Search Results

Search found 16794 results on 672 pages for 'memory usage'.

Page 487/672 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

  • Sometimes, Synaptics Touchpad Tends Cursor to Top-Right Corner

    - by John Chadwick
    This has been a reoccurring issue for me, pretty much since I've owned this laptop (an ASUS G60JX.) Sometimes, the cursor will stop working properly and instead tend toward the top right of the screen. Basically, sometime into my usage (maybe after a couple hours) the touchpad will inevitably begin to malfunction, where it has confusing patterns of pushing the mouse cursor toward the top right of the screen. In addition, certain features (like momentum) seem to quit working entirely. It makes using the cursor extremely difficult. I've been having this issue across very many drivers. Pretty much as soon as multitouch came into the mix, although I don't believe multitouch has anything to do with it. It appears that, in the state of malfunction, it doesn't matter how you touch the touchpad, but where you touch it. Certain regions do not seem to trigger the cursor to move to the top right corner. In fact, no specific region seems to, but some areas do so more often than others. The issue can be resolved temporarily by putting the computer into sleep mode and awakening it. I have found no way to recreate this success without sleeping the computer or rebooting. Disabling and re-enabling the touchpad device does not do anything to resolve the problem. This issue does not affect my WACOM tablet nor any USB mice, and can be resolved (not to my satisfactory) by uninstalling the touchpad drivers. I'm looking for a solution, or at least a workaround that doesn't require sleep mode.

    Read the article

  • Screen Flickering: Hardware or Software?

    - by Wesley
    I have a Samsung N120 netbook (upgraded to 2GB DDR2 RAM) and there has been a screen flickering issue for some time now. However, I have not been able to accurately determine whether it is a software or hardware issue. Here are some of the symptoms: The flicker is white-colored and shows up as vertical lines. Flickering or not, there may be occasionally some random blue patterns (no image distortion) The screen tends to flicker more when the screen is not tilted back all the way. When tilting the screen back and forth, the screen will usually flicker. Some images on the screen may randomly distort without full-on flickering. The screen will flicker only on certain websites, but not on others. A certain part of a webpage may constantly be distorted randomly, even when scrolling. While flickering, the mouse will not move though I'm moving my finger along the touchpad. A connected external monitor does not have any problems. The flickering is completely random and does not seem to follow any CPU/GPU usage trends. Flickering usually gets worse when the screen brightness is turned higher. There will be flickering on battery and while plugged in. Search up "Samsung N120 - Screen Flickering" on YouTube for an idea of what the flickering looks like. However, there is no visible distortions and the flickering seems to stop when the screen has dimmed. Since the problems started, I tried formatting and using Windows 7, then formatted again and went back to Windows XP. The screen was also replaced sometime during this past summer. The uninstallation of the Samsung Battery Manager (on the original install of XP) seemed to reduce the flicker partially, but eventually got worse. So, what could possibly be the problem?

    Read the article

  • Website has become slower on a VPS, was much fast on a shared host. What's wrong?

    - by Arpit Tambi
    My shared host suspended my website stating system overload, so I moved my website to a VPS which has 4GB RAM. But for some reason the website has become very slow. This is the vmstat output - procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 3050500 0 0 0 0 0 1 0 0 0 0 100 0 0 Here's the Apache Benchmark output for a STATIC html page I ran on the server itself - Benchmarking www.ask-oracle.com (be patient)...apr_poll: The timeout specified has expired (70007) Total of 20 requests completed Update: Server Config: List item Centos 5.6 4 cores cpu 4 GB RAM LAMP stack with APC Wordpress Only one website It takes almost double time to load now, same website was much fast on shared hosting. I know I need to tweak some settings but have no clue where to start from? I have already tried to optimize apache, mysql etc. Update 2: CPU usage is low, see uptime output: 11:09:02 up 7 days, 21:26, 1 user, load average: 0.09, 0.11, 0.09 Update 3: When I load any webpage, browser shows "Waiting" for a long time and then page loads quickly. So I suspect server can accept only limited connections and holds extra connections in a waiting state. How to check this? Update 4: Following is the output on executing netperf TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost.localdomain (127.0.0.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 9615.40 [root@ip-118-139-177-244 j3ngn5ri6r01t3]# Here are the Apache MPM settings from httpd.conf, do they look okay? <IfModule worker.c> StartServers 5 MaxClients 100 MinSpareThreads 50 MaxSpareThreads 250 ThreadsPerChild 125 MaxRequestsPerChild 10000 ServerLimit 100 </IfModule>

    Read the article

  • Missing MB on a GPT partioned SSD

    - by pisswillis
    I recently installed Arch Linux on an Intel 40GB SSD. I used GPT for partioning (via GNU parted) and created the following partions: /dev/sda1 : 1 MB, no FS, flag=bios_grub /dev/sda2 : 30MB, /boot, ext2, flag=boot /dev/sda3 : 20GB, /home, ext4 /dev/sda4 : ~20GB, /, ext4 After struggling to install grub2 from the livecd environment (which I finally did via grub-install /dev/sda --root-directory=/mnt/ --no-floppy --force) I got a working system. However, when I was inspecting disk usage with df I noticed that my home partition had around 170MB of used space on it. This surprised me because the only things on /home were one users .bashrc, .bash_history, and .lesshst. du confirmed that there was only a few KB of space being used on /home. Why does df report approximately 170MB being used when du does not? Is this space "gone forever", or can I regain it by repartioning and/or reinstalling? When I installed grub2 it said something along the lines of "your embed area is too small", and that I could "use BLOCKLISTS, but BLOCKLISTS are UNRELIABLE". In the end the only way I could get a system booting from the SSD was to use blocklists via the grub-install --force flag. Is this related to the mysterious missing 170MB? Thanks

    Read the article

  • MySQL partition "full"?

    - by gdea73
    I have a server that runs Debian 6.2, with Apache, PHP5, and MySQL. Well, I hadn't done anything with MySQL at all so far, just Apache and PHP; I must have installed it (mysql-server) at some point along the line, and I decided to login to the database for the first time a couple days ago as I was considering using the database for a future website project. I noticed that the "root" user had a password, and I didn't recall having set one. My usual root password was incorrect. So I attempted to reset the password. sudo service mysql stop (stopped successfully) sudo /usr/bin/mysqld_safe --skip-grant-tables --skip-networking & started successfully, from what I can tell. However, mysql itself returns "Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld,sock' (2)", and additionally sudo service mysql start returns "/etc/init.d/mysql: ERROR: The partition with /var/lib/mysql is too full! ... failed!" df -h tells me that / is 26% used, a 20GB partition, and /home, roughly 900GB, has only 5% usage. On a potentially related note, I've been experiencing random hangs since I noticed this problem, my tty2 randomly froze several times while idle, and the entire system is suddenly unstable. gnome-terminal also does not open. (Gnome-terminal apparently works now, disregard that part, but the server is still being somewhat unstable, I randomly lost connection when I was SSHed into it from my laptop, twice now.)

    Read the article

  • Is there a way to exclude a specific drive vdi from "snapshots" in VirtualBox?

    - by Graza
    ...or is there another space-efficient way of dealing with the page/swap file of the Guest O/S? I've realised that its quite possible/likely that one of the things which "bloats" the snapshot/diff vdi's when a snapshot is taken is the guest operating system's pagefile. For example, say I have a 2Gb swap-file in a Windows guest OS, and over the course of a few weeks the usage of the swap file has gone over 1Gb a couple of times. When I next create a snapshot, it seems likely that I'd be almost guaranteed around 1Gb of space taken up in the new differencing disk just because of changes in the swap file. Obviously (provided I never did "live" snapshots on running or paused machines, and only ever did them when the machine was shut down), I would not need any of the information in the swap file to be saved. So this would simply be a waste of 1Gb. I'm wondering if there's a way to attach a vdi to a VM and flag it as "exclude from snapshots" - which would mean I could put the swap file on a different vdi which would never be included in a snapshot. Or if anyone has any other suggestions. Or an explanation about why it might not be an issue. I could obviously delete and recreate a swap drive vdi every time I did a snapshot to achieve the same effect, but this is a little more effort than simply clicking "create snapshot"....

    Read the article

  • Wireless card on HP laptop not working

    - by D. Strout
    I just bought an HP Envy m6-1125dx online from Best Buy. When I got it home and started it up, the wireless card did not work well - at all. I could connect, but any real usage would cause the connection to start dropping every 30 seconds or so, and it would be really slow. Taking another look at the reviews on the Best Buy site, it seems only a few others had this problem, so I took it to my local Best Buy and exchanged it for another unit. Got it home again and the card had the same issues. Which leads to my dilemma. First: does this model have several different cards that it could come with? Mine is a Ralink RT5390R (on both units I received). If it does, then I can keep exchanging until I get a unit with a different card. I wouldn't ask this, except it seems weird that only a few people mentioned this issue, so I thought that might be one possibility. I looked in to replacing the card with a different one myself, but it seems that HP blocks certain wireless cards. However, some people reported success in replacing the card, and this site said it was only an issue on "older HP computer[s]". Can anyone confirm this? Finally, if that fails/will not work, does anyone know what I can get through Best Buy? I am concerned that they will not put any different card than the Ralink, and after two of those, I don't want that. Can I ask Best Buy support to use a different card? Can they even get another card from HP? I guess the base question is: should I attempt to replace the card myself (two days via Amazon to get a new card), should I try to get the laptop repaired through Best Buy (two - four weeks), should I go for a different model laptop from Best Buy, or should I try a different unit of the same model (three's the charm?).

    Read the article

  • Arch Linux: How to handle patches which only you will use?

    - by user12932
    I'm using freerdp together with xmonad and it has been giving me a lot of trouble. The super key (or "windows key") is my mod key in xmonad and it has been interfering with my freerdp usage rather annoyingly. Whenever I switched workspaces (or did anything else in xmonad involving the super key), windows (controlled by the freerdp instance in focus) registered a keypress as well. This event combined with the loss of focus got the super key stuck in windows indefinitely: the press of the keys d and r would first show my desktop, then open the run dialog (as if I was pressing the windows key constantly). I've tried several versions of freerdp, but all exhibited this annoying behavior. So I resorted to patching freerdp myself to just ignore the left super key on my keyboard. I love free software for a lot of reasons (especially the ability to alter things like this myself), however I still find it annoying to patch and rebuild freerdp on all version (and dependency) changes. How do you deal with situations like this? Is there even a "right way" to resolve this issue?

    Read the article

  • What Is The Proper Laptop Battery Care While Running Laptop Solely On Battery?

    - by Boris_yo
    Because of convenience, I had to move my laptop to another room away from room where I always ran laptop on UPS without using battery. Since so far I always run laptop on battery, I question the proper usage to prolong battery life. Currently I run laptop on battery with power supply so battery is constantly being charged until it is full 100% and when it is, I disconnect power supply and continue working until battery meter shows 10% remaining. That's when I plug in power supply and let it charge until 100% once again while I work. But it takes a lot of time to fully charge laptop while working since my power supply is 60W which should be the reason of such slow charge and I think the kind of charger that I use is express charger. The thought of charging laptop until full, all while doing my work makes me think that if it takes way more time to charge, it might keep battery running warm for the period of charging time which brings me to question about whether I should keep running laptop as I've described above or it would be better to leave power supply constantly connected to laptop to keep battery between 99%-100%? On one hand it won't keep battery warm but it will try to frequently supply charge to battery once it gets 99% to replenish charge to 100% (which might reduce battery life?). On the other hand if I'll keep working solely on battery and recharge it when below 10%, the battery will get warm but only when charged. Can anybody suggest the correct way of running laptop on battery to ensure better battery life? Dell Latitude E6420 Windows 7 64-bit

    Read the article

  • SQL Server becomes slow after restart

    - by Tobi DM
    I already posted this one on stackoverflow but someone gave me the hint to that I might have more luck on serverfault. We use SQL Server 2005 on an Windwos Server 2008. Ther Server has 48 GB RAM. SQL Server is configured to use 40 GB RAM. There is only one database hosted (About 70 GB). The only app beside SQL Server is our App-Server which connects the clients to the database. Now we encounter the following problem: After a restart of the server our the performance is great. The server grabs the 40 GB RAM wich it is allowed to and then runs fast as hell. But after about 4 weeks the system becomes slower and slower. The execution of statements (seen in the profiler) is raising slowly. But I cannot see that there is something going wrong on the server. CPU usage is at about 20% I/O also seems to be no Problem The process monitor does also not show that there are strange apps or something like that. Eventlog does also have no interessting messages No open transactions or blockings to see We do not use cursors in our app We tried already the following things without effect: Droped the cache by using the statements DBCC FreeProcCache DBCC FREESYSTEMCACHE('ALL') DBCC DropCleanbuffers Restarted the Appserver we are using. Restart the sql server service But nothing did help exept restarting the whole server. Any ideas?

    Read the article

  • erlyvideo server doesn't start automatically after reboot

    - by electroid
    I have installed erlyvideo server on ubuntu 9.10 karmic koala. Everything works fine, but after server reboot I have to start erlyvideo server manually with /etc/init.d/erlyvideo start. I try allready update-rc.d and I think erlyvideo by default should start automaticaly. Any help will be appreciated. Here erlyvideo startup script located in /etc/init.d/erlyvideo: #!/bin/sh ### BEGIN INIT INFO # Provides: erlyvideo # Required-Start: $local_fs $network # Required-Stop: $local_fs $network # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: starts the erlyvideo streaming server # Description: starts the erlyvideo using erlang system ### END INIT INFO case "$1" in start) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; stop) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; restart) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; soft-restart) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; upgrade) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; reconfigure) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; reboot) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; ping) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; console) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; attach) cd /opt/erlyvideo && ./bin/erlyvideo "$1" ;; attach-erl) cd /opt/erlyvideo && ./erts-5.8.4/bin/erl -name [email protected] -remsh [email protected] ;; *) echo $"Usage: $0 {start|stop|restart|soft-restart|upgrade|reboot|ping|console|attach}" exit 1 esac exit 0 And I have found S91erlyvideo in /etc/rc2.d next to S91apache2 which starts just fine on every reboot.

    Read the article

  • Why do hosts prefer Linux to Windows Server?

    - by iconiK
    So far I see a HUGE majority of hosts provide only Linux shared hosting, providing Windows only to VPS (or even to only dedicated servers). Why is it so? While Windows is a lot more expensive than Linux (though it depends on a lot of factors, not just initial and support license cost), it also provides ASP.NET, IIS and of course, Microsoft SQL Server. I know in the past it might have been because of cPanel being Linux only but now they have a Windows version. But still, why is Linux predominantly used on shared hosting? PHP works on both systems. IIS can be (and probably is) faster. MySQL runs on both systems as well. cPanel has a Windows version. Python, Perl, Ruby, all run on Windows as well. You even have MS SQL Server Express, which I find more superior than MySQL in both speed and features. Access is there for low usage requirements, as is SQLite (which is so great for quick small stuff). And with PowerShell you have a good alternative to the Unix shell. EDIT: I am looking for common reasons, I realize each hosting company (and/or it's clients) may have different needs. This becomes very important when you get to VPS or Cloud which give you a full operating system to use.

    Read the article

  • Solr startup script problem

    - by Camran
    I have installed solr and it works finally... I have now problems setting it up to start automatically with a start command. I have followed a tutorial and created a file called solr in the /etc/init.d/solr dir... Here is that file: #!/bin/sh -e # SOLR auto-start # # description: auto-starts solr engine # processname: solr-production # pidfile: /var/run/solr-production.pid NAME="solr" PIDFILE="/var/run/solr-production.pid" LOG_FILE="/var/log/solr-production.log" SOLR_DIR="/etc/jetty" JAVA_OPTIONS="-Xmx1024m -DSTOP.PORT=8079 -DSTOP.KEY=stopkey -jar start.jar" JAVA="/usr/bin/java" start() { echo -n "Starting $NAME... " if [ -f $PIDFILE ]; then echo "is already running!" else cd $SOLR_DIR $JAVA $JAVA_OPTIONS 2> $LOG_FILE & sleep 2 echo `ps -ef | grep -v grep | grep java | awk '{print $2}'` > $PIDFILE echo "(Done)" fi return 0 } stop() { echo -n "Stopping $NAME... " if [ -f $PIDFILE ]; then cd $SOLR_DIR $JAVA $JAVA_OPTIONS --stop sleep 2 rm $PIDFILE echo "(Done)" else echo "can not stop, it is not running!" fi return 0 } case "$1" in start) start ;; stop) stop ;; restart) stop sleep 5 start ;; *) echo "Usage: $0 (start | stop | restart)" exit 1 ;; esac Whenever I do solr -start I get this error: "Error occurred during initialization of VM Could not reserve enough space for object heap" I think this is because of the file above... Also here is where I have solr installed: var/www/solr and here is the start.jar file located: var/www/start.jar Help me out if you know whats causing this. Thanks BTW: OS is ubuntu 9.10

    Read the article

  • ClassNotFoundException returned for all plugins

    - by razumny
    I am trying to use a Java applet (any Java Applet), but I always get a messages saying "Error. Click for details". When I do so, the pop-up says: Application Error ClassNotFoundException jreVerification.class When I click the "Details" button, all I see is the following: Java Plug-in 10.7.2.10 Using JRE version 1.7.0_07-b10 Java HotSpot(TM) Client VM User home directory = C:\Users\razumny ---------------------------------------------------- c: clear console window f: finalize objects on finalization queue g: garbage collect h: display this help message l: dump classloader list m: print memory usage o: trigger logging q: hide console r: reload policy configuration s: dump system and deployment properties t: dump thread list v: dump thread stack x: clear classloader cache 0-5: set trace level to <n> ---------------------------------------------------- I am running Windows 7 Professional, and am up to date on patches. The problem occurs in Google Chrome, Mozilla Firefox and Internet Explorer, regardless of what Java Applet I am running. The error I quoted above came from here: http://java.com/en/download/installed.jsp?detect=jre I have attempted the following to rectify the issue: Uninstall and reinstall Java Uninstall Java, reboot, install Java Uninstall Java, delete all registry entries, reboot, install Java In addition, I have run Malware and Virus scans, none of which have shown anything of relevance. At this point, I am at my wit's end, and so, I turn to you.

    Read the article

  • Pip installs on Archlinux fails to build egg

    - by stmfunk
    I was trying to install nltk on my Archlinux server but it repeatedly fails with the following error output /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'entry_points' warnings.warn(msg) /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'zip_safe' warnings.warn(msg) /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'test_suite' warnings.warn(msg) usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...] or: setup.py --help [cmd1 cmd2 ...] or: setup.py --help-commands or: setup.py cmd --help error: invalid command 'bdist_egg' /tmp/pip_build_root/nltk/distribute-0.6.21-py3.3.egg Traceback (most recent call last): File "./distribute_setup.py", line 143, in use_setuptools raise ImportError ImportError During handling of the above exception, another exception occurred: Traceback (most recent call last): File "", line 16, in File "/tmp/pip_build_root/nltk/setup.py", line 23, in distribute_setup.use_setuptools() File "./distribute_setup.py", line 145, in use_setuptools return _do_download(version, download_base, to_dir, download_delay) File "./distribute_setup.py", line 125, in _do_download _build_egg(egg, tarball, to_dir) File "./distribute_setup.py", line 116, in _build_egg raise IOError('Could not build the egg.') OSError: Could not build the egg. ---------------------------------------- Cleaning up... Command python setup.py egg_info failed with error code 1 in /tmp/pip_build_root/nltk Storing complete log in /root/.pip/pip.log This error is also occurring for matplotlib buts thats the only other library I found it to fail on so far. pyyaml installs fine. The install works perfectly under virtualenv on my mac which is using python 2.7 but the server is using python 3.3. Any help is appreciated.

    Read the article

  • Slow filesystem access

    - by danneh3826
    I'm trying to diagnose a slow filesystem issue on a server I look after. It's been ongoing for quite some time, and I've run out of ideas as to what I can try. Here's the thick of it. The server itself is a Dell Poweredge T310. It has 4 SAS hard drives in it, configured at RAID5, and is running Citrix XenServer 5.6. The VM is a (relatively) old Debian 5.0.6 installation. It's given 4 cores, and 4Gb's of RAM. It has 3 volumes. A 10Gb volume (ext3) for the system, 980Gb volume (xfs) for data (~94% full), and another 200Gb volume (xfs) for data (~13% full). Now here's the weird thing. Read/write access to the 980Gb volume is really slow. I might get 5Mb/s out of it if I'm lucky. At first I figured it was actually disk access in the system, or at a hypervisor level, but ruled that out entirely as other VMs on the same host are running perfectly fine (a good couple hundred Mb/s disk r/w access). So then I started to target this particular VM. I started thinking it was XFS, but to prove it I wasn't going to attempt to change the filesystem on the 980Gb drive, with years and years of billions of files on there. So I provisioned the 200Gb drive, and did the same read/write test (basically dd), and got a good couple hundred Mb/s r/w access to it. So that ruled out the VM, the hardware, and the filesystem type. There's also a lot of these in /var/log/kern.log; (sorry, this is quite long) Sep 4 10:16:59 uriel kernel: [32571790.564689] httpd: page allocation failure. order:5, mode:0x4020 Sep 4 10:16:59 uriel kernel: [32571790.564693] Pid: 7318, comm: httpd Not tainted 2.6.32-4-686-bigmem #1 Sep 4 10:16:59 uriel kernel: [32571790.564696] Call Trace: Sep 4 10:16:59 uriel kernel: [32571790.564705] [<c1092a4d>] ? __alloc_pages_nodemask+0x476/0x4e0 Sep 4 10:16:59 uriel kernel: [32571790.564711] [<c1092ac3>] ? __get_free_pages+0xc/0x17 Sep 4 10:16:59 uriel kernel: [32571790.564716] [<c10b632e>] ? __kmalloc+0x30/0x128 Sep 4 10:16:59 uriel kernel: [32571790.564722] [<c11dd774>] ? pskb_expand_head+0x4f/0x157 Sep 4 10:16:59 uriel kernel: [32571790.564727] [<c11ddbbf>] ? __pskb_pull_tail+0x41/0x1fb Sep 4 10:16:59 uriel kernel: [32571790.564732] [<c11e4882>] ? dev_queue_xmit+0xe4/0x38e Sep 4 10:16:59 uriel kernel: [32571790.564738] [<c1205902>] ? ip_finish_output+0x0/0x5c Sep 4 10:16:59 uriel kernel: [32571790.564742] [<c12058c7>] ? ip_finish_output2+0x187/0x1c2 Sep 4 10:16:59 uriel kernel: [32571790.564747] [<c1204dc8>] ? ip_local_out+0x15/0x17 Sep 4 10:16:59 uriel kernel: [32571790.564751] [<c12055a9>] ? ip_queue_xmit+0x31e/0x379 Sep 4 10:16:59 uriel kernel: [32571790.564758] [<c1279a90>] ? _spin_lock_bh+0x8/0x1e Sep 4 10:16:59 uriel kernel: [32571790.564767] [<eda15a8d>] ? __nf_ct_refresh_acct+0x66/0xa4 [nf_conntrack] Sep 4 10:16:59 uriel kernel: [32571790.564773] [<c103bf42>] ? _local_bh_enable_ip+0x16/0x6e Sep 4 10:16:59 uriel kernel: [32571790.564779] [<c1214593>] ? tcp_transmit_skb+0x595/0x5cc Sep 4 10:16:59 uriel kernel: [32571790.564785] [<c1005c4f>] ? xen_restore_fl_direct_end+0x0/0x1 Sep 4 10:16:59 uriel kernel: [32571790.564791] [<c12165ea>] ? tcp_write_xmit+0x7a3/0x874 Sep 4 10:16:59 uriel kernel: [32571790.564796] [<c121203a>] ? tcp_ack+0x1611/0x1802 Sep 4 10:16:59 uriel kernel: [32571790.564801] [<c10055ec>] ? xen_force_evtchn_callback+0xc/0x10 Sep 4 10:16:59 uriel kernel: [32571790.564806] [<c121392f>] ? tcp_established_options+0x1d/0x8b Sep 4 10:16:59 uriel kernel: [32571790.564811] [<c1213be4>] ? tcp_current_mss+0x38/0x53 Sep 4 10:16:59 uriel kernel: [32571790.564816] [<c1216701>] ? __tcp_push_pending_frames+0x1e/0x50 Sep 4 10:16:59 uriel kernel: [32571790.564821] [<c1212246>] ? tcp_data_snd_check+0x1b/0xd2 Sep 4 10:16:59 uriel kernel: [32571790.564825] [<c1212de3>] ? tcp_rcv_established+0x5d0/0x626 Sep 4 10:16:59 uriel kernel: [32571790.564831] [<c121902c>] ? tcp_v4_do_rcv+0x15f/0x2cf Sep 4 10:16:59 uriel kernel: [32571790.564835] [<c1219561>] ? tcp_v4_rcv+0x3c5/0x5c0 Sep 4 10:16:59 uriel kernel: [32571790.564841] [<c120197e>] ? ip_local_deliver_finish+0x10c/0x18c Sep 4 10:16:59 uriel kernel: [32571790.564846] [<c12015a4>] ? ip_rcv_finish+0x2c4/0x2d8 Sep 4 10:16:59 uriel kernel: [32571790.564852] [<c11e3b71>] ? netif_receive_skb+0x3bb/0x3d6 Sep 4 10:16:59 uriel kernel: [32571790.564864] [<ed823efc>] ? xennet_poll+0x9b8/0xafc [xen_netfront] Sep 4 10:16:59 uriel kernel: [32571790.564869] [<c11e40ee>] ? net_rx_action+0x96/0x194 Sep 4 10:16:59 uriel kernel: [32571790.564874] [<c103bd4c>] ? __do_softirq+0xaa/0x151 Sep 4 10:16:59 uriel kernel: [32571790.564878] [<c103be24>] ? do_softirq+0x31/0x3c Sep 4 10:16:59 uriel kernel: [32571790.564883] [<c103befa>] ? irq_exit+0x26/0x58 Sep 4 10:16:59 uriel kernel: [32571790.564890] [<c118ff9f>] ? xen_evtchn_do_upcall+0x12c/0x13e Sep 4 10:16:59 uriel kernel: [32571790.564896] [<c1008c3f>] ? xen_do_upcall+0x7/0xc Sep 4 10:16:59 uriel kernel: [32571790.564899] Mem-Info: Sep 4 10:16:59 uriel kernel: [32571790.564902] DMA per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564905] CPU 0: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564908] CPU 1: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564911] CPU 2: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564914] CPU 3: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564916] Normal per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564919] CPU 0: hi: 186, btch: 31 usd: 175 Sep 4 10:16:59 uriel kernel: [32571790.564922] CPU 1: hi: 186, btch: 31 usd: 165 Sep 4 10:16:59 uriel kernel: [32571790.564925] CPU 2: hi: 186, btch: 31 usd: 30 Sep 4 10:16:59 uriel kernel: [32571790.564928] CPU 3: hi: 186, btch: 31 usd: 140 Sep 4 10:16:59 uriel kernel: [32571790.564931] HighMem per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564933] CPU 0: hi: 186, btch: 31 usd: 159 Sep 4 10:16:59 uriel kernel: [32571790.564936] CPU 1: hi: 186, btch: 31 usd: 22 Sep 4 10:16:59 uriel kernel: [32571790.564939] CPU 2: hi: 186, btch: 31 usd: 24 Sep 4 10:16:59 uriel kernel: [32571790.564942] CPU 3: hi: 186, btch: 31 usd: 13 Sep 4 10:16:59 uriel kernel: [32571790.564947] active_anon:485974 inactive_anon:121138 isolated_anon:0 Sep 4 10:16:59 uriel kernel: [32571790.564948] active_file:75215 inactive_file:79510 isolated_file:0 Sep 4 10:16:59 uriel kernel: [32571790.564949] unevictable:0 dirty:516 writeback:15 unstable:0 Sep 4 10:16:59 uriel kernel: [32571790.564950] free:230770 slab_reclaimable:36661 slab_unreclaimable:21249 Sep 4 10:16:59 uriel kernel: [32571790.564952] mapped:20016 shmem:29450 pagetables:5600 bounce:0 Sep 4 10:16:59 uriel kernel: [32571790.564958] DMA free:2884kB min:72kB low:88kB high:108kB active_anon:0kB inactive_anon:0kB active_file:5692kB inactive_file:724kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15872kB mlocked:0kB dirty:8kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:5112kB slab_unreclaimable:156kB kernel_stack:56kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.564964] lowmem_reserve[]: 0 698 4143 4143 Sep 4 10:16:59 uriel kernel: [32571790.564977] Normal free:143468kB min:3344kB low:4180kB high:5016kB active_anon:56kB inactive_anon:2068kB active_file:131812kB inactive_file:131728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:715256kB mlocked:0kB dirty:156kB writeback:0kB mapped:308kB shmem:4kB slab_reclaimable:141532kB slab_unreclaimable:84840kB kernel_stack:1928kB pagetables:22400kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.564983] lowmem_reserve[]: 0 0 27559 27559 Sep 4 10:16:59 uriel kernel: [32571790.564995] HighMem free:776728kB min:512kB low:4636kB high:8760kB active_anon:1943840kB inactive_anon:482484kB active_file:163356kB inactive_file:185588kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3527556kB mlocked:0kB dirty:1900kB writeback:60kB mapped:79756kB shmem:117796kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.565001] lowmem_reserve[]: 0 0 0 0 Sep 4 10:16:59 uriel kernel: [32571790.565011] DMA: 385*4kB 16*8kB 3*16kB 9*32kB 6*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2900kB Sep 4 10:16:59 uriel kernel: [32571790.565032] Normal: 21505*4kB 6508*8kB 273*16kB 24*32kB 3*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 143412kB Sep 4 10:16:59 uriel kernel: [32571790.565054] HighMem: 949*4kB 8859*8kB 7063*16kB 6186*32kB 4631*64kB 727*128kB 6*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 776604kB Sep 4 10:16:59 uriel kernel: [32571790.565076] 198980 total pagecache pages Sep 4 10:16:59 uriel kernel: [32571790.565079] 14850 pages in swap cache Sep 4 10:16:59 uriel kernel: [32571790.565082] Swap cache stats: add 2556273, delete 2541423, find 82961339/83153719 Sep 4 10:16:59 uriel kernel: [32571790.565085] Free swap = 250592kB Sep 4 10:16:59 uriel kernel: [32571790.565087] Total swap = 385520kB Sep 4 10:16:59 uriel kernel: [32571790.575454] 1073152 pages RAM Sep 4 10:16:59 uriel kernel: [32571790.575458] 888834 pages HighMem Sep 4 10:16:59 uriel kernel: [32571790.575461] 11344 pages reserved Sep 4 10:16:59 uriel kernel: [32571790.575463] 1090481 pages shared Sep 4 10:16:59 uriel kernel: [32571790.575465] 737188 pages non-shared Now, I've no idea what this means. There's plenty of free memory; total used free shared buffers cached Mem: 4247232 3455904 791328 0 5348 736412 -/+ buffers/cache: 2714144 1533088 Swap: 385520 131004 254516 Though now I see the swap is relatively low in size, but would that matter? I've been starting to think about fragmentation, or inode usage on that large partition, but a recent fsck on it showed is as only like 0.5% fragmented. Which leaves me with inode usage, but how much of an effect really would a large inode table or filesystem TOC have? I've love to hear people's opinions on this. It's driving me potty! df -h output; Filesystem Size Used Avail Use% Mounted on /dev/xvda1 9.5G 6.6G 2.4G 74% / tmpfs 2.1G 0 2.1G 0% /lib/init/rw udev 10M 520K 9.5M 6% /dev tmpfs 2.1G 0 2.1G 0% /dev/shm /dev/xvdb 980G 921G 59G 94% /data

    Read the article

  • Membership in two domains

    - by imagodei
    Hello! I would your suggestions for an effective solution for a person, who needs to access resources in two Windows domains and wants to use one computer. It's about our CEO, who has accepted a second position in another company. Accessing files and folders isn't big problem. The greatest challenge I see is that he wants to conveniently access Exchange accounts in both companies; he would like to send and receive mail in single Outlook if possible (two profiles?) There is also a challenge with calendars: he would like to have one calendar for all activities from both Exchange accounts. Creating a POP3 account for accessing second Exchange server is a last resort, because obviously there is a problem with scheduling meetings and other calendar related tasks. Forwarding and receiving all mail/tasks on primary Exchange server is inconvenient because simple replying to original sender is disabled; and also when manually changing the recepient, he will receive mail from the wrong address. We were considering Virtualisation, that is setting up an instance of virtual machine inside existing installation and then joining this virtual computer to a second domain. Then installing another MS Outlook. This would of course mean two different Outlook accounts, two different calendars, but would at least enable our CEO to access all information from a single laptop. Does anyone have any other idea? I know setting up two domains on a single computer is a no-go (without much hacking at least), but effective workarounds are appreciate. The thing I am looking here is high usage/efficiency/productivity, but also as elegant solution from the administration point of view. Thank you very much (if you managed to read this through, this is a good sign ^_^ )

    Read the article

  • What is the sysadmin's dream network printer? 6-8k pg/mo. Xerox, OkiData, Lexmark and HP are all fail

    - by Jacob
    How do I find out what printer brand and/or type doesn't suck? This information is hard to find and manufacturer's websites won't reveal any issues with certain printers. After 10 years of dealing with network shared printers, I can't say that I have been impressed with any of the printer brands I've seen. Brother's little laser MFPs have been close to ideal for low volume, but that is it, period. OkiData, Lexmark, HP, Xerox solid ink printers, they all sucked in one way or another. Currently I'm looking to replace a Xerox ColorQube 8570 because it fails to print on a regular basis. Sometimes it doesn't even boot VxWorks fully - it just hangs at 2% or whatever. I've used Xerox 8860MFPs and they sucked just as bad. I won't talk about ink jets here, that's most likely not what I'm looking for. We currently spend about $4k on paper and ink per year for this printer at up to 6-8k pages per month, letter, mostly black and white, low color usage. I want the printer to feed paper correctly, not crash and burn when a PDF isn't according to its taste (my favorite Xerox problem here) and with decent drivers for Windows and OS X. Print quality is not of the utmost importance but paper does get sent to customers.

    Read the article

  • DRBD setup problem

    - by cuthieu
    I'm so new to DRBD, please help me fixing the problem below. Enclosed my drbd.conf. Many thanks [root@skonkwerks1 ~]# drbdadm create-md all open(/dev/hdb3) failed: No such file or directory Command 'drbdmeta /dev/drbd0 v08 /dev/hdb3 internal create-md' terminated with exit code 20 drbdsetup exited with code 20 [root@skonkwerks1 ~]# vi /etc/drbd.conf global { usage-count no; } resource repdata { protocol C; startup { wfc-timeout 0; degr-wfc-timeout 120; } disk { on-io-error detach; } # or panic # net { cram-hmac-alg "hdd1"; shared-secret "testing"; } syncer { rate 10M; } on skonkwerks1 { device /dev/drbd0; disk /dev/hdb1; address 172.29.156.1:7788; meta-disk internal; } on skonkwerks2 { device /dev/drbd0; disk /dev/hdb1; address 172.29.156.2:7788; meta-disk internal; } }

    Read the article

  • big cpu load on vmware server / linux

    - by dezfafara
    Hi, I currently using a server 2.x hosting 4 virtual machines on a linux system Today, on my physical server, I saw an enormous load average: this is the "top" of the server, illustrating my 4 virtual guests. top - 11:02:02 up 194 days, 23:09, 5 users, load average: 18.78, 12.05, 13.55 Tasks: 113 total, 4 running, 109 sleeping, 0 stopped, 0 zombie Cpu0 : 71.6%us, 19.0%sy, 0.0%ni, 8.8%id, 0.0%wa, 0.3%hi, 0.3%si, 0.0%st Cpu1 : 74.3%us, 10.4%sy, 0.0%ni, 15.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 72.5%us, 17.6%sy, 0.0%ni, 9.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 79.5%us, 4.6%sy, 0.0%ni, 16.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8178884k total, 8129980k used, 48904k free, 134904k buffers Swap: 10490436k total, 148k used, 10490288k free, 6129728k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7312 root 6 -10 1149m 921m 559m R 97 11.5 107947:09 vmware-vmx 6995 root 6 -10 779m 687m 317m R 92 8.6 107374:31 vmware-vmx 6693 root 6 -10 880m 659m 409m S 85 8.3 76947:33 vmware-vmx 12937 root 6 -10 960m 719m 523m S 75 9.0 67219:49 vmware-vmx In bold are the cpu usage for my 4 virtuals guests These guests are running on a linux system, and the appropriate process are usually 5% - 15% of cpu I don't understang why , since a few days I have this big problem. This is the "top" on a virtual guest which is at 95% of cpu load top - 11:23:15 up 194 days, 23:13, 4 users, load average: 0.25, 0.47, 0.59 Tasks: 92 total, 2 running, 90 sleeping, 0 stopped, 0 zombie Cpu(s): 1.4%us, 7.7%sy, 0.0%ni, 90.5%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 382296k total, 369732k used, 12564k free, 145156k buffers Swap: 979924k total, 13956k used, 965968k free, 86988k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3691 root 20 0 23948 1148 960 S 13.0 0.3 15339:23 vmware-guestd 3840 root 20 0 19880 584 512 S 7.7 0.2 1729:17 hald-addon-stor This virtual guest state is ok ... If anyone has any ideas .. Thanks

    Read the article

  • Knowledge and user generated content management system to track files, research, proposals, etc.?

    - by Eshwar
    I'll try keep it short. Here's the scenario: We have employees all over the world performing similar work i.e. research, generating powerpoint slides, word documents, graphics, etc. Many times a lot of this previous work can be reused for another future project. The current arrangement is email and phone calls which as you would agree is quick if you know where to look but otherwise archaic and very very inefficient. So I am looking for software that will allow me to do the following: Tag files e.g. an investor presentation on cellphone usage in kenya would be tagged investor, cellphone, kenya Manage references e.g. if we read something on the internet, should be able to paste that link in some fashion and tag it as above. Preferably cloud based so that it can be accessed by anybody and additionally would be nice (though NOT must) to have access levels (director, manager, everyone) A nice interface that non technically savvy folks can warm up to ;) A desktop app would be handy so that people don't always have to click upload or something A tree based system is inefficient in this case because content is usually linked across branches and also people might not quite agree on one format of a tree. Tagging works around this very nicely. What I have considered so far: Evernote (for its more professional look) Springpad (for its versatility with content) Mendeley (this is a research manager and in some ways ideal, but i fear its limited to PDFs) The goal is that when somebody wants to look for a document, they don't have to ask a colleague, they can just search with keywords and all relevant information shows up. Thanks!

    Read the article

  • heavy load on mysql

    - by payal
    i have dedicated server with very good configuation like 16 gb ram etc but i am facing heavy load from mysql however only one database is running and 5-10 pages are only running. However whm load is always less than one but when i click on whm load it shows 20% of cpu usage by mysql and after some time it starts saying can not connect to mysql . mysql server has gone away 1691 (Trace) (Kill) mysql 0 19.2 2.7 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --log- error=/var/lib/mysql/server.xyz.com.err --pid-file=/var/lib/mysql/server.xyz.com.pid i have tested static pages they are coming blezing fast but all dynamic pages which are using mysql is coming damn slow it takes years to open.. ihave checked log error file it says nothing.i have increased maximum connnection also to 1000 but still same problem is there .if i disconnect that one databasejust by changing the name of database i can see withing half hour the load of server and mysql goes down to negliglble .i have tested everything and if there are some query which can cause heavy load to server can you please list which type of query can cause heavy load on server then also for 5-10 pages it will never cause that much heavy load. i have seen server with 500 websites but was working just fine.

    Read the article

  • heavy load on mysql

    - by payal
    i have dedicated server with very good configuation like 16 gb ram etc but i am facing heavy load from mysql i am running a music wesbite however only one database is running and 5-10 pages are only running.when i click on whm show processlist it shows only 2-3 processes However whm load is always less than one but when i click on whm load it shows 20% of cpu usage by mysql and after some time it starts saying can not connect to mysql . mysql server has gone away 1691 (Trace) (Kill) mysql 0 19.2 2.7 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --log- error=/var/lib/mysql/server.xyz.com.err --pid-file=/var/lib/mysql/server.xyz.com.pid i have tested static pages they are coming blezing fast but all dynamic pages which are using mysql is coming damn slow it takes years to open.. my.conf file is [mysqld] key_buffer = 1536M max_allowed_packet = 1M max_connections = 250 max_user_connections = 15 wait_timeout=40 connect_timeout=10 table_cache = 512 sort_buffer_size = 2M read_buffer_size = 2M read_rnd_buffer_size = 8M myisam_sort_buffer_size = 64M thread_cache_size = 8 query_cache_size = 32M server-id = 14 old-passwords = 1 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash [myisamchk] key_buffer = 256M sort_buffer_size = 256M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout ihave checked log error file it says nothing.i have increased maximum connnection also to 1000 but still same problem is there .if i disconnect that one databasejust by changing the name of database i can see withing half hour the load of server and mysql goes down to negliglble .i have tested everything and if there are some query which can cause heavy load to server can you please list which type of query can cause heavy load on server then also for 5-10 pages it will never cause that much heavy load. i have seen server with 500 websites but was working just fine.

    Read the article

  • ESXi 5 Guests will not boot

    - by Adrian
    I have a problem with Guests not booting under VMWare ESXi 5.0 on my IBM x3550M3 server. Note: Investigation eventually determined that problem was with the VMware client on a Lenovo Edge laptop, the only Windows box available in a Linux IT shop. vSphere Client v4 and v5 duplicated behavior on the Lenovo Edge. As indicated in the comment to the accepted answer, replacing the workstation with one using different video was the "fix" for this particular issue. The ESXi host boots just fine. The Client connects just fine. Guests can be configured but do not successfully boot. The initial guest memory consumption jumps up to 560MB and drops down to 40MB after a few seconds. Initial CPU usage is 1 full CPU (3000Ghz per the chart) and immediately drops downm to 29Mhz. Guests do not display any output in the Console tab but show a state of 'Powered On'. No errors in the Events tab. Switching Guest from BIOS to EFI makes no difference. VMs are listed as Version 7 and the behavior is duplicated across all availabled Guest OS flavors. Problem also duplicated when server is booted up in Legacy Only mode. Logs do not contain anything particularly suspicious. Edit: No firewalls, routers, or VLANs in between the client and server. Edit 2: We have tried to Boot Guest into BIOS screen at Next Boot checkbox in the Guest Setting. Was not successful. Edit 3: 500GB datastore with 1 40GB VM on it. Plenty of space. Edit 4: Guests copied from my old ESXi 4 server DO NOT boot on the ESXi 5 system. Initially it complains about too little Video RAM being configured for the default 2500x1600, but it still doesn't work properly even after I bump the Video RAM settings or switch it to Auto-Detect.

    Read the article

  • Nginx + PHP-FPM Too Many Resources

    - by user3393046
    My Server has the following Specs CPU: 6 Cores Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz RAM: 32 GB I have a problem with nginx+php-fpm. They are taking too many resources for an unknown reason. Even if i restart the nginx + php-fpm the start up processes will use many resources. My nginx Config is the following: user nginx; worker_processes auto; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; worker_rlimit_nofile 300000; events { worker_connections 6000; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 65; #gzip on; include /etc/nginx/conf.d/*.conf; } My php-fpm pool config is the following [www] user = nginx group = nginx listen = /var/run/php5-fpm.sock listen.owner = nginx listen.group = nginx listen.allowed_clients = 127.0.0.1 pm = ondemand pm.max_children = 1500; pm.process_idle_timeout = 5; chdir = / security.limit_extensions = .php I'm using on pm.ondemand since my website has to support many concurrent connections at the same time and i was unable to to it with dynamic/static. I guess this isnt the problem because as i said earlier when i restart nginx+php-fpm at the same time, they are taking too much resources without any request. Here is the screenshot with the CPU Usage http://s28.postimg.org/v54q25zod/Untitled.png

    Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >