Search Results

Search found 89712 results on 3589 pages for 'ubuntu file osb'.

Page 485/3589 | < Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >

  • Logging communication between two VMs

    - by sYnfo
    Hi, I'm trying to set up "malware lab" described in this paper. So far, I've set up Windows guest system, adding one Host-only Network adapter, and setting this (sorry if the names aren't exactely correct, I don't have an english language version): - IP Address - 10.0.0.3 - Subnet mask - 255.255.255.0 - Default gateway - not set - Preferred DNS - 10.0.0.4 - Alternate DNS - not set And a Linux guest system - Ubuntu 9.04 - with two Network adapters - Bridged (eth0) and Host-only (eth1), and setting eth1 IP Address to 10.0.0.4, leaving the eth0 to be set by DHCP. Then, I have configured iptables as described in the paper, ie.: iptables -F -t nat iptables -F -t mangle iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -A PREROUTING -i eth0 -j ACCEPT iptables -t mangle -A PREROUTING -p udp -i eth1 -d 10.0.0.3 --dport 53 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 --dport 80 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 -d 10.0.0.3 --dport 6000:7000 -j ACCEPT iptables -t mangle -A PREROUTING -i eth1 -j ULOG iptables -t mangle -A PREROUTING -i eth1 -j DROP Now, when I try to ping the windows system from within the Linux system, it does not reply, I guess thats perfectly normal, because iptables is blocking ping responce. Same when I try to ping the Linux system from within the Windows. But when I try to access any web page from within the Windows system, I would expect that this action should get logged by iptables. But thing is, I don't see any of that kind of lines in log file (If I am looking in the right place, that is. :) It is at /var/log/messages, isn't it?). So, what do you think might be the problem here? I should note, that this is the first time I'm using linux, so don't expect ANY working knowledge of Linux at all... :) Also, since english is not my mother tongue, feel free to point out any gramatical mistakes... :) Thanks for any advice.

    Read the article

  • Mixing both local and nonlocal addresses on three switches

    - by klew
    I have four computers that have nonlocal addresses like 150.X.X.X. Now I also get another few computers that should be only accessible through a gateway (it will be computing cluster) and they addresses are 10.0.0.X. I also wanted to include those four older computers to this new cluster, but I want them to be accessible from internet on nonlocal addresses (so I would like to set up them on both 150.X.X.X and 10.0.0.X addresses - I've set up it as interface eth0:0 since I have only one NIC). Those new computers have their switch and old computers also have their own switch. Both of them are connected to another (third) switch. The problem is that those old computers see each other (I can ping them), and also new computers see each other, but I can't ping old computer from new computer and vice versa. However pinging on nonlocal adresses works as expected. I looked into switch configuration and didn't find anything useful. I have no idea what I missed here. Can somebody help? All computers have Ubuntu Server 10.04

    Read the article

  • Virtual Server HDD shrinks without apparent reason

    - by Christian
    We have a virtual hosted Linux server, and in the last few months every now and then the HDD shrinks from 400GB down to the exact byte count that is in use. All existing data can be downloaded and displayed without a problem, but we can't upload or edit any files because of the "full" hard drive. Here is a screenshot, where "size" should be 400GB: This has happened twice before, and again today. The last times, when I reported the issue to the host, they said "that isn't possible, you must be doing it wrong", but soon after the call, the problem vanished without us doing anything, so I suppose that they have some kind of problem they're not willing to admit. Even after the fact, they acted like nothing was wrong and wrote me a mail in which they explained that I can use "df -h" to view available disk space (well duh, how do you think I noticed this particular issue?). Questions about if and what they had done were ignored. It has happened around the 25th to 28th of the month, so I suspect that they might have a cronjob running every 30 days or so which wreaks havoc with some VM configs. I just want to understand the problem, but the host support hasn't been very helpful in that regard. I have tried Googling the issue, but any combination of search terms I can come up with just gives me tutorials on how to change HDD size in a virtual machine. a) What could be the cause of shrinking HDD size in a Ubuntu 12.04.3 LTS server? Could there be anything in our virtual machine or is it more likely to be an issue with the vm host? b) Can I do anything about it without needing to contact the host's support? c) Is there anyway I can prevent this from happening at all?

    Read the article

  • 3 Monitor PCI-e Graphics card (without tremendous pain)?

    - by N Rahl
    As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

    Read the article

  • Any tool available to make renaming in Windows XP more like Mac OS X?

    - by alex
    I've noticed 1 cool thing and OS X. When you rename a file, it automatically selects everything up until the extension. For example, attempting to rename this.is.a.file.png would preselect this.is.a.file allowing you to quickly rename it whilst preserving the extension. I know I could turn off 'show extensions for known file types', but I like to have them visible. Is there any software that can do this? Thanks

    Read the article

  • package manager cannot create users? installation script fails?

    - by RapidWebs
    It seems that when trying to install any package which requires the creation of a system User and Group, the installer fails with the error: install: invalid user 'username' When it happened the first time, I assumed it was related to the package, or it's installation script. But now I am attempting a different package, and alas, the same issue arises! note: /etc/passwd and /etc/group is not chattr -i Here is the example output from an attempted installation (of varnish): Selecting previously unselected package varnish. Unpacking varnish (from .../varnish_3.0.2-1ubuntu0.1_amd64.deb) ... Processing triggers for man-db ... Setting up libvarnishapi1 (3.0.2-1ubuntu0.1) ... Setting up varnish (3.0.2-1ubuntu0.1) ... install: invalid user `varnish' dpkg: error processing varnish (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: varnish note: running ubuntu 12.04 For now, I have resolved the issue by manually creating the users, and running apt-get install -f, but this does not resolve the actual issue. Any ideas?

    Read the article

  • How to wipe free disk space in Linux?

    - by Alex B
    When a file is deleted, its contents may still be left in the filesystem, unless explicitly overwritten with something else. "wipe" can securely erase files, but does not seem to allow erasing free disk space not used by any files. What should I use to achieve this?

    Read the article

  • Grub Installation Failed: Fatal Error ... now what I do?

    - by eklavya
    I know there are some threads that touch this but I feel I have done something uniquely stupid. hence the post and plea for help. I am a beginner @ Linux. So I have a PC with a HDD (hard disk drive) and SSD (solid state drive) It was running Linux Mint /dev/sda1 - HDD Partition 1 - 2 TB (mounted this is /home /dev/sda2 - HDD Partition 2 - 1 TB (separate back up drive, i was backing up files to this) /dev/sdb1 - SSD Partition 1 - 100 GB (OS) /dev/sdb2 - SSD Partition 2 - 20 GB (Swap) The operating system was Linux Mint and was installed on the /dev/sdb1 i.e the solid state drive. I had partitioned off the sda into 2 TB and 1TB and presented the 2 TB as the /home to the OS. Anyway last night I decided to make a return to Ubuntu via the path of Elementary OS. Everything went fine with the install until it stated that GRUB installed failed and this was a Fatal error (no kidding I said). No I am stuck. I have definitely done something wrong and don't know what it is... My biggest pain is the files on the /dev/sda2. I want to save these before I try something drastic like wiping off the /dev/sda completely. So I have the following questions... Can I use a liveCD USB to save these files ? I can see the /dev/sda2 but was unable to access the files in the liveCD last not least ... how do I fix the main issue here. Why could the OS not install GRUB 2b... why is my SSD the /dev/sdb ... and not /dev/sda. Does that have something to do with it that my master boot record sits on the HDD /dev/sda and not /dev/sdb

    Read the article

  • "pdf_open: Not a PDF 1.[1-5] file." when typesetting TeX file in TextMate

    - by Manti
    I have a TeX file, which is typeset by XeLaTeX. The file has \includegraphics{coverimage.eps} on the first page, and coverimage.eps is located in the same directory as the TeX file. OS: MacOS 10.6.5, TextMate 1.5.10, xelatex 3.1415926-2.2-0.9997.4 (TeX Live 2010) If I run xelatex doc.tex in console, file compiles without errors, and eps file is included. If I typeset it in TextMate (xelatex engine is selected in preferences), I get the following error: ** WARNING ** pdf_open: Not a PDF 1.[1-5] file. ** WARNING ** Failed to include image file "./coverimage.eps" ** WARNING ** >> Please check if ** WARNING ** >> rungs -q -dNOPAUSE -dBATCH -sPAPERSIZE=a0 -sDEVICE=pdfwrite -dCompatibilityLevel=%v -dAutoFilterGrayImages=false -dGrayImageFilter=/FlateEncode -dAutoFilterColorImages=false -dColorImageFilter=/FlateEncode -sOutputFile=%o %i -c quit ** WARNING ** >> %o = output filename, %i = input filename, %b = input filename without suffix ** WARNING ** >> can really convert "./coverimage.eps" to PDF format image. ** WARNING ** pdf: image inclusion failed for "coverimage.eps". ** WARNING ** Failed to read image file: coverimage.eps ** WARNING ** Interpreting special command PSfile (ps:) failed. ** WARNING ** >> at page="1" position="(107.149, 124.566)" (in PDF) ** WARNING ** >> xxx "PSfile="coverimage.eps" llx=0 lly=0 urx=408 ury=526 rwi=3809 and there is no image included in the resulting file (but text looks ok). I am not sure whether it is the error of xelatex or TextMate LaTeX bundle. What I tried to do: As I said, xelatex doc.tex from console works. The exact command line that TextMate uses is: xelatex -interaction=nonstopmode -file-line-error-style -synctex=1 But it works from console too. If I convert the image to pdf (and fix the .tex file accordingly), typesetting from TextMate works too. I tried running rungs with parameters specified in the error message, and got valid .pdf file with image as a result. I compared .log files from typesetting in TextMate and in console, they are absolutely identical except for this error message (in particular, version of xelatex is the same). Does anyone know what can cause this? Please tell me if you need any additional information. Thank you in advance.

    Read the article

  • Network external hard drive reports not enough free space

    - by mzhang
    I'm running an Ubuntu (10.04) Samba server on a local network. The server has a 50GB internal drive with only 24MB free. I've shared a folder /samba from that drive. I also have a 1TB NTFS external hard drive mounted to the system. There is a symbiotic link from the Samba shared folder on the nearly-full internal drive to the plenty-of-free-space external drive (i.e. /samba/external_hd). I wish to copy a 3.25GB folder into the (remote) external hard drive, via a Mac (10.6.8). The Mac reports (correctly) that there's 24MB free on the server, and so will not let me copy the folder on the Mac over to the external drive (dragging the folder into /samba/external_hd), failing with a "server does not have enough free space" error. However, it seems that I can still scp the folder into the external drive, via the symbolic link. Is there a reason as to why this is happening (and are there any ways to prevent it)? Is this even good practice (to mount a drive and link into the directory)?

    Read the article

  • Route all traffic of home network through VPN

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

  • Understanding Netbook Partitions & UNR Installation

    - by Wesley
    Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I'm just looking at the Disk Management right now (in Windows XP) and I'm trying to understand what partition holds what. There is "Local Disk (C:)" which is 40GB, "RECOVERY" (no drive letter) which is 6GB and then "TEMP_PART01 (D:)" which is 103.05GB. XP is installed on Local Disk (C:) and I've only used this hard drive for all my files, etc. Recovery is recovery... probably not removable anyways. Now, what bugs me is the TEMP_PART01 (D:) partition, which contains quite a bit of random junk, such as EULA text documents, an "external installer", UI Wrapper Resource DLLs, a "VC_RED" Windows Installer Package and a few more files. I have no clue what any of it means, but I'm assuming that this was probably stuff that could have been on the Local Disk (C:), along with the WINDOWS, Program Files, and Docs and Settings folder. So, how should I go about this? Should I have kept all my data on D: and left all OS related files/folders on C:? Now, I want to install Ubuntu Netbook Remix. Question is, will this install within Windows, if I want to dual boot it? If not, would I partition D: into two small chunks, one on which I would install UNR? There are basically two questions in here, but it'd be great to get answers for both! Thanks in advance.

    Read the article

  • Why would my network slow down?

    - by monkthemighty
    The network at my work has about 40 computers on it and a quite a few printers. When there are a lot of people working the network will be slow. I can test the ping between my computer and the router and it will keep rising, sometimes to the point that it times out. The router we are using is running Ubuntu on a atom processor and it has 4gb of ram. When the network slows the process Ksoftirq will be using most if not all of the processing power. I have found that Ksoftirq is a process that handles irq requests. Also when the network slows down I have captured packets from the router and using tshark and looked at it using wireshark on my laptop. With the capture show a lot of packets with TCP Dup ACK and TCP Retransmissions. The destinations of the TCP Dup and TCP retransmissions are to most of the computers on the network but there are some that are far more than others. What could this problem be caused by?

    Read the article

  • Can I use Upstart to start a script which requires the user's X session?

    - by ledneb
    I wrote a script which greps through the output of synclient to determine whether a laptop's touchpad has miraculously turned itself off (Ubuntu seems to /love/ doing this recently) and, if so, turns it back on. The script is something like this: #!/bin/bash while true ; do if [ `synclient | grep -e"TouchpadOff[\s]*1" | wc -l` -ge 1 ] ; then synclient TouchpadOff=0 fi sleep(3) done (I don't have the laptop to hand right now but you get the point! I will update later when I'm at my laptop if that's incorrect) So I tried running this as an upstart script so my touchpad can heal itself without any interaction. But it seems synclient doesn't find the current user's X session when my script is upstart'ed. I tried running it by using something like su -c myscript.sh ledneb in my script stanza, but to no avail. Should I be looking in the direction of /etc/X11/xinit/xinitrc rather than upstart? Is there a proper way to have this script run in the context of the current (or even a hard-coded) user's x session?

    Read the article

  • very slow connection to ssh server from client (but not other servers)

    - by AntonOfTheWoods
    I have an Ubuntu 12.04 laptop that is taking so long to connect to various servers (in different data centres) that it seems like a bit of a lottery whether I'll actually get a connection. If I connect to the servers between themselves it's instantaneous, and I've set UseDNS no AddressFamily inet On the servers I'm connecting to (and rebooted for good measure). I also put in the reverse DNS+IP of the cable connection I'm connecting from. If I connect from the laptop via telnet: telnet my.server 22 Then the connection is also instantaneous, so it doesn't appear to be a problem with an intervening firewall. I have the same behaviour whether I connect with the IP, a short name in my hosts or the FQDN. I'm connecting with a 50mbps (cable, sync) connection so that doesn't appear to be the problem, and when I do finally get a connection then it's a good, quick, stable one. I have tried listening on another port (8000) and that makes no difference. Web and other connections from the laptop to the machine are also very good. Does anyone have any ideas here?

    Read the article

  • Route all traffic of home network through VPN [migrated]

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

  • Grub Autostart with timeout

    - by BetaRide
    On Ubuntu 10.4 LTS I want Grub to start the default OS after 5 Seconds. I'd like to see the output of the startup scripts. Currently grub wait forever until I hit return and the output of the startup scripts isn't visible. Can someone tell me how I have to configure /etc/default/grub or any other setups? I tried to play with GRUB_TIMEOUT and GRUB_DEFAULT and did a sudo update-grub afterwards, but nothing changed. Any ideas? # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=5 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" GRUB_SAVEDEFAULT=true # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux # GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_LINUX_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1"

    Read the article

  • With Ubuntu 12.04 unlike 11.04 Wine installed application start menu links are missing

    - by Ron Whites
    With Ubuntu 12.04 and wine 1.4 unlike ubuntu 11.04 with wine 1.2.2 installed application start menu links are missing. For instance with Ubuntu 11.04 including Wine I can install one of our Windows applications and then can go to Applications Wine Programs Semantic Designs TestCoverage Documentation to bring up the documentation for how to run our tool. Unfortunately with Ubuntu 12.04 the Applications menu is gone and going to Dash I do see "Recent Apps and more apps" but my installed Wine application and related documentation link is shown present, even though the wine uninstaller shows in present. I found this online suggestion and tried using the gnome "main menu"... Windows key to launch the Dash. Enter "Main Menu" in the search field and open the old Edit Main Menu app. Select the Category (aka Unity Dash Filter) you want the item in. Name the Dash/Launcher Item Add the Command to launch said app With "mainmenu" then get down to the TestCoverage Documentation and I could see a command link in properties of .. env WINEPREFIX="/home/sdtest/.wine" wine C:\windows\command\start.exe /Unix /home/sdtest/.wine/dosdevices/c:/users/sdtest/Start\ Menu/Programs/Semantic\ Designs/Test\ Coverage/Java\ 1.7\ Documentation.lnk BUT I could not execute this link to view the installed documentation. So I copied the link properties into a file, set it as executable, and ran it as a bash script and the documentation came up! So why can't I use this link under main menu?

    Read the article

  • Multiple SSL certificates on one server

    - by Kyle O'Brien
    We're hosting two websites on our fairly tiny but dedicated production server. Both website require SSL authentication. So, we have virtualhosts set up for both of them. They both reference their own domain.key, domain.crt and domain.intermediate.crt files. Each CSR and certificate file for each site was setup using its own unique information and nothing is shared between them (other than the server itself) However, which ever site's symbolic link (set up in /etc/apache2/sites-enabled) is reference first, is the site who's certificate is referenced even if we're visiting the second site. So for example, assume our companies are Cadbury and Nestle. We set up both sites with their own certificates but we create Cadbury's symbolic link in apache's site-enabled folder first and then Nestle's. You can visit Nestle perfectly fine but if you check the certificate installation, it reference's Cadbury's certificate. We're hosting these websites on a dedicated Ubuntu 12.04.3 LTS server. Both certificates are provided by Thawte.com. I came across a few potential solutions with no degree of success. I'm hoping someone else has a decent solution? Thanks Edit: The only other solution that seems to have provided success to some people is using SNI with Apache. However, the setups here didn't seem to coincide with our setup at all.

    Read the article

  • Apache Virtualhosts with PHP and custom logs - how to isolate PHP errors?

    - by Repox
    I'm trying to setup a simple hosting enviroment for my application on an Ubuntu server. I created a virtualhost like this: <VirtualHost *:80> ServerAdmin [email protected] ServerName www.example.com ServerAlias example.com DocumentRoot /home/owner/example.com/docs <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/owner/example.com/docs/> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /home/owner/example.com/logs/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /home/owner/example.com/logs/access.log combined php_flag log_errors on php_value error_log /home/owner/example.com/logs/php-error.log </VirtualHost> Now, my problem is that PHP errors and warnings are thrown in the error.log - not the php-error.log as I was hoping. How can achieve this?

    Read the article

  • Disk (EXT4) suddenly empty without any sign of why

    - by Ohnomydisk
    I have a Ubuntu 10.04 server with several disks in it. The disks are setup with a union filesystem, which presents them all as one logical /home. A few days ago, one of the disks appears to have suddenly 'become empty', for lack of better explanation. The amount of data on the /home mount almost halved within minutes - the disk appears to have had just over 400 GB of data prior to 'becoming empty'. I have absolutely no idea what happened. I was not using the server at the other time, but there are half a dozen other users who may have been (without root access and without the ability to hose a whole disk). I've ran SMART tests on the disk and it comes back clean. The filesystem checks fine (it has 12 GB used now, as some user software continued downloading after the incident). All I know is that around around midnight on October 19, the disk usage changed dramatically: The data points are every 15 minutes, and the full loss occured between captures: 2012-10-18 23:58:03.399647 - has 953.97/2059.07 GB [46.33 percent] 2012-10-19 00:13:15.909010 - has 515.18/2059.07 GB [25.02 percent] Other than that, I have not much to go off :-( I know that: There's nothing interesting in log files at that time Nobody appeared to be logged in via SSH at the time it occured (most users do not even use SSH) The server was online through whatever occured (3 months uptime) None of the other disks were affected and everything else on the server looks completely normal I have tried using "extundelete" on the disk and it didn't really find anything (some temporary files, but they looked new anyway) I am completely at a loss to what could have caused this. I was initially thinking maybe root escalation exploit, but even if someone did maliciously "rm" the disk contents, it would take more than 15 minutes for 400 GB?

    Read the article

  • windows symbolic file links arn't followed through network access

    - by fpdragon
    I have a server with win7 and a big share on C:\share In this share there are many symbolic links to files on other local disks like C:\share\file.txt(symlink) <- D:\file.txt I can access the file over: C:\share\file.txt \server\share\file.txt but if I try to access from an other pc I can't open the file. I'm able to delete, rename ... the link but it seems that the symbolic link isn't processed by the server. Can I change something with cifs to make this work? I already checked the acls of the link and the file and set them to allow everybody everything. I also can access the file with d$. Hope there is a solution...

    Read the article

  • Move hibernate file to a different drive

    - by Kamarey
    Is it possible to move a Windows hibernate file to a different drive? E.g. if I have Windows installed on C, I want it's hibernate file be on D. Eee... just thought that I wanted to ask this question about hibernate file, not the page file. Don't know where the page file came from. Sorry:) So the question is about hibernate file. But no problems with all answers about page file. (Edit: The original question title was "Move page file to a different drive")

    Read the article

  • creating objects from trivial graph format text file. java. dijkstra algorithm.

    - by user560084
    i want to create objects, vertex and edge, from trivial graph format txt file. one of programmers here suggested that i use trivial graph format to store data for dijkstra algorithm. the problem is that at the moment all the information, e.g., weight, links, is in the sourcecode. i want to have a separate text file for that and read it into the program. i thought about using a code for scanning through the text file by using scanner. but i am not quite sure how to create different objects from the same file. could i have some help please? the file is v0 Harrisburg v1 Baltimore v2 Washington v3 Philadelphia v4 Binghamton v5 Allentown v6 New York # v0 v1 79.83 v0 v5 81.15 v1 v0 79.75 v1 v2 39.42 v1 v3 103.00 v2 v1 38.65 v3 v1 102.53 v3 v5 61.44 v3 v6 96.79 v4 v5 133.04 v5 v0 81.77 v5 v3 62.05 v5 v4 134.47 v5 v6 91.63 v6 v3 97.24 v6 v5 87.94 and the dijkstra algorithm code is Downloaded from: http://en.literateprograms.org/Special:Downloadcode/Dijkstra%27s_algorithm_%28Java%29 */ import java.util.PriorityQueue; import java.util.List; import java.util.ArrayList; import java.util.Collections; class Vertex implements Comparable<Vertex> { public final String name; public Edge[] adjacencies; public double minDistance = Double.POSITIVE_INFINITY; public Vertex previous; public Vertex(String argName) { name = argName; } public String toString() { return name; } public int compareTo(Vertex other) { return Double.compare(minDistance, other.minDistance); } } class Edge { public final Vertex target; public final double weight; public Edge(Vertex argTarget, double argWeight) { target = argTarget; weight = argWeight; } } public class Dijkstra { public static void computePaths(Vertex source) { source.minDistance = 0.; PriorityQueue<Vertex> vertexQueue = new PriorityQueue<Vertex>(); vertexQueue.add(source); while (!vertexQueue.isEmpty()) { Vertex u = vertexQueue.poll(); // Visit each edge exiting u for (Edge e : u.adjacencies) { Vertex v = e.target; double weight = e.weight; double distanceThroughU = u.minDistance + weight; if (distanceThroughU < v.minDistance) { vertexQueue.remove(v); v.minDistance = distanceThroughU ; v.previous = u; vertexQueue.add(v); } } } } public static List<Vertex> getShortestPathTo(Vertex target) { List<Vertex> path = new ArrayList<Vertex>(); for (Vertex vertex = target; vertex != null; vertex = vertex.previous) path.add(vertex); Collections.reverse(path); return path; } public static void main(String[] args) { Vertex v0 = new Vertex("Nottinghill_Gate"); Vertex v1 = new Vertex("High_Street_kensignton"); Vertex v2 = new Vertex("Glouchester_Road"); Vertex v3 = new Vertex("South_Kensignton"); Vertex v4 = new Vertex("Sloane_Square"); Vertex v5 = new Vertex("Victoria"); Vertex v6 = new Vertex("Westminster"); v0.adjacencies = new Edge[]{new Edge(v1, 79.83), new Edge(v6, 97.24)}; v1.adjacencies = new Edge[]{new Edge(v2, 39.42), new Edge(v0, 79.83)}; v2.adjacencies = new Edge[]{new Edge(v3, 38.65), new Edge(v1, 39.42)}; v3.adjacencies = new Edge[]{new Edge(v4, 102.53), new Edge(v2, 38.65)}; v4.adjacencies = new Edge[]{new Edge(v5, 133.04), new Edge(v3, 102.53)}; v5.adjacencies = new Edge[]{new Edge(v6, 81.77), new Edge(v4, 133.04)}; v6.adjacencies = new Edge[]{new Edge(v0, 97.24), new Edge(v5, 81.77)}; Vertex[] vertices = { v0, v1, v2, v3, v4, v5, v6 }; computePaths(v0); for (Vertex v : vertices) { System.out.println("Distance to " + v + ": " + v.minDistance); List<Vertex> path = getShortestPathTo(v); System.out.println("Path: " + path); } } } and the code for scanning file is import java.util.Scanner; import java.io.File; import java.io.FileNotFoundException; public class DataScanner1 { //private int total = 0; //private int distance = 0; private String vector; private String stations; private double [] Edge = new double []; /*public int getTotal(){ return total; } */ /* public void getMenuInput(){ KeyboardInput in = new KeyboardInput; System.out.println("Enter the destination? "); String val = in.readString(); return val; } */ public void readFile(String fileName) { try { Scanner scanner = new Scanner(new File(fileName)); scanner.useDelimiter (System.getProperty("line.separator")); while (scanner.hasNext()) { parseLine(scanner.next()); } scanner.close(); } catch (FileNotFoundException e) { e.printStackTrace(); } } public void parseLine(String line) { Scanner lineScanner = new Scanner(line); lineScanner.useDelimiter("\\s*,\\s*"); vector = lineScanner.next(); stations = lineScanner.next(); System.out.println("The current station is " + vector + " and the destination to the next station is " + stations + "."); //total += distance; //System.out.println("The total distance is " + total); } public static void main(String[] args) { /* if (args.length != 1) { System.err.println("usage: java TextScanner2" + "file location"); System.exit(0); } */ DataScanner1 scanner = new DataScanner1(); scanner.readFile(args[0]); //int total =+ distance; //System.out.println(""); //System.out.println("The total distance is " + scanner.getTotal()); } }

    Read the article

  • File Encryption Operation

    - by kiruthika
    Hi All, I have doubt in gpg command operation . Actually we are using gpg command for encrypting the file . File.txt has following things. Testing hello world My security things. Now I am doing the file encryption for File.txt gpg --symmetric File.txt Now I got File.txt.gpg file , which is encrypted. My doubt, if some open that file and did someone changes in that I am not able get file content . It says my following things. $ gpg --decrypt File.txt.gpg gpg: no valid OpenPGP data found. gpg: decrypt_message failed: eof I want my file content , even though some body has done changes in that . what should I do for this problem....?

    Read the article

< Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >