Search Results

Search found 14828 results on 594 pages for 'settings py'.

Page 481/594 | < Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >

  • Limit bandwith on network of computers

    - by Joseph34123
    We have network in office of approximately 10 computers sometimes when someone downloads something for work (e.g. syncing email with an attachment or Dropbox), everyone slows down. I could limit each computer in office but the problem is that we have an open WiFi network, and I cannot access the computers that use it. We have one main DSL router "Netopia 3347" and another router connected to it on wire for public wifi is "Linksys WRT110". I cannot change the setup we have and don't want to. There's 2 approaches here: Set office computers download limit in each computer and then I need to find out how I can set a download limit for the wifi network such as in the router settings. It's a Linksys router and I did not see the option for this, so maybe I need new router for WiFi? Don't bother with each computer and put some "specific hardware" or another computer before router so all traffic goes trough it and I can then assign priority maximum speed for each IP address. Question is what hardware do I need?

    Read the article

  • Nexus functionality is limited after installation

    - by Dmitriy Sukharev
    I have a CentOS based server with Sonatype Nexus 2.0.4-1 installed. The issue is that there are no standard "Artifact Search", "Advanced Search", "Browse Index", "Refresh Index" Nexus features, as well as Artifact Information tab after selection of any artifact (only Maven Information tab). I tried to Google, but was amazed that there're no information about this issue. Actually it looks like all actions I've done are: wget http://www.sonatype.org/downloads/nexus-2.0.4-1-bundle.tar.gz tar -xvf nexus-2.0.4-1-bundle.tar.gz cp -r nexus-2.0.4-1 sonatype-work /opt/ ln -s /opt/nexus-2.0.4-1/* /opt/nexus ln /opt/nexus/bin/nexus /etc/init.d/ chmod 755 /etc/init.d/nexus vim /etc/init.d/nexus NEXUS_HOME=“/opt/nexus” RUN_AS_USER=“nexus” useradd -s /sbin/nologin -d /var/lib/nexus nexus chown -R nexus /opt/nexus/ chown -R nexus /opt/nexus-2.0.4-1/ sudo -u nexus cp /opt/nexus/conf/examples/proxy-https/jetty.xml /opt/nexus/conf/ To force Nexus be available through HTTPS I went to Administration - Server - Application Server Settings as admin and changed Base URL to https:// external IP/nexus and set Force Base URL to true. Any ideas how to get missed Nexus features?

    Read the article

  • Updated XAMPP with MySQL, all my tables are missing

    - by user371699
    I just updated XAMPP to a newer version, which included updating MySQL from 5.5 to 5.6. Using phpMyAdmin, however, all of my tables within my databases still appear on the left navigation panel, but the main window shows that all my databases are empty (except for information_schema, and a couple other default tables.) Clicking on a table in the navigation panel gives me a "table doesn't exist" message. It does looks like information_schema.tables doesn't have my tables, either. Can anyone assist me with this? I did make a complete backup of all my databases before the upgrade, but I first want to see if I can fix this the "normal" way. Furthermore, I'm not sure if the MySQL upgrade involved making changes to the information/performance databases, so I don't know if I can restore the old ones. Thank you. EDIT: Continuing my searching, I realized that only the INNODB databases are missing. I've tried running the following with no avail: /opt/lampp/bin $ sudo ./mysql_install_db --basedir=/opt/lampp and /opt/lampp/bin $ sudo ./mysql_install_db --basedir=/opt/lampp --datadir=/opt/lampp/var/mysql The my.cnf file in /opt/lampp/etc contains the following InnoDB settings: innodb_data_home_dir = /opt/lampp/var/mysql/ innodb_data_file_path = ibdata1:10M:autoextend innodb_log_group_home_dir = /opt/lampp/var/mysql/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high innodb_buffer_pool_size = 16M # Deprecated in 5.6 #innodb_additional_mem_pool_size = 2M # Set .._log_file_size to 25 % of buffer pool size innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 1 innodb_lock_wait_timeout = 50 What could possibly be wrong? Why is the information_schema not updating correctly? It looks like /opt/lampp/var/mysql has all my tables in it within the database directories, but they're still not showing up in information_schema.

    Read the article

  • Having trouble setting up my router

    - by indyK1ng
    I just moved into my apartment and the Internet connection is working. It's Comcast in case that matters. Anyway, I'm having trouble setting up my wireless router (Netgear WNR2000) to work with it. Are there any settings that I could be missing? I currently have it set up to use a static IP address and I found the DNS servers I'm supposed to use and the Internet light is green, but I can't get out to the Internet. When I am trying, I'm connecting to an Ethernet port on the back of my router. Is there a setting I'm missing or a setting that I have set wrong? I used the automatic set up wizard to learn that it's a static IP address. Any help would be appreciated. I am currently only able to use my Linux machine, so please make any help in Linux commands. Yes, I can connect to the Internet if I connect to the modem directly and I've been using the web interface when I'm connected to the router, so I suppose I can ping the router. My router detected the connection as using a static IP address, so I connected to the modem directly and figured out what my IP address, gateway, and mask were as well as DNS servers.

    Read the article

  • What keeps you from changing your public IP address and wreak havok?

    - by Whitemage
    An interesting question was asked to me and I did not know what to answer.. So I'll ask here. Let's say I subscribed to an ISP and I'm using cable internet access. ISP gives me a public IP address of 60.61.62.63. What keeps me from changing this IP address to, let's say, 60.61.62.75 and mess with another consumer's internet access? For the sake of this argument, let's say that this other IP address is also owned by the same ISP. Also, let's assume that it's possible for me to go into the cable modem settings and manually change the IP address. Under a business contract where you are allocated static addresses, you are also assigned a default gaetway, a network address and a broadcast address. So that's 3 addresses the ISP "loses" to you. That seems very wastefull for dynamically assigned IP addresses where the majority of customers are.. Could they simply be using static arps? ACLs? Other simple mechanisms? Anyone who worked at an ISP would be willing to explain this a bit?

    Read the article

  • I flashed my DS4700 with a 7 series firmware, now my DS4300 cannot read the disks I moved to that lo

    - by Daniel Hoeving
    In preparation for adding a number of 1Tb SATA disks to our DS4700 I flashed the controller firmware from a 6 series (which only supports up to 2Tb logical drives) to a 7 series (which supports larger than 2Tb logical drives). Attached to this DS4700 was a EXP710 expansion drawer that we had planned to migrate out to our co-location to allieviate the storage issues we were having there. Unfortunately these two projects were planned in isolation to one another so I was at the time unaware of the issue that this would cause. Prior to migrating the drawer I was reading the "IBM TotalStorage DS4000 EXP700 and EXP710 Storage Expansion EnclosuresInstallation, User’s, and Maintenance Guide" and discovered this: Controller firmware 6.xx or earlier has a different metadata (DACstore) data structure than controller firmware 7.xx.xx.xx. Metadata consists of the array and logical drive configuration data. These two metadata data structures are not interchangeable. When powered up and in Optimal state, the storage subsystem with controller firmware level 7.xx.xx.xx can convert the metadata from the drives configured in storage subsystems with controller firmware level 6.xx or earlier to controller firmware level 7.xx.xx.xx metadata data structure. However, the storage subsystem with controller firmware level 6.xx or earlier cannot read the metadata from the drives configured in storage subsystems with controller firmware level 7.xx.xx.xx or later. I had assumed that if I deleted the logical drives and array information on the EXP710 prior to migrating it to the DS4300 (6.60.22 firmware) this would satisfy the above, unfortunately I was wrong. So my question is a) Is it possible to restore the DAC information to its factory settings, b) What tool(s) would I use to accomplish this, or c) is this a lost cause? Daniel.

    Read the article

  • JBoss7 load balancing with mod_proxy_balancer - session not working

    - by Phil P.
    I am trying to set up mod_proxy_balancer for routing requests to 2 jboss7-servers. For the time being I am testing this setup on my local machine, using following config in httpd.conf: ProxyRequests Off <Proxy \*> Order deny,allow Deny from all </Proxy> ProxyPass / balancer://mycluster/ stickysession=JSESSIONID|jsessionid scolonpathdelim=On <Proxy balancer://mycluster> BalancerMember http://localhost:8080 route=node1 BalancerMember http://localhost:8081 route=node2 Order allow,deny Allow from all </Proxy> and in the standalone.xml file of each jboss I have defined the jvmRoute system property: <system-properties> <property name="jvmRoute" value="node1"/> </system-properties> At http:// localhost/myapp the application is accessible but the java-session is not build up correctly. Consequently the authentication is not working. The funny thing is, that everything is working if I turn off one JBoss-instance. As I have tried a couple of settings already, I am thankful for any further suggestions.

    Read the article

  • WS 2008 R2 giving "Internal Server Error"

    - by dragon112
    I have had this problem for a while now and can't find the problem at all. When i open a page it will sometimes give a 500 Internal Server Error message. This hapens on a website that works perfectly but when i try to upload anything it will give this message(all php settings have been set to either 1gb or 3000 seconds as well as the iis headers). Also when i open a simple page which does nothing more than include another php page and include a couple of classes the error will occur. I have no idea what causes this error and would love to hear from any of you on what this could be. I checked the server logs and for the upload issue i found this error: The description for Event ID 1 from source named cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: managed-keys-zone ./IN: loading from master file managed-keys.bind failed: file not found the message resource is present but the message is not found in the string/message table Regards, Dragon

    Read the article

  • Instant connection to wireless network but delayed internet access on Mediacom with Windows 7

    - by David
    I have Mediacom cable internet and their provided modem/wireless router a Cisco DPC3825. Each of the laptops experiencing the trouble have Windows 7 64-bit. When connecting to the wireless network each computer will take a second or two to connect and then toggle from "no internet access" to "internet access" however, no websites are accessible for about five minutes after connecting. After that, there aren't any problems. It happens on all 3 of the laptops I have available and none of them have problems on any other network. It seems like my phone doesn't have the delay issue when it connects. I've power cycled the modem/router along with a DNS flush. I have some of the DNS servers manually set to Google DNS addresses and one just default. I've contacted and had Mediacom support try all its tricks. They changed the SSID and password along with resetting the thing remotely a handful of times. It was installed just this month and seemed to pass the tech's checks upon installation. Nothing in the settings has been changed, but it's been exhibiting this problem from the get go. This guy seems to be having the same problem, but no solution was posted. http://www.dslreports.com/forum/r27372861-IA-Connection-to-Mediacom-wireless-Modem-no-internet- Help greatly appreciated.

    Read the article

  • On Windows XP, Start > Run "My Documents" sometimes doesn't work

    - by Clayton Hughes
    On all of my home computers, I can enter "my documents" into the Start Run prompt and the My Documents folder of the current profile will open up. What's more, I can continue typing subfolders, files, etc. and auto-complete works and it's smart and enjoyable. I can't check at the moment, but I'm almost positive entries like "My Pictures" and "My Music" also go to their correct folders. On my work computers, if I enter "my documents" into the Start Run prompt, I get the following error: "Windows cannot find 'my'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start Button, and then click Search." I can sort of circumvent this by creating a shortcut in my PATH named 'my' that points to My Documents folder, but this doesn't solve the auto-complete option (and it's otherwise imperfect, of course, because "my pictures" or "my music" all direct to the same place. A google search doesn't provide much help on this, although it does identify a poster in 2007 with this same question at another board: http://www.msfn.org/board/lofiversion/index.php/t124813.html (Login required, but Google cache available here: http://preview.tinyurl.com/ygxhwwl) Is this just a limitation of the networks belonging to a domain, or is there some way I can get this functionality back? My documents folder does live in the standard place (C:\Documents and Settings{username}\My Documents), and not on a network drive or anything. It's probably worth adding that the computers are part of some freakish Novell domain thing, too. I'm not in IT here so I'm not too up on the details. Thanks for any help/suggestions!

    Read the article

  • Networking DOS within Windows 7 XP Mode, with a Windows XP/7 Networked Share

    - by theonlylos
    For awhile now, one of my clients has been stuck with Corel Paradox 4.0 (it used to be the biggest database system in the DOS days, until Microsoft released Access in the early 90's) so for awhile I've managed to keep it on life support on Windows XP for a few years, however since switching to Windows 7 x64, I've had to resort to using XP Mode as the sandbox to keep it up and running. While I am able to run Paradox as usual in XP Mode, I'm having a serious issue where if I try connecting the install to the network share (which is located on the Windows 7 portion of the system), Paradox keeps exiting because it says the serial number is invalid. Now, I know for a fact that this is an issue with the virtual loopback adapter and also having the VM linked to the physical ethernet adapter -- and while I have solved this issue before, most of my fixes have been bandages since after a few weeks the issue pops up again. Long story short, I wanted to ask if there is a permanent way to link a DOS program to a network share address. For example, when I try doing \tsclient\paradox (the Windows 7 Address) I keep getting an error saying I need a valid network address. I've tried mapping that folder to various drive letters such as P:\Paradox -- but for some reason that keeps failing over time. For what it's worth, Paradox uses a .SOM file to store the network settings, however it isn't editable in Notepad but rather it's controlled by a wizard in Paradox. But if that extension rings any bells, I'd welcome any insights.

    Read the article

  • Give back full control to a user on a disk from another computer

    - by Foghorn
    I have my friend's hard drive mounted externally. After messing with the permissions with TAKEOWN so I could fix some viruses, I have full control over their drive. The problem is, now it's stuck in a "autochk not found" reboot sequence. I think the problem is that the boot sector is invisible to the drive now. So my question is, How can I use icacls to give back the full ownership, when the user I am giving it to is not on my machine? I ran the TAKEOWN command from my windows 7 laptop, their machine is a windows xp Professional with three partitions, I only altered the one that has the boot sector. Here is the permissions that icacls shows: (Where my computer is %System% my username is ME, and the drive is E:\ C:\Users\ME icacls E:\* E:\$RECYCLE.BIN %System%\ME:(OI)(CI)(F) Mandatory Label\Low Mandatory Level:(OI)(CI)(IO)(NW) E:\ALLDATAW %System%\ME:(I)(OI)(CI)(F) E:\alrt_200.data %System%\ME:(OI)(CI)(F) E:\AUTOEXEC.BAT %System%\ME:(OI)(CI)(F) E:\AZ Commercial %System%\ME:(I)(OI)(CI)(F) E:\boot.ini %System%\ME:(OI)(CI)(F) E:\Config.Msi %System%\ME:(I)(OI)(CI)(F) E:\CONFIG.SYS %System%\ME:(OI)(CI)(F) E:\Documents and Settings %System%\ME:(I)(OI)(CI)(F) E:\IO.SYS %System%\ME:(OI)(CI)(F) E:\Mitchell1 %System%\ME:(I)(OI)(CI)(F) E:\MSDOS.SYS %System%\ME:(OI)(CI)(F) E:\MSOCache %System%\ME:(I)(OI)(CI)(F) E:\NTDClient.log %System%\ME:(OI)(CI)(F) E:\NTDETECT.COM %System%\ME:(OI)(CI)(F) E:\ntldr %System%\ME:(OI)(CI)(F) E:\pagefile.sys %System%\ME:(OI)(CI)(F) E:\Program Files %System%\ME:(I)(OI)(CI)(F) E:\RECYCLER %System%\ME:(I)(OI)(CI)(F) E:\RHDSetup.log %System%\ME:(OI)(CI)(F) E:\System Volume Information %System%\ME:(I)(OI)(CI)(F) E:\WINDOWS %System%\ME:(I)(OI)(CI)(F) Successfully processed 22 files; Failed processing 0 files C:\Users\ME

    Read the article

  • PHP & IIS 6 Encoding problem

    - by Alexander
    The server is running Windows 2003 with IIS 6.0.3790.1830 x86 (iis.dll). My database server is Microsoft SQL Server 2000. My PHP version is 5.3. The original application is hosted on appserv1 and it's database is on dbserv1. It's working fine, everything is tuned up, running great. It was needed to place the same application (different modules) on another server, for other uses, so I copied the database on dbserv2, configured appserv2 to host the application, so I achieved 2 almost identical copies. Both dbserv1 and dbserv2 use the same encoding, both appserv1 and appserv2 are on IIS6 with the same PHP configurations. I also tried my best to have the same settings in the IIS. I also made sure that I pass the encoding information both in the HTTP headers and in the meta tags with http-equiv. Both applications use utf-8. The Problem is that the copy of the application doesn't display the non-ASCII characters normally in the browser, even if the browser detects correctly the UTF-8 encoding of the page. First I thought it was a database issue, given the fact that MSSQL 2000 doesn't support UTF-8, and instead it uses UCS-2, but when I redirected the application on appserv2 to work with the database on dbserv1, it had the same encoding problems. This is why I am asking in what way I can make it work. thank you for reading.

    Read the article

  • Communicating via Command Mode with IBM HS22 IMM via AMM

    - by MikeyB
    On previous model blades that contained a BMC, I was able to communicate from our external management station via pass-through commands to the BMC to do things such as power blades on/off, set VPD parameters, reboot the BMC, etc. Now on the HS22, a bunch of things happen differently. For example, we can no longer use the same pass-through commands to write VPD information pages and have them persist across reboots of the IMM - it looks as though those VPD pages are populated from information contained in the IMM. How do we use the Advanced Settings Utility from an external host to communicate with HS22 IMMs? Alternatively, what TCP Command Mode commands do we need to send to the AMM to communicate with the IMM? For our purposes, we specifically cannot communicate with the IMM from the blade itself. Specific example: When I send a pass-thru IPMI command via the AMM to the blade BMC to write information (such as MTM, Serial) into VPD page 0x10, it persists on blades with a BMC (HS21 for example). I can send the same IPMI command to write data to the VPD page on the HS22, however it does not persist across reboots of the IMM. What IPMI commands do I need to send to the IMM? What IPMI commands are asu sending when it sets the MTM & Serial?

    Read the article

  • Connecting to MySQL Server from PHP Command Line (MAMP)

    - by Austin White
    First of all, I'm using Mac OSX 1.6, MAMP 1.9, PHP 5.3.4, and MySQL 5.1.44. I'm in the process of setting up a video encoding service for a site using Chris Boulton's PHP-Resque and Redis. Once the worker process is fired and the videos have been encoded, I need to save their locations to a mysql database. The php script is being run from the shell, so that is where the issue begins. I import the mysql settings and when it attempts to connect, I get the following errors: Warning: mysqli::mysqli(): php_network_getaddresses: getaddrinfo failed: nodename nor servname provided, or not known in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::mysqli(): [2002] php_network_getaddresses: getaddrinfo failed: nodename nor servn (trying to connect via tcp://MYSQL_SERVER:3306) in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::mysqli(): (HY000/2002): php_network_getaddresses: getaddrinfo failed: nodename nor servname provided, or not known in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::set_charset(): Couldn't fetch MySQLi_Extended in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 32 I realize that the error is occurring because it's trying to connect to tcp://MYSQL_SERVER:3306, when MySQL is on port 8889. I've been reading about Mac OSX and MAMP errors regarding the mysql.sock and I've gone through multiple forums and tried various fixes, but none have worked. I've tried PATH=/Applications/MAMP/Library/bin/:/Applications/MAMP/bin/php5.3/bin/:/opt/local/bin:/opt/local/sbin:$PATH and sudo ln -s /Applications/MAMP/tmp/mysql/mysql.sock /tmp/mysql.sock but neither have worked. I even ran a search on my machine for "3306" to find where it's being set, but because that's the normal default, I'm guessing it's not being set explicitly. Any clues on how to fix this rather challenging error?

    Read the article

  • Network Explorer Intermittently Fails to Display all Computers in Work Group

    - by graf_ignotiev
    I run a small computer lab of 10 computers and occasionally, when using the network explorer (a.k.a Network Browser) some or all of the remote computers will fail to appear. If I try to access a remote computer by its name I get an unspecified error (code 0x80004005), but I am still able to access it with the computer's IP address. The strangest part is that the problem will inexplicably go away after waiting awhile. Each computer is running Windows 7 x64 Enterprise and has identical hardware, software and configuration. They are all on the same subnet and in the same workgroup. I've spent days researching the problem and have tried the following solutions: Updated the BIOS, chipset and network adapter drivers Changed Power Settings in Network Adapter Properties so that the computer will not turn it off Disabled the Computer Browser service Changed the DHCP node type to broadcast Reviewed the Event Viewer logs Steps 3 and 4 have seemed to help the problem a little bit, but not completely. I'm beginning to suspect that the problem might lie with our router which is a ZyXEL ZyWALL 2WG, as the packets sent by Network Discovery may not be returning in time, but I wanted to get some perspective in the issue before I went any further.

    Read the article

  • Passenger throwing undefined method `-@' for "master":String after Puppet 3.0.0 upgrade

    - by Andy Shinn
    My Puppet master is using Passenger to serve. After upgrading to Puppet 3.0.0 I am getting the following error: [ pid=17576 thr=70231398486460 file=utils.rb:176 time=2012-10-01 17:37:12.892 ]: *** Exception NoMethodError in PhusionPassenger::Rack::ApplicationSpawner (undefined method `-@' for "master":String) (process 17576, thread #): from config.ru:7 from /usr/lib/ruby/gems/1.8/gems/rack-1.4.1/lib/rack/builder.rb:51:in `instance_eval' from /usr/lib/ruby/gems/1.8/gems/rack-1.4.1/lib/rack/builder.rb:51:in `initialize' from config.ru:1:in `new' from config.ru:1 My config.ru is as follows: # a config.ru, for use with every rack-compatible webserver. # SSL needs to be handled outside this, though. # if puppet is not in your RUBYLIB: # $LOAD_PATH.unshift('/opt/puppet/lib') $0 = "master" # if you want debugging: # ARGV << "--debug" ARGV << "--rack" # Rack applications typically don't start as root. Set --confdir to prevent # reading configuration from ~/.puppet/puppet.conf ARGV << "--confdir" << "/etc/puppet" # NOTE: it's unfortunate that we have to use the "CommandLine" class # here to launch the app, but it contains some initialization logic # (such as triggering the parsing of the config file) that is very # important. We should do something less nasty here when we've # gotten our API and settings initialization logic cleaned up. # # Also note that the "$0 = master" line up near the top here is # the magic that allows the CommandLine class to know that it's # supposed to be running master. # # --cprice 2012-05-22 require 'puppet/util/command_line' # we're usually running inside a Rack::Builder.new {} block, # therefore we need to call run *here*. run Puppet::Util::CommandLine.new.execute Any idea what may be happening?

    Read the article

  • .htm pages working but .aspx pages throwing errors

    - by Mike
    Our site has thousands of visitors per day but we've been receiving reports from some of our members that they are able to hit our main page, presumably because it's a .htm page, but when they click off to a .aspx page, they get an error. I've done as much research as I know how and here is what I have come up with: - We have not made any changes to IIS on our server in months. - We have a couple of customers that have been willing to work with us and provide information about their system. One customer is running Vista, the other is running XP. - We had one of the customers test both Firefox and MSIE. She gets same error in both. - One customer said, "We were able to post the profile and searched on available jobs and it worked w/ Firefox for a day, then it just quit working...we did not change any settings to Firefox after we posted the profile." - We asked the customer to clear their cache and try again. They responded with, "We just cleared the cache and got the same error; btw, I periodically clear the cache -- almost every day." Summary We have thousands of customers that hit our site with no problem. We can't reproduce these errors. These customers are getting the same error in different browsers. They are only getting the error on .aspx pages. They still get the error after clearing their cache. We would appreciate any thoughts on what other questions we could ask these customers or thoughts on how we can further troubleshoot this problem.

    Read the article

  • adding trac to apache2 configuration file

    - by Michael
    I currently have apache2 running from a mythtv/mythweb install. This made two config files available in sites-enabled. One of them ("default-mythbuntu") has the VirtualHost directive and seems like a normal file (except a change to the directory index). There is also a mythweb.conf file that only has directives and sets various variables for mythweb. I want to host a trac site as well. According to this site: http://trac.edgewall.org/wiki/TracOnUbuntu there are some setting I need to set for the Trac site. They give me directions for making a VirtualHost, but I think I should use the current VirtualHost and just add the directives (I'll need to change the default location they point to from the site above to just point to the trac location). Where should I put these directives? Can I make a Trac.conf with just the settings for Trac and enable it, or do I need to put them in the default-mythbuntu file? I don't like that later because it doesn't separate out the Trac configs. How does Apache know that the mythweb (and the trac.conf I want to make) belong to the virtualhost defined in the default-mythbuntu? It is the only virtualhost that is being defined on my system if that matters.

    Read the article

  • Rebinding Keys on a Dell Keyboard

    - by Maarx
    I have a Dell Multimedia Keyboard, similar to this one: It has many non-standard keys, like the small circular ones across the top, and the "Multimedia" keys above INSERT/HOME/PAGE_UP. They can be rebound through simple registry entries. Some sample ones are included below: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\15] "ShellExecute"="C:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe http://mail.google.com/mail/#inbox" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\16] "Association"=".cda" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17] "ShellExecute"="C:\\Windows\\System32\\SnippingTool.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\18] "ShellExecute"="calc.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7] "Association"="http" I've rebound the "MAIL" key to, instead of booting Outlook, to booting Firefox directed at my G-Mail account. I've rebound the button that would normally open "MY COMPUTER" to instead boot the Windows 7 "Snipping Tool", something I find very useful. Now, I'm looking to do some other things that I don't already know how to do. Note that answering this question doesn't necessarily require any knowledge about the keyboard or rebinding the keys: I can add, for any given key, a "ShellExecute" entry, and it will simply execute the following command as if it was typed at a Command Prompt. (I'm aware I dumbed that down rather significantly, but bear with me. I'm not really a Windows guy myself.) I use the volume knob for it's intended purpose, to change volume. I would like to change, however, a different key, to "reset" the Windows volume level back to exactly 50%, or, as it refers to it, "50", on it's 0-100 scale. I'm looking for the "program" (what I would type at a command prompt? these are still just Sys32 programs in the PATH, aren't they?) that, I imagine, would take arguments, to change Sound/Volume settings under Windows 7. Perhaps, for clarification, something that might take the form "C: SetVolume -slevel 50" or something.

    Read the article

  • error creating MS Exchange distribution list: Active directory response: 00000005: SecErr: DSID-031521D0

    - by BabakBani
    We've migrated a client from google apps to an MS Exchange 2010 SP2 on-premise setup. The setup /prepareAD went well, and the software was installed with the Administrator account. We've used the Exchange Management Console to setup mailboxes and had to google up the appropriate workarounds such as going into each users Advanced Security Settings and selecting "include inheritable permissions from this object's parents", and changing their logon-to from specific machines to "all computers" so that they can connect to Outlook Web Access, and in turn so their Outlook 2007-2010 clients can connect to Exchange. Sending and receiving emails are working well. Now that all this is in place, we can create Dynamic Distrubution Lists with no problem, but as soon as we try and create a DISTRIBUTION LIST, either in the EMC or the Exchange PowerShell, we get an error. As the error message in the powershell is more verbose, I include this if anyone can suggest how we remedy this: [PS] C:\Windows\system32new-DistributionGroup -Name 'projects' -SamAccountName 'projects' -Alias 'projects' Active Directory operation failed on DC.cppe.local. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 + CategoryInfo : NotSpecified: (0:Int32) [New-DistributionGroup], ADOperationException + FullyQualifiedErrorId : 1EA5CD3E,Microsoft.Exchange.Management.RecipientTasks.NewDistributionGroup

    Read the article

  • Unable to connect to FTP server using Filezilla with router in-between

    - by pkswatch
    While connecting to my web server using filezilla, i am getting this error: Status: Resolving address of ftp.mysite.org.in Status: Connecting to 199.199.199.18:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 150 allowed. Response: 220-Local time is now 17:58. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 5 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server did not properly shut down TLS connection Error: Could not connect to server I use a cradlepoint CTR35 wifi router to connect to the wired internet connection. When i connect to the same server without this router, the connection works flawlessly. So i guess there is some problem with my router firewall settings, but i dont know what! Can somebody help me out please? Note: The server requires EXPLICIT FTP OVER TLS and does not work with plain FTP sessions. And i can connect to other servers using plain FTP with the router in between.

    Read the article

  • Nginx + uWSGI + Django performance stuck on 100rq/s

    - by dancio
    I have configured Nginx with uWSGI and Django on CentOS 6 x64 (3.06GHz i3 540, 4GB), which should easily handle 2500 rq/s but when I run ab test ( ab -n 1000 -c 100 ) performance stops at 92 - 100 rq/s. Nginx: user nginx; worker_processes 2; events { worker_connections 2048; use epoll; } uWSGI: Emperor /usr/sbin/uwsgi --master --no-orphans --pythonpath /var/python --emperor /var/python/*/uwsgi.ini [uwsgi] socket = 127.0.0.2:3031 master = true processes = 5 env = DJANGO_SETTINGS_MODULE=x.settings env = HTTPS=on module = django.core.handlers.wsgi:WSGIHandler() disable-logging = true catch-exceptions = false post-buffering = 8192 harakiri = 30 harakiri-verbose = true vacuum = true listen = 500 optimize = 2 sysclt changes: # Increase TCP max buffer size setable using setsockopt() net.ipv4.tcp_rmem = 4096 87380 8388608 net.ipv4.tcp_wmem = 4096 87380 8388608 net.core.rmem_max = 8388608 net.core.wmem_max = 8388608 net.core.netdev_max_backlog = 5000 net.ipv4.tcp_max_syn_backlog = 5000 net.ipv4.tcp_window_scaling = 1 net.core.somaxconn = 2048 # Avoid a smurf attack net.ipv4.icmp_echo_ignore_broadcasts = 1 # Optimization for port usefor LBs # Increase system file descriptor limit fs.file-max = 65535 I did sysctl -p to enable changes. Idle server info: top - 13:34:58 up 102 days, 18:35, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 118 total, 1 running, 117 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3983068k total, 2125088k used, 1857980k free, 262528k buffers Swap: 2104504k total, 0k used, 2104504k free, 606996k cached free -m total used free shared buffers cached Mem: 3889 2075 1814 0 256 592 -/+ buffers/cache: 1226 2663 Swap: 2055 0 2055 **During the test:** top - 13:45:21 up 102 days, 18:46, 1 user, load average: 3.73, 1.51, 0.58 Tasks: 122 total, 8 running, 114 sleeping, 0 stopped, 0 zombie Cpu(s): 93.5%us, 5.2%sy, 0.0%ni, 0.2%id, 0.0%wa, 0.1%hi, 1.1%si, 0.0%st Mem: 3983068k total, 2127564k used, 1855504k free, 262580k buffers Swap: 2104504k total, 0k used, 2104504k free, 608760k cached free -m total used free shared buffers cached Mem: 3889 2125 1763 0 256 595 -/+ buffers/cache: 1274 2615 Swap: 2055 0 2055 iotop 30141 be/4 nginx 0.00 B/s 7.78 K/s 0.00 % 0.00 % nginx: wo~er process Where is the bottleneck ? Or what am I doing wrong ?

    Read the article

  • With WebMatrix, How do I Connect to a MySQL Database on a Colleague's Machine?

    - by Ash Clarke
    I have scoured Google trying to discover how to do this, but essentially I want to connect to a colleague's MySQL database for working together on a Wordpress installation. I am having no luck and keep getting an error about the connection not being possible: Unable to connect to any of the specified MySQL hosts. MySql.Data.MySqlClient.MySqlException (0x80004005): Unable to connect to any of the specified MySQL hosts. at MySql.Data.MySqlClient.NativeDriver.Open() at MySql.Data.MySqlClient.Driver.Open() at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings) at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection() at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver() at MySql.Data.MySqlClient.MySqlPool.GetConnection() at MySql.Data.MySqlClient.MySqlConnection.Open() at Microsoft.WebMatrix.DatabaseManager.MySqlDatabase.MySqlDatabaseProvider.TestConnection(String connectionString) at Microsoft.WebMatrix.DatabaseManager.IisDbManagerModuleService.TestConnection(DatabaseConnection databaseConnection, String configPathState) at Microsoft.WebMatrix.DatabaseManager.Client.ClientConnection.Test(ManagementConfigurationPath configPath) at Microsoft.WebMatrix.DatabaseManager.Client.DatabaseHierarchyInfo.EnsureLoaded() The connection details are copied from my colleague's connection string, with the exception of the server being modified to match the IP address of his machine. I'm not sure if there is a firewall port I have to open or a configuration file I have to modify, but I'm not having much luck so far. (There is a strong chance that, by default, web matrix / iis express doesn't set the mysql database it creates to accept remote connections. If anyone knows how to change this, that would be grand!) Anyone have any ideas?

    Read the article

  • Xorg eating up too much RAM on Ubuntu 9.10 box

    - by Yang
    Xorg is eating up 444MB of 2GB total RAM on my Ubuntu 9.10 x86_64 machine with nvidia drivers installed for the nvidia G86 (GeForce 8300 GS). top shows: top - 18:21:41 up 6 days, 2:40, 9 users, load average: 0.46, 1.12, 1.22 Tasks: 266 total, 3 running, 262 sleeping, 1 stopped, 0 zombie Cpu(s): 8.4%us, 2.0%sy, 0.0%ni, 89.1%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2055736k total, 1965136k used, 90600k free, 3952k buffers Swap: 979924k total, 979908k used, 16k free, 102636k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1432 root 20 0 1154m 442m 7492 S 8 22.0 32:56.97 Xorg 18462 yang 20 0 1001m 219m 8356 S 0 10.9 5:13.25 chrome 24099 yang 20 0 865m 83m 13m S 0 4.2 0:06.91 chrome xrestop shows: xrestop - Display: :0.0 Monitoring 47 clients. XErrors: 0 Pixmaps: 40430K total, Other: 142K total, All: 40573K total res-base Wins GCs Fnts Pxms Misc Pxm mem Other Total PID Identifier 1c00000 21 46 1 19 697 9128K 18K 9146K 3169 x-nautilus-desktop 1000000 4 3 0 17 194 9000K 4K 9004K 3134 gnome-settings-daemon 1600000 51 2 1 25 1100 7648K 28K 7676K ? compiz For comparison, here's my other Ubuntu box, which also has compiz etc. enabled but with ATI RV370 (Radeon X300SE): top - 18:18:18 up 58 days, 4:27, 9 users, load average: 0.00, 0.00, 0.00 Tasks: 224 total, 1 running, 223 sleeping, 0 stopped, 0 zombie Cpu(s): 0.3%us, 0.3%sy, 0.0%ni, 98.8%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1024964k total, 987124k used, 37840k free, 247012k buffers Swap: 2048276k total, 94296k used, 1953980k free, 264744k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 24324 yang 20 0 61936 35m 6364 S 0 3.5 4:35.84 nxagent 1768 ntop 20 0 190m 32m 5388 S 1 3.2 283:36.15 ntop 1178 root 20 0 60588 29m 1788 S 0 3.0 5:48.89 console-kit-dae ... 1315 root 20 0 343m 4956 4020 S 0 0.5 3:43.87 Xorg Any ideas on how to get to the bottom of this? (i.e. not "Log out"/"Reboot") Thanks in advance.

    Read the article

< Previous Page | 477 478 479 480 481 482 483 484 485 486 487 488  | Next Page >