Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 482/788 | < Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >

  • Windows 7 x64 Hard Freezing (again)

    - by Lanissum
    Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

    Read the article

  • Toshiba Equium A110-252 laptop won't boot Windows.

    - by Drew Gibson
    I have a Toshiba Equium A110-252 laptop (XP Pro) which stopped booting a couple of weeks ago. The symptoms are that the laptop would display its DOS Toshiba splash screen, then the Windows (XP) boot screen would display, then a very brief blue screen flash, then back to the boot options screen (offering safe mode, safe mode with networking etc, last known good config, etc... none of these work). I assumed a duff HD, and swapped it for a new one and reinstalled from a TrueImage backup. This worked until I installed windows updates I think (the backup was a few months old), and now the PC is doing the same thing. I have installed a third, old HD (60GB) with Ubuntu 11.04 on it, and everything is fine. PC boots and runs Ubuntu beautifully. I need Windows running on it though ! Given these symptoms, could it a windows update issue ? Or might I have a hardware fault still ?

    Read the article

  • Reset All My Passwords

    - by E-rich
    I know there are some great apps out there for keeping track of passwords (see how-do-you-keep-track-of-all-your-passwords if you aren't familiar). I'm interested in additional features for managing my passwords, particularly to reset all my passwords. I can imagine that this feature would be pretty complicated to implement, considering: websites have different methods for resetting a password client applications most likely don't have a means to change a password except for through a graphical user interface (as opposed to providing a command line command) So, I'm curious if there is a solution out there and I just haven't found it. If not, perhaps I will have to start another side project.

    Read the article

  • Dhcp clients fail after successful import of server to new machine (win2k3)

    - by Tathagata
    I transfered the configs of a dhcp server from one server to another both running Windows Server 2003 R2 following http [://] support.microsoft.com/kb/325473. The new server has a statically configured ip(outside the scope) like the old one. Stopped the server on the old, and started up in the new server (authorized too) - but when I ipconfig /renew from a client its network interface fails with all 0.0.0.0 (or 169...*). I read somewhere I need to reconcile the scope to sync the new registry values ('ll try this tomorrow). What other troubleshooting steps can I take other than these (which didn't help)? Things work fine when the old server resurrects and the new one is taken down. The new server showed there was no requests for offer.

    Read the article

  • Need to transfer large video from Camera!-app to computer

    - by Henrik Söderlund
    I have a jailbroken iPhone 4S and am trying to transfer a 25minute long HD-video that I have recorded through SmugMug's Camera-Awesome (Camera!) app. Once recorded in the app, it stays within that app's interface until you choose to save it via the app onto the camera roll. When trying this option, the app just stalls, even when leaving it for an hour plus. I assume the video is too large to copy. I am trying the iExplorer app on my MacBookAir. I can find the Documents folder inside the Camera!-folder. But as soon as I access it to view the contents, it simply stalls the app completely. Probably after trying to read the enormous video. Is there a clever way to transfer this file onto the computer? I can use iFile on the iPhone to transfer through wifi, but I don't know the Camera! app's Documents folder location on the file system.

    Read the article

  • How to trigger a check for updates in Firefox programatically or from a command line?

    - by Triynko
    Is there a command line switch for firefox.exe or an "about:" URL that will either force an update check or at least display the Help/About dialog, which checks for updates and tells if you're running the latest version? One site claimed that the "about:" URL was the same as menu Help - About, but it's not. I built a program to automate the updating of various programs on my machine, and most programs have command line tools for checking for updates. Windows update has wuauclt.exe, Java has jucheck.exe. For some applications, I can even automate the interface, but it's difficult in Firefox, because the main window title is unpredictable (it depends on which web page is active), and all Firefox windows seem to use the exact same window class name.

    Read the article

  • Windows XP 32-bit + RocketRaid 622 + 4 x 3TB = not quite a RAID setup

    - by gmoney
    I'm looking to make a 6TB RAID 10 array from my new pile of drives under Windows XP 32-bit, however they are only for auxiliary storage. After adding all the drives to an array, and initializing them XP sees only a fraction of the storage, 2TB. I'm assuming this has to do with MBR vs GPT. Is making a series of 2TB volumes and then spanning my only solution? Most questions online have to do with booting from this setup, but I'm just using them as extra storage. Hardware: 4 x 3TB Hitachi Deskstars + RocketRaid 622 + Sans Digital TR8M TowerRAID. The array is connected via eSATA.

    Read the article

  • virsh console and tty size

    - by pehrs
    I have a virtualization server to which I connect over ssh. If I now change the size of the window it will automatically propagate to the server. It's most easily seen using stty -a, checking the columns and row values. I then use virsh console to connect to the serial interface on a KVM based virtual machine. When I now change the size of the window it does not propagate to the virtual server. This is most easily seen by checking stty -a, which is not updated on the virtual machine when I change window size. This means that line breaks does not work correctly in the terminal and any application that relies on window size for formatting (emacs, man, etc) gets messed up unless the window size on the client matches the default size on the server. A workaround is to manually set the window size to match the client window using stty, but I wonder if there is any way to get this information to propagate and set the window size in the virtual machine automatically.

    Read the article

  • Start Menu freezes when highlighting 'All Programs'

    - by gergesi
    Hey all, A friends machine is lagging for about 30 seconds when they highlight 'All Programs'. A gray box popus up where the program menu would be, but it doesnt populate for nearly 30 seconds. This seems to happen if he hasn't open the start menu for a bit.. but if he get's it working once, doing it immediatly afterwards will usually not have the same lag. Assuming computer hardware isn't an issue, any ideas what the problem may be? Sidenote: He mentioned making desktop shortcuts is taking long as well, does that give any clues?

    Read the article

  • Extend university wifi network [migrated]

    - by asfasdoiuh ouhouhouh
    i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want? Thank you all

    Read the article

  • Internet connection sharing windows server 2008 R2

    - by This is it
    I have one windows server 2008 r2, and that server has 4 network interfaces (3 private, 1 internet connection). I would like to share internet connection with other 3 networks. Windows server firewall should make logs of data that is transfered. It should not be possible to connect directly to private networks from internet. How could I do it? Edit: I tried with NAT in RRAS, but it doesn't work. Here is the configuration: Server: IP private:192.168.0.1 IP public: xx.xx.xx.xx client IP:192.168.0.2 Default gateway: 192.168.0.1 Public and private interface added in NAT section of RRAS.

    Read the article

  • Alternate Client for Cisco Unified Personal Communicator protocol

    - by Jason M
    At work we have an in-house chat system using CUPC. Does anyone else out there use this? There are a few things I do not like about this client: Where's the chat log? If I close the window, I have no way of getting my conversation back. Tabbed interface? That would be nice. I hate having multiple chat windows up, having to arrange them around my desktop as more people start talking to me. I don't like that I have to use this one-off application for particular this protocol when other chat clients will handle 99% of the other protocols I use. Tell me: Is the protocol an open standard for which other applications have support? (pidgin, adium, digsby, etc.) If not, can I overcome these issues from within CUPC? Perhaps there are newer versions of the client that overcome these issues.

    Read the article

  • RAID setup for maximizing data retention and read speed

    - by cat pants
    My goals are simple: maximize data retention safety, and maximize read speeds. My first instinct is to do a a three drive software RAID 1. I have only used fakeraid RAID 1 in the past and it was terrible (would have led to data loss actually if it weren't for backups) Would you say software raid 1 or a cheap actual hardware raid card? OS will be linux. Could I start with a two drive raid 1 and add a third drive on the fly? Can I hot swap? Can I pull one of the drives and throw it into a new machine and be able to read all the data? I do not want a situation where I have a raid card fail and have to try and find the same chipset in order to read my data (which i am assuming can happen) Please clarify any points on which it sounds like I have no idea what I am talking about, as I am admittedly inexperienced here. (My hardest lesson was fakeraid lol) Thanks!

    Read the article

  • How can I disable my laptop's built-in keyboard?

    - by sam
    I have a HP Compaq Presario C700 laptop with Windows 7 installed on it. My laptop's keyboard is not working properly; some keys never work and some keys will keep on pressing. I've formatted the OS but it didn't solve my problem. I bought an external USB keyboard and it works well. As some keys in the built-in keyboard activate themselves, I still couldn't work effectively. After searching Google I tried the following steps to disable the built-in keyboard: Disabled keyboard drivers: This didn't work because when the system reboots, the driver gets installed again automatically. Installed irrelevant driver for keyboard: This failed - I couldn't install the driver. After rebooting it installed the correct driver automatically. Can anyone help explain how I can temporarily uninstall my built-in keyboard? I don't want to remove it manually (removing the hardware cable).

    Read the article

  • Cisco 2900 series router - 3x 3g HWIC - Can you use the same subnet for each HWIC?

    - by Lance
    We host a site with a 2900 series router with 3x 3G-HWIC cards installed. It is hosted with telstra and plugs into our corporate WAN. The card authenticates against radius and advertises a route into the WAN for which subnet it routes for. We have always used the same advertised subnet on each. Telstra have advised us that this could be the cause of some drop out issues whereby some services will work for some people and not for others and are saying effectively that their system will only use one of these at a time even though we can see the interface is online and assigned a WAN IP address. Has anyone out there configured a multi HWIC setup before and if so are they using different subnets for each or the same?

    Read the article

  • Different versions of 2.5" drives? Unscreawing Intel 320 for slimmer drive to fit newer thinkpads?

    - by hhh
    My x60s laptops come with about 1-2mm heigher 2.5" HDD than newer x220 models. This is totally stupid when one would like to reuse the old drive in the newer laptops. I bought newer 2.5" 320 Intel SSDs and they seem to have such 1-2mm gap to unscrew but I am unsure whether it is meant for opening. Could someone instruct what to do here? Look the manufacturer has started changing the old good 2.5" drives into slightly different versions, now it means slow compability issues to fix or totally new 2.5" drives. Ideas how to proceed? Unscrewing newer 320 drives or are some other versions of 2.5" drives meant for x220? Does there exist some sort of racks to get drives working between different comps? Perhaps booting from laplink is currently the easiest solution to get things working when changing harddrives between comps? Perhaps related http://www.zdnet.com/blog/hardware/seagate-announced-super-slim-25in-momentus-thin-hard-drive/6439

    Read the article

  • Iozone: sensible settings for a server with lots of RAM

    - by Frank Brenner
    I have just acquired a server with: 2x quadcore Xeons 48G ECC RAM 5x 160GB SSDs on an LSI 9260-8i Before deploying the target platform, I'd like to collect as much benchmark data as possible, testing I/O with hardware RAID in various configurations, ZFS zRAID, as well as I/O performance on vSphere and with KVM virtualization. In order to see real disk I/O performance without cache effects, I tried running Iozone with a maximum file of more than twice the physical RAM as recommended in the documentation, so: iozone -a -g100G However, as one might expect, this takes far too long to be practicable. (I stopped the run after seven hours..) I'd like to reduce the range of record and file sizes to values that might reflect realistic performance for an application server, hopefully getting the run times to under an hour or so. Any ideas? Thanks.

    Read the article

  • One way sync with either Dropbox or Google drive on linux and windows

    - by sup
    I could not google this one. I would like to use Dropbox or Google drive only as backup, so I would like to ensure I only upload to those services and never download (unless done manually via the web interface). There would be several of us uploading stuff to one account, so we would need to ensure we don't accidentaly delete something on another guy's machine by doing some changes on our local machine. Is there a simple way to do this automatically - i.e. by running a daemon that will upload eveyuthing in a given folder but never download anything? I am on linux, so that complicates things a bit, but I am also interested in windows solutions.

    Read the article

  • WAN and LAN setup for IPv6

    - by neu242
    We just got a IPv6 /48 range (a gateway and an IP address) for our company, but I'm unsure about how to set it up. We use FreeBSD 8.4 (pfSense 2.1) as a router/firewall. Currently we have IPv4 setup with a WAN towards the internet, and a NAT-ed LAN behind it for office PCs. We want to keep the LAN network for security, and we want IPv6 addresses from the /48 for all office PCs (without NAT). The WAN is configured with the IPv6 gateway 1111:2222:3333::1/48 and interface address 1111:2222:3333::2/48. But when it's configured this way, I guess it's impossible to fit the LAN on a /64 within the /48? I believe I should configure the WAN subnet on 1111:2222:3333:1::/64 and the LAN on a subnet like 1111:2222:3333:2::/64. Is this something I can configure myself, or do I have to ask the ISP to configure that routing for me?

    Read the article

  • What is the fastest RAID in practise?

    - by Luke
    I'm going to be rebuilding my server, and I want much faster access to my data. I've used RAID 1 and 0 in the past, and decided upon RAID 10 (dedicated RAID card). Then someone told me to use RAID 5+0, then someone else told me to use RAID 6+0. Assuming the Hardware RAID Card supports each level, what is currently the FASTEST RAID available, given x number of hard drives? Reliability is now another factor, and I am willing to spend money on new drives if a drive (or multiple) fail. I simply want to know what the fastest RAID level is, along with some reliability for recovering from a failure

    Read the article

  • Windows Server R2 Task Scheduler - Open Programs On Startup

    - by Markive
    I want Fiddler and some other programs to run on startup, so it's there and running every time I bring up an instance of my test server on EC2. There's a few questions about running scripts on Startup with Task Scheduler, but this needs to work slightly differently. I have set this up to run on startup but when I RDP into the server I can see Fiddler is running in Task Manager (so I can't manually run a second instance of the program), but it's not viewable on the task bar? So I can't actually see the interface? Here's my setup: General Tab Running with highest privileges Run whether user is logged on or not Configure for Windows 2008 server R2 Triggers Tab At startup Others are obvious and defaults.. What am I doing wrong?

    Read the article

  • My Network adapter "D-Link DWA-547" is causing windows 7 to freeze up.

    - by Anders
    Any audio playing, and sometimes the program i am using is constantly stuttering and freezing up. I have narrowed the offending hardware down to my: D-Link DWA-547 RangeBooster N650 Desktop Adapter If i disable it in the device manager everything runs fine and smooth. The card works, and gives me super fast internet. But the rest of the system hangs. I have tried installing the card with the drivers from the cd that came with it, i also tried the lates beta drivers from the d-link webpage, but the problem persists. What do i do? I am running windows 7 x64 on a asus p5b motherboard with 2 intel processors.

    Read the article

  • Installing raid controller forces reinstall of Windows Server 2008

    - by Tyler
    So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

    Read the article

  • How to clean this Dell Precision M6400

    - by Daniel Pratt
    I have (well, ok, my employer has and I use) a Dell Precision M6400 notebook. It's a decent piece of hardware, but I have at least one major gripe: It's a dust and...uh...crumb (I repent! I repent!) magnet! And I cannot seem to exorcise the dust/crumbs from it! There is a strip of metal above the keyboard that is punched full of tiny holes. Well, maybe it's better to describe them as 'pits'. If a sufficiently small particle finds its way into one of those pits, there is only about a 50% that I will manage to get it out. Consequently, there is now a chorus of tiny little particles silently chiding me about eating cookies a cracker whilst I browse the intarwebs. Does anyone have any suggestions about how I could remove these particles from this machine...while still preserving the function of the machine?

    Read the article

  • Windows Network copy and access denied randomly

    - by The King
    I have a windows 2008 R2 server and I now installed a new bigger HDD into it. I wanted to copy big AVI files to the new server hdd what is shared on the local network. I have write access to the servers hdd and I can successfully copy smaller files to it. But when I copy bigger files more than 500MB randomly on the copy I get Access Deny message. If I use RDP I can copy files through RDP client. I checked error messages at the server but I didn't found any error about this access deny. Because of RDP copy works I don't think that this could be hardware error. I think this is some kind of software setting error. Someone has faced this kind of error? Or somebody has idea what could cause or how to find the root of the problem?

    Read the article

< Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >