Search Results

Search found 16628 results on 666 pages for 'setup kit'.

Page 490/666 | < Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >

  • Multi subnet in ubuntu with dnsmasq

    - by Fox Mulder
    I have a multi lan port box that install ubuntu server 11.10. I am setup network in /etc/network/interfaces file as follow: auto lo iface lo inet loopback auto eth0 iface eth0 inet static      address 192.168.128.254      netmask 255.255.255.0      network 192.168.128.0      broadcast 192.168.128.255      gateway 192.168.128.1      dns-nameservers xxxxxx auto eth1 iface eth1 inet static      address 192.168.11.1      netmask 255.255.255.0      network 192.168.11.0      broadcast 192.168.11.255 auto eth2 iface eth2 inet static      address 192.168.21.1      netmask 255.255.255.0      network 192.168.21.0      broadcast 192.168.21.255 auto eth3 iface eth3 inet static      address 192.168.31.1      netmask 255.255.255.0      network 192.168.31.0      broadcast 192.168.31.255 I am also enable the ip forward by echo 1 /proc/sys/net/ipv4/if_forward in rc.local. my dnsmasq config as follow except-interface=eth0 dhcp-range=interface:eth1,set:wifi,192.168.11.101,192.168.11.200,255.255.255.0 dhcp-range=interface:eth2,set:kids,192.168.21.101,192.168.21.200,255.255.255.0 dhcp-range=interface:eth3,set:game,192.168.31.101,192.168.31.200,255.255.255.0 the dhcp was working fine in eth1,eth2,eth3, any machine plug in the subnet can get correct subnet's ip. My problem was, each subnet machine can't ping each other. for example. 192.168.11.101 can't ping 192.168.21.101 but can ping 192.168.128.1 192.168.31.101 can't ping 192.168.21.101 but can ping 192.168.128.1 I am also try to using route add -net 192.168.11.0 netmask 255.255.255.0 gw 192.168.11.1 (and also 192.168.21.0/192.168.31.0) at this multi-lan-port machine. But still won't work. Does anyone can help ? Thanks.

    Read the article

  • Best Practices for High Volume CPA Import Operations with ebXML in B2B 11g

    - by Shub Lahiri, A-Team
    Background B2B 11g supports ebXML messaging protocol, where multiple CPAs can be imported via command-line utilities.  This note highlights one aspect of the best practices for import of CPA, when large numbers of CPAs in the excess of several hundreds are required to be maintained within the B2B repository. Symptoms The import of CPA usually is a 2-step process, namely creating a soa.zip file using b2bcpaimport utility based on a CPA properties file and then using b2bimport to import the b2b repository.  The commands are provided below: ant -f ant-b2b-util.xml b2bcpaimport -Dpropfile="<Path to cpp_cpa.properties>" -Dstandard=true ant -f ant-b2b-util.xml b2bimport -Dlocalfile=true -Dexportfile="<Path to soa.zip>" -Doverwrite=true Usually the first command completes fairly quickly regardless of the number of CPAs in the repository. However, as the number of trading partners within the repository goes up, the time to complete the second command could go up to ~30 secs per operation. So, this could add up to a significant amount, if there is a need to import hundreds of CPA in a production system within a limited downtime, maintenance window.  Remedy In situations, where there is a large number of entries to be imported, it is best to setup a staging environment and go through the import operation of each individual CPA in an empty repository. Since, this will be done in an empty repository, the time taken for completion should be reasonable.  After all the partner profiles have been imported, a full repository export can be taken to capture the metadata for all the entries in one file.  If this single file with all the partner entries is imported in a loaded repository, the total time taken for import of all the CPAs should see a dramatic reduction. Results Let us take a look at the numbers to see the benefit of this approach. With a pre-loaded repository of ~400 partners, the individual import time for each entry takes ~30 secs. So, if we had to import another 100 partners, the individual entries will take ~50 minutes (100 times ~30 secs). On the other hand, if we prepare the repository export file of the same 100 partners from a staging environment earlier, the import takes about ~5 mins. The total processing time for the loading of metadata, specially in a production environment, can thus be shortened by almost a factor of 10. Summary The following diagram summarizes the entire approach and process. Acknowledgements The material posted here has been compiled with the help from B2B Engineering and Product Management teams.

    Read the article

  • Problems uploading package to launchpad

    - by user74513
    I'm having a lot of problems uploading my showdown project to a PPA. I've setup correctly PGP keys and my public ssh key to launchpad. I've packaged with debuild my C++ project, producing a source package lintian gave me only those two warnings that I think are ok for the showdown rules: W: massren source: native-package-with-dash-version W: massren source: binary-nmu-debian-revision-in-source 1.0-0extras12.04.1~ppa2 Producing a binary package works to and the package installs without problem on my ubuntu 12.04 machine, I only have a few more lintian warnings about the fact I'm installing in /opt/extras.ubuntu.com/ I'm uploading with: dput ppa:gabrielegreco/massren massren_1.0-0extras12.04.1~ppa2_source.changes When I upload with dput I have no errors, signatures seems ok, and public key seems accepted to (since the upload goes on without asking passwords...): dput ppa:gabrielegreco/massren massren_1.0-0extras12.04.1~ppa2_source.changes Checking signature on .changes gpg: Signature made Mon 02 Jul 2012 10:00:38 AM CEST using RSA key ID 49982576 gpg: Good signature from "Gabriele Greco " Good signature on /home/gabry/no-backup/massren_1.0-0extras12.04.1~ppa2_source.changes. Checking signature on .dsc gpg: Signature made Mon 02 Jul 2012 10:00:33 AM CEST using RSA key ID 49982576 gpg: Good signature from "Gabriele Greco " Good signature on /home/gabry/no-backup/massren_1.0-0extras12.04.1~ppa2.dsc. Uploading to ppa (via ftp to ppa.launchpad.net): Uploading massren_1.0-0extras12.04.1~ppa2.dsc: done. Uploading massren_1.0-0extras12.04.1~ppa2.tar.gz: done. Uploading massren_1.0-0extras12.04.1~ppa2_source.changes: done. Successfully uploaded packages. At the moment I'm not receiving responses from launchpad site, but the upload does not show in the ppa page. Previous attempts gave me response e-mails with different kind of errors: File massren_1.0-0extras12.04.1~ppa1.tar.gz mentioned in the changes has a checksum mismatch. 1503fa155226cbc4aba2f8ba9aa11a75 != 294a5e0caf3fe95b0b007a10766e9672 File massren_1.0-0extras12.04.1~ppa1.tar.gz mentioned in the changes has a checksum mismatch. 1503fa155226cbc4aba2f8ba9aa11a75 != 294a5e0caf3fe95b0b007a10766e9672 Or more cryptic: GPG verification of /srv/launchpad.net/ppa-queue/incoming/upload-ftp-20120629-163320-001135/~gabrielegreco/massren/ubuntu/massren_1.0-0extras12.04.1~ppa1.dsc failed: Verification failed 3 times: ["(7, 58, u'No data')", "(7, 58, u'No data')", "(7, 58, u'No data')"] Further error processing not possible because of a critical previous error. Any idea how can I solve this problem? I'm new to ubuntu packaging, so I may miss some step... There is an alternative to dput (aka manual upload)?

    Read the article

  • SharePoint Thoughts

    - by Tim Murphy
    I was listening to .NET Rocks episode #713 and it got me thinking about a number of SharePoint related topics. I have been working with SharePoint since the 2001 product came out and have watched it evolve over the years.  Today SharePoint is one of the most powerful and flexible products in the market.  Of course that doesn’t mean there isn’t room for improvement (a lot of improvement in fact) and with much power comes much responsibility. My main gripe these days is that you have to develop on a server instance.  This adds a real barrier to entry for developers.  You either have to run VMWare or Hyper-V on your developer machine or actually develop on your dev server for most tasks.  Yes, there is a way to setup a Windows 7 machine with the SharePoint components but it is very hackish. Beyond that the tools in VS2010 are a great leap forward from past generations.  Not requiring a separate package creation tool is not the least of the improvements.  Better workflow and web part development have also eased the burden of many developers. The other thing the show brought up in my thoughts was more around usage.  Users want to be able to self server everything without regard to what affect that has on leveraging their data from a corporate perspective.  My coworkers who work on Lotus Notes ask why the user can’t just do what ever they want? Part of the reason is that those features have not been built, but the other part is that giving them those features is often like giving an infant a loaded hand gun.  You can do it but it doesn’t make it the smart thing to do. As with any tool that is going to be used in the enterprise it should be subject to governance.  If controls are not in place as they said in the episode of DNR the document libraries and I believe SharePoint in general starts to look as disarrayed and unusable as a shared drive.  Consider these factors before giving into every whim of the users.  You should be able to explain to them the tradeoffs of giving them full control versus being able to leverage the information they collect to the benefit of the organization. These are just a couple of the thoughts that were triggered by the show.  I’m sure there are more discussions that can be had.  Feel free to leave your comments about the pros and cons of SharePoint. del.icio.us Tags: .NET Rocks,SharePoint,software development

    Read the article

  • Enabling Attachments in Oracle Forms

    - by Manoj Madhusoodanan
    In this blog I will demonstrate how we can enable attachments in Oracle Form. The user ask is to capture a job description which will be along text. Oracle Apps has a feature called attachments, through some easy setup we can enable attachments in forms. We will be going to addresscustomer ask through this feature. Step 1 : Identify Form Name First thing you have to do is to identify the form to enable attachment. In this scenario form will be PERWSDJT ( Job form in HRMS ). Step 2 :  Identify Document Entity exists or not. If exists then do nothing otherwise create new. Step 3 : Create Document Categories. Here I will create a category Job Description with Default Data Type Long Text and Application Human Resources.Onceit is done I will assign this to Create Job form. Step: 3 Query Attachment Functions for PERWSDJT. Click on Categories and add Job Description.Make sure enabled check box is checked. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Step 4 : Turn off HR:Use Standard Attachments profile option. Output Go to Work Structures > Job > Description

    Read the article

  • CodePlex Daily Summary for Saturday, November 03, 2012

    CodePlex Daily Summary for Saturday, November 03, 2012Popular ReleasesZXMAK2: Version 2.6.8.2: fix save to SZX snapshot for +3 model fix +3 ULA timingsLaunchbar: Launchbar 4.2.2.0: This release is the first step in cleaning up the code and using all the latest features of .NET 4.5 Changes 4.2.2 (2012-11-02) Improved handling of left clicks 4.1.0 (2012-10-17) Removed tray icon Assembly renamed and signed with strong name Note When you upgrade, Launchbar will start with the default settings. You can import your previous settings by following these steps: Run Launchbar and just save the settings without configuring anything Shutdown Launchbar Go to the folder %LOCA...CommonLibrary.NET: CommonLibrary.NET 0.9.8.8: Releases notes for FluentScript located at http://fluentscript.codeplex.com/wikipage?title=Release%20Notes&referringTitle=Documentation Fluentscript - 0.9.8.8 - Final ReleaseApplication: FluentScript Version: 0.9.8.8 Build: 0.9.8.8 Changeset: 77368 ( CommonLibrary.NET ) Release date: November 2nd, 2012 Binaries: CommonLibrary.dll Namespace: ComLib.Lang Project site: http://fluentscript.codeplex.com/ Download: http://commonlibrarynet.codeplex.com/releases/view/90426 Source code: http://common...Mouse Jiggler: MouseJiggle-1.3: This adds the much-requested minimize-to-tray feature to Mouse Jiggler.Umbraco CMS: Umbraco 4.10.0 Release Candidate: This is a Release Candidate, which means that if we do not find any major issues in the next week, we will release this version as the final release of 4.10.0 on November 9th, 2012. The documentation for the MVC bits still lives in the Github version of the docs for now and will be updated on our.umbraco.org with the final release of 4.10.0. Browse the documentation here: https://github.com/umbraco/Umbraco4Docs/tree/4.8.0/Documentation/Reference/Mvc If you want to do only MVC then make sur...Skype Auto Recorder: SkypeAutoRecorder 1.3.4: New icon and images. Reworked settings window. Implemented high-quality sound encoding. Implemented a possibility to produce stereo records. Added buttons with system-wide hot keys for manual starting and canceling of recording. Added buttons for opening folder with records. Added Help button. Fixed an issue when recording is continuing after call end. Fixed an issue when recording doesn't start. Fixed several bugs and improved stability. Major refactoring and optimization...Access 2010 Application Platform - Build Your Own Database: Application Platform - 0.0.2: Release 0.0.2 Created two new users. One belongs to the Administrators group and the other to the Public group. User: admin Pass: admin User: guest Pass: guest Initial Release This is the first version of the database. At the moment is all contained in one file to make development easier, but the obvious idea would be to split it into Front and Back End for a production version of the tool. The features it contains at the moment are the "Core" features.Python Tools for Visual Studio: Python Tools for Visual Studio 1.5: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. For a quick overview of the general IDE experience, please watch this video There are a number of exciting improvement in this release comp...BCF.Net: BCF.Net: BCF.Net-20121024 source codeAssaultCube Reloaded: 2.5.5: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: Fixed potential bot bugs: Map change, OpenAL...Edi: Edi 1.0 with DarkExpression: Added DarkExpression theme (dialogs and message boxes are not completely themed, yet)DirectX Tool Kit: October 30, 2012 (add WP8 support): October 30, 2012 Added project files for Windows Phone 8MCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...MVVM Light Toolkit: MVVM Light Toolkit V4.1 for Visual Studio 2012: This version only supports Visual Studio 2012 (and all Express editions too). If you use Visual Studio 2010, please stay tuned, we will publish an update in a few days with support for VS10. V4.1 supports: Windows Phone 8 Windows 8 (Windows RT) Silverlight 5 Silverlight 4 WPF 4.5 WPF 4 WPF 3.5 And the following development environments: Visual Studio 2012 (Pro, Premium, Ultimate) Visual Studio 2012 Express for Windows 8 Visual Studio 2012 Express for Windows Phone 8 Visual...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.73: Fix issue in Discussion #401101 (unreferenced var in a for-in statement was getting removed). add the grouping operator to the parsed output so that unminified parsed code is closer to the original. Will still strip unneeded parens later, if minifying. more cleaning of references as they are minified out of the code.RiP-Ripper & PG-Ripper: PG-Ripper 1.4.03: changes NEW: Added Support for the phun.org forum FIXED: Kitty-Kats new Forum UrlLiberty: v3.4.0.1 Release 28th October 2012: Change Log -Fixed -H4 Fixed the save verification screen showing incorrect mission and difficulty information for some saves -H4 Hopefully fixed the issue where progress did not save between missions and saves would not revert correctly -H3 Fixed crashes that occurred when trying to load player information -Proper exception dialogs will now show in place of crashesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536New Projectsappnitiren: This project's main objective is to deepen my knowledge on developing apps for windows 8 and windows phone and Buddhist philosophy of Nichiren Daishonin. Aspect - TypeScript AOP Framework: A simple AOP framework for TypeScript.AWF's PowerPoint Tab: A collection of little powerpoint utilities, including "resize all shapes".Base64 Encoder-Decoder: (Base64 Encoder/Decoder using C#)BombaJob-WF: Official Windows desktop client for BombaJob.bgBungie Test: !CCAudio: A project to create an audio recording/mixing and processing framework in C#/C++ with a look to creating a Digital Audio Workstation. EvaluationSyarem: for yuanguangexporttfschangesets: Small utility that runs agains tftp.exe(tfs power tools) and exports a given range of changesets.fjfdszjtfs: fjfdszjtfsKladionica: Ovo je mala web aplikacija koja je specijalizovana za f1 kladionicu na forumu KrstaricaListViewItem Float Test: WPF testing ground for development of a "floating" listviewitem (preeettty)Macconnell: This is my test projectNWebsec Demo site: This is the NWebsec demo website project.Ocean Flattened: Summary of this projectQuagmire: QUAGMIRE aims to make distributed data processing and visualisation simple and flexible.Scheduled SQL Jobs for DotNetNuke by IowaComputerGurus Inc.: Keeping a DotNetNuke site database clean can be a real nightmare for those hosting sites on shared hosting providers.Secretary Tool: Tool for secretaries of congregations of Jehovah's Witnesses.Secure My Install for DotNetNuke by IowaComputerGurus: This module is a single-use per DotNetNuke installation utility module that will make a number of security enhancing modifications to your "out of the box" DotNServStop: ServStop is a .NET application that makes it easy to stop several system services at once. Now you don't have to change startup types or stop them one at a time. It has a simple list-based interface with the ability to save and load lists of user services to stop. Written in C#.Simple File List for DotNetNuke by IowaComputerGurus Inc.: The Simple File List module is a Free DotNetNuke module that will list all files within a specific folder under the specific portal folder within DNN for users SOLUS3 Config Discovery: An open-source community developed tool for generating a simple text file detailing your local SIMS server settings to simplify new SOLUS3 configurations.Sort Project: Project Name: Sort Project Description: This project holds a class that extends objects type of IEnumerable by enabling them using sorting algorithms other than the buil in one within the microsoft staff SQL Azure Data Protector: This tool leverages the currently available options that Azure platform has to provide an integrated and automated solution to back up the SQL Azure databases.Throttling Suite for ASP.NET Applications: The Throttling Suite provides throttling control capabilities to the ASP.NET applications. It is highly customizable; including "log-only" mode.TidyBackups: Allows for automation of deletion of Microsoft SQL backup files based on file type (.bak) creation age as well as compression using standard ZIP technology.TrainingData: TrainingData is a set of libraries for reading and modifying training data files for Garmin and Polar heart rate monitors.Virtual eCommerce: ??? ? ?????? ????????? ??????. ??????: ??????????? ?????????, ?????????? ?????????? ?? ????????????? ?? Microsoft - ASP Web Pages with Razor Engine.WebNext: My personal web page / blog with cms on asp mvc 3Windows 8 Mouse Unsticky: Makes Windows 8 top right/left hot corners unsticky.WPForms: WPForms is simple framework for Form-driven Silverlight Windows Phone applications. Using the framework allows developers to easily create and display forms.

    Read the article

  • As the current draft stands, what is the most significant change the "National Strategy for Trusted Identities in Cyberspace" will provoke?

    - by mfg
    A current draft of the "National Strategy for Trusted Identities in Cyberspace" has been posted by the Department of Homeland Security. This question is not asking about privacy or constitutionality, but about how this act will impact developers' business models and development strategies. When the post was made I was reminded of Jeff's November blog post regarding an internet driver's license. Whether that is a perfect model or not, both approaches are attempting to handle a shared problem (of both developers and end users): How do we establish an online identity? The question I ask here is, with respect to the various burdens that would be imposed on developers and users, what are some of the major, foreseeable implementation issues that will arise from the current U.S. Government's proposed solution? For a quick primer on the setup, jump to page 12 for infrastructure components, here are two stand-outs: An Identity Provider (IDP) is responsible for the processes associated with enrolling a subject, and establishing and maintaining the digital identity associated with an individual or NPE. These processes include identity vetting and proofing, as well as revocation, suspension, and recovery of the digital identity. The IDP is responsible for issuing a credential, the information object or device used during a transaction to provide evidence of the subject’s identity; it may also provide linkage to authority, roles, rights, privileges, and other attributes. The credential can be stored on an identity medium, which is a device or object (physical or virtual) used for storing one or more credentials, claims, or attributes related to a subject. Identity media are widely available in many formats, such as smart cards, security chips embedded in PCs, cell phones, software based certificates, and USB devices. Selection of the appropriate credential is implementation specific and dependent on the risk tolerance of the participating entities. Here are the first considered actionable components of the draft: Action 1: Designate a Federal Agency to Lead the Public/Private Sector Efforts Associated with Achieving the Goals of the Strategy Action 2: Develop a Shared, Comprehensive Public/Private Sector Implementation Plan Action 3:Accelerate the Expansion of Federal Services, Pilots, and Policies that Align with the Identity Ecosystem Action 4:Work Among the Public/Private Sectors to Implement Enhanced Privacy Protections Action 5:Coordinate the Development and Refinement of Risk Models and Interoperability Standards Action 6: Address the Liability Concerns of Service Providers and Individuals Action 7: Perform Outreach and Awareness Across all Stakeholders Action 8: Continue Collaborating in International Efforts Action 9: Identify Other Means to Drive Adoption of the Identity Ecosystem across the Nation

    Read the article

  • Ask the Readers: Which Browser is a Must-Have for You on Linux?

    - by Asian Angel
    Linux systems all come with their own particular set of default browsers, but those browsers may not be the ones you want or need. This week we would like to know which browser (or browsers) are considered “must-have” on your Linux systems. As a general rule many Linux distributions have Firefox and/or Konqueror as one of the default installation browsers. During this past year the open source browser Chromium has also been gaining a lot of traction as a default install for systems. For most people these browsers are the ones that they like best or feel work well enough to not make any changes. But there are other people who want more than what is available with a default system install. They may favor a particular browser for its’ extensibility or speed…others prefer a particular browser for its’ features or minimalist UI. Whatever your preferences may be, there is a browser out there to fit your style. Some people may even prefer to run only bleeding edge nightly releases or add them in with their current browsers. The important part is that you have choices when it comes to your Linux system. What we would like to know this week is which browser or browsers you make sure are always installed on your Linux systems. Does the Linux system you use already have your favorite browser installed as part of the default set? Maybe you are content with using the default set of browsers that come with the system. Or perhaps you prefer to rework the entire browser setup on your system by removing the defaults and adding your favorites. Let us know which browsers you consider “must have” and why in the comments! Note: You can make up to two selections on today’s poll since most people will likely have more than one browser that they make certain is always installed. How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC BotSync Enables Secure FTP File Synchronization on Android Devices Enjoy Beautiful City Views with the Cityscape Theme for Windows 7 Luigi Installs Any OS on Google’s Cr-48 Notebook DIY iPad Stylus Offers Pen-Based Interaction on the Cheap Serene Blue Ubuntu Wallpaper for Your Desktop Enjoy Old School Style Video Game Fun with Chicken Invaders

    Read the article

  • What actions does Ubuntu trigger when battery is low?

    - by blueyed
    When the battery is low, the screen gets dimmed after a few seconds already. This appears to be some special power-saving mode, and might be related to the time in org.gnome.settings-daemon.plugins.power.time-low (1200 seconds (20 minutes) the default). While this seems to get triggered by gnome-settings-daemon, I wonder what else Ubuntu does when this happens (e.g. via DBus listeners), or other event listeners that look for a "low battery" state. It seems like something in this regard causes Ubuntu / X / the system to behave more sluggish afterwards (when the laptop is on AC again), and I would like to look into what might be causing this. I could not find anything related via dconf-editor, e.g. in org.gnome.settings-daemon.plugins.power. It appears to get setup via idle_configure in plugins/power/gsd-power-manager.c, but it's probably something more related to something that listens on the DBus interface, which gets notified via e.g.: if (!g_dbus_connection_emit_signal (manager->priv->connection, NULL, GSD_POWER_DBUS_PATH, "org.freedesktop.DBus.Properties", "PropertiesChanged", props_changed, &error)) I could imagine that some "power saving" property gets set, but not unset when AC is available anymore and/or the battery is not low anymore. I have looked at the CPU governor setting (/sys/devices/system/cpu/cpu*/cpufreq/scaling_governor), but it was ondemand. I am using gnome-settings-daemon with awesomeWM on Ubuntu 14.04. gnome-settings-daemon=3.8.6.1-0ubuntu11.1 I've also compared gsd's plugins/power/gsd-power-manager.c with the one from Debian's gnome-settings-daemon-3.12.1, but could not find anything obvious that might have been fixed/changed in this regard. I have managed to trigger the gnome-power-manager's gnome-settings plugin (which dims the screen etc), by patching upower and use it after killing the system's upower daemon. (note that it's probably only energy that is being used by gpm to calculate it by itself). It does not make the system become sluggish.. OTOH I have not heard the speaker's beeping, which might come from the BIOS, which might be involved here, too - or other programs using the kernel's interface on /sys/class/power_supply/BAT0/. --- src/linux/up-device-supply.c.orig 2014-06-07 16:48:32.735920661 +0200 +++ src/linux/up-device-supply.c 2014-06-07 16:48:39.391920525 +0200 @@ -821,6 +821,9 @@ supply->priv->energy_old_first = 0; } + percentage = 3.1f; + time_to_empty = 3*60; + energy = 5; g_object_set (device, "energy", energy, "energy-full", energy_full,

    Read the article

  • Open GL polygons not displaying

    - by Darestium
    I have tried to follow nehe's opengl tutorial lesson 2. I use sfml for my window creation. The problem I have is that both the triangle and the quad don't show up on the screen: #include <SFML/System.hpp> #include <SFML/Window.hpp> #include <iostream> void processEvents(sf::Window *app); void processInput(sf::Window *app, const sf::Input &input); void renderCube(sf::Window *app, sf::Clock *clock); void renderGlScene(sf::Window *app); void init(); int main() { sf::Window app(sf::VideoMode(800, 600, 32), "Nehe Lesson 2"); app.UseVerticalSync(false); init(); while (app.IsOpened()) { processEvents(&app); renderGlScene(&app); app.Display(); } return EXIT_SUCCESS; } void init() { glClearDepth(1.f); glClearColor(0.f, 0.f, 0.f, 0.f); // Enable z-buffer and read and write glEnable(GL_DEPTH_TEST); glDepthMask(GL_TRUE); // Setup a perpective projection glMatrixMode(GL_MODELVIEW); glLoadIdentity(); gluPerspective(45.f, 1.f, 1.f, 500.f); glShadeModel(GL_SMOOTH); } void processEvents(sf::Window *app) { sf::Event event; while (app->GetEvent(event)) { if (event.Type == sf::Event::Closed) { app->Close(); } if (event.Type == sf::Event::KeyPressed && event.Key.Code == sf::Key::Escape) { app->Close(); } } } void renderGlScene(sf::Window *app) { app->SetActive(); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // Clear the screen and the depth buffer glLoadIdentity(); // Reset the view glTranslatef(-1.5f, 0.0f, -6.0f); // Move Left 1.5 units and into the screen 6.0 glBegin(GL_TRIANGLES); glVertex3f( 0.0f, 1.0f, 0.0f); // Top glVertex3f(-1.0,-1.0f, 0.0f); // Bottom Left glVertex3f( 1.0f,-1.0f, 0.0f); // Bottom Right glEnd(); glTranslatef(3.0f, 0.0f, 0.0f); glBegin(GL_QUADS); // Draw a quad glVertex3f(-1.0f, 1.0f, 0.0f); glVertex3f( 1.0f, 1.0f, 0.0f); glVertex3f( 1.0f,-1.0f, 0.0f); glVertex3f(-1.0f,-1.0f, 0.0f); glEnd(); } I would greatly appreciate it if someone could help me resolve my issue.

    Read the article

  • Rendering Texture Quad to Screen or FBO (OpenGL ES)

    - by Usman.3D
    I need to render the texture on the iOS device's screen or a render-to-texture frame buffer object. But it does not show any texture. It's all black. (I am loading texture with image myself for testing purpose) //Load texture data UIImage *image=[UIImage imageNamed:@"textureImage.png"]; GLuint width = FRAME_WIDTH; GLuint height = FRAME_HEIGHT; //Create context void *imageData = malloc(height * width * 4); CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); CGContextRef context = CGBitmapContextCreate(imageData, width, height, 8, 4 * width, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big); CGColorSpaceRelease(colorSpace); //Prepare image CGContextClearRect(context, CGRectMake(0, 0, width, height)); CGContextDrawImage(context, CGRectMake(0, 0, width, height), image.CGImage); glGenTextures(1, &texture); glBindTexture(GL_TEXTURE_2D, texture); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, imageData); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); Simple Texture Quad drawing code mentioned here //Bind Texture, Bind render-to-texture FBO and then draw the quad const float quadPositions[] = { 1.0, 1.0, 0.0, -1.0, 1.0, 0.0, -1.0, -1.0, 0.0, -1.0, -1.0, 0.0, 1.0, -1.0, 0.0, 1.0, 1.0, 0.0 }; const float quadTexcoords[] = { 1.0, 1.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 1.0, 1.0 }; // stop using VBO glBindBuffer(GL_ARRAY_BUFFER, 0); // setup buffer offsets glVertexAttribPointer(ATTRIB_VERTEX, 3, GL_FLOAT, GL_FALSE, 3*sizeof(float), quadPositions); glVertexAttribPointer(ATTRIB_TEXCOORD0, 2, GL_FLOAT, GL_FALSE, 2*sizeof(float), quadTexcoords); // ensure the proper arrays are enabled glEnableVertexAttribArray(ATTRIB_VERTEX); glEnableVertexAttribArray(ATTRIB_TEXCOORD0); //Bind Texture and render-to-texture FBO. glBindTexture(GL_TEXTURE_2D, GLid); //Actually wanted to render it to render-to-texture FBO, but now testing directly on default FBO. //glBindFramebuffer(GL_FRAMEBUFFER, textureFBO[pixelBuffernum]); // draw glDrawArrays(GL_TRIANGLES, 0, 2*3); What am I doing wrong in this code? P.S. I'm not familiar with shaders yet, so it is difficult for me to make use of them right now.

    Read the article

  • My father wants to learn PHP-MySQL to port his application. What I should do to help?

    - by adijiwa
    My father is a doctor/physician. About 15 years ago he started writing an application to handle his patient's medical records in his clinic at home. The app has the ability to input patient's medical records (obviously), search patients by some criteria, manage medicine stocks, output receipt to printer, and some more CRUDs. He wrote it in dBase III+. A few years later he migrated to FoxPro 2.6 for DOS and finally in a few more years he rewrote his app in Visual FoxPro 9. And now (actually two years ago) he wants to rewrite it in PHP, but he don't know how. The Visual FoxPro version of this app is still running and has no serious problem except sometimes it performs slowly. Usually there are 1-5 concurrent users. The binary and database files are shared via windows share. He did all the coding as a hobby and for free (it is for his own clinic after all). He also use this app in two other offices he managed. Some reasons of why he wants to rewrite in PHP-MySQL: He wants to learn Easier to deploy (?) Easier client setup, need only a browser What should I do to help my father? How should he start? I explored some options: I let my father learn PHP and MySQL (and HTML (and JavaScript?)) from scratch. I create/bundle framework. I'm thinking on bundling CodeIgniter and a web UI framework (any suggestion?) especially to reduce effort on writing presentation codes. What do you think? tl;dr My father (a doctor) wants to rewrite his Visual FoxPro app in PHP-MySQL. He knows very little of PHP and MySQL but he wants to learn. What should I do to help? How should he start? Some facts: My father is 50 years old. His first encounter with a PC is in early 1980s. It was IBM PC with Intel 8088. He knows BASIC. He taught me how to use DOS and how to program with BASIC. The other language he knows fairly well is dBase/FoxPro. I got my bachelor CS degree last year. I know the internals of my father's app because sometime he wants me to help him writing his app. Sorry for my english.

    Read the article

  • Nvidia driver overscan issue second monitor via dvi-d cable

    - by benmichael
    Ok, I know that I have a bit of a bizarre setup, but here goes. I have an old laptop, HP Pavilion 6000. The graphics card in there is a GeForce 7150M. The monitor connection is an old 18pin. The external monitor I use is a Samsung SyncMaster 2333. Don't ask me why, but this monitor only has a dvi-d connection (yes, i have searched it). So I have the monitor plugged into the laptop. If I use any of the Nvidia propriety drivers and try to set the resolution up to 1920x1080 (the monitor's native resolution), I get a massive overscan issue. Over the years I have tried to get this to work, tinkering with my xorg.conf to death. I have also tried this on every Ubuntu since 10.04, on all the corresponding LUbuntus, and on all the Linux Mints since Lisa. Exact same issue. I have even tried it in WinDoze and it works perfectly there (although I did get the error once, but was unable to reproduce it). Using the Open Source drivers it works perfectly iff I switch off the laptop monitor (this makes no difference with the Nvidia drivers). I would have happily gone on using the Open Source drivers, except that since upgrading to LUbuntu 12.10, the Open Source drivers make my monitor completely hazy and have the same overscan issue until I (through the haze, only because I know where things are) go to the monitor settings, activate the laptop's monitor, then deactivate it, and suddenly it comes right. I have to do this every time. So I have to find a way to fix one of them, so I may as well tackle the propriety drivers, hence this overlong question. Amidst other things, I have tried the nvidia-settings, but because it is connected to an 18pin, it detects the monitor as a vga monitor and does not give me overscan correction options. I have tried custom modlines (although there are always more of those try), I have tried using xrandr, and I have tried all the FlatPanelOptions. What I have not tried is a Gentoo build, as I don't have time any more to do that installation, but up to about three years ago when I ran Gentoo exclusively I did not have this issue. Below is an link to an image with a red highlight around the portion of the screen visible to me, the numbers around it are the number of pixels which are cut off. This does seem to drift a few pixels every now and then. Thanks in advance. Nvidia driver issue image

    Read the article

  • How to have an Arduino wait until it receives data over serial?

    - by SonicDH
    So I've wired up a little robot with a sound shield and some sensors. I'm trying to write a sketch that will let check the sensors. What I'd like for it to do is print out a little menu over serial, wait until the user sends a selection, jump to the function that matches their selection, then (once the function is done) jump back and print the menu again. Here's what I've written, but I'm not a that good of a coder, so it doesn't work. Where am I going wrong? #include <Servo.h> Servo steering; Servo throttle; int pos = 0; int val = 0; void setup(){   Serial.begin(9600);   throttle.write(90);   steering.write(90);   pinMode(A0, INPUT);   pinMode(7, INPUT);   char ch = 0; } void loop(){   Serial.println("Menu");   Serial.println("--------------------");   Serial.println("1. Motion Readout");   Serial.println("2. Distance Readout");   Serial.println("3. SD Directory Listing");   Serial.println("4. Sound Test");   Serial.println("5. Car Test");   Serial.println("--------------------");   Serial.println("Type the number and press enter");   while(char ch = 0){   ch = Serial.read();}   char ch;   switch(ch)   {     case '1':     motion();   }    ch = 0; } //menu over, lets get to work. void motion(){   Serial.println("Haha, it works!"); } I'm pretty sure a While loop is the right thing to do, but I'm probably implementing it wrong. Can anyone shed some light on this?

    Read the article

  • Analysing SQLBits Feedback

    - by jamiet
    Earlier this week I received all the feedback that people offered on my session at SQLBits 7 in York – “SSIS Dataflow Performance Tuning” (the video is available online if you wish to see it). As you may have gathered from previous posts on this blog and my less-SQLy-focused Wordpress blog I am a big fan of collecting and tracking both personal and public data and session feedback lends itself very well to tracking because it is quantitative rather than qualitative; by that I mean attendees are invited to provide marks out of ten rather than (or, in the case of SQLBits, as well as) written comments. The SQLBits feedback is also useful because they use a consistent format – the same questions are asked each time – this means it is particularly easy to to track whether the scores that people give are trending up or down. I suspect that somewhere the SQLBits organisers have a big Analysis Services cube (ok, perhaps its an Excel pivot table) that allows them to analyse these scores per conference, speaker, track etc.… and there’s no reason that we as session speakers cannot do the same thing. To that end I have started to store my feedback in an Excel spreadsheet of my own which in the interests of transparency is available for public viewing (only a web browser required) on SkyDrive at http://cid-550f681dad532637.office.live.com/view.aspx/Public/Misc/Personal%20SQLBits%20Session%20Feedback.xlsx. I have used a pivot table to aggregate all that feedback and here is a screenshot: I am hereby making a public plea to the SQLBits organisers (on the off-chance that they are reading) to please continue to keep the feedback format consistent in the future and I encourage them to publish all of the feedback in an anonymised form. I would also encourage anyone doing conference speaking to track their conference feedback in the same way that I am doing so that you get an insight into whether or not you are improving over time. It is not difficult to setup and maintaining it as you do more sessions takes very little effort. Storing feedback data like this leads me to wider thoughts about well-known conventions and data format standardisation. Let’s imagine a utopia where there were a standard set of questions for capturing session feedback that were leveraged at every conference regardless of subject matter, location or culture; that would give rise to immense cross-conference and cross-discipline analysis – the data analyst in me goes giddy at the thought of it. It is scenarios like this that drive my interest both in data formats such as iCalendar, microformats and RDF, and in emerging movements such as the semantic web and linked data, all things which I have written about in the past. I don’t know whether we will ever reach the stage where every piece of data has structured, descriptive metadata associated with it but I live in hope. @Jamiet

    Read the article

  • Showing ZFS some LOVE

    - by Kristin Rose
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} L is for the way you look at us, and O because we’re Oracle, but V is very, very, extra ordinary, and E, well that’s obvious… E is because Oracle’s new Sun ZFS Storage Appliance is Excellent, and here at OPN, we like spell out the obvious!  If you haven’t already heard, the Sun ZFS Appliance has “A simple, GUI-driven setup and configuration, solid price-performance and world-class Oracle support behind it. The CRN Test Center recommends the Sun ZFS Storage”. Read more about what CRN said here. Oracle's Sun ZFS Appliance family delivers enterprise-class network attached storage (NAS) capabilities with leading Oracle integration, simplicity, efficiency, performance, and TCO.  The systems offer an easy way to manage and expand your storage environment at a lower cost, with more efficiency, better data integrity, and higher performance when compared with competitive NAS offerings. Did we mention that set up, including configuring, will take you less than an hour since it all comes in one box and is so darn simple to use? So if you L-O-V-E what you’re hearing about Oracle’s Sun Z-F-S, learn more by watching the video below, and visiting any of our available resources . It Had to Be You, The OPN Communications Team

    Read the article

  • Storing hierarchical template into a database

    - by pduersteler
    If this title is ambiguous, feel free to change it, I don't know how to put this in a one-liner. Example: Let's assume you have a html template which contains some custom tags, like <text_field />. We now create a page based on a template containing more of those custom tags. When a user wants to edit the page, he sees a text field. he can input things and save it. This looks fairly easy to set up. You either have something like a template_positions table which stores the content of those fields. Case: I now have a bit of a blockade keeping things as simple as possible. Assume you have the same tag given in your example, and additionally, <layout> and <repeat> tags. Here's an example how they should be used: <repeat> <layout name="image-left"> <image /> <text_field /> </layout> <layout name="image-right"> <text_field /> <image /> </layout> </repeat> We now have a block which can be repeated, obviously. This means: when creting/editing a page containing such a template block, I can choose between a layout image-left and image-right which then gets inserted as content element (where content for <image /> and <text_field /> gets stored). And because this is inside a <repeat>, content elements from the given layouts can be inserted multiple times. How do you store this? Simply said, this could be stored with the same setup I've wrote in the example above, I just need to add a parent_id or something similiar to maintain a hierarchy. but I think I am missing something. At least the relation between an inserted content element and the origin/insertion point is missing. And what happens when I update the template file? Do I have to give every custom tag that acts as editable part of a template an identifier that matches an identifier in the template to substitue them correctly? Or can you think of a clean solution that might be better?

    Read the article

  • Good, simple reasons for having multiple environments

    - by smp7d
    Throughout my career I had worked at companies that had a collection of different environments for different purposes. We always had more or less our desktop environment, a test environment, a QA environment, a staging environment and a production environment. This went for both servers/applications and any data sources we were using. When I started at my current company I found that 90% of the apps were either developed on a desktop environment against production data sources or developed directly on the production server depending on the platform. I wasn't fazed because I was hired in part to make changes to improve the way the development team functioned, which was clear from my interview process. We slowly started to turn the philosophy and pretty soon, most of the apps could be run in either a desktop, test or production environment. Not too long after that staging came around as well. Now most of our developers see the benefit of this methodology and defend it vigilantly. However, we have a number of legacy apps that never got migrated. We also have a number of legacy programmers who think of this as a waste of time. Unfortunately, we got lip service but never full buy-in from management. We got what we thought was a commitment to invest substantially in this about a year ago, but nothing materialized despite the considerable planning that we put into it. Now we are finding that we need more and more environments. We need help from the server/network administration teams for setup and we need participation from the business stakeholders to support the release cycle. We are at a place now where a project can function what I consider "normally" only if you have the right people on the project and the time to set up the proper environments. I'd love to present a complete argument, but management really has no time and interest in hearing me out until there is a critical issue. I can't really articulate the benefits simply as it always just seemed second nature to me. I was wondering if there are any good, simple, irrefutable reasons for the separation of environments that would get managers with no development experience to get behind this idea. Are there any good resources/literature on the topic?

    Read the article

  • Rendering My Fault Message

    - by onefloridacoder
    My coworkers setup  a nice way to get the fault messages from our service layer all the way back to the client’s service proxy layer.  This is what I needed to work on this afternoon.  Through a series of trials and errors I finally figured this out. The confusion was how I was looking at the exception in the quick watch viewer.  It appeared as though the EventArgs from the service call had somehow magically been cast back to FaultException(), not FaultException<T>.  I drilled into the EventArgs object with the quick watch and I copied this code to figure out where the Fault message was hiding.  Further, when I copied this quick watch code into the IDE I got squigglies.  Poop. 1: ((System 2: .ServiceModel 3: .FaultException<UnhandledExceptionFault>)(((System.Exception)(e.Result)).InnerException)).Detail.FaultMessage I wont bore you with the details but here’s how it turned out.   EventArgs which I’m calling “e” is not the result such as some collection of items you’re expecting.  It’s actually a FaultException, or in my case FaultException<T>.  Below is the calling code and the callback to handle the expected response or the fault from the completed event. 1: public void BeginRetrieveItems(Action<ObservableCollection<Model.Widget>> FindItemsCompleteCallback, Model.WidgetLocation location) 2: { 3: var proxy = new MyServiceContractClient(); 4:  5: proxy.RetrieveWidgetsCompleted += (s, e) => FindWidgetsCompleteCallback(FindWidgetsCompleted(e)); 6:  7: RetrieveWidgetsRequest request = new RetrieveWidgetsRequest { location.Id }; 8:  9: proxy.RetrieveWidgetsAsync(request); 10: } 11:  12: private ObservableCollection<Model.Widget> FindItemsCompleted(RetrieveWidgetsCompletedEventArgs e) 13: { 14: if (e.Error is FaultException<UnhandledExceptionFault>) 15: { 16: var fault = (FaultException<UnhandledExceptionFault>)e.Error; 17: var faultDetailMessage = fault.Detail.FaultMessage; 18:  19: UIMessageControlDuJour.Show(faultDetailMessage); 20: return new ObservableCollection<BinInventoryItemCountInfo>(); 21: } 22:  23: var widgets = new ObservableCollection<Model.Widget>(); 24:  25: if (e.Result.Widgets != null) 26: { 27: e.Result.Widgets.ToList().ForEach(w => widgets.Add(this.WidgetMapper.Map(w))); 28: } 29:  30: return widgets; 31: }

    Read the article

  • Developing a Support Plan for Cloud Applications

    - by BuckWoody
    Last week I blogged about developing a High-Availability plan. The specifics of a given plan aren't as simple as "Step 1, then Step 2" because in a hybrid environment (which most of us have) the situation changes the requirements. There are those that look for simple "template" solutions, but unless you settle on a single vendor and a single way of doing things, that's not really viable. The same holds true for support. As I've mentioned before, I'm not fond of the term "cloud", and would rather use the tem "Distributed Computing". That being said, more people understand the former, so I'll just use that for now. What I mean by Distributed Computing is leveraging another system or setup to perform all or some of a computing function. If this definition holds true, then you're essentially creating a partnership with a vendor to run some of your IT - whether that be IaaS, PaaS or SaaS, or more often, a mix. In your on-premises systems, you're the first and sometimes only line of support. That changes when you bring in a Cloud vendor. For Windows Azure, we have plans for support that you can pay for if you like. http://www.windowsazure.com/en-us/support/plans/ You're not off the hook entirely, however. You still need to create a plan to support your users in their applications, especially for the parts you control. The last thing they want to hear is "That's vendor X's problem - you'll have to call them." I find that this is often the last thing the architects think about in a solution. It's fine to put off the support question prior to deployment, but I would hold off on calling it "production" until you have that plan in place. There are lots of examples, like this one: http://www.va-interactive.com/inbusiness/editorial/sales/ibt/customer.html some of which are technology-specific. Once again, this is an "it depends" kind of approach. While it would be nice if there was just something in a box we could buy, it just doesn't work that way in a hybrid system. You have to know your options and apply them appropriately.

    Read the article

  • Developing a Support Plan for Cloud Applications

    - by BuckWoody
    Last week I blogged about developing a High-Availability plan. The specifics of a given plan aren't as simple as "Step 1, then Step 2" because in a hybrid environment (which most of us have) the situation changes the requirements. There are those that look for simple "template" solutions, but unless you settle on a single vendor and a single way of doing things, that's not really viable. The same holds true for support. As I've mentioned before, I'm not fond of the term "cloud", and would rather use the tem "Distributed Computing". That being said, more people understand the former, so I'll just use that for now. What I mean by Distributed Computing is leveraging another system or setup to perform all or some of a computing function. If this definition holds true, then you're essentially creating a partnership with a vendor to run some of your IT - whether that be IaaS, PaaS or SaaS, or more often, a mix. In your on-premises systems, you're the first and sometimes only line of support. That changes when you bring in a Cloud vendor. For Windows Azure, we have plans for support that you can pay for if you like. http://www.windowsazure.com/en-us/support/plans/ You're not off the hook entirely, however. You still need to create a plan to support your users in their applications, especially for the parts you control. The last thing they want to hear is "That's vendor X's problem - you'll have to call them." I find that this is often the last thing the architects think about in a solution. It's fine to put off the support question prior to deployment, but I would hold off on calling it "production" until you have that plan in place. There are lots of examples, like this one: http://www.va-interactive.com/inbusiness/editorial/sales/ibt/customer.html some of which are technology-specific. Once again, this is an "it depends" kind of approach. While it would be nice if there was just something in a box we could buy, it just doesn't work that way in a hybrid system. You have to know your options and apply them appropriately.

    Read the article

  • After startup, display reverts to one desktop duplicated on both screens

    - by Skilldrick
    I have a Samsung R530 laptop. I'm actually running Linux Mint, which is based on Ubuntu (which is why I thought it would be OK to post this here). I'm now getting exactly the same problem on Ubuntu 10.10. I've got it setup with a secondary LCD monitor, and I've changed the display settings so the laptop screen and monitor are at optimal resolution, with the desktop shared between them. After startup though (typically around 10-30 seconds) the display reverts to 1024 x 768 on both screens, and the display is duplicated (i.e. both screens show the same thing). I think this is something to do with my video card, as I had the same problem when I was running Arch Linux. Any ideas? Edit: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller It seems it's Intel, not Nvidia. I have a current work around, which is to have a launcher to a script containing xrandr --output LVDS1 --mode 1366x768 --output HDMI1 --mode 1280x1024 --left-of LVDS1 on my desktop, and to run it after the displays revert, but it's not ideal.

    Read the article

  • How to generate SPMetal for a specific list (OOTB: like tasks or contacts) with custom columns

    - by KunaalKapoor
    SPMetal is used to make use of LINQ on a list in SharePoint 2010. By default when you generate SPMetal on a site you will get a code generated file for most of the lists and probably more. Here is a MSDN link for some info on SPMetal.http://msdn.microsoft.com/en-us/library/ee538255(office.14).aspxBut what if you want only to generate the code for one list?Well it is quite simple once you figure it out. You need to add an xml file to override the default settings of SPMetal and specify it in the /parameters option. I will show you how to do this.First create a Folder that will contain two files (GenerateSPMetalCode.bat and SPMetal.xml).Below is the content of the files:GenerateSPMetalCode.bat "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\SPMetal" /web:http://YourServer /code:OutPutFileName.cs /language:csharp /parameters:SPMetal.xml pause SPMetal.xml <?xml version="1.0" encoding="utf-8"?> <Web AccessModifier="Internal" xmlns="http://schemas.microsoft.com/SharePoint/2009/spmetal"> <List Name="ListName"> <ContentType Name="ContentTypeName" Class="GeneratedClassName" /> </List> <ExcludeOtherLists></ExcludeOtherLists> </Web> You will have to change some of the text in the files so that it will be specific to your SharePoint Server Setup. In the bat file you will have to change http://YourServer to the url of the web where your list is. In the SPMetal.xml file you need to change ListName to the name of your list and the ContentTypeName to the name of the content type you want to extract. The GeneratedClassName can be anything but perhaps you should rename it to something more sensible.Adding the following line: '<List Name="ListName"><ContentType Name="ContentTypeName" Class="GeneratedClassName" /> </List>'  makes sure that any custom columns added to an OOTB list like contacts or tasks are also generated, which are missed out in a regular generation.So now when you run it the SPMetal command will read the SPMetal.xml list and override its commands. ExcludeOtherLists element makes it so that only the code for the lists you specify will be generated. For some reason I got an error if I had this element above the List element.You sould now have a code file called OutPutFileName.cs that has been generated. You can now put this in your SharePoint project for use with your LINQ queries against that list.I will soon write a LINQ example that uses the generated class. UPDATE: Add the /namespace parameter to add a namespace to the generated code. "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\SPMetal" /web:http://YourServer /namespace:MySPMetalNameSpace /code:OutPutFileName.cs /language:csharp /parameters:SPMetal.xml

    Read the article

  • HOW TO: Change Internet Expenses Cost Center Prompt

    - by rveliche
    The cost center segment on the General Information page in Oracle Internet Expenses derives its label from the Prompt entered on the KFF setup. Changing this is not possible with the simple personalization, the details below provide the instructions to change the Prompt. Create a custom class, I call it CustomHeaderKffCO.java in the package oracle.apps.ap.oie.entry.header.webui  (or any other). This class will have to extend from oracle.apps.ap.oie.entry.header.webui.HeaderKffCO. Add the following logic to your custom class. package oracle.apps.ap.oie.entry.header.webui; import oracle.apps.fnd.framework.webui.OAPageContext; import oracle.apps.fnd.framework.webui.beans.OAWebBean; import oracle.apps.fnd.framework.webui.beans.message.OAMessageLayoutBean; import oracle.apps.fnd.framework.webui.OAControllerImpl; public class CustomHeaderKffCO extends HeaderKffCO {   public void processRequest(OAPageContext pageContext, OAWebBean webBean)   {      super.processRequest(pageContext, webBean);     OAMessageLayoutBean layoutBean = (OAMessageLayoutBean) webBean.findChildRecursive("KffSEGMENT2MessageLayout");    if(layoutBean != null)   {     // You should use messages/lookups to avoid translation issues.     layoutBean.setLabel("Cost Center");   }   } } KffSEGMENT2MessageLayout is for illustration only, my Chart Of Accounts has SEGMENT2 as the cost center segment. Please change this to a segment being used eg.Segment6 should be KFFSEGMENT6MessageLayout Note that super.processRequest(pageContext, webBean); is a must and should always be the first statement. Once the class is compiled, copy the class to an appropriate directory, in my case I used $JAVA_TOP/oracle/apps/ap/oie/entry/header/webui. Navigate to the General Information page, click on "Personalize General Information Page".Click on Personalize icon next to Message Component Layout: (OIEGeneralInformationMsgCLayout)In the controller class section update the new controller at the appropriate levelIf the Link "Personalize General Information Page" is not visible on your instance, check your personalization profiles.

    Read the article

  • Hierachies....from the Top Down

    - by Joe G
    I've been struggling with how to write on the topic of the importance of hierarchy design.  It's not so much that hierarchies haven't always been important, it's more of that with Fusion, the timing of when the hierarchies are designed should take a higher priority.    I will attempt to explain..... When I was implementing applications, back in the day, we had the list of detailed account values to enter with the obvious parent accounts. Then, after the setup was complete and things were functioning, the reporting phase started.  Users explained the elements that they want on the reports, what totals should be included, and how things should be compared.  Frequently, there was at least one calculation that became a nightmare either because it was based on very specific things that didn't relate to anything else or because it was "hardcoded" so that when something changed, someone need to "fix" the report. With Fusion, the process changes slightly.  You still want to enter all of the detailed accounts, but before you start adding parent values, you should investigate the reporting requirements from the top-down.  It's better to build hierarchies based on the reporting requirements than it is to build reports based on random hierarchies. Build reports based on hierarchies that resemble the reports themselves, and maintain the hierarchies without rework of the reports. For example, if you look at an income statement, you may have line items for Material Costs, Employee Costs, Travel & Entertainment, and Total Operating Expenses.  In your hierarchy, you have detail values that roll up to Material Costs, Employee Costs, and Travel & Entertainment which roll up to Total Operating Expenses. Balances are stored automatically in the cube for each of these.  When you define the report, you pick each of these members - no calculations required.  If a new detail value is added, you simply add it to the hierarchy, and there is no need to modify the report. I realize that there are always exceptions that require special handling, but I am confident that you will end up with much fewer exceptions if you make reporting a priority and design your hierarchies from the top-down.

    Read the article

< Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >