Search Results

Search found 2066 results on 83 pages for 'cable'.

Page 49/83 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • DVI-D connection does not display properly at higher resolutions (2560 x 1440)

    - by Cromulent
    I have two computers connected to a Dell U2711 monitor. A PC which is connected using DisplayPort and a Mac connected using DVI-D. The PC displays 2560 x 1440 resolutions perfectly but when I try and set that resolution on the Mac it displays in an extremely fuzzy manner. So fuzzy in fact that I can hardly read the text on the screen. I've tried the Mac out connected via DisplayPort (unfortunately the monitor only has one DisplayPort connection) and it worked perfectly. I also had it connected via DVI-D in the past and it worked then. For some reason it just does not work anymore. I was wondering if this problem might be caused by a dodgy cable or perhaps not having the correct one. Can anyone think of what the issue might be? I've checked out the DVI-D spec and it should be able to display resolutions of 2560 x 1440 correctly.

    Read the article

  • External Hardrive Not Reconized on Windows 7 at all

    - by Bella
    I Have a NextStar 2/5" from Vantec and its an 80G HD. I have used it many times on windows xp and it works fine. We just recently upgraded to windows 7 home premium and when I plug it in it beeps many times. I've tried all the USB plugs in my computer and its not those plugs. Haven't tried eSata because it uses a weird cable to plug into. People told me that when it beeps everything is corrupted, but works fine on xp. I tried installing the drivers online from their website and when I try it asks me to put in a cd which makes no sense because they are online drivers. When I go into device manager nothing comes up, it just acts like the HD is invisible. The beeping will stop eventually as it is plugged in, but with no result.

    Read the article

  • All nework interfaces hang for seconds while one interface goes up/down

    - by user3698377
    I am building a client/server application that uses several network interfaces in parallel for redundancy, and I have noticed that while one network interface goes down or goes up, the communication on other interfaces hangs for several seconds. I could reproduce this behavior without my application in a simple way: there are 2 interfaces available on computer 1 ( Ethernet and WiFi ) ping from computer 2 the IP address of the Ethernet connection of computer 1 disconnect the WiFi of computer 1 ping hangs for seconds, and then the packets are traveling again between the 2 computers. The hanging happens as well if I turn back on the WiFi connection on computer 1. It happens as well if I ping the WiFi IP, and turn off/on the Ethernet connection ( or unplug/plug the cable). I am using Linux Ubuntu 12.04 on both computers. Any ideas why is this happening, and if / how can it be avoided?

    Read the article

  • Browsers ignoring hosts file

    - by madkris
    Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

    Read the article

  • How can I apply a DSP to my microphone in windows?

    - by user16315
    I'd like to be able to run my microphone through arbitrary DSP filters--Mostly for compression and amplification, but also noise cancelation would be nice. I'd then like to take that output and put it back in a virtual audio device that I could use as input for skype, mumble, teamspeak, or any other VOIP program. With a program like Virtual Audio cable, I can do the 'fake devices' part but as far as I know it does not allow any kind of filtering inline. Does a program like this exist? Or some combination of programs that can be combined to accomplish this?

    Read the article

  • How to use auto-discovery with iDRAC Enterprise?

    - by jwiz
    All I want to do is: have "auto discovery" enabled on my iDRAC enterprise at the factory rack the server, cable iDRAC to dhcp-enabled management network have the iDRAC DHCP, find the "Provisioning Server", and get updated with login credentials (for us to use with racadm, idrac webui, etc.) I don't need to do any configuring of the system, install OS, or anything else. I just want idrac to dhcp out of the box, and end up with an account that can be used to login. All the docs I can find on Dell's site refer to a "Provisioning Server", but I honestly can't tell if they have some reference product, or if they only have software that "integrates" with other vendor's existing management systems. I'd be happy to set up whatever is needed, I just can't find something that explicitly describes the process (only references to the fact that it is supported).

    Read the article

  • Creating a Network link between 2 buildings

    - by Adam
    Hey My company needs to create a network link between two buildings. Currently we have a cat5e network in one building and would like to connect some computers(about 15) in our second building to the main network in the first building. The distance between the two buildings is 30 metres. The 30 metres means going through a wall from the first building. Going through the car park and then through a wall into the other building. We can run any cables through speed ramps and so we do not need to dig up the road! Also the second building does not have an Internet connection and so we have to create some sort of cable link so that they can share our Internet connection. Ideas? Should we just run cat5e? Should we run fibre? Should we run coaxial?

    Read the article

  • Fedora14 serial console how-to needed

    - by lamba2
    Has anyone ever got a serial console working in fedora 14 ? Is it as simple as adding to grub: serial --unit=0 --speed=38400 terminal --timeout=10 serial console and add to the kernel lines: console=tty0 console=ttyS0,38400 ??? If so, this isn't working for me. I have agetty installed, and im using minicom, although i've heard you can also use "screen /dev/ttyUSB0" on the client side. The /etc/init/serial.conf file suggests it should be working, but nothing. Currently getting no joy from any of this after 2 days. Does anyone know a method that definitely works on fedora 14 ? (no /etc/event.d/ needed or such) edit: Client side im using a null modem cable and usb-serial adaptor.

    Read the article

  • How to get Virtual PC to recognize MIDI devices?

    - by bparker
    Hey all. I have an XP Pro virtual machine running inside Virtual PC 2007. My host machine is x64 Windows 7. I have a MIDI keyboard hooked up to my machine via a Turtle Beach USB to MIDI 1x1 cable. I have installed the driver and software on my host machine and ran a soundcheck, and everything appears to be working fine. Playback is sent to the MIDI device with no problems. However, when I attempt to install the driver and run a soundcheck in my XP virtual machine, the device is not found. Other USB devices (mouse, keyboard, flash drives) work fine in the virtual machine, but not they MIDI keyboard. I'm not sure what steps to take in order to troubleshoot the and get the VM to start recognizing the MIDI keyboard. Any help or suggestions would be greatly appreciated. Thanks.

    Read the article

  • Setting up D-link AP2100 as a repeater

    - by Mersan
    Hi, I have two D-Link AP2100, one is connected to a switch (with cable). The second one I would like to use as a repeater, using the WiFi connection to the first and not connected to the switch. Does anyone know first if this is possible, and second and most important, how does one do it. I have tested to set the second AP in repeater-mode, and it is connected to the first, I have full strength to the second one, but I'm not receiving any IP från the DHCP-server, so no access out. Any ideas? /Mersan

    Read the article

  • Booting from e-sata drive

    - by petersohn
    I have a HP EliteBook laptop (don't know exact product number), which has an internal hard drive with Windows installed on it. I have an external hard drive with e-sata and USB ports, linux installed on it. When I try to boot from the external drive, it works if I use USB but not if I use e-sata. In the BIOS setup, I have the following boot order set: External SATA drive USB Hard Drive Notebook Upgrade Bay Notebook Hard Drive etc. When I boot from another drive (such as the internal hard drive or from CD-ROM), and have the e-sata cable connected, it works perfectly. Is there any way to boot from the e-sata drive?

    Read the article

  • Wireless internet connection connects but internet does not work (no packets received). Wired does.

    - by Rodney
    When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

    Read the article

  • How to install audio drivers for Acer Revo nettop?

    - by CT
    I have a Acer Revo nettop. I wiped the XP Home install that came on the machine and put XP Pro on. Acer's support website would lead you to believe that this product does not exist. I know it has a NVIDIA ION LE chipset so I headed over to nvidia.com to download drivers. Ive downloaded and installed the Chipset drivers, Graphics Drivers, and HDMI audio drivers. I have no sound. Under Device Manager there is an unknown Audio Device on High Definition Audio Bus. I do not have an HDMI cable to test hdmi audio. I would just like the standard audio mini-jack output to work. Anyone know of the correct driver or a generic driver that would work? Thanks

    Read the article

  • Most efficient way to use a laptop like a desktop? [closed]

    - by user74757
    When I'm at home (which is the vast majority of the time now in Summer), I rarely use my laptop away from my desk. When it is at the desk, I plug in a monitor through HDMI, a power cable, and a mouse and keyboard that always stay there. I was wondering if anyone had any recommendations as to a good dock or product that does a good job of transforming a laptop into a true "desktop replacement." Ideally, it would allow all the connections to remain in place, with minimal effort to take the laptop in and out of the fixture. Thanks for any suggestions!

    Read the article

  • Radeon 5850 Why am I not getting 3 monitors up as a choice ??

    - by Jan
    Ive just bought the top end ATI Radeon card with 2 normal monitor ports and a HDMI. The idea was to continue using my dual screen setup as always and to use the last plug, the HDMI on my TV. I got a new 52 inch HD TV with all the necessary bits. This should work fine. But.. in Display Properties I still get only my 2 monitors up as options. Not the Digital TV. When I unplug 1 monitor and restart the computer, I get the TV and the other monitor. But never all 3 at the same time. Why is this ? Where can I go to tell it that I need all 3 screens at the same time. Also I get a message saying my gfx card also gives sound through the HDMI cable.. But the TV tells me its recieving a sound format that it does not understand. Any ideas on that too while were at it ?

    Read the article

  • How do I replace the screen of a Dell Inspiron 1545?

    - by Ajus10
    I got a new screen for a Dell Inspiron 1545. The old screen says Dell Inspiron 1545 LP156WH1 (TL)(C1?) HD and the new one says Dell Inspiron 1545 LP156WH1 (TL)(C1?) LCD Does that make a difference? All I can get to work on the new screen is the backlight. The old screen had a crack. Now when I plug the old one in, it will not turn on at all. Could I have blown the inverter or messed up the cable?

    Read the article

  • Compaq Presario CQ40 unexpected turn off

    - by CRoshanLG
    My Compaq Presario CQ40 (yeah, its pretty old) suddenly turns off after about 1/2 - 1 hour usage without any notice or warning. The power cable and adapter works fine (indicator bulbs show that power is given to the laptop), but it seems like machine suddenly plugged off from the power source. And when I try to switch it on, after the sudden turn off it simply won't turn on. I can only turn it on after letting it to rest for at least couple of hours! ** The battery has been dead for some time now, but it has been working fine on direct power supply until recently. Has anyone encountered this? and hopefully knows any cure?

    Read the article

  • Can SATA be used to connect computers?

    - by André
    Can SATA be used to connect two computers together, just like a crossover Ethernet cable would do ? I know SATA has no "networking" features and even though a controller may have multiple ports, the drives don't "see" each other, and that in SATA one device acts as the host (the computer) and the other device is some kind of "client" (the storage drive). But still, did anyone attempt to make a kernel module that would make one computer appear as a "client" (so that the host's SATA controller detects it as a standard hard drive) and then set up like a pseudo-Ethernet link or a very high speed serial link (and then run pppd on it and do networking) ? Note : I know this is an unprofessional and totally stupid idea, I'm just asking out of curiosity.

    Read the article

  • Why does changing the physical socket on your router cause delays?

    - by Josh Browning
    My question involves the delays involved with changing which physical socket your ethernet cable is connected to. I am aware that if you are connected to a router on a network and then change which physical socket on that router you are using you will gain very small additional delays initially. However I am curious as to what causes these delays. I originally thought it was to do with the infromation stored in the routing table and whether that was allocated to a specific socket on the router or not. Although, if your IP address is the same then I don't understand why there would be delays because I would of assumed that any information within the router was linked to an IP address rather than a physical socket.

    Read the article

  • Server room kit?

    - by Bill Weiss
    I feel like this is a question I've seen on here before, but some searching didn't do me any good. This looks similar, but I'm looking for stuff I leave there, not what's in my go-bag. What would you say is indispensable equipment in your server room? I've inherited one that's a bit light on stuff (except for servers, those are in there). We're in the single digits of racks, if that matters. I'm thinking of things like: Cable labeler Ethernet tester (copper at least, fibre if you need) ... ? Community wiki, because, really. [Edit] I suppose it's important to say that it's a colo facility, kind of far from the office. No food, water, etc. :(

    Read the article

  • MacBook makes a noise from the power adapter every time I flip a widget...

    - by Timmy
    OK this is bizarre. But basically, what happens is on my MacBook (latest model) whenever I 'flip' a Dashboard Widget I hear a little noise for the duration of the flip: like a tiny continuous squeak noise. It's quite strange. However, it only ever happens when the MagSafe cable is plugged in. WHY?! :'( The noise appears to me emitted from the MagSafe area itself, but, there's not any other CoreAnimation or Quartzey bits that cause this to happen, it only happens with Dashboard widgets... The noise is very quiet and you can only hear it in a silent room. Edit: Running the latest Snow Leopard.

    Read the article

  • Ubuntu web site hosting & free ,tk domain

    - by user5819
    Hello, I am sort of new to web hosting so sorry if I ask bad questions. I have a pc that runs ubuntu I instaled apache and now I host a web site, but I need a domain name so I found out .tk is free. The site works when typing 192.168.1.x in the browser(x= a number) but in dot.tk when I register in ip it whats one that look like 79.117.x.x so thats where I get stuck, I think I managed to make my ip address static but it still looks like 192.168.1.x and I can't put that in because it says: " This IP address is not valid". Why must it have the ip address that looks like 79.117.x.x and won't work with the internal static one and how can I do to host my site with a .tk domain name ? PS: I'm using a cisco router that's connected with computer via a cable.

    Read the article

  • MacBook makes a noise from the MagSafe connection every time I flip a widget...

    - by Timmy
    OK this is bizarre. But basically, what happens is on my MacBook (latest model) whenever I 'flip' a Dashboard Widget I hear a little noise for the duration of the flip: like a tiny continuous squeak noise. It's quite strange. However, it only ever happens when the MagSafe cable is plugged in. WHY?! :'( The noise appears to me emitted from the MagSafe area itself, but, there's not any other CoreAnimation or Quartzey bits that cause this to happen, it only happens with Dashboard widgets... The noise is very quiet and you can only hear it in a silent room. Edit: Running the latest Snow Leopard.

    Read the article

  • PPP connection between PalmOS and Ubuntu (over ttyUSB0?) without crashy "visor" kernel module

    - by Chris Boyle
    I have a Palm Treo 680 which I'd like to use as a media remote, using Palm MPC. Almost the exact instructions on that page used to work perfectly for establishing a PPP connection over the USB cable; I think I last tried it in Ubuntu 9.04 (Jaunty). In Karmic, I find that /dev/ttyUSB{0,1} are not present by default, and when I modprobe visor to get them, the Palm immediately crashes and reboots, as seen in Ubuntu bug 522753 (it reboots again as long as the module is still loaded and USB is still connected). The usbserial module has the same result. From reading that bug and elsewhere, it appears that the visor module is abandoned, and jpilot and friends use some other approach to talk to PalmOS over USB these days, which might not even involve a ttyUSB device. My question is, therefore: How do I create a PPP connection between PalmOS and Karmic without crashing the Palm?

    Read the article

  • How to capture footage from an analog TV?

    - by hope
    I have only an old analog TV with just RCA connectors and a coaxial/cable in/out wire. It uses no HDMI interface, etc. I would like to know the cheapest method possible where the current video footage can be transferred and made into a target digital video file format and be copyable/transferrable via USB. Are there any devices that can do this with an analog TV? Basically, how can I get something along these lines done and for cheap?P I do NOT want to stream; I want footage recorded off the TV and stored via a digital encoding of a video file.

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >