Search Results

Search found 45752 results on 1831 pages for 'ubuntu linux'.

Page 486/1831 | < Previous Page | 482 483 484 485 486 487 488 489 490 491 492 493  | Next Page >

• Script to setup Ubuntu as a wireless access point on a bridge mode

  - by nixnotwin

  I use the following script to make my netbook a full-fledged wireless access point. It creates a bridge with eth0 and wlan0 and starts hostapd. #!/bin/bash service network-manager stop ifconfig eth0 0.0.0.0 #remove IP from eth0 ifconfig eth0 up #ensure the interface is up ifconfig wlan0 0.0.0.0 #remove IP from eth1 ifconfig wlan0 up #ensure the interface is up brctl addbr br0 #create br0 node hostapd -d /etc/hostapd/hostapd.conf > /var/log/hostapd.log & sleep 5 brctl addif br0 eth0 #add eth0 to bridge br0 brctl addif br0 wlan0 #add wlan0 to bridge br0 ifconfig br0 192.168.1.15 netmask 255.255.255.0 #ip for bridge ifconfig br0 up #bring up interface route add default gw 192.168.1.1 # gateway This script works efficiently. But if I want to revert back to use Network Manager, I cannot do it. The bridge simply cannot be deleted. How can I modify this script so that if I run bridge_script --stop, the bridge gets deleted, network manager starts and interfaces behave as if the machine had a fresh reboot.

  Read the article

• install AMD Driver on HP Pavilion dv6-6051er on ubuntu 13.10 amd64

  - by user1685095

  So... I've tried to follow this instructions After running sudo dpkg -i fglrx*.deb I got a bunch of errors about missing packages, so I've star?d to install them one by one and stuck on this one. Unpacking fglrx-dev (from fglrx-dev_12.104-0ubuntu1_amd64.deb) ... dpkg: dependency problems prevent configuration of fglrx: fglrx depends on lib32gcc1; however: Package lib32gcc1 is not installed. fglrx depends on dkms; however: Package dkms is not installed. dpkg: error processing fglrx (--install): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--install): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev: fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--install): dependency problems - leaving unconfigured Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Errors were encountered while processing: fglrx fglrx-amdcccle fglrx-dev sudo apt-get install lib32gcc1 Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: fglrx : Depends: dkms but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). So, what sould I do next to install this drivers?

  Read the article

• Ubuntu 12.10 is reading mouse battery as a laptop battery

  - by Ross Fleming

  I have a bluetooth mouse connected to my laptop. Much to my delight (I posted the suggestion!) the mouses battery is now displayed along side the laptop's battery. Unfortunately is is named simply "battery" in the drop down and "Laptop battery" once the power statistics windows is opened. The details of this battery correctly say that the model is a Lenovo Bluetooth Mouse, but it is still displayed as a "battery" and "laptop battery". Is there anyway to change this? Edit: Plus the "Show time in menu bar" shows the mouse's remaining battery percentage as opposed to the laptop battery's remaining time.

  Read the article

• Eclipse Crashes on Ubuntu 11.10

  - by Adrian Matteo

  I'm using Eclipse Indigo with aptana, to develope a rails application and it was working fine, but now it keeps crashing on startup. It opens and when the loading bars appear on the status bar, it goes gray (not responding) and the in closes without an error. Here is the output from the terminal when I ran it from there: (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (Eclipse:7391): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", 2012-05-27 16:05:58.272::INFO: Logging to STDERR via org.mortbay.log.StdErrLog 2012-05-27 16:06:00.586::INFO: jetty-6.1.11 2012-05-27 16:06:00.743::INFO: Started [email protected]:8500 2012-05-27 16:06:00.744::INFO: Started [email protected]:8600 2012-05-27 16:06:01.999::INFO: jetty-6.1.11 2012-05-27 16:06:01.029::INFO: Opened /tmp/jetty_preview_server.log 2012-05-27 16:06:01.046::INFO: Started [email protected]:8000 2012-05-27 16:06:01.071::INFO: jetty-6.1.11 2012-05-27 16:06:01.016::INFO: Started [email protected]:8300 ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded No bp log location saved, using default. [000:000] Browser XEmbed support present: 1 [000:000] Browser toolkit is Gtk2. [000:001] Using Gtk2 toolkit ERROR: Invalid browser function table. Some functionality may be restricted. [000:056] Warning(optionsfile.cc:47): Load: Could not open file, err=2 [000:056] No bp log location saved, using default. [000:056] Browser XEmbed support present: 1 [000:056] Browser toolkit is Gtk2. [000:056] Using Gtk2 toolkit ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded ** (Eclipse:7391): DEBUG: NP_Initialize ** (Eclipse:7391): DEBUG: NP_Initialize succeeded java version "1.6.0_23" OpenJDK Runtime Environment (IcedTea6 1.11pre) (6b23~pre11-0ubuntu1.11.10.2) OpenJDK 64-Bit Server VM (build 20.0-b11, mixed mode) java.io.FileNotFoundException: /home/amatteo/.eclipse/org.eclipse.platform_3.7.0_155965261/configuration/portal.1.2.7.024747/aptana/favicon.ico (No such file or directory) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.<init>(FileInputStream.java:120) at com.aptana.ide.server.jetty.ResourceBaseServlet.doGet(ResourceBaseServlet.java:136) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:487) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:362) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:729) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:324) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:505) at org.mortbay.jetty.HttpConnection$RequestHandler.headerComplete(HttpConnection.java:829) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:513) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:211) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:380) at org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228) at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:488) 2012-05-27 16:06:03.277::WARN: /favicon.ico: java.io.IOException: /home/amatteo/.eclipse/org.eclipse.platform_3.7.0_155965261/configuration/portal.1.2.7.024747/aptana/favicon.ico (No such file or directory) It was working perfectly till a few days ago!

  Read the article

• WPA2 authentication fails on Ubuntu 12.04 using Rosewill RNX-N1

  - by user94156

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. RNX-X1 works on other systems (including TV); also have 2 of 'em and tried each. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• unable to read/write CIFS mounts in Ubuntu 11.10

  - by Paul Collins

  upgraded my laptop from 11.04 too 11.10 and since then the CIFS mounts are not working before the upgrade it would allow mounts on host names, in 11.10 its only IP addresses (not much of an issue) however all the shares i mount are as Read only despite the FStab File declaring the options rw and auto, i have chowned the mount point to be nogroup.nouser and it still wont work, here is an extract from my FSTAB: //192.168.1.1/stories /home/paul/Documents/Stories cifs rw,user,exec,auto,username=,password= 0 0

  Read the article

• How can I install Cinnamon on Ubuntu 12.04 and eliminate the following errors:

  - by jaorizabal

  $ sudo apt-get install cinnamon cinnamon-session cinnamon-settings Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'cinnamon' instead of 'cinnamon-session' Note, selecting 'cinnamon' instead of 'cinnamon-settings' Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help resolve the situation: The following packages have unmet dependencies: cinnamon : Depends: gir1.2-muffin-3.0 but it is not going to be installed Depends: libcogl5 (>= 1.7.4) but it is not installable Depends: libmuffin0 (>= 1.0.0-0ubuntu1~precise) but it is not going to be installed Recommends: gnome-themes-standard but it is not going to be installed Recommends: gnome-session-fallback but it is not going to be installed E: Unable to correct problems, you have held broken packages. I added this PPA: sudo add-apt-repository ppa:merlwiz79/cinnamon-ppa Then ran the following command: sudo apt-get update && sudo apt-get install cinnamon cinnamon-session cinnamon-settings How can I install the latest Cinnamon desktop? How can I fix this error?

  Read the article

• Upgrade problem during Ubuntu 11.10

  - by pankaj singh

  During upgrading in last moment, show memory problem but I restart my laptop in hurry than it give that type of message what can i do? *starting automatic crash report generation [fail] PulseAudio configured for pre-user sessions saned disabled :edit/etc/default/saned *stopeing save kernel messages [ok] After than invoking init scripts through /etc/init.d, use the service(8) utility,eg. service S90binfmt-support start Since the scripts you are attempting to invoke has been converted to an Upstart pb, you may also use the start(8)utility, e.g start S90binfmt-support start:Unknown job:S90binfmt-support *Stopping anac(h)ronistic c[ok] *checking battery state.. [ok] * stopping System V runlevel compatibility [ok]

  Read the article

• Ubuntu Server 11.04 installs fine then gets stuck on USBHID

  - by SZetta

  ites! I have installed Server 11.04 many many times from this disc and they have always worked perfectly (installed and operated fine). I wanted to reinstall my server again on the same hardware so I threw the disc in and installed but once it finished installing the boot loader and ejected the disc, it decided to go unresponsive. I restarted it and it loaded in through the grub perfectly it seemed, but then it goes and says either that a ipv6 router is unavailable (even though I have it hardwired to my network) or it goes and says usbhid: USB HID core driver and goes unresponsive there. I am very confused as this never happened before from this install. I want to see if this is just me or what before I just go ahead and download the newest version of server. Any advice would be appreciated. Thanks

  Read the article

• Ubuntu / FileZilla FTP Set Up

  - by Dean Mark Anthony

  I have successfully installed VSFTPD and I have configured it to allow FTP connection from my Windows laptop running FileZilla. FileZilla is pointing at the directory srv/ftp on my server; the files that are stored in srv/ftp are showing in the Remote Site section of FileZilla. This indicates that it is connecting to my FTP server. What I need to do is point FileZilla toward the directory var/www so that all files that I transfer are visible on my self-hosted website. I cannot find out how to do this. Do I need to perform some updates to the vsftpd.conf file, and if so what do I change? Do I need to perform updates to my FileZilla console? I am comfortable in terms of changing .conf files, port forwarding and setting permissions etc. I just need to know what precisely needs to be changed. Much love...

  Read the article

• Problems Dual Boot

  - by user104108

  A few months I decided to install Ubuntu 12.04 on my PC alongside with my Windows 7 partition. In order to do that and avoid any mistake, I followed the steps of these tutorial: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/2/ Everything was going well until I decided to update to the 12.10 realese. I don't know what happened, but after I updated my Ubuntu, it stoped working, it didn't even launched, when I turned on my pc and choose to run "Ubuntu 12.04" on the Grub Screen, a weird messaged appeared. Well, so I decided to install the Ubuntu 12.10 and forget about the 12.04 partition, no problem. I erased the partitions used for the Ubuntu 12.04 with EaseUS partition Manager. However, when I start my PC, there is still the option of "Ubuntu 12.04" to chose, is that bad? And what about now, can I use the Windows Installer of Ubuntu ( http://www.ubuntu.com/download/help/install-ubuntu-with-windows ) to install the Ubuntu 12.10 ? What should I do to have Ubuntu 12.10 and Windows 7 in dual boot again? Thanks; Thales.

  Read the article

• How to connect nokia lumis 520 to ubuntu 12.04

  - by pavankumar

  i have done following steps sudo add-apt-repository ppa:langdalepl/gvfs-mtp sudo apt-get update and updated some upgrades from update manager after doing above steps i am able to see lumia phone name in file system.But when i try to mount device i am getting following errors Unable to mount RM-914|Nokia Lumia 520 Unable to open MTP device '[usb:001,010]' is there any way to solve these problem?

  Read the article

• Ubuntu black screen and icons messed up 12.04

  - by user69869

  I had a successful install when i updated from 11.10 but when i actually went to start it it hanged and the purple screen for a few seconds then flickered my boot screen then showed the desktop i cant interact its black i can see the icons marked out but no images they are just gray wireless doesnt connect it seems that it messed up all the drivers. i tried to stat the old version i had its the same exept i can interact most window close buttons are missing and most of the time it doesnt know what screen im on. any ideas on what i can do? oh and recovery mode shows alot of errors and doesnt do much i ran it for the old version and it just goes through failing and gives an error beep. Thanks in advance any advice is appreciated (note windows still works fine on this system... unfortunately ;D )

  Read the article

• Bluetooth driver not working in ubuntu 12.04 hp pavillion dv6 6155tx

  - by Arin Chakraborty

  In my Hp Pavillion dv6 6155-tx everything is working just fine except for the Bluetooth. I have pretty much tried every bluetooth software out there but none seems to work. It seems that the driver is not installed or something like that. When i search for new devices it just dont find any device and the vice versa. Please kindly help me ! I am frustrated for more than 4 months now searching for some answers. The output of rfkill list :- 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Ubuntu, Gnome, PAM and ecryptfs

  - by Michel

  I would like to have a directory accessible to a couple of users, and not readable by maintenance types ... I can do what I want using ecryptfs and a password known only to the "couple of users" in question, who then can mount the directory and use as they see fit. I would love to be able to automate that process and unlock the directory at login - again, only for the "couple users" in question, without asking a password. Gnome-keyring is able to store passphrases/passwords encrypted; and, apparently, if I could get a key identity to ecryptfs, Gnome PAM modules would allow the key with that identity to be unlocked, and the directory could be mounted. Alas, I have found no way to go from point A (Gnome PAM keyring module) to point B (use the unlocked key in ecryptfs). Another use of the same mechanism would allow to build a "key escrow" mechanism, where keys to encrypted volumes are safekept with, e.g., HR; so that company information in encrypted directories can be recovered if you pass under the proverbial bus.

  Read the article

• Ubuntu Lagging even LXDE freezes

  - by Anas Ismail Khan

  Laptop, i3, Ram: 2GB. Using 14.04LTS... and it lags like hell. Even if i open more than 4 tabs in Chrome, it freezes, and often I have no choice but to restart and multi-tasking is kinda difficult and at times impossible. Now there's whole thing about Lubuntu and LXDE that are suposed to be super-fast.. installed LXDE.. mind, not lubuntu-desktop. just LXDE. And it too freezes every now and then, and trust this.. when it freezes, it does so worse than Unity.. ESPECIALLY when i start PCManFM... and mount a disk or two... Any ideas as to why this is happening.. The minimum requirements for Unity are supposed to be 1Gig RAM.. and people are running it fine even on 512 MB...

  Read the article

• libnotfy1(>= 0.4.4) and libnotify1-gtk2.10 for Ubuntu 11.10

  - by Aamir

  I have recently downloaded the latest version of Lotus Symphony 3.0.1 but whenever I try to install it, it shows the following dependencies. Can anybody tell where I can find these dependencies. dpkg: dependency problems prevent configuration of symphony: symphony depends on **libnotify1 (>= 0.4.4)**; however: Package libnotify1 is not installed. symphony depends on **libnotify1-gtk2.10**; however: Package libnotify1-gtk2.10 is not installed. dpkg: error processing symphony (--install): dependency problems - leaving unconfigured Errors were encountered while processing: symphony

  Read the article

• Ubuntu Oneiric + Awesome WM

  - by janjust

  I upgraded to oneiric ocelot, running awesome wm. Everything works, more or less, fine but one thing I've noticed is that now my menu fonts and my menu symbols are larger than I'd like them to be. I used to set them in font settings, but now (for one I don't even know where font settings are anymore, I tried gnome-tweak-tool) the font-settings are gone? Surely I'm missing something. My prime example is the program evince whose symbols are ginormous. Any hints how to tweak it?

  Read the article

• Black screen while booting, after installing installing AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver on HP pavilion dm4

  - by Megharaj

  HP Pavilion dm4 with configuration as shown below cpu intel Core i5 2.26 GHz RAM 4.0 GB Graphics processor 512MB ATI Mobility Radeon(TM) HD 5450 switchable graphics [HDMI, VGA]. I installed ubuntu 10.04 ( without AMD graphics driver) it was working fine, but when I installed AMD graphics drivers AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, than the problem started from then When I boot I was get black screen. Than I thought to upgrade from ubuntu 10.04 to 12.04 using the bootable pen drive but was getting black screen than read on some forums that was because of the switchable graphics, than upgraded ubuntu 12.04 by setting to "nomodeset". It was working, again thought to install graphics driver AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, again after installing this, when I boot I am getting blank scree . Can anyone help me to inatall ubuntu 12.04 along with AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver. Any help is highly appreciated.

  Read the article

• "A Disk Read Error" while starting Windows after Ubuntu upgrade + Boot Repair

  - by bludger

  I just upgraded to 12.10. After installing the files and rebooting I had come across following problem: error file not found grub rescue _ This problem was easily solved by repairing the boot using Boot Repair tool. This answer helped me. But after this, Windows won't start. It's giving following error: A disk read error has occurred Press Ctrl+Alt+Del to restart How do I fix this?

  Read the article

• Extra buttons on Razer Anansi on Ubuntu 13.04

  - by jjpe

  I own a Razer Anansi keyboard and recently installed 13.04 after running 12.04 for over a year. On 12.04 I used xmodmap to map the thumb and macro keys to do useful stuff for me. This solution is based on keycodes which are triggered when a key is recognized. The problem is that on 13.04 this does not work for all keys anymore. The thumb keys T2, T3 and T4 (i.e. the middle 3 ones on the top of the 2 rows) in particular don't generate keycodes anymore while the rest still does. Now this is not completely surprising: pressing the affected keys in Unity generates notifications for what looks like Unity touchpad notifications. How can I shut that touchpad-subsystem up once and for all and give my keyboard keys back to my keyboard? Ideally I'd like to be able to use my .Xmodmap file again in 13.04 (and beyond) as that seems to me the most simple solution, but working alternatives are also welcome.

  Read the article

• Compile latest blender on ubuntu 12.0464bit?

  - by gabriel

  What i want is to compile latest blender from SVN. I am using this guide My issues are: How can i install it with the final .deb created file and how can i give this package to a ppa! So, when i execute sudo apt-get update; sudo apt-get install subversion build-essential gettext \ libxi-dev libsndfile1-dev \ libpng12-dev libfftw3-dev \ libopenexr-dev libopenjpeg-dev \ libopenal-dev libalut-dev libvorbis-dev \ libglu1-mesa-dev libsdl1.2-dev libfreetype6-dev \ libtiff4-dev libavdevice-dev \ libavformat-dev libavutil-dev libavcodec-dev libjack-dev \ libswscale-dev libx264-dev libmp3lame-dev python3.2-dev \ libspnav-dev it gives me this The following packages have unmet dependencies: libjack-dev : Depends: libjack0 (= 1:0.121.0+svn4538-3ubuntu1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I know that skype does not allow the installation of those libraries. Thanks

  Read the article

• I cannot save php.ini in ubuntu 12.04

  - by Ashok KS

  I want to change the upload_max_filesize = 2M to 50M, then I started edit on php.ini, but when try to save it, it displays error message below Could not create a backup file while saving /etc/php5/apache2/php.ini gedit could not back up the old copy of the file before saving the new one. You can ignore this warning and save the file anyway, but if an error occurs while saving, you could lose the old copy of the file. Save anyway?

  Read the article

• Hash Sum Mismatch using preseed (Ubuntu Server 12.04)

  - by xorma

  My install through Preseed fails at around 80% on Select and Install Software. In VT-4, I can see Hash Sum mismatch errors. This may be because I am going through a firewall which is caching files. There is no-cache option for apt but I can't seem to get it to work with Preseed. Have tried: d-i debian-installer/no-cache string true d-i apt-setup/no-cache boolean true d-i preseed/early_command string mkdir -p /target/etc/apt/apt.conf.d; echo "Acquire::http {No-Cache=True;};" > /target/etc/apt/apt.conf.d/no-cache but none of these are working. It appears that the early_command occurs too early so is over written once install starts. I'm not sure if the other commands are even correct. Anyone know what is the correct way of disabling achieving this through Preseed?

  Read the article

• ubuntu 12.04 not responding after software update

  - by Loukas

  Yesterday, I did a software update and since then the system became unusable. To be more precise, I login and then I see only the background image without any bars, images etc.. This happened after updating the system. Please find here the relevant part /var/log/apt/history.log. I'm running 64 bit 12.04 distribution on nVidia. The 2-3 first restarts after the upgrade it was complaining about compiz/unity crashes and then the situation is as described above. I would be the most grateful of you could help me on this. Best regards, Loukas Start-Date: 2012-06-05 10:31:42 Commandline: aptdaemon role='role-commit-packages' sender=':1.77' Upgrade: libpolkit-backend-1-0:amd64 (0.104-1, 0.104-1ubuntu1), libgnome-control-center1:amd64 (3.4.1-0ubuntu2, 3.4.2-0ubuntu0.2), libgl1-mesa-dri:amd64 (8.0.2-0ubuntu3, 8.0.2-0ubuntu3.1), libgl1-mesa-dri:i386 (8.0.2-0ubuntu3, 8.0.2-0ubuntu3.1), libgl1-mesa-glx:amd64 (8.0.2-0ubuntu3, 8.0.2-0ubuntu3.1), libgl1-mesa-glx:i386 (8.0.2-0ubuntu3, 8.0.2-0ubuntu3.1), libpolkit-gobject-1-0:amd64 (0.104-1, 0.104-1ubuntu1), gnome-control-center-data:amd64 (3.4.1-0ubuntu2, 3.4.2-0ubuntu0.2), libglapi-mesa:amd64 (8.0.2-0ubuntu3, 8.0.2-0ubuntu3.1), libglapi-mesa:i386 (8.0.2-0ubuntu3, 8.0.2-0ubuntu3.1), policykit-1:amd64 (0.104-1, 0.104-1ubuntu1), software-center:amd64 (5.2.2.1, 5.2.2.2), update-manager:amd64 (0.156.14.4, 0.156.14.5), update-manager-core:amd64 (0.156.14.4, 0.156.14.5), libxatracker1:amd64 (8.0.2-0ubuntu3, 8.0.2-0ubuntu3.1), libpolkit-agent-1-0:amd64 (0.104-1, 0.104-1ubuntu1), gnome-control-center:amd64 (3.4.1-0ubuntu2, 3.4.2-0ubuntu0.2), libglu1-mesa:amd64 (8.0.2-0ubuntu3, 8.0.2-0ubuntu3.1), libglu1-mesa:i386 (8.0.2-0ubuntu3, 8.0.2-0ubuntu3.1) End-Date: 2012-06-05 10:32:51

  Read the article

< Previous Page | 482 483 484 485 486 487 488 489 490 491 492 493  | Next Page >