Search Results

Search found 14951 results on 599 pages for 'connect by'.

Page 494/599 | < Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >

  • Restrict SSH user to connection from one machine

    - by Jonathan
    During set-up of a home server (running Kubuntu 10.04), I created an admin user for performing administrative tasks that may require an unmounted home. This user has a home directory on the root partition of the box. The machine has an internet-facing SSH server, and I have restricted the set of users that can connect via SSH, but I would like to restrict it further by making admin only accessible from my laptop (or perhaps only from the local 192.168.1.0/24 range). I currently have only an AllowGroups ssh-users with myself and admin as members of the ssh-users group. What I want is something that works like you may expect this setup to work (but it doesn't): $ groups jonathan ... ssh-users $ groups admin ... ssh-restricted-users $ cat /etc/ssh/sshd_config ... AllowGroups ssh-users [email protected].* ... Is there a way to do this? I have also tried this, but it did not work (admin could still log in remotely): AllowUsers [email protected].* * AllowGroups ssh-users with admin a member of ssh-users. I would also be fine with only allowing admin to log in with a key, and disallowing password logins, but I could find no general setting for sshd; there is a setting that requires root logins to use a key, but not for general users.

    Read the article

  • heavy load on mysql

    - by payal
    i have dedicated server with very good configuation like 16 gb ram etc but i am facing heavy load from mysql i am running a music wesbite however only one database is running and 5-10 pages are only running.when i click on whm show processlist it shows only 2-3 processes However whm load is always less than one but when i click on whm load it shows 20% of cpu usage by mysql and after some time it starts saying can not connect to mysql . mysql server has gone away 1691 (Trace) (Kill) mysql 0 19.2 2.7 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --log- error=/var/lib/mysql/server.xyz.com.err --pid-file=/var/lib/mysql/server.xyz.com.pid i have tested static pages they are coming blezing fast but all dynamic pages which are using mysql is coming damn slow it takes years to open.. my.conf file is [mysqld] key_buffer = 1536M max_allowed_packet = 1M max_connections = 250 max_user_connections = 15 wait_timeout=40 connect_timeout=10 table_cache = 512 sort_buffer_size = 2M read_buffer_size = 2M read_rnd_buffer_size = 8M myisam_sort_buffer_size = 64M thread_cache_size = 8 query_cache_size = 32M server-id = 14 old-passwords = 1 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash [myisamchk] key_buffer = 256M sort_buffer_size = 256M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout ihave checked log error file it says nothing.i have increased maximum connnection also to 1000 but still same problem is there .if i disconnect that one databasejust by changing the name of database i can see withing half hour the load of server and mysql goes down to negliglble .i have tested everything and if there are some query which can cause heavy load to server can you please list which type of query can cause heavy load on server then also for 5-10 pages it will never cause that much heavy load. i have seen server with 500 websites but was working just fine.

    Read the article

  • heavy load on mysql

    - by payal
    i have dedicated server with very good configuation like 16 gb ram etc but i am facing heavy load from mysql however only one database is running and 5-10 pages are only running. However whm load is always less than one but when i click on whm load it shows 20% of cpu usage by mysql and after some time it starts saying can not connect to mysql . mysql server has gone away 1691 (Trace) (Kill) mysql 0 19.2 2.7 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --log- error=/var/lib/mysql/server.xyz.com.err --pid-file=/var/lib/mysql/server.xyz.com.pid i have tested static pages they are coming blezing fast but all dynamic pages which are using mysql is coming damn slow it takes years to open.. ihave checked log error file it says nothing.i have increased maximum connnection also to 1000 but still same problem is there .if i disconnect that one databasejust by changing the name of database i can see withing half hour the load of server and mysql goes down to negliglble .i have tested everything and if there are some query which can cause heavy load to server can you please list which type of query can cause heavy load on server then also for 5-10 pages it will never cause that much heavy load. i have seen server with 500 websites but was working just fine.

    Read the article

  • Password Authentication Fails - NTLMv2

    - by JMeterX
    Environment: Windows 2000 sp4 EDIT: Domain Controller with no trust setup with the Win2008 Server Windows XP machines Windows 2008 Server Netapp NAS Problem: We have a shared folder that resides on a NAS using a Windows 2008 AD for the authentication with the proper permissions setup. When the Windows 2000 machine tries to open the share residing on the Win2008 machine, it is prompted for a username and password. Upon entering the credentials it continuously re-asks for credentials. Important Details: The Windows 2000 machine can ping both the XP machines and the Windows 2008 Server The Windows 2008 machine is mandated to only use NTLMv2 The Windows 2000 machine was originally set to NTLM but was recently switched to NTLMv2 if negotiated for the purpose of trying to connect to the share. As I am sure it will come up, we are using Windows 2000 because of contractual obligations Questions: Why is password Authentication failing in this case? After setting a GPO for the Win2000 machine for it to use NTLMv2, do we need to reboot the machine for the changes to take affect? We used SECEDIT to update the GPOs without rebooting. UPDATE We checked both of the 2008 Domain Controllers to find an error code. We received: Microsoft_Auth_Package_V1_0 0xc000006a Event ID: 4776 I know this to be an authentication error via THIS article "The value provided as the current password is not correct" We know this password to be correct, but since these two domains (Win2000 & Win2008) do not have a trust setup what authentication account needs to be used? One that resides on the Win2000 hosted domain?

    Read the article

  • Strange Internet Connection issues

    - by Nodren
    I'm attempting to troubleshoot problems with a laptop computer(HP 8510w) while it's connected to a server of mine via Remote Desktop. I double checked all the settings on the win2k3 server for remote desktop to verify that remote desktop isn't what's causing the disconnect issues, and other people using different computers/laptops can all connect to remote desktop correctly with no issues. These problems happen specifically when the laptop is connected via wifi(several different wifi sources, so it's not an ISP issue) as well as connected via a Verizon data card. However there's no network downtime when the laptop is resting in the docking station and plugged into the network with the remote desktop server. These problems have also only recently occurred since a recent hard drive failure in which a new hard drive was purchased and the laptop had a fresh install of windows xp professional. There's no special software used on this machine, just office 2003. So my question is, what could cause two types of internet access to fail while other types do not? If it is infact related to the win2k3 server, why is this particular laptop getting disconnected when others are not and are all on at the same time?

    Read the article

  • Why my Ldirectord check multiple times on read server every interval?

    - by garconcn
    I have a Ldirectord server and two real servers. My ldirectord used to check the request page on real server once in every interval, but now I found that it check four times. I have monitored the log on both real servers, they have the same problem. Here is my ldirectord configuration: checktimeout=10 checkinterval=5 autoreload=yes logfile="/var/log/ldirectord.log" quiescent=no virtual=192.168.1.100:80 fallback=127.0.0.1:80 real=192.168.1.10:80 gate real=192.168.1.20:80 gate service=http request="lb.html" receive="still alive" scheduler=sh persistent=60 protocol=tcp checktype=negotiate Ldirectord will connect to each real server once every 5 seconds (checkinterval) and request 192.168.0.10:80/test.html (real/request). The access log in real server: 192.168.1.100 - - [13/Jun/2012:10:36:44 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:44 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:44 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:44 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:49 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:49 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:49 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:49 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:54 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:54 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:54 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:54 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805"

    Read the article

  • Connecting a laptop to a TV via HDMI

    - by Madmartigan
    I just bought a new Dell XPS17 laptop (Win7) that only has HDMI output. My last 2 laptops had VGA, which I used to connect to my Sony Bravia 32" TV with no issues, but with the HDMI it's been quite a headache. Drivers for display adapters have been updated to the latest versions: Intel(R) HD Graphics Family NVIDIA GeForce GT 550M I went to a store and plugged in to 4 different TVs from different manufacturers. A sales rep and I spent about 30 minutes being baffled by the results (which are the same as my current TV): Extreme buggy behavior in the Nvidia and Windows display/resolution control panel Can not extend or duplicate displays, can only select one Third and fourth output devices "randomly" detected by the Windows control panel Could not get the screen to fit the output (edges cut off on all sides by about a half inch) Resolution and colors less than perfect. Artifacts around text. Display "randomly" cuts out Defaults to TV output only when plugged in Can not change resolution on either device when connected No audio from the TV Plugged in to 3 monitors from different manufacturers: Defaults to duplicated displays when plugged in Everything works perfectly So far, four people have gone through all the settings in the latop with no luck. I had similar, but not exactly matching results with a different laptop. I'm using the Sony Bravia currently at home, but in order to get it to work I have to turn on the laptop, wait until the display shows up on it, close the lid, then cycle through each output channel on the TV until I come back around to the HDMI port again, but still I have the symptoms described above. However: Once in a while, it just works. Sometimes, seemingly randomly, the output fits the screen perfectly. Sometimes the audio comes through the speakers too, but not always. Usually my screen saver "Mystify" will come up with a message that it cannot be displayed due to a limitation of the video card, but then sometimes it works fine. These 3 things seem to be independent of each other and don't always happen together. So, is there any way to get the laptop to output correctly to a TV, or is it just not meant to be?

    Read the article

  • How to use a home network patch panel?

    - by Torben Gundtofte-Bruun
    I'm planning a home network in a house that's not built yet. One recommendation is to add network sockets in various rooms and have them all end in a central place, where it all connects using a network switch. So far so good. Another recommendation says to not connect everything directly to the switch, but to a patch panel which in turn is connected to the switch. I'm unsure why this is good. Is there any practical advantage of using a patch panel if you're not planning to re-wire things very often? How does a patch panel actually work? Let's say it has 24 ports. Does it have another 24 ports on the backside that go to the switch, or what? Wikipedia isn't helpful on this. Clarification: I am planning to run network cables through conduits inside the walls and terminated with network sockets in the wall (as opposed to having just conduits and long regular network cables that have a normal plug in each end). Going by RedGrittyBrick's answer, a patch panel is nearly unavoidable in that case.

    Read the article

  • Docking Station Sound Doesn't Work on Dell D830 with Windows 7

    - by cisellis
    I have a Dell Latitude D830 laptop that is running Windows 7 Enterprise x64. I connect to a docking station during the day with multiple monitors, a keyboard and a mouse. Everything runs with no problems including most of the docking station ports (usb, monitors, etc.) However, the sound port from the docking station does not work since the upgrade to Windows-7. Even with the laptop plugged in, the sound always comes out of the laptop, not the headphones plugged into the docking station. Here's what I've tried: I've seen other issues like via Google this that seem to be mostly unanswered. I found one or two that referenced using the Vista x64 drivers, especially the Nvidia drivers. I do not have an Nvidia chipset but I've reinstalled the sound drivers and that has not helped. I don't have a support contract and considering the cost is usually high to call Dell, that's not an option. Dell's forums are pretty much a wasteland and I've found no help there. Since this is a docking station I thought I might need to try the SATA or Intel chipset drivers from the dell site instead, however I'm not really sure and I need to work on this laptop in the meantime. I can't really afford the downtime to experiment with random drivers all day in case they turn out to be incompatible (Dell still hasn't added Windows 7 to their support site as far as I can tell). Does anyone have any other ideas? Has anyone had this issue and solved it? If so, how? Thanks in advance for your help.

    Read the article

  • Number of routers in small community lock up and require reboot.

    - by Anthony Hiscox
    I live in a small town which has one primary ISP. Lately I have noticed that a number of wireless routers have been locking up and requiring a reboot before allowing any connections. This has affected two of my routers, my work router, and a few others. In all cases wired continued to function as usual. Often wireless clients can see the SSID but simply won't connect. I can only think of a few possibilities and was hoping someone here might be able to point me in the right direction: Our ISP is well known to be flaky, something they are doing is causing this, what that might be I have no clue it as seems to affect the wireless only. There's a power issue in town, given our remote location and reputation for crap electrical, this seems reasonable. Only one router was plugged in to a UPS, and I'm not sure of the quality. There is some bug in all the different firmware for every one of these routers (all different). That doesn't seem reasonable, unless; it's an unknown (or known) exploit or DoS of some sort being launched by a massive team of ninjas hell bent on forcing us all to be tethered to our walls by ethernet cables or; it's just been a coincidence and I'm just paranoid (this has some weight, I mean read 4 again). Anyone else experience similar issues and have some tips?

    Read the article

  • Remote connection to a Windows 2008 Server Web edition

    - by Lorenzo
    Hello I have just installed Windows 2008 web server to have a development/test site on my office. In the test network I only have 2 machines: Windows server 2008 Web Edition Vista x64 client machine with Visual Studio The client and the server are networked using a NETGEAR router. I have enabled Remote desktop on the server and when I try to connect to it within the Vista client I get the credential window as in the following screenshot. But even if I write the correct credentials I am not able to remote login on the server. Where am I doing wrong? Update 1 I have even tried to create a folder share on the server. But I am not able to access it for the same reason. User or password invalid it says. But this is impossible as I am logging in the server with the same credentials. Update 2 If I try to browse the network from the RDP client I receive a message saying that there are no server running Terminal Services in my network.... :O

    Read the article

  • How to have a shell script available everywhere I SSH to

    - by aib
    I have a shell script which I simply cannot do without: bar from Theiling Online I use SSH a lot and on a variety of *nix servers. However, I am not a system administrator and usually don't have the time or privileges to install it on every server I connect to. It is apparently a very portable sh script and has command line options to export itself as a shell function, which got me thinking: Could I use one of OpenSSH's subjectively obscure features to export it everywhere I go? My first thought was to assign the source to an environment variable like BAR = "cat -v" and then execute it on the other side as `$BAR`, but 1) I can't even get the cat example to to work locally, 2) I don't know how to put the script's actual multiline source into an environment variable and 3) I have yet to see a machine with PermitUserEnvironment enabled. I guess I could even do with an ssh option to write a file called ~/bar at logon, but a more volatile solution would be better. Calling wget http://.../bar at logon would be unacceptable. Any ideas? P.S. Putty-specific solutions, though I doubt any would exist, are also fine.

    Read the article

  • EC2 instances keep becoming inaccessible via SSH, can I use elastic loadbalancer to check SSH connectivity?

    - by Rick
    This is mainly an issue for my development ec2 server as it seems that my instance keeps becoming inaccessible via SSH. It happened yesterday so I killed that one and started a new one and happened again later today. The server still works, my web application is accessible in a web browser but whenever I try to connect via SSH I get a pemrission denied (public key) error message in my terminal. I am 100% sure I am doing nothing wrong as I can create a new instance of the exact same AMI (its a personal custom AMI), change absolutely nothing, including using the same .pem key, and then am able to SSH into that new instance using the exact same command as before (just changing the IP address). I understand that ec2 can have issues but having this happen every day seems a bit odd.. I am using an m2.xlarge instance so I don't know if these tend to be unstable, in the past I have used a small instance and had it running for months with no problems which is why I find this so odd. I am looking into using loadbalancing but it seems the only "health" checks they offer is for http or tcp so I'm not sure if I can make it monitor for SSH connectivity. This is important for development as I may make 1-2 new pushes of an application a day and use SSH to do this. I have a designer that needs to have the app always accessible as he works with the front-end files to test output with the live application. Anyways, any advice / info is appreciated

    Read the article

  • VLAN for WiFi traffic separation (new to VLANing)

    - by Philip
    I run a school network with switches in different departments. All is routed through to a central switch to access the servers. I would like to install WiFi access points in the different departments and have this routed through the firewall (an Untangle box that can captive-portal the traffic, to provide authentication) before it gets onto the LAN or to the Internet. I know that the ports that the APs connect to on the relevant switches need to be set to a different VLAN. My question is how do I configure these ports. Which are tagged? Which are untagged? I obviously don't want to interrupt normal network traffic. Am I correct in saying: The majority of the ports should be UNTAGGED VLAN 1? Those that have WiFi APs attached should be UNTAGGED VLAN 2 (only) The uplinks to the central switch should be TAGGED VLAN 1 and TAGGED VLAN 2 The central switch's incoming ports from the outlying switches should also be TAGGED VLAN 1 and TAGGED VLAN 2 There will be two links to the firewall (each on its own NIC), one UNTAGGED VLAN 1 (for normal internet access traffic) and one UNTAGGED VLAN 2 (for captive portal authentication). This does mean that all wireless traffic will be routed over a single NIC which will also up the workload for the firewall. At this stage, I'm not concerned about that load.

    Read the article

  • Turning on Bluetooth disables wifi on Yoga 2

    - by Yostage
    I have a Lenovo Yoga 2. The moment that I turn on bluetooth, the wifi drops out - I lose connection, and connecting again shows "connection failed". If I turn the bluetooth off, wifi can reestablish fine. I've tried lots of different combinations of drivers for both the wifi and the bluetooth, but no combination has has changed this behavior yet. I've read some speculation that the cards have insufficient shielding, but that seems like kind of a large flaw to ship with. I've tried with a Carbon X1, a Yoga 2 Pro, and a Yoga 2 all next to each other on the desk while running InSSIDer. The X1 and the Y2P don't lose wifi connection when the bluetooth turns on, but the Y2 does immediately. The Y2P and the Y2 are running the same drivers for bluetooth and wifi, and appear to have the same wireless card internally. During the failure state, InSSIDer still sees signal strength for my network, but I cannot connect to it. stats: the card that comes in the laptop is an Intel Wireless-N 7260 Intel Bluetooth driver is at 17.0.1401.422 Intel Wireless driver is at 17.0.2.5 Windows 8.1 x64 Home wifi is a Medialink MWN-WAPR150N

    Read the article

  • SSL connection error for only one site (of many) on server

    - by Matt Lacey
    I have a server running many websites, each with SSL. One of the sites is now refusing connections over SSL. This was previously working and I'm looking for assistance in determining what has been changed. Here's the situation: http://site1.com/ - works https://site1.com/ - works http://site2.com/ - works https://site2.com/ - Doesn't work (but did previously) Both sites are on the same server (Win Server 2003 SP2 - IIS6) Both sites use certificates from the same authority and are both valid (according to IIS). As far as I can tell, both sites have certificates configured identically in IIS. (Checked by a manual/visual check of properties, side by side) Through use of OpenSSL I can see that there's a "ssl handshake failure" when trying to connect to site2 using https. What could be the cause of this? How can I investigate further? Without SSL connections being available to this site, users are unable to log in or register. :( disclaimer: I'm not a server admin and not responsible for the box. Yes, there are wider issues here but I need to get this working again first.

    Read the article

  • Router not connecting to the internet

    - by Peter
    I had a weird problem this morning with my router - it's an Alice Gate VoIP 2 Plus WI-FI - not connecting to the internet after more or less 1 hour online (I'm always connected with the ethernet cable). The led status lights for Power, WI-FI, ADSL, Internet, Service should be on in order to be connected and navigate online. The problem was that the leds ADSL, Internet were off and I did not know why because it never happened before. I looked at the stats in the settings and the numbers for Bytes/Packages for both Sent/Received were there and increasing but I couldn't connect to the internet. I called tech support, they checked and told me to keep the router on for 48 hours because they were checking it. I've reset it twice before and after I called tech support and it still did not work so after about 2 hours of waiting I tried connecting using WI-FI and the leds 'magically' turned on, first the ADSL and Internet(Internet led always turns on last). At this point I'm curious what could of caused this and I'm doubting that the tech-support guys did something. What could of been the problem with the ethernet cable not connecting in the first place? It always works. What do the tech support guys normally do when they tell me to keep the router on so they can 'check it'? PS: I'm using ubuntu 32 bit

    Read the article

  • Attaching 3.5" desktop drive to MacBook SATA

    - by Kyle Cronin
    I have a mid-2007 MacBook that, according to the Apple Store, has suffered some liquid damage and requires a new logic board to operate correctly, a ~$750 repair I've been told (would normally be around ~$300 were it not for the "liquid damage"). The unit itself works fine - the only problem I've been having is that the system does not recognize the battery and will not charge it. Curiously, the system can still be powered by the battery and even recognizes when the power cord is detached by diming the backlight, but I digress. Now that this laptop will likely become a desktop, I'm wondering if it might be possible to attach a desktop drive. I recently purchased a 2TB SATA drive and I'm wondering if it's possible to somehow attach it where the current internal drive connects. Obviously the drive itself will not fit inside the device, but as the unit will spend the rest of its days on my desk, that's not really much of an issue. My main questions are: Is this possible? If so, how would I connect the drive? Would a SATA extender cable work? Is the SATA port on my MacBook capable of powering a desktop drive? Or should I just get a SATA male-to-female cable and see if I can power the drive through other means (a cheap power supply, for example) The disk I'm referring to is the Hitachi Deskstar HD32000. Though I couldn't find that exact model on Hitachi's support site, these are the power requirements for a similar drive, the 7K2000 (2TB, 7200RPM, SATA II): Power Requirement +5 VDC (+/-5%) +12 VDC (+/-10%) Startup current (A, max.) 1.2 (+5V), 2.0 (+12V) Idle (W) 7.5 From what I've read, 2.5" drives require 5V, meaning that my MacBook obviously is capable of producing it. The specs seem to suggest that this drive seems capable of accepting it instead of the typical 12V - is this an accurate interpretation of the power requirements? Or does it need both 12V and 5V?

    Read the article

  • Samba Does Not List Files In Shared Directory

    - by Sean M
    I am running Samba on a CentOS server, and I am experiencing a problem where it allows me to connect to the server and see a share, but shows the share as an empty directory. I find this behavior strange. Here is the stanza in my smb.conf for the given share: [seanm] path = /home/seanm writeable = yes valid users = seanm, root read only = No Here's what I see on the server side: [seanm@server ~]$ ls -l -rw-r--r-- 1 seanm seanm 40 Jan 4 13:45 pangram.txt And yet: [seanm@client ~]$ smbclient //server/seanm -U seanm -W WORKGROUP Enter seanm's password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1] smb: \> ls . D 0 Fri Jan 7 10:08:55 2011 .. D 0 Fri Jan 7 07:58:31 2011 58994 blocks of size 262144. 50356 blocks available This behavior is present on both a Windows client and a Linux client system. The behavior is present with the firewall on and with the firewall off, so it's not that. Neither /var/log/messages nor /var/log/secure have any complaints about Samba. I doubt that SELinux is a problem: just in case, here are the relevant settings. [root@server ~]# getsebool -a | grep samba samba_domain_controller --> off samba_enable_home_dirs --> on samba_export_all_ro --> off samba_export_all_rw --> off samba_share_fusefs --> off samba_share_nfs --> off use_samba_home_dirs --> on virt_use_samba --> off What am I doing wrong here, and what can I do to fix it?

    Read the article

  • What should be monitored to troubleshoot file sharing problems?

    - by RyanW
    I'm running into some problems with a file share used by an ASP.NET web application. With this configuration, there are 2 web servers (win2k8 web) that connect to a file server (win2k8 enterprise), reading and writing files using a file share. Recently, one of the web servers has begun encountering an error accessing the file share: IOException: The specified network name is no longer available. There does not appear to be much info on the web for explaining what's causing this and how to best fix it, so I'm looking at what I can monitor in order to get clues. I'm not sure if it's hardware, just a load issue, file size, frequency, etc. With Windows perfmon, what can I monitor on the File Server side? There's the "Files Open" object, any other good ones? What can I monitor on the web server side? EDIT: I'll add that the UNC path uses the IP address of the file server, not a name to resolve. Also the share is a single, flat directory with over 100K files.

    Read the article

  • python mysqldb - mysql server gone away - can't reconnect

    - by david.barkhuizen
    When attempting to import a bunch of data into mysql tables using python and mysqldb, I run into the following error '2006 - mySQL Server has gone away', and then I am unable to reconnect again within the script. I am iniitially re-using a connection object across transactions ( delineated by conn.commit() ), then when I first encounter this exception, if I create a new connection by calling MySQLdb.connect(), this new connection also fails with the same exception. This error does not occur immediately, I can pump a fair amount of data into the db, but then faithfully occurs after I have inserted a couple thousand records, so roughly once the db has committed a certain transaction volume, it always falls over like this. If I rerun the script, WITHOUT restarting the db server. then it resumes where it left off, pumps in some data, then falls over again. Before recommendations to change time-out timings, does anyone know why I am not able to establish a new connection after the initial failure ? - Even if I try a couple of times waiting a couple of seconds between each. (btw, I'm running Windows 7, mysql server 5.1.48, mysqldb 1.2.3.gamma.1, python 2.6)

    Read the article

  • Windows Server 08 R2 file share File locking, OSX clients

    - by Keith Loughnane
    I've spent the last two weeks banging my head against this wall. I think I'm starting to understand the problem though. I manage a design company and they have 5 macs (OSX 10.5/.6/.7) connected over SMB to a Windows 2008 R2 file server, another machine functions as Domain Controller (that might not matter). All the macs can connect ok, no issues finding the server or logging in. For the most part things are ok. The problem is files locking up. I thought it was a permissions issue at first but it seems to be file locking. The users open a file; .ind, .pdf etc the file opens, the software reads it and closes it. That's fine, but the folder above the folder locks, it can't be moved and it can't be renamed. Eg: /Working/Project01/Imagefiles/image.pdf /Finished/ The user opens image.pdf, closes it and wants to move the whole Project01 folder into Finished. It gives a username/pass dialogue and then does nothing, no error, or just does nothing. Trying to rename gives a dialogue that says you don't have permission. It looks like it's looking for permission locally, which is why I spent about a week looking at that. Eventually I found that Finder on the macs seems to be keeping the folders open. I can work around it by Killing finder, remounting the shared drive or closing the file through the server manager but this just proves the theory it's not a solution. Has anyone dealt with this problem?

    Read the article

  • Windows VPN for remote site connection drawbacks

    - by Damo
    I'm looking for some thoughts on a particular way of setting up a estate of machines. We have a requirement to install machines into unmanned, remote locations. These machines will auto login and perform tasks controlled from a central server. In order to manage patching, AV, updates etc I want these machines to be joined to a dedicated domain for this estate. Some of the locations will only have 3G connectivity (via other hardware), others will be located on customer premises in internal networks. The central server (of ours) and the Domain Controller will be on a public WAN. I see two ways of facilitating this. Install a router at each location and have a site to site VPN between the remove device and the data centre where the servers are location Have the remote machine dial up and authenticate via a Windows VPN connection to the DC via RAS Option one is more costly to setup and has a higher operational cost. It also offers better diagnostics if the remote PC goes down. Option two works well but is solely dependent on the VPN connection been made before any communication can be made to the remote machine. In a simple test, I can got a Windows 7 machine to dial a VPN prior to authentication to a domain, then automatically login to the machine using domain credentials. If the VPN connection drops, it redials. I can also create a timed task to auto connect every hour in case of other issues. I'd like to know, why (if at all) is operating a remote network of devices which are located in various out of band locations in this way a bad idea? Consider 300-400 remote machines all at different sites. I'd rather have 400 VPN connections to a 2008 server than 400 routers, however I'd like to know other opinions on this.

    Read the article

  • Setting up xpra for client use in OS X

    - by Jonathan
    I've been trying to get xpra to run on OS X for the last few days to connect to my Ubuntu server. Note that there's a GUI for it called shifter, but that (at least on OS X) is still far too buggy. For those who don't know what xpra is, if you know what screen is, it's like screen for GUI X Windows apps tunneled over ssh. You can render a remote X app locally so it's faster than sending a series of compresses screen shots (like VNC), but with xpra you can disconnect and reconnect on different computers. To get the basic functionality you can just type "ssh -X server.location" and any GUI app you open from the command line will open locally. I've been able to get xpra to build by doing the following: Download pari-all-0.0.6.tar.gz from the xpra site listed under upstream and untar it. Issue the following Mac Ports command (Dependencies thanks to RogBlog): sudo port install python25 python26 py26-pyrex py26-gtk xorg-libXtst py25-gobject py25-gtk py25-nose py26-nose xorg-libXdamage xorg-libXcomposite xorg-libXtst xorg-libXfixes In the upstream list of v0.0.06 patches (NOT 0.0.8pre!) on the xpra site listed above, download mswindows-conditional-pyrex.patch. Open the patch with your favorite text editor and change the single occurrence of "win" in it to "darwin". Apply the patch to setup.py. Run do-build in the command line. Now where I'm stumped: how do I run xpra? The build produces a sub directory called install/bin in which xpra is located, but when I try to run it I get the following error: Traceback (most recent call last): File "./xpra", line 4, in import xpra.scripts.main ImportError: No module named xpra.scripts.main There is a file called main.py under xpra/scripts, but I don't know any python and I'm not sure if this is what it's looking for, and what to do with it even if it is. My goal is to set up xpra so I can install it into /usr/bin (or some other common path for executables) and execute it whenever I please. What do I do next?

    Read the article

  • What could cause an 101 Error in WAMP under Windows 7 ?

    - by Brayn
    Hey, I'be been using WAMP for local development for quite a while now but lately I've been getting an Error 101 message when I browse localhost sites. It's possible for this to have appeared after the last WAMP update but I'm not 100% sure on this. If I try again and again, after several page refreshes it works but it's really annoying! The exact error message is: Error 101 (net::ERR_CONNECTION_RESET): Unknown error. This is my configuration: OS: Windows 7 Apache: 2.2.11 PHP: 5.2.9-2 WAMP: 2.0 Also the local scripts connect to a remote MySQL server, they don't use the local MySQL(I don't know if it matters, just though I let you know). I've been looking into the apache logs and I've found the following. It seems that the apache server keeps restarting and I can't figure why: [Wed Oct 14 13:52:30 2009] [notice] Parent: child process exited with status 255 -- Restarting. [Wed Oct 14 13:52:30 2009] [notice] Apache/2.2.11 (Win32) PHP/5.2.9-2 configured -- resuming normal operations [Wed Oct 14 13:52:30 2009] [notice] Server built: Dec 10 2008 00:10:06 [Wed Oct 14 13:52:30 2009] [notice] Parent: Created child process 6784 [Wed Oct 14 13:52:31 2009] [notice] Child 6784: Child process is running [Wed Oct 14 13:52:31 2009] [notice] Child 6784: Acquired the start mutex. [Wed Oct 14 13:52:31 2009] [notice] Child 6784: Starting 64 worker threads. [Wed Oct 14 13:52:31 2009] [notice] Child 6784: Starting thread to listen on port 80. [Wed Oct 14 13:52:32 2009] [notice] Parent: child process exited with status 255 -- Restarting. [Wed Oct 14 13:52:33 2009] [notice] Apache/2.2.11 (Win32) PHP/5.2.9-2 configured -- resuming normal operations [Wed Oct 14 13:52:33 2009] [notice] Server built: Dec 10 2008 00:10:06 [Wed Oct 14 13:52:33 2009] [notice] Parent: Created child process 3572 [Wed Oct 14 13:52:33 2009] [notice] Child 3572: Child process is running [Wed Oct 14 13:52:33 2009] [notice] Child 3572: Acquired the start mutex. [Wed Oct 14 13:52:33 2009] [notice] Child 3572: Starting 64 worker threads. [Wed Oct 14 13:52:33 2009] [notice] Child 3572: Starting thread to listen on port 80. Also I've checked Windows Firewall and disabled any other protection that I have on this computer with no improvement. Thanks!

    Read the article

< Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >