Search Results

Search found 63114 results on 2525 pages for 'set identity insert'.

Page 480/2525 | < Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >

• VMware networking - PortChannel or not?

  - by dunxd

  My ESX hosts each have 8 NICS. I have set up 2 NICs for our iSCSI SAN - each is connected to a different SAN switch. 2 NICs are set up for vMotion and Service Console - these are each connected to a different core switch (ports are trunked with VLANs dedicated to vMotion and Management) I now have four ports left over. Currently we have these set up each going into our default VLAN. Two NICs are connected to one core-switch and two are connected to the other. We decided to aggregate the connections to each switch - so they are teamed at the vswitch end, and port channelled at the physical switch end. I am now reading that port channelling these connections is not particularly useful, perhaps even over complicating things. Is there a particular problem with using port channels for VMware? What method provides the best balance between redundancy and performance?

  Read the article

• Can't get PHP Errors in IIS7.5

  - by Erling Thorkildsen

  I've tried the previously answered questions regarding this to no avail. Just installed PHP5 and IIS on my Windows 7 machine and I'm having trouble getting PHP Errors displayed instead of 500 Errors. In PHP; error_reporting = E_ALL display_errors = On In IIS I have htmlErrors set to Detailed which shows a detailed IIS 500 Error page. If set to Custom it shows a basic 500 Error page. If I set it to PassThrough I get a blank page (view-source reveals no code). My PHP log file is showing a Fatal PHP Runtime Error.

  Read the article

• Programmatically get the WLAN config of a machine and use netsh to setup new profile

  - by Maestro1024

  How can I programmatically get the wireless LAN configuration of a machine and use netsh to setup new profile? I am having trouble getting the netsh command to set the ssid of a new card. I installed the drivers and plugged it in. I see in ipconfig it says the "media is disconnected" (fair enough). I then send the following command netsh wlan connect name=profile1 ssid=myNetwork interface="Wireless Network Connection 2" problem is I get an error "There is no profile "profile1" assigned to the specified interface. What is a profile for a wireless card? What should I set it to? How can I get my SSID set and connected for the card?

  Read the article

• MySQL 5.5.9 Query Cache not working.

  - by thepearson

  I am running MySQL 5.5.9 x86_64 RPM as downloaded from mysql.com. Running on CentOS 5.5 Xen DomU. I have enabled the Query_cache however MySQL NEVER uses it. All of my tables are InnoDB. Why is the Qcache never hit? Here are my settings. mysql> SELECT VERSION(); +-----------+ | VERSION() | +-----------+ | 5.5.9 | +-----------+ 1 row in set (0.00 sec) mysql> SHOW VARIABLES LIKE '%query_cache%'; +------------------------------+-----------+ | Variable_name | Value | +------------------------------+-----------+ | have_query_cache | YES | | query_cache_limit | 2097152 | | query_cache_min_res_unit | 4096 | | query_cache_size | 536870912 | | query_cache_type | ON | | query_cache_wlock_invalidate | OFF | +------------------------------+-----------+ 6 rows in set (0.00 sec) mysql> show status like 'Qcache%'; +-------------------------+-----------+ | Variable_name | Value | +-------------------------+-----------+ | Qcache_free_blocks | 1 | | Qcache_free_memory | 536852824 | | Qcache_hits | 0 | | Qcache_inserts | 0 | | Qcache_lowmem_prunes | 0 | | Qcache_not_cached | 7665775 | | Qcache_queries_in_cache | 0 | | Qcache_total_blocks | 1 | +-------------------------+-----------+ 8 rows in set (0.00 sec)

  Read the article

• CentOS 6.5 proxy bypass/no_proxy not working

  - by Naruto Uzumaki

  I am running CentOS 6.5 on my desktop. I've set the Network Proxy using the network proxy application provided under Preferences. I've also set the following exceptions: localhost,127.0.0.0/8,172.16.0.0/12,192.168.0.0./16 But whenever I am using wget (I'm testing the proxy settings using using wget) then wget tries to connect to the proxy for private addresses, but wget localhost works fine and doesn't use the proxy. I also removed all the proxy settings and set the proxy in the shell: export http_proxy="<proxy_url>:<port>" export https_proxy="<proxy_url>:<port>" export no_proxy="localhost,127.0.0.0/8,172.16.0.0/12,192.168.0.0./16" It work when I use the command wget <external_url> or wget localhost but fails when I use the command wget <private address from the $no_proxy variable>. I also tried setting the variables in Ubuntu 14.04 also and facing the same issue. Regards,

  Read the article

• SQL Server Maintenence Plan error on an offline Database

  - by Sean Earp

  Today is SQL day for me :) I have a maintenance plan that is failing to run with the following error: Failed:(-1073548784) Executing the query "USE [SharedServices1_DB]" failed with the following error: "Database 'SharedServices1_DB' cannot be opened because it is offline.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. where SharedServices1_DB is a database that is set to offline. I would like to exclude this database from the maintenance plan, but when the database is offline, it does not show up at all as a "specific database" in the maintenance plan task, and if I bring it online, it is already unchecked in the maintenance plan task. How can I exclude an offline database from a maintenance plan?

  Read the article

• Flash Player Automatic Updater on Windows Startup

  - by Mikee

  Hi all, Adobe Flash Player is set to automatically check for updates on Windows startup. I've always wondered where exactly it is set to do this. Checking the running services, as well as msconfig does not yield its location. The message in question looks like this: http://www.technipages.com/disable-an-update-to-your-adobe-flash-player-is-available-message-forever.html I know how to disable it via Adobe's web site (instructions are included in link above), but I'm interested in knowing where exactly in Windows is this set to perform this action? I have done some research on this, and people keep saying to check the following registry locations: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce or the HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run However, I have checked those locations, and I still cannot locate where this updater is stored. I'm pretty sure that malware also uses this technique to automatically load upon startup, and since it's not in the typical location(s) that a user would look, it's well hidden. Thank you for the assistance!

  Read the article

• Why is my router assigning the wrong address via DHCP

  - by Barry

  I have a WRT54G router that is set up to serve out addresses via DHCP. It correctly serves up addresses to every other machine on the network, including another PC, my macbook when connected via wireless, my wife's notebook, and our printer. However, whenever I attach my macbook to the router via an ethernet cable, the address it is given via DHCP is wrong. My local network is set up as 192.168.1.*. However, when my macbook connects with an ethernet cable, it is given the IP 192.168.29.*. Currently, I have the macbook set up with a manual IP address, and all seems to be working fine. Any ideas on what could be causing this?

  Read the article

• How to change default permission for uploaded files in apache with mounted webroot?

  - by faridv

  I have an ubuntu server 11.10 with apache 2.2.20, php 5.3.6 and an installation of Joomla cms. I have used an extra hard disk as my web server storage and mounted it into /data/www/ (I hope it's not where my problem us!). I've set permission of all files and folders in my web root to 755 and user groups for them is set to [default ubuntu user(in my case radio)]:www-data. In past days I had serious problems with joomla not showing new uploaded images and other files and also I can't install any extensions. After hours of searching I found out that uploaded files don't have appropriate permission (they are -rw-------) and Joomla application cannot read, copy or move them after upload. I’m wondering how can I set a default permission so all files that I upload use it? PS: I’ve tested umask but it did nothing. I think it has nothing to do with my problem.

  Read the article

• Trouble with NFS file sharing on Synology 211 NAS and Ubuntu Client

  - by Aglystas

  I'm attempting to set up NFS file sharing and keep getting the error... mount.nfs: access denied by server while mounting 192.168.1.110:/myshared Here is the exact command I'm using to mount sudo mount -o nolock 192.168.1.110:/myshared /home/emiller/MyShared I have set 'Enabled NFS' in DSM and set nfs priviledges in the the Shares section of the control panel. Here is the /etc/exports entry from the NAS. volume1/myshared 192.168.1.*(rw,sync,no_wdelay,no_root_squash,insecure_locks,anonuid=0,anongid=0) I read some things about the hosts.allow and hosts.deny but it seems like if they are empty they aren't used for anything. I can see the share when I run ... showmount -e 192.168.1.110 Any help would be appreciated in this matter.

  Read the article

• Can a virtual mikrotik box bridge a hyper-v internal network with a hyper-v external network?

  - by mcfrosty

  I am trying to set up a Mikrotik router as a transparent firewall on my network. I got the machine working on a hardware MT box, but my boss wants the MT virtualized. I have been trying the set up where my virtual windows box talks to the Mikrotik via private or internal network on the Hyper-V host. I can get the two machines to talk, but as soon as I set up a bridge on the MT, all traffic ceases between the two. Is it possible to create a bridge for this purpose (having the MT silently in front of my firewalled server)? I could really use some help.

  Read the article

• Vim and mouse with ssh from Mac to Linux

  - by Jonatan Littke

  Hey. I certainly know it's possible to make the mouse work in Vim on a remote session to a Linux machine from my Mac, but I haven't figured out just how. Daily vim gives a tip on making it work but if I try to set 'mac-ansi', for example, I get an error saying I can only specify values beginning with builtin_ (riscos, beos-ansi, etc). I've tried using ssh -X, combined with set mouse=a and set term=builtin_anso for example, but with no success with or without combining them. I'm using Snow Leopard and attempting to use the mouse on a Debian machine with vim 7.1.314. I've had a look at the documentation but can't make it work. Any tips?

  Read the article

• Filemaker 10 Advanced sending email via script & SMTP

  - by Sean

  We are using a windows server box to run the databases but we have found via the headers that the emails are send from the local workstation. We have moved to a new email system and have set up a local linux server to securely send email out of our network to devices that do not support new protocols and encryption. But once we set up the script in filemaker 10 advanced (the local machine os x) we set it to the ip of our local box with no authentication but it does not send out an email. It creates a connection we see in the logs on the linux box but nothing more, additionally you can start a telnet connection with no issues. We have also made sure that there are no additional issue that we can see in our firewall policies. Any ideas where we should start? Does Filemaker 10 advanced log errors anywhere because I could not find any log files.

  Read the article

• HOw to give static ip to router from window XP LAN

  - by Captain Planet

  I have the USB modem internet connection. I am using ICS sharing in XP to share my internet connection. ON window XP LAN i have set up the LAN IP as 192.168.137.1 255.255.255.0 Now i have joined the cable from that XP LAN to another LAPTOP running vista Now if set the LAN on VISTA to get ip automatically them internet don't work but if manually set the ip to 192.168.137.3 255.255.255.0 gateway 192.168.137.1 Then my internet works But i want to join that LAN cable from XP to rouer so that i can use router to divide internet. But i don't know how i can give static ipto router because i think somehow that LAN on XP is not giving the IP address

  Read the article

• ML 350 additional SATA RAID controller (mirror only)

  - by Nicholas

  I have a Proliant ML350 G8 with two SAS raid arrays currently set up - thereby maxing the default P420i raid controller. I need to set up a large video dump space in addition to this existing set-up (for non backed up, non-critical, temporary storage). I had planned to just add a 2TB SATA disk and plug it into the motherboard. However I it occurred to me the motherboard might have built-in mirror RAID support? Therefore I could use two SATA disks and have some semblance of redundancy. Is this possible? Or would I need to get a cheap raid card? Any recommendations?

  Read the article

• How to use Active Directory's homeDirectory attribute for Samba?

  - by Shiroi98

  I currently have a Samba share setup where I would like to share Unix folders with Windows users, with Active directory as the backend. I see that there is an attribute called homeDirectory in Active Directory, but no matter what I set, Samba refuses to use that attribute (verified by doing "getent passwd") Additionally, I tried the template homedir = /home/%u in /etc/samba/smb.conf, but the problem is, some users have /home_abc/[username] while others have /home_def/[username]. That sets ALL users to /home/[username]. If I don't use the template homedir, by default it is set to /home/[DOMAIN]/[username]. Bottomline: How can I use Active directory's homeDirectory attribute to set users Home Directory in Unix/Samba? Any help greatly appreciated! :)

  Read the article

• Apache 2 Symbolic link not allowed or link target not accessible

  - by djechelon

  While the title of this question matches an already asked question, in my case I already set Options +FollowSymLinks. The setup is the following: my hosting setup includes htdocs/ directory that is the default document root for HTTP websites and htdocs-secure that is for HTTPS. They are meant for sites that need a different HTTPS version. In case both share the same files I create a link from htdocs-secure to htdocs by ln -s htdocs htdocs-secure but here comes the problem! Log still says Symbolic link not allowed or link target not accessible: /path/to/htdocs-secure Vhost fragment Header always set Strict-Transport-Security "max-age=500" DocumentRoot /path/to/htdocs-secure <Directory "/path/to/htdocs-secure"> allow from all Options +FollowSymLinks </Directory> I think it's a correct setup. The HTTP version of the site is accessible, so it doesn't look like a permission problem. How to fix this? [Add] other info: I use MPM-itk and I set AssignUserId to the owner/group of both the directories

  Read the article

• Running evrouter at boot with init.d, or after xserver starts

  - by J V

  I'm using evrouter to set up mouse button binds, and init.d to start it. My init.d file: #!/bin/bash #Simple init.d script to run evrouter ### BEGIN INIT INFO # Provides: evrouter # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Set evrouter bindings # Description: Set evrouter bindings at boot time. ### END INIT INFO config="/opt/hacks/evrouterrc" case "$1" in start|restart|reload|force-reload) evrouter -c "$config" /dev/input/event* ;; stop) echo "Evrouter is not a daemon, change settings file at '$config' and restart" ;; *) echo "Usage: $0 start" >&2 exit 3 ;; esac evrouter however complains that: evrouter: could not open display "". If evrouter requires xserver to be up, how do I get init to wait until after xserver starts to run this script? If xserver restarts will this script run automatically? Running this with sudo services evrouter start still results in this error, can init.d scripts not tell where my display is? (Not exactly familiar with init, runlevels, etc)

  Read the article

• Error 2020: Got packet bigger than 'max_allowed_packet' bytes when dumping table

  - by Imagineer

  I'm getting the above mentioned error when backing up with ZRM, which is using mysqldump for backup. mysqldump --opt --extended-insert --single-transaction --create-options --default-character-set=utf8 --user=" " -p --all-databases "/nfs/backup/mysql01/dailyrun/20091216043001/backup.sql" mysqldump: Error 2020: Got packet bigger than 'max_allowed_packet' bytes when dumping table TICKET_ATTACHMENT at row: 2286 I have increased the size for 'max_allowed_packet' to be 1G in /etc/my.cnf which is the server setting and for the client side setting I've set it by running this command: mysql -u -p --max_allowed_packet=1G And I have verified that on the client and server side they are of the same value. This is to check the client side value according to this forum posting http://forums.mysql.com/read.php?35,75794,261640 mysql SELECT @@MAX_ALLOWED_PACKET - ; +----------------------+ | @@MAX_ALLOWED_PACKET | +----------------------+ | 1073741824 | +----------------------+ 1 row in set (0.00 sec) And this is the check the server value setting. mysql SHOW VARIABLES | max_allowed_packet | 1073741824 | I have ran out of ideas, and tried searching within expert exchange and googling for solutions but so far none has worked. Reference http://dev.mysql.com/doc/refman/5.1/en/packet-too-large.html Anyone please advise, thank you.

  Read the article

• How to use iSCSI inside HyperV VM?

  - by William

  I have 2 Dell R710 servers (intended to set up HyperV cluster) and a MD3000i SAN set up: Server1/Server2: NIC 1: connected to company LAN NIC 2: crossover to the other server's NIC 2 NIC 3: crossover to iSCSI port of SAN controller 1 NIC 4: crossover to iSCSI port of SAN controller 2 I have both servers setup as diskless servers with iSCSI boot from SAN without problem. But how can I access iSCSI from within the VM such that I can set up clustering inbetween the VMs? I can ping from the host to the SAN but found that NIC3/4 cannot be used for virtual network in HyperV? What am I doing wrong?

  Read the article

• Remotely managing Hyper-V VMs from Windows 8 Client

  - by Vazgen

  Currently, I have a core Hyper-V Server hosting VMs for a domain controller and several domain-joined VDI infrastructure servers. The VMs are connected in that domain environment, but the remote management of the physical Hyper-V Server is set up using the same WORKGROUP (as the Windows 8 client I'm managing from) This makes it cumbersome to manage the VMs hosted on the physical server from my remote management Windows 8 client because I can only connect to the physical Hyper-V server and not the individual VMs hosted inside. Can I make my set up more flexible by hosting a second domain controller in a VM hosted on my Windows 8 machine and switching my remote management set up to use the same domain through? Meaning ALL physical and virtual machines including the VDI infrastructure under the same domain? I'm new to this just looking for some suggestions.

  Read the article

• Wireless Repeating with two Netgear N750 (WNDR4300)

  - by jomo1911

  I have a Netgear N750 as my main router, which connects to the internet via a modem. I have a second Netgear N750 which I want to use to repeat the wireless signal of the main router. I logged in to routerlogin of my main router (192.168.1.1) and set up the "Wireless Repeating Function". I set it as the "Wireless Base Station" and filled in the MAC adress of my second Netgear N750. Then I logged in to routerlogin of my second router and set it up as the "Wireless Repeater", I gave it the IP 192.168.1.11 and filled in the MAC adress of the base station. During the setup of the second router (Repeater) I had to disable all security functions. If I connect to the repeaters' WLAN signal, I get no internet connection. Maybe you can help me, thanks

  Read the article

• Inconsistent black levels in windows 7 media center

  - by James G

  I've got a HTPC running windows 7 64bit, hooked up to a Samsung LCD TV. My problem is different types of video are displaying different black levels on the TV. When I play a bluray through Arcsoft Total Media Theater I have to set the "HDMI Black Level" to "normal" in the TV picture options menu. When I play recorded TV through WMC I have to set it to "low" otherwise the black colors on the video are washed out and grey. Is there any way to configure the system so all videos are displayed with the same black level? The hdmi black level setting is deep in Samsung's menus so it's becoming a chore to keep switching it everytime I watch a different type of video. I'm using an ATI 4670 graphics card with HDMI output going straight to the TV. In the ATI catalyst control center I've got pixel format set to RGB 4:4:4 (Full RGB) since the TV wont allow me to change the HDMI black level if I choose one of the other settings.

  Read the article

• Dual booting Windows and Arch Linux (with GRUB2) - after using Windows, Windows Boot Manager made first in boot priority list

  - by louis058

  I am dual booting Windows 7 and Arch Linux (both 64bit), with GRUB2, using the 64-bit EFI version. I partitioned my drive into a GPT drive and installed Windows first according to this guide. I then installed Arch Linux using the Beginner's Guide, installing grub2-efi-x86_64 in the process. Everything is working fine now, but with one problem. I can set the boot priority in BIOS (or is it UEFI?) to have GRUB boot try and boot before Windows Boot Manager. Then I chainload Windows Boot Manager using GRUB. However, when I actually use Windows in this manner, upon shutting down and turning on again, or rebooting, Windows seems to set Windows Boot Manager first in the priority list again, with the result being I have to manually set GRUB again, or I can't boot into Linux. My motherboard is an Asrock H61M/USB3, if that helps. I want to know how to turn off this behaviour.

  Read the article

• Problem with Jumbo Frames

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: * D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU * Synology DS107+, Firmware 3.0-1337 * Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

< Previous Page | 476 477 478 479 480 481 482 483 484 485 486 487  | Next Page >