Search Results

Search found 31206 results on 1249 pages for 'version detection'.

Page 479/1249 | < Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >

• Project Euler problem 214, How can i make it more efficient?

  - by Once

  I am becoming more and more addicted to the Project Euler problems. However since one week I am stuck with the #214. Here is a short version of the problem: PHI() is Euler's totient function, i.e. for any given integer n, PHI(n)=numbers of k<=n for which gcd(k,n)=1. We can iterate PHI() to create a chain. For example starting from 18: PHI(18)=6 = PHI(6)=2 = PHI(2)=1. So starting from 18 we get a chain of length 4 (18,6,2,1) The problem is to calculate the sum of all primes less than 40e6 which generate a chain of length 25. I built a function that calculates the chain length of any number and I tested it for small values: it works well and fast. sum of all primes<=20 which generate a chain of length 4: 12 sum of all primes<=1000 which generate a chain of length 10: 39383 Unfortunately my algorithm doesn't scale well. When I apply it to the problem, it takes several hours to calculate... so I stop it because the Project Euler problems must be solved in less than one minute. I thought that my prime detection function might be slow so I fed the program with a list of primes <40e6 to avoid the primality test... The code runs now a little bit faster, but there is still no way to get a solution in less than a few hours (and I don't want this). So is there any "magic trick" that I am missing here ? I really don't understand how to be more efficient on this one... I am not asking for the solution, because fighting with optimization is all the fun of Project Euler. However, any small hint that could put me on the right track would be welcome. Thanks !

  Read the article

• Images logging as 404s with Zend Framework

  - by azz0r

  Hello, Due to Zend rewriting URL's to module/controller/action, its reporting that images are coming through as a 404. Here is the error: [_requestUri:protected] => /images/Movie/124/thumb/main.png [_baseUrl:protected] => [_basePath:protected] => [_pathInfo:protected] => /images/Movie/124/thumb/main.png [_params:protected] => Array ( [controller] => images [action] => Movie [124] => thumb [module] => default ) [_rawBody:protected] => [_aliases:protected] => Array ( ) [_dispatched:protected] => 1 [_module:protected] => default [_moduleKey:protected] => module [_controller:protected] => images [_controllerKey:protected] => controller [_action:protected] => Movie [_actionKey:protected] => action Here is my HTACCESS SetEnv APPLICATION_ENV development RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] I guess what I need todo is put some sort of image or /design detection so its not routing to index.php Ideas?

  Read the article

• Optimize website for touch devices

  - by gregers

  On a touch device like iPhone/iPad/Android it can be difficult to hit a small button with your finger. There is no cross-browser way to detect touch devices with CSS media queries that I know of. So I check if the browser has support for javascript touch events. Until now, other browsers haven't supported them, but the latest Google Chrome on dev channel enabled touch events (even for non touch devices). And I suspect other browser makers will follow, since laptops with touch screens are comming. This is the test I use: function isTouchDevice() { try { document.createEvent("TouchEvent"); return true; } catch (e) { return false; } } The problem is that this only tests if the browser has support for touch events, not the device. Does anyone know of The Correct[tm] way of giving touch devices better user experience? Other than sniffing user agent. Mozilla has a media query for touch devices. But I haven't seen anything like it in any other browser: https://developer.mozilla.org/En/CSS/Media_queries#-moz-touch-enabled Update: I want to avoid using a separate page/site for mobile/touch devices. The solution has to detect touch devices with object detection or similar from JavaScript, or include a custom touch-CSS without user agent sniffing! The main reason I asked, was to make sure it's not possible today, before I contact the css3 working group.

  Read the article

• Detect remote charset in php

  - by yallaa

  Hello, I would like to determine a remote page's encoding through detection of the Content-Type header tag <meta http-equiv="Content-Type" content="text/html; charset=XXXXX" /> if present. I retrieve the remote page and try to do a regex to find the required setting if present. I am still learning hence the problem below... Here is what I have: $EncStart = 'charset='; $EncEnd = '" \/\>'; preg_match( "/$EncStart(.*)$EncEnd/s", $RemoteContent, $RemoteEncoding ); echo = $RemoteEncoding[ 1 ]; The above does indeed echo the name of the encoding but it does not know where to stop so it prints out the rest of the line then most of the rest of the remote page in my test. Example: When testing a remote russian page it printed: windows-1251" / rest of page .... Which means that $EncStart was okay, but the $EncEnd part of the regex failed to stop the matching. This meta header usually ends in 3 different possibility after the name of the encoding. "> | "/> | " /> I do not know weather this is usable to satisfy the end of the maching and if yes how to escape it. I played with different ways of doing it but none worked. Thank you in advance for lending a hand.

  Read the article

• How can I find out if the MainActivity is being paused from my Java class?

  - by quinestor

  I am using motion sensor detection in my application. My design is this: a class gets the sensor services references from the main activity and then it implements SensorEventListener. That is, the MainActivity does not listen for sensor event changes: public void onCreate(Bundle savedInstanceState) { // ... code mSensorManager = (SensorManager) getSystemService(Context.SENSOR_SERVICE); mAccelerometer = mSensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER); // The following is my java class, it does not extends any android fragment/activty mShakeUtil = new ShakeUtil(mSensorManager,mAccelerometer,this); // ..more code.. } I can't redesign ShakeUtil so it is a fragment nor activity, unfortunately. Now to illustrate the problem consider: MainActivity is on its way to be destroyed/paused. I.e screen rotation ShakeUtil's onSensorChanged(SensorEvent event) gets called in the process.. One of the things that happen inside onSensorChanged is a dialog interaction, which gives the error: java.lang.IllegalStateException: Can not perform this action after onSaveInstanceState When the previous happens between MainActivity's onSaveInstanceState and onPause. I know this can be prevented if I successfully detect that MainActivity is being pause in ShakeUtil. How can I detect that MainActivity is being paused or onSaveInstanceState was called from ShakeUtil? Alternatively, how can I avoid this issue without making Shakeutil extend activity? So far I have tried with flag variables but that isn't good enough, I guess these are not atomic operations. I tried using Activity's isChangingConfigurations(), but I get an undocummented "NoSuchMethodFound" error.. I am unregistering the sensors by calling ShakeUtil when onPause in main ACtivity

  Read the article

• In Varnish, how can I read the Set-Cookie response header?

  - by Adam Friedman

  I am trying to detect if my application has set a cookie that holds an "alert message" for the user on the next page, where the Javascript displays it if detected. In my vcl_fetch(), I need to detect if the specific cookie value "alert_message" appears anywhere in the Set-Cookie header (presumably in the VCL variable beresp.http.Set-Cookie). If detected, then I do not want to cache that next page (since Varnish strips the Set-Cookie header by default, which would obliterate the alert message before it makes it back to the browser). So here is my simple test: if(beresp.http.Set-Cookie ~ "alert_message") { set req.http.no_cache = 1; } Strangely, it fails to evaluate to true. So I throw the variable into the Server header to see what it looks like: set beresp.http.Server = " MyApp Varnish implementation - test reading set-cookie: "+beresp.http.Set-Cookie; But for some reason this only displays the FIRST Set-Cookie line in the response headers. Here are the relevant response headers: Server: MyApp Varnish implementation - test reading cookie: elstats_session=7d7279kjmsnkel31lre3s0vu24; expires=Wed, 10-Oct-2012 00:03:32 GMT; path=/; HttpOnly Set-Cookie:app_session=7d7279kjmsnkel31lre3s0vu24; expires=Wed, 10-Oct-2012 00:03:32 GMT; path=/; HttpOnly Set-Cookie:alert_message=Too+many+results.; expires=Tue, 09-Oct-2012 20:13:32 GMT; path=/; domain=.my.app.com Set-Cookie:alert_key=flash_error; expires=Tue, 09-Oct-2012 20:13:32 GMT; path=/; domain=.my.app.com Vary:Accept-Encoding How do I read and run string detection on ALL Set-Cookie header lines?

  Read the article

• Meta tag depending of selected language and title

  - by lena

  Hi, I'm aware about Google ignore most of the time, meta tag and use content. (This is not the point here) I'm working on an existing web site, not created by me. I need a quick solution, I guess with variables. The website construction: (no known template system) index.html which is presentation page with language selection index.php which embeding menu, content, footer several content pages that are embedded by index.php What I need to do only for those 2 pages welcome_en.html and welcome_fr.html (these pages are embedded so no header possible on these page) to have different page title (browser title) and different META tag. Any solution is welcome Thanks extra information Language detection on index.php: <?php $lang = $_GET['lang']; $page = $_GET['page']; if ($_GET['page'] == "" || !$_GET['page']) { $page = "welcome"; } if ($_GET['lang'] == "" || !$_GET['lang']) { $lang = "_fr"; } ? <td><img src="images/ban02<?php echo "$lang" ?>.jpg" width="531" height="60" <?php if ($_GET['lang'] == "_fr" || $_GET['lang'] == "" || !$_GET['lang']) { echo "alt='text'";} else if ($_GET['lang'] == "_en") {echo "alt='text'"; } ?>></td> for the embeded menu, footer ect like this one <?php include "menu.php"; ?> for the embedded content <?php //echo "$page$lang.html"; $lang = preg_replace('/[^a-z0-9_ ]/i', '', $_GET['lang']); $page = preg_replace('/[^a-z0-9_ ]/i', '', $_GET['page']); include $page . $lang . ".html"; ?>

  Read the article

• How to make use of Grails Dependencies in your IDE

  - by raoulsson

  Hi All, So I finally got my dependencies working with Grails. Now, how can my IDE, eg IntelliJ or Eclipse, take advantage of it? Or do I really have to manually manage what classes my IDE knows about at "development time"? If the BuildConfig.groovy script is setup right (see here), you will be able to code away with vi or your favorite editor without any troubles, then run grails compile which will resolve and download the dependencies into the Ivy cache and off you go... If, however, you are using an IDE like Eclipse or IntelliJ, you will need the dependencies at hand while coding. Obviously - as these animals will need them for the "real time" error detection/compilation process. Now, while it is certainly possible to code with all the classes shining up in bright red all over the place that are unknown to your IDE, it is certainly not much fun... The Maven support or whatever it is officially called lives happily with the pom file, no extra "jar directory" pointers needed, at least in IntelliJ. I would like to be able to do the same with Grails dependencies. Currently I am defining them in the BuildConfig.groovy and additionally I copy/paste the current jars around on my local disk and let the IDE point to it. Not very satisfactory, as I am working in a highly volatile project module environment with respect to code change. And this situation ports me directly into "jar hell", as my "develop- and build-dependencies" easily get out of sync and I have to manage manually, that is, with my brain... And my brain should be busy with other stuff... Thanks! Raoul P.S: I'm currently using Grails 1.2M4 and IntelliJ 92.105. But feel free to add answers on future versions of Grails and different, future IDEs, as the come in...

  Read the article

• C++ Memory Leak, Can't find where

  - by Nicholas

  I'm using Visual Studio 2008, Developing an OpenGL window. I've created several classes for creating a skeleton, one for joints, one for skin, one for a Body(which is a holder for several joints and skin) and one for reading a skel/skin file. Within each of my classes, I'm using pointers for most of my data, most of which are declared using = new int[XX]. I have a destructor for each Class that deletes the pointers, using delete[XX]. Within my GLUT display function I have it declaring a body, opening the files and drawing them, then deleting the body at the end of the display. But there's still a memory leak somewhere in the program. As Time goes on, it's memory usage just keep increasing, at a consistent rate, which I'm interpreting as something that's not getting deleted. I'm not sure if it's something in the glut display function that's just not deleting the Body class, or something else. I've followed the steps for memory leak detection in Visual Studio 2008 and it doesn't report any leak, but I'm not 100% sure if it's working right for me. I'm not fluent in C++, so there maybe something I'm overlooking, can anyone see it?

  Read the article

• check properties of two objects for changes

  - by k-hoffmann

  Hi, i have to develop a mechanism to check two object properties for changes. All properties which are needed to check are marked with an attribute. Atm i - read all properties from acutal object via linq - read the corresponding property from old object - fill an own object with the two properties (old and new value) In Code the call to the workerclass looks like this public void CreateHistoryMap(BaseEntity actual, BaseEntity old) { CreateHistoryMap(actualEntity, oldEntity) .ForEach(mapEntry => CreateHistoryEntry(mapEntry), mapEntry => IfChangesDetected(mapEntry)); } CreateHistoryMap builds up the HistoryMapEntry which contains the two properties. CreateHistoryEntry build up the object which is saved to database, the IfChangesDetected check the object for changes. I have to handle own special application types to generate history values to database (like concatinating list values and so on). My problem is now, that i have to read the values of the properties twice - for change detection - and for the concreate CreateHistoryEntry How can i eliminate this problem or how can i implement the change tracking scenario with the nice c# 3.5 features? Thanks a lot.

  Read the article

• C# getpixels() gets the correct value on xp and vista but is slightly off when used on windows 7

  - by user352288

  I have a C# program that works correctly on xp and vista but it needs to be used on windows 7, I have not been able to come up with a solution, it appears that getpixels just doesn't work right on windows 7. I am getting one of the RGB values because I am dealing with tiff grayscale images. System.Drawing.Bitmap image;// this is in a separate class image = new Bitmap(destination);// this is in the constructor Color t = image.GetPixel(j, i); // this is in a separate function int s = t.R when I print s, for example, image(0,0), it is supposed to be 220, it will be 221 I am doing edge detection on an image and I have to go through the image pixel by pixel, I have run the exact same program on XP,Vista,windows7 and windows 7 got different values. It wouldn't let me post images at all and only one link. The first image is the original image, the second is the correct image, also the one I get with XP and Vista, the final image is the image when running the same program in Windows 7. There is not much of a visible difference but it matters for what I am doing. Thanks for the help, it seems that I am having a hard time explaining my problem.

  Read the article

• Atmospheric scattering OpenGL 3.3

  - by user1419305

  Im currently trying to convert a shader by Sean O'Neil to version 330 so i can try it out in a application im writing. Im having some issues with deprecated functions, so i replaced them, but im almost completely new to glsl, so i probably did a mistake somewhere. Original shaders can be found here: http://www.gamedev.net/topic/592043-solved-trying-to-use-atmospheric-scattering-oneill-2004-but-get-black-sphere/ My horrible attempt at converting them: Vertex Shader: #version 330 core layout(location = 0) in vec3 vertexPosition_modelspace; //layout(location = 1) in vec2 vertexUV; layout(location = 2) in vec3 vertexNormal_modelspace; uniform vec3 v3CameraPos; uniform vec3 v3LightPos; uniform vec3 v3InvWavelength; uniform float fCameraHeight; uniform float fCameraHeight2; uniform float fOuterRadius; uniform float fOuterRadius2; uniform float fInnerRadius; uniform float fInnerRadius2; uniform float fKrESun; uniform float fKmESun; uniform float fKr4PI; uniform float fKm4PI; uniform float fScale; uniform float fScaleDepth; uniform float fScaleOverScaleDepth; // passing in matrixes for transformations uniform mat4 MVP; uniform mat4 V; uniform mat4 M; const int nSamples = 4; const float fSamples = 4.0; out vec3 v3Direction; out vec4 gg_FrontColor; out vec4 gg_FrontSecondaryColor; float scale(float fCos) { float x = 1.0 - fCos; return fScaleDepth * exp(-0.00287 + x*(0.459 + x*(3.83 + x*(-6.80 + x*5.25)))); } void main(void) { vec3 v3Pos = vertexPosition_modelspace; vec3 v3Ray = v3Pos - v3CameraPos; float fFar = length(v3Ray); v3Ray /= fFar; vec3 v3Start = v3CameraPos; float fHeight = length(v3Start); float fDepth = exp(fScaleOverScaleDepth * (fInnerRadius - fCameraHeight)); float fStartAngle = dot(v3Ray, v3Start) / fHeight; float fStartOffset = fDepth*scale(fStartAngle); float fSampleLength = fFar / fSamples; float fScaledLength = fSampleLength * fScale; vec3 v3SampleRay = v3Ray * fSampleLength; vec3 v3SamplePoint = v3Start + v3SampleRay * 0.5; vec3 v3FrontColor = vec3(0.0, 0.0, 0.0); for(int i=0; i<nSamples; i++) { float fHeight = length(v3SamplePoint); float fDepth = exp(fScaleOverScaleDepth * (fInnerRadius - fHeight)); float fLightAngle = dot(v3LightPos, v3SamplePoint) / fHeight; float fCameraAngle = dot(v3Ray, v3SamplePoint) / fHeight; float fScatter = (fStartOffset + fDepth*(scale(fLightAngle) - scale(fCameraAngle))); vec3 v3Attenuate = exp(-fScatter * (v3InvWavelength * fKr4PI + fKm4PI)); v3FrontColor += v3Attenuate * (fDepth * fScaledLength); v3SamplePoint += v3SampleRay; } gg_FrontSecondaryColor.rgb = v3FrontColor * fKmESun; gg_FrontColor.rgb = v3FrontColor * (v3InvWavelength * fKrESun); gl_Position = MVP * vec4(vertexPosition_modelspace,1); v3Direction = v3CameraPos - v3Pos; } Fragment Shader: #version 330 core uniform vec3 v3LightPos; uniform float g; uniform float g2; in vec3 v3Direction; out vec4 FragColor; in vec4 gg_FrontColor; in vec4 gg_FrontSecondaryColor; void main (void) { float fCos = dot(v3LightPos, v3Direction) / length(v3Direction); float fMiePhase = 1.5 * ((1.0 - g2) / (2.0 + g2)) * (1.0 + fCos*fCos) / pow(1.0 + g2 - 2.0*g*fCos, 1.5); FragColor = gg_FrontColor + fMiePhase * gg_FrontSecondaryColor; FragColor.a = FragColor.b; } I wrote a function to render a sphere, and im trying to render this shader onto a inverted version of it, the sphere works completely fine, with normals and all. My problem is that the sphere gets rendered all black, so the shader is not working. This is how i'm trying to render the atmosphere inside my main rendering loop. glUseProgram(programAtmosphere); glBindTexture(GL_TEXTURE_2D, 0); //###################### glUniform3f(v3CameraPos, getPlayerPos().x, getPlayerPos().y, getPlayerPos().z); glUniform3f(v3LightPos, lightPos.x / sqrt(lightPos.x * lightPos.x + lightPos.y * lightPos.y), lightPos.y / sqrt(lightPos.x * lightPos.x + lightPos.y * lightPos.y), 0); glUniform3f(v3InvWavelength, 1.0 / pow(0.650, 4.0), 1.0 / pow(0.570, 4.0), 1.0 / pow(0.475, 4.0)); glUniform1fARB(fCameraHeight, 1); glUniform1fARB(fCameraHeight2, 1); glUniform1fARB(fInnerRadius, 6350); glUniform1fARB(fInnerRadius2, 6350 * 6350); glUniform1fARB(fOuterRadius, 6450); glUniform1fARB(fOuterRadius2, 6450 * 6450); glUniform1fARB(fKrESun, 0.0025 * 20.0); glUniform1fARB(fKmESun, 0.0015 * 20.0); glUniform1fARB(fKr4PI, 0.0025 * 4.0 * 3.141592653); glUniform1fARB(fKm4PI, 0.0015 * 4.0 * 3.141592653); glUniform1fARB(fScale, 1.0 / (6450 - 6350)); glUniform1fARB(fScaleDepth, 0.25); glUniform1fARB(fScaleOverScaleDepth, 4.0 / (6450 - 6350)); glUniform1fARB(g, -0.85); glUniform1f(g2, -0.85 * -0.85); // vertices glEnableVertexAttribArray(0); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer[1]); glVertexAttribPointer( 0, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? 0, // stride (void*)0 // array buffer offset ); // normals glEnableVertexAttribArray(2); glBindBuffer(GL_ARRAY_BUFFER, normalbuffer[1]); glVertexAttribPointer( 2, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? 0, // stride (void*)0 // array buffer offset ); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, elementbuffer[1]); glUniformMatrix4fv(ModelMatrixAT, 1, GL_FALSE, &ModelMatrix[0][0]); glUniformMatrix4fv(ViewMatrixAT, 1, GL_FALSE, &ViewMatrix[0][0]); glUniformMatrix4fv(ModelViewPAT, 1, GL_FALSE, &MVP[0][0]); // Draw the triangles glDrawElements( GL_TRIANGLES, // mode cubeIndices[1], // count GL_UNSIGNED_SHORT, // type (void*)0 // element array buffer offset ); Any ideas?

  Read the article

• What happens when modifying Gemfile.lock directly?

  - by Mik378

  Since the second time of bundle install execution, dependencies are loaded from Gemfile.lock when Gemfile isn't changed. But I wonder how detection of changes is made between those two files. For instance, if I'm adding a new dependency directly into Gemfile.lock without adding it into Gemfile (as opposed to the best practice since Gemfile.lock is auto-generated from Gemfile), would a bundle install consider Gemfile as changed ? Indeed, does bundle install process compares the whole Gemfile and Gemfile.lock trees in order to detect changes? If it is, even if I'm adding a dependency directly to Gemfile.lock, Gemfile would be detected as changed (since different) and would re-erase Gemfile.lock (so losing the added dependency...) What is the process of bundle install since the launch for the second time ? To be more clear, my question is: Are changes based only from Gemfile ? That means bundler would keep a Gemfile snapshot of every bundle install execution number N and merely compares it to the bundle install execution N+1 ? Or none snapshot are created in bundler memory and bundler makes a comparison with Gemfile.lock each time to detect if Gemfile must be considered as changed.

  Read the article

• Has anyone ever had OpenCV work with Python 2.7 on MacOS 10.6?

  - by ?????

  I've been trying on and off for the past 6 months to get OpenCV to work with Python on MacOS. Every time there's a new release, I try again and fail. I've tried both 64-bit and 32-bit, and both the xcode gcc and gcc installed via macports. I just spend the past two days on it, hopeful that the latest OpenCV release, that appears to include Python support directly would work. It doesn't. I've also tried and failed to use this: http://code.google.com/p/pyopencv/ I've been using OpenCV with C++ or Microsoft C++/CLI for the past few years, but I'd love to use it with Python on a Mac because that is my primary development environment. I'd love to hear from anyone who's actually been able to get the opencv python examples to run under Mac OS 10.6, either 32 or 64-bit. My last attempt was to follow the instructions on this page http://recursive-design.com/blog/2010/12/14/face-detection-with-osx-and-python/ with a clean, fresh install of 10.6 on a 64-bit capable Mac. My PYTHONPATH is set, and I can see the cv library in it. But an "import cv" from python fails. Previously, the closest I've ever gotten (again, staring on a clean, fresh 10.6 install) was this: Python 2.7.1 (r271:86882M, Nov 30 2010, 10:35:34) [GCC 4.2.1 (Apple Inc. build 5664)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import cv Fatal Python error: Interpreter not initialized (version mismatch?) Abort trap thrilllap-2:~ swirsky$ I've seen a lot of folks answering similar questions here, but have never seen an definitive answer for it.

  Read the article

• Need advice on C++ coding pattern

  - by Kotti

  Hi! I have a working prototype of a game engine and right now I'm doing some refactoring. What I'm asking for is your opinion on usage of the following C++ coding patterns. I have implemented some trivial algorithms for collision detection and they are implemented the following way: Not shown here - class constructor is made private and using algorithms looks like Algorithm::HandleInnerCollision(...) struct Algorithm { // Private routines static bool is_inside(Point& p, Object& object) { // (...) } public: /** * Handle collision where the moving object should be always * located inside the static object * * @param MovingObject & mobject * @param const StaticObject & sobject * @return void * @see */ static void HandleInnerCollision(MovingObject& mobject, const StaticObject& sobject) { // (...) } So, my question is - somebody advised me to do it "the C++" way - so that all functions are wrapped in a namespace, but not in a class. Is there some good way to preserve privating if I will wrap them into a namespace as adviced? What I want to have is a simple interface and ability to call functions as Algorithm::HandleInnerCollision(...) while not polluting the namespace with other functions such as is_inside(...) Of, if you can advise any alternative design pattern for such kind of logics, I would really appreciate that...

  Read the article

• Detecting well behaved / well known bots

  - by Simon_Weaver

  I found this question very interesting : Programmatic Bot Detection I have a very similar question, but I'm not bothered about 'badly behaved bots'. I am tracking (in addition to google analytics) the following per visit : Entry URL Referer UserAgent Adwords (by means of query string) Whether or not the user made a purchase etc. The problem is that to calculate any kind of conversion rate I'm ending up with lots of 'bot' visits that are greatly skewing my results. I'd like to ignore as many as possible bot visits, but I want a solution that I don't need to monitor too closely, and that won't in itself be a performance hog and preferably still work if someone has javascript disabled. Are there good published lists of the top 100 bots or so? I did find a list at http://www.user-agents.org/ but that appears to contain hundreds if not thousands of bots. I don't want to check every referer against thousands of links. Here is the current googlebot UserAgent. How often does it change? Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)

  Read the article

• How can I define an irregular area of the screen and find the closest point to the mouse in that area?

  - by JonathonG

  I'm looking for a method to define an area of the screen that the mouse cannot leave. I have been directed by rob mayoff, the answerer of this question, that I can use a Quartz Event Tap to detect mouse events. This puts me part of the way to the solution to THIS question. I need to define an irregular area of the screen, not just a rectangle, that the mouse cannot leave. I have been researching this and the only idea I can come up with is using a bitmap to define the irregular area, as it will be very oddly shaped. However, I am open to solutions other than using a bitmap. Since this must be done on a Mac, I've determined that I will have to use objective C / Cocoa . I need to know how to define the area and, equally importantly, how to find the closest point in the area to the mouse (so that I can move the mouse to it if the mouse tries to move outside of the area). This is similar to what the restricted area will look like: [edit:] Okay, I've come up with part of the answer to this. If I can do a basic (light-weight) point collision detection on the image mask, I can use a simple algorithm to detect the closest point to the mouse on the black area of the image. I could do this by calculating distance between a pre-defined point (P) inside the black area of the image and the target mouse position (T), taking the midpoint (M), then checking if the midpoint is inside or outside of the shape (black or white, respectively). If M is inside the shape, then move the P to M, otherwise move T to the M, continuously recalculate this until the distance between T and P is 1 pixel or less, then move the mouse to the final calculated position. All of that being said, I still need some way to test the position of the mouse against that same position on the bitmap (assume the bitmap is the same resolution as the monitor), and check if that point is black or white. All of this needs to be done in the background, without this application actually having focus, or the bitmap being visible... is this possible?

  Read the article

• How to multi-thread this?

  - by WilliamKF

  I wish to have two threads. The first thread1 occasionally calls the following pseudo function: void waitForThread2() { if (thread2 is not idle) { return; } notifyThread2IamReady(); while (thread2IsExclusive) { } } The second thread2 is forever in the following pseudo loop: for (;;) { Notify thread1 I am idle. while (!thread1IsReady()) { } Notify thread1 I am exclusive. Do some work while thread1 is blocked. Notify thread1 I am busy. Do some work in parallel with thread1. } What is the best way to write this such that both thread1 and thread2 are kept as busy as possible on a machine with multiple cores. I would like to avoid long delays between notification in one thread and detection by the other. I tried using pthread condition variables but found the delay between thread2 doing 'notify thread1 I am busy' and the loop in waitForThread2() on thear2IsExclusive() can be up to almost one second delay. I then tried using a volatile sig_atomic_t shared variable to control the same, but something is going wrong, so I must not be doing it correctly.

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• Internet Explorer keeps asking for NTLM credentials in Intranet zone

  - by Tomalak

  Long text, sorry for that. I'm trying to be as specific as possible. I'm on Windows 7 and I experience a very frustrating Internet Explorer 8 behavior. I'm in a company LAN with some intranet servers and a proxy for connecting with the outside world. On sites that are clearly recognized as being "Local Intranet" (as indicated in the IE status bar) I keep getting "Windows Security" dialog boxes that ask me to log in. These pages are served off an IIS6 with "Integrated Windows Security" enabled, NTFS permits Everyone:Read on the files themselves. If I enter my Windows credentials, the page loads fine. However, the dialog boxes will be popping up the next time, regardless if I ticked "Remember my credentials" or not. (Credentials are stored in the "Credential Manager" but that does not make any difference as to how often these login boxes appear.) If I click "Cancel", one of two things can happen: Either the page loads with certain resources missing (images, styleheets, etc), or it does not load at all and I get HTTP 401.2 (Unauthorized: Logon Failed Due to Server Configuration). This depends on whether the logon box was triggered by the page itself, or a referenced resource. The behavior appears to be completely erratic, sometimes the pages load smoothly, sometimes one resource triggers a logon message, sometimes it does not. Even simply re-loading the page can result in changed behavior. I'm using WPAD as my proxy detection mechanism. All Intranet hosts do bypass the proxy in the PAC file. I've checked every IE setting I can think of, entered host patterns, individual host names, IP ranges in every thinkable configuration to the "Local Intranet" zone, ticked "Include all sites that bypass the proxy server", you name it. It boils down to "sometimes it just does not work", and slowly I'm losing my mind. ;-) I'm aware that this is related to IE not automatically passing my NTLM credentials to the webserver but asking me instead. Usually this should only happen for NTLM-secured sites that are not recognized as being in the "Intranet" zone. As explained, this is not the case here. Especially since half of a page can load perfectly and without interruption and some page's resources (coming from the same server!) trigger the login message. I've looked at http://support.microsoft.com/kb/303650, which gives the impression of describing the problem, but nothing there seems to work. And frankly, I'm not certain if "manually editing the registry" is the right solution for this kind of problem. I'm not the only person in the world with an IE/intranet/IIS configuration, after all. I'm at a loss, can somebody give me a hint?

  Read the article

• Mozilla Weave can't sync Firefox. What's wrong?

  - by Mehper C. Palavuzlar

  For the last few days, Mozilla Weave can't sync. Below is the activity log. Any ideas? 2010-05-02 20:47:15 Service.Main WARN Unknown error while downloading metadata record. Aborting sync. 2010-05-02 20:47:15 Service.Main CONFIG Starting backoff, next sync at:Sun May 02 2010 21:16:09 GMT+0300 (GTB Yaz Saati) 2010-05-02 20:47:15 Service.Main DEBUG Exception: aborting sync, remote setup failed No traceback available 2010-05-02 21:16:09 Service.Main DEBUG Idle timer created for sync, will sync after 5 seconds of inactivity. 2010-05-02 21:16:30 Net.Resource DEBUG GET success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/meta/global 2010-05-02 21:16:30 Service.Main DEBUG Weave Version: 1.2.3 Local Storage: 2 Remote Storage: 2 2010-05-02 21:26:50 Net.Resource DEBUG GET success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/info/collections 2010-05-02 21:26:50 Engine.Clients INFO 0 outgoing items pre-reconciliation 2010-05-02 21:26:50 Engine.Clients INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:26:50 Engine.Clients DEBUG Total (ms): sync 6, processIncoming 3, uploadOutgoing 0, syncStartup 3, syncFinish 0 2010-05-02 21:26:50 Engine.Bookmarks INFO 0 outgoing items pre-reconciliation 2010-05-02 21:26:50 Engine.Bookmarks INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:26:50 Engine.Bookmarks DEBUG Total (ms): sync 13, processIncoming 5, uploadOutgoing 0, syncStartup 3, syncFinish 3 2010-05-02 21:26:50 Engine.Forms INFO 1 outgoing items pre-reconciliation 2010-05-02 21:26:50 Engine.Forms INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:26:50 Engine.Forms INFO Uploading all of 1 records 2010-05-02 21:26:50 Collection DEBUG POST Length: 388 2010-05-02 21:27:06 Collection DEBUG POST success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/forms 2010-05-02 21:27:06 Engine.Forms DEBUG Total (ms): sync 15924, processIncoming 3, uploadOutgoing 15918, syncStartup 3, syncFinish 0, createRecord 1 2010-05-02 21:27:06 Engine.History INFO 55 outgoing items pre-reconciliation 2010-05-02 21:27:06 Engine.History INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:09 Engine.History INFO Uploading all of 55 records 2010-05-02 21:27:09 Collection DEBUG POST Length: 35337 2010-05-02 21:27:32 Collection DEBUG POST success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/history 2010-05-02 21:27:32 Engine.History DEBUG Total (ms): sync 25588, processIncoming 4, uploadOutgoing 25580, syncStartup 3, syncFinish 0, createRecord 2540 2010-05-02 21:27:32 Engine.Passwords INFO 0 outgoing items pre-reconciliation 2010-05-02 21:27:32 Engine.Passwords INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:32 Engine.Passwords DEBUG Total (ms): sync 8, processIncoming 4, uploadOutgoing 0, syncStartup 4, syncFinish 0 2010-05-02 21:27:32 Engine.Prefs INFO 0 outgoing items pre-reconciliation 2010-05-02 21:27:32 Engine.Prefs INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:32 Engine.Prefs DEBUG Total (ms): sync 8, processIncoming 3, uploadOutgoing 0, syncStartup 4, syncFinish 0 2010-05-02 21:27:32 Engine.Tabs INFO 1 outgoing items pre-reconciliation 2010-05-02 21:27:32 Engine.Tabs INFO Records: 0 applied, 0 reconciled, 0 left to fetch 2010-05-02 21:27:32 Engine.Tabs INFO Uploading all of 1 records 2010-05-02 21:27:32 Collection DEBUG POST Length: 393 2010-05-02 21:27:54 Collection DEBUG POST success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/tabs 2010-05-02 21:27:54 Engine.Tabs DEBUG Total (ms): sync 21943, processIncoming 3, uploadOutgoing 21936, syncStartup 3, syncFinish 0, createRecord 8 2010-05-02 21:27:54 Service.Main INFO Sync completed successfully 2010-05-02 22:27:53 Service.Main DEBUG Idle timer created for sync, will sync after 5 seconds of inactivity. 2010-05-02 22:28:14 Net.Resource DEBUG GET success 200 https://sj-weave03.services.mozilla.com/1.0/mehper/storage/meta/global 2010-05-02 22:28:14 Service.Main DEBUG Weave Version: 1.2.3 Local Storage: 2 Remote Storage: 2 2010-05-02 22:28:16 Net.Resource DEBUG GET fail 503 https://sj-weave03.services.mozilla.com/1.0/mehper/info/collections 2010-05-02 22:28:16 Service.Main DEBUG Exception: aborting sync, failed to get collections No traceback available 2010-05-02 23:28:15 Service.Main DEBUG Idle timer created for sync, will sync after 5 seconds of inactivity. 2010-05-03 00:26:42 Service.Main DEBUG Exception: Could not acquire lock No traceback available 2010-05-03 00:31:03 RecordMgr DEBUG Failed to import record: App. Quitting JS Stack trace: Res__request(...)@resource.js:208 < Res_get()@resource.js:271 < RecordMgr_import("https://sj-weave03.services.mozilla.com/1.0/mehper/storage/meta/global")@wbo.js:119 < WeaveSvc__remoteSetup()@service.js:824 < ()@service.js:1187 < WrappedNotify()@util.js:114 < WrappedLock()@util.js:86 < WrappedCatch()@util.js:65 < sync(false)@service.js:1146 < ([object Object])@service.js:414 < notify([object XPCWrappedNative_NoHelper])@util.js:629 2010-05-03 00:31:03 Service.Main DEBUG Weave Version: 1.2.3 Local Storage: 2 Remote Storage: 2010-05-03 00:31:03 Service.Main WARN Unknown error while downloading metadata record. Aborting sync. 2010-05-03 00:31:03 Service.Main DEBUG Exception: aborting sync, remote setup failed No traceback available 2010-05-03 17:26:25 Service.Main INFO Loading Weave 1.2.3 2010-05-03 17:26:25 Engine.Bookmarks DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Forms DEBUG Engine initialized 2010-05-03 17:26:25 Engine.History DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Passwords DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Prefs DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Tabs DEBUG Engine initialized 2010-05-03 17:26:25 Engine.Tabs DEBUG Resetting tabs last sync time 2010-05-03 17:26:25 Service.Main INFO Mozilla/5.0 (Windows; U; Windows NT 6.1; tr; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729) 2010-05-03 17:26:26 Service.Main DEBUG Caching URLs under storage user base: https://sj-weave03.services.mozilla.com/1.0/mehper/ 2010-05-03 17:26:30 Service.Main DEBUG Autoconnecting in 3 seconds 2010-05-03 17:26:36 Service.Main INFO Logging in user mehper 2010-05-03 17:45:46 Service.Main DEBUG Exception: Could not acquire lock No traceback available 2010-05-03 17:53:18 Service.Main DEBUG Exception: Could not acquire lock No traceback available

  Read the article

• Linux software raid fails to include one device for one RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the mdadm.conf file: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions? Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1

  Read the article

• Windows 7 is shutting down unexpectedly, according to the logs.

  - by dlamblin

  Here's a message from my eventvwr EventLog (Windows Logs System): The previous system shutdown at 11:51:15 AM on ?7/?29/?2009 was unexpected. This is funny because I was wondering why the system shut down while I was playing Civilizations IV full screen. Now I know. It was unexpected. Has anyone encountered and resolved this? A little background: I am running Windows 7 RC inside VMWare Fusion 2 (just updated a few months back) on a MacBook (Bitterly not Pro) aluminum-body. Windows 7 occasionally will shut down. This isn't a quick turn-off, it's a shutdown where all the programs are exited, the system waits until they quit (and Civ4 doesn't prompt me to save), it even installed Windows Updates before restarting. And yes it is restarting right after the shutdown. Because I run a game in full screen mode I do not notice any dialog with a countdown timer or anything like that that might be a warning. As I have iStat on my dashboard widgets I can see about 8 temperature monitors. I have seen the CPU get up to 74C before, but during the shutdown, though it seemed hot to the touch (always is), it read 61C for the CPU, 60C for heatsink A, 50C for heatsink B and in the 30s-40s for the enclosure and harddrives. As I type this now, the temps are actually higher, so I don't think the temperature caused it. I have at least six such events dating first from 5/17 which was a week after installing Windows 7. I did find one information level warning from USER32 in the system log that says: The process C:\Windows\system32\svchost.exe (DLAMBLIN-WIN7) has initiated the restart of computer DLAMBLIN-WIN7 on behalf of user NT AUTHORITY\SYSTEM for the following reason: Operating System: Recovery (Planned) Reason Code: 0x80020002 Shutdown Type: restart Comment: And another 15 minutes before that from Windows Update: Restart Required: To complete the installation of the following updates, the computer will be restarted within 15 minutes: - Cumulative Security Update for Internet Explorer 8 for Windows 7 Release Candidate for x64-based Systems (KB972260) Which I think kind of explains it. Though I don't know why restarting after an update would create an error event of "shutdown was unexpected", isn't that pretty odd? Now, how do I set it to never restart after an update unless I click something. Application of solution: As fretje reminded me, there's a couple of configurable settings for this, in windows 7 they're much in the same place as in Windows 2000 SP3 and XP SP1. Running gpedit.msc pops up a window that looks like: Windows 7 has changed the order and added a couple of newer options I've italicized: Do not display 'Install Updates and Shut Down' in Shut Down Windows dialog box Do not adjust default option to 'Install Updates and Shut Down' in Shut Down Windows dialog box Enabling Windows Power Management to automatically wake up the system to install scheduled updates Configure Automatic Updates Specify intranet Microsoft update service location Automatic Updates detection frequency Allow non-administrators to receive update notifications Turn on Software Notifications Allow Automatic Updates immediate installation Turn on recommended updates via Automatic Updates No auto-restart with logged-on users for scheduled Automatic Updates Re-prompt for restart with scheduled installations. Delay Restart for scheduled installations Reschedule Automatic Updates schedule

  Read the article

• Upon reboot, Linux software raid fails to include one device of a RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

  Read the article

• Ldap ssh authentication is super slow... any way to speed it up?

  - by Johnathon

  I am running OpenSUSE. Here is the output of ssh -vvv: OpenSSH_5.8p1, OpenSSL 1.0.0c 2 Dec 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to <ipaddress> [ipaddress] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug3: Incorrect RSA1 identifier debug3: Could not load "/root/.ssh/id_rsa" as a RSA1 public key debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_rsa-cert type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: identity file /root/.ssh/id_dsa-cert type -1 debug1: identity file /root/.ssh/id_ecdsa type -1 debug1: identity file /root/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1 debug1: match: OpenSSH_5.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "ipaddress" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 138/256 debug2: bits set: 529/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA cb:7f:ff:2e:65:28:f0:95:e6:8a:71:24:2a:67:02:2b debug3: load_hostkeys: loading entries for host "<ipaddress>" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug1: Host '<ipaddress>' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:4 debug2: bits set: 504/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/id_rsa (0xb789d5c8) debug2: key: /root/.ssh/id_dsa ((nil)) debug2: key: /root/.ssh/id_ecdsa ((nil)) debug1: Authentications that can continue: publickey,keyboard-interactive debug3: start over, passed a different list publickey,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /root/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply It hangs here for a good 30 seconds to a minute then debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /root/.ssh/id_dsa debug3: no such identity: /root/.ssh/id_dsa debug1: Trying private key: /root/.ssh/id_ecdsa debug3: no such identity: /root/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 I added PubkeyAuthentication no to the /etc/ssh/ssh_config and the /etc/ssh/sshd_config which makes it faster getting to the password prompt, but the password prompt still takes some time. Any way to fix that? Here is where the password hangs debug3: packet_send2: adding 32 (len 25 padlen 7 extra_pad 64) debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 0 debug3: packet_send2: adding 48 (len 10 padlen 6 extra_pad 64) debug1: Authentication succeeded (keyboard-interactive). Authenticated to ipaddress ([ipaddress]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. FIXED!!!!!!!!!!!!!! What is did... In the nsswitch_conf I had ldap included in the group and passwd which slows it down a lot. Thank you everybody for your input passwd: compat group: files hosts: files dns networks: files dns

  Read the article

< Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >