Search Results

Search found 13537 results on 542 pages for 'installation failure'.

Page 480/542 | < Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >

  • What could cause Windows 7 to hang whenever I install something?

    - by Larsenal
    I've had this problem when installing several different programs (iTunes, Adobe Acrobat Reader just to name two). Regardless of what the program is, the install usually gets at least 90% through the process and then just hangs. I don't see anything bad in the event log besides the following (and this didn't occur exactly at the time of install): wuaueng.dll (964) SUS20ClientDataStore: A request to write to the file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" at offset 16252928 (0x0000000000f80000) for 32768 (0x00008000) bytes succeeded, but took an abnormally long time (185 seconds) to be serviced by the OS. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. I've run check disk and it passed. I've had some problems with BIOS settings in the past with Windows 7, but I'm not sure whether that could be related. Update... I also see this error in the event log: Volume Shadow Copy Service error: Unexpected error querying for the IVssWriterCallback interface. hr = 0x80070005, Access is denied. . This is often caused by incorrect security settings in either the writer or requestor process. Operation: Gathering Writer Data Context: Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220} Writer Name: System Writer Writer Instance ID: {33493f01-ac1b-4efb-a378-3053ab03100d} One last wrinkle.... I see "Previous versions" of c:\ which look like they correspond to the time of attempted installation.

    Read the article

  • ssh hangs on "Last login" line

    - by Pavel H
    This happened for the first time three days ago - I ssh to the server, authenticate using a password, get the welcome message but it remains hanging on the "Last login:..." line. The command line doesn't show and the server doesn't react to my input. Other services on the server keep working ok (apache, tomcat, database, ..). The box has an out-of-band management using which I was able to restart it. After the restart the ssh worked ok again and I didn't find anything suspicious in the logs. Three days later the same problem occurs on this box again, and newly on yet another server in the cluster - 100% same symptoms. Both servers have about 2 month old installation of Debian Squeeze (6.0.2) and the problem never occurred before despite frequent ssh-ing, so it should not be a problem of settings. We haven't been installing anything new for quite some time now. I also made sure there is enough disk space on both servers. Since it started to happen all of a sudden on two servers at about the same time, I suspect some bug may have been introduced via Debian updates, yet I haven't been able to find anyone with the same problem. Most similar issues I have found: ssh freezes at the "Last Login Line" - in our case everything worked fine until recently, so nothing related to settings should be our problem. Diskspace checked, I couldn't check the memory but I would expect something would be in the logs if the system had been running out of it. Remote Fedora system unresponsive, odd but consistent behavior when trying to log in - problem with high load on the server; unlike in this case, nothing changes even if I wait for 10+ minutes

    Read the article

  • Intel HD Graphics vs NVIDIA Quadro FX 380 PCI-E

    - by Michael
    I recently purchased an Acer Veriton which has an i5-650 processor, Windows 7 Pro (64 bit) and Intel HD Graphics listed as the video card. I also purchased a PNY nVIDIA Quadro FX 380 PCI-E card for improved picture and home video viewing and editing. I have already replaced the original 300 wattt power supply to a 430 watt Antec Truepower I had on hand and boosted the RAM to 8 gigs from the original 4. Question 1) Am I getting any improvement in visual quality or system speed with the Quadro or is it a waste of money and I should just save up to buy a bigger video card? This card was on sale for $115. If I am getting improvement then I need to ask another question. Question 2) Instructions for the Quadro installation are as follows... 1--Uninstall the existing VGA driver. -Remove the existing Display Driver via "Add or Remove Porgrams". -Shut down your computer. 2--Remove your Existing Graphics Board (or Disable Integrated 3D Graphics Controller). skipping instructions on how to remove existing graphics board -Systems with integrated (also know as on-board) 3D graphics may require you to disable the integrated 3D graphics system. Consult the owners or vendor manual that came with your PC on how to properly do this. So is the Intel HD Graphics considered a 3D graphics controller? If so should I just contact Acer or can anyone give me instructions? Thanks in advance for any help.

    Read the article

  • What is the solution to enable Dymo Turbo 400 Label Printer to work on Win 7 / 64-bit?

    - by mdpc
    It's Christmas time and time for printing labels for all those Christmas cards. I've upgraded to Windows 7 64-bit from XP. I've been unsuccessfully attempting to get the connected Dymo 400 Turbo label USB printer to work again. The latest manufacturer drivers have been successfully loaded and installed. The drivers are supposed to work on Windows 7/64-bit. The Win 7 system(s) in question are patched and up-to-date on that score. The Windows Update site responds with a driver when the USB cable is connected to this printer. The printer queue seems to be established correctly. What happens is that I submit a job to the printer (either using the DYMO s/w or not), it delays for a period of time, and then I get the message 'printing error'. Can't seem to locate the appropriate error in the new and improved event log. Several combinations of rebooting, re-installation and power cycling components fail to make the printer work. Sometimes during some type of reset it spits out the last thing to be submitted, but that seems intermittent. I have tried different USB cables and different USB (2.X) ports as well. I have run the Windows 7 troubleshooter it tries to fix the problem but alas it doesn't. Interestingly, trying the USB printer (and its associated manufacturer drivers and s/w) on another Windows 7 64-bit system has the identical failures noticed on the original system. I did not find anything on the manufacturers' site concerning this problem. The printer has no hardware problems or issues.

    Read the article

  • Missing Boot Manager in Vista

    - by Selase
    I am in really deep trouble here and would need advice. A message just pop up on my screen and I had to restart my laptop. Upon restarting the Boot Manager got corrupted. I am running Windows Vista 32 bit by the way. I got onto Google with a friend's PC and found two basic ways of fixing it. The first one that requires Windows to automatically fix it using Startup repair ends up with the error message: Startup REpair cannot repair this computer automatically The second option that requires me to rebuild the BCD scans my system and finds the operating system on drive D:\Windows which I believe should be C:. If I hit Y(yes) for the rebuild process to take place I get the message The required system device cannot be found I then try the second option which requires me to recreate the BCD Store. It ends up with an error message that says: The store export operation has failed. The requested system device cannot be found Proceeding from there is meaningless since the system device cannot be found. I somehow believe the device cannot be found because it's identifying the Windows installation on D: instead of C: but how to change that I have no idea. I don't know how it happens to identify an operating system on D: when there's none there. How do I go about fixing the Boot Manager? I have very important files on my system and can't afford to reinstall Windows. I really need to fix this.

    Read the article

  • NGINX AEGIR DRUPAL permissions 403 forbidden

    - by nlam
    New to nginx Installed on mac os for use with aegir & drupal It's running great, but I have a problem with permissions My hostmaster installation is here : /var/aegir/hostmaster-6.x-1.7/ The hostmaster settings file here : /var/aegir/hostmaster-6.x-1.7/sites/aegir.ldev/settings.php Permissions for settings.php are set to 440 automatically by hostmaster, but I'm getting a 403 forbidden page because of this. If I give read permission to "other" the site works great (444 or even 004). Drupal is also telling me that the file system paths are not writable (sites/aegir.ldev/files & sites/aegir.ldev/private). I would have to change the permissions there too. Moreover, I would also have to change permissions for every site installed by hostmaster. Anyway. In my nginx.conf I have the following : user "myuser" _www; Owner and group for settings.php, /sites/example.ldev/files, /sites/example.ldev/private are "myuser" and "_www". Changing permissions to 004 solves this problem, but really confuses me. Why do "other" have permission and not owner or group? I've checked the processes running in activity monitor. Nginx is running as "myuser". Except for one process running as root. So I'm stumped. Hope someone can help.

    Read the article

  • Compatibility of Fedora install on a Hybrid drive

    - by kjh
    I recently bought un ultrabook with a 500gb/32gb sdd hdd hybrid drive, and I'm having trouble replacing windows on it with fedora seventeen. it errors out saying there was an unhandled exception. Is linux compatible with hybrid drives? or can the operating system on a hybrid drive not be replaced? Edit: here are the steps I select special storage devices because it ignores my hard drives otherwise at this point i get the message: "Disk contains bios raid meta data, disk sda will be ignored" I can pick a hostname, select my timezone and set a password at the install type screen, no matter what I select (use all free space, replace linux systems, create custom partition etc..) once I click next, it says "an unhandled exception" has occured. and I can no longer proceed with installation. Here is the error message: anaconda 17.29 exception report Traceback (most recent call first); File "/usr/lib64/python2.7/size-packages/pyanaconda/bootloader.py"; line 183 self.stage1_drive=self_drives[0] File "/usr/lib64/python2.7/site-packages/pyanaconda/rw/cleardisks_gui.ph"; line... and tons of more lines like that

    Read the article

  • Installed Windows 7 Ultimate on D Drive and previous Windows 7 Enterprise on C Drive has stopped starting up

    - by teenup
    Please please help! I have installed Windows 7 Ultimate on same hard drive on D Drive on my laptop and the previous Windows 7 Enterprise which was installed on C Drive is not booting up now. When I turn on my laptop, I see two Windows 7 on the screen, when I select newer one, it starts, but when I select older one which is Enterprise edition, system won't start and I get the DOS black screen with this error message: Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert your Windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "repair your computer." Info: The boot selection failed because a required device is inaccessible. I notice that when I run the newer OS installed, the previous OS's drive (Which is D: now instead of C:) has become unusable and when I double click it, it asks me to format the drive. The data, that I had on my D Drive (Which is now C Drive for new OS), I had copied it to a network path and it is available. It was containing Windows 7 Users folder which I copied at that time when installing new windows. I have copied that Users folder again to the new OS's C Drive thinking it would run again, but of no use. Please please please...if someone can help...It is extremely required for me. Thanks a lot in advance.

    Read the article

  • How to get back the themes feature in Windows XP?

    - by Martín M.
    When I try to set a visual style in Windows XP (the standard Luna, for example), I get one of these two: "Access denied" error. It works, but when I restart the computer, I get the Classic look again, with no errors. Also, the "Windows and icons" dropdown is grayed out in the "Appearance". This is a list of things I have tried, with no results: Making sure "Use visual styles on windows" is checked on System Properties Advanced Performance. Restarting the "Themes" service. It starts cleanly, no errors. Applying these two fixes: Kelly's Corner and tweaks.com. Running sfc /scannow and checking the integrity of uxtheme.dll against a clean installation of XP Restoring the whole \Windows\Resources\Themes directory. Creating a new user. The new user does not seem to suffer this problem. Maybe this is the solution, create a new user and migrating all the data, but it would be a pain, and I would prefer reinstalling the whole thing. I am using Windows XP Professional SP3, with no spyware, no virus, and no other visible malfunctions. How can I fix this?

    Read the article

  • PHP pages are not parsed by Apache on CentOS

    - by Ram
    I have installed Centos 5.x, Apache 2.2, PHP 5.3 and MySQL 5.5. I also installed phpMyAdmin. I am able to access phpMyAdmin through the browser without any issues. However, when I create a simple index.php with phpinfo() function in the default directory, that page is served without php parsing. As we all know, phpMyAdmin is a php application. This is working fine from the same server but not the simple php page from the doc root directory ??!!!. Of course, I tried moving this page into phpMyAdmin folder and tried accessing it, but no success. Please note that I updated httpd.conf file with appropriate directives based on the php installation guide.Following directives were added to httpd.conf. AddTyoe application/x-httpd-php LoadModule php5_module /usr/lib/httpd/modules/libphp5.so <FilesMatch "\.php$"> SetHandler application/x-httpd-php </FilesMatch> File locations are: docroot - /var/www/html phpMyAdmin folder - /var/www/html/phpMyAdmin File privileges are: [root@linuxdev1 html]# ls -Z -rwxr-xr-x root root index.php drwxr-xr-x root root phpMyAdmin -rw-r--r-- root root phpMyAdmin-3.4.3.2-english.tar.gz drwxr-xr-x root root test1 Any help is appreciated.

    Read the article

  • Low-traffic WordPress website on Apache keeps crashing server

    - by OC2PS
    I have recently moved my low-moderate traffic (1000 UAUs, 5000 pageviews on a busy day) website from shared hosting to a Centos 6 64-bit VPS with Apache and cPanel running on 4 quad-core processor (likely oversold) and 3GB memory (Xen). We've had problems from the beginning. The server keeps crashing. It seems PHP keeps expanding till it consumes all the memory and crashes the server. Some folks have suggested that I should abandon Apache/cPanel/PHP/mySQL and go with nginX/Varnish/PHP-FPM/SQLite. But that's just not possible for me as I am not very tech savvy and need a simple GUI like cPanel to be able to manage the mundane management tasks (can't afford to hire system administrator or get fully managed hosting). I have come across several posts discussing optimization of Apache for WordPress. But all of these lead to articles that are pretty dated such as this ~4 year old one from Jan 2009 - http://thethemefoundry.com/blog/optimize-apache-wordpress/ The article is pretty detailed and seems helpful, but I stumble even on the first step. My httpd.conf only has 2 loadmodule commands LoadModule fastinclude_module modules/mod_fastinclude.so LoadModule bwlimited_module modules/mod_bwlimited.so So I go total bust right there. Further, my httpd.conf says Direct modifications to the Apache configuration file may be lost upon subsequent regeneration of the configuration file. To have modifications retained, all modifications must be checked into the configuration system by running: /usr/local/cpanel/bin/apache_conf_distiller I am having trouble finding where to change the modules in WHM. Please can someone help me with updated guidelines on how to optimize Apache for WordPress? Many thanks! P.S. The WordPress installation also has WP Super Cache installed. P.P.S. I also have phpBB, OpenCart, and Menalto Gallery installed.

    Read the article

  • Which program is locking all my executable files?

    - by Tom Wijsman
    When updating any software product, as well as manually trying to replace .exe files, it says that access is denied to the file and in fact the System process is holding a handle to the file when I check it with Process Explorer. This must be a driver or something that is malfunctioning was my first though, but now I wonder how I figure out which driver / program is doing this and why it is so. Unlocker doesn't seem to be working for me, unless someone can tell me how to use it properly other than making it appear a magical wand in the notification area.... This is what Unlocker puts in my event log: The description for Event ID 1060 from source Application Popup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: \??\C:\Program Files (x86)\Unlocker\UnlockerDriver5.sys the message resource is present but the message is not found in the string/message table Upon searching event 1060 I get: <file name> has been blocked from loading due to incompatibility with this system. Perhaps it is because I have 64 bit?

    Read the article

  • ubuntu's average load never below "0.00 0.01 0.05"

    - by Karma Fusebox
    I have several ubuntu 12.04 VMs running on a ubuntu 12.04 KVM host. Those of the virtual machines that are totally idle with no services (except syslog and the other "small" standard stuff of a fresh installation) show a constant load of "0.00 0.01 0.05" in top/htop as average 1/5/15. When there are "real" applications running, the load averages behave perfectly normal but they never fall below the mentioned values. While this doesn't affect performance at all and could easily be ignored, it screws up the monitoring graphs in a very annoying way: (Notice how load15 behaves nicely if 0.05 for a short time in the right half of the pic) Unfortunately I don't know what diagnostic outputs might be helpful for you, so here's some default stuff: # top top - 16:31:01 up 1:05, 1 user, load average: 0.00, 0.01, 0.05 Tasks: 62 total, 1 running, 61 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.2%sy, 0.0%ni, 99.2%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1019464k total, 73452k used, 946012k free, 6140k buffers Swap: 0k total, 0k used, 0k free, 22504k cached . # free -m total used free shared buffers cached Mem: 995 72 923 0 6 21 -/+ buffers/cache: 43 951 Swap: 0 0 0 . # iostat -x /dev/vda Linux 3.2.0-32-virtual (vm3) 11/15/2012 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.25 0.00 0.65 0.20 0.24 98.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util vda 0.14 0.12 0.51 0.22 6.74 1.46 22.50 0.02 23.26 20.64 29.30 7.63 0.56 Need something else? Has anyone ever seen this behavior? Might this be a bug in kvm/ubuntu/kernel 3.x in the end? Thanks a lot!

    Read the article

  • Korean characters not appearing in Korean Windows XP computer

    - by user13267
    I am using a Korean software (with a partial English interface) in a Korean Version of Windows XP SP 3 However, in parts of the software, even when I change the interface to Korean, Korean letters show up as random characters, as shown here: This is happening at others parts of the software as well, and I am not sure what is the difference between the places where this is happening, and places where this is not happening. For example, a command button where Korean letters are showing up properly is shown below: This software is a video conferencing software and has a chat feature as well. When I type into the chat box, i can see the Korean letters appear properly at my side, but when I press Enter and send the message, it changes into random characters as shown above in the chat box. What could be the issue here? Could it be a missing font in my computer? Since this is a Korean Windows installation I was hoping everything would work properly by default. What can be done here? EDIT 1: I asked some other people who are using this software, and they think that the problem is at my end, and playing around with the Regional and Language Settings might solve the problem. Also, they suggested I install all the language packs related to Korean display. But it looks like all the language packs have been installed, and my location is set to Korea in Regional and Language Settings in Control Panel, and I still have this problem. Also, I have had similar problems with displaying Korean on an English Windows XP computer. This answer suggested some solutions, but I still do not quite understand exactly what I have to do (at that time I had not fixed the problem, as I later on changed the computer). If I follow that answer, what fonts exactly do I need to install?

    Read the article

  • How can I confirm that burn process was completed successfully??

    - by infant programmer
    Just now I tried to make a duplicate copy of my Windows XP Pro SP3 CD. I had set 32X speed while the max speed allowed is 48X. And checked "Verify the Data after burning". I didn't observe how much % did it complete. But after 15 mins (which is sufficient period to burn disc), I heard "Fatal Error" sound. When I saw the monitor, There was a message box which was showing "Error while burning Disc", I saved the error log which you can find here click_me. How do I acknowledge that burning process is done?? Well. my PC is able to read the CD and CD is bootable too.. I am not sure .. whether the burning process got failed or the verify Process! Please let me know if you have come across or aware of such situation .. As it is XP installation CD .. I don't want to do trial and error method. regards,

    Read the article

  • Full Apache config migration

    - by Victor Rashkov
    I searched alot and didn't find an applicable answer. I have a working LAMP setup on Ubuntu machine and I have to migrate to a new server in a different country. The old server is 11.10, the new server is 12.04LTS. My problem is that I simply can not remember the steps I followed when I configured the current server which is not the basic LAMP install. It is Apache with FastCGI, SuEXEC, a GD library, worker MPM and all sitting on top of a mhddfs system. There are also other configs I've changed and I can not recall what they are. Because of the complexity of the setup, my attempts to migrate to the new server fail. I get permissions errors, cgi problems etc. Therefore my question is : Is there a sane way to simply tar a full backup of the current web server installation, including MySQL, Php amd the apache server with all configs, and then move it to the new machine? I shall be forever thankful on any advise. So far non of thise I found here gave me an answer. Thanks!

    Read the article

  • nVidia performance with newer X and newer driver abysmal with Compiz

    - by Nakedible
    I recently upgraded Debian to Xorg 2.9.4 and installed nvidia-glx from experimental, version 260.19.21. This was somewhat of an uphill battle as the dependencies for the experimental nvidia-glx package are still somewhat broken. I got it to work without forcing the installation of any packages and without modifying the packages. However, after the upgrade compiz performance has been abysmal. I am using the desktop wall plugin and switching viewports is really slow - takes a few seconds for each switch. In addition to this, every effect that compiz does, such as zoom animations for icons when launching applications, takes seconds. The viewport switching speed changes relative to the amount of windows on that virtual screen - empty screens switch almost at normal speed, single browser windows work almost decently, but just 4 rxvt terminals slows the switches down to a crawl. My compiz configuration should be pretty basic. Xorg is likewise configured without anything special - the only "custom" configuration is forcing the driver name to be "nvidia". I've fiddled around with the nvidia-settings and compizconfig trying different VSync settings, but none of those helped. My graphics card is: NVIDIA GPU NVS 3100M (GT218) at PCI:1:0:0 (GPU-0). This is laptop GPU that is from the Geforce GTX 200 series. Graphics card performance should naturally be no problem. EDIT: In the end, nothing really worked, and I got really annoyed with the state of compiz and its support in Debian. Many nVidia driver revisions have passed and I am using Gnome 3 now, so I am accepting the best answers to this question even though the issue was not resolved.

    Read the article

  • can't register a soft phone to asterisk11

    - by Tom
    I have a VM (on oracle vbox) running Fedora17. I've installed asterisk 11 on it from sources. I've followed the wiki for installation (https://wiki.asterisk.org/wiki/display/AST/Creating+SIP+Accounts) to the letter. The ip on the VM machine running fedora is 192.168.1.7 and I can ping it from the host machine (Ubuntu 12.04), which is at 192.168.1.2 I've tried registering with ekiga with the following settings: user: [email protected]. Password: verysecretpassword registar: 192.168.1.7 but I'm getting an error "transport fail". Also, while trying to register I'm logged in to the asterisk CLI with verbose level 3 and debug level 4 and nothing appears. some more relevant data: I've added the following code to the end of my sip.conf.sample file: [demo-alice] type=friend host=dynamic secret=verysecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 [demo-bob] type=friend host=dynamic secret=othersecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 After I changed the sip.conf.sample file, I've created a copy of it and named it sip.conf. then I logged in to the asterisk CLI and typed sip reload. Then I'm trying to register and ekiga client from my host machine at 192.168.1.2 but it doesn't work and nothing appears on the asterisk CLI while in verbose mode level 3. BTW, If there is missing information about my question, please don't close it. comment about what you need to know and I'll edit it in to the question. tnx.

    Read the article

  • How can I confirm that burn process is completed successfully??

    - by infant programmer
    Just now I tried to make a duplicate copy of my Windows XP Pro SP3 CD. I had set 32X speed while the max speed allowed is 48X. And checked "Verify the Data after burning". I didn't observe how much % did it complete. But after 15 mins (which is sufficient period to burn disc), I heard "Fatal Error" sound. When I saw the monitor, There was a message box which was showing "Error while burning Disc", I saved the error log which you can find here click_me. How do I acknowledge that burning process is done?? Well. I my PC is able to read the cd and it is bootable too.. I am not sure .. whether the burning process got failed or the verify Process! Please let me know if you have come across or aware of such situation .. As it is XP installation CD .. I don't want to do trial and error method. regards,

    Read the article

  • VNC Server that can be used from command line?

    - by jesusiniesta
    I'm looking for a replacement for a custom vnc server that we have been using in my company for a long time. I need a simple executable that can be run from command line by an IT Support software without the user noticing it (our application will warn the user, we don't want him to see we are using that VNC sever). I need it to support Windows and preferably also OSX. The only option I've found is UltraVNC, but I can't configure it from command line to accept loopback connections without authentication. We have already a whole VNC Viewer + VNC Repeater + Bouncers architecture, and the only missing piece is the VNC Server. Do you know any solution you could suggest me? I'm afraid I'll end up developing a new VNC server myself, may be based on an open source one. EDIT: When I said I don't want the user to notice this VNC server, I should have added that I don't want him even noticing the installation. So better if it can be installed silently or can be executed as a portable executalbe (for instance, ultravnc can be installed and ran as a service from command line, or simply executed quietly, with only a notification icon; its problem is that I can't run it without authentication).

    Read the article

  • Ubuntu 11.04 fresh install - "Input signal out of range" or "Mode not supported..."

    - by Dennis
    I recently installed Ubuntu 11.04 using a CD .iso. Installation went fine. Upon completion I rebooted and after a second or two I got a black screen with the message "Input signal out of range". And there it sits... Read a few things about how this could be related to screen resolution, refresh rate, etc. For the heck of it I tried a different monitor. The result is the same but the message provides some clues - "Mode not supported - H:92.7kHz, V:58.3Hz" (the latter is Hz; not kHz). So my thought is that I should probably be able to use the 11.04 install disc to "Try out Ubuntu", find and edit some file that was created by the install with the correct values. Problem is, I am not too sure what I am supposed to edit. Looked at the xorg.conf file but this is so minimal at this point I am not sure it is where I want to go. By the way, the monitor is an I-Inc ix191a. Anyone have any ideas on how to get around this?

    Read the article

  • 100% CPU when doing 4 or more concurrent requests with Magento

    - by pancake
    Currently I'm having trouble with a server running Magento, it's unbelievably slow. It's a VPS with a few Magento installations on it used for development, so I'm the only one using them. When I do 4 request all 2 seconds after each other I'm finished in 10 seconds. Slow, but still within the limits of my patience. When I do 4 "concurrent" requests, however (opening 4 tabs in a row, very quickly) all four cores go to 100% and stay there for like a minute. How is this possible? I know that there are a lot of possibilities here, so any tips on how to make an Apache/PHP server go faster are also welcome. It used to go a lot faster before, and I've also tried APC, but it kept causing problems (PHP errors, something with memory pools) so I've disabled it. By the way, the Magento cache is off and compiling is also off. I know this makes Magento slower than usual, but I don't think a 60 second response time is normal for any Magento installation. Virtual hardware: 4 Cores and 4096MB RAM Swap is never used (checked with htop) 100GB disk space, of which 10% is in use Software: Debian 6 DirectAdmin and apache custombuild PHP 5.2.17 (CLI) If you need more info, please tell me how to get it, because I probably don't know how. I do know how to use the command line in linux and the usage of quite a few commands, but my experience with managing a server is limited.

    Read the article

  • Remote Desktop Services Licensing - Does server have to have a RDS role?

    - by transistor1
    I recently set up a "micro" size Windows 2008 Datacenter server on Amazon AWS. My small group needs several concurrent RDS users to be able to access the machine. Without installing the "Remote Desktop Server" role, it allows 2 concurrent connections. I read on MS' website that in order to set up multiple users, we needed to install the RDS role. I did so, but now the application we are trying to share is running much slower than it was before. Prior to the role installation, it was taking about 5 seconds to open; now it is taking a few minutes to open -- without any other users logged on except me. My assumption is that the RDS role may be too much for this micro instance to handle, and currently, changing to another size instance is not an option (it may be possible later if we were to receive enough funding). This leads me to the following questions: 1) Is it a sensible assessment to assume that it is the RDS role is slowing things down, or are there other things that I could look at to speed it up? We are talking about a machine with ~600MB of memory. 2) If I revert back to the pre-RDS role, is there any legitimate way (in terms of purchasing RDS licenses) to get more than 2 concurrent desktops? I did read this, and am not questioning that the answerer is knowlegeable; but someone else may have some other experience. I am also making it clear that we want to do this in a legitimate way. Thanks in advance for any assistance that can be provided! EDIT: if it is helpful in answering the question, the application in question is a Lotus Approach database. Also, I am asking this from a technical perspective: not a legal one. I want to know if it is possible to install valid licenses without the RDS role.

    Read the article

  • Windows 7 PC freezes frequently with hard disk light constantly on

    - by Senthil
    I recently replaced a defective hard disk with a new one - Windows 7 - "A disk read error occured. Press Ctrl + Alt + Del to restart" I have been using the new hard disk with a Windows 7 installation for about 4 days. Now it has started freezing frequently. Sometimes every 2 minutes and sometimes every 10 seconds. There is lots of software installed - I am a developer and my PC is full of IDEs, database servers, web servers, developer tools, testing tools, all browsers etc.. My windows is up to date as of now. I have installed ALL updates including optional drivers etc. All my installed software is up to date. I scanned my computer using Microsoft Security Essentials and found nothing malicious. I did a chkdsk /r and found no problems. I did a memory diagnostic and found no problems. When I go into safe mode, it doesn't freeze and I am able to use it normally for longer periods of time. What other steps can I take to locate the problem?

    Read the article

  • Repairing Windows 7 boot after Ubuntu 10.10 install

    - by Ted
    I've read various threads on this after googling, including one on this site. I had Windows 7 installed on an SSD. I wanted to try Ubuntu so I created a partition for it on the SSD and booted with the live CD to install Ubuntu. Went through the install and somehow Ubuntu carved out another partition on the SSD rather than using the one I had already created. Windows 7 would then not boot but Ubuntu would. I booted with my 7 cd and ran the automatic startup repair, it didn't find any problems. I then ran the bootsect command on the drive with 7. It said it repaired the bootmgr but Windows still would not boot and now Ubuntu won't either. I read somewhere else that it may be due to the partition that 7 was on being changed during the install. I don't care about the Ubuntu installation but I don't want to lose the 7 install, can I delete the ubuntu partition through booting with the 7 cd? Will that do any good? Thank you all! I'm stumped even though I've done startup repairs before, just not after Ubuntu install.

    Read the article

< Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >