Search Results

Search found 13401 results on 537 pages for 'double checked'.

Page 486/537 | < Previous Page | 482 483 484 485 486 487 488 489 490 491 492 493  | Next Page >

• Has the hardware in my modem gone bad?

  - by Tyler Scott

  I contacted CenturyLink about my modem recently and received useless and unrelated information. The problem seems to be that the modem will no longer save settings, the web interface is unusable except in internet explorer for some reason, and the modem keeps resetting. CenturyLink claimed it had to do with signal strength but I checked and it is currently between good and outstanding according to this. All of the lights remain green even when it starts acting up and I lose internet and shortly before it crashes and reboots. Does anyone have any idea what is going on or what I can do to fix it? (Asking CenturyLink again is obviously not going to help.) Update 1: Accessing the syslog from the web interface causes a crash. After it reboots, the log looks like as follows: 01/01/1970 12:01:29 AM Ethernet Ethernet client connected ,ip(192.168.0.2), mac(1c:6f:65:4c:6d:3b) 01/01/1970 12:01:38 AM Wireless 802.11 client connected ,ip(192.168.0.18), mac(d0:df:c7:c2:73:ca) 01/01/1970 12:01:41 AM System Event Line 0: VDSL2 link up, Bearer 0, us=20128, ds=40127 01/01/1970 12:01:43 AM dhcp6s[2028] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:50 AM dhcp6s[2469] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:52 AM radvd[2306] poll error: Interrupted system call 01/01/1970 12:01:56 AM PPP Link PPP server detected. 01/01/1970 12:01:56 AM PPP Link PPP session established. 01/01/1970 12:01:56 AM PPP Link PPP LCP UP. 01/01/1970 12:01:56 AM System Event Received valid IP address from server. Connection UP. 06/05/2014 08:16:01 AM radvd[2511] poll error: Interrupted system call 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM dhcp6s[3236] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 06/05/2014 08:16:08 AM Wireless 802.11 client connected ,ip(192.168.0.7), mac(44:6d:57:c4:d7:08) I also get it to crash on various other pages. I am guessing the web server is unstable.

  Read the article

• Server Admin is not allowing me to configure DNS

  - by Clinton Blackmore

  We have a Mac OS X 10.5.8 Server running DNS (and a few other services). When I connect to it (using Server Admin 10.5.3 [which comes from the Server Admin 10.5.7 tools]), and click to look at the DNS settings, all appears normal -- it shows many reverse entries and two top-level domains. However, when I select one of our domains and open the disclosure triangle, the list is empty! [There should be over a dozen entries, and the reverse entries do show up.] If I then tell it I want to add, say, an A Record to the domain, almost everything disappears -- and I am left with a list showing our two domains, one with a disclosure triangle underneath it showing a single entry, and one reverse entry to correspond to the new A record. named appears to be working fine. DNS names resolve. It appears to simply be that Server Admin is having problems with the data on the computer. No one here would have manually created a DNS entry. Now, while I think I've backed up the DNS (I backed up /var/named/, /etc/named.conf, and /etc/dns/, as mentioned here), I'm really not sure if just replacing the files would restore the DNS settings we have if things go south. I am contemplating going to settings and changing the log level from "Information" to "Debug", but 1) I am just a little concerned that it might write a bad configuration to the disk, and 2) I think it would only affect named and not Server Admin, and, so far as I can tell, named is not having a problem. (Nothing looks strange in /Library/Logs/named.log when I open it via Console/Terminal. Oddly, though, when I click on the 'log' button for DNS in Server Admin, I see no text at all, just a fully white window. When I look at one of our secondary DNS servers, I am able to see the log file through Server Admin.) This entry appears in the system log when I run Server Admin on the server: Jun 17 09:02:08 od1 Server Admin[3892]: Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription It seems to occur after I've looked at DNS, look at another service, and then click back on DNS. Think that the most likely cause is a corrupt configuration file, I glanced through all the files that I backed up, and none of them is obviously gobbledygook. Here are some oddities I find when running Server Admin from a remote computer to manage the DNS. When I click to see the log file for DNS, the server starts writing messages like these to its system.log: Jun 17 09:59:04 od1 kernel[0]: Limiting open port RST response from 252 to 250 packets per second Jun 17 09:59:06 od1 kernel[0]: Limiting open port RST response from 258 to 250 packets per second This stops when I click on a different service. The inderterminate progress indicator (the spinning wheel that appears beside the "Revert" and "Save" buttons in the bottom-right corner of Server Admin) looks really strange. As far as I can tell, instead of just spinning and waiting, it is being told to start spinning repeatedly, resulting in a jerky animation. Here are some of the messages being logged on the computer running Server Admin: At startup: *** ERROR: -[GRAxes computeLayout]:1124 - plotRect height = 0.000000 <= 0.0 *** *** ERROR: -[GRChartView computeLayout]:1194 - Layout for overlay axes (0x18758f50) failed. *** (These messages don't concern me too much as they go away for a while if you delete ~/Library/Preferences/com.apple.ServerAdmin.plist). At shutdown: 2010-06-17 10:02:17.202 Server Admin[7770:10b] *** -[GroupTextField windowDidResignKey:]: unrecognized selector sent to instance 0x16e12490 More concerning are these messages: 2010-06-17 09:59:47.269 Server Admin[7770:10b] Unexpected call to doMarkConfigurationAsDirty by 'DNS' plugin during updateConfigurationViewFromDescription Server Admin(7770,0xb0453000) malloc: *** error for object 0x1c115390: double free *** set a breakpoint in malloc_error_break to debug 2010-06-17 10:01:00.795 Server Admin[7770:10b] *** -[ServiceEntry sessionHost]: unrecognized selector sent to instance 0x2af500 Any thoughts on: what the problem is how I can troubleshoot it or how to fix it? If I do need to wipe out DNS and restart, is there a good way to do this?

  Read the article

• MongoDB Crashed,Not able to start it again

  - by Kevin Parker

  Mongodb fail to start after showing this error...and not able to start it again..?Can u help me find out? *** glibc detected *** /usr/lib/mongodb/mongo: corrupted double-linked list: 0x000000000f750b50 *** Mon Nov 26 19:01:29 mongo got signal 11 (Segmentation fault), stack trace: ======= Backtrace: ========= /lib/x86_64-linux-gnu/libc.so.6(+0x788d6)[0x2b2db94198d6] /lib/x86_64-linux-gnu/libc.so.6(+0x7a841)[0x2b2db941b841] /lib/x86_64-linux-gnu/libc.so.6(cfree+0x73)[0x2b2db941f603] /usr/lib/mongodb/mongo(_ZN5boost6detail17sp_counted_impl_pIN5mongo7BSONObj6HolderEE7disposeEv+0x12)[0x45bd92] /usr/lib/mongodb/mongo(_ZN5boost6detail12shared_countD2Ev+0x49)[0x45d319] /lib/x86_64-linux-gnu/libc.so.6(exit+0xe1)[0x2b2db93da961] /usr/lib/mongodb/mongo(_Z10quitNicelyi+0x53)[0x458043] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfc60)[0x2b2db753fc60] /lib/x86_64-linux-gnu/libc.so.6(kill+0x7)[0x2b2db93d4fe7] /lib/libreadline.so.6(+0x25888)[0x2b2db889b888] /lib/libreadline.so.6(rl_getc+0x5e)[0x2b2db889d9de] /lib/libreadline.so.6(rl_read_key+0xf8)[0x2b2db889e0c8] /lib/libreadline.so.6(readline_internal_char+0x61)[0x2b2db8889061] /lib/libreadline.so.6(readline+0x55)[0x2b2db88895b5] /usr/lib/mongodb/mongo(_Z13shellReadlinePKci+0x8a)[0x45694a] /usr/lib/mongodb/mongo(_Z5_mainiPPc+0x1506)[0x45a1a6] /usr/lib/mongodb/mongo(main+0x26)[0x45b1d6] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xff)[0x2b2db93bfeff] /usr/lib/mongodb/mongo[0x456449] ======= Memory map: ======== 00400000-0055c000 r-xp 00000000 fd:03 32385496 /usr/lib/mongodb/mongo 0075c000-00762000 r--p 0015c000 fd:03 32385496 /usr/lib/mongodb/mongo 00762000-00765000 rw-p 00162000 fd:03 32385496 /usr/lib/mongodb/mongo 00765000-00767000 rw-p 00765000 00:00 0 0f74e000-0f961000 rw-p 0f74e000 00:00 0 [heap] 2b2db730d000-2b2db732e000 r-xp 00000000 fd:03 32112840 /lib/x86_64-linux-gnu/ld-2.13.so 2b2db732e000-2b2db7331000 rw-p 2b2db732e000 00:00 0 2b2db7331000-2b2db7351000 rwxp 2b2db7331000 00:00 0 2b2db752d000-2b2db752e000 r--p 00020000 fd:03 32112840 /lib/x86_64-linux-gnu/ld-2.13.so 2b2db752e000-2b2db7530000 rw-p 00021000 fd:03 32112840 /lib/x86_64-linux-gnu/ld-2.13.so 2b2db7530000-2b2db7548000 r-xp 00000000 fd:03 32112843 /lib/x86_64-linux-gnu/libpthread-2.13.so 2b2db7548000-2b2db7748000 ---p 00018000 fd:03 32112843 /lib/x86_64-linux-gnu/libpthread-2.13.so 2b2db7748000-2b2db7749000 r--p 00018000 fd:03 32112843 /lib/x86_64-linux-gnu/libpthread-2.13.so 2b2db7749000-2b2db774a000 rw-p 00019000 fd:03 32112843 /lib/x86_64-linux-gnu/libpthread-2.13.so 2b2db774a000-2b2db774e000 rw-p 2b2db774a000 00:00 0 2b2db774e000-2b2db7836000 r-xp 00000000 fd:03 32380634 /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.14 2b2db7836000-2b2db7a35000 ---p 000e8000 fd:03 32380634 /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.14 2b2db7a35000-2b2db7a3d000 r--p 000e7000 fd:03 32380634 /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.14 2b2db7a3d000-2b2db7a3f000 rw-p 000ef000 fd:03 32380634 /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.14 2b2db7a3f000-2b2db7a55000 rw-p 2b2db7a3f000 00:00 0 2b2db7a55000-2b2db7a58000 r-xp 00000000 fd:03 32244866 /usr/lib/libboost_system.so.1.42.0 2b2db7a58000-2b2db7c57000 ---p 00003000 fd:03 32244866 /usr/lib/libboost_system.so.1.42.0 2b2db7c57000-2b2db7c58000 r--p 00002000 fd:03 32244866 /usr/lib/libboost_system.so.1.42.0 2b2db7c58000-2b2db7c59000 rw-p 00003000 fd:03 32244866 /usr/lib/libboost_system.so.1.42.0 2b2db7c59000-2b2db7c6d000 r-xp 00000000 fd:03 32244882 /usr/lib/libboost_thread.so.1.42.0 2b2db7c6d000-2b2db7e6c000 ---p 00014000 fd:03 32244882 /usr/lib/libboost_thread.so.1.42.0 2b2db7e6c000-2b2db7e6e000 r--p 00013000 fd:03 32244882 /usr/lib/libboost_thread.so.1.42.0 2b2db7e6e000-2b2db7e6f000 rw-p 00015000 fd:03 32244882 /usr/lib/libboost_thread.so.1.42.0 2b2db7e6f000-2b2db7e83000 r-xp 00000000 fd:03 32244880 /usr/lib/libboost_filesystem.so.1.42.0 2b2db7e83000-2b2db8082000 ---p 00014000 fd:03 32244880 Mon Nov 26 19:01:29 mongo got signal 6 (Aborted), stack trace: Mon Nov 26 19:01:29 0x45e03f 0x457694 0x2b2db93d4d80 0x2b2db93d4d05 0x2b2db93d8ab6 0x2b2db940fa9b 0x2b2db94198d6 0x2b2db941b841 0x2b2db941f603 0x45bd92 0x45d319 0x2b2db93da961 0x458043 0x2b2db753fc60 0x2b2db93d4fe7 0x2b2db889b888 0x2b2db889d9de 0x2b2db889e0c8 0x2b2db8889061 0x2b2db88895b5 /usr/lib/mongodb/mongo(_ZN5mongo15printStackTraceERSo+0x1f) [0x45e03f] /usr/lib/mongodb/mongo(_Z12quitAbruptlyi+0x324) [0x457694] /lib/x86_64-linux-gnu/libc.so.6(+0x33d80) [0x2b2db93d4d80] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35) [0x2b2db93d4d05] /lib/x86_64-linux-gnu/libc.so.6(abort+0x186) [0x2b2db93d8ab6] /lib/x86_64-linux-gnu/libc.so.6(+0x6ea9b) [0x2b2db940fa9b] /lib/x86_64-linux-gnu/libc.so.6(+0x788d6) [0x2b2db94198d6] /lib/x86_64-linux-gnu/libc.so.6(+0x7a841) [0x2b2db941b841] /lib/x86_64-linux-gnu/libc.so.6(cfree+0x73) [0x2b2db941f603] /usr/lib/mongodb/mongo(_ZN5boost6detail17sp_counted_impl_pIN5mongo7BSONObj6HolderEE7disposeEv+0x12) [0x45bd92] /usr/lib/mongodb/mongo(_ZN5boost6detail12shared_countD2Ev+0x49) [0x45d319] /lib/x86_64-linux-gnu/libc.so.6(exit+0xe1) [0x2b2db93da961] /usr/lib/mongodb/mongo(_Z10quitNicelyi+0x53) [0x458043] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfc60) [0x2b2db753fc60] /lib/x86_64-linux-gnu/libc.so.6(kill+0x7) [0x2b2db93d4fe7] /lib/libreadline.so.6(+0x25888) [0x2b2db889b888] /lib/libreadline.so.6(rl_getc+0x5e) [0x2b2db889d9de] /lib/libreadline.so.6(rl_read_key+0xf8) [0x2b2db889e0c8] /lib/libreadline.so.6(readline_internal_char+0x61) [0x2b2db8889061] /lib/libreadline.so.6(readline+0x55) [0x2b2db88895b5] Any One have any idea?Why MongoDb Crashed? OS:ubuntu 11.04 2.6.32-pony6-3 RAM:2 GB

  Read the article

• 401 - Unauthorized On Server 2008 R2 IIS 7.5

  - by mxmissile

  I have a web application deployed to Server 2008 IIS 7.5 box. From remote it gives this error: 401 - Unauthorized: Access is denied due to invalid credentials. (remote = desktops on the same LAN) Have tried several remote clients using different browsers, all the same result. (IE, FF, and Chrome) Hitting the application from the desktop of the server itself works flawlessly. However I have not tried Firebug on the server desktop. I would assume it's still issuing a 401 status code yet returning the content anyway. See Update #2. The application is using Anonymous Authentication. The application is written in .NET 4.0 Asp.Net using the MVC framework. Static content works fine, example: http://server.com/content/image.jpg Sysinternals procmon returns these 2 results for each request: FAST IO DISALLOWED and PATH NOT FOUND. I have 2 other MVC apps running fine on the same server. I have checked the security on the folders and they all match. App runs fine on a Server 2008 IIS 7.0 box. Nothing shows up in the Event log on the server related to this. Pulling my hair out here, any troubleshooting tips? UPDATE #1: This just get's more WTF as I dig. If I click on the Application in IIS Manager - Error Pages - Edit Feature Settings select Detailed Errors, the app works remotely. Not leaving this on, so problem is not solved yet, its just more confusing. UPDATE #2: Using Firebug, I see that the Status is still 401 Unauthorized, but the Response is returning the application's correct HTML. UPDATE #3 Playing around with Failed Request Tracing, here is the WARNING Request Trace that is causing the 401: ModuleName ManagedPipelineHandler Notification 128 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 0 ErrorCode 0 ConfigExceptionInfo Notification EXECUTE_REQUEST_HANDLER ErrorCode The operation completed successfully. (0x0) Update #4 Regular IIS log is showing this: #Software: Microsoft Internet Information Services 7.5 #Version: 1.0 #Date: 2010-07-20 19:17:22 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken 2010-07-20 19:17:22 10.10.1.10 GET /Purchasing/Home - 80 - 10.10.1.12 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US;+rv:1.9.2.6)+Gecko/20100625+Firefox/3.6.6 401 0 0 4414

  Read the article

• IE and Google Chrome timeout on an IIS6 hosted SSL page that Firefox handles well.

  - by Thomas

  Ok, here's the scenario: Up until a few weeks ago, none of us noticed anything wrong with the corporate website. People were using it without complaint. Then, a client complained that a specific page on the site was timing out for him, and only when he committed a POST action on a form filled with data. I checked it out, and it timed out for me, too. But, it only timed out in Google Chrome and IE, not in Firefox. Additionally, the same page, on the same server, but served from a different domain name (one not under the protection of SSL, either) does not time out under any browser. To clarify: https://www.mysite.com/changes.php times out on POST, but the same with http works fine. That distinction (SSL vs. Non-SSL) seems to be important, as nothing else has changed. Our certificate is valid, and Firefox detects no errors thrown by the page. I've looked at the Request and Response headers from the page, and they all follow the correct formats. Then, after wandering through the site, I noticed a few other things. Both IE and Chrome will frequently time out on any page that is PHP-based. They never time out on static images or html files. I've looked at the site from a variety of different servers, my home and work workstations, and my netbook. Because of that, I've discounted a viral infection, as I highly doubt a virus is going to hit every one of the machines to which I have access in exactly the same manner. My setup is: Server: Win2k3, II6, PHP 5.2.9-1. Clients: IE7, IE8, Chrome (regular and dev channel): Frequent timeouts on PHP pages. Firefox 2, Firefox 3: No timeouts. Firebug shows no errors or even lengthy periods serving the pages. I've spent 2 days searching for any tech knowledge that I can find, and my search parameters are all too general. Everyone has problems loading SSL pages in IE and Chrome for a wide variety of reasons. The infrequent nature of the timeouts and the fact that there are no errors being reported anywhere is starting to drive me insane. Does anyone have any insight on a problem like this?

  Read the article

• COPSSH RSA only authentication connection problem

  - by Siriss

  Hello all- I am trying to setup an RSA Authentication only SSH/SFTP server. The SSH will be used primarily for RDC. Everything works just fine if I use password authentication. I am using Putty Key Generator to create he keys and I have pasted the key into authorized_keys file and restarted the OpenSSH server. I am using FileZilla to test the SFTP connection as that is the most important. For my tests I have created the keys without password correction. It will not work with a standard SSH connection either. It says "Server refused our key". I have recreated the key twice double checking with a guide on google, and I am pretty sure I did it correctly. I load the key file into FileZilla under settings/SFTP and try to connect and I get the following error: Disconnected: No supported authentication methods available. I have been playing with the different settings all night and I cannot figure it out. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m PermitRootLogin no #StrictModes yes #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM no #AllowAgentForwarding yes #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /bin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no # ForceCommand cvs server Thank you so much for your help!

  Read the article

• Does this prove a network bandwidth bottleneck?

  - by Yuji Tomita

  I've incorrectly assumed that my internal AB testing means my server can handle 1k concurrency @3k hits per second. My theory at at the moment is that the network is the bottleneck. The server can't send enough data fast enough. External testing from blitz.io at 1k concurrency shows my hits/s capping off at 180, with pages taking longer and longer to respond as the server is only able to return 180 per second. I've served a blank file from nginx and benched it: it scales 1:1 with concurrency. Now to rule out IO / memcached bottlenecks (nginx normally pulls from memcached), I serve up a static version of the cached page from the filesystem. The results are very similar to my original test; I'm capped at around 180 RPS. Splitting the HTML page in half gives me double the RPS, so it's definitely limited by the size of the page. If I internally ApacheBench from the local server, I get consistent results of around 4k RPS on both the Full Page and the Half Page, at high transfer rates. Transfer rate: 62586.14 [Kbytes/sec] received If I AB from an external server, I get around 180RPS - same as the blitz.io results. How do I know it's not intentional throttling? If I benchmark from multiple external servers, all results become poor which leads me to believe the problem is in MY servers outbound traffic, not a download speed issue with my benchmarking servers / blitz.io. So I'm back to my conclusion that my server can't send data fast enough. Am I right? Are there other ways to interpret this data? Is the solution/optimization to set up multiple servers + load balancing that can each serve 180 hits per second? I'm quite new to server optimization, so I'd appreciate any confirmation interpreting this data. Outbound traffic Here's more information about the outbound bandwidth: The network graph shows a maximum output of 16 Mb/s: 16 megabits per second. Doesn't sound like much at all. Due to a suggestion about throttling, I looked into this and found that linode has a 50mbps cap (which I'm not even close to hitting, apparently). I had it raised to 100mbps. Since linode caps my traffic, and I'm not even hitting it, does this mean that my server should indeed be capable of outputting up to 100mbps but is limited by some other internal bottleneck? I just don't understand how networks at this large of a scale work; can they literally send data as fast as they can read from the HDD? Is the network pipe that big? In conclusion 1: Based on the above, I'm thinking I can definitely raise my 180RPS by adding an nginx load balancer on top of a multi nginx server setup at exactly 180RPS per server behind the LB. 2: If linode has a 50/100mbit limit that I'm not hitting at all, there must be something I can do to hit that limit with my single server setup. If I can read / transmit data fast enough locally, and linode even bothers to have a 50mbit/100mbit cap, there must be an internal bottleneck that's not allowing me to hit those caps that I'm not sure how to detect. Correct? I realize the question is huge and vague now, but I'm not sure how to condense it. Any input is appreciated on any conclusion I've made.

  Read the article

• Video memory buswidth vs video memory Bandwidth

  - by Mixxiphoid

  My current video card (9600GT) is dying and I'm searching for a new video card. Between acquiring my current one and now, I got a lot more knowledge about hardware and I want to use that to pick my new card. So I decided to not just buy some popular card blindly, but to search for a card able to handle my hardware requirements. I searched the specs at the NVidia site for the GT640 and was confused by the memory section and some questions raised. My current card's memory bus width is 256bit and has 1GB of memory. I checked Google about the importance of bus width. And all the links basically said the same 'The higher the number the more potential simultaneously traffic can be transferred'. This was already clear to me, yet there are currently a lot of new cards which are considered better than my current one with a lower bus width. To go in more detail about my question I copied the memory info from the NVidia site: GT 640 GT640 GDDR5 Memory Specs: Memory Clock 1.8 Gbps 5.0 Gbps Standard Memory Config 2048 MB 1024 MB Memory Interface DDR3 GDDR5 Memory Interface Width 128-bit 64-bit Memory Bandwidth (GB/sec) 28.5 40.0 What puzzled me is that the Memory Bandwidth seems to me the most important part, yet the lower bus width has the higher 'performance'. Is this due to the fact the memory interface is GDDR5 and is therefore able to have a higher memory clock speed (5Gbps)? If I am to buy a new video card, should I check the bus width? Memory clock? Bandwith? Amount of memory? My current card ahs 1GB memory, so I was searching for a 2GB memory card, but now I'm not so sure any more whether that is really 'better'. My main question: To me it seems that memory performance is made up by the combination of bus width and frequency. Is this true? If yes, why are there so many sites telling me I need to get a card with a high bus width? If no, then what IS important when it goes about memory performance on a video card. NOTE: The memory bandwidth is (almost) never displayed on vendor sites. How can I determine which card is better without knowing the bandwith?

  Read the article

• Why won't vyatta allow SMTP through my firewall?

  - by Solignis

  I am setting up a vyatta router on VMware ESXi, But I see to have hit a major snag, I could not get my firewall and NAT to work correctly. I am not sure what was wrong with NAT but it "seems" to be working now. But the firewall is not allowing traffic from my WAN interface (eth0) to my LAN (eth1). I can confirm its the firewall because I disabled all firewall rules and everything worked with just NAT. If put the firewalls (WAN and LAN) back in place nothing can get through to port 25. I am not really sure what the issue could be I am using pretty basic firewall rules, I wrote the rules while looking at the vyatta docs so unless there is something odd with the documentation they "should" be working. Here is my NAT rules so far; vyatta@gateway# show service nat rule 20 { description "Zimbra SNAT #1" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.17 } type source } rule 21 { description "Zimbra SMTP #1" destination { address 74.XXX.XXX.XXX port 25 } inbound-interface eth0 inside-address { address 10.0.0.17 } protocol tcp type destination } rule 100 { description "Default LAN -> WAN" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.0/24 } type source } Then here is my firewall rules, this is where I believe the problem is. vyatta@gateway# show firewall all-ping enable broadcast-ping disable conntrack-expect-table-size 4096 conntrack-hash-size 4096 conntrack-table-size 32768 conntrack-tcp-loose enable ipv6-receive-redirects disable ipv6-src-route disable ip-src-route disable log-martians enable name LAN_in { rule 100 { action accept description "Default LAN -> any" protocol all source { address 10.0.0.0/24 } } } name LAN_out { } name LOCAL { rule 100 { action accept state { established enable } } } name WAN_in { rule 20 { action accept description "Allow SMTP connections to MX01" destination { address 74.XXX.XXX.XXX port 25 } protocol tcp } rule 100 { action accept description "Allow established connections back through" state { established enable } } } name WAN_out { } receive-redirects disable send-redirects enable source-validation disable syn-cookies enable SIDENOTE To test for open ports I have using this website, http://www.yougetsignal.com/tools/open-ports/, it showed port 25 as open without the firewall rules and closed with the firewall rules. UPDATE Just to see if the firewall was working properly I made a rule to block SSH from the WAN interface. When I checked for port 22 on my primary WAN address it said it was still open even though I outright blocked the port. Here is the rule I used; rule 21 { action reject destination { address 74.219.80.163 port 22 } protocol tcp } So now I am convinced either I am doing something wrong or the firewall is not working like it should.

  Read the article

• Small Business Server services will not start, and remote desktop and UAC are broken

  - by Stephen Jennings

  Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

  Read the article

• Where to get laptop replacement parts?

  - by wai

  I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

  Read the article

• Email server can send internal, but messages never arrive at external recipients

  - by Chase Florell

  I'm running MailEnable on my server, and have been for many years. Recently we had an attack on our server, and I was able to close the hole. Since then, our mail server doesn't seem to be sending mail out. If I send an email from myself to another account hosted on the server, the email arrives as expected. If I send an email from my gmail account to my business account, the email also arrives as expected The problem comes when I send from my business account to an external domain I tried the following Gmail.com Hotmail.com Shaw.ca When I send to any of the above The message leaves my client as expected, The logs appear to accept and forward on the message The SMTP outbound que is empty The message never arrives I have checked our domain with mxtoolbox.com senderbase.org And neither of them are reporting any problems with our domain. I have ensured that port 25 is open (along with the other standard ports) Here is one of the log entries from the SMTP connector 11/05/13 12:10:00 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 220 mx1.example.com ESMTP MailEnable Service, Version: 6.81--6.81 ready at 11/05/13 12:10:00 0 0 11/05/13 12:10:00 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 EHLO EHLO ASSP.nospam 250-mx1.example.com [127.0.0.1], this server offers 6 extensions 159 18 11/05/13 12:10:00 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 EHLO EHLO ASSP.nospam 250-mx1.example.com [127.0.0.1], this server offers 6 extensions 159 18 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 AUTH AUTH LOGIN 334 VXNlcm5hbWU6 18 12 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 AUTH {blank} 334 UGFzc3dvcmQ6 18 26 [email protected] 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 AUTH Y29sb25lbGZhY2U= 235 Authenticated 19 18 [email protected] 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 MAIL MAIL FROM:<[email protected]> 250 Requested mail action okay, completed 43 31 [email protected] 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 RCPT RCPT TO:<[email protected]> 250 Requested mail action okay, completed 43 35 [email protected] 11/05/13 12:10:01 SMTP-IN 494C0AF55CD0400FB90FD5E6525BC885.MAI 1312 127.0.0.1 DATA DATA 354 Start mail input; end with <CRLF>.<CRLF> 46 6 [email protected] Here are the headers of the sent message X-Assp-Version: 1.7.5.7(1.0.07) on ASSP.nospam X-Assp-ID: ASSP.nospam 78601-04523 X-Assp-Intended-For: [email protected] X-Assp-Envelope-From: [email protected] Received: from [10.10.1.101] ([68.147.245.149] helo=[10.10.1.101]) with IPv4:587 by ASSP.nospam; 5 Nov 2013 12:10:00 -0700 From: Chase Florell <[email protected]> Content-Type: text/plain Content-Transfer-Encoding: 7bit Subject: Test Message Message-Id: <[email protected]> Date: Tue, 5 Nov 2013 12:10:18 -0700 To: Chase Florell <[email protected]> Mime-Version: 1.0 (Mac OS X Mail 7.0 \(1816\)) X-Mailer: Apple Mail (2.1816) . Where else can I check to see if there is something broken? What could cause a problem like this whereby the message appears to send, but never arrives, and never returns a bounce?

  Read the article

• php-fpm + persistent sockets = 502 bad gateway

  - by leeoniya

  Put on your reading glasses - this will be a long-ish one. First, what I'm doing. I'm building a web-app interface for some particularly slow tcp devices. Opening a socket to them takes 200ms and an fwrite/fread cycle takes another 300ms. To reduce the need for both of these actions on each request, I'm opening a persistent tcp socket which reduces the response time by the aforementioned 200ms. I was hoping PHP-FPM would share the persistent connections between requests from different clients (and indeed it does!), but there are some issues which I havent been able to resolve after 2 days of interneting, reading logs and modifying settings. I have somewhat narrowed it down though. Setup: Ubuntu 13.04 x64 Server (fully updated) on Linode PHP 5.5.0-6~raring+1 (fpm-fcgi) nginx/1.5.2 Relevent config: nginx worker_processes 4; php-fpm/pool.d pm = dynamic pm.max_children = 2 pm.start_servers = 2 pm.min_spare_servers = 2 Let's go from coarse to fine detail of what happens. After a fresh start I have 4x nginx processes and 2x php5-fpm processes waiting to handle requests. Then I send requests every couple seconds to the script. The first take a while to open the socket connection and returns with the data in about 500ms, the second returns data in 300ms (yay it's re-using the socket), the third also succeeds in about 300ms, the fourth request = 502 Bad Gateway, same with the 5th. Sixth request once again returns data, except now it took 500ms again. The process repeats for several cycles after which every 4 requests result in 2x 502 Bad Gateways and 2x 500ms Data responses. If I double all the fpm pool values and have 4x php-fpm processes running, the cycles settles in with 4x successful 500ms responses followed by 4x Bad Gateway errors. If I don't use persistent sockets, this issue goes away but then every request is 500ms. What I suspect is happening is the persistent socket keeps each php-fpm process from idling and ties it up, so the next one gets chosen until none are left and as they error out, maybe they are restarted and become available on the next round-robin loop ut the socket dies with the process. I haven't yet checked the 'slowlog', but the nginx error log shows lots of this: *188 recv() failed (104: Connection reset by peer) while reading response header from upstream, client:... All the suggestions on the internet regarding fixing nginx/php-fpm/502 bad gateway relate to high load or fcgi_pass misconfiguration. This is not the case here. Increasing buffers/sizes, changing timeouts, switching from unix socket to tcp socket for fcgi_pass, upping connection limits on the system....none of this stuff applies here. I've had some other success with setting pm = ondemand rather than dynamic, but as soon as the initial fpm-process gets killed off after idling, the persistent socket is gone for all subsequent php-fpm spawns. For the php script, I'm using stream_socket_client() with a STREAM_CLIENT_PERSISTENT flag. A while/stream_select() loop to detect socket data and fread($sock, 4096) to grab the data. I don't call fclose() obviously. If anyone has some additional questions or advice on how to get a persistent socket without tying up the php-fpm processes beyond the request completion, or maybe some other things to try, I'd appreciate it. some useful links: Nginx + php-fpm - recv() error Nginx + php-fpm "504 Gateway Time-out" error with almost zero load (on a test-server) Nginx + PHP-FPM "error 104 Connection reset by peer" causes occasional duplicate posts http://www.linuxquestions.org/questions/programming-9/php-pfsockopen-552084/ http://stackoverflow.com/questions/14268018/concurrent-use-of-a-persistent-php-socket http://devzone.zend.com/303/extension-writing-part-i-introduction-to-php-and-zend/#Heading3 http://stackoverflow.com/questions/242316/how-to-keep-a-php-stream-socket-alive http://php.net/manual/en/install.fpm.configuration.php https://www.google.com/search?q=recv%28%29+failed+%28104:+Connection+reset+by+peer%29+while+reading+response+header+from+upstream+%22502%22&ei=mC1XUrm7F4WQyAHbv4H4AQ&start=10&sa=N&biw=1920&bih=953&dpr=1

  Read the article

• Multiple data centers and HTTP traffic: DNS Round Robin is the ONLY way to assure instant fail-over?

  - by vmiazzo

  Hi, Multiple A records pointing to the same domain seem to be used almost exclusively to implement DNS Round Robin as a cheap load balancing technique. The usual warning against DNS RR is that it is not good for high availability. When 1 IP goes down clients will continue to use it for minutes. A load balancer is often suggested as a better choice. Both claims are not completely true: When the traffic is HTTP then, most of the HTML browsers are able to automatically try the next A record if the previous is down, without a new DNS look-up. Read here chapter 3.1 and here. When multiple data centers are involved then, DNS RR is the only option to distribute traffic across them. So, is it true that, with multiple data centers and HTTP traffic, the use of DNS RR is the ONLY way to assure instant fail-over when one data center goes down? Thanks, Valentino Edit: Off course each data center has a local Load Balancer with hot spare. It's OK to sacrifice session affinity for an instant fail-over. AFAIK the only way for a DNS to suggest a data center instead of another is to reply with just the IP (or IPs) associated to that data center. If the data center becomes unreachable then all those IP are also unreachables. This means that, even if smart HTML browsers are able to instantly try another A record , all the attempts will fail until the local cache entry expires and a new DNS lookup is done, fetching the new working IPs (I assume DNS automatically suggests to a new data center when one fail). So, "smart DNS" cannot assure instant fail-over. Conversely a DNS round-robin permits it. When one data center fail, the smart HTML browsers (most of them) instantly try the other cached A records jumping to another (working) data center. So, DNS round-robin doesn't assure session affinity or the lowest RTT but seems to be the only way to assure instant fail-over when the clients are "smart" HTML browsers. Edit 2: Some people suggest TCP Anycast as a definitive solution. In this paper (chapter 6) is explained that Anycast fail-over is related to BGP convergence. For this reason Anycast can employ from 15 minutes to 20 seconds to complete. 20 seconds are possible on networks where the topology was optimized for this. Probably just CDN operators can grant such fast fail-overs. Edit 3:* I did some DNS look-ups and traceroutes (maybe some expert can double check) and: The only CDN using TCP Anycast seems to be CacheFly, other operators like CDN networks and BitGravity use CacheFly. Seems that their edges cannot be used as reverse proxies. Therefore, they cannot be used to grant instant failover. Akamai and LimeLight seems to use geo-aware DNS. But! They return multiple A records. From traceroutes seems that the returned IPs are on the same data center. So, I'm puzzled on how they can offer a 100% SLA when one data center goes down.

  Read the article

• CentOS 5.8 dig is not resolving ip-address

  - by travisbotello

  I'm running centos 5.8 on a local machine at home. Today I was trying to analyze the DNS-Lookup via dig. $ dig +trace -t A www.heise.de. This is giving me something like this as a response de. 172800 IN NS f.nic.de. de. 172800 IN NS z.nic.de. de. 172800 IN NS s.de.net. de. 172800 IN NS n.de.net. de. 172800 IN NS a.nic.de. de. 172800 IN NS l.de.net. ;; Received 344 bytes from 192.58.128.30#53(192.58.128.30) in 49 ms In contrast my dedicated CentOS machine is returning the following de. 172800 IN NS a.nic.de. de. 172800 IN NS n.de.net. de. 172800 IN NS f.nic.de. de. 172800 IN NS z.nic.de. de. 172800 IN NS l.de.net. de. 172800 IN NS s.de.net. ;; Received 344 bytes from 192.58.128.30#53(j.root-servers.net) in 32 ms As you can see, the last line is different. Any idea why my dedicated machine is giving me the host name of the responding DNS-Server and my local machine is only returning the ip-address? Thanks in advance UPDATE The reverse DNS-Lookup is working without any problems. Also, I just checked this on my local mac and...exactly the same problem occurs. Is it possible that this has to do with the local router/modem/ISP?

  Read the article

• Raid 1 array won't assemble after power outage. How do I fix this ext4 mirror?

  - by Forkrul Assail

  Two ext4 drives on Raid 1 with mdadm won't reassemble after the power went out for an extended period (UPS drained). After turning the machine back on, mdadm said that the array was degraded, after which it took about 2 days for a full resync, which completed without problems. On trying to remount the array I get: mount: you must specify the filesystem type cat /etc/fstab lines relevant to setup: /dev/md127 /media/mediapool ext4 defaults 0 0 dmesg | tail (on trying to mount) says: [ 1050.818782] EXT3-fs (md127): error: can't find ext3 filesystem on dev md127. [ 1050.849214] EXT4-fs (md127): VFS: Can't find ext4 filesystem [ 1050.944781] FAT-fs (md127): invalid media value (0x00) [ 1050.944782] FAT-fs (md127): Can't find a valid FAT filesystem [ 1058.272787] EXT2-fs (md127): error: can't find an ext2 filesystem on dev md127. cat /proc/mdstat says: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md127 : active (auto-read-only) raid1 sdj[2] sdi[0] 2930135360 blocks super 1.2 [2/2] [UU] unused devices: <none> fsck /dev/md127 says: fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/md127 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> mdadm -E /dev/sdi gives me: /dev/sdi: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 3e6e9a4f:6c07ab3d:22d47fce:13cecfd0 Update Time : Tue Nov 13 20:34:18 2012 Checksum : f7d10db9 - correct Events : 27 Device Role : Active device 0 Array State : AA ('A' == active, '.' == missing) boot@boot ~ $ sudo mdadm -E /dev/sdj /dev/sdj: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 7fb84af4:e9295f7b:ede61f27:bec0cb57 Update Time : Tue Nov 13 20:34:18 2012 Checksum : b9d17fef - correct Events : 27 Device Role : Active device 1 Array State : AA ('A' == active, '.' == missing) machine@user ~ dmesg | tail [ 61.785866] init: alsa-restore main process (2736) terminated with status 99 [ 68.433548] eth0: no IPv6 routers present [ 534.142511] EXT4-fs (sdi): ext4_check_descriptors: Block bitmap for group 0 not in group (block 2838187772)! [ 534.142518] EXT4-fs (sdi): group descriptors corrupted! [ 546.418780] EXT2-fs (sdi): error: couldn't mount because of unsupported optional features (240) [ 549.654127] EXT3-fs (sdi): error: couldn't mount because of unsupported optional features (240) Since this is Raid 1 it was suggested that I try and mount or fsck the drives separately. After a long fsck on one drive, it ended with this as tail: Illegal double indirect block (2298566437) in inode 39717736. CLEARED. Illegal block #4231180 (2611866932) in inode 39717736. CLEARED. Error storing directory block information (inode=39717736, block=0, num=1092368): Memory allocation failed Recreate journal? yes Creating journal (32768 blocks): Done. *** journal has been re-created - filesystem is now ext3 again *** The drive however still doesn't want to mount: dmesg | tail [ 170.674659] md: export_rdev(sdc) [ 170.675152] md: export_rdev(sdc) [ 195.275288] md: export_rdev(sdc) [ 195.275876] md: export_rdev(sdc) [ 1338.540092] CE: hpet increased min_delta_ns to 30169 nsec [26125.734105] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [26125.734115] EXT4-fs (sdc): group descriptors corrupted! [26182.325371] EXT3-fs (sdc): error: couldn't mount because of unsupported optional features (240) [27083.316519] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [27083.316530] EXT4-fs (sdc): group descriptors corrupted! Please help me fix this. I never in my wildest nightmares thought a complete mirror would die this badly. Am I missing something? Suggestions on fixing this? Could someone explain why it would resync after the powerout, only to seemingly nuke the drive? Thanks for reading. Any help much appreciated. I've tried everything I can think of, including booting and filesystem checking with SystemRescue and Ubuntu liveboot discs.

  Read the article

• Custom built machine has much higher power consumption than expected

  - by foraidt

  I built a machine according to the specs of a computer magazine (c't, Germany). According to the magazine, the power consumption should be at around 10W. I don't want to go into the specifics of the hardware but rather ask for general advice on where to look: I updated the BIOS/UEFI version to the latest version, installed all the recommended drivers and unplugged all hardware that's not necessary to boot into Windows. All that was left is the power supply, mainboard, cpu, cpu cooler and one SSD drive. But still I measured a power consumption of 50W, which is 40W more than it should be. I tried booting Linux Mint from a USB stick, so I don't think it's some Windows-related problem.. Where else could I look? Update 1 I dind't want the question to get closed for being too localized but if more details are necessary, here they are: The system is a desktop PC. The power consumption is measured using a Brennenstuhl PM 231 device, which was tested also by c't and they found it quite accurate. The PSU is an Enermax ETL300AWT, the mainboard Intel DH87RL (Socket 1150) and the CPU Intel G3220 (Haswell). Update 2 There is no online version of the article*. The most details I found can be read on its project page (in German, though...) (*)You can pay for downloadable PDFs, however. English translation of that project page Update 3 Regarding the sceptics: It may sound ridiculous but apparently 10W idle consumption is possible with Intel's Haswell architecture. As a kind of proof, there's an additional Blog article explicitly listing the steps needed to reduce the idle consumption to 10W. Additional hardware: I measured the consumption without the HDD, and as expected the usage dropped by around 10W. I have no chassis fans and the CPU fan is a "Scythe Mugen 4" model. It runs at around 600rpm so I think it won't draw much. When stripping off all my extra components I should be at 10W. But I'm not getting anywhere near that. I would be happy to see "just" 15W in the stripped down version but currently I'm not getting below 50W no matter which component I remove. As I see it this cannot be explained by the PSU being less efficient at lower consumption. I also waited half an hour or so (also checked that no Windows updates were running in the background) and the consumption dind't drop by more than a few watts.

  Read the article

• How to automate org-refile for multiple todo

  - by lawlist

  I'm looking to automate org-refile so that it will find all of the matches and re-file them to a specific location (but not archive). I found a fully automated method of archiving multiple todo, and I am hopeful to find or create (with some help) something similar to this awesome function (but for a different heading / location other than archiving): https://github.com/tonyday567/jwiegley-dot-emacs/blob/master/dot-org.el (defun org-archive-done-tasks () (interactive) (save-excursion (goto-char (point-min)) (while (re-search-forward "\* \\(None\\|Someday\\) " nil t) (if (save-restriction (save-excursion (org-narrow-to-subtree) (search-forward ":LOGBOOK:" nil t))) (forward-line) (org-archive-subtree) (goto-char (line-beginning-position)))))) I also found this (written by aculich), which is a step in the right direction, but still requires repeating the function manually: http://stackoverflow.com/questions/7509463/how-to-move-a-subtree-to-another-subtree-in-org-mode-emacs ;; I also wanted a way for org-refile to refile easily to a subtree, so I wrote some code and generalized it so that it will set an arbitrary immediate target anywhere (not just in the same file). ;; Basic usage is to move somewhere in Tree B and type C-c C-x C-m to mark the target for refiling, then move to the entry in Tree A that you want to refile and type C-c C-w which will immediately refile into the target location you set in Tree B without prompting you, unless you called org-refile-immediate-target with a prefix arg C-u C-c C-x C-m. ;; Note that if you press C-c C-w in rapid succession to refile multiple entries it will preserve the order of your entries even if org-reverse-note-order is set to t, but you can turn it off to respect the setting of org-reverse-note-order with a double prefix arg C-u C-u C-c C-x C-m. (defvar org-refile-immediate nil "Refile immediately using `org-refile-immediate-target' instead of prompting.") (make-local-variable 'org-refile-immediate) (defvar org-refile-immediate-preserve-order t "If last command was also `org-refile' then preserve ordering.") (make-local-variable 'org-refile-immediate-preserve-order) (defvar org-refile-immediate-target nil) "Value uses the same format as an item in `org-refile-targets'." (make-local-variable 'org-refile-immediate-target) (defadvice org-refile (around org-immediate activate) (if (not org-refile-immediate) ad-do-it ;; if last command was `org-refile' then preserve ordering (let ((org-reverse-note-order (if (and org-refile-immediate-preserve-order (eq last-command 'org-refile)) nil org-reverse-note-order))) (ad-set-arg 2 (assoc org-refile-immediate-target (org-refile-get-targets))) (prog1 ad-do-it (setq this-command 'org-refile))))) (defadvice org-refile-cache-clear (after org-refile-history-clear activate) (setq org-refile-targets (default-value 'org-refile-targets)) (setq org-refile-immediate nil) (setq org-refile-immediate-target nil) (setq org-refile-history nil)) ;;;###autoload (defun org-refile-immediate-target (&optional arg) "Set current entry as `org-refile' target. Non-nil turns off `org-refile-immediate', otherwise `org-refile' will immediately refile without prompting for target using most recent entry in `org-refile-targets' that matches `org-refile-immediate-target' as the default." (interactive "P") (if (equal arg '(16)) (progn (setq org-refile-immediate-preserve-order (not org-refile-immediate-preserve-order)) (message "Order preserving is turned: %s" (if org-refile-immediate-preserve-order "on" "off"))) (setq org-refile-immediate (unless arg t)) (make-local-variable 'org-refile-targets) (let* ((components (org-heading-components)) (level (first components)) (heading (nth 4 components)) (string (substring-no-properties heading))) (add-to-list 'org-refile-targets (append (list (buffer-file-name)) (cons :regexp (format "^%s %s$" (make-string level ?*) string)))) (setq org-refile-immediate-target heading)))) (define-key org-mode-map "\C-c\C-x\C-m" 'org-refile-immediate-target) It sure would be helpful if aculich, or some other maven, could please create a variable similar to (setq org-archive-location "~/0.todo.org::* Archived Tasks") so users can specify the file and heading, which is already a part of the org-archive-subtree functionality. I'm doing a search and mark because I don't have the wherewithal to create something like org-archive-location for this setup. EDIT: One step closer -- almost home free . . . (defun lawlist-auto-refile () (interactive) (beginning-of-buffer) (re-search-forward "\* UNDATED") (org-refile-immediate-target) ;; cursor must be on a heading to work. (save-excursion (re-search-backward "\* UNDATED") ;; must be written in such a way so that sub-entries of * UNDATED are not searched; or else infinity loop. (while (re-search-backward "\* \\(None\\|Someday\\) " nil t) (org-refile) ) ) )

  Read the article

• mint linux, DVD drive keeps randomly being accessed. unsure how to find culprit

  - by juicebox

  I have a workstation with mint linux 12. It seems like the DVD drive on the machine keeps randomly "activating". By activating it makes noise, the light turns on, and it seems like it is checking if a disk is in it. At first I thought I was being hacked and someone/something was trying to check if I had media in the DVDRom drive. I ruled that out with netstat and rkhunter. I checked my logs and the only thing I can find that might help point out the problem are these repeated chunks in syslog: Mar 24 17:47:31 rich-MINT kernel: [ 9846.551422] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in Mar 24 17:47:31 rich-MINT kernel: [ 9846.551424] res 51/40:01:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) Mar 24 17:47:31 rich-MINT kernel: [ 9846.551427] ata2.00: status: { DRDY ERR } Mar 24 17:47:31 rich-MINT kernel: [ 9846.551433] ata2.00: hard resetting link Mar 24 17:47:32 rich-MINT kernel: [ 9846.868012] ata2.01: hard resetting link Mar 24 17:47:32 rich-MINT kernel: [ 9847.344054] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Mar 24 17:47:32 rich-MINT kernel: [ 9847.344067] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 24 17:47:32 rich-MINT kernel: [ 9847.376118] ata2.00: configured for PIO0 Mar 24 17:47:32 rich-MINT kernel: [ 9847.393047] ata2.01: configured for UDMA/133 Mar 24 17:47:32 rich-MINT kernel: [ 9847.397046] ata2: EH complete and again Mar 24 17:55:28 rich-MINT kernel: [10323.633268] sr 1:0:0:0: ioctl_internal_command return code = 8000002 Mar 24 17:55:28 rich-MINT kernel: [10323.633270] : Sense Key : Aborted Command [current] [descriptor] Mar 24 17:55:28 rich-MINT kernel: [10323.633275] : Add. Sense: No additional sense information Mar 24 17:55:11 rich-MINT kernel: [10306.640009] ata2.00: link is slow to respond, please be patient (ready=0) Mar 24 17:55:16 rich-MINT kernel: [10310.840009] ata2.00: SRST failed (errno=-16) Mar 24 17:55:16 rich-MINT kernel: [10310.840016] ata2.00: hard resetting link Mar 24 17:55:16 rich-MINT kernel: [10311.160013] ata2.01: hard resetting link Mar 24 17:55:16 rich-MINT kernel: [10311.636061] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Mar 24 17:55:16 rich-MINT kernel: [10311.636075] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 24 17:55:16 rich-MINT kernel: [10311.668122] ata2.00: configured for PIO0 Mar 24 17:55:16 rich-MINT kernel: [10311.684854] ata2.01: configured for UDMA/133 Mar 24 17:55:17 rich-MINT kernel: [10312.105473] ata2: EH complete (Copied from Pastebin - http://pastebin.com/YNDrnyzH) If any linux masters could take a quick look at these log outputs and help me understand what is going on , much appreciated.

  Read the article

• APC File Cache not working but user cache is fine

  - by danishgoel

  I have just got a VPS (with cPanel/WHM) to test what gains i could get in my application with using apc file cache AND user cache. So firstly I got the PHP 5.3 compiled in as a DSO (apache module). Then installed APC via PECL through SSH. (First I tried with WHM Module installer, it also had the same problem, so I tried it via ssh) All seemed fine and phpinfo showed apc loaded and enabled. Then I checked with apc.php. All seemed OK But as I started testing my php application, the stats in apc for File Cache Information state: Cached Files 0 ( 0.0 Bytes) Hits 1 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Which meant no PHP files were being cached, even though I had browsed through over 10 PHP files having multiple includes. So there must have been some Cached Files. But the user cache is functioning fine. User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 1000 Misses 1000 Request Rate (hits, misses) 0.84 cache requests/second Hit Rate 0.42 cache requests/second Miss Rate 0.42 cache requests/second Insert Rate 0.84 cache requests/second Cache full count 0 Its actually from an APC caching test script which tries to retrieve and store 1000 entries and gives me the times. A sort of simple benchmark. Can anyone help me here. Even though apc.cache_by_default = 1, no php files are being cached. This is my apc config Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 32M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1 Also most php files are under 20KB, thus, apc.max_file_size = 1M is not the cause. I have also tried using 'apc_compile_file ' to force some files into opcode cache with no luck. I have also re-installed APC with Debugging enabled, but nothing shows in the error_log I have also tried setting mmap_file_mask to /dev/zero and /tmp/apc.xxxxxx, i have also set /tmp permissions to 777 to no avail Any clue anyone. Update: I have tried following things and none cause APC file cache to populate 1. set apc.enable_cli = 1 AND run a script from cli 2. Set apc.max_file_size = 5M (just in case) 3. switched php handler from dso to FastCGI in WHM (then switched it back to dso as it did not solve the problem) 4. Even tried restarting the container

  Read the article

• SQL 2008 R2 Named Instance Client Connectivity Issues?

  - by Jerry Dodge

  We're upgrading our software from using SQL 2000 to 2008 R2. Our customers will be installing an update which uninstalls 2000 and installs 2008 R2 under the same instance. So if no instance existed, then no instance name will be set (default). However, the problem starts with the customers which have a named SQL instance. Starting in 2008 R2 (not sure of ones before), for some reason, a client connecting to the server by its instance name is unsuccessful. I'm testing from the Management Studio - if I can't connect this, then nothing can connect. I browse network servers, and find the specific server\instance in the list. But, upon trying to connect to an instance name like MyServer\INST, I get: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) I do in fact have TCP/IP and Named Pipes protocols enabled, this is the first thing I did. When I connect to the server using a comma (,) and port number like MyServer, 49195, it works just fine. So it appears that client computers are just unable to identify the instance names. This has happened on all our installations of SQL 2008 R2 and from all client computers, including Win 7, XP, Vista, Server 2008, and Server 2003. We never experienced such issues on earlier versions of SQL. The problem even persists if the firewalls and antiviruses are all disabled. Now, this is a large update which we will be distributing soon to all our customers, and we want to minimize the interaction they need with us to get this installed. We absolutely hate the idea of using a port number, because it will always be different, and we would have to modify each client to point to this server/port. Some of our customers may have hundreds of client computers. How do I make client connections to a named SQL instance work again? After all, this is the whole purpose of named instances, and if a client can't connect to this instance by its name, then what is it even named for? EDIT It was mentioned to make sure SQL Browser is running, so I checked, and it is running. The server is also able to connect to its self (locally) - just external connections are refused. UPDATE After more careful checking, I learned the firewall wasn't completely disabled when testing, and upon disabling it completely, this works. So it appears that SQL Browser is being blocked by the firewall from external clients from accessing.

  Read the article

• IE8 Refuses to run Javascript from Local Hard Drive

  - by Josh Stodola

  I have a problem that just started at work recently and the network manager is certain he did not change anything with the group policy. Anyways, here is a detailed description of the problem. My machine is Windows XP SP3, and I use IE8 to browse. We have McAffee anti-virus software that I am unable to configure. I use the following file to test... <!DOCTYPE html> <html> <head> <title>Javascript Test</title> </head> <body> <script type="text/javascript"> document.write("<h1>PASS</h1>"); </script> <noscript> <h1>FAIL</h1> </noscript> </body> </html> When I open this file from the C: drive, it fails every time. If I execute it anywhere else (local/remote web server or on a mapped network drive), it works just fine. When I am simply browsing the Internet, Javascript on web sites works just fine. It is only failing on files running from my C: drive. Additionally, I have had a couple other programmers in the department try this file on their C: drive, and it works fine for them. So I don't believe it is a group policy thing. I need to fix this because I do extensive testing from my C: drive, and I am accustomed to doing so. I don't want to get into the habit of moving files to a different drive just to test. Things I have tried: Enabled "Allow Active Content to Run Files on My Computer" in Options | Advanced | Security Enabled "Allow Active Scripting" in Options | Security | Custom Level Verified that "Script" was not checked as disabled in Developer Toolbar Added localhost to Trusted Sites in Options Disabled McAffee completely (momentarily, with help from network admin) Used an older DOCTYPE in my test HTML page Re-installed IE8 completely Ran regsvr32 on the JScript.dll Slammed keyboard I am sure that there is a setting somewhere that will fix this problem, possibly in the registry. I would not be surprised if it was related to the developer toolbar. At this point I do not know where else to look. Can anyone help me resolve this problem? EDIT: Regardless of the bounty, this issue is still ongoing.

  Read the article

• VPN pptp connection Unable to pass through linux iptables

  - by user221844

  I have set up a windows VPN server behind Linux - Ubuntu box that is working as firewall and proxy server. Now I want people from outside to be able to connect to the VPN server, but the connection is not being established and I get on the client an error 619. I have checked the problem on the internet and it seems a firewall issue. what should I do to make the connection established through the firewall? here is below the information about my setup Firewall-External-IF-IP: 172.16.1.100 Firewall-LAN-IF-IP: 192.168.1.1 VPN-Server-IP: 192.168.1.10 and below is my iptables file content: #Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *filter :INPUT ACCEPT [162000:140437619] :FORWARD ACCEPT [23282:27196133] :OUTPUT ACCEPT [185778:143961739] :LOGGING - [0:0] -A INPUT -p gre -j ACCEPT -A INPUT -s 192.168.1.10/32 -p tcp -m tcp --sport 1723 -j ACCEPT -A INPUT -s 192.168.1.10/32 -p udp -m udp --sport 1723 -j ACCEPT -A FORWARD -s 192.168.1.0/24 -o EXT_IF -j ACCEPT -A FORWARD -s 192.168.1.0/24 -i EXT_IF -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 192.168.1.10/32 -i EXT_IF -o INT_IF -p tcp -m tcp --dport 1723 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 192.168.1.10/32 -i INT_IF -o EXT_IF -p tcp -m tcp --sport 1723 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 192.168.1.10/32 -i EXT_IF -o INT_IF -p gre -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 192.168.1.10/32 -i INT_IF -o EXT_IF -p gre -m state --state RELATED,ESTABLISHED -j ACCEPT -A OUTPUT -p gre -j ACCEPT -A OUTPUT -d 192.168.1.10/32 -p tcp -m tcp --dport 1723 -j ACCEPT -A OUTPUT -d 192.168.1.10/32 -p udp -m udp --dport 1723 -j ACCEPT COMMIT # Completed on Thu May 29 12:40:18 2014 # Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *nat :PREROUTING ACCEPT [17865:1053739] :INPUT ACCEPT [5490:357281] :OUTPUT ACCEPT [3723:223677] :POSTROUTING ACCEPT [3726:223870] -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p tcp -m tcp --dport 1723 -j DNAT --to-destination 192.168.1.10 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p gre -j DNAT --to-destination 192.168.1.10 -A PREROUTING -i -h -A POSTROUTING -s 192.168.1.0/24 -o EXT_IF -j MASQUERADE COMMIT # Completed on Thu May 29 12:40:18 2014 # Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *mangle :PREROUTING ACCEPT [22695965:17811993005] :INPUT ACCEPT [13818180:11522330171] :PREROUTING ACCEPT [17865:1053739] :INPUT ACCEPT [5490:357281] :OUTPUT ACCEPT [3723:223677] :POSTROUTING ACCEPT [3726:223870] -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p tcp -m tcp --dport 1723 -j DNAT --to-destination 192.168.1.10 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p gre -j DNAT --to-destination 192.168.1.10 -A PREROUTING -i -h -A POSTROUTING -s 192.168.1.0/24 -o EXT_IF -j MASQUERADE COMMIT # Completed on Thu May 29 12:40:18 2014 # Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *mangle :PREROUTING ACCEPT [22695965:17811993005] :INPUT ACCEPT [13818180:11522330171] :FORWARD ACCEPT [8527694:6271564562] :OUTPUT ACCEPT [14748508:11899678536] :POSTROUTING ACCEPT [23271280:18170828012] COMMIT # Completed on Thu May 29 12:40:18 2014 hope that I find the solution here ....!! :(

  Read the article

• Empty $_POST data

  - by Antimony

  I am trying to post a post to my MyBB server from a Python script, but try as I might, I can't get it to work. The request shows up in the forensic log and the headers are in the $_SERVER variable, but $_POST is always an empty array. The error log shows nothing, even at the debug level. I've already tried searching, but I haven't found anything that's helped. I already checked the post_max_size thing, which is 8M. Another factor is that it's just my own requests which aren't going through. Browser generated requests seem to do just fine. I've looked and looked, but I can't find anything I'm doing differently that should matter. Anyway, here is an example request. POST /newreply.php?tid=1&processed=1 HTTP/1.1 Host: <redacted> Accept-Encoding: identity Content-Length: 1153 Content-Type: multipart/form-data; boundary=-->0xa216654L Cookie: sid=<redacted>; mybb[lastvisit]=1354995469; mybb[lastactive]=1354995500; mybb[threadread]=a%3A1%3A%7Bi%3A1%3Bi%3A1354995469%3B%7D; mybb[forumread]=a%3A1%3A%7Bi%3A2%3Bi%3A1354995469%3B%7D; loginattempts=1; mybbuser=2_ZlVVfaYS9FstZGQzr4KiNRUm3Z4xAgJkTPPq2ouFcuaragOTVQ Accept: text/html User-Agent: Mozilla/5.0 (Windows NT 6.1; rv:14.0) Gecko/20100101 Firefox/14.0.1 -->0xa216654L Content-Disposition: form-data; name="my_post_key" 257b2bbef4334000d9088169154900a3 -->0xa216654L Content-Disposition: form-data; name="quoted_ids" -->0xa216654L Content-Disposition: form-data; name="tid" 1 -->0xa216654L Content-Disposition: form-data; name="message" foo!2 -->0xa216654L Content-Disposition: form-data; name="attachmentact" -->0xa216654L Content-Disposition: form-data; name="attachmentaid" -->0xa216654L Content-Disposition: form-data; name="icon" -1 -->0xa216654L Content-Disposition: form-data; name="posthash" e93a2c78ce3f6807a86fd475ef4178cf -->0xa216654L Content-Disposition: form-data; name="postoptions[subscriptionmethod]" -->0xa216654L Content-Disposition: form-data; name="replyto" -->0xa216654L Content-Disposition: form-data; name="message_new" foo!2 -->0xa216654L Content-Disposition: form-data; name="submit" Post Reply -->0xa216654L Content-Disposition: form-data; name="attachment"; filename="" Content-Type: application/octet-stream -->0xa216654L Content-Disposition: form-data; name="action" do_newreply -->0xa216654L Content-Disposition: form-data; name="subject" Lol -->0xa216654L

  Read the article

• nginx probably deliering wrong filetype for .css file with php tags

  - by Katai

  And again - NGINX is giving me many Questions today :) Like always, I already tried around for a while, but cant seem to fix this issue: I just configured NGINX to handle my .css files equal to my .php files (to parse PHP tags inside the CSS file). This works perfectly, and the file is found and delivered. I could debug it with FIrebug, and everything is OK (it displays the contents of the .css inside the opened <link> tag). So, everything working, right? Wrong. It has the CSS, but it does not interpret it! What I mean by this: apparently, the file-type of the CSS (or aplication-type, whatever) is wrong. The Page can access the CSS, but doesnt bother at all to actually use it. What I checked / tried: There are no PHP errors inside of the .css, so that one is out The .css is accessible. I can call the URI manually, or check if the included URL finds it: both works The .css has no syntax errors (i switched to a css that just has body {background-color: #000; } It works whitout NGINX I deleted the browser cache / restarted NGINX after config rewrites Here the configuration: server { listen 80; server_name localhost; access_log /var/log/nginx/board.access_log; error_log /var/log/nginx/board.error_log warn; root /var/www/board/public; index index.php; fastcgi_index index.php; location / { try_files $uri $uri /index.php; } location ~ (\.php|\.css)$ { try_files $uri =404; include /etc/nginx/fastcgi_params; #keepalive_timeout 0; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_pass 127.0.0.1:7777; } } Firebug 'Network' Response Header: Connection keep-alive Content-Encoding gzip Content-Type text/html Date Sat, 16 Jun 2012 10:08:40 GMT Server nginx/1.0.5 Transfer-Encoding chunked X-Powered-By PHP/5.3.6-13ubuntu3.7 I think I just answered my own question. Is the Content-Type text/html the problem? How can I remove that? My personal guess is that I have to use this in some way include /etc/nginx/mime.types; default_type application/octet-stream; But I'm not sure... anyone an idea how to solve this? TLDR; CSS file is delivered correctly, but it doesnt seem to be 'used' as CSS from the browser. (Tested, works on apache)

  Read the article

< Previous Page | 482 483 484 485 486 487 488 489 490 491 492 493  | Next Page >