Search Results

Search found 15099 results on 604 pages for 'stop loading'.

Page 486/604 | < Previous Page | 482 483 484 485 486 487 488 489 490 491 492 493  | Next Page >

• BIOS corrupted? How to proceed? Acer Travelmate 290

  - by dtlussier

  I have a older ACER Travelmate 290 (manufactured in 2002 or 2003), which I recently tried to upgrade to Ubuntu 9.10. After doing the upgrade process it appeared as if I had a problem with my x server configuration, as on the first reboot post-install I heard the Ubuntu startup sound, but had a black screen. I thought I would then reboot again to drop down into text-mode to trouble shoot the x configuration problem. However, when I tried rebooting, something went wrong and since then when I start up the machine I get absolutely nothing except the first hardware check (i.e. HDD light flashes, CD/DVD drive spins, etc.). Other than that the screen remains totally black and I have no HDD or processor activity at all. I have tried restarting it a number of time holding down all kinds of key combinations to try and coax it into the BIOS (if possible) with no luck. I have also tried putting in both a live Linux disc and a Windows install disk without any luck. With a disk in the drive it will spin for a few seconds and then stop. All this has lead me to suspect that the BIOS is somehow corrupt (not sure about the right terminology). I have tried putting a new BIOS image and installer program downloaded from ACER on a USB key to see if it will run when I start up the machine, but no luck. I'm not sure if this method of interacting/updating/flashing the BIOS will work outside of Windows/DOS as both OSs are mentioned kind of ambiguously in the documentation. I have also taken the laptop case apart and inspected the various cards and cannot find any obviously burned out components. I'm not sure how to proceed at this point in terms of components to try, or how to try and load a new BIOS image onto the board. Any advice here would be great, especially from those with experience with this particular line of laptops. Thanks!

  Read the article

• Debian/OVH: How to configure multiple Failover IP on the same Xen (Debian) Virtual Machine?

  - by D.S.

  I have a problem on a Xen virtual machine (running latest Debian), when I try to configure a second failover IP address. OVH reports that my IP is misconfigured and they complaint they receive a massive quantity of ARP packets from this IPs, so they are going to block my IP unless I fix this issue. I suspect there's a routing issue, but I don't know (and can't find any useful info on the provider's website, and their support doesn't provide me a valid solution, just bounce me to their online - useless - guides). My /etc/network/interfaces look like this: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address AAA.AAA.AAA.AAA netmask 255.255.255.255 broadcast AAA.AAA.AAA.AAA post-up route add 000.000.000.254 dev eth0 post-up route add default default gw 000.000.000.254 dev eth0 # Secondary NIC auto eth0:0 iface eth0:0 inet static address BBB.BBB.BBB.BBB netmask 255.255.255.255 broadcast BBB.BBB.BBB.BBB And the routing table is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 000.000.000.254 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 0.0.0.0 000.000.000.254 0.0.0.0 UG 0 0 0 eth0 In these examples (true IP addresses are replaced by fake ones, guess why :)), 000.000.000.000 is my main server's IP address (dom0), 000.000.000.254 is the default gateway OVH recommends, AAA.AAA.AAA.AAA is the first IP Failover and BBB.BBB.BBB.BBB is the second one. I need both AAA.AAA.AAA.AAA and BBB.BBB.BBB.BBB to be publicly reachable from Internet and point to my domU, and to be able to access Internet from inside the virtual machine (domU). I am using eth0 and eth0:0 because due to OVH support, I have to assign both IPs to the same MAC address and then create a virtual eth0:0 interface for the second IP. Any suggestion? What am I doing wrong? How can I stop OVH complaining about ARP flood? Many thanks in advance, DS

  Read the article

• Why can't I route to some sites from my MacBook Pro that I can see from my iPad?

  - by Robert Atkins

  I am on M1 Cable (residential) broadband in Singapore. I have an intermittent problem routing to some sites from my MacBook Pro—often Google-related sites (arduino.googlecode.com and ajax.googleapis.com right now, but sometimes even gmail.com.) This prevents StackExchange chat from working, for instance. Funny thing is, my iPad can route to those sites and they're on the same wireless network! I can ping the sites, but not traceroute to them which I find odd. That I can get through via the iPad implies the problem is with the MBP. In any case, calling M1 support is... not helpful. I get the same behaviour when I bypass the Airport Express entirely and plug the MBP directly into the cable modem. Can anybody explain a) how this is even possible and b) how to fix it? mella:~ ratkins$ ping ajax.googleapis.com PING googleapis.l.google.com (209.85.132.95): 56 data bytes 64 bytes from 209.85.132.95: icmp_seq=0 ttl=50 time=11.488 ms 64 bytes from 209.85.132.95: icmp_seq=1 ttl=53 time=13.012 ms 64 bytes from 209.85.132.95: icmp_seq=2 ttl=53 time=13.048 ms ^C --- googleapis.l.google.com ping statistics --- 3 packets transmitted, 3 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 11.488/12.516/13.048/0.727 ms mella:~ ratkins$ traceroute ajax.googleapis.com traceroute to googleapis.l.google.com (209.85.132.95), 64 hops max, 52 byte packets traceroute: sendto: No route to host 1 traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 *traceroute: sendto: No route to host traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 ^C mella:~ ratkins$ The traceroute from the iPad goes (and I'm copying this by hand): 10.0.1.1 119.56.34.1 172.20.8.222 172.31.253.11 202.65.245.1 202.65.245.142 209.85.243.156 72.14.233.145 209.85.132.82 From the MBP, I can't traceroute to any of the IPs from 172.20.8.222 onwards. [For extra flavour, not being able to access the above appears to stop me logging in to Server Fault via OpenID and formatting the above traceroutes correctly. Anyone with sufficient rep here to do so, I'd be much obliged.]

  Read the article

• Mysql server won't start - no logs

  - by Owen

  After a restart, mysql won't start. sudo service mysql start gives start: Job failed to start and the logs are empty, so I have no idea where to start. I'm pretty sure permissions problems are taken care of. Edit: All disks have at least 1G of space and sh -x /etc/init.d/mysql start gives me: + set -e + basename /etc/init.d/mysql + INITSCRIPT=mysql + JOB=mysql + [ mysql = upstart-job ] + [ -z start ] + COMMAND=start + shift + [ -z ] + ECHO=echo + echo Rather than invoking init scripts through /etc/init.d, use the service(8) Rather than invoking init scripts through /etc/init.d, use the service(8) + echo utility, e.g. service mysql start utility, e.g. service mysql start + echo + echo Since the script you are attempting to invoke has been converted to an Since the script you are attempting to invoke has been converted to an + echo Upstart job, you may also use the start(8) utility, e.g. start mysql Upstart job, you may also use the start(8) utility, e.g. start mysql + grep -q start/ + status mysql + [ -z ] + [ start = stop ] + [ -n ] + start mysql start: Rejected send message, 1 matched rules; type="method_call", sender=":1.105" (uid=1000 pid=3208 comm="start mysql ") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply="0" destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")

  Read the article

• Symantec Endpoint Protection Virus Definitions

  - by Gus Denton

  I have done some Googling but I cannot get a definitive answer certainly not from the Symantec KB. I have a Virtualised Win 2003R2 server 32bit. It has been provisioned to me with Symantec Endpoint Protection 11.0.62xxx CLIENT (not a definitions server) the directory C:\Program Files\Common Files\Symantec Shared\VirusDefs is 750MB IT doesn't contain .tmp directories so it is NOT a corrupt definitions server. IT does contain directories named with a date pattern YYYYMMDD.xxx Some of these folders are 12 months old and I would like to recover the space. The sysmantect forums are full of this stuff but a lot of the postings contain links back to documents that are not specific to End Point Protection Client. It appears that I should be able to delete the older folders and all will be OK. with a service restart however there is a warning about having Live Update Administrator Installed Firstly I have no idea if I have this installed how to I check and secondly can I just ditch these old files and restart ? Regards Gus Denton Learning and Teaching Uni of New South Wales Sydney Australia For those trying to assist me I thankyou. I have followed some instructions found on the Symantec site and assumed that the response from Nixphoe would resolve my issue. It appears that as I am on a provisioned VM from a central IT unit I cannot run the Symantec commands from the Run prompt as my admin creds to get me in. (smc -stop) Basically I need to claw back some Diskspace from the c: drive which is being filed up with WSUS patches and Symantec files. I have managed to delete one symantec cache through the live update control panel and recovered 470Mb I suppose my last question for those more experienced than myself is, can I simply remove say the two oldest virus definition folders without completely foobaring the End Point protection and the server ? Regards Gus

  Read the article

• MsMpEng.exe (Windows Defender?) uses a lot of CPU at startup and runs two instances on a single core

  - by dlamblin

  I'm using Windows XP Professional SP2 on a single core AMD64 processor, and I've got two instances of MsMpEng.exe starting up when I start up and log in. They use 64MB and 32MB of ram and 140MB and 80MB of virtual memory, and fluctuate around 80% CPU usage for about 5 minutes at start up. They are (I read) associated with Windows Defender, but I'm concerned about: There's two of them, everything I read generally has only one reported. They might be scanning each other, and I want that to stop. They might be getting scanned by avgrsx.exe (AVG Free 8) (uses about 16Mb v ram) They might also be scanning moe.exe (assosciated with ms live mesh, which I'm considering getting rid of) Lastly I have Microsoft Security Essentials. I don't know the process name associated there. The main concern of mine (apart from the double instances) is that these are all trying to prioritize scanning each other at once except maybe moe.exe. This might seem legitimate but is likely a useless drain on resources. Have I made a mistake in having all of these installed, or is there a way to inform them not to do whatever they're doing that's taking about 5+ minutes at start up? [I also have Google Desktop, but I'm keeping that.] Comment if none of this makes sense to you.

  Read the article

• Ventrilo sound delay issue in Windows 7

  - by TM

  I've upgraded my machine to Windows 7 Professional (x64) (using format + clean install, not upgrade install). Everything seems to work fine except for Ventrilo. I used to have Vista Business x64 and Ventrilo worked fine there, on the same machine. The issue I am having is that when I am playing a game and using Ventrilo, everything works fine at first, but after a few minutes, I stop hearing anything that people say. If I minimize, I can see the speaker icons lighting up (meaning that people are talking), but I still can't hear anything. The sounds from the game and other OS sounds still play through the speakers just fine. Eventually, I will close ventrilo and then after a few seconds I will start hearing things that people were saying several minutes ago. I start hearing everything that was said, with no "silent time" in between. Note that the sounds keep playing even AFTER the ventrilo process is dead. I've tried using Ventrilo x64 and x86 versions. Does anyone have any advice on how to fix this problem?

  Read the article

• Can gnome windows (in Ubuntu) be individually themed?

  - by Peter.O

  (Yes, "individually themed" is an oxymoron, but I still want it.) I've just moved from Windows to Ubuntu Linux, and although I am enjoying this new adventure playground, I've encountered something quite unexpected... and its bugging me. It is probably because there are so many gnome apps in Ubuntu (... how strange :) This is great. and the range of available apps is excellent! ...but because of this one-stop-shop scenario, most of the windows look remarkably similar. I'm certainly not after bling-maximus, but I would like a few differentiating colours for my not-so-young eyes to help identify an app at a glance (especially in the compiz lists) ... I love compiz :) I thought it was just a bit of razzle-dazzle, and that alone would be enough, but it is actually very practical to boot. So, basically, I'm wondering if there is a way to theme individual window components on a per app basis... especially the window decoration; menu bar, etc. Thanks.

  Read the article

• IE 8 crashes when opening an html file from an autorun CD

  - by dave4351

  On Windows 7, when I insert a CD with a very simple HTML page referenced in the autorun.inf file, Internet Explorer 8 opens and then immediately crashes, with the error message "Internet Explorer has stopped working" and then checks for a solution. Then it says "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." On Windows Vista, IE 8 just opens and then closes silently, with no error messages or help of any kind. I have since discovered this is due to IE 8's "protected mode" and turning this off fixes the issue so that the HTML file on the CD launches normally. What I'd like to know: is there any way to get around this, so that I can launch a simple HTML file in the user's default browser, using an autorun.inf file on a CD, without first having my users open IE 8 and turn off protected mode? Perhaps the most bizarre thing is that if IE is already open when you insert the CD, the HTML page just opens--no crash. It only crashes if IE 8 happens to be closed when you insert the CD. And so a possible workaround may be to get the default browser to launch and then open the HTML file. All suggestions welcome.

  Read the article

• Is dual-channel RAM operation independent for each bank?

  - by user553702

  For dual-channel usage of DDR3 SDRAM, what happens if one bank has DIMMs in both channels but the other bank has only one DIMM in one channel? Will the bank with the paired DIMMs operate at the dual-channel rate while the bank with the unpaired DIMM operates at the single-channel rate? Or does having a bank with an unpaired DIMM force all of the RAM to operate as single-channel? For example, if I initially have only one bank populated with paired 4GB sticks operating as dual-channel, what happens if I then add a single 8GB stick to the other channel leaving the last DIMM slot empty? Will this stop the 4GB sticks from being dual-channel? In addition, what happens if each bank has DIMMs of different clock speeds? Does each dual-channel bank operate at an independent speed, or does all of the RAM operate at the slowest DIMM's speed? For example, in the above scenario, what would happen if the 8GB stick I added is slower than the original 4GB sticks in the other bank? Will the (paired) 4GB sticks then operate at a slower speed than before?

  Read the article

• With Ubuntu 9.10, my DVD keeps spinning up

  - by Ken

  I have Ubuntu 9.10 on my Intel Mac Mini. When there's a DVD in the drive, and even if there's no program open at all (just looking at the desktop), every minute or so the disc spins up with a loud whirring noise, and I can hear it cranking the motor to seek across the disc. How do I find out what's causing this? And how can I make it stop? Thanks! EDIT: I straced nautilus, and saw nothing it's doing directly, even when the disc spins up. It does poll inotify regularly, but I don't know how to trace what it's watching, or if that's even how it receives disc-inserted notifications. It doesn't call inotify_add_watch when I insert a disc or mount it (or eject or umount), but it could be watching all of /dev already or something like that. Of course, a DVD is mounted read-only, so whether it's inotify or something else, it should never need to poll anything on that. And if it is inotify, it's happening in the kernel, and the kernel should really never need to poll a device it's mounted to check for notifications.

  Read the article

• Moving MySQL directory on an Amazon EC2 machine

  - by Traveling Tech Guy

  I'm trying to have MySQL point to a directory on an EBS volume I mounted on my EC2 machine. I took th following steps: Stopped MySQL (/etc/init.d/mysqld stop) - successful Created a MySQL directory on my volume, mounted on /vol (mkdir /vol/mysql) Copied the contents of /var/lib/mysql to /vol/mysql (cp -R /var/lib/mysql /vol/mysql) Chanded the owner and group of that directory to match the original (chown -R mysql:mysql /vol/mysql) - after this step, the 2 directories are identical. Edited the /etc/my.cnf file (commented 2 original lines): [mysqld] #datadir=/var/lib/mysql #socket=/var/lib/mysql/mysql.sock datadir=/vol/mysql socket=/vol/mysql/mysql.sock` Started MySQL (/etc/init.d/mysqld start) - FAILED The error file /var/log/mysqld.log contains the following lines: 100205 20:52:54 mysqld started 100205 20:52:54 InnoDB: Started; log sequence number 0 43665 100205 20:52:54 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.0.45' socket: '/vol/mysql/mysql.sock' port: 3306 Source distribution No other errors are available. What am I doing wrong? Where can I find the error/s encountered by MySql? If I restore the original lines, MySQL starts, leading me to believe it may be a permissions issue - but permissions are the same for both directories? Thanks!

  Read the article

• How to migrate a running KVM (with full disk copy) to another node?

  - by klipz

  I'm doing tests on KVM, and I'd like to see if I can make a hot migration, I mean the virtual machine won't stop running during the migration (but a few seconds of freeze is ok). I use a small cluster for my test : kvm1, kvm2, and kvmnfs. kvm1 and kvm2 runs the virtual machines kvmnfs is a NFS server, and it's mounted on /KVM on both kvm1 and kvm2 To migrate a VM (only RAM in fact) from kvm1 to kvm2, I run the same kvm command on kvm2 (with -incoming tcp:0:4444) that on kvm1, then I use "migrate -d tcp:kvm2:4444" : It works great, since the VM file is common to both machines. Now, I wan't to make a full migration (RAM + disk) of a local VM file (no more NFS) of kvm1 to kvm2. I tried to create an empty file, with touch, on kvm2 and use the same kvm command line + the "-incoming ..."). Then on kvm1 I use "migrate -d tcp:kvm2:4444" : It copies everything, then... the VM fails (any I/O disk gives an I/O error) ! And my VM file on kvm2, the one I created with touch, as still a size of 0 bytes. What am I doing wrong ? What is the exact command to use on kvm2 ? And what is the command to launch, in the monitoring mode, on kvm1 ?

  Read the article

• Force spin-down of external hard-drive on linux (raspberry pi)

  - by user258346

  I'm currently setting up a home-server using a Raspberry Pi with an external hard-disk connected via usb. However, my hard-drive will never spin down when being idle. I tried already the hints provided at raspberrypi.org ... without any success. 1.) sudo hdparm -S5 /dev/sda returns /dev/sda: setting standby to 5 (25 seconds) SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2.) sudo hdparm -y /dev/sda returns /dev/sda: issuing standby command SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...and 3.) sudo sdparm --flexible --command=stop /dev/sda returns /dev/sda: HDD 1234 ... without spin-down of the drive. I use the following hardware: Inateck FDU3C-2 dual Ports USB 3.0 HDD docking station Western Digital WD10EZRX Green 1TB Is it possible, that the sent spin-down-signals are somewhere overwritten/lost/ignored?

  Read the article

• JBoss 5 on AIX 5.3

  - by jess

  I am a very newbie for AIX and system monitoring. Actually our application currently run production on jboss 5.1 in AIX 5.3. Please check below configuration & system settings. AIX system configuration OS Level 5.3.9.0 (oslevel -g) Physical Memory size 24GB (svmon -G) Page space 4GB (lsps -s) processors 3 cores, Processor Type: PowerPC_POWER6, Processor Clock Speed: 4704 MHz (prtconf | grep Processor) Java version JRE 1.6.0 IBM AIX build pap6460sr10fp1-20120321_01 (SR10 FP1) (java -fullversion) JBoss configuration JBoss 5.1/JBoss ESB 4.11 Hornetq messaging with consumer flow control java opts : -d64 -Xms2g -Xmx4g -XX:MaxPermSize=1024m Sometime we observe very strange behavior in the JBoss that freeze without any error logs. Also server log stop without any further trace. We also not able to get thread dump (kill -3) and its not generate at that point. (kill -3 xxxxx works in normal circumstances) Only option available for us was restart the jboss server and its seem all messages that were in queues during the freeze time process after restarting. We try tweak some of setting in JBoss hornetq, we though issue was there. Hornetq Stuck By Default. But we haven't any luck and also unable to isolate the issue in any point. We looking at tool like nmon for monitoring this but no clue is that good enough to do so. Please provide some point to investigate this issue. Thanks

  Read the article

• Java Swing over Remote Desktop - Strange, weird GUI squashing

  - by ADTC

  I thought this question fits SuperUser more than StackOverflow because it's not about actual Java programming, though programmers might be more likely to encounter the problem. Anyway, let me start of with some stats before I ask the actual question: Laptop: Windows 7 x32 Screen resolution 1024 x 768; Nvidia GeForce Go 6200 Connected to desktop via ad-hoc wireless network Access internet via desktop Desktop: Windows 7 x64 Screen resolution 1920 x 1080 Connected to laptop via ad-hoc wireless network Access internet via cable modem I'm connecting to my laptop via Remote Desktop from my desktop to take advantage of the large screen. I'm doing programming on my laptop (for portability reasons). Everything else runs smooth and fast over Remote Desktop as both computers are connected directly over the ad-hoc wireless. The only problem is this: Java Swing apps don't display the GUI properly. I acquired a Java Swing application and I'm debugging it in Eclipse. Here's what I got when I ran the app: Apparently there doesn't seem to be anything wrong with the GUI application I'm debugging, because the Java Control Panel exhibits the same problem. I've searched high and low in Google about this; the closest I came to a solution is this. But sadly, the use of -Dsun.java2d.nodraw=true has no effect at all. This only happens over Remote Desktop. I have tried locally and the GUI apps display properly. This isn't a dealbreaker for me as I can stop using Remote Desktop when developing Java Swing apps. However, I would like to know if anyone has encountered this and found any solution. PS: All software involved (Eclipse, Java JRE, etc.) are latest versions.

  Read the article

• Caused by: java.net.SocketException: Software caused connection abort: socket write error

  - by jrishere

  I running JSP on Oracle 11g, Weblogic 10.3.4. I have 2 managed server and a oracle admin server installed. I am encountering an error where intermittently the log file of the 2 managed server and admin server will show java.net.SocketException: Software caused connection abort: socket write error. The application can run for 2 days without showing this error or it can show up a few times in a day. The server load are similar everday. When this error is been encountered, the server will just stop accepting connections and will not be able to access the application. Even if I try to access the application through localhost, I will not be able to access the JSP pages and a 503 http status is shown but then I am able to access the static HTML page. I will not be able to access the Oracle 11g Weblogic admin console page. When I take a look at admin server log, it shows that the managed servers are disconnected from the admin server and vice versa. Magically the application is able to recover by its own and the application is able to access again or I need to restart the server as restarting the service of the application does not work. The FTP connections that the application is connected to are closed as well. I am able to ping to telnet to the server port. The event log doesn't seem to be leaving any information. We did run wireshark to see the packet traffic and it seems that the application port is sending a RST, ACK packet to the load balancer. Any kind help will greatly be appreciated. Should you need more info, feel free to ask me. Thanks in advance.

  Read the article

• tcp connect hangs on SYN_SENT if something listens, gets CONN_REFUSED if nothing listens

  - by Amos Shapira

  I'm hitting a very strange problem - when I try to connect to one of our servers the client hangs with SYN_SENT if something listens on the port (e.g. Apache on port 80, sshd on port 22 or SMTP on port 25) but if I try to connect to a port on which nothing listens then I immediately get a "CONNECTION refused" error. Connecting to other applications (e.g. rsyncd on some arbitrary port) succeeds. I ran tcpdump on the server and see that the SYN packets arrive to it but it only sends a response if nothing listens on that port. e.g.: on the server I run: # tcpdump -nn port 81 06:49:34.641080 IP 10.x.y.z.49829 server.81: S 3966400723:3966400723(0) win 12320 06:49:34.641118 IP server.81 x.y.z.49829: R 0:0(0) ack 3966400724 win 0 But if I listen on this port, e.g. with nc -4lvvv 81 & Then the output of tcpdump is: 06:44:31.063614 IP x.y.z.45954 server.81: S 3493682313:3493682313(0) win 12320 (and repeats until I stop it) The server is CentOS 5, the client is Ubuntu 11.04, the connection is done between two LAN's over per-user TCP OpenVPN. Connection to other servers on that network do not have a problem. Connecting from the other servers on the same network to that server works fine. Connections from other clients in our office over openvpn is also not a problem. What am I missing? Thanks.

  Read the article

• tftpd-hpa service must be restarted before working after fresh boot

  - by Steve

  I'm running Ubuntu 12.04 inside a VirtualBox VM. I've installed tftpd-hpa so I can boot an embedded Linux device via tftp. My problem is that after a fresh boot of the VM, tftpd doesn't seem to work until I restart the service, after which is works great until the system is rebooted. The transcript below should explain the situation. EDIT: After the fresh boot, I execute netstat -a | grep tftp and find nothing. After restarting the service, the same command returns udp 0 0 *:tftp *:* (whitespace removed). I think this might be the key to the problem, I'm just not sure how to resolve it. I don't think it's related to this specific issue, but I had another problem with tftpd that was asked and answered in this question. steve@steve-VirtualBox:~$ cat /etc/default/tftpd-hpa # /etc/default/tftpd-hpa TFTP_USERNAME="tftp" TFTP_DIRECTORY="/var/lib/tftpboot" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="--secure" steve@steve-VirtualBox:~$ ls -l /var/lib/tftpboot total 8204 -rw-r--r-- 1 root root 34352 May 28 08:22 am335x-boneblack.dtb -rw-r--r-- 1 root root 33206 May 28 08:22 am335x-bone.dtb -rw-r--r-- 1 root root 41564 May 28 08:22 am335x-evm.dtb -rw-r--r-- 1 root root 38048 May 28 08:22 am335x-evmsk.dtb -rwxr-xr-x 1 root root 4117904 May 20 09:39 zImage -rw-r--r-- 1 root root 4117616 May 28 08:22 zImage-am335x-evm.bin steve@steve-VirtualBox:~$ tftp localhost tftp> get zImage Transfer timed out. tftp> quit steve@steve-VirtualBox:~$ sudo service tftpd-hpa restart [sudo] password for steve: tftpd-hpa stop/waiting tftpd-hpa start/running, process 2106 steve@steve-VirtualBox:~$ tftp localhost tftp> get zImage Received 4143798 bytes in 1.4 seconds tftp> quit steve@steve-VirtualBox:~$

  Read the article

• Menu command stuck on screen

  - by 280Z28

  For some reason, periodically when I select a menu command, the command label gets "stuck" on the screen and won't go away. I can close all open applications, including whichever one I was using when it got stuck, but it still won't go away. In the screenshot below, I opened an new instance of IE just to show how the label stays on top. The label was not created by this instance of IE. Edit with the source: The label that gets stuck is the first menu command I select in IE. If a label is already stuck, a new one does not get stuck (regardless of which instance(s) of IE are involved). Based on this knowledge, I now just open IE on my secondary monitor, carefully open the context menu so the Properties command is in the bottom corner, and click it. This is not a solution... The label never moves and is transparent to mouse input (if I click it, it's as if I clicked the item behind it). The label does not go away if I close all running applications. I haven't tried stopping services or closing system tray items like Live Mesh. The label does go away if I change the screen resolution and then change it back. Any ideas how I can stop this from happening? It's happened a half dozen times since yesterday and it's becoming quite disrupting to my work. Obviously I added the circle in MS Paint. That part isn't stuck. ;)

  Read the article

• Explorer.exe not starting after login on Windows Server 2003 (Terminal Services and console)

  - by Pepperoni Icecream

  When users login to a Windows Server 2003 R2 running Terminal Services they have a blank desktop. Upon inspection, explorer.exe is not running. When I login as administrator, using either RDP or to the console, I am having the same issue. I can pull up the taskman and start explorer.exe manually. I have another Terminal Server setup exactly the same way (same apps, settings, GPO, etc . . .) the only difference is we deployed Symantec Endpoint Client 11.0.5 on Friday. For some reason the working Terminal Server is still on 11.0.4, but the suspect server received the 11.0.5 client upgrade. I checked the eventviewer for any relevant explorer.exe entries to no avail. It seems that if SEP is preventing explorer.exe from starting at login it would do the same for the domain admin starting explorer.exe from the taskman. I disabled the SEP client and services on the server and issued smc -stop and tried logging in again. Still no explorer.exe. So I'm not sure if the client upgrade is relevant but it is worth mentioning since that was the last system change. The 2 servers are members of a NLB group. I took the bad terminal server out of the group until the issue is resolved. Actually stopped the host using NLB manager Any help is appreciated.

  Read the article

• It seems Windows 8.1 killed my two T60 laptop batteries

  - by rstock

  Upgraded Windows 7 to Win8 earlier this year, and last week upgraded to Windows 8.1. (Lenovo T60) Had no problem with battery usage when on Win7 nor Win8. After about a week of Win8.1 on my system, the battery stop working, while the system was on. The orange batt. indicator just keeps flashing. The system does not charge the battery (even though I know there was life in it). I installed a known good fully charged battery from another T60, it worked for aboute 40 mins then it instantly died in fron of my eyes. The system now shows the same orange flashing batt. light, but it is not charging. I know both these batteries are still good, they just appear to be dead. My research suggest that the new Win8.1 may not have updated the battery driver to Win8. I have since done that. Same problem. Research i s also pointing me to some 'smart chip' on the batteries that need to a reset. Is this possible ?? Does anyone know a process to reset the 'smart chip' on these batteries (fru# 92P1139) ????

  Read the article

• KVM guest VLAN aware problems

  - by baraka

  Hi, We are using Centos 5.5. as KVM host. It has two nics. One for management and the other one for services. As we have services in multiple vlans this nic is configured as a 802.1Q trunk. Any VM must be able to have access to any vlan, so host trunk interface is bridged to its tap interface and vlan is configured inside VM. Everything works fine while there is not heavy traffic. I can not find any log on guest or host, but, after some certain sustained big file transfer (about 6Gb) bridging stop working. Other guest on the same host continue working without problems. tcpdump on bridge interface is Ok, but on guest tap inferface I can see only outgoing traffic. Restarting bridge or rejoining tap interface doesn't provide any clue. Rebooting guest turns on bridge again. Bridge configuration is minimal: just addbr and addif (no stp). Any idea welcome!

  Read the article

• Interrupted system call during "hg convert"

  - by Aaron Digulla

  When I run "hg convert" to convert a Subversion repository to Mercurial, I get this error: fetching revision log for "/trunk" from 1538 to 0 run hg sink post-conversion action Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 46, in _runcatch return _dispatch(ui, args) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 454, in _dispatch return runcommand(lui, repo, cmd, fullargs, ui, options, d) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 324, in runcommand ret = _runcommand(ui, options, cmd, d) File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 505, in _runcommand return checkargs() File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 459, in checkargs return cmdfunc() File "/usr/lib/pymodules/python2.6/mercurial/dispatch.py", line 453, in <lambda> d = lambda: util.checksignature(func)(ui, *args, **cmdoptions) File "/usr/lib/pymodules/python2.6/mercurial/util.py", line 386, in check return func(*args, **kwargs) File "/usr/lib/pymodules/python2.6/hgext/convert/__init__.py", line 229, in convert return convcmd.convert(ui, src, dest, revmapfile, **opts) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 398, in convert c.convert(sortmode) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 312, in convert parents = self.walktree(heads) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 109, in walktree commit = self.cachecommit(n) File "/usr/lib/pymodules/python2.6/hgext/convert/convcmd.py", line 267, in cachecommit commit = self.source.getcommit(rev) File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 433, in getcommit self._fetch_revisions(revnum, stop) File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 814, in _fetch_revisions for entry in stream: File "/usr/lib/pymodules/python2.6/hgext/convert/subversion.py", line 122, in __iter__ entry = pickle.load(self._stdout) IOError: [Errno 4] Interrupted system call abort: Interrupted system call Apparently, it is possible to restart a read on EINTR but how would I do that with pickle.load()? Also I wonder where that signal comes from? I suspect it's SIGCHILD but shouldn't popen() handle that?

  Read the article

• Citrix Metaframe/RD - screen refresh weirdness

  - by southof40

  I access a clients W2003 machine (XEN Virtualization) using RD over Citrix Metaframe. Everything used to be fine. Some weeks ago things turned bad ! All is well initially but after, say, 5 minutes the screen will stop refreshing. Rather weirdly you can then still proceed in a way as you can make the screen refresh by getting the RD window to go through a restore/maximise cycle (this is only possible using the ALT-BREAK shortcut as everything else is locked up). This then allows you to proceed by typing something and going ALT-BREAK to see the results. Using menus is just not possible at all. There's some indications that clearing the java cache between sessions helps. Also that the lockup happens more quickly if you make the 'lots of stuff happen' on the screen - for instance if you do a directory listing of a big directory then often that will cause the lockup to occur. Similary opening a dense Excel workbook and then scrolling it will cause the lockup to occur. Any Metaframe veterans out there who recognise these symptoms ? I'd be very grateful as it's driving me nuts.

  Read the article

< Previous Page | 482 483 484 485 486 487 488 489 490 491 492 493  | Next Page >