Search Results

Search found 15487 results on 620 pages for 'android wireless'.

Page 494/620 | < Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >

  • Network connection on an Acer Aspire 5253?

    - by fuquam
    Brand new to Ubuntu and PCs for that matter. I've been a Mac user all my life but wanted to try Ubuntu on the cheap, so I bought an Acer Laptop 5253-BZ893 and i got Ubuntu 10.10 installed with no problem. The only problem i have is, that i get no network connection options, wired or wireless. I just get No Network Devices Available. The computer came with Windows 7 installed and i am able to connect to my wireless network fine using Windows, so i know the computer works. Also i've been searching forums and google for hours trying to figure out why I can't get a network connection in Ubuntu but so far no luck. Any suggestions? Thanks in advance.

    Read the article

  • Disabling eth0 Module on a Macbook Aluminum

    - by user115488
    The Ubuntu page for my device states the following at the bottom (Known Issues) PowerTOP reports that the module for the 10/100/1000 interface wakes the processor 100+x/sec, accounting for 50% of wakeups on an idle system. This dramatically shortens battery life. One potential solution is to unload this module if you only use wireless. I only use wireless, but I could not find instructions to "unload the module". I have a feeling if I try something related to this, but not the same, battery life will not improve and my eth0 won't work. Anyone have a good guide on this?

    Read the article

  • Wired connection not being recognized

    - by maxifick
    I'm on Ubuntu Maverick (10.10). I've read a few threads regarding wired connection problems, but haven't found a solution yet. The problem appears after I connect to a wireless network. When I disconnect wireless and plug in an internet cable, the wired connection is not recognized at all. Even the socket appears dead (there are no diodes flashing). The only solution so far seems to be restarting the computer. Network Manager then tries to connect to a Wi-Fi, but the wired connection is listed and working. I've tried sudo restart network-manager, but that doesn't solve anything. After a while, available wireless networks start appearing, but the wired still doesn't. Any ideas? Thanks in advance. Edit: Here is the dmesg output after switching off Wi-Fi and then plugging the internet cable. [18200.623543] Restarting tasks ... done. [18200.648422] video LNXVIDEO:00: Restoring backlight state [18200.707580] sky2 0000:02:00.0: eth0: phy I/O error [18200.707715] sky2 0000:02:00.0: eth0: phy I/O error [18200.707819] sky2 0000:02:00.0: eth0: phy I/O error [18200.707922] sky2 0000:02:00.0: eth0: phy I/O error [18200.708025] sky2 0000:02:00.0: eth0: phy I/O error [18200.708127] sky2 0000:02:00.0: eth0: phy I/O error [18200.708229] sky2 0000:02:00.0: eth0: phy I/O error [18200.708332] sky2 0000:02:00.0: eth0: phy I/O error [18200.708824] sky2 0000:02:00.0: eth0: enabling interface [18200.709587] ADDRCONF(NETDEV_UP): eth0: link is not ready [18202.662422] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18203.324061] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [18211.193137] eth1: no IPv6 routers present [18212.844649] usb 5-1: new low speed USB device using ohci_hcd and address 5 [18213.017235] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input16 [18213.017499] generic-usb 0003:0461:4D17.0004: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0 After system restart, dmesg says this: [ 19.802126] sky2 0000:02:00.0: eth0: enabling interface [ 19.802394] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.812533] device eth0 entered promiscuous mode [ 21.495547] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.495677] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 21.496574] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

    Read the article

  • Ask The Readers: What’s Your Favorite Co-Op Game?

    - by Jason Fitzpatrick
    For many readers, the weather is getting chillier and that means more time indoors. What better time to take a look at the best co-op games around? Jump in and put in a nod for your favorite game and setup. Wallpaper available here. Whether you’re playing DS-to-DS with your spouse, inviting all your buddies over for a whole-house LAN fest, or couch co-op’ing through your favorite RPG, we want to hear all about your favorite games and the ways you play them. Sound off in the comments with your co-op tips and tricks; make sure to check back in on Friday for the What You Said roundup to find some new titles to tide you over until the warm weather comes around again. How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems 7 Ways To Free Up Hard Disk Space On Windows

    Read the article

  • How do I find out which driver a piece of hardware is using?

    - by Oli
    Today I'm trying to figure out which driver is best for my USB wireless dongle. Everywhere I look I just see Ralink STA but this isn't telling me which module this actually is. I'm sure there's a way of looking it up but the computer should be able to tell me, shouldn't it? Meta: This question is open to any piece of hardware, not just my wireless card. It would be helpful if we had a thread of useful diagnostic procedures so that other people can find out what's going on with their hardware.

    Read the article

  • How do I disable the upgrade to new version warning? [duplicate]

    - by Anatoliy
    This question already has an answer here: Disable Ubuntu Update Manager's new version warning 2 answers After I allowed Ubuntu on my notebook to upgrade to 13.4, it lost Wi-Fi connection. Network menu does not show wireless access points, but according to syslog it establishes connection. Also, the wireless router provides IP address to the host. I don't want to spend time on debugging and solving the problem that most probably will reappear with new update, so I decided to reinstall 12.10 version. It recognized Broadcom Wi-Fi modem right after the boot, and everything went great, until today I powered it on and suddenly found that it is running 13.4 and all my problems are back! Is it possible to instruct it to stay with 12.10 until I decide to upgrade?

    Read the article

  • Laptop Hibernates after adapter is unplugged

    - by SpyrosR
    Hello i am experiencing a strange problem under Ubuntu 12.04. If I unplug the charger while my laptop is on,i don't see any messages but my laptop goes straight into a suspend or hibernate mode and it's a real pain to get it stable again afterwards. It always suspends (or hibernates) It always takes 2 attempts to restart it (press power button, it starts and it hibernates again, press power button and it starts and stays on) It sometimes has an effect on the wireless which doesn't come back clean and i either have to switch the wireless on and off a couple of times. I sometimes have to restart the laptop totally Is anyone else experiencing the same issues and if yes,is there any solution? Thank you in advance.

    Read the article

  • What if &ldquo;Microsoft&rdquo; were in our shoes? About Windows Phone

    - by Vijaya Malla
    This is what I think about Microsoft Windows Phone. If Microsoft were in our shoes looking at various phones available their configurations, memory, front facing cameras etc. Microsoft disappointed the USA customer base again by not getting Nokia Lumia 800. The Past: If we talk few years ago, few business people were on their Blackberry’s and few Gadget lovers were on crappy Windows OS devices. The world was all going right till Apple came with a revolutionary device iPhone, which completely changed our perception towards phone and how great a smartphone can be. It’s not just phone but the whole technology industry. The romantic appealing of the phone and smooth touch and feel of it made everyone to get one of those bad boys. The sales went up for not just Apple for AT&T too. Even though everyone complained about the signal strength of AT&T, everyone wanted to be on it because they have iPhones. All world wanted iPhone back then except Microsoft with few comments on how it is not going to be in market. But it did great and rocked the industry. A few years later with iPhone and Android taking over the smartphone market Microsoft realized that it should be in the game too. Worked on the design of it, and gave us the best Mobile OS ever. Everyone thinks that iOS is a great OS for phones but if you have touched a Windows Phone and use it for real then you will realize the strengths of it. so last year we welcomed Windows Phone 7 The Present : Windows Phone 7 has the fastest growing market. The phones are cheap, you can buy from any carrier out there. The phone became smarter and smarter with the recent update “Mango (7.5)” and with the collaboration with Nokia, Microsoft created a new eco-system for smartphones with the best smartphone hardware and best smartphone software. Everyone in the world was excited about the collaboration. As we fly over cloud 9 imagining about Nokia made Windows Phones we all heard a good news from Nokia “Nokia World”. Nokia showed the world what a best hardware making company can do with Windows Phone 7.5 OS. Nokia Lumia 800 and 710 took the spotlight. Everyone here in USA and all over the world wanted to own a Nokia Lumia 800 because of the design, software, proprietary apps from Nokia (maps, ESPN, drive and music). If USA market had Nokia Lumia 800, then it would have been the best step Microsoft and Nokia had ever made in their history of smartphone market. With all the numbers going to Android and IPhone, its not clear on why Microsoft/Nokia did not release Lumia 800 here in USA. Its unclear if Microsoft had learnt the lesson or not. if it had learnt the lesson I guess Microsoft needs to get the Nokia Lumia 800 to the USA. The Future: This is where we hope we get the best form Microsoft. I was an iPhone user, I used 2G, 3G, 3GS, 4 and then moved to Windows Phone and never felt so happy with my iPhones’. From the day when Nokia announced the partnership with Microsoft and said that they going to come up with a new Nokia windows phone, I was dreaming for my Nokia Phone. but looks like it is not going to happen any time soon. My thoughts about the Market :  Nokia has the biggest market base in the world. Even though people moved to Android or iPhone over the years in other parts of the world like India and China, people still love to use Nokia. Everyone who uses a Windows Phone now will wait for that day when Nokia Lumia comes to the USA but what either or both of the companies should do for a better market share is to make a very aggressive move with the hardware and bet on the devices. I am pretty sure that it will work. everyone here in the USA will like to have a dual core windows phone with front facing camera and all other crazy things that android/apple phones offer. I think we just have to wait for that day and hope that day comes soon. Love Microsoft and Nokia Thank you for reading.

    Read the article

  • How to future-proof my touch-enabled web application?

    - by Rice Flour Cookies
    I recently went out and purchased a touch-screen monitor with the intention of learning how to program touch-enabled web applications. I had reviewed the MDN documentation about touch events, as well as the W3C specification. To get started, I wrote a very short test page with two event handlers: one for the mousedown event and one for the touchstart event. I fired up the web page in IE and touched the document and found that only the mousedown event fired. I saw the same behavior with Firefox, only to find out later that Firefox can be set to enable the touchstart event using about:config. When touch events are enabled, the touchstart event fires, but not mousedown. Chrome was even stranger: it fired both events when I touched the document: touchstart and mousedown, in that order. Only on my Android phone does it appear to be the case that only the touchstart event fires when I touch the document. I did a a Google search and ended up on two interesting pages. First, I found the page on CanIUse for touch events: http://caniuse.com/#feat=touch Can I Use clearly indicates that IE does not support touch events as of this writing, and Firefox only supports touch events if they are manually enabled. Furthermore, all four browsers I mentioned treat the touch in a completely different way. It boils down to this: IE: simulated mouse click Firefox with touch disabled: simulated mouse click Firefox with touch enabled: touch event Chrome: touch event and simulated mouse click Android: touch event What is more frustrating is that Google also found a Microsoft page called RethinkIE. RethinkIE brags about touch support in IE; as a matter of fact, one of their slogans is "Touch the Web". It links to a number of touch-based application. I followed some of these links, and as best I can tell, it's just like CanIUse described; no proper touch support; just simulated mouse clicks. The MDN (https://developer.mozilla.org/en-US/docs/Web/API/Touch) and W3C (http://www.w3.org/TR/touch-events/) documentation describe a far richer interface; an interface that doesn't just simulate mouse clicks, but keeps track of multiple touches at once, the contact area, rotation, and force of each touch, and unique identifiers for each touch so that they can be tracked individually. I don't see how simulated mouse clicks can ever touch the above described functionality, which, once again, is part of the W3C specification, although it is listed as "non-normative", meaning that a browser can claim to be standards-compliant without implementing it. (Why bother making it part of the standard, then?) What motivated my research is that I've written an HTML5 application that doesn't work on Android because Android doesn't fire mouse events. I'm now afraid to try to implement touch for my application because the browsers all behave so differently. I imagine that at some time in the future, the browsers might start handling touch similarly, but how can I tell how they might be handled in the future short of writing code to handle the behavior of each individual browser? Is it possible to write code today that will work with touch-enabled browsers for years to come? If so, how?

    Read the article

  • Motorola Droid App Recommendations

    - by Brian Jackett
    Just as a disclaimer, the views and opinions expressed in this post are solely my own and I’m not getting paid or compensated for anything.     Ok, so I’m one of the crazy few who went out and bought a Droid the week it was released a few months back.  The Motorola Droid was a MAJOR upgrade in phone capabilities for me as my previous phone had no GPS, no web access, limited apps, etc.  I now use my Droid for so much of my life from work to personal to community based events.  Since I’ve been using my Droid for awhile, a number of friends (@toddklindt, @spmcdonough, @jfroushiii, and many more) who later got a Droid asked me which apps I recommended.  While there are a few sites on the web listing out useful Android apps, here’s my quick list (with a few updates since first put together.) Note: * denotes a highly recommended app     Android App Recommendations for Motorola Droid (Updated after 2.1 update) RemoteDroid – install a thin client on another computer and Droid becomes mouse pad / keyboard, control computer remotely PdaNet – free version allows tethering (only to HTTP, no HTTPS) without paying extra monthly charge.  A paid version allows HTTPS access. SportsTap – keep track of about a dozen sports, favorite teams, etc *Movies – setup favorite theaters, find movie times, buy tickets, etc WeatherBug elite – paid app, but gives weather alerts, 4 day forecast, etc.  Free version also exists.  (Update: Android 2.1 offers free weather app, but I still prefer WeatherBug.) *Advanced Task Killer – manually free up memory and kill apps not needed Google Voice – have to have a Google Voice account to really use, but allows visual voice mail, sending calls to specific phones, and too many other things to list AndroZip – access your phone memory like a file system Twidroid – best Twitter client I’ve found so far, but personal preference varies.  I’m using free version and suits me just fine. Skype (beta) – I only use this to send chat messages, not sure how/if phone calls works on this. (Update: Skype Mobile app just released, but uninstalled after few days as it kept launching in background and using up memory when not wanted.) *NewsRob – RSS reader syncs to Google Reader.  I use this multiple times a day, excellent app. (Update: this app does ask for your Google username and password, so security minded folks be cautioned.) ConnectBot – don’t use often myself, but allows SSH into remote computer.  Great if you have a need for remote manage server. Speed Test – same as the online website, allows finding upload/download speeds. WiFinder – store wifi preferences and find wifi spots in area. TagReader – simple Microsoft Tag Reader, works great. *Google Listen – audible podcast catcher that allows putting items into a queue, sync with Google Reader RSS, etc. I personally love this app which has now replaced the iPod I used to use in my car, but have heard mixed reviews from others. Robo Defense – (paid app) tower defense game but with RPG elements to upgrade towers over lifetime playing. I’ve never played FieldRunners but I’m told very similar in offering. Nice distraction when in airport or have some time to burn. Phit Droid 3rd Edition – drag and drop block shapes into a rectangle box, simple game to pass the time with literally 1000s of levels. Note this game has been updated dozens of times with numerous editions so unsure exactly which are still on the market. Google Sky Map – impress your friends by holding Droid up to sky and viewing constellations using Droid screen. wootCheck Lite – check up on daily offerings on Woot.com and affiliated wine, sellout, shirt, and kids sites.   Side notes: I’ve seen that Glympse and TripIt have recently come out with Android apps.  I’ve installed but haven’t gotten to use either yet, but I hear good things.  Will try out on 2 upcoming trips in May and update with impressions.         -Frog Out   Image linked from http://images.tolmol.com/images/grpimages/200910191814100_motorola-droid.gif

    Read the article

  • MS NPS denying access, can't validate server certificate

    - by Fred Weston
    At my office we use a Cisco WLC2504 wireless controller and starting about a week ago we started having problems with users connecting to one of our secure wireless network. We are running AD on Windows Server 2008 R2 and use network policy server to control access to our wireless network. When I look at the logs in event viewer after a failed connection attempt I see an access reject message: Reason Code: 262 Reason: The supplied message is incomplete. The signature was not verified. Looking this up on Google I found this article: http://support.microsoft.com/kb/838502 I tried disabling server certificate validation on my computer and as soon as I did that I was able to connect to the network, so it seems that there is some sort of certificate validation issue. I'm not sure which certificate is unable to be validated or how to fix it. This used to work and stopped suddenly by itself so I am thinking a certificate may have expired. When I go to NPS Policies Network Policies My policy Constraints Auth methods Microsoft PEAP and view the properties, the certificae specified here expires in 2016, so doesn't seem as though this could be the problem. Any suggestions on how to troubleshoot this issue?

    Read the article

  • Configuring default gateway returned by dhcp server

    - by comp1mp
    Hello, I have a machine which connects via ethernet to a private LAN, and wireless to a network which provides internet connectivity. The private LAN uses a wireless router to perform DHCP. The problem is that the wireless and NIC adapters have different default gateways. The default gateway for the private LAN has a lower adapter metric, and is thus chosen by the routing algorithm. I am thus unable to browse the internet when connected to both adapters. The following link has a solution for manually setting the adapter metric to a high number. http://superuser.com/questions/77822/how-to-tell-windows-7-to-ignore-a-default-gateway I was hoping to find a different solution. Does any one know of a router that allows you to configure its DHCP server to return an empty default gateway? I cannot find such an option for my linksys wrt300n. Configuring a static ip address with no default gateway does work, however I would like to use DHCP if possible. Does anyone know of a different way to specify a default gateway for a windows 7 machine with multiple network adapters without mucking with the adapter metric? Thanks, Matthew

    Read the article

  • pfSense Firewall or Linsys/Cisco router for small offices

    - by Tim Meers
    I'm about to start switching some networks around for multiple small offices. Each office has about 10 to 15 users and 10 to 15 computers. Each office has a spread of generic routers and access points. The routers vary from being used as routers, to just being an access point for wireless. Nothing formal has really ever beem implemented for each of the 10 offices. What I'm wanting is to set up a pfSense box for each office to configure things like: traffic shaping (for VoIP QOS) URL Filtering DHCP static routing multiple VLANs I'll then use some of the existing hardware for wireless. Maybe even integrate the wireless right into the firewall depending on the office layout. So my question, would this be better to do a full blown firewall box, or but a new business class or high end consumer class Linksys router to do the URL filtering, QOS and DHPC? Each option could allow for remote access and VPN for remote maintnance and each would only cost a nominal about of money for something decent, i.e. under $250.

    Read the article

  • How to get rid of auto-generated sequence number in network's device name in Windows?

    - by Piotr Dobrogost
    Every time one plugs in the same usb wireless adapter in a new usb port, Windows creates new network device with auto-generated sequence number which looks like this Wireless-N USB Network Adapter #2, Wireless-N USB Network Adapter #3, ... The name of a device is being displayed as part of network's information in Control Panel|Network Connections. How can I get rid of this sequence number? I found out device name which is displayed in network's information is kept in the FriendlyName REG_SZ value under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_[device specific string]\[usb port specific string] However when I try to modify this value I get error Cannot edit FriendlyName: Error writing the value's new contents. I tried to delete extra keys under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_13B1&PID_0029 but got Cannot delete KEY NAME: Error while deleting key. error. Trying to solve this problem I followed this answer but trying to change owner with Replace owner on subcontainers and objects option checked I got this error - Registry Editor could not set owner on the currently selected, or some of its subkeys. To find out which subkey is the source of problem I tried changing owner of each subkey. After successfully changing owner of Properites subkey I saw it has subkeys which were previously hidden. Now trying to change owner of these subkeys looks like this: Any idea how to delete these keys?

    Read the article

  • AirPort Express Discoverability

    - by andybjackson
    I bought an AirPort Express to enable music in a different part of a friend's house using the AirTunes feature. Unfortunately, iTunes or the AirPort Utility don't reliably discover the existence of the device. If I use the "Configure Other..." function within the AirPort Utility and enter the AirPort Express' IP address and password, then I can reliably get access in a daughter window to configure it. This seems to nudge the underlying AirPort Utility into "finding" and displaying the AirPort Express, which it doesn't do on its own even after clicking the "Rescan" button. iTunes then also seems to cotton on to this discovery and present the AiportExpress as an AirTunes option at the bottom right of iTunes. Things then works as we'd like them to. If I close down the AirPort Utility, then iTunes loses the AirPort Express AirTunes speaker, often giving "An unkown error (-15006) occurred while connecting to the remote speaker". Of course, starting the Airport Utility, forcing it to recognise the Airport Express and then starting iTunes, isn't the ease of use I was after. Background info: iTunes is running on Windows XP. The AirPort Express is running in wireless client mode (i.e. is connecting to an unsecured wireless network in the house with nothing connected to its ethernet port). The network router is a Swisscom Motorola 3347NWG (with firmware 7.8.5r1). I have already tried: Disabling the Windows XP firewall Updating the AirPort Express firmware, the AirPort Utility and the router firmware Ensuring Wireless privacy and similar potetnially problematic router settings are off Solutions, or even just ideas of other things to try would be gratefully received.

    Read the article

  • Static routing on a TP-Link TL-WR1043ND

    - by igor
    My home network setup looks like this: Both routers are TP-Link TL-WR1043ND routers. The basement router handles all devices in the house that are connected via cable, handing out addresses for the 10.89.49.0/24 network via DHCP. Wireless doesn’t really work from the basement, as the signal is too weak, so I have disabled it. To do WiFi, I have added a second (identical) router downstairs. On the WAN side it is assigned the 10.89.49.101 IP address from the basement router, and on its LAN it provides the 10.89.7.0/24 network. Basic internet access works flawlessly from any device this way. I am now facing the problem that I am not able to communicate (e.g. SSH) between all devices, wired or wireless. I am able to connect from a wireless device to a wired device, for example SSH-ing from 10.89.7.X to 10.89.49.Y, but it doesn’t work the other way round—despite the fact that I have added a static route to the basement router: Does anybody have any idea on how to solve it? Both routers have already been upgraded to use the most recent firmware from TP-Link.com (Build 110429), to no avail. Errata: I would like to stick with the official firmware, switching to something like DD-WRT or OpenWrt only as a last resort.

    Read the article

  • How to restore infrared support in Windows XP?

    - by Emil Rasmussen
    My infrared port is not working on my Windows XP SP 3 (Thinkpad X60). I can see it Device Manager, and it's status is, that it is working probably. The problem manifests in several ways. Originally I was trying to transfer data from my Polar RS800CX watch, and the Polar ProTrainer 5 software gave me the this error message: "Communication port couldn't be opened". Then I tried to connect the watch to another computer, and the infrared connection was established immediately. I then tried to connect the other computer to my Thinkpad X60. The other computer again immediately showed the Wireless Link icon "'computername' is in range" in the notification area. But nothing is shown on the Thinkpad, and a file transfer to the Thinkpad is unsuccessful with an error message that reports that "the target machine actively refused it [the connection]". This brings me to conclude that the infrared support in Windows on the Thinkpad is somehow broken. This is further supported by the fact that I can't find the "Wireless Link" icon in the Control Panel and when I try to run the irprops.cpl nothing happens. So the question is, how to reinstall the infrared support? Some of the solutions that I have explored is: I have tried to disable/enable the infrared in the BIOS - to trick a re-installation. The IR modules settings on the other computer that can get a successful IR connection is an exact match to the ThinkPad that can't get a connection. The was a problem in Windows XP SP 2 with the Wireless Link icon - MS KB article - but that hotfix can't be applied on SP 3 installation. I also guess that the hotfix is included in SP 3. Any other suggestions?

    Read the article

  • Inter-vlan routing issues

    - by DKNUCKLES
    I've been brought in to help administer a network and I've run into an issue - I'm not sure why this one is beyond me, however I figure an extra set of eyes on the problem may help resolve the issue. I have an HP MSM720 controller and at the time I'm trying to set up a basic hotspot set up with access points. For the time being I'm just looking to have people authenticate with a PSK and access the internet and other resources (namely printers) on other vlans. The user authenticates and the DHCP server on the controller gives them a 192.168.1.0/24 address. They are able to successfully browse the internet and ping machines on other networks, however they are unable to print to network printers that sit on the same LANs as the very computers that wireless clients can ping. The (extremely simplified) topology is as follows Computers on the wireless 192.168.1.1 network are able to ping computers on the 192.168.0.0 network, however cannot ping or print to the printers on the same network. I'm baffled and I have no idea why this is the case. Can anyone shed some light on this for me? Can someone spot the error of my configuration? EDIT : It should be noted that for whatever reason other computers on the 10.0.100.0/24 network cannot even ping the gateway of the Wireless Access network (192.168.1.1) - I'm not sure if this is relevant. These are the VLANS listed on the controller.

    Read the article

  • Make dhcp assign same IP and hostname for different interfaces at one machine

    - by Egeshi
    I have a feeling that question itself looks stupid but it is not. Please let me clarify. I have dynamic DNS with BIND and NIS configured at my LAN and have laptop which I am using in both wireless and wired mode. I mean that sometimes I have to use wired interface to achieve higher throughput but most of time I don't need it and using wireless mode. Everything works great. Issue is that I want both interfaces get same IP from DHCP. Just for convenient firewall setup. If I add both hosts to dhcp in this manner # bt wireless host bt { hardware ethernet 00:1f:1f:62:60:28; fixed-address 172.16.77.110; } # bt wired host bt { hardware ethernet 00:14:22:b7:5a:de; fixed-address 172.16.77.110; } DHCP says logs following message dhcpd: Dynamic and static leases present for 172.16.77.110 dhcpd: Remove host declaration bt-wired or remove 172.16.77.110 dhcpd: from the dynamic address pool for 172.16/16 Host records are added outside of any subnet, but it makes no difference if I put them there, effect is still the same. This is not critical but either is not my whim because even if DHCP seems to work fine for that "bt" host, I cannot make connection TO it from remote machine anymore with this definitely incorrect DHCP config. I'd be thankful if one spares a minute for advice about how to configure DHCPD correctly. UPDATE. I realize that there's a soulution to assign different hostname in DHCP config but would like to use benefits of short host names.

    Read the article

  • DHCP not responding from laptop or router, but works on directly plugged PC?

    - by Matt H
    I'm at my sister in law's place in Singapore. I'm not from Singapore but am here for a few months. She has some sort of cable modem made by motorolla (SB5101 Surfboard). I think it goes, through starhub or similar provider. Anyhow, her PC is directly attached by cable (not wireless) and she can access the internet. There is no wireless router connected to it. The PC is configured with DHCP and appears to be working. However, the moment I unplug her PC and plug in my laptop, it doesn't get an address. The interesting thing here is that I also see this toredo tunnel adaptor etc. I'm not familiar with what that is. It appears to be being assigned an IP v6 address and an IP v4 address. I thought perhaps it's my laptop, but also when I plug in my DDWRT based router, it also fails to get a DHCP assigned address on the WAN port. I can't also seem to connect into any web configuration on the motorolla modem either. Any ideas? what kind of setup is this? all I'd like to do is plug in my wireless router so I can roam around the house and also access the internet.

    Read the article

  • HP Procurve 2610 intervlan routing

    - by user19039
    Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all unmanaged switches attached to the core. We have a second 2610 on port 28 Running configuration: ; J9085A Configuration Editor; Created on release #R.11.25 hostname "Core_HP" interface 22 speed-duplex 100-full exit ip routing snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 1-12,17-22,26-27 ip address 192.168.4.6 255.255.255.0 tagged 25 no untagged 13-16,23-24,28 exit vlan 2 name "WAN" untagged 28 ip address 10.254.254.3 255.255.255.0 exit vlan 3 name "Wireless" untagged 13-16,24 ip address 192.168.7.6 255.255.255.0 ip helper-address 192.168.4.2 tagged 27 exit vlan 35 name "guest" untagged 23 tagged 24 exit vlan 4 name "esxi" untagged 25 ip address 10.10.1.1 255.255.248.0 exit ip route 192.168.5.0 255.255.255.0 10.254.254.1 ip route 192.168.6.0 255.255.255.0 10.254.254.1 ip route 0.0.0.0 0.0.0.0 192.168.4.10 show ip route IP Route Entries Destination Gateway VLAN Type Sub-Type M etric Dist. ------------------ --------------- ---- --------- ---------- - --------- ----- 0.0.0.0/0 192.168.4.10 1 static 1 1 10.10.0.0/21 esxi 4 connected 0 0 10.254.254.0/24 WAN 2 connected 0 0 127.0.0.0/8 reject static 0 250 127.0.0.1/32 lo0 connected 0 0 192.168.4.0/24 DEFAULT_VLAN 1 connected 0 0 192.168.5.0/24 10.254.254.1 2 static 1 1 192.168.6.0/24 10.254.254.1 2 static 1 1 192.168.7.0/24 Wireless 3 connected 0 0 show ip Internet (IP) Service IP Routing : Enabled Default TTL : 64 Arp Age : 20 VLAN | IP Config IP Address Subnet Mask Prox y ARP ------------ + ---------- --------------- --------------- ---- ----- DEFAULT_VLAN | Manual 192.168.4.6 255.255.255.0 No WAN | Manual 10.254.254.3 255.255.255.0 No Wireless | Manual 192.168.7.6 255.255.255.0 No esxi | Manual 10.10.1.1 255.255.248.0 No guest | Disabled

    Read the article

  • Windows 8 & Hyper-V Can't Bridge Wifi Connection

    - by xinunix
    So I have an odd issue that I can't quite figure out... I am running Windows 8 Enterprise on a Dell 6420 laptop. I have a Broadcom 802.11n wireless adapter. I am connected to an home router (Netgear WNDR3700) that is connected to the internet. It is a very simple home network setup. I am trying to stand-up a few VMs in Hyper-V and want the VMs to be able to access the internet over my wireless connection. I have found numerous examples of how to set this up using both External and Internal Virtual Switches but have yet to be able to get it to work on my machine. I have narrowed the issue down to the fact that my host machine always loses internet connection when I bridge my wifi connection (both when it is bridged automatically by windows when I setup an external virtual switch bound to the wifi adapter or if I do it manually by creating an internal virtual switch, right click on it and my wifi network and select "Bridge Connections".) In both cases after the bridge is established, my host machine can no longer connect to the internet. I am not sure where to start with troubleshooting this problem. After the bridge is setup, an ipconfig shows all netowrk devices on the machine as "Media Disconnected". I do know that the wireless adapter is connected to the router b/c it shows the connection as active and full-strength. The only thing I can possibly think of is that this machine also has the Cisco VPN client installed on it which installs a Cisco Virtual Network Adapter. Is it possible that this Cisco Virtual Adapter is causing me issues when I try to bridge? I saw some people had a similar issue with a VirtualBox virtual adapter when trying to share via Hyper-V. Any thoughts or suggestions on how to troubleshoot?

    Read the article

  • Weird connectivity issue wtih USB Wifi stick.

    - by Carlos Nunez
    Hi, all! I'm not sure if this is the appropriate place to throw this question out there, but I'll give it a shot. I'm setting up two PCs, and I've been having massive troubles getting a USB wireless dongle working. I have two Sony VAIOs (Windows XP, SP2) that I found second-hand, and since they will be in a location too far to connect by Ethernet (no, can't do patch panels here :p), I need to connect them by wireless. Easiest and cheapest way to do that at the moment is by using two USB wireless sticks that I've had for a while, but never used. One of the computers is using a SMC-manufactured card, whereas the other is using a Belkin F5D7050. The box with the SMC card can see and authenticate with my router just fine, and has no problem obtaining a DHCP lease. The box with the Belkin, on the other hand, isn't so lucky. While it can see my router and associate with it, it will not obtain a DHCP-issued address. Worse, when I assign a static IP address to the NIC, it can ping the entire network and access the internet (meaning it can authenticate with the router), but no computer can ping to it UNLESS that computer pinged the computer that's pinging it first. Confused? Well, so am I. Has anyone had this issue before? Is this just a sign of a bad card? (For the moment, I have it connected by Ethernet, as I haven't moved it yet. However, this will be a problem when I set it up in its new home later.) Thanks! -Carlos Nunez

    Read the article

  • VoIP setup for one external PSTN line

    - by Jcl
    I'm completely new to VoIP and the likes, and I'm trying to find information about what could be the best setup for this. I need 4 (maybe more in the future, but maximum 5 or 6) wireless extensions, connected to 1 PSTN line, and maybe 2 in the future. I've been trying to gather information about the gear needed but everything I find seems too much over-the-top (and extremely expensive). The main problem is that the physical place we are on doesn't have possibilities of having a decent internet connection, so using a external VoIP "virtual PBX" is not an option. Thing is, even if small, phone is critical to this organization. I currently have an analog DECT/GAP PBX which does what I need, however the PBX is very bad and the call quality is horrible, and that's why I want to change it. The requirements would be: 4 wireless terminals (routing cable is not an option), all of them ringing on incoming PSTN calls. Ability to do internal calls (4 separate offices) and ability to pass calls between terminals. The 4 terminals should be able to access the external PSTN line without dialing any special codes. Very important: terminals should be able to issue commands on the PSTN line to the external operator in the form *nn*nnnnnnnn# . Don't know wether this could face to be a problem, but I've had problems with analog PBX which would take any * as a PBX command and wouldn't allow terminals to send it to the external lines. Not so important, but would be nice to have: call waiting music Could anyone recommend such a setup? I need to be able to do this on a EXTREMELY LIMITED budget (that is: I don't have a limit, but all should get as much to zero as possible). I have enough spare powerful computers and a 300mbps wireless network which works just fine, so that's not to include in the budget. Don't really know if this is the best place to ask, but it's the most StackExchange-related site I've found to this subject.

    Read the article

  • Why is my Network Connections list empty?

    - by DealerNextDoor
    I'm sure this question has been asked before, but none of the links I have found have worked. I've been trying to find fixes for the past couple of weeks. This all started a few days after I got my router. At first, I thought it was just something that would fix it self. But as usual, it never does. I am trying to update my router's wireless card to try and fix this problem, but I need to get the card's information to update it on the HP website. And since my Network Connections list is empty, I can't get any information about it. So to get around this, I tried to go to 'Manage Wireless Networks', and when I tried to get the properties from there, I get this error: Windows has encounter an error saving the wireless profile. Specific Error: The data is invalid. So, what all can I do to try and fix this? Any help will be appreciated. EDIT: Sorry, forgot to put router info. Router Model: WNR1000v2-V2 Router Maker: NETGEAR Router Firmware Version: V1.0.0.12NA The router is up-to-date on all updates.

    Read the article

< Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >