Search Results

Search found 47336 results on 1894 pages for 'version control cheat she'.

Page 488/1894 | < Previous Page | 484 485 486 487 488 489 490 491 492 493 494 495  | Next Page >

• CUDA driver installation on a laptop with nVidia NVS140M card

  - by stanigator

  I'm trying to first figure out if my computer contains a CUDA-enabled card. It has an nVidia NVS 140M card, but I can't seem to figure out if it is the 128 MB version or 256 MB version. On the laptop purchase receipt, I found out that I ordered the 128 MB version, but the control panel description of the card said otherwise as shown below: When I ran the CUDA driver from nVidia's site, it cannot find a hardware compatible with CUDA (even though the product series is CUDA-enabled, the card does not have 256 MB minimum of memory to do so). What would be your recommendations in this case with trying to use CUDA on this computer (I'm not sure if nothing can be done at this point)? Thanks in advance.

  Read the article

• Python pattern search in a string

  - by Hulk

  In python if a string contains the following, print valid_str The output of this is Record is positive in tone: It emphasizes "what a child can do and his or her achievements, as opposed to what he or she cannot do," explains the It is useful for progress and achievements during office conferences How to search for the pattern It is useful in the above string and if not found return something. Thanks..

  Read the article

• Win7 - Chrome: Accelerated rasterization not enabled/not supported

  - by Wozzie

  Win 7 Pro SP1 x64 EVGA Geforce GTX 670 FTW 2gb Geforce Driver: 320.49, it did happen with the previous version of the driver as well Chrome Version 28.0.1500.52 beta-m DirectX: 11 I was looking in chrome://gpu which told me that "Rasterization: Software only. Hardware acceleration disabled." and further down "Accelerated rasterization has not been enabled or is not supported by the current system." Is there a way to enable hardware acceleration?

  Read the article

• Radio buttons being reset in FF on cache-refresh

  - by Andrew Song

  (This is technically an addendum to an earlier StackOverflow question I had posted, but my original post asked a different question which doesn't really cover this topic -- I don't want to edit my older question as I feel this is different enough to merit its own page) While browsing my website in Firefox 3.5 (and only FF3.5), I come across a page with two radio buttons that have the following HTML code: <input id="check1" type="radio" value="True" name="check" checked="checked"/> <input id="check2" type="radio" value="False" name="check"/> This page renders as expected, with 'check1' checked and 'check2' unchecked. When I then go to refresh the page by pressing Control + R, the two radio buttons render, but they are both unchecked even though the raw HTML code is the same (as above). If I do a cache-miss refresh (via Control + F5 or Control + Shift + R), the page returns back to the way you'd expect it. This is not a problem in any other browser I've tried except FF3.5. What is causing these radio buttons to be reset on a normal refresh? How can I avoid this?

  Read the article

• Preprocess strings file during Xcode build

  - by stigi

  Hello, I know there's a way to preprocess my info.plist file, but is there a similar way to process strings files inside my Settings.bundle? My problem: I have an iPhone app and I want the the user to know about the currently installed version. I do this by displaying it in the apps settings. Now every time i change the bundle version in my info.plist i also have to change the version in the Root.strings in the Settings.bundle. I could run a script action that updates it, but it would be nice to use the preprocessor since I could do even more fun things with it. Thanks!

  Read the article

• Gizmo5 mobile with wifi and callin number

  - by Mark

  I want to buy a Nokia 5530 and run Gizmo5 on it in order to receive and make calls. I want to get a call in number based in England and was wondering if receiving calls via the call in number on my mobile via wifi would use any of my callout credit? I ask because the Skype lite version uses your callout credit if you receive a call on it using your online number (it doesn't if you use the desktop version). Thanks!

  Read the article

• Conditional execution of EventTriggers in Silverlight 3

  - by Jason

  I'm currently working on the UI of a Silverlight application and need to be able to change the visual state of a control to one of two possible states based on it's current state when handling the same event trigger. For example: I have a control that sits partially in a clipping path, when I click the visible part of the control I want to change the state to "visible" and if I click it again when it is in its "visible" state I want to change to the "hidden" state. Example XAML: <i:Interaction.Triggers> <i:EventTrigger EventName="MouseLeftButtonUp"> <ic:GoToStateAction StateName="Visible"/> <ic:GoToStateAction StateName="Hidden"/> </i:EventTrigger> </i:Interaction.Triggers> Where "i" is "System.Windows.Interactivity;assembly=System.Windows.Interactivity" and "ic" is "Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions". I'm currently working in Expression Blend 3 and would prefer to have a XAML only solution but am not opposed to coding this if it is completely necessary. I have tried recording a change in the target state name in Blend but this did not work. Any thoughts on this?

  Read the article

• ScriptManager duplicates javascript

  - by Andreas

  Hi! I have a usercontrol that can be used in for example a gridview itemtemplate, this means that the control might or might not be on the page at page load. In the case where the control is inside an itemtemplate i will popupate the gridview via asyncronous postbacks (via updatepanels). The control itselfs registrers scriptblocks since it is depending on javascripts. First i used Page.ClientScript.RegistrerClientScriptBlock But this doesn't work on asyncronous postbacks (updatepanels) so i then tried the same using ScriptManager which allows me to registrer scripts on the page after async postbacks. great!. ScriptManager.RegisterClientScriptBlock However, ScriptManager (what i know of) does not have the functionallity to see if a script already is on the page, so i will for every postback generate duplicates of the script blocks, this is ofcourse unwanted behaviour. I did a run at Google and found that i can call the Dispose() method of the PageRequestManager can be used, this does work since it clears the scripts and then adding them again (this also solves my issue with removing unused script blocks from removed controls). Sys.WebForms.PageRequestManager.getInstance().Dispose() However, ofcourse there is a downside since im posting here :). The Dispose() method disposes the instance on the master page as well which leads to scripts running there will stop to function after an async postback (updateprogress for example). So, is there a way to check if a script already exists on the page using ScriptManager or any other tools, that will prevent me of inserting duplicate scripts? Also, is there a way to remove certain script blocks (when i am removing an item in itemtemplate for example). Big thanks in advance.

  Read the article

• Solaris SPARC 10 32bit mode

  - by TM.

  I'm looking for a definitive answer, does Solaris 10 running on a SPARC machine support booting into 32bit mode? I've found one site that states Solaris 8 was the last version that supported booting in a 32bit mode for SPARC. I've read multiple items that explain how to boot Solaris into 32bit mode, however they did not list the Solaris version. We've tried all the ways specified, but the system keeps booting into 64bit mode.

  Read the article

• insert into several inheritance tables with OUTPUT - sql servr 2005

  - by csetzkorn

  Hi, I have a bunch of items – for simplicity reasons – a flat table with unique names seeded via bulk insert: create table #items ( ItemName NVARCHAR(255) ) The database has this structure: create table Statements ( Id INT IDENTITY NOT NULL, Version INT not null, FurtherDetails varchar(max) null, ProposalDateTime DATETIME null, UpdateDateTime DATETIME null, ProposerFk INT null, UpdaterFk INT null, primary key (Id) ) create table Item ( StatementFk INT not null, ItemName NVARCHAR(255) null, primary key (StatementFk) ) Here Item is a child of Statement (inheritance). I would like to insert items in #items using a set based approach (avoiding triggers and loops). Can this be achieved with OUTPUT in my scenario. A ‘loop based’ approach is just too slow where I use something like this: insert into Statements (Version, FurtherDetails, ProposalDateTime, UpdateDateTime, ProposerFk, UpdaterFk) VALUES (1, null, getdate(), getdate(), @user_id, @user_id) etc. This is a start for the OUTPUT based approach – but I am not sure whether this would work in my case as ItemName is only inserted into Item: insert into Statements ( Version, FurtherDetails, ProposalDateTime, UpdateDateTime, ProposerFk, UpdaterFk ) output inserted.Id ... ??? Thanks. Best wishes, Christian

  Read the article

• How to List Some Table Records in Windows Application? - C#.NET

  - by user327387

  Which control should i use? I don't want the records to be displayed on the Windows Application list in the same way records displayed in database as this: I want the records to be displayed statically and a user when right click a record, he/she gets Edit and Remove choices. Of course there has to be static headers at the top. I hope my request is clear. I'm using C#.NET - VS 2008

  Read the article

• Changing the user language in an asp.net application based on user choice

  - by Nadeem

  I have web application which supports globalization. So i need to provide user a choice to select a language one he/she logs in. Now the problem is where do i have to make changes to set the user's preferred language.

  Read the article

• Project 2003 SP2 failing to install SP3

  - by Unsliced

  I have Microsoft Project Professional 2003 installed (11.2.2005.1801.15, SP2). I have been trying to open a MPP file created in a newer version so need the converter, which is part of SP3. But when I try to install the SP3 package (as downloaded from Microsoft's site) I get an error message box: --------------------------- Project 2003 Service Pack 3 (SP3) --------------------------- The expected version of the product was not found on your system. --------------------------- OK --------------------------- Project (and Office) are licensed and otherwise work correctly. Any advice?

  Read the article

• Subdomains, folders, internationalization, and hosting solutions

  - by justinbach

  I'm a web developer and I recently landed a gig to develop the US / international version of a site for a company that's big in Europe but hasn't done much expansion into the US yet. They've got an existing site at company.com, which should remain visible to European customers after the new site goes up, and an existing (not great) site at company.us, which I'm going to be redeveloping (the .us site will be taken down when my version goes up--keep reading for details). My solution needs to take into account the fact that there are going to be new, localized versions of the site in the fairly near future, so the framework I'm writing needs to be able to handle localizations fairly easily (dynamically load language packs, etc). The tricky thing is the European branch of the company manages the .com site hosting (IIS-based) and the DNS, while I'll be managing the US hosting (and future localizations), which will likely be apache-based. I've never been a big fan of the ".us" TLD--I think most US users are accustomed to visiting the .com--so the thought is that the European branch will detect the IP of inbound traffic and redirect all US-based addresses to us.example.com (or whatever the appropriate localized subdomain might be), which would point to the IP address of my host. I'd then serve the appropriate locale-specific content by pulling the subdomain from the $_SERVER superglobal (assuming PHP). I couldn't find any examples of international organizations that take a subdomain-based approach for localization, but I'm not sure I have any other options as a result of the unique hosting structure here (in that there's not a unified hosting solution for the European and US sites). In my experience, the US version of an international site would live at domain.com/us, not at us.domain.com, and I'd imagine that this has to do with SEO (subdomains are treated as separate sites, so improved rankings for the US site wouldn't help the Canadian version if subdomains are used to differentiate between them). My question is: is there a better approach to solving this problem than the one I'm taking? Ideally, I'd like to use a folder-based approach (see adidas.com as an example of what I'm talking about), but I'm not sure that's a possibility given that the US site (and other localizations) will not be hosted on the same server as the rest of the .com. Can you, in IIS, map a folder (e.g. domain.com/us) to a different IP address? What would you recommend? Thanks for your consideration.

  Read the article

• What information do you capture your software crashes in the field?

  - by Russ

  I am working on rewriting my unexpected error handling process, and I would like to ask the community: What information do you capture both automatic, and manually, when software you have written crashes? Right now, I capture a few items, some of which are: Automatic: Name of app that crashed Version of app that crashed Stack trace Operating System version RAM used by the application Number of processors Screen shot: (Only on non-public applications) User name and contact information (from Active Directory) Manual: What context is the user in (i.e.: what company, tech support call number, RA number, etc...) When did the user expect to happen? (Typical response: "Not to crash”) Steps to reproduce. What other bits of information do you capture that helps you discover the true cause of an applications problem, especially given that most users simply mash the keyboard when asked to tell you what happened. For the record I’m using C#, WPF and .NET version 4, but I don’t necessarily want to limit myself to those. Related: http://stackoverflow.com/questions/1226671/what-to-collect-information-when-software-crashes Related: http://stackoverflow.com/questions/701596/what-should-be-included-in-the-state-of-the-art-error-and-exception-handling-stra

  Read the article

• Firefox Add-On for closing multiple tabs except some

  - by Chris

  I'm looking for a Firefox addon, compatible with the latest version, which closes all tabs, except some which I can select. So, if I have 40 Open Tabs, and I want to keep only 3 open, this addon should be able to close the other 37. Such an addon is: https://addons.mozilla.org/en-US/firefox/addon/close-multiple-tabs/ Unfortunately, this version is not compatible with Firefox 13. Do you know an alternative?

  Read the article

• How to display a busy message over a wpf screen

  - by dave

  Hey, I have a WPF application based on Prism4. When performing slow operations, I want to show a busy screen. I will have a large number of screens, so I'm trying to build a single solution into the framework rather than adding the busy indicator to each screen. These long running operations run in a background thread. This allows the UI to be updated (good) but does not stop the user from using the UI (bad). What I'd like to do is overlay a control with a spinning dial sort of thing and have that control cover the entire screen (the old HTML trick with DIVs). When the app is busy, the control would display thus block any further interaction as well as showing the spinny thing. To set this up, I thought I could just have my app screen in a canvas along with the spinny thing (with a greater ZIndex) then just make the spinny thing visible as required. This, however, is getting hard. Canvases do not seem well set up for this and I think I might be barking up the wrong tree. I would appreciate any help. Thanks.

  Read the article

• Sizing issues while adding a .Net UserControl to a TabPage

  - by TJ_Fischer

  I have a complex Windows Forms GUI program that has a lot of automated control generation and manipulation. One thing that I need to be able to do is add a custom UserControl to a newly instatiated TabPage. However, when my code does this I get automatic resizing events that cause the formatting to get ugly. Without detailing all of the different Containers that could possibly be involved, the basic issue is this: At a certain point in the code I create a new tab page: TabPage tempTabPage = new TabPage("A New Tab Page"); Then I set it to a certain size that I want it to maintain: tempTabPage.Width = 1008; tempTabPage.Height = 621; Then I add it to a TabControl: tabControl.TabPages.Add(tempTabPage); Then I create a user control that I want to appear in the newly added TabPage: CustomView customView = new CustomView("A new custom control"); Here is where the problem comes in. At this point both the tempTabPage and the customView are the same size with no padding or margin and they are the size I want them to be. I now try to add this new custom UserControl to the tab page like this: tempTabPage.Controls.Add(customView); When making this call the customView and it's children controls get resized to be larger and so parts of the customView are hidden. Can anyone give me any direction on what to look for or what could be causing this kind of issue? Thanks ahead of time.

  Read the article

• How to search in this activerecord example?

  - by Horace Ho

  Two models: Invoice :invoice_num string :date datetime . . :disclaimer_num integer (foreign key) Disclaimer :disclaimer_num integer :version integer :body text For each disclaimer there are multiple versions and will be kept in database. This is how I write the search (simplified): scope = Invoice.scoped({ :joins => [:disclaimer] }) scope = scope.scoped :conditions => ["Invoice.invoice_num = ?", "#{params[:num]}"] scope = scope.scoped :conditions => ["Disclaimer.body LIKE ?", "%#{params[:text]}%"] However, the above search will search again all versions of the disclaimer. How can I limit the search to only the last disclaimer (i.e. the version integer is the maximum). Please note: Invoice does not keep the version number. New disclaimers will be added to disclaimer table and keep old versions.

  Read the article

• How can I clear viewstate of a dropdownlist inside a usercontrol? Should I?

  - by tbilly

  I have a web user control with a dropdownlist inside of it. When the usercontrol's databind event is called, it automatically fires the dropdownlists databind event. In the dropdownlist's ondatabound event handler an 'other' option is appended to the end of the dropdownlist. The usercontrol is loaded multiple times, depending on selection of other controls on the page. When the page loads initially, there are no items in the usercontrol except the 'other' option. Then when I call the user control's databind event the control reloads, with 4 items plus the 'other' option. The text for the first item in the list is the 'other' option's text, not what it should be. I've stepped through the databound event of the dropdownlist and have found that all items are loading correctly. It appears that the dropdownlist's viewstate is the culprit, that the dropdownlist's original item[1] text is overwriting the new text. I've tried disabling viewstate on the dropdownlist, but then it wouldn't load at all. Should I try to clear the dropdownlist's viewstate? How do I do that? Any suggestions would be greatly appreciated.

  Read the article

• Struts 2 discard cache header

  - by Dewfy

  I have strange discarding behavior of struts2 while setting cache option for my image. I'm trying to put image from db to be cached on client side To render image I use ( http://struts.apache.org/2.x/docs/how-can-we-display-dynamic-or-static-images-that-can-be-provided-as-an-array-of-bytes.html ) where special result type render as follow: public void execute(ActionInvocation invocation) throws Exception { ...//some preparation HttpServletResponse response = ServletActionContext.getResponse(); HttpServletRequest request = ServletActionContext.getRequest(); ServletOutputStream os = response.getOutputStream(); try { byte[] imageBytes = action.getImage(); response.setContentType("image/gif"); response.setContentLength(imageBytes.length); //I want cache up to 10 min Date future = new Date(((new Date()).getTime() + 1000 * 10*60l)); ; response.addDateHeader("Expires", future.getTime()); response.setHeader("Cache-Control", "max-age=" + 10*60 + ""); response.addHeader("cache-Control", "public"); response.setHeader("ETag", request.getRequestURI()); os.write(imageBytes); } catch(Exception e) { response.sendError(HttpServletResponse.SC_NOT_FOUND); } os.flush(); os.close(); } But when image is embedded to page it is always reloaded (Firebug shows code 200), and neither Expires, nor max-age are presented in header Host localhost:9090 Accept image/png,image/*;q=0.8,*/*;q=0.5 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 300 Connection keep-alive Referer http://localhost:9090/web/result?matchId=1 Cookie JSESSIONID=4156BEED69CAB0B84D950932AB9EA1AC; If-None-Match /web/_srv/teamcolor Cache-Control max-age=0 I have no idea why it is dissapered, may be problem in url? It is forms with parameter: http://localhost:9090/web/_srv/teamcolor?loginId=3

  Read the article

• How to find out where a thread lock happend?

  - by SchlaWiener

  One of our company's Windows Forms application had a strange problem for several month. The app worked very reliable for most of our customers but on some PC's (mostly with a wireless lan connection) the app sometimes just didn't respond anymore. (You click on the UI and windows ask you to wait or kill the app). I wasn't able to track down the problem for a long time but now I figured out what happend. The app had this line of code // don't blame me for this. Wasn't my code :D Control.CheckForIllegalCrossThreadCalls = false and used some background threads to modify the controls. No I found a way to reproduce the application stopping responding bug on my dev machine and tracked it down to a line where I actually used Invoke() to run a task in the main thread. Me.Invoke(MyDelegate, arg1, arg2) Obviously there was a thread lock somewhere. After removing the Control.CheckForIllegalCrossThreadCalls = false statement and refactoring the whole programm to use Invoke() if modifying a control from a background thread, the problem is (hopefully) gone. However, I am wondering if there is a way to find such bugs without debugging every line of code (Even if I break into debugger after the app stops responding I can't tell what happend last, because the IDE didn't jump to the Invoke() statement) In other words: If my apps hangs how can I figure out which line of code has been executed last? Maybe even on the customers PC. I know VS2010 offers some backwards debugging feature, maybe that would be a solution, but currently I am using VS2008.

  Read the article

• Building Boost with LSB C++ Compiler

  - by Alex Farber

  I want to build my program with LSB C++ Compiler from the Linux Standard Base http://www.linuxfoundation.org/collaborate/workgroups/lsb. Program depends on the Boost library, built with gcc 4.4 version. Compilation fails. Is it possible to build the Boost library with LSB C++ Compiler? Alternatively, is it possible to build the Boost library with some old gcc version, what version is recommended? My final goal is to get my executable and third-party Boost libraries running on most Linux distributions. Generally, what can be done to get better binary compatibility for Linux distributions, developing C++ closed-source application depending on the Boost library?

  Read the article

• Releasing WinForm Program Updates

  - by Tinkerer_CardTracker

  Hello, Another quick question. I'd like to release some updates for a WinForm program, but to date I have simply released an all-new compile. People have to un-install the old version and install the new version. I bet there's a way to get around this, but I don't know what it's called. As you may guess, searches for "updates" "new version" "install" and the other obvious things I've tried have generated an impressive number of irrelevant results. _< I suspect this process has a particular name, which should point me in the right direction, but if it doesn't please link to a tutorial or something. Thanks again, this site is great! :)

  Read the article

• How to design a command line program reusable for a future development of a GUI?

  - by systempuntoout

  What are some best practices to keep in mind when developing a script program that could be integrated with a GUI, probably by somebody else, in the future? Possible scenario: i develop a fancy python CLI program that scrapes every unicorn images from the web i decide to publish it on github a unicorn fan programmer decides to take the sources and build a GUI on them. he\she gives up because my code is not reusable How do i avoid step four and let unicorn fan programmer build his\her GUI without hassle?

  Read the article

< Previous Page | 484 485 486 487 488 489 490 491 492 493 494 495  | Next Page >