Search Results

Search found 22903 results on 917 pages for 'network namespace'.

Page 482/917 | < Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >

• What is error 324? Is it related to Google Chrome? Or Verizon Webmail?

  - by Jason Rhodes

  My in-laws are having trouble with signing into their Verizon Webmail account at webmail.verizon.net, only when they are on their wireless network. When they try to log in from wireless they get "Error 324" in the browser, in both Google Chrome and Internet Explorer 8. But they can access any other site, and they can get on their Verizon email when they plug in directly to the browser. Why is this?

  Read the article

• Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

  - by user46055

  Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

  Read the article

• Differences between how OS X Snow Leopard and Lion interface with a proxy?

  - by Antoni

  We have a proxy at school, which requires a login/password, and blocks a certain number of sites that aren't "school related" (facebook, youtube, etc.) While I'm able to get through to most things, people who've upgraded to Lion can't get through to anything, even though I've replicated my proxy/network settings on their machines. Is it possible that the difference in OS versions is causing this? I have Snow Leopard, they have Lion.

  Read the article

• MBPro, mid 2010 can't see Dlink DIR655 signal after sleep etc

  - by user88114

  This is my son's MBP 7,1 running Snow Leopard 10.6.7. Router signal is fine since iPad, Wintel on same table 20 feet from router are fine. the MBP however frequently wakes and fails to find the internet. iStumbler can see 1 neighbours hub and my garden hub are there but can't get to the normal DIR655 wifi... no ping no en0 or en1 device seems to exist. Airport off and on does not help. He just resets router and it all works but this does not please me! I must admit the winter sometimes seems to loose connect too, but less so. The DIR655 (hardware rev A3) is on the original EU firmware 1.10, I'm cautious about jumping to latest 1.31EU since no downgrade seems to be possible and that feels a bit risky as so much is set up and working fine. If I use the DIR655 admin web and release the lease the MBP has then wake it all worked OK. So I suspect lease timing/locking issue but unsure how to check up, plus why iStumbler seems to say the network is not visible at all when I sit on the iPad right next to it just fine.. I do not think there are any channel overlaps and we also have RFquiet DECT phones (Orchid) that are silent until lifted or called. Anyway signals all show low interference and high throughput except for this failure to connect. Just walked the MBP to the garden office and iStumbler now sees the more distant DIR655 signal although it will not connect to it (does not show under Sys Prefs NetNetwork names) even after airport off & on... It also refuses to connect to my garden network (an old Belkin acting as AP wired to DIR655), the signal it can see and even net name in Sys Prefs NetNetwork names (2 mins later):NOW both names ARE visible, but both fail to accept the correct WPA2 password and keep asking again after failing to connect. IT ALL MAKES NO SENSE TO ME. Just revoked the lease for the MBP on DIR655 and no changes although this seemed to help MBP wake into connection 1 hour ago. OK a bit of walking about to report. Carried MBP across garden towards DIR655, a few other wifis show up on iStumbler, low signals all channel 1. Right next to DIR655 but iStumbler not showing it, although most other wifi's have gone. I'd say iStubler is suffering timeouts&hangs but hard to be sure. Lots of attempts to Airport on/off, join other etc and suddenly I get to connect, get given new IP (I revoked), can browse. Walk away, connection drops quite soon at 30 feet then reconnected briefly then died again. MUST ATTEND ELSEWHERE FOR A BIT...

  Read the article

• How to connect to a remote desktop using Tight VNC server.

  - by Ravi shankar

  Can some one suggest me the best network application debugging tools. As I am trying to connect to remote VNC server uisng windows 7. I have diabled windows firewall and antivirus but sitll not able to connect to the remote server. I have also tried Putty to connect to the remote pc but was not successfull. But when I try to access the PC using windows I can access the shared documents.

  Read the article

• Small business: what should I know about computer security?

  - by geschema

  I run a small (1 man) consulting company in the field of embedded systems, working from home using a standard DSL internet access. My main development machine is a Windows XP PC, which is connected to the router with an ethernet cable. I also have a MacBook Pro laptop, which is connects to the network via WLAN (WPA-PSK). Besides enabling the Windows firewall, not using IE, having an up-to-date antivirus program and strong passwords, what do I need to know to keep my customers' data safe on these computers?

  Read the article

• Enabling RSA Toolbar in IE8

  - by braincells2pixels

  OS - Win7 Utlimate 64 bit I have installed the RSA security toolbar used to VPN into my corporate network. I can see that RSA Toolbar is enabled in the Manage Add-Ons window. However I do not see the toolbar when I right-click in the toolbar section in IE. The add-on manger says that the toolbar is loaded but I cant get it to show in the toolbars section Any ideas? TIA

  Read the article

• What is SIP trunking?

  - by hypnocode

  Can someone explain to me in plain English what SIP trunking is, please? I've read about it on Google, but I don't really grasp it yet. Does it allow a VoIP call to be placed outside of the LAN? So if you had Asterisk setup as the PBX, then IP calls could be made outside of the network? Am I close or am I just saying stupid words?

  Read the article

• Can I build a VPN on top of Tor?

  - by Thilo

  If I understand correctly, the Tor client works as a combination of a proxy server and application plugins (such as the Firefox Torbutton) that enable use of the proxy and contain additional application-specific privacy features (such as suppressing cookies, sandboxing JavaScript, turning off Flash). That works very well with applications that support it (such as Firefox). But is there a way to establish a VPN over Tor, so that my whole Wifi network can be protected, including applications that do not support proxy configuration and devices like iPod touches?

  Read the article

• Unable to connect to VPN because ther are no TAP-Win32 adapters

  - by pingu

  I am trying to connect to a Barracuda VPN with a windows 7 machine. I am gettng this message before it fails: There are no TAP-Win32 adapters on this system. You should be able to create a TAP-Win32 adapter by going to Start - All Programs - Network Connector - Add a new TAP-Win32 virtual ethernet adapter. I am unable to follow these instructions on Windows 7, any ideas on how to create this adapter?

  Read the article

• WordPress 3.5 Multisite and nginx siteurl issues

  - by Florin Gogianu

  I'm setting up multisite on localhost in subdirectories. The problem is that when I'm trying to access the dashboard of a site I just created ( localhost/wptest/site/wp-admin ) I get "This webpage has a redirect loop" and when I try to access the actual website ( localhost/wptest/site ) the page loads but without assets, such as css. When I access the network dashboard, or the primary site dashboard on localhost/wptest everything is just fine. Also when I edit the permalink of the second site in the network dashboard, to be like this: localhost/site it also runs fine. How to make it work with the default permalink structure localhost/wptest/site? The wordpress files are in /usr/share/html/wptest The wp-config.php is as follows: define('WP_ALLOW_MULTISITE', true); define('MULTISITE', true); define('SUBDOMAIN_INSTALL', false); define('DOMAIN_CURRENT_SITE', 'localhost'); define('PATH_CURRENT_SITE', '/wptest/'); define('SITE_ID_CURRENT_SITE', 1); define('BLOG_ID_CURRENT_SITE', 1); And the server block / virtual host is like this: server { ##DM - uncomment following line for domain mapping listen 80 default_server; #server_name example.com *.example.com ; ##DM - uncomment following line for domain mapping #server_name_in_redirect off; access_log /var/log/nginx/example.com.access.log; error_log /var/log/nginx/example.com.error.log; root /usr/share/nginx/html/wptest; index index.html index.htm index.php; if (!-e $request_filename) { rewrite /wp-admin$ $scheme://$host$uri/ permanent; rewrite ^(/[^/]+)?(/wp-.*) $2 last; rewrite ^(/[^/]+)?(/.*\.php) $2 last; } location / { try_files $uri $uri/ /index.php?$args ; } location ~ \.php$ { try_files $uri /index.php; include fastcgi_params; fastcgi_pass unix:/var/run/php5-fpm.sock; } location ~* ^.+\.(ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|rss|atom|jpg|jpeg|gif|png|ico|zip|tgz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|bmp|rtf)$ { access_log off; log_not_found off; expires max; } location = /robots.txt { access_log off; log_not_found off; } location ~ /\. { deny all; access_log off; log_not_found off; } } And finally here's an error log: 2013/06/29 08:05:37 [error] 4056#0: *52 rewrite or internal redirection cycle while internally redirecting to "/index.php", client: 127.0.0.1, server: example.com, request: "GET /nginx HTTP/1.1", host: "localhost"

  Read the article

• Workgroup/Domain for a DLP software

  - by Rohit

  A client has inquired me for a DLP software to lock USB and CD Drives. I contacted few companies and the DLP tool needs a Domain from where the software can control the nodes. The client says that they have 55 machines in a WorkGroup and also has 1 server. I am not following what exactly is a WorkGroup and a Domain. The DLP tool specifications say that the network must have a Domain and Active Directory Services.

  Read the article

• Server 2012 intermittently fails to respond to pings from single host, even with firewall disabled, but responds to non-ICMP requests fine

  - by James Westbury

  This one is kind of weird. I've got the following machines involved: DC01 - 10.1.2.42, Server 2012, domain controller & DNS server, physical machine nagiosv - 10.1.2.35, CentOS 6.4, Nagios, virtual machine CB01 - 10.1.3.81, Ubuntu 12.04 LTS, couchbase server, virtual machine So, I noticed something was wrong while configuring this new Nagios VM. I started seeing DC01's state flapping. I logged into nagiosv when I saw this happening, and attempted to ping DC01, both by FQDN and its IP address. Neither worked. I tried pinging the machine from CB01, which is another VM on the same virtual switch/physical NIC as nagiosv, and that worked fine. Pings still failing from nagiosv at this time. DC01 is also an internal DNS server, so I ran dig google.com from nagiosv, and was able to run a query against DC01 just fine: ;; Query time: 1 msec ;; SERVER: 10.1.2.42#53(10.1.2.42) ;; WHEN: Fri Nov 1 07:53:51 2013 ;; MSG SIZE rcvd: 204 Pings still failing from nagiosv, though. I can ping from DC01 to nagiosv, and that works, and I can still ping from other VMs on the same physical NIC into DC01, and that works. I should mention at this point that I've disabled the firewall on DC01 for testing purposes, and it doesn't make a damned bit of difference. (Even with the firewall enabled, I have a blanket exception for ICMP from the local subnet, so it shouldn't make a difference, but I figured I should test it anyway.) I loaded up Wireshark on DC01 and pinged it from nagiosv again. What I see is a bunch of echo requests coming in and not a single reply going back out. Filtered results here, showing all ICMP traffic during a 15-second period. A few more bits of info: There are no IP conflicts on the network. MAC addresses on the incoming pings match the MAC on the VM. There are no duplicate MACs on the network, as far as I can see. I have absolutely no idea why DC01 is failing to respond, here. Any ideas?

  Read the article

• Google Chrome issues

  - by Ben Hooper

  I'm an avid user of Chrome and would defend it to the death but there is no denying that it has issues, and I've been experiencing a lot of them recently. Issues Stuck tabs Issue: Around 60% of the time (higher when the system has just started), when Chrome is launched, some or all of the pinned tabs and startup pages will get stuck in the counter-clockwise-rotating "contacting server" mode and never snap out of it. Fix: Quit and launch Chrome until they load properly (this really isn't good, as quitting and launching Chrome can and has cleared all pinned tabs). Extra Information: If you stop the loading and re-enter the URL then the page will load perfectly. The amount of pinned tabs or startup pages seems to be irrelevant, but I could be wrong.   "Downloaded/out of" Issue: Each item in the download bar has a downloaded status section, formatted as "downloaded/out of". Sometimes Chrome doesn't display the "out of" part.   Collapsed settings windows Issue: In Chrome version 19(ish)+, settings are configured via overlayed / popup windows. Sometimes, the window will open fully collapsed. Fix: Resize Chrome's window or open the developer tools. "Network Error" with large downloads Issue: Sometimes, when downloading large files (500MB+) Chrome will download the entire file, the download status will freeze (for example, "1 GB/1 GB") for a few minutes, report "Network error", and delete the .crdownload file. Extra Information: The same file from the same website on the same computer downloads perfectly in other browsers. The website and file type seem to be irrelevant.   Information: I've experienced some of these issues on my home PC and some on my work PC, both of which are Windows 7 Ultimate x64. The only things that link them are my Google account (all settings are synced). Updating Chrome hasn't worked. Most of these issues presented themselves around about version 17 and have continued right through to 21 (current). Uninstalling Chrome, deleting all data in %programFiles(x86)%\Google and %localAppData%\Google, and reinstalling hasn't worked. I have yet to see whether disabling all extensions would make a difference, but it's hard to diagnose as these issues don't occur 100% of the time.   In my case, I don't know if there's an actual solution. I'm just curious as to whether anyone else is having similar issues to those that I'm experiencing. At least then I'll know it's an issue with Chrome itself.

  Read the article

• Assign fixed IP address via DHCP by DNS lookup

  - by Janoszen

  Preface I'm building a virtualization environment with Ubuntu 14.04 and LXC. I don't want to write my own template since the upgrade from 12.04 to 14.04 has shown that backwards compatibility is not guaranteed. Therefore I'm deploying my virtual machines via lxc-create, using the default Ubuntu template. The DNS for the servers is provided by Amazon Route 53, so no local DNS server is needed. I also use Puppet to configure my servers, so I want to keep the manual effort on the deployment minimal. Now, the default Ubuntu template assigns IP addresses via DHCP. Therefore, I need a local DHCP server to assign IP addresses to the nodes, so I can SSH into them and get Puppet running. Since Puppet requires a proper DNS setup, assigning temporary IP addresses is not an option, the client needs to get the right hostname and IP address from the start. Question What DHCP server do I use and how do I get it to assign the IP address based only on the host-name DHCP option by performing a DNS lookup on that very host name? What I've tried I tried to make it work using the ISC DHCP server, however, the manual clearly states: Please be aware that only the dhcp-client-identifier option and the hardware address can be used to match a host declaration, or the host-identifier option parameter for DHCPv6 servers. For example, it is not possible to match a host declaration to a host-name option. This is because the host-name option cannot be guaranteed to be unique for any given client, whereas both the hardware address and dhcp-client-identifier option are at least theoretically guaranteed to be unique to a given client. I also tried to create a class that matches the hostname like this: class "my-client-name" { match if option host-name = "my-client-name"; fixed-address my-client-name.my-domain.com; } Unfortunately the fixed-address option is not allowed in class statements. I can replace it with a 1-size pool, which works as expected: subnet 10.103.0.0 netmask 255.255.0.0 { option routers 10.103.1.1; class "my-client-name" { match if option host-name = "my-client-name"; } pool { allow members of "my-client-name"; range 10.103.1.2 10.103.1.2; } } However, this would require me to administer the IP addresses in two places (Amazon Route53 and the DHCP server), which I would prefer not to do. About security Since this is only used in the bootstrapping phase on an internal network and is then replaced by a static network configuration by Puppet, this shouldn't be an issue from a security standpoint. I am, however, aware that the virtual machine bootstraps with "ubuntu:ubuntu" credentials, which I intend to fix once this is running.

  Read the article

• problem with ubuntu gnome environment

  - by Kukmedis

  Hello, after removing gnome-panel gnome doesn't start at all. I get black screen and terminal upon turning PC on. It would seem no problem but wireless network doesn't start too, so i have no internet connection to "apt-get install--reinstall". Any suggestions? Thank you

  Read the article

• Home computer as ssh bridge

  - by pistacchio

  Hi at work, due to our network configuration, i cannot ssh external servers. We are on a Windows environment. I need to ssh a server of mine, but i can only exit from our LAN via port 88. How could I use my home MacOs box to accept an http connection from my home computer and route it via ssh to the server i need to' connect to? Thanks.

  Read the article

• HVM virtualization with PV drivers on XenServer

  - by Nathan

  Is it possible to create an HVM guest in XenServer 5.5 that uses PV drivers for disk and network without being fully paravirutalized? This should give me decent performance from the VM without having to jump through hoops to create a PV guest when a pre-built template doesn't exist. Since PV drivers exist for Windows, and XenServer provides templates for windows that use HVM virtualization this must be possible, I just don't see how to configure this myself.

  Read the article

• Blade Enclosure, Multiple Blade Servers, Whats the closest approximation to a DMZ?

  - by codeulike

  I appreciate that to get a proper DMZ, one should have a physical separation between the DMZ servers and the LAN servers, with a firewall server in between. But, in a network consisting of a single Blade Enclosure containing two or more Blade servers, whats the closest approximation to a DMZ that could be designed? More details: Virtual servers, mostly Windows, running in a VMWare environment on the Blade servers, and physical firewall box between the Blade enclosure and the internet.

  Read the article

• Overnight SQL Server Full Backup taking 4x longer, everything else slower, RAID problem?

  - by Tom

  Sql Server on Windows Server 2008: Overnight, fullbackups taking 7-10 hours instead of 1-3 transaction logs taking 4-5 minutes instead of 1 minute Query optimization taking 3x longer I'm feeling like a disk in my Raid Array (raid5) is faulty or the raid controller or network card, Rackspace is telling me everything is fine. Any ideas on what/how I need to check?

  Read the article

• How do I find a file that begins with a phrase in Windows Search?

  - by plasmuska

  Hi Guys, What is the syntax for searching a file with file name that STARTS with a certain phrase? Example: I have two files: 60933 blahblah.xls PZ 60933 blahblah.xls I would like to search only for the first one but Windows Search always returns two results. I have tried these but none of them seem to work: filename:60933 filename:^60933* filename:60933..xls My setup: Windows XP Pro CZ, Windows Search 4, files are located on indexed network share.

  Read the article

• How do I get the IP address of a switch.

  - by Atilla Filiz

  I have a wireless AP+switch which I configured years ago, before moving, and haven't used for a while. Now I want to reconfigure it for my new network, but have no idea what I set as its IP address(It was probably something 192.168.xx.yy). What is the best way for discovering its IP? A script to spam the whole address space?

  Read the article

• Running Chromium Flow on a USB disk to boot on school computers?

  - by user38008

  So I gonna make a USB bootable drive of Hexxeh's ChromiumOS Flow. I want this to be able to boot into it on my school computer. The computers use Novel network and each student gets their own login. Can I use my USB drive to boot into ChromiumOS from the schools computer? I dont need to access the files on my Novel Login. So can I even do this? Thanks.

  Read the article

• Simple EXPECT script to execute remote command and displat output

  - by s.mihai

  I am trying to connect to a network router and execute show status on it. Currently i am using: spawn ssh -o StrictHostKeyChecking=no [email protected] expect " * ? password:*\r" send -- "secretPassword\r" sleep 5 send -- "show status\r" sleep 10 send -- "exit\r" It dosen't work, i get stuck at [email protected]'s password:i've tried entering the password but it does not work, i get: server1:~# secretPassword -bash: server1: command not found server1:~#What am i doing so wrong here ... ?

  Read the article

• isa 2004 - banned site rule cause slow internet

  - by Holian

  Hi Gods, We have windows server 2003 with isa 2004. Our clients uses internet with proxy. We have two isa rule: order name action protocolls from/listener to condition 1. trafic ALLOW all outbound all networks all networks all users 2. FTP ALLOW FTP Server EXTERNAL/INTERNAL/Local host 10.1.1.1 So we have to "bann" a few webpage (like facebook, youtube...etc...), so we make a new rule 0. banned DENY HTTP internal denied pages all users In the denied pages we have the *.facebook.com domain set. After we enable this rule, the entire internet slows down. The banning rule works well, redirect to an internal site, but the other sites.... If i open a page..it normally takes 3-10 sec to load, but after this rule this time is: 2-4 minutes. In the monitor / logging menu we got a few FAILED CONNECTION ATTEMPT like: Log type: Web Proxy (Forward) Status: 304 Not Modified Rule: All local traffic Source: Internal ( 10.1.1.1:0 ) Destination: External ( 172.24.28.22:3128 ) Request: GET http://www.konyvelozona.hu/wp-content/uploads/nyugdijas-holgy-2.jpg Filter information: Req ID: 17270b72 Protocol: http User: anonymous Additional information Client agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.3072... Object source: Verified Cache Processing time: 9047 Cache info: 0x18801002 MIME type: - In the event log we got a few log: Description: The Web Proxy filter failed to bind its socket to 10.1.1.1 port 80. This may have been caused by another service that is already using the same port or by a network adapter that is not functional. To resolve this issue, restart the Microsoft Firewall service. The error code specified in the data area of the event properties indicates the cause of the failure. The failure is due to error: 0x8007271d The Web Proxy filter failed to bind its socket to 127.0.0.1 port 80. This may have been caused by another service that is already using the same port or by a network adapter that is not functional. To resolve this issue, restart the Microsoft Firewall service. The error code specified in the data area of the event properties indicates the cause of the failure. The failure is due to error: 0x8007271d If i tpye: netstat -o -n -a | findstr 0.0:80 then i got, tcp 0.0.0.0:80 0.0.0.0:0 LISTEN 4 udp 0.0.0.0:8031 *.* 2780 udp 0.0.0.0:8082 *.* 2780 Some month ago we installed XMAP, but now we only use mysql. Apache service stopped. In the Xamp port check menu i see: Service POrt Status Apache (http) 80 Process: System Maybee this is the problem? I dont know what should i do now... Thank you folks.

  Read the article

< Previous Page | 478 479 480 481 482 483 484 485 486 487 488 489  | Next Page >