Search Results

Search found 25894 results on 1036 pages for 'hard disk space'.

Page 49/1036 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• Is my HDD dead forever?

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken and it couldn't be recognized by the BIOS. I have another of the same hard drive, so I exchanged the boards. I found out that there is a problem on its board since my good hard drive didn't work. But the broken hard drive doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hard drive is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hard drive but with the wrong size (2TB). I try to make it read the hard drive but it got an I/O error reading sector. It tries to read, the hard drive spins up. So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do to recover the files from it?

  Read the article

• Data recovery on a corrupted 3TB disk

  - by Mark K Cowan

  Short version I probably need software to run a deep-scan recovery (ideally on Linux) to find files on NTFS filesystem. The file data is intact, but the references are no longer present. Analogous to recovering data from a "quick-formatted" partition. Hopefully there is a smarter way available than deep-scan, one which would recover filenames and possibly paths. Long version I have a 3TB disk containing a load of backups. Windows 7 SP1 refused to detect the disk when plugged in directly via SATA, so I put it on a USB/SATA adaptor which seemed to work at first. The SATA/USB adaptor probably does not support disks over 2.2TB though. Windows first asked me if I wanted to 'format' the disk, then later showed me most of the contents but some folder were inaccessible. I stupidly decided to run a CHKDSK on my backup disk, which made the folders accessible but also left them empty. I connected this disk via SATA to my main PC (Arch Linux). I tried: testdisk ntfsundelete ntfsfix --no-action (to look for diagnostically relevant faults, disk was "OK" though) to no avail as the files references in the tables had presumably been zeroed out by CHKDSK, rather than using a typical journal'd deletion). If it is useful at all, a majority of the files that I want to recover are JPEG, Photoshop PSD, and MPEG-3/MPEG-4/AVI/MKV files. If worst comes to worst, I'll just design my own sector scanner and use some simple heuristic-driven analysis to recover raw binary blocks of data from the disk which appears to match the structures of the above file types. I am unfamiliar with the exact workings of NTFS but used to be proficient at recovering FAT32 systems with just a hex-editor, so I can provide any useful diagnostic information if you let me know how to find it! My priorities in ascending order of importance for choosing the accepted answer: Restores directory structure Recovers many filenames in addition to the file data Is free / very cheap Runs on Linux Recovers a majority of file data The last point is the most important, but the more of the higher points you match the more rep you'll probably get :)

  Read the article

• How to extend a Linux PV partition online after virtual disk growth

  - by Yves Martin

  VMware allows to extend the size of a virtual disk online - when the VM is running. The next expected steps for Linux system are: extend the partition: delete and create a larger one with fdisk extend the PV size with pvresize use free extents for lvresize operations and then resize2fs for file system But I am stuck on the first step: fdisk and sfdisk still display the old size for the disk. My disk is a SCSI virtual disk connected thanks to the virtual LSI Logic controller. How to refresh the virtual disk size and partition table information available in Linux kernel without reboot ? As far as I know all that steps are possible for a running Windows, without reboot and even without any user actions thanks to VMWare tools. On Linux, I expects to do all steps online too and I already know steps 2, 3 and 4 work online. But the first one - change partition size declared in the partition table (still) seems to require a reboot. Update: My system is a Debian Lenny with kernel 2.6.26 and the disk I have extended is the main disk with a large PV containing the "root" LV for "/".

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  Hi, partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• Recovering drive via boot to Win7 setup command prompt

  - by Valamas

  I am trying to recover data from two old IDE drives. Drive1 has been successful, but something is wrong with Drive2. It does not appear as a drive letter. Due to limited legacy hardware, the only way i can see these drives is to boot using windows 7 setup and goto the command prompt. Without going further as to why, my question is how i can access the data in this command prompt. I discovered DISKPART command and while a first time user, it looked like something that can fix my problem. Here are the results of my diskpart commands. At the bottom is a image of the commands taken with a camera. The Drive2 is present because when using the diskpart command, I can see it. How can I copy the information using a robocopy script if the drive letter is not available? how can I assign a drive letter? Is there any repair command I need to execute? When i execute DISKPART, the following is what i see. DISKPART> LIST DISK Disk### Status Size Free Disk 5 Online 37 GB 2048 KB So then I select disk 5. DISKPART> SELECT DISK 5 "Disk 5 is now the selected disk" When I list partition DISKPART> LIST PARTITION Partition ### Type Size Partition 1 Primary 101 MB Partition 2 Primary 37 GB So I select partition 2 "Partition 2 is now the selected partition." I then try to assign a drive letter DISKPART> ASSIGN LETTER=G "There is no volume specified." "Please select a volume and try again." When i list volume the drive is not present. DISKPART> LIST VOLUME Result of the above commands

  Read the article

• Which upgrade path for disk IO bound postgres server?

  - by user41679

  Hi all, We currently have a Sun x4270 with 2xquad core Xeon Nehalmen 2.93ghz cores (16 threads), 72 gig of ram and 16 x 10k SAS disks split between the os raid 1, a partition for the Write Ahead Logs which is raid 10 and a partition for the database tables and indexes which is also raid 10, all xfs. I'm currently evaluating which path to go down in terms of upgrades. We'll be sharding the DB at some point soon, but for now I need to focus on hardware upgrades specifically. The machine is not CPU or memory bound at all at the moment, just IOWait is become an issue. The machine is mostly write access as we have a heavy caching layer. We're seeing about 300 write IOPS average on both the database partitions. We don't have any additional storage infrastructure like a Fiber Channel or ISCSI network. Budget isn't too much of a concern, something inline with the size of this server (i.e no $1m IBM machines) Space is ok on the DB side of things, we're running out obviously but there's also some reduction we can do. Additional space would be good though. My current thoughts are either: * ISCSI SAN, possible with 10Gbit network that has solid state acceleration. * FusionIO card / Sun F20 card (will the FusionIO card work in the Sun box? * DAS shelf (something like this http://www.broadberry.co.uk/das-direct-attached-storage-servers/cyberstore-224s-das) which a combination of 15k sas disks and some Intel X25-E drives for DB indexes etc) what would I need to put in the x4270 to add a DAS shelf? I think it's a SAS HBA card, do I have to use Sun's own card or will any PCI Express card work? Anything else??? what would you guys do from your experience? I appreciate it's a lot of questions, but I haven't expanded a DB machine for a number of years and the landscape has changed dramatically since then! Any advice or feedback would be very much appreciated. Let me know if there's anything else I can clarify. Thanks in advance!

  Read the article

• How should I configure backup of my server?

  - by ed209

  I have just rented a dedicated server. If it helps this is the config I have: CPU1 Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (Cores 8) RAM 15975 MB Disk /dev/sda doesn't contain a valid partition table (=> /dev/sda doesn't) Disk /dev/sdc doesn't contain a valid partition table (=> /dev/sdc doesn't) Disk /dev/sdb doesn't contain a valid partition table (=> /dev/sdb doesn't) Disk /dev/sda: 120.0 GB (=> 114 GIB) Disk /dev/sdc: 3000.6 GB (=> 2861 GIB) Disk /dev/sdb: 3000.6 GB (=> 2861 GIB) /dev/sda is a 120GB SSD. This is where I have Ubuntu/lamp installed. It's the drive that will run my site. With the account I got two other drives of 3000GB each which I really don't need but they came with the account. I figured I could use these to back up my main 120gb drive. So a couple of things I wondered were: Should I use these for backups? How should I back up. The data I want to back up is a user uploads directory full of images and the database. Everything else is either in a code repo or backed up some other way. For example, it would be nice to know there is a disk image of the 120gb drive somewhere that I can copy over should there be any problems but equally I don't mind doing a fresh install of all the software and copying over just the images and database dump. Thanks for your advice! (also, happy to not use the two other drives and backup elsewhere if it's more sensible)

  Read the article

• Creating the “game space” for a 2D game

  - by alJaree

  How does one setup the game space for a game so that obstacles can be spawned? One example I am wondering about is doodle jump. Tile maps are limited in size and would need to change often if the user jumps a lot. How would this be done in another way than tile maps. How or what is used to create the notion of a game world where these spawned ledges/obstacles are placed as the user progresses through the stage? What is actually moving if the user jumps from ledge to ledge, what are the ledges based on in terms of the game world/space. What data structure or representation could the game use to reference and manage the spawning of these obstacles/ledges?

  Read the article

• Monitoring Database disk space

  - by Michael Freidgeim

  An article Data files: To Autogrow Or Not To Autogrow? recommends NOT to rely on auto-grow, because it causing delays in unplanned times.We should mtonitor database files(both data and log), and if they close to max capacity, manually increase the size. However it doesn't give references, how to monitor the free space inside databases. I've tried to look how to do it. It can be done manually using   execute sp_spaceused for the database in question or  sp_SOS (can be downloaded from http://searchsqlserver.techtarget.com/tip/Find-size-of-SQL-Server-tables-and-other-objects-with-stored-procedure)Alternatively you can run SQL commands as suggested in Http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=82359 by Michael Valentine Jonesselect [FREE_SPACE_MB] = convert(decimal(12,2),round((a.size-fileproperty(a.name,'SpaceUsed'))/128.000,2)) from dbo.sysfiles aMore useful article Monitor database file sizes with SQL Server Jobs describes how to setup monitoring Finally I found the excellent articleManaging Database Data Usage With Custom Space Alerts, that can be followed even support personnel without much DBA experience.

  Read the article

• Ubuntu 12.04 64 bit doesn't work on a win7 with check point full disk encryption

  - by Victor Rodriguez

  I installed Ubuntu 12.04 64 bit with the Wubi installer on a Windows 7 with Check Point Full Disk Encryption. The Wubi Installer runs without any trouble selecting the compatibility mode with WinXP and as Administrator. The problem is that after the installation is complete and the reboot done, when you restart the system, there's no option to start Ubuntu instead of Windows. I recently installed Ubuntu on other Win7 machines without any problem. But those laptops don't have the Check Point Full Disk Encryption. And when you restart the system you have the option to start in Ubuntu. If somebody has resolved this issue please share...!!! Regards! Víctor

  Read the article

• Atmospheric scattering sky from space artifacts

  - by ollipekka

  I am in the process of implementing atmospheric scattering of a planets from space. I have been using Sean O'Neil's shaders from http://http.developer.nvidia.com/GPUGems2/gpugems2_chapter16.html as a starting point. I have pretty much the same problem related to fCameraAngle except with SkyFromSpace shader as opposed to GroundFromSpace shader as here: http://www.gamedev.net/topic/621187-sean-oneils-atmospheric-scattering/ I get strange artifacts with sky from space shader when not using fCameraAngle = 1 in the inner loop. What is the cause of these artifacts? The artifacts disappear when fCameraAngle is limtied to 1. I also seem to lack the hue that is present in O'Neil's sandbox (http://sponeil.net/downloads.htm) Camera position X=0, Y=0, Z=500. GroundFromSpace on the left, SkyFromSpace on the right. Camera position X=500, Y=500, Z=500. GroundFromSpace on the left, SkyFromSpace on the right. I've found that the camera angle seems to handled very differently depending the source: In the original shaders the camera angle in SkyFromSpaceShader is calculated as: float fCameraAngle = dot(v3Ray, v3SamplePoint) / fHeight; Whereas in ground from space shader the camera angle is calculated as: float fCameraAngle = dot(-v3Ray, v3Pos) / length(v3Pos); However, various sources online tinker with negating the ray. Why is this? Here is a C# Windows.Forms project that demonstrates the problem and that I've used to generate the images: https://github.com/ollipekka/AtmosphericScatteringTest/ Update: I have found out from the ScatterCPU project found on O'Neil's site that the camera ray is negated when the camera is above the point being shaded so that the scattering is calculated from point to the camera. Changing the ray direction indeed does remove artifacts, but introduces other problems as illustrated here: Furthermore, in the ScatterCPU project, O'Neil guards against situations where optical depth for light is less than zero: float fLightDepth = Scale(fLightAngle, fScaleDepth); if (fLightDepth < float.Epsilon) { continue; } As pointed out in the comments, along with these new artifacts this still leaves the question, what is wrong with the images where camera is positioned at 500, 500, 500? It feels like the halo is focused on completely wrong part of the planet. One would expect that the light would be closer to the spot where the sun should hits the planet, rather than where it changes from day to night. The github project has been updated to reflect changes in this update.

  Read the article

• Hard drive and DVD drive are not being detected by the BIOS

  - by Shah Nsd

  My hard drive and DVD drive are not being detected by the BIOS when I go in to the boot option menu by pressing F12. When I put the hard drive in a different computer it's being detected. I am assuming it's either the mother board or the BIOS. Since the HDD is not being detected I have installed Ubuntu on a flash drive, but even that has become so slow, that it takes around 5 minutes for it to boot. I want to flash the BIOS before I think of changing the motherboard. I have downloaded the updated file and it has a flash.bat and a afudos.exe. I have to run the .bat file. I downloaded the Dos in a box and went to the DOS directory where the .bat file is and tried to run it, but it gives me the error message "This program cannot run under this operating system" Any help would be appreciated

  Read the article

• Import emails from hard disk image?

  - by Chen Xiao-Long

  My old Pentium 3 email server just died on me. Is it possible import all my emails that I had? I was running postfix and the cyrus IMAP server. I can chroot to the hard drive to run any commands if needed. After grep'ing the hard drive, I found that all of my emails are in /var/spool/imap. I assume that I can't just copy all the emails to my new server, so what do I need to do to get them onto my new server?

  Read the article

• fd partitions gone from 2 discs, md happy with it and resyncs. How to recover ?

  - by d0nd

  Hey gurus, need some help badly with this one. I run a server with a 6Tb md raid5 volume built over 7*1Tb disks. I've had to shut down the server lately and when it went back up, 2 out of the 7 disks used for the raid volume had lost its conf : dmesg : [ 10.184167] sda: sda1 sda2 sda3 // System disk [ 10.202072] sdb: sdb1 [ 10.210073] sdc: sdc1 [ 10.222073] sdd: sdd1 [ 10.229330] sde: sde1 [ 10.239449] sdf: sdf1 [ 11.099896] sdg: unknown partition table [ 11.255641] sdh: unknown partition table All 7 disks have same geometry and were configured alike : dmesg : Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect All 7 disks (sdb1, sdc1, sdd1, sde1, sdf1, sdg1, sdh1) were used in a md raid5 xfs volume. When booting, md, which was (obviously) out of sync kicked in and automatically started rebuilding over the 7 disks, including the two "faulty" ones; xfs tried to do some shenanigans as well: dmesg : [ 19.566941] md: md0 stopped. [ 19.817038] md: bind<sdc1> [ 19.817339] md: bind<sdd1> [ 19.817465] md: bind<sde1> [ 19.817739] md: bind<sdf1> [ 19.817917] md: bind<sdh> [ 19.818079] md: bind<sdg> [ 19.818198] md: bind<sdb1> [ 19.818248] md: md0: raid array is not clean -- starting background reconstruction [ 19.825259] raid5: device sdb1 operational as raid disk 0 [ 19.825261] raid5: device sdg operational as raid disk 6 [ 19.825262] raid5: device sdh operational as raid disk 5 [ 19.825264] raid5: device sdf1 operational as raid disk 4 [ 19.825265] raid5: device sde1 operational as raid disk 3 [ 19.825267] raid5: device sdd1 operational as raid disk 2 [ 19.825268] raid5: device sdc1 operational as raid disk 1 [ 19.825665] raid5: allocated 7334kB for md0 [ 19.825667] raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2 [ 19.825669] RAID5 conf printout: [ 19.825670] --- rd:7 wd:7 [ 19.825671] disk 0, o:1, dev:sdb1 [ 19.825672] disk 1, o:1, dev:sdc1 [ 19.825673] disk 2, o:1, dev:sdd1 [ 19.825675] disk 3, o:1, dev:sde1 [ 19.825676] disk 4, o:1, dev:sdf1 [ 19.825677] disk 5, o:1, dev:sdh [ 19.825679] disk 6, o:1, dev:sdg [ 19.899787] PM: Starting manual resume from disk [ 28.663228] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 28.663228] XFS mounting filesystem md0 [ 28.884433] md: resync of RAID array md0 [ 28.884433] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 28.884433] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 28.884433] md: using 128k window, over a total of 976759936 blocks. [ 29.025980] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 32.680486] XFS: xlog_recover_process_data: bad clientid [ 32.680495] XFS: log mount/recovery failed: error 5 [ 32.682773] XFS: log mount failed I ran fdisk and flagged sdg1 and sdh1 as fd. I tried to reassemble the array but it didnt work: no matter what was in mdadm.conf, it still uses sdg and sdh instead of sdg1 and sdh1. I checked in /dev and I see no sdg1 and and sdh1, shich explains why it wont use it. I just don't know why those partitions are gone from /dev and how to readd those... blkid : /dev/sda1: LABEL="boot" UUID="519790ae-32fe-4c15-a7f6-f1bea8139409" TYPE="ext2" /dev/sda2: TYPE="swap" /dev/sda3: LABEL="root" UUID="91390d23-ed31-4af0-917e-e599457f6155" TYPE="ext3" /dev/sdb1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdc1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdd1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sde1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdf1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdg: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdh: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" fdisk -l : Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8c878c87 Device Boot Start End Blocks Id System /dev/sda1 * 1 12 96358+ 83 Linux /dev/sda2 13 134 979965 82 Linux swap / Solaris /dev/sda3 135 4865 38001757+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc9bdc1e9 Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xcc356c30 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe87f7a3d Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb17a2d22 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8f3bce61 Device Boot Start End Blocks Id System /dev/sdg1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdh: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa98062ce Device Boot Start End Blocks Id System /dev/sdh1 1 121601 976760001 fd Linux raid autodetect I really dont know what happened nor how to recover from this mess. Needless to say the 5TB or so worth of data sitting on those disks are very valuable to me... Any idea any one? Did anybody ever experienced a similar situation or know how to recover from it ? Can someone help me? I'm really desperate... :x

  Read the article

• details on USB stick boot disk creation

  - by Deborah Shadovitz

  I am looking at this: http://www.ubuntu.com/download/help/create-a-usb-stick-on-ubuntu I need to create a boot disk to test Ubuntu to make sure it will run on a PC (Compaq Mini CQ10-120LA) I was given. I can create the boot disk off of a Mac (in English) or Windows (but Windows is in Spanish and foreign to me). Questions: 1) What format do I choose for the USB stick? (I wish the instructions stated this.) 2) What is Dash? (Will I know when I run the installer?) 3) Can I do this from a Mac or Windows computer? Or only from Ubuntu?

  Read the article

• Change permission to mount disk at rdesktop

  - by Tal

  I have ubuntu 10.04 and have installed rdesktop 1.7. I have run these commands: sudo umount /media/Tal sudo mount -t ntfs-3g -o uid=1000,gid=1000,umask=0000 /dev/sdb1 /media/Tal rdesktop -0 -r sound:local -f -u administrator -r clipboard:PRIMARYCLIPBOARD -r disk:tal=/media/Tal myip Tal is external hard drive connecting at USB in ntfs file system. I connect to windows 7 I see the hard drive in computer and I can access to files and create new files and folders, But when I try to copy a new file to a folder he show me an error message: You need permission perform this action Your require permission from computer's administrator to make changes to this folder Tal on my computername Disk from Remote Desktop Connection. I try chmod and chown too but I read I linux forum when it ntfs is no use. Some one can help me with my problem?

  Read the article

• Windows7 Gone after Ubuntu dual boot install

  - by Adi

  I had a very hard time to dual boot install Ubuntu 12.04 Apparently, Ubuntu has restriction of 4 partitions and I already had 4, so it just couldn't recognise my partitions. This was something I realised too late, but finally got to install Ubuntu. Now, even though Windows 7 option is listed when I try to boot my laptop, it doesn't really let me boot and just loops back to begin. I tried windows repair DVD also, didn't work. I was fine with complete fresh install of windows too, but Windows CD didn't detect my Hard Disk Drive or any partitions (even though the original C drive with Windows is still an NTFS partition, according to gParted, and I can access the data from same using Ubuntu log in). My Ubuntu works fine, but I need windows log in also. Any suggestions anyone?

  Read the article

• Folder missing in external hard drive

  - by Hans

  I have been backing up my folders, I am using Seagate Expansion portable Drive. I had created a folder called "|o|o" in the root folder of the portable drive... I copied my latest folders into "|o|o" folder to re-install ubuntu. When I open the portable drive the folder |o|o is not visible, when I ctrl+a and check properties the space used is 122GB, however when I click on the drive to view properties of the drive used space is 260GB. It looks as if the folder is there in the portable drive but I cannot access it... I have tried to view all the hidden files and "|o|o" is still not there. I am using 12.04.Can you please help me to retrieve this folder.

  Read the article

• Is there a better way to run ubuntu from usb disk

  - by Adam Butler

  I have an old laptop with a broken hard drive controller and am running the previous ubuntu from a usb. I installed this as per standard instructions by running some program that copied the live cd to the usb. This has had a few problems, it seems like it was just made for trying and not for everyday use. Ideally I would like to do a proper install to the usb disk instead of just running off the installer disk. Is there a way to do this? The main problems I have are: When adding mounts to fstab it gets overwritten on each reboot When installing updates the kernel cannot be updated

  Read the article

• Recovering data from hard disk after an accidental Ubuntu reinstallation

  - by Saurabh Agarwal

  My computer got wiped accidentally due to a fresh Ubuntu installation. Since the drive contains very important data and codes, it would be really great if the same could be recovered. It is a 2TB hard drive which had Ubuntu 10.10 earlier. It now has a Ubuntu 12.04 installed on it (which I understand occupies ~4GB). The machine has been powered off since. The installation was done using a usb with the option where the previous ubuntu installation is removed. Since installation doesn't take a lot of time, I'm inclined to think that the disk wasn't completely formatted and that most of the data is still there. I have no experience with recovery and hence a detailed explanation is very helpful. NOTE: I can arrange an additional 2TB hard disk for copying data. My computer has a fast internet connection and I have other computers connected to the network which I may use to access the previous one as well.

  Read the article

• Obtain rectangle indicating 2D world space camera can see

  - by Gareth

  I have a 2D tile based game in XNA, with a moveable camera that can scroll around and zoom. I'm trying to obtain a rectangle which indicates the area, in world space, that my camera is looking at, so I can render anything this rectangle intersects with (currently, everything is rendered). So, I'm drawing the world like this: _SpriteBatch.Begin( SpriteSortMode.FrontToBack, null, SamplerState.PointClamp, // Don't smooth null, null, null, _Camera.GetTransformation()); The GetTransformation() method on my Camera object does this: public Matrix GetTransformation() { _transform = Matrix.CreateTranslation(new Vector3(-_pos.X, -_pos.Y, 0)) * Matrix.CreateRotationZ(Rotation) * Matrix.CreateScale(new Vector3(Zoom, Zoom, 1)) * Matrix.CreateTranslation(new Vector3(_viewportWidth * 0.5f, _viewportHeight * 0.5f, 0)); return _transform; } The camera properties in the method above should be self explanatory. How can I get a rectangle indicating what the camera is looking at in world space?

  Read the article

• DBA in Space

  - by Neil Davidson

  Every now and then, you come across an idea that makes your heart jump and your skin tingle. That happened to me a few months ago, when Richard and Anthony pitched a small group of us an idea. "It's called DBA in Space", Richard said. I don't remember the rest of the pitch. "DBA in Space" is one of those phrases that's so simple, remarkable and clear that it sticks and it sticks hard. Sure, lots of people have done much hard, gritty work over the past few months to make it happen. Sure, there's...(read more)

  Read the article

• Wubi "could not retrieve the required disk image"

  - by Marc

  I tried to download Ubuntu 12.04 through Windows Installer (Wubi), but I get this error message: An error occurred: Could not retrieve the required disk image For more information, please see the log file: c:\user(username)\adddata\local\temp\wubi-12.04-rev266.log I tried to locate the file, but I can't find it, it's probably hidden. I know there's already a similar question asked, but I don't understand proxy thing Downloading error "Could not retrieve the required disk image " I was wondering will I get this same problem if I download via USB stick or CD? I'm running Windows 7 on a laptop. I'm not tech-savvy, so I need clear answer please.

  Read the article

• My Ubuntu drive is running out of space, how to fix, something is wrong

  - by Jamie Flores

  I'm moving from windows and am having trouble figuring this out: I'm getting a message that pops up saying disk space is low. It says I have 800MB free. I click on the disk usage analyzer and it shows 24.6 total capacity and 22.5 used. When I look in GParted it shows a partition at 72.6GB where I have Ubuntu installed. It also shows that 70.65GB used and 1.94 free in that partition. How do I figure out what else is in that partition? It's the only ext4 format. What am I missing?

  Read the article

• How to prevent system to generate log file

  - by shantanu

  My Question is little bit surprising, but i need it. I am using a slow processor laptop, now i found that HDD has some bad sectors and HDD response becomes slow. But disk health is ok(according to smart tools). I can not change my HDD right now. So decide to reduce disk operation. How do i prevent system to generate log file or any other file which are used to keep history? I know LOG file is very important but i don't care it right now. Please help.

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >