Search Results

Search found 12899 results on 516 pages for 'usb boot'.

Page 48/516 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• ifconfig can't see USB wireless

  - by Alex

  I have a wifi USB dongle which I have previously used on a Raspberry Pi (this it is what it is target at). I am trying to get it working on an Nvidia Jetson TK1, however I am having some problems. When I run ifconfig I can't see the wifi, only the ethernet and local loopback. iwconfig reports no wireless extensions on all devices. lsusb does find the device: Bus 002 Device 008: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter So I am not sure why the network tools can't see it. I have tried logging on with a GUI and opening up the network settings through Unity, but cannot see any wireless devices either. Not sure if this is useful, but output of lsmod: Module Size Used by nvhost_vi 2940 0 How can I enable wireless networking on this computer? Command line approach is preferred, but either is fine. UPDATE I don't have the kernel module rt2800usb anywhere on my system. If I do an apt-file search for rt2800usb it lists a number of packages of the pattern: linux-image-3.13.0-*. Perhaps installing one of these will do the trick, but can anyone tell me if its safe to do so?

  Read the article

• Usb stick too slow to benchmark?

  - by user85340

  I have a Core 2 Duo [email protected] with 3GB RAM. After some time using XUbuntu 10.10 on an 8GB stick I decided to switch to 12.04 and put it onto a 32GB stick (Transcend). I use an EXT4 with no journalling, noatime etc set. /tmp and /run is using tmpfs. And it is REALLY slow. MUCH slower than the old Xubuntu on the 8GB stick. Starting takes minutes, all applications "fade" because they respond too slow. I first thought that the NVidia graphics card is responsible for this, because there seem to be some known problems with that. Doing the adjustment (uncheck the sync checkbox) did not help. I believe the root cause is that the access to the USB stick is extremely slow. Running the read benchmark of the disk utility then brought the message "disk is too slow to benchmark"! BUT: When I do the same benchmark with the live CD I get around 20MB read performance and have a very responsive system! So how can I find out what is going one here?

  Read the article

• Fail to boot after installation onto ASUS PC 1015PX

  - by strugglingbadly

  My new ASUS 1015PX has the usual Windows on the SDA1 partition - 100Gb, followed by SDA2 - 15Gb - as the recovery partition for Windows, and SDA3 with 183Gb for drive D:\ for windows. ASUS uses SDA4 - 19Mb for it's own use. 11.10 on an USB will load Ubuntu on a try basis and it seems OK, but every time I attempt an install, Ubuntu quickly shuts down and the restart process begins. This repeats endlessly. I've tried 10.04 Netbook Remix but that will not boot at all with the machine reporting - unknown keyword in config file gfxboot vesamenu.c32: not a COM32R image. I've gone through the above about 6 times each with the same results. I have also tried the above with the partitioning unchanged, and using gparted, with SDA3 formatted to ext4, windows D:\ reduced to 8Gb providing a 175Gb unallocated space - all to no avail. Further information: During my attempt to load 11.10, I notice that on the page which offers 3 options of loading, the first in the list includes the statement 'install INSIDE windows...' whereas the on line help shows 'install ALONGSIDE windows...'. (my caps for emphasis) I have double checked that I am using the correct download - not the install within windows option.

  Read the article

• 12.04 doesn't boot anymore after a power failure

  - by Felix

  I'm a Windows user and I have no experience with Linux and Ubuntu. I installed Ubuntu 12.04 on my netbook (Asus 1215B) and everything works fine. Yesterday I ran the "update application" and updated over 120 "things" (I have no idea what exactly). After that I was asked to reboot, and I did. Ubuntu starts again and at the load screen with these 5 dots that normally begin to change color, it freezes. After 20 minutes I took out the battery to try another reboot (yes, not the the best idea), and now nothing happens. I boot from the HDD and I get an Error BOOTMGR is missing. I have important data on the hard drive. Is there an option to get this fixed? Or if not, to at least get the data from the hard drive? Ubuntu 12.04 64-bit Edit: it is ONLY Ubuntu on this Netbook, which uses the whole 500gb HDD as 1 Partition. Filesystem is NTFS. Whole Hardware seems okay. The USB drive which i used to instl the Os was formated in fat32

  Read the article

• Can't mount my USB Drive

  - by user996056

  ~> sudo mount /dev/sdb1 /media/Disk Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. I have a USB Hard Disk and Windows can't detect it. So I tried to open it up on Ubuntu using gparted. Gparted detects the NTFS partition, so everything seems to be fine (note, though, that the total size of the files in this disk is over 1 TB). I tried to mount it using: sudo mount /dev/sdb1 /media/Disk But I got: Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. Then, the process just sits there blinking. Any ideas on how to fix it? It's taking forever ( 10 minutes), should I wait or cancel it and do something else? Thank you in advance.

  Read the article

• How can I remove old kernels/install new ones when /boot is full?

  - by Marcel

  I know this question is asked many times before, however with me it is just a bit different I guess. # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 224G 5.2G 208G 3% / udev 1.9G 4.0K 1.9G 1% /dev tmpfs 777M 260K 777M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.9G 0 1.9G 0% /run/shm /dev/sda2 90M 88M 0 100% /boot /dev/sda6 1.9G 514M 1.3G 29% /tmp My boot partition is full. Current Kernel: # uname -r 3.2.0-35-generic All Kernels: # dpkg --list | grep linux-image ii linux-image-3.2.0-32-generic 3.2.0-32.51 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-34-generic 3.2.0-34.53 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-35-generic 3.2.0-35.55 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-37-generic 3.2.0-37.58 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-38-generic 3.2.0-38.60 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iU linux-image-generic 3.2.0.37.45 Generic Linux kernel image So I thought of removing the 3.2.0.32-generic kernel with: # sudo apt-get purge linux-image-3.2.0-32-generic Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.37.45) but 3.2.0.38.46 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). No success. When I try apt-get -f install it also fails: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: linux-headers-3.2.0-34 linux-headers-3.2.0-35 linux-headers-3.2.0-34-generic linux-headers-3.2.0-35-generic Use 'apt-get autoremove' to remove them. The following extra packages will be installed: linux-generic linux-image-generic The following packages will be upgraded: linux-generic linux-image-generic 2 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. 5 not fully installed or removed. Need to get 0 B/4,334 B of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up initramfs-tools (0.99ubuntu13.1) ... update-initramfs: deferring update (trigger activated) Setting up linux-image-3.2.0-37-generic (3.2.0-37.58) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-38-generic Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-37-generic /boot/vmlinuz-3.2.0-37-generic update-initramfs: Generating /boot/initrd.img-3.2.0-37-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-37-generic with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-37-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-37-generic (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-38-generic (3.2.0-38.60) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-37-generic Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-38-generic /boot/vmlinuz-3.2.0-38-generic update-initramfs: Generating /boot/initrd.img-3.2.0-38-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-38-generic with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-38-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-38-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.2.0-37-generic; however: Package linux-image-3.2.0-37-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.37.45); however: Package linux-image-generic is not configured yet. linux-generic depends on linux-headers-generic (= 3.2.0.37.45); however: Version of linux-headers-generic on system is 3.2.0.38.46. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already update-initramfs: Generating /boot/initrd.img-3.2.0-35-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-35-generic with 1. dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-37-generic linux-image-3.2.0-38-generic linux-image-generic linux-generic initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) Any help would really be appreciated. Update: I did: sudo rm /boot/*-3.2.0-32-generic /boot/*-3.2.0-34-generic After that the following problem with apt-get -f install: root@localhost:/# apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-generic The following packages will be upgraded: linux-generic 1 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. 1 not fully installed or removed. Need to get 0 B/1,722 B of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.37.45); however: Version of linux-image-generic on system is 3.2.0.38.46. linux-generic depends on linux-headers-generic (= 3.2.0.37.45); however: Version of linux-headers-generic on system is 3.2.0.38.46. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: linux-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Can I do full install on 4GB usb stick? [closed]

  - by Radek

  Possible Duplicate: How do I install Ubuntu to a USB key? Can I do full install of Ubuntu 11.10 on 4GB usb stick? Can I do so without downloading alternate version of Ubuntu? All I want is firefox wi-fi What I have live USB of Ubuntu 11.10 notebook without hdd internet access 4GB usb stick UPDATE after this question was closed The reason why I need full install is to install new programs (skype) and do upgrade (of flash player)

  Read the article

• Can I just download the Ubuntu ISO file to my USB and run it straight away with no installers?

  - by Paul Clarke

  I don't have access to running any installer at the minute so I knew that if running from the CD you just burn the iso file to the CD and your ready to go..but can I download this iso file to my USB and run it straight away when I change my bios to boot from USB?..or do I have to use the installer?..I can't use the installer for different reasons and I'm not really looking to install ubuntu just yet I just want to run it off my USB to try it out..so is it possible not to use the installer to put it on my USB? (I downloaded Ubuntu 12.10)

  Read the article

• How to boot Linux from a 16gb USB flash drive

  - by Chris Harris

  I'm trying to install Linux on a single partition of a USB flash drive that's larger than 4gb. The first place I went to is http://pendrivelinux.com. I can follow these instructions for installing Xubuntu 9.04 perfectly, which unfortunately break down when I try to scale it up beyond 4gb. There are several other tools to do this (unetbootin and usb-creator) which follow a very similar formula. I figured out that a big problem of mine was that all of these tools assume the USB drive is formatted in FAT32, which unfortunately cannot hold a single file larger than 4gb. This is unfortunate because I want to use just one partition, so that my persistance file, casper-rw, looks like one big partition to the OS once I've booted off of the USB drive. I then tried following a myriad of instructions involving formatting the drive as one large ext2 filesystem and using extlinux to create a single bootable ext2 file system. This doesn't work for me however, after about 20 attempts verifying and slightly tweaking the formula, I cannot seem to get a "good" bootable ext2 file system built. I'm not entirely sure what's going on, but it seems as though no matter how hard I try, I cannot get the ext2 file system to remain coherent after copying the Linux ISO contents over, copying the MBR, and executing extlinux to create the ext bootloader. Every time, after I follow these steps (in any order) and reboot, I get an unbootable USB drive. If I then mount the drive under Linux again, I see a mess of a file system (inodes have clearly been screwed up somewhere along the way). I suspected that the USB drive wasn't being fully flushed, so I tried using the "sync" and "unmount" commands before rebooting which didn't affect things at all. I guess I have several possible questions - but let's start with the obvious - is there something I'm missing to create a bootable ext2 USB flash drive that's large (e.g. 16gb)?

  Read the article

• Apple Service Diagnostic application on USB key?

  - by Matt 'Trouble' Esse

  I found the following in a text file, and I would like to use the Apple Service Diagnostic Application from a bootable USB key but I cannot find where to download it or set it up? Also is this free software or does it require a separate licence? It sounds like it would be a useful tool for diagnosing Mac problems. The Apple Service Diagnostic application is designed to run both EFI and Mac OS X tests from an external USB hard drive. Apple Service Diagnostic (EFI) runs low-level tests of the hardware directly and does not require Mac OS X, while Apple Service Diagnostic (OS) uses Mac OS X to run tests. Booting and Using the Apple Service Diagnostic Application - Before using Apple Service Diagnostic, disconnect any Ethernet network, USB, and audio cables. - With the USB hard drive containing ASD 3S123 plugged into a USB port, restart the computer and hold down the option key as the computer boots up into the Startup Manager. To run ASD (EFI) select the "ASD EFI 3S123" drive icon and press return or select it with a mouse click. To run ASD (OS) select the "ASD OS 3S123" drive icon and press return or select it with a mouse click. ASD (EFI) will load in 20-30 seconds; ASD (OS) will load in 2-3 minutes. - After running ASD (OS) or ASD (EFI), press the Restart button to restart the computer back into the normal startup volume, or hold down the option key to get back to the Startup Manager. ASD is no longer delivered as an image to be restored onto a DVD. ASD 3S117 and newer versions requires installation onto an external USB hard drive. For more information, please refer to the document "Installing ASD on a USB hard drive".

  Read the article

• Triple monitor setting in Linux with USB-HDMI adapter

  - by Oscar Carballal

  I'm trying to set up a triple monitor desktop at my office using Fedora 17, but it seems impossible, let me explain the setting: Laptop ASUS K53SD with 2 graphic cards, Intel and nVidia (Screen controled by Intel card) 24" Full HD monitor connected to the HDMI output (controlled by Intel card) 23" Full HD monitor connected to an USB-HDMI adapter (via framebuffer in /dev/fb2, apparently) VGA output (not used) controlled by nVidia card First of all, the USB-HDMI adapter works perfectly, it gives me a green screen (which means the communication is OK) and I can make it work if I set up a single monitor setting via framebuffer in Xorg. Here I leave the page where I got the instructions: http://plugable.com/2011/12/23/usb-graphics-and-linux Now I'm trying to set up the the two main monitors (laptop and 24") with the intel driver and the 23" with the framebuffer, but the most succesful configuration I get is the two main monitors working and the third disconnected. Do you have any idea what can I do to make this work? Here I leave my xRandr output and my Xorg conf: -> xrandr Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA2 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 60.0 The Xorg file: # Xorg configuration file for using a tri-head display Section "ServerLayout" Identifier "Layout0" Screen 0 "HDMI" 0 0 Screen 1 "USB" RightOf "HDMI" Option "Xinerama" "on" EndSection ########### MONITORS ################ Section "Monitor" Identifier "USB1" VendorName "Unknown" ModelName "Acer 24as" Option "DPMS" EndSection Section "Monitor" Identifier "HDMI1" VendorName "Unknown" ModelName "Acer 23SH" Option "DPMS" EndSection ########### DEVICES ################## Section "Device" Identifier "Device 0" Driver "intel" BoardName "GeForce" BusID "PCI:0:02:0" Screen 0 EndSection Section "Device" Identifier "USB Device 0" driver "fbdev" Option "fbdev" "/dev/fb2" Option "ShadowFB" "off" EndSection ############## SCREENS ###################### Section "Screen" Identifier "HDMI" Device "Device 0" Monitor "HDMI1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "USB" Device "USB Device 0" Monitor "USB1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• hp DL380 G4 won't boot with disk plugged into front USB

  - by Kev

  We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

  Read the article

• Use windows 7 inside virtual box,as guest i mean, to create a Windows 7 USB using "Windows 7 USB/DVD Download Tool" ? (Linux as host)

  - by Abel Coto

  I want to download the Windows 7 professional iso (x32), from microsoft, and , i can do two things. Or buy a new burner , as mine doesn't work (i am trying to decide what dvd writer i could buy) or use a usb dongle to copy the iso to it , and install it via usb. I want to install Windows 7 in a netbook that now has debian,and in my pc. I think i have to buy only the license for the pc , as the netbook came with windows 7 preinstalled, so i suppose that i can use that serial to activate the windows , although i don't know how to install windows 7 starter instead of professional (i think if you remove a file from the iso, windows let you choose the edition to install). The problem is that in both pcs there isn't any windows , only debian. My father has a netbook with windows 7 starter, but i think it hasn't antivirus (at least until have the Karspersky Internet security for 3 pcs bought ), and i don't trust to make the usb there , if i don't now that there isn't any virus or malware. So i am trying to find a way of Create a Windows 7 usb installation , to at least be able to install windows 7 in the netbook without a external dvd writer. I know that with dd in linux you can copy a debian.iso to the usb , and then install debian with it (i've done it) using something like dd if=win7.iso of=/dev/sdb, but i don't know if this would work for windows 7 iso,and if dd will correctly copy the iso to the usb. I suppose that if you are able to boot and install windows 7 from the usb , is that the method works,and you can forget of problems later with the windows 7 installation (problems because some files could not be copied or like). So , i remembered that Microsoft created a tool to copy the iso to the usb using windows. So i thought that i could install in my pc , virtual box , as i have VT and 8 GB ram in it, and download the iso from microsoft ,install windows 7 in the virtual machine , and then copy the iso inside the machine , donwload the iso tool, and atach a usb to the pc, connect it to the guest , and use the tool to copy the iso to the USB. But i don't now if is possible to use a virtual machine to do this , or the virtualization could give problems with the usb, or something. I have found some minutes ago this How to make a windows 7 usb flash install media, from linux? The first method (dd) is the one i like more , and i trust more ( i don't now if the second method using ms-sys , works well , and if i can trust it. I understand that a iso is like a .rar , but no compressed,only containing the files ,so mount the iso and cp the data inside perhaps is ok. Although the method i like more is the microsoft one (more because is from microsoft , and i suppose they now what they do ,at least with this usb related thing, than anything). Perhaps worth more to buy a external dvd writer haha ... Should the virtual machine method work ?

  Read the article

• Known USB 2.0 devices don't install driver, but must be manually forced

  - by Darragh

  When a known USB 2.0 device is plugged in and detected, it doesn't install the driver correctly but shows a Code 28 error and lists the device under "Other Devices" in Device Manager. When view properties of this device , it shows the following status; The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. When updating the driver manually and selecting the appropriate driver Windows doesn't believes it's the correct driver, but you can force the installation and it works! The other condition the driver will auto-install is when the same USB device is plugged into a USB 3.0 port. Power related issues are not also causing this as I have tried vi a Docking station, USB hub. etc.. Devices tried; Jabra Headset USB-Mass Storage Device (flash disk and ext HD) MS Wireless Keyboard & Mouse USB Ethernet controller (USB-MAC controller) This is on a laptop part of a Domain with Windows 7 Ent 7601, I am logged in as a local administrator. There isn't any Group Policies blocking not signed driver or whitelisted devices on the domain. Any suggestions please feel free

  Read the article

• What are USB device resets?

  - by ILIV

  I have this brand-new software RAID-1 built with two WD Elements external USB drives, and I can see that Linux repeats the following message quite a bit: ... [302148.036912] usb 1-3.1: reset high-speed USB device number 19 using ehci_hcd [302153.052029] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302186.031481] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302217.050210] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302281.043543] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302312.090158] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302351.076851] usb 1-3.1: reset high-speed USB device number 19 using ehci_hcd ... So, what does it say? Is this normal? Is this a problem that I should try to fix?

  Read the article

• USB Drive that simultaneously connects to more than one computer

  - by user2499

  Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

  Read the article

• Warning message during boot after installation of kernel 3.3: Kernel needs AppArmor 2.4 compatibility patch

  - by Matus Frisik

  I have Ubuntu Server 11.10 and after installation of kernel 3.3 (I just followed instructions from site www.upbuntu.com - How To Install Linux 3.3 Kernel In Ubuntu 11.10/12.04) It shows me following message during boot: fsck from util-linux 2.19.1 fsck from util-linux 2.19.1 /dev/sda5: clean, 204099/1152816 files, 988854/4608639 blocks /dev/sda6: clean, 2345/1281120 files, 142711/5120710 blocks modem-manager[830]: ModemManager (version 0.5) starting... * Starting mDNS/DNS-SD daemon [154G[ OK ] * Starting CUPS printing spooler/server [154G[ OK ] * Starting Mount network filesystems [154G[ OK ] * Stopping Mount network filesystems [154G[ OK ] * Starting System V initialisation compatibility [154G[ OK ] * Stopping Failsafe Boot Delay [154G[ OK ] Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/bin.ping (/etc/apparmor.d/bin.ping line 28): profile /bin/ping network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/lightdm-guest-session (/etc/apparmor.d/lightdm-guest-session line 71): profile /usr/lib/lightdm/lightdm-guest-session-wrapper network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.dhclient (/etc/apparmor.d/sbin.dhclient line 73): profile /sbin/dhclient network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.klogd (/etc/apparmor.d/sbin.klogd line 35): profile /sbin/klogd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.syslog-ng (/etc/apparmor.d/sbin.syslog-ng line 52): profile /sbin/syslog-ng network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.syslogd (/etc/apparmor.d/sbin.syslogd line 40): profile /sbin/syslogd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile /usr/lib/chromium-browser/chromium-browser network rules not enforced Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile browser_java network rules not enforced Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile browser_openjdk network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince network rules not enforced Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince-previewer network rules not enforced Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince-thumbnailer network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.deliver (/etc/apparmor.d/usr.lib.dovecot.deliver line 24): profile /usr/lib/dovecot/deliver network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.dovecot-auth (/etc/apparmor.d/usr.lib.dovecot.dovecot-auth line 24): profile /usr/lib/dovecot/dovecot-auth network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.imap (/etc/apparmor.d/usr.lib.dovecot.imap line 23): profile /usr/lib/dovecot/imap network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.imap-login (/etc/apparmor.d/usr.lib.dovecot.imap-login line 22): profile /usr/lib/dovecot/imap-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.managesieve-login (/etc/apparmor.d/usr.lib.dovecot.managesieve-login line 22): profile /usr/lib/dovecot/managesieve-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.pop3 (/etc/apparmor.d/usr.lib.dovecot.pop3 line 22): profile /usr/lib/dovecot/pop3 network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.pop3-login (/etc/apparmor.d/usr.lib.dovecot.pop3-login line 21): profile /usr/lib/dovecot/pop3-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.telepathy (/etc/apparmor.d/usr.lib.telepathy line 86): profile /usr/lib/telepathy/mission-control-5 network rules not enforced Warning from /etc/apparmor.d/usr.lib.telepathy (/etc/apparmor.d/usr.lib.telepathy line 86): profile /usr/lib/telepathy/telepathy-* network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.avahi-daemon (/etc/apparmor.d/usr.sbin.avahi-daemon line 30): profile /usr/sbin/avahi-daemon network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 170): profile /usr/lib/cups/backend/cups-pdf network rules not enforced Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 170): profile /usr/sbin/cupsd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.dnsmasq (/etc/apparmor.d/usr.sbin.dnsmasq line 51): profile /usr/sbin/dnsmasq network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.dovecot (/etc/apparmor.d/usr.sbin.dovecot line 37): profile /usr/sbin/dovecot network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.identd (/etc/apparmor.d/usr.sbin.identd line 31): profile /usr/sbin/identd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.mdnsd (/etc/apparmor.d/usr.sbin.mdnsd line 35): profile /usr/sbin/mdnsd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.mysqld (/etc/apparmor.d/usr.sbin.mysqld line 44): profile /usr/sbin/mysqld network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.nmbd (/etc/apparmor.d/usr.sbin.nmbd line 21): profile /usr/sbin/nmbd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.nscd (/etc/apparmor.d/usr.sbin.nscd line 46): profile /usr/sbin/nscd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.smbd (/etc/apparmor.d/usr.sbin.smbd line 40): profile /usr/sbin/smbd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.tcpdump (/etc/apparmor.d/usr.sbin.tcpdump line 64): profile /usr/sbin/tcpdump network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.traceroute (/etc/apparmor.d/usr.sbin.traceroute line 26): profile /usr/sbin/traceroute network rules not enforced * Starting AppArmor profiles [160G [154G[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher Checking for running unattended-upgrades: What does this warnings mean and how can I fix it? Informations about my system: response@response:~$ uname -a Linux response 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 01:43:18 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

  - by digby280

  I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Hybrid Graphics on Windows 7/Ubuntu 12.04 Dual Boot

  - by Noob.

  Alright, so here's the situation: I am using an ASUS UL80VT with two graphics cards: Integrated intel graphics and NVIDIA G210M I was running an Ubuntu 12.04 - Windows 7 dual boot (on separate partitions).The machine worked perfectly (including the display drivers) without me needing to install anything special or change any settings. However, my hard drive was corrupted and I lost all my data yesterday, so after it was replaced, I installed Ubuntu 12.04 64x again after installing Windows 7. I booted up Ubuntu after installation, and noticed it was by default using Unity 2D... Gnome 3.4 wasn't working properly either, so I guessed that the NVIDIA G210M driver wasn't installed/working and the OS was instead using the integrated graphics. I checked the "Additional Drivers" thing, but there were no proprietary drivers listed there, so I went to the NVIDIA website, downloaded the driver directly and installed it. I restarted, but there was no change. After this, I read somewhere that I should change my SATA in the BIOS to "Compatible" rather than "Enhanced". This worked fine and fixed the problem (both Unity and Gnome were working perfectly) but then when I tried booting up Windows 7, I recieved the BSOD. So I changed it back to Enhanced, and once again, the NVIDIA 210M graphics isn't working on Ubuntu, but on Windows 7 it is. I do not want to keep changing from Enhanced to Compatible every time I reboot to Ubuntu and neither do I want to simply just use one OS. Note that NVIDIA 210M and integrated graphics work perfectly on Windows 7. Also, I don't care about switching between them, I just want to be able to use the NVIDIA one. What can I do so that both Windows 7 and Ubuntu work and NVIDIA G210M works on Ubuntu?

  Read the article

• Dual Boot Installing Ubuntu 12.04 with Windows 7 (64) on a non UEFI system

  - by Randnum

  I cannot seem to install the correct boot loader for a non-UEFI firmware system. I'm trying to install Ubuntu 12.04 and Windows 7 (64) which are technically compatible with GPT but for windows only if the firmware is UEFI enabled. My system uses the old BIOS system and does not support UEFI. Therefore, whenever I finish my Ubuntu install and try to install Windows I get a "cannot install to GPT partition type" error. Even if I use Gparted to format a special NTFS file format for windows it can't handle the GPT partition style because it doesn't have UEFI. But my ubuntu install always forces GPT during installation and never asks if I want to install the old BIOS style MBR instead. How do I resolve this? Both OS's will install fine on their own the problem is when I try to install the second OS it doesn't recognize any of the other's partitions and tries to rewrite it's own on top of the other. I've tried both OS's first and always run into the same problem. Since there is no way to make Windows recognize GPT without upgrading my Motherboard how do I tell Ubuntu to use the old BIOS MBR on install? Do I have to download a special Ubuntu with a specific grub version? or should I manaually configure my partition somehow to force it not to use GPT? Thank you,

  Read the article

• DHCP-server doesn't start at boot because of wrong startup order

  - by stolsvik

  Apparently the isc-dhcp-server is started too early in the boot sequence, it states that it has nothing to do. If I just log directly in as root and start it using the init.d-script, it starts normally. My setup is basically an utterly standard router, with an eth0 on the inet side, and an eth1 on the lan side. However, I've defined a bridge instead of the eth1 for the lan-side. Thus, the lan-part of the network isn't up until the bridge is up. I currently believe that the dhcp server is brought up before the bridge is brought up, probably because the bridge is brought up with the 'networking' task, while the eth's are taken up with the 'network-interface' tasks - which are run earlier. (also, the bridge takes a small age to get up compared to the eth's). If I do take away the bridge config, instead using eth1 directly for the lan side, things work. (However, judging by syslog, things are still tight.) Ideas of how the get DHCP to start later? (The reason for the bridge, is to be able to use KVM with bridged networking..)

  Read the article

• Need to run a .sh as root on boot or login

  - by Graymayre

  Still new with linux and running ubuntu 12.10 I have a wireless stick (ae2500) which has known issues that has been partially solved using ndiswrapper. However, to use it I must run the same scripts every time I reboot, effectively uninstalling and reinstalling the driver. I made a .sh file to run every time to make it easy, but I must do the sudo login everytime. There are three solutions I am looking for and although not all are necessary to solve this particular problem, I would still like to know them all for learning purposes. run scripts or file.sh on boot (as well as other programs) run scripts or file.sh automatically with root privileges make the install permanent so as not to have to go through the process every time. Any additional information that can help me regarding this that I did not think to ask (including streamlining my commands), or general knowledge, would be greatly appreciated. Following are the contents of the file. I pretty much just made it as I would have entered it. cd ~/ndiswrapper-1.58rc1 sudo modprobe -rf ndiswrapper sudo rm /etc/modprobe.d/ndiswrapper.conf sudo rm -r /etc/ndiswrapper/* sudo depmod -a sudo make uninstall sudo make sudo make install sudo ndiswrapper -i bcmwlhigh5.inf ndiswrapper -l sudo modprobe ndiswrapper

  Read the article

• Computer suddenly won't boot - stops at a flashing prompt

  - by Dave M G

  I have been running Ubuntu on my computer for a long time, and I have been using 11.10 since it became available in October. Suddenly, this morning, when I rebooted, the computer would not reach the log in screen. I go through the standard POST boot sequence, and I also get a splash screen for my Nvidia graphics card, so at least most of the hardware seems to be working. After that, all I get is a flashing text prompt - one blinking white underline character on a screen that is otherwise completely blank. I don't think it is even reaching GRUB. No key input is possible. I have tried various key combinations to try and initiate some kind of interface, be it command line or anything else. The only key combination that works is [CTRL]+[ALT]+[Delete] to reboot. I realize this is likely to be a hardware problem, but it could be an Ubuntu problem(?), so I'm hoping for a specific set of troubleshooting steps so I can diagnose and repair this issue. My current suspicion is that one of the drives in my 2 disk software RAID has failed (even though they should be too new for that). However, this computer is critical to my work, so I'd like to invite advice on any possibilities so as to waste as little time as possible in fixing this machine.

  Read the article

• Share home directory between Linux and Windows dual boot

  - by user877329

  This question is somewhat similar to How to use Windows Share has home directory, but in this case Windows is not running. I have installed a dual-boot configuration with Ubuntu 12.04 and Windows. My Windows partition is mounted on /C. Now I want either Ubuntu to locate home directories in /C/Users Which is the location of windows accounts or I want Windows to use D:\home for home directories. (D is the name of the Ubuntu root directory). For the first approach, I have managed to create a test user account test-user:x:1004:1001:Test:/C/Users/test-user:/bin/bash The account works but test-user cannot run any X session. From .xsession-errors chmod: Changing rights on ”/C/Users/test-user/.xsession-errors”: Operation not permitted Would it help get rid of that chmod, which has no effect? How do I? If I use the second approach, I need the Ext2fsd driver, which seems to work, but I am not sure if Windows maps the Ext2 system that early. Here is my fstab proc /proc proc nodev,noexec,nosuid 0 0 UUID=e7cef061-ed8d-4a82-b708-0c8f4c6f297f / ext3 errors=remount-ro 0 1 UUID=2CDCEB43DCEB0644 /C ntfs defaults,umask=007,gid=46 0 0 UUID=b087b5c0-b4bd-47e7-8d34-48ad9b192328 none swap sw 0 0 Update: I found something here: http://www.tuxera.com/community/ntfs-3g-advanced/ Will work if i do a correct mapping between NT users and Linux users.

  Read the article

• Ubuntu 12.04 Fails to Boot after Reboot

  - by Joe

  I have installed Ubuntu 12.04 on several Dell c6220 servers. The install was successful and all hardware is recognized. The problem that I am running into is that when issuing the reboot command or when pressing ctrl-alt-del, the server shuts down, but never comes back up. Instead, the fan revs up to full speed and stays that way until I power the server down. Once the server has been powered down via the power button, Ubuntu will boot just fine -- until the next reboot. I have found that by rebooting the server via the DRAC web interface will reboot the server correctly. I have also found that this problem does not exist with CentOS -- I can press ctrl-alt-del all day long and it always comes back up. I've tried several kernel parameters such as: reboot=bios reboot=pci reboot=acpi reboot=cold acpi=off noapic Nothing seems to work. I have also tried upgrading to kernel 3.4, but no change there, either. Has anyone run into a similar problem or any pointers on troubleshooting? Thanks, Joe

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >