Search Results

Search found 47432 results on 1898 pages for 'database link'.

Page 492/1898 | < Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >

• Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

  - by Korakys

  Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

  Read the article

• Mirroring: what happens if principal loses contact with both mirror and wittness?

  - by TiborKaraszi

  Imagine a database mirroring setup where you have two LANs with a WAN link in between. Let's call them site A and site B. Say that principal is currently in site A, and both mirror and witness are in site B. I.e., we are running database mirroring with a witness, and assuming we are running safety FULL (synchronous), we have auto-fail over. Now, what is really fail over when it comes to mirroring? the simple answer is that the mirror will finish the recovery process (UNDO) and make the database available....(read more)

  Read the article

• Get script for every action in SQL Server Management Studio

  I am always conscious to keep a record of all operations performed on my database servers. Operations through T-SQL in an SSMS query pane can easily be saved in query files. For table modifications through SSMS designer I have predefined setting to generate T-SQL scripts. However there are numerous database and server level tasks that I use the SSMS GUI and I would like to have a script of these changes for later reference. Examples of such actions through the SSMS GUI are backup/restore, changing compatibility level of a database, manipulating permissions, dealing with database or log files or creating/manipulating any login/user. I am looking for any way to generate T-SQL code for such actions, so that it may be kept for later reference

  Read the article

• Remote connection to Mysql not working

  - by Fillipe Silva

  We have an application running with CodeIgniter and MySQL in cestacerta.com. Ther are two versions: One that is in production and it works perfectly, and one that is our Development version. This runs locally on my machine and the other developers. The development version needs to remotely connect to the database, and it rather suddenly stopped working. I've given permission to access any IP settings on the server. I can access the database through the MySQL Gui Tools. I have tested access to several different codes, including a newly downloaded version of CodeIgniter and always got the same error: "A Database Error Occurred Unable to connect to your database server using the provided settings. Filename: C: \ xampp \ htdocs \ cestacerta \ system \ database \ DB_driver.php Line Number: 119 " What troubleshooting steps can I take determine if the error is on our workstations (which all have the same error) or on our server.

  Read the article

• Full/Differential backup - what's used to determine the differential backup content?

  - by gernblandston

  Let's say I have a 'MyDB' SQL Server 2005 database (simple recovery) in which I do a Full backup on Sunday, and Differentials every other night BACKUP DATABASE [MyDB] TO DISK = N'c:\Database Backups\MyDB\MyDB_Full.bak' WITH NOFORMAT, INIT, NAME = N'MyDB.BAK', SKIP, NOREWIND, NOUNLOAD, STATS = 10 and BACKUP DATABASE [MyDB] TO DISK = N'c:\Database Backups\MyDB\MyDB_Diff.bak' WITH NOINIT, DIFFERENTIAL, NAME= 'MyDB.BAK', STATS= 10 What does the differential backup process use to decide what data gets backed up on the differential nights? Does it need the mydb_full.bak file to do its business? If I wanted to save disk space, could I zip up the mydb_full.bak file to a .zip file after it's created without adversely affecting the differential backups, and if I needed to restore, just unzip the full backup before starting?

  Read the article

• Can I ping via an arbitrary interface of a DD-WRT system? [migrated]

  - by bytebuster

  There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

  Read the article

• Maximise network transfer speed of various applications

  - by Alex

  When using nc, scp, wget to transfer files between 2 machines on a dedicated 2Mbps link, I get speeds between 0.5 and 1 Mbps. However, when I use iperf -c 10.0.1.4 -t 20 -P 12 (for example) I can maximise the speed of the link (getting stable 2Mbps). Is there a way to make single stream transfers (such as those done by scp) to utilise all/most of the link? Some kind of tcp settings, or iptables...?

  Read the article

• Is there a way of disabled byte-range requests in Apache?

  - by Sam Minnée

  I have a web page with a link to a PDF file (target="_blank"). If I click the link, the PDF reader just shows a grey screen within the Firefox browser. If I copy that link and manually open it in a new tab, the PDF will display correctly, and subsequent requests made by clicking the original link now work, suggesting that the problem occurs when loading the file into the cache. It appears as though the Adobe PDF reader plugin is making byte-range requests (I see lots of 206 responses) and I suspect that this may be the cause of the issue. I am running an Apache webserver. Has anyone had problems with Apache and Adobe's byte-range requests? Are there any workarounds? Perhaps a way of configuring Apache to ignore byte-range requests on PDFs?

  Read the article

• How to wipe the slate clean on an Oracle installation?

  - by nw

  After a basic, successful installation of Oracle 11g, I ran dbca again to enable Enterprise Manager on my database. The operation hung at around 67% for half an hour or more, so I clicked Stop to abort the operation. Things seemed to wrap up cleanly, EM was working, all was well with the world. Then I started getting this dreaded error upon any attempt to connect in SQL*Plus: ORA-12154: TNS:could not resolve the connect identifier specified I thought perhaps the database had been corrupted due to the earlier aborted operation, so I ran dbca again and deleted the database. Then I attempted to create a new database in its stead, using a clone of the template created the first time around. Unfortunately, the clone database operation fails at 50% with the exact same error: ORA-12154: TNS:could not resolve the connect identifier specified How can I clean up the mess I have created, short of reinstalling Oracle entirely from scratch?

  Read the article

• Azure website that talks to third party services

  - by Andy Frank

  I have website that crawls data from many third party services when user browse to webpage. This can be really slow because I hit third party server and process returned data before showing it to user. I am hosting website on Azure (shared mode). I am thinking to improve my implementation. Here is what I am thinking... Run a service that crawls data from third party services, process it and then store it in database. when user browse to my site, my site pulls data from database and display them to user. But above solution is not clear to me. Should I have normal service or wcf service? If wcf service then should website talk to database or wcf service (that can access data from database)? If normal service then how can I deploy on Azure?

  Read the article

• Route web browsing through a separate iterface

  - by tkane

  I'd like to route web browsing through the wlan0 interface and the rest through eth1. Can you please help me with the iptables commands to achieve this. Below is my configuration. Thank you :) Edit: This is about desktop configuration not a web server set up. Basically I want to use one of my connections to browse the web and the other one for everything else. ifconfig: eth1 Link encap:Ethernet HWaddr 00:1d:09:59:80:70 inet addr:192.168.2.164 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::21d:9ff:fe59:8070/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:33 errors:0 dropped:0 overruns:0 frame:0 TX packets:41 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4771 (4.7 KB) TX bytes:7081 (7.0 KB) Interrupt:17 wlan0 Link encap:Ethernet HWaddr 00:1c:bf:90:8a:6d inet addr:192.168.1.70 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:bfff:fe90:8a6d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:77 errors:0 dropped:0 overruns:0 frame:0 TX packets:102 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14256 (14.2 KB) TX bytes:14764 (14.7 KB) route: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 * 255.255.255.0 U 1 0 0 eth1 192.168.1.0 * 255.255.255.0 U 2 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 default adsl 0.0.0.0 UG 0 0 0 eth1

  Read the article

• How do I decide to which class a method should belong

  - by Eleeist

  I have TopicBusiness.class and PostBusiness.class. I have no problem with deciding into which class methods such as addPostToDatabase() or getAllPostsFromDatabase() should go. But what about getAllPostsFromTopic(TopicEntity topic) or getNumberOfPostsInTopic(TopicEntity topic)? Should the parameter be the deciding factor? So when the method takes TopicEntity as parameter it should belong to TopicBusiness.class? I am quite puzzled by this. EDIT: Some more info as requested. TopicBusiness.class and PostBusiness.class are classes holding all the business logic of the application concerning topics and posts respectively - that is fetching the data from database and/or performing some operations on them. TopicEntity is data (in this case representing single topic) fetched from database. getAllPostFromTopic(TopicEntity topic) gets all posts from database that belong to particular topic, while getNumberOfPostsInTopic(TopicEntity topic) performs database query and returns the number of posts that topic passed as parameter consists of.

  Read the article

• NoSQL CouchDB Getting Stable with New Release

  <b>Database Journal:</b> "The open source Apache CouchDB database project hit a major milestone this week with the release of version 0.11. The release is an important one for the NoSQL database variant as it matures toward its 1.0 release."

  Read the article

• DBCC CHECKDB Fails Displaying 8914 Error

  MS SQL Server database user might encounter database corruption issues due to improper system shutdown, metadata structure damage, human mistake, and virus infection. In most situations of database c... [Author: Mark Willium - Computers and Internet - May 14, 2010]

  Read the article

• QR Codes and Short Links - Please Take A Look [closed]

  - by Joe Turner

  I'm looking for a way to create a QR Code and a shortened link when a form is submitted. I have the QR Code bit, but the link is too long for me and the QR Code looks scary and complicated. The way it works is; the user types in (in this instance) a contract number. Then, a folder is created on the server of that contract number. (www.mysite.com/QR/$contractnumber). Then, using PHP again, I create a QR Code through Google because I know that every QR code will be linking to the same place, just a different ending of the link. The only bit that changes is the $POST... I was wondering if there was a way to shorten the link before it goes to Google? It would have to be through php. The user enters the contact number in the form, then that number(usually around 5/6 digits) will be entered into a already existing command? I'm not an expert in anything, I just know some really random snippets of code... And HTML and CSS, of course. Any help would be appreciated and judging by the few days I have been searching this, I think it might help a few people in the future. I would also like to confirm that the solution can't be one of this visual URLShorteners. If it is, it just needs to be the back-end of it, built into a existing form and QR Generator. Simple?

  Read the article

• Mailing list with dynamically generated addresses

  - by Joe Tomasone

  I am trying to implement a dynamic mailing list from a database that changes quite often. Conditions: Postfix is the MTA Email addresses are in a MySql Database Postfix only allows senders whose emails are in that database (via smtpd_sender_restrictions) Cron job extracts the current emails from the database nightly and puts them into an alias file, then runs postalias on it. This works well, but since the sender remains the same, many domains are rejecting the email since my server is not a DNS listed mail server for the sender's domain. So, I either have to find a way to re-write the outgoing address as "listserv@mydomain" or find some mailing list package that will use database-retrieved emails (either queried directly or in a flat file) as the subscriber list, with that list replaced daily. I've tried Sympa and am pretty much ready to give up on it - it's a nightmare to get working right - but that's the only open source listserver that I have seen that works with dynamic mail lists. Does anyone have any ideas? Thanks, Joe

  Read the article

• How to save results of a procedure with more than one result set

  Sometimes a procedure returns more than 1 result set. The article describes how to save all result sets into new database tables Keep your database and application development in syncSQL Connect is a Visual Studio add-in that brings your databases into your solution. It then makes it easy to keep your database in sync, and commit to your existing source control system. Find out more.

  Read the article

• Why is my HDD going back from standy?

  - by Pablo

  My hard drives, connected to Ubuntu server are producing the following log every exactly 5 minutes. Nov 1 14:10:50 localhost kernel: [ 1602.884936] ata2.00: hard resetting link Nov 1 14:10:51 localhost kernel: [ 1603.226804] ata2.01: hard resetting link Nov 1 14:10:52 localhost kernel: [ 1604.274533] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 1 14:10:52 localhost kernel: [ 1604.274548] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 1 14:10:52 localhost kernel: [ 1604.356669] ata2.00: configured for UDMA/133 Nov 1 14:10:52 localhost kernel: [ 1604.375247] ata2.01: configured for UDMA/133 Nov 1 14:10:52 localhost kernel: [ 1604.375265] ata2: EH complete I don't think this is related to hard drive failure, because it happens for ALL hard drives connected and ONLY when I write spindown_time = 12 in /etc/hdparm.conf. The reason I add this value is to put disks into standby mode after 60 seconds, which is happening after that period (checked with hdparm -C). The first clue I thought that smartd was running and spinning the drive. However, I couldn't find it in ps -aux | grep smart. Additionally, iostat does show that nobody accessed those drives, since Blk_read, Blk_wrtn remain unchanged. I also killed all processes that may be doing something with hdd(eg SAMBA). So I guess the problem is solely with hdparm... I have no more clue where that 5 minute value hides.

  Read the article

• TechEd 2014 Day 3

  - by John Paul Cook

  There is some confusion about durability of data stored in SQL Server in-memory tables, so some review of the concepts is appropriate. The in-memory option is enabled at the database level. Enabling it at the database level only gives you the option to specify the in-memory feature on a table by table basis. No existing tables or new tables will by default become in-memory tables when you enable the feature at the database level. If you choose to make a table an in-memory table, by default it is...(read more)

  Read the article

• Top 10 MySQL GUI Tools

  Many third parties create rich applications to facilitate database management, database development and database administration. Here are ten outstanding graphical interfaces for MySQL.

  Read the article

• Top 10 MySQL GUI Tools

  Many third parties create rich applications to facilitate database management, database development and database administration. Here are ten outstanding graphical interfaces for MySQL.

  Read the article

• What to do with DATETIMEOFFSET?

  - by GavinPayneUK

  Someone asked me today if the time zone of a specific instance of SQL Server could be changed to match the country which that instance served. Some database products allow you to set this at an engine level which made me wonder if your data’s time fields “move” with the time zone setting of the database server instance?  If something was logged as happening at 9am Paris time it happened then, if I change my database server parameters did that event now happen at 9am New York time?  Perhaps...(read more)

  Read the article

• Facebook contest policy no-no?

  - by Fred

  I would like to post a link on a Facebook page where it will exit Facebook entirely and go to a client's website, where people will be on a page (client's) where they can enter their e-mail address to be entered in a temporary database file with rules and disclosures etc., for a draw once the number of entries reaches 100 for instance. Once the number of entries reaches 100, a random winner is picked and notified via E-mail. The functionality is as follows: A link is place on a Facebook page leading to an external page The page is a form to merely enter their email address for a contest The email is placed in a temporary file An automatic E-mail is sent to the address used for confirmation using SHAH-256 hash The person receives the Email saying something to the affect "Please confirm your Email address etc. - If you did not authorize this, simply ignore this message and no further action will be taken". If the person clicks on the confirmation link, the Email is then stored in the database and the person is again notified saying "Thank you for signing up etc." Once others do the same process and the database reaches a certain number, the form is no longer accessible and automatically picks a random Email. Once picked, an Email is automatically sent to the winner stating the instructions, and notifying me also. Once that person clicks yet another confirmation link, the database is then automatically deleted. I have built this myself and have no intentions of breaking any rules, nor jeopardize the work/time/energy I have put into this project. Is this allowed?

  Read the article

• SQL binary value to PHP variable leading zeros

  - by Agony

  Using sql query to pull data from a mssql database results in a value that still has leading zeros. The data in database is stored as binary(13) - so it will pull all 13 digits. However the value is a text, so any leading zeros will generally show up as '?' in a form on the site - and in return will update wrong data to the database later. So what i need is to only select/display the text itself, not all 13 bytes. using: SELECT CONVERT(char,uilock_pw) AS uipwd FROM tbl_UserAccount or SELECT uilock_pw FROM tbl_UserAccount still adds the leading zeros to the char array. Example in database: 0x71776531323300000000000000 Would show up as: qwe123??????? But should be: qwe123 Im not even sure what character those ? represent. Using Echo results in a normal qwe123 - but not in a form.

  Read the article

• How to change the setting for a network device reported by ethtool, specifically Speed, on VM?

  - by Ramadheer Singh

  This is related to these two questions, although they don't answer my question. The machines are RHEL6. 1.ethtool not showing all the properties 2.changing network speed to 1000Mb/s Output on VM: [root@foo ~]# ethtool eth0 Settings for eth0: Current message level: 0x00000007 (7) Link detected: yes Output on Real Hardware: (interested in Speed) # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes ***Speed: 1000Mb/s*** Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: d Wake-on: d Link detected: yes if there's anyway I can set this in VM, please suggest.

  Read the article

< Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >