longer available on physical memory and causes a io operations (disk) and it is a problem. The current hardware is a intel core2duo E8400 (3.0GHz) with 6GB RAM on a Windows Server Web 64-bit. Actually the machine have about 2GB Ram used what having 4Gb available to use, Why is the machine requires that high level of Disk operations? what can i do to increase the performance? Im experiencing a memory issues? what should be my starting point?

  Read the article

• Online voice chat: Why client-server model vs. peer-to-peer model?

  - by sstallings

  I am adding online voice chat to a Silverlight app. I've been reviewing current apps, services and SDKs found thru online searches and forums. I'm finding that the majority of these implement a client-server (C/S) model and I'm trying to understand why that model versus a peer-to-peer (PTP) model. To me PTP would be preferable because going direct between peers would be more efficient (fewer IP hops and no processing along the way by a server computer) and no need for a server and its costs and dependencies. I found some products offer the ability to switch from PTP to C/S if the PTP proves insufficient. As I thought more about it, I could see that C/S could be better if there are more than two peers involved in a conversation, then the server (supposedly with more bandwidth) could do a better job of relaying each peers outgoing traffic to the multiple other peers. In C/S many-to-many voice chatting, each peer's upstream broadband (which is where the bottleneck inherently is) would only have to carry each item of voice traffic once, then the server would use its superior bandwidth to relay the message to the multiple other peers. But, in a situation with one-on-one voice chatting it seems that PTP would be best. A server would not reduce each of the two peer's bandwidth requirements and would only add unnecessary overhead, dependency and cost. In one-on-one voice chatting: Am I mistaken on anything above? Would peer-to-peer be best? Would a server provide anything of value that could not be provided by a client-only program? Is there anything else that I should be taking into consideration? And lastly, can you recommend any Silverlight PTP or C/S voice chat products? Thanks in advance for any info.

  Read the article

• Windows screen shots via command-line SSH session

  - by Geoff Fritz

  I've browsed the handful of "screen capture" queries here, but I was unable to find anything which addressed my specific need. I'm looking for a command-line tool that I can run via remote SSH connection (by way of the cygwin sshd daemon). There are several to choose from, but the few I've tried (ImageMagick, nircmd, and MiniCap) all result in a blank screen. I assume that this is due to the remotely logged in user not having a proper graphical console session running. The goal here is automate screen capture and retrieval of the main system console (what one would see if they were looking at the physical monitor) through the use of ssh script from a Unix host: ssh user@windowshost "screencap --output /tmp/console.jpg" scp user@windowshost:/tmp/console.jpg /some/destdir Note that these must be done on demand, so polling a remote directory that has snapshots dumped periodically will not work. Bonus points for programs that are open source and have a portable install (so I don't need to RDP/VNC into the machine to run a graphical installer).

  Read the article

• application monitoring tools

  - by Shachar

  we're an ISV about to deploy our SaaS application over the internet to our end users, and are currently looking for an application monitoring solution. In addition to monitoring the usual OS-level suspects (I/O, disk space, logs, CPU, RAM, swapping, etc.), we're also looking to monitor, alert and report on internal application events, conditions, and counters (think queue size for internal service, or latency of a service we're getting from a third party via custom APIs). We're started looking at Nagios, Zenoss, etc., but found out those do only low-level stuff, and are currently looking at MOM and ManageEngine. Still, they are far from being an custom app monitoring tool. So - do you have anything to suggest?

  Read the article

• What was your most expensive computer rig?

  - by AlbertoPL

  I'm curious as to how much people are willing to spend on a typical computer. My most expensive machine is a gaming rig complete with an ATI Radeon HD4850, Wolfdale 3.0 GHZ Intel Core 2 Duo, 500 Gb hard drive, Antec 900 computer case, the works. I also have a 2-monitor set up. I'd have to say this thing has cost me a little more than a grand at this point, and I'd put the total value of the components at roughly $1300. So, how far have you gone with your computer rigs and has it been worth it?

  Read the article

• Calculate shortest path through a grocery store

  - by Bart

  Hi, I'm trying to find a way to find the shortest path through a grocery store, visiting a list of locations (shopping list). The path should start at a specified startposition and can end at multiple endpositions (there are multiple checkout counters). Also, I have some predefined constraints on the path, such as "item x on the shopping list needs to be the last, second last, or third last item on the path". There is a function that will return true or false for a given path. Finally, this needs to be calculated with limited cpu power (on a smartphone) and within a second or so. If this isn't possible, then an approximation to the optimal path is also ok. Is this possible? So far I think I need to start by calculating the distance between every item on the list using something like A* or Dijkstra's. After that, should I treat it like the travelling salesman problem? Because in my problem there is a specified startnode, specified endnodes, and some constraints, which are not in the travelling salesman problem. Any help would be appreciated :)

  Read the article

• interesting uses for a headless host running Ubuntu.

  - by Manuel

  Hey! So, I have configured a pc with no monitor, keyboard or mouse running Ubuntu. I use it as a ssh server, file backup, web server, etc. Though, it seems as if I could use it for sooo much more. The problem is I can't think of many more uses. What interesting uses of a headless host have you heard of? Is there a cool trick you want to share? Thanks! Manuel

  Read the article

• How to set SQL_BIG_SELECTS = 1 from VB(legacy ASP) with ADODB environment?

  - by conecon

  I encountered The SELECT would examine more than MAX_JOIN_SIZE rows; check your WHERE and use SET SQL_BIG_SELECTS=1 or SET SQL_MAX_JOIN_SIZE=# if the SELECT is okay error with my ASP code. ASP code has server side ADODB connection with MySQL and connection seems not be able to execute multiple query. How to implement SQL_BIG_SELECTS = 1 in my code? Set obj_db = Server.CreateObject("ADODB.Connection") Session("ConnectionString") = "dsn=dsn1016189_mysql;uid=apns;pwd=mypassword;DATABASE=mydb;APP=ASP Script;STMT=SET CHARACTER SET SJIS" obj_db.Open Session("ConnectionString") Set obj_ret = Server.CreateObject("ADODB.Recordset") obj_ret.CursorLocation = 3 and executing SQL... SQL_BIG_SELECTS = 1; SELECT pu.login_id, pu.p_login_id, pu.first_name, pu.last_name, pu.sex, pu.is_admin, pu.attendance, pu.invited, pu.reason, qaa1.answer AS qaa1_answer, COUNT(pu2.p_login_id) AS companion FROM party_user pu LEFT OUTER JOIN party_user pu2 ON pu2.p_login_id = pu.login_id LEFT OUTER JOIN qa_answer qaa1 ON qaa1.login_id = pu.login_id AND qaa1.party_id = pu.party_id AND qaa1.sort_num = '1' WHERE pu.party_id = '92' AND pu.p_login_id = '' GROUP BY pu.login_id, pu.p_login_id, pu.first_name, pu.last_name, pu.sex, pu.is_admin, pu.attendance, pu.reason, qaa1.answer, pu.invited ORDER BY pu.login_id ASC; I can't execute multiple query and above query become error. You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'SELECT pu.login_id, pu.p_login_id, pu.first_name, pu.last_name, pu.sex, pu.is_ad' at line 1

  Read the article

• How can I stop my laptop display from flickering when I connect my TV?

  - by Lord Torgamus

  I have a laptop with an HDMI output port running Vista, and an HDTV with HDMI input ports. The laptop is set to extend its desktop onto a second monitor. When I connect the computer to the TV with an HDMI cable, my laptop screen usually flickers rapidly. Most of the time it lasts for about 30 seconds, but sometimes it lasts for several minutes and once in a while it doesn't happen at all. It wouldn't be so bad except that the cursor moves back to the center of the laptop screen with each flicker, so I can't really do anything until the machine decides it's ready to calm down. I haven't been able to find any pattern at all for the causes or duration of the flickering. It doesn't seem to matter what programs the laptop is running when I connect it to the TV, whether I enable the extended display before or after I connect the TV or which HDMI port/cable I use. What could be causing this, and how can I make it go away?

  Read the article

• Thomson TG585v7 router - promiscuous mode

  - by Nikita

  I have a TG585v7 as a router with several machines plugged into it. In the default setup, the packets are only delivered to the specific machine but I want to be able to setup to monitor all network traffic on one of the machines, i.e. I need those packets to be picked up when my ethernet card is in promiscuous mode. Is this possible? Guide here has this "mcastpromisc Make the IP interface multicast promiscuous. OPTIONAL", is this what I am looking for? Does it mean I need to manually add all my machines by their MAC addresses to be able to receive packets destined for them? Or am I out of luck and I need to get a better router?

  Read the article

• Can a Mini DisplayPort to HDMI cable support resolutions above 1920x1200?

  - by cnst

  Is it theoretically possible for a cheapo Mini DisplayPort to HDMI cable or adapter to support resolutions above 1920 × 1200, e.g. 2560 × 1440 (QHD)? Or is it always electrically-equivalent to a single-link DVI, and such resolutions above 1920×1200 are out of the question? From empirical evidence, I've tried out some rather expensive brand-name adapter from a local Apple dealer that was marked as HDMI 1.3 compliant with my mid-2013 MacBook Air (5000) and also with X230 (4000), and a QHD monitor, but was only getting a maximum of FHD resulution through such an arrangement.

  Read the article

• monitoring nfs with monit

  - by Josh Nankin

  I'd like to monitor NFS mounts and the NFS server process using Monit. On the server, I'd need a PID file, but I can't seem to find a way of getting that created with existing configuration files. Is there a way to do this, or has anyone monitored the server in a different way (checking if port 53 is active, etc). On clients, I was thinking of making Monit simply look for a specific file in an NFS mount, and if it's accessible, all is well. Problem is, if the NFS server does go down, file requests usually hang (perhaps even indefinitely, not sure). How would one get around this issue with monit? Any configuration examples would be greatly appreciated!

  Read the article

• SNMPD - passing values in a trap

  - by ethrbunny

  Im trying to create an SNMP setup to monitor 500-1K machines. Each will be joined to the SNMPTRAPD server via a VPN. When the client system sends its messages, it's sending its internal address instead of the VPN address even though the 'trapsync' command is using the VPN. This will be a problem as many of these system will have DHCP addresses based on location so there will be overlap. What I'd like to figure out is how to pass extra values with the trap so I can identify which system a given trap comes from.

  Read the article

• Need Recommendations: Network Software and Hardware Setup for small firm

  - by Rogue

  Will be starting a small graphics design firm soon, with 20 employees. Therefore need software to manage the network. Have bought a bulk license of Windows 7. I have a spare computer which can act as a server if necessary, but its an ancient Dell machine (Pentium-III). If required I would purchase an extra machine, but would like to avoid unnecessary costs at start up. Following are the main functions that I would like to perform: Need to monitor\control network traffic and internet usage, restrict access to certain websites Alerts when access to certain software's, and when trying to tamper with privileges Ability to view desktops of any computer at any given time Limit access to certain hardware like USB ports,etc Limit access to folders on the computer Log/Report of all actions including keystrokes performed on any computer Local Network chat and talk client Collaboration and Work logs Any Software available to do all of the above and also any additional hardware required besides network switches, network card's and CAT5e cables. Any other recommendations besides the above mentioned hardware setup

  Read the article

• How to open embedded Visio files with only Visio Viewer?

  - by Christopher Galpin

  For some bizarre reason Visio Viewer seems incapable of opening vsd files when they're embedded within a (2010) Excel document: However if I open the Excel document with 7-zip, browse to xl\embeddings, extract oleObject1.bin and rename it to a .vsd file extension it opens perfectly fine with Visio Viewer in Internet Explorer. Since this opens fine on a computer with the full Visio installed, my guess is it's trying to launch Visio rather than IE. Is there something I can do to fix this? I've been scanning with Process Monitor and searching with RegScanner comparing a Visio-installed system to a VisioViewer-installed system and there doesn't actually seem to be any sort of registry value giving direction here... maybe it's just the nature of OLE. (If it can't be fixed I'm okay with converting the extracted one to a .png or so to replace the embedded object, but the "solutions" I've found for vsd to image conversion are very poor or non-working, i.e. buggy code, code with Visio dependencies, or online services.)

  Read the article

• Extracting table rows with a particular attribute from an HTML File, using HTMLAgilityPack

  - by Soham

  Consider this html snippet: <tr> <td valign=top class="tim_new"><a href="/stocks/company_info/pricechart.php?sc_did=MI42" class="tim_new">3M India</a></td> <td class="tim_new" valign=top><a href='/stocks/marketstats/indcomp.php?optex=NSE&indcode=Diversified' class=tim>Diversified</a></td> <td class="tim_new" align=right valign=top>2,487.25</td> <td class="tim_new" align=right valign=top><font color=#16a903>187.25</font></td> <td class="tim_new" align=right valign=top><font color=#16a903>8.14</font></td> <td class="tim_new" align=right valign=top>2,801.90</td> <td class="tim_new" align=right valign=top>0.06</td> </tr> Realize these three things: The HTML file from which this snippet has been taken, contains multiple number of HTML tables. The table from which this snippet has been extracted doesnt contain only rows of the shown format, but also of other formats like this, for example: <tr><td colspan=7><img src="http://img1.moneycontrol.com/images/blank.gif"height="5"></td></tr>` This same table contains multiple rows of the format which I need to extract. So given this scenario, is it possible to run a code, which extracts, the link with the class name = "tim_new"? Help Appreciated, Soham

  Read the article

• A PDF viewer for large margins in fullscreen

  - by jmn

  I am looking for a way to pleasantly read PDF files on my widescreen (22" 1680x1050) monitor. My problem with all pdf the PDF-viewer applications I have tried is that they do not handle wide and high margins well. If I go to fullscreen mode in my viewer and zoom in so that the extra margins are cropped, I can view the pages nicely, the annoyance however is that I have to reposition the pages every time I navigate to another page. I am sure there must be a way to make a PDF viewer that can solve this problem and perhaps there is one you know of? I am aware of something called PDF Reflow in Acrobat Reader but that only works with certain specific (tagged) files. I want a PDF viewer with a smarter zoom/next page function or an automatic margin-crop function. Is there such a thing?

  Read the article

• Holding value in collection

  - by Amit Ranjan

  I have a application which is on timesheet. I have total of 54 columns out of which 10 columns are visible rest invisible. First 3 columns are Project, MileStone and Classes. Rest are Sun- Sat work hrs. Now I have a column named 'taskid' as SunTaskID,MonTaskID and so on till SatTaskID for holding each days taskid. Now on the selection of SunHrs (Sunday's Work Hrs), i retrieve that days taskid and on the basis of task id i retrieve attachments which is displayed under a listbox. Now the problem is that since a day can have multiple attachments and a user can attach multiple attachments at time. He can enter values from grid to. Grid cells are editable. I am using BindingList(of TaskClass) in VB.Net for binding grid. I have total 54 properties n my task class. So i want to what property do i need to hod each days attachment and in what way. Earlier I tried Dictionary. But i was not aware of its usage as a property so i gave. Then prepared a separate class for attachment but, it was difficult to synchronize the existing attachments with taskid...

  Read the article

• Comment reply procedure using jquery and php?

  - by Prashant

  I have Commenting system in my app. For a single video entry anyone can post a comment and someone else can post reply to that comment and replies, cannot have thier further reples, similar to StackOverflow is doing (1 Answer, and thier 1 or more replies). I want the similar functionality what SO has, Let's I have the following HTML <div class="comment" id="comment-908"> First comment </div> <div class="reply"> <div id="reply-909> reply 1 </div> <div id="reply-910> reply 2 </div> <div id="reply-911> reply 3 </div> </div> <form id="reply-form"> <textarea id="replycomment" name="replycomment"></textarea> <input type="submit" name="submit-reply" value="add reply" /> </form> Now above HTML is a sample which I have created, When someone will click on "add reply" button then I am using jquery to post there reply. Now I want to know that there will be multiple comment and multiple add reply forms. So who clicks on which button and for which comment someone wants to post a reply, how will i know that? The above HTML is not in correct way, please suggest me the correct HTML flow which I can use and how to work with jquery? now I want to know when soe

  Read the article

• Why do SNMP agents need MIB files?

  - by user1495181

  After reading up on SNMP and some of the questions help here I think understand the agent role as a SNMP service to device (Like SQL, it is an API to storage). When you execute a SQL query the SQL engine does all the work and returns the result - You don't need to be aware of how the storage and where the storage is done. But MIBs are not actual storage , so what is the role of my agent? if the agent only register the MIB like i follow in this tutorial, is it not used as handler at all? Say that I want monitor my application's pending request queue, so I want an agent that all SNMP request for application_pending_request will be fired for it and it will return the queue depth. Why do I need to have an actual MIB when all I need to poll my application queue in order to get result?

  Read the article

• SQL ORACLE - Datatable in where clause

  - by Gage

  Currently I have a sql call returning a dataset from a MSSQL database and I want to take a column from that data and return ID's based off that column from the ORACLE database. I can do this one at a time but that requires multiple calls, I am wondering if this can be done with one call. String sql=String.Format(@"Select DIST_NO FROM DISTRICT WHERE DIST_DESC = '{0}'", row.Table.Rows[0]["Op_Centre"].ToString()); Above is the string I am using to return one ID at a time. I know the {0} can be used to format your value into the string and maybe there is a way to do that with a datatable. Also to use multiple values in the where clause it would be: String sql=String.Format(@"Select DIST_NO FROM DISTRICT WHERE DIST_DESC in ('{0}')", row.Table.Rows[0] ["Op_Centre"].ToString()); Although I realize all of this can be done I am wondering if theres an easy way to add it all to the sql string in one call. As I am writing this I am realizing I could break the string into sections then just add every row value to the SQL string within the "WHERE DIST_DESC IN (" clause... I am still curious to see if there is another way though, and because someone else may come across this problem I will post a solution if I develop one. Thanks in advance.

  Read the article

• Getting out of the Helpdesk. Getting into the system administration.

  - by eric.s

  Today I found out that the job which would have been a promotion for me went to an outside candidate. The position is for a systems admin on our LAN team. I have been working on the helpdesk here for almost two years with another two years experience working it prior. While we are the first tier support we also work in AD, monitor and update certain servers and set up and deploy Windows/Mac images for those we support. What I am looking for here is what can I do to better myself to inside/outside places to move up this ladder? I take what I can from my job - working on projects that I can learn from - but what projects should I be volunteering for? What can I do for myself outside to make me a more viable candidate for a systems admin?

  Read the article

• javascript function not working in IE 7

  - by JPro

  Hi, Can anyone please tell me how do I make this script run in IE 7? When I run this , nothing happens. <html> <body> <script language="JavaScript"> function moveSelectedOption() { // Fetch references to the <select> elements. var origin = document.getElementById('origin_select'); var target = document.getElementById('target_select'); // Fetch the selected option and clone it. var option = origin.options[origin.selectedIndex]; var copy = option.cloneNode(true); // Add the clone to the target element. target.add(copy, null); } </script> <select id="origin_select" multiple> <option value="A">A</option> <option value="B">B</option> <option value="C">C</option> </select> <select id="target_select" multiple> <option value="C1">C1</option> </select> <button onclick="moveSelectedOption()">Add</button> </body> </html>

  Read the article

• help with Firefox extension

  - by Johnny Grass

  I'm writing a Firefox extension that creates a socket server which will output the active tab's URL when a client makes a connection to it. I have the following code in my javascript file: var serverSocket; function startServer() { var listener = { onSocketAccepted : function(socket, transport) { try { var outputString = gBrowser.currentURI.spec + "\n"; var stream = transport.openOutputStream(0,0,0); stream.write(outputString,outputString.length); stream.close(); } catch(ex2){ dump("::"+ex2); } }, onStopListening : function(socket, status){} }; try { serverSocket = Components.classes["@mozilla.org/network/server-socket;1"] .createInstance(Components.interfaces.nsIServerSocket); serverSocket.init(7055,true,-1); serverSocket.asyncListen(listener); } catch(ex){ dump(ex); } document.getElementById("status").value = "Started"; } startServer(); As it is, it works for multiple tabs in a single window. If I open multiple windows, it ignores the additional windows. I think it is creating a server socket for each window, but since they are using the same port, the additional sockets fail to initialize. I need it to create a server socket when the browser launches and continue running when I close the windows (Mac OS X). As it is, when I close a window but Firefox remains running, the socket closes and I have to restart firefox to get it up an running. How do I go about that?

  Read the article

< Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >