cursor current - Page 494

Functions connected to signals in QtScript (on Qt 4.5.2) are not firing

- by Cody Brocious

I've injected into a proprietary Qt (4.5.2) application, added my own compatible build of QtScript, and have managed to get access to all the signals I need. However, when connecting to them (via QtScript) my functions are never called. I've come up with a few theories for why this is and I've tested everything I can think of, but I've hit a bit of a wall. Note, I've never had any connection exceptions whatsoever. Here are my current theories: The signals I'm connecting to are already connected to other slots, and that's somehow blocking it (but as far as I know, all Qt signals fire to all slots with no extra work, and can't be restricted in this way) The signals are rejecting my connection, or disconnecting me after connection (but I see no facility for this) My connection is happening from another thread, and this is somehow causing it not to connect properly Are any of these theories plausible? If not, what have I missed?

Read the article

Setting up and using Bing Translate API Service for Machine Translation

- by Rick Strahl

Last week I spent quite a bit of time trying to set up the Bing Translate API service. I can honestly say this was one of the most screwed up developer experiences I've had in a long while - specifically related to the byzantine sign up process that Microsoft has in place. Not only is it nearly impossible to find decent documentation on the required signup process, some of the links in the docs are just plain wrong, and some of the account pages you need to access the actual account information once signed up are not linked anywhere from the administration UI. To make things even harder is the fact that the APIs changed a while back, with a completely new authentication scheme that's described and not directly linked documentation topic also made for a very frustrating search experience. It's a bummer that this is the case too, because the actual API itself is easy to use and works very well - fast and reasonably accurate (as accurate as you can expect machine translation to be). But the sign up process is a pain in the ass doubtlessly leaving many people giving up in frustration. In this post I'll try to hit all the points needed to set up to use the Bing Translate API in one place since such a document seems to be missing from Microsoft. Hopefully the API folks at Microsoft will get their shit together and actually provide this sort of info on their site… Signing Up The first step required is to create a Windows Azure MarketPlace account. Go to: https://datamarket.azure.com/ Sign in with your Windows Live Id If you don't have an account you will be taken to a registration page which you have to fill out. Follow the links and complete the registration. Once you're signed in you can start adding services. Click on the Data Link on the main page Select Microsoft Translator from the list This adds the Microsoft Bing Translator to your services. Pricing The page shows the pricing matrix and the free service which provides 2 megabytes for translations a month for free. Prices go up steeply from there. Pricing is determined by actual bytes of the result translations used. Max translations are 1000 characters so at minimum this means you get around 2000 translations a month for free. However most translations are probable much less so you can expect larger number of translations to go through. For testing or low volume translations this should be just fine. Once signed up there are no further instructions and you're left in limbo on the MS site. Register your Application Once you've created the Data association with Translator the next step is registering your application. To do this you need to access your developer account. Go to https://datamarket.azure.com/developer/applications/register Provide a ClientId, which is effectively the unique string identifier for your application (not your customer id!) Provide your name The client secret was auto-created and this becomes your 'password' For the redirect url provide any https url: https://microsoft.com works Give this application a description of your choice so you can identify it in the list of apps Now, once you've registered your application, keep track of the ClientId and ClientSecret - those are the two keys you need to authenticate before you can call the Translate API. Oddly the applications page is hidden from the Azure Portal UI. I couldn't find a direct link from anywhere on the site back to this page where I can examine my developer application keys. To find them you can go to: https://datamarket.azure.com/developer/applications You can come back here to look at your registered applications and pick up the ClientID and ClientSecret. Fun eh? But we're now ready to actually call the API and do some translating. Using the Bing Translate API The good news is that after this signup hell, using the API is pretty straightforward. To use the translation API you'll need to actually use two services: You need to call an authentication API service first, before you can call the actual translator API. These two APIs live on different domains, and the authentication API returns JSON data while the translator service returns XML. So much for consistency. Authentication The first step is authentication. The service uses oAuth authentication with a bearer token that has to be passed to the translator API. The authentication call retrieves the oAuth token that you can then use with the translate API call. The bearer token has a short 10 minute life time, so while you can cache it for successive calls, the token can't be cached for long periods. This means for Web backend requests you typically will have to authenticate each time unless you build a more elaborate caching scheme that takes the timeout into account (perhaps using the ASP.NET Cache object). For low volume operations you can probably get away with simply calling the auth API for every translation you do. To call the Authentication API use code like this:/// /// Retrieves an oAuth authentication token to be used on the translate /// API request. The result string needs to be passed as a bearer token /// to the translate API. /// /// You can find client ID and Secret (or register a new one) at: /// https://datamarket.azure.com/developer/applications/ /// /// The client ID of your application /// The client secret or password /// public string GetBingAuthToken(string clientId = null, string clientSecret = null) { string authBaseUrl = https://datamarket.accesscontrol.windows.net/v2/OAuth2-13; if (string.IsNullOrEmpty(clientId) || string.IsNullOrEmpty(clientSecret)) { ErrorMessage = Resources.Resources.Client_Id_and_Client_Secret_must_be_provided; return null; } var postData = string.Format("grant_type=client_credentials&client_id={0}" + "&client_secret={1}" + "&scope=http://api.microsofttranslator.com", HttpUtility.UrlEncode(clientId), HttpUtility.UrlEncode(clientSecret)); // POST Auth data to the oauth API string res, token; try { var web = new WebClient(); web.Encoding = Encoding.UTF8; res = web.UploadString(authBaseUrl, postData); } catch (Exception ex) { ErrorMessage = ex.GetBaseException().Message; return null; } var ser = new JavaScriptSerializer(); var auth = ser.Deserialize<BingAuth>(res); if (auth == null) return null; token = auth.access_token; return token; } private class BingAuth { public string token_type { get; set; } public string access_token { get; set; } } This code basically takes the client id and secret and posts it at the oAuth endpoint which returns a JSON string. Here I use the JavaScript serializer to deserialize the JSON into a custom object I created just for deserialization. You can also use JSON.NET and dynamic deserialization if you are already using JSON.NET in your app in which case you don't need the extra type. In my library that houses this component I don't, so I just rely on the built in serializer. The auth method returns a long base64 encoded string which can be used as a bearer token in the translate API call. Translation Once you have the authentication token you can use it to pass to the translate API. The auth token is passed as an Authorization header and the value is prefixed with a 'Bearer ' prefix for the string. Here's what the simple Translate API call looks like:/// /// Uses the Bing API service to perform translation /// Bing can translate up to 1000 characters. /// /// Requires that you provide a CLientId and ClientSecret /// or set the configuration values for these two. /// /// More info on setup: /// http://www.west-wind.com/weblog/ /// /// Text to translate /// Two letter culture name /// Two letter culture name /// Pass an access token retrieved with GetBingAuthToken. /// If not passed the default keys from .config file are used if any /// public string TranslateBing(string text, string fromCulture, string toCulture, string accessToken = null) { string serviceUrl = "http://api.microsofttranslator.com/V2/Http.svc/Translate"; if (accessToken == null) { accessToken = GetBingAuthToken(); if (accessToken == null) return null; } string res; try { var web = new WebClient(); web.Headers.Add("Authorization", "Bearer " + accessToken); string ct = "text/plain"; string postData = string.Format("?text={0}&from={1}&to={2}&contentType={3}", HttpUtility.UrlEncode(text), fromCulture, toCulture, HttpUtility.UrlEncode(ct)); web.Encoding = Encoding.UTF8; res = web.DownloadString(serviceUrl + postData); } catch (Exception e) { ErrorMessage = e.GetBaseException().Message; return null; } // result is a single XML Element fragment var doc = new XmlDocument(); doc.LoadXml(res); return doc.DocumentElement.InnerText; } The first of this code deals with ensuring the auth token exists. You can either pass the token into the method manually or let the method automatically retrieve the auth code on its own. In my case I'm using this inside of a Web application and in that situation I simply need to re-authenticate every time as there's no convenient way to manage the lifetime of the auth cookie. The auth token is added as an Authorization HTTP header prefixed with 'Bearer ' and attached to the request. The text to translate, the from and to language codes and a result format are passed on the query string of this HTTP GET request against the Translate API. The translate API returns an XML string which contains a single element with the translated string. Using the Wrapper Methods It should be pretty obvious how to use these two methods but here are a couple of test methods that demonstrate the two usage scenarios:[TestMethod] public void TranslateBingWithAuthTest() { var translate = new TranslationServices(); string clientId = DbResourceConfiguration.Current.BingClientId; string clientSecret = DbResourceConfiguration.Current.BingClientSecret; string auth = translate.GetBingAuthToken(clientId, clientSecret); Assert.IsNotNull(auth); string text = translate.TranslateBing("Hello World we're back home!", "en", "de",auth); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } [TestMethod] public void TranslateBingIntegratedTest() { var translate = new TranslationServices(); string text = translate.TranslateBing("Hello World we're back home!","en","de"); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } Other API Methods The Translate API has a number of methods available and this one is the simplest one but probably also the most common one that translates a single string. You can find additional methods for this API here: http://msdn.microsoft.com/en-us/library/ff512419.aspx Soap and AJAX APIs are also available and documented on MSDN: http://msdn.microsoft.com/en-us/library/dd576287.aspx These links will be your starting points for calling other methods in this API. Dual Interface I've talked about my database driven localization provider here in the past, and it's for this tool that I added the Bing localization support. Basically I have a localization administration form that allows me to translate individual strings right out of the UI, using both Google and Bing APIs: As you can see in this example, the results from Google and Bing can vary quite a bit - in this case Google is stumped while Bing actually generated a valid translation. At other times it's the other way around - it's pretty useful to see multiple translations at the same time. Here I can choose from one of the values and driectly embed them into the translated text field. Lost in Translation There you have it. As I mentioned using the API once you have all the bureaucratic crap out of the way calling the APIs is fairly straight forward and reasonably fast, even if you have to call the Auth API for every call. Hopefully this post will help out a few of you trying to navigate the Microsoft bureaucracy, at least until next time Microsoft upends everything and introduces new ways to sign up again. Until then - happy translating… Related Posts Translation method Source on Github Translating with Google Translate without Google API Keys Creating a data-driven ASP.NET Resource Provider© Rick Strahl, West Wind Technologies, 2005-2013Posted in Localization ASP.NET .NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Creating a dynamic proxy generator – Part 1 – Creating the Assembly builder, Module builder and cach

- by SeanMcAlinden

I’ve recently started a project with a few mates to learn the ins and outs of Dependency Injection, AOP and a number of other pretty crucial patterns of development as we’ve all been using these patterns for a while but have relied totally on third part solutions to do the magic. We thought it would be interesting to really get into the details by rolling our own IoC container and hopefully learn a lot on the way, and you never know, we might even create an excellent framework. The open source project is called Rapid IoC and is hosted at http://rapidioc.codeplex.com/ One of the most interesting tasks for me is creating the dynamic proxy generator for enabling Aspect Orientated Programming (AOP). In this series of articles, I’m going to track each step I take for creating the dynamic proxy generator and I’ll try my best to explain what everything means - mainly as I’ll be using Reflection.Emit to emit a fair amount of intermediate language code (IL) to create the proxy types at runtime which can be a little taxing to read. It’s worth noting that building the proxy is without a doubt going to be slightly painful so I imagine there will be plenty of areas I’ll need to change along the way. Anyway lets get started… Part 1 - Creating the Assembly builder, Module builder and caching mechanism Part 1 is going to be a really nice simple start, I’m just going to start by creating the assembly, module and type caches. The reason we need to create caches for the assembly, module and types is simply to save the overhead of recreating proxy types that have already been generated, this will be one of the important steps to ensure that the framework is fast… kind of important as we’re calling the IoC container ‘Rapid’ – will be a little bit embarrassing if we manage to create the slowest framework. The Assembly builder The assembly builder is what is used to create an assembly at runtime, we’re going to have two overloads, one will be for the actual use of the proxy generator, the other will be mainly for testing purposes as it will also save the assembly so we can use Reflector to examine the code that has been created. Here’s the code: DynamicAssemblyBuilder using System; using System.Reflection; using System.Reflection.Emit; namespace Rapid.DynamicProxy.Assembly { /// <summary> /// Class for creating an assembly builder. /// </summary> internal static class DynamicAssemblyBuilder { #region Create /// <summary> /// Creates an assembly builder. /// </summary> /// <param name="assemblyName">Name of the assembly.</param> public static AssemblyBuilder Create(string assemblyName) { AssemblyName name = new AssemblyName(assemblyName); AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly( name, AssemblyBuilderAccess.Run); DynamicAssemblyCache.Add(assembly); return assembly; } /// <summary> /// Creates an assembly builder and saves the assembly to the passed in location. /// </summary> /// <param name="assemblyName">Name of the assembly.</param> /// <param name="filePath">The file path.</param> public static AssemblyBuilder Create(string assemblyName, string filePath) { AssemblyName name = new AssemblyName(assemblyName); AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly( name, AssemblyBuilderAccess.RunAndSave, filePath); DynamicAssemblyCache.Add(assembly); return assembly; } #endregion } } So hopefully the above class is fairly explanatory, an AssemblyName is created using the passed in string for the actual name of the assembly. An AssemblyBuilder is then constructed with the current AppDomain and depending on the overload used, it is either just run in the current context or it is set up ready for saving. It is then added to the cache. DynamicAssemblyCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions; namespace Rapid.DynamicProxy.Assembly { /// <summary> /// Cache for storing the dynamic assembly builder. /// </summary> internal static class DynamicAssemblyCache { #region Declarations private static object syncRoot = new object(); internal static AssemblyBuilder Cache = null; #endregion #region Adds a dynamic assembly to the cache. /// <summary> /// Adds a dynamic assembly builder to the cache. /// </summary> /// <param name="assemblyBuilder">The assembly builder.</param> public static void Add(AssemblyBuilder assemblyBuilder) { lock (syncRoot) { Cache = assemblyBuilder; } } #endregion #region Gets the cached assembly /// <summary> /// Gets the cached assembly builder. /// </summary> /// <returns></returns> public static AssemblyBuilder Get { get { lock (syncRoot) { if (Cache != null) { return Cache; } } throw new RapidDynamicProxyAssertionException(AssertionResources.NoAssemblyInCache); } } #endregion } } The cache is simply a static property that will store the AssemblyBuilder (I know it’s a little weird that I’ve made it public, this is for testing purposes, I know that’s a bad excuse but hey…) There are two methods for using the cache – Add and Get, these just provide thread safe access to the cache. The Module Builder The module builder is required as the create proxy classes will need to live inside a module within the assembly. Here’s the code: DynamicModuleBuilder using System.Reflection.Emit; using Rapid.DynamicProxy.Assembly; namespace Rapid.DynamicProxy.Module { /// <summary> /// Class for creating a module builder. /// </summary> internal static class DynamicModuleBuilder { /// <summary> /// Creates a module builder using the cached assembly. /// </summary> public static ModuleBuilder Create() { string assemblyName = DynamicAssemblyCache.Get.GetName().Name; ModuleBuilder moduleBuilder = DynamicAssemblyCache.Get.DefineDynamicModule (assemblyName, string.Format("{0}.dll", assemblyName)); DynamicModuleCache.Add(moduleBuilder); return moduleBuilder; } } } As you can see, the module builder is created on the assembly that lives in the DynamicAssemblyCache, the module is given the assembly name and also a string representing the filename if the assembly is to be saved. It is then added to the DynamicModuleCache. DynamicModuleCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions; namespace Rapid.DynamicProxy.Module { /// <summary> /// Class for storing the module builder. /// </summary> internal static class DynamicModuleCache { #region Declarations private static object syncRoot = new object(); internal static ModuleBuilder Cache = null; #endregion #region Add /// <summary> /// Adds a dynamic module builder to the cache. /// </summary> /// <param name="moduleBuilder">The module builder.</param> public static void Add(ModuleBuilder moduleBuilder) { lock (syncRoot) { Cache = moduleBuilder; } } #endregion #region Get /// <summary> /// Gets the cached module builder. /// </summary> /// <returns></returns> public static ModuleBuilder Get { get { lock (syncRoot) { if (Cache != null) { return Cache; } } throw new RapidDynamicProxyAssertionException(AssertionResources.NoModuleInCache); } } #endregion } } The DynamicModuleCache is very similar to the assembly cache, it is simply a statically stored module with thread safe Add and Get methods. The DynamicTypeCache To end off this post, I’m going to create the cache for storing the generated proxy classes. I’ve spent a fair amount of time thinking about the type of collection I should use to store the types and have finally decided that for the time being I’m going to use a generic dictionary. This may change when I can actually performance test the proxy generator but the time being I think it makes good sense in theory, mainly as it pretty much maintains it’s performance with varying numbers of items – almost constant (0)1. Plus I won’t ever need to loop through the items which is not the dictionaries strong point. Here’s the code as it currently stands: DynamicTypeCache using System; using System.Collections.Generic; using System.Security.Cryptography; using System.Text; namespace Rapid.DynamicProxy.Types { /// <summary> /// Cache for storing proxy types. /// </summary> internal static class DynamicTypeCache { #region Declarations static object syncRoot = new object(); public static Dictionary<string, Type> Cache = new Dictionary<string, Type>(); #endregion /// <summary> /// Adds a proxy to the type cache. /// </summary> /// <param name="type">The type.</param> /// <param name="proxy">The proxy.</param> public static void AddProxyForType(Type type, Type proxy) { lock (syncRoot) { Cache.Add(GetHashCode(type.AssemblyQualifiedName), proxy); } } /// <summary> /// Tries the type of the get proxy for. /// </summary> /// <param name="type">The type.</param> /// <returns></returns> public static Type TryGetProxyForType(Type type) { lock (syncRoot) { Type proxyType; Cache.TryGetValue(GetHashCode(type.AssemblyQualifiedName), out proxyType); return proxyType; } } #region Private Methods private static string GetHashCode(string fullName) { SHA1CryptoServiceProvider provider = new SHA1CryptoServiceProvider(); Byte[] buffer = Encoding.UTF8.GetBytes(fullName); Byte[] hash = provider.ComputeHash(buffer, 0, buffer.Length); return Convert.ToBase64String(hash); } #endregion } } As you can see, there are two public methods, one for adding to the cache and one for getting from the cache. Hopefully they should be clear enough, the Get is a TryGet as I do not want the dictionary to throw an exception if a proxy doesn’t exist within the cache. Other than that I’ve decided to create a key using the SHA1CryptoServiceProvider, this may change but my initial though is the SHA1 algorithm is pretty fast to put together using the provider and it is also very unlikely to have any hashing collisions. (there are some maths behind how unlikely this is – here’s the wiki if you’re interested http://en.wikipedia.org/wiki/SHA_hash_functions) Anyway, that’s the end of part 1 – although I haven’t started any of the fun stuff (by fun I mean hairpulling, teeth grating Relfection.Emit style fun), I’ve got the basis of the DynamicProxy in place so all we have to worry about now is creating the types, interceptor classes, method invocation information classes and finally a really nice fluent interface that will abstract all of the hard-core craziness away and leave us with a lightning fast, easy to use AOP framework. Hope you find the series interesting. All of the source code can be viewed and/or downloaded at our codeplex site - http://rapidioc.codeplex.com/ Kind Regards, Sean.

Read the article

Remove SelectedItems from a ListBox via MVVM RelayCommand

- by dthrasher

I have a list of items in a WPF ListBox. I want to allow the user to select several of these items and click a Remove button to eliminate these items from the list. Using the MVVM RealyCommand pattern, I've created a command with the following signature: public RelayCommand<IList> RemoveTagsCommand { get; private set; } My ViewModel constructor sets up an instance of the command: RemoveTagsCommand = new RelayCommand<IList>(RemoveTags, CanRemoveTags); My current implementation of RemoveTags feels clunky, with casts and copying. Is there a better way to implement this? public void RemoveTags(IList toRemove) { var collection = toRemove.Cast<Tag>(); List<Tag> copy = new List<Tag>(collection); foreach (Tag tag in copy) { Tags.Remove(tag); } }

Read the article

RDLC filtering nested tables

- by aprescott

I am creating an RDLC report where the dataset consists of several datatables. There is one parent table and several child tables. What I would like to do is display relevant data from each child table for each row in the parent table. Here is a simplified example: table1 = "Purchase" has columns PurhcaseID, PurchaseNumber, PurchaseDate table2 = "PurchasedItem" has columns PurchaseItemID, PurhcaseID, ItemDescription In my RDLC, I have a Purchase table grouped on PurchaseDate and would like to display the PurchasedItems for each Purchase. The current solution uses a subreport, but I do not like this because it leaves an ugly empty space when there is no data for the subreport display. (I would be fine with using a subreport if I could properly hide it without leaving an empty space.) I am not able to rewrite the stored procedure to return a single table, either. How are others dealing with this scenario?

Read the article

Error Building Project With NSXMLParserDelegate.

- by fuzzygoat

TurbineXMLParser.h #import <Foundation/Foundation.h> @interface TurbineXMLParser : NSObject <NSXMLParserDelegate> { ... TurbineXMLParser.m #import "TurbineXMLParser.h" I have just added a new class to my current project that I previously tested in a single file. When I try and build the project I get the error: error: cannot find protocol declaration for 'NSXMLParserDelegate' I did a bit of searching and tried adding the following ... TurbineXMLParser.h #import <Foundation/Foundation.h> @protocol NSXMLParserDelegate; @interface TurbineXMLParser : NSObject <NSXMLParserDelegate> { ... but still get the warning: warning: no definition of protocol 'NSXMLParserDelegate' is found any help would be much appreciated gary

Read the article

[Android] Change language settings (locale) for the device

- by raychenon

Hi, I know it's possible to have multiple languages in a single application through the res/string and depending on Locale. Here is a case http://stackoverflow.com/questions/2078289/android-controling-the-user-language Now how can I change the language in the phone ? Like I'd do by Menu Settings Language & Keyboard Select locale languages Is there some real code to access to these settings ? Or should I create intent for a shortcut to the language settings. Please post some code Edit : With Locale class developer.android.com/intl/fr/reference/java/util/Locale.html The constructor is at least Locale(String language) The input is language. How can you retrieve the current language used on the device ?

Read the article

Safari Extjs grid rendering issue

- by Natkeeran

Hello: Here is a simple illustration of what I mean. It works in IE, and FF, but not in Safari. I have four panels which are dynamically added to a tabpanel item. Three are grid panels, and one is a form panel. I need to preserve the grids proportions or sizes. I tried several layout methods (table, column, absolute etc), and nothing seems work so far. For table layout, all sizes end up being the same width. It seems my best bet is column layout, and they seem to render properly in FF, IE, but not in Safari as shown in the image. (Here it seems that column goes to second row, when the item does not fit into the current row). Initially, the title bar, and several of the column headings does not show. Any suggestions. Thank you.

Read the article

How to compile x64 asp.net website?

- by Eran Betzalel

I'm trying to compile (using Visual Studio) an ASP.Net website with the Chilkat library. The compilation fails due to this error: Could not load file or assembly 'ChilkatDotNet2, Version=9.0.8.0, Culture=neutral, PublicKeyToken=eb5fc1fc52ef09bd' or one of its dependencies. An attempt was made to load a program with an incorrect format. I've been told that this error occurs because of platform noncompliance. The weird thing is that although the compilation fails, the site works once accessed from a browser. My theory is that the IIS compilation uses csc.exe compiler from the Framework64 (64 bit) folder while the Visual Studio uses csc.exe compiler from the Framework (32 bit) folder. If this is acually it, how can I configure my Visual studio to run with the 64 bit compiler for ASP.Net sites? This is my current development configuration: Windows 7 (x64). Visual Studio 2008 Pro (x86 of course...). Chilkat library (x64) IIS/Asp.net (x64).

Read the article

SSIS Configuration error: Cannot retrieve configuration table schema

- by Glenn M

I'm trying to add a simple configuration to a SSIS package, of type SQL Server, so stored in a table. At the end of the wizard, when it goes to try and write a new row to the nominated table to store the configuration it fails with the error: TITLE: Microsoft Visual Studio Could not complete wizard actions. Cannot retrieve configuration table schema. (Microsoft.DataTransformationServices.Wizards) I can't seem to resolve this. The configuration connection has full permissions on the table, and it sees it and can read from it as it reports there is no current data for the filter I provide. It just wont write to it. A Google search of the error message above in quotes returns literally no hits! Any suggestions? Glenn

Read the article

Sync database with filter using SyncOrchestrator with Sync Framework 2.0

- by Flo

Hi, I want to synchronize two SQL databases. But since one of the databases only requires a subset of the data I am looking for a filter option. Is there a possibility to add a Filter to the SyncOrchestrator or do I have to add the filter to the SyncProvider? According to this: http://social.microsoft.com/Forums/en-US/uklaunch2007ado.net/thread/35d4deb8-a861-4fe3-a395-d175e14c353f it is not possible to filter with the DbSyncProvider. Quote: "I understand your scenario, and the hebavior of the DbSyncProvider is due to the current limitation. DbSyncProvider is built on top of the Microsoft Sync Framework that can support filtering. Unfortunately, DbSyncProvider does not yet." But that post is quite old, maybe that has changed now. I am working with this example at the moment: http://msdn.microsoft.com/en-us/library/cc807255.aspx but I can't figure out how to add filtering here.

Read the article

iPhone SDK: Get GPS coordinates from Google Maps

- by RaYell

In an iPhone application I'm developing I need to get GPS coordinates to perform some actions based on the values received. Users should have two possibilities of giving the location: automatically from iPhone build-in GPS by finding a specific point on a map (Google Maps) I know how to user CLLocationManager to get current position coordinates and I know how to add Google Maps using JS API. What I would like to know if how can I get coordinates for a specific point on a map that user clicks. Is that possible with UIWebView or is there any other way of getting the values I need?

Read the article

Acrobat Reader ActiveX in WebBrowser stealing focus [C#]

- by Maciej

I'm using webBrowser.Navigate(url) control to display page. I noticed this action steals focus from current control (grid) and than I have problem to focus grid back (tired myGrid.Focus, .Select etc...) This is really annoying behaviour of browser... Does anyone knows how to prevent focus stealing by Browser or (if not) hot to force to focus control back ? EDIT: I've also tried webBrowser.DocumentCompleted event to focus back to grid EDIT 2 Good case to test this is openning PDF files webBrowser.Navigate(@"C:\TEMP\test.pdf") I believe this is ActiveX issue. On first glance it looks that this is not problem with focusing control but loosing entire Form focus... EDIT 3 I tried another approach: Form keyPress event: I thought I can capture form's keyPress and move focus from WebBrowser / AdobeReader ActiveX to my control. But surprisingly event is not fired! Looks Reader taken all control and there is no way to do anything programically until you do mouse click on (at least) form's caption Any advice (s) ?

Read the article

Django not recognizing django admin urls

- by colorfulgrayscale

I just registered my models my models with django admin. I navigate to the django admin at /admin. I log in sucessfully and I can see all my models. great so far. But now if I try to click one of the links, for Ex: 'users', django gives me a 404 saying The current URL, admin/auth/user/, didn't match any of these. Its really weird because in my urls.py I have it mapped correctly (r'^admin/', include(admin.site.urls)), I have all the required middleware enabled and have these in my installed apps 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.admin', anyone have any idea? Thanks.

Read the article

Symfony/Doctrine/SfGuardPlugin: Redirect to requested page (route), and not referrer

- by Prasad

I want to be able to take the user to the requested page after login, but this does not happen with sfGuard. ** My Register action requires SignIn ;) ** On the listing page [http://cim/frontend_dev.php/] - user clicks the 'Register' link [@register = register/index] - user is taken to 'Signin' page provided by sfGuard - after sign-in, user is taken back to the Listing page (instead of Register) This is quite annoying! But logical, because the referrer is the listing page. How can I change logic to make @register the referrer? Pl help. thanks public function executeSignin($request) { $user = $this->getUser(); $this->logMessage('Signin>>> form - isAuth() '.$user->isAuthenticated(), 'info'); if ($user->isAuthenticated()) { $this->getUser()->setAttribute('tenant', $this->getUser()->getGuardUser()->sfuser->Tenant->getID()); return $this->redirect($user->getReferer($request->getReferer())); } $class = sfConfig::get('app_sf_guard_plugin_signin_form', 'sfGuardFormSignin'); $this->form = new $class(); $referer = $user->getReferer($request->getReferer()); $this->logMessage('Signin>>> referer: '.$referer, 'info'); $this->logMessage('Signin>>> referer: '.$request->getReferer(), 'info'); if ($request->isMethod('post')) { $this->form->bind($request->getParameter('signin')); if ($this->form->isValid()) { $values = $this->form->getValues(); $this->getUser()->signin($values['user'], array_key_exists('remember', $values) ? $values['remember'] : false); $this->getUser()->setAttribute('tenant', $this->getUser()->getGuardUser()->sfuser->Tenant->getID()); $this->logMessage('Signin>>> sfUrl | @homepage: '.sfConfig::get('app_sf_guard_plugin_success_signin_url','@homepage'), 'info'); return $this->redirect("" != $referer ? $referer : sfConfig::get('app_sf_guard_plugin_success_signin_url','@homepage')); } } else { if ($request->isXmlHttpRequest()) { $this->getResponse()->setHeaderOnly(true); $this->getResponse()->setStatusCode(401); return sfView::NONE; } // if we have been forwarded, then the referer is the current URL // if not, this is the referer of the current request $user->setReferer($this->getContext()->getActionStack()->getSize() > 1 ? $request->getUri() : $request->getReferer()); $this->logMessage('Signin>>> oldy: '.$request->getUri(), 'info'); $this->logMessage('Signin>>> oldy: '.$request->getReferer(), 'info'); $module = sfConfig::get('sf_login_module'); if ($this->getModuleName() != $module) { return $this->redirect($module.'/'.sfConfig::get('sf_login_action')); } $this->getResponse()->setStatusCode(401); } } Trace: May 27 10:10:14 symfony [info] {sfPatternRouting} Connect sfRoute "sf_guard_signin" (/login) May 27 10:10:14 symfony [info] {sfPatternRouting} Connect sfRoute "sf_guard_signout" (/logout) May 27 10:10:14 symfony [info] {sfPatternRouting} Connect sfRoute "sf_guard_password" (/request_password) May 27 10:10:14 symfony [info] {sfPatternRouting} Match route "register" (/register) for /register with parameters array ( 'module' => 'register', 'action' => 'index',) May 27 10:10:14 symfony [info] {sfFilterChain} Executing filter "sfGuardRememberMeFilter" May 27 10:10:14 symfony [info] {sfFilterChain} Executing filter "sfRenderingFilter" May 27 10:10:14 symfony [info] {sfFilterChain} Executing filter "sfExecutionFilter" May 27 10:10:14 symfony [info] {registerActions} Call "registerActions->executeIndex()" May 27 10:10:14 symfony [info] {sfFrontWebController} Redirect to "http://cim/frontend_dev.php/login" May 27 10:10:14 symfony [info] {sfWebResponse} Send status "HTTP/1.1 302 Found" May 27 10:10:14 symfony [info] {sfWebResponse} Send header "Location: http://cim/frontend_dev.php/login" May 27 10:10:14 symfony [info] {sfWebResponse} Send header "Content-Type: text/html; charset=utf-8" May 27 10:10:14 symfony [info] {sfWebDebugLogger} Configuration 13.39 ms (9) May 27 10:10:14 symfony [info] {sfWebDebugLogger} Factories 50.02 ms (1) May 27 10:10:14 symfony [info] {sfWebDebugLogger} Action "register/index" 1.94 ms (1) May 27 10:10:14 symfony [info] {sfWebResponse} Send content (104 o) May 27 10:10:16 symfony [info] {sfPatternRouting} Connect sfRoute "sf_guard_signin" (/login) May 27 10:10:16 symfony [info] {sfPatternRouting} Connect sfRoute "sf_guard_signout" (/logout) May 27 10:10:16 symfony [info] {sfPatternRouting} Connect sfRoute "sf_guard_password" (/request_password) May 27 10:10:16 symfony [info] {sfPatternRouting} Match route "sf_guard_signin" (/login) for /login with parameters array ( 'module' => 'sfGuardAuth', 'action' => 'signin',) May 27 10:10:16 symfony [info] {sfFilterChain} Executing filter "sfGuardRememberMeFilter" May 27 10:10:16 symfony [info] {sfFilterChain} Executing filter "sfRenderingFilter" May 27 10:10:16 symfony [info] {sfFilterChain} Executing filter "sfExecutionFilter" May 27 10:10:16 symfony [info] {sfGuardAuthActions} Call "sfGuardAuthActions->executeSignin()" May 27 10:10:16 symfony [info] {sfGuardAuthActions} Signin>>> form - isAuth() May 27 10:10:16 symfony [info] {sfGuardAuthActions} Signin>>> referer: http://cim/frontend_dev.php/ May 27 10:10:16 symfony [info] {sfGuardAuthActions} Signin>>> referer: http://cim/frontend_dev.php/ May 27 10:10:16 symfony [info] {sfGuardAuthActions} Signin>>> oldy: http://cim/frontend_dev.php/login May 27 10:10:16 symfony [info] {sfGuardAuthActions} Signin>>> oldy: http://cim/frontend_dev.php/ May 27 10:10:16 symfony [info] {sfPHPView} Render "D:/projects/cim/plugins/sfDoctrineGuardPlugin/modules/sfGuardAuth/templates/signinSuccess.php" May 27 10:10:16 symfony [info] {sfPHPView} Decorate content with "D:\projects\cim\apps\frontend\templates/layout.php" May 27 10:10:16 symfony [info] {sfPHPView} Render "D:\projects\cim\apps\frontend\templates/layout.php" May 27 10:10:16 symfony [info] {main} Get slot "title" May 27 10:10:16 symfony [info] {sfWebResponse} Send status "HTTP/1.1 401 Unauthorized" May 27 10:10:16 symfony [info] {sfWebResponse} Send header "Content-Type: text/html; charset=utf-8" May 27 10:10:16 symfony [info] {sfWebDebugLogger} Configuration 16.06 ms (10) May 27 10:10:16 symfony [info] {sfWebDebugLogger} Factories 50.00 ms (1) May 27 10:10:16 symfony [info] {sfWebDebugLogger} Action "sfGuardAuth/signin" 14.53 ms (1) May 27 10:10:16 symfony [info] {sfWebDebugLogger} View "Success" for "sfGuardAuth/signin" 34.44 ms (1) May 27 10:10:16 symfony [info] {sfWebResponse} Send content (38057 o)

Read the article

ASP.NET TextBox TextChanged event not firing in custom EditorPart

- by Ben Collins

This is a classic sort of question, I suppose, but it seems that most people are interested in having the textbox cause a postback. I'm not. I just want the event to fire when a postback occurs. I have created a webpart with a custom editorpart. The editorpart renders with a textbox and a button. Clicking the button causes a dialog to open. When the dialog is closed, it sets the value of the textbox via javascript and then does __doPostBack using the ClientID of the editorpart. The postback happens, but the TextChanged event never fires, and I'm not sure if it's a problem with the way __doPostBack is invoked, or if it's because of the way I'm setting up the event handler, or something else. Here's what I think is the relevant portion of the code from the editorpart: protected override void CreateChildControls() { _txtListUrl = new TextBox(); _txtListUrl.ID = "targetSPList"; _txtListUrl.Style.Add(HtmlTextWriterStyle.Width, "60%"); _txtListUrl.ToolTip = "Select List"; _txtListUrl.CssClass = "ms-input"; _txtListUrl.Attributes.Add("readOnly", "true"); _txtListUrl.Attributes.Add("onChange", "__doPostBack('" + this.ClientID + "', '');"); _txtListUrl.Text = this.ListString; _btnListPicker = new HtmlInputButton(); _btnListPicker.Style.Add(HtmlTextWriterStyle.Width, "60%"); _btnListPicker.Attributes.Add("Title", "Select List"); _btnListPicker.ID = "browseListsSmtButton"; _btnListPicker.Attributes.Add("onClick", "mso_launchListSmtPicker()"); _btnListPicker.Value = "Select List"; this.AddConfigurationOption("News List", "Choose the list that serves as the data source.", new Control[] { _txtListUrl, _btnListPicker }); if (this.ShowViewSelection) { _txtListUrl.TextChanged += new EventHandler(_txtListUrl_TextChanged); _ddlViews = new DropDownList(); _ddlViews.ID = "_ddlViews"; this.AddConfigurationOption("View", _ddlViews); } } protected override void OnPreRender(EventArgs e) { ScriptLink.Register(this.Page, "PickerTreeDialog.js", true); string lastSelectedListId = string.Empty; if (!this.WebId.Equals(Guid.Empty) && !this.ListId.Equals(Guid.Empty)) { lastSelectedListId = SPHttpUtility.EcmaScriptStringLiteralEncode( string.Format("SPList:{0}?SPWeb:{1}:", this.ListId.ToString(), this.WebId.ToString())); } string script = "\r\n var lastSelectedListSmtPickerId = '" + lastSelectedListId + "';" + "\r\n function mso_launchListSmtPicker(){" + "\r\n if (!document.getElementById) return;" + "\r\n" + "\r\n var listTextBox = document.getElementById('" + SPHttpUtility.EcmaScriptStringLiteralEncode(_txtListUrl.ClientID) + "');" + "\r\n if (listTextBox == null) return;" + "\r\n" + "\r\n var serverUrl = '" + SPHttpUtility.EcmaScriptStringLiteralEncode(SPContext.Current.Web.ServerRelativeUrl) + "';" + "\r\n" + "\r\n var callback = function(results) {" + "\r\n if (results == null || results[1] == null || results[2] == null) return;" + "\r\n" + "\r\n lastSelectedListSmtPickerId = results[0];" + "\r\n var listUrl = '';" + "\r\n if (listUrl.substring(listUrl.length-1) != '/') listUrl = listUrl + '/';" + "\r\n if (results[1].charAt(0) == '/') results[1] = results[1].substring(1);" + "\r\n listUrl = listUrl + results[1];" + "\r\n if (listUrl.substring(listUrl.length-1) != '/') listUrl = listUrl + '/';" + "\r\n if (results[2].charAt(0) == '/') results[2] = results[2].substring(1);" + "\r\n listUrl = listUrl + results[2];" + "\r\n listTextBox.value = listUrl;" + "\r\n __doPostBack('" + this.ClientID + "','');" + "\r\n }" + "\r\n LaunchPickerTreeDialog('CbqPickerSelectListTitle','CbqPickerSelectListText','websLists','', serverUrl, lastSelectedListSmtPickerId,'','','/_layouts/images/smt_icon.gif','', callback);" + "\r\n }"; this.Page.ClientScript.RegisterClientScriptBlock(typeof(ListPickerEditorPart), "mso_launchListSmtPicker", script, true); if ((!string.IsNullOrEmpty(_txtListUrl.Text) && _ddlViews.Items.Count == 0) || _listSelectionChanged) { _ddlViews.Items.Clear(); if (!string.IsNullOrEmpty(_txtListUrl.Text)) { using (SPWeb web = SPContext.Current.Site.OpenWeb(this.WebId)) { foreach (SPView view in web.Lists[this.ListId].Views) { _ddlViews.Items.Add(new ListItem(view.Title, view.ID.ToString())); } } _ddlViews.Enabled = _ddlViews.Items.Count > 0; } else { _ddlViews.Enabled = false; } } base.OnPreRender(e); } void _txtListUrl_TextChanged(object sender, EventArgs e) { this.SetPropertiesFromChosenListString(_txtListUrl.Text); _listSelectionChanged = true; } Any ideas? Update: I forgot to mention these methods, which are called above: protected virtual void AddConfigurationOption(string title, Control inputControl) { this.AddConfigurationOption(title, null, inputControl); } protected virtual void AddConfigurationOption(string title, string description, Control inputControl) { this.AddConfigurationOption(title, description, new List<Control>(new Control[] { inputControl })); } protected virtual void AddConfigurationOption(string title, string description, IEnumerable<Control> inputControls) { HtmlGenericControl divSectionHead = new HtmlGenericControl("div"); divSectionHead.Attributes.Add("class", "UserSectionHead"); this.Controls.Add(divSectionHead); HtmlGenericControl labTitle = new HtmlGenericControl("label"); labTitle.InnerHtml = HttpUtility.HtmlEncode(title); divSectionHead.Controls.Add(labTitle); HtmlGenericControl divUserSectionBody = new HtmlGenericControl("div"); divUserSectionBody.Attributes.Add("class", "UserSectionBody"); this.Controls.Add(divUserSectionBody); HtmlGenericControl divUserControlGroup = new HtmlGenericControl("div"); divUserControlGroup.Attributes.Add("class", "UserControlGroup"); divUserSectionBody.Controls.Add(divUserControlGroup); if (!string.IsNullOrEmpty(description)) { HtmlGenericControl spnDescription = new HtmlGenericControl("div"); spnDescription.InnerHtml = HttpUtility.HtmlEncode(description); divUserControlGroup.Controls.Add(spnDescription); } foreach (Control inputControl in inputControls) { divUserControlGroup.Controls.Add(inputControl); } this.Controls.Add(divUserControlGroup); HtmlGenericControl divUserDottedLine = new HtmlGenericControl("div"); divUserDottedLine.Attributes.Add("class", "UserDottedLine"); divUserDottedLine.Style.Add(HtmlTextWriterStyle.Width, "100%"); this.Controls.Add(divUserDottedLine); }

Read the article

Jolicloud is a Nifty New OS for Your Netbook

- by Matthew Guay

Want to breathe new life into your netbook? Here’s a quick look at Jolicloud, a unique new Linux based OS that lets you use your netbook in a whole new way. Netbooks have been an interesting category of computers. When they were first released, most netbooks came with a stripped down Linux based operating system designed to let you easily access the internet first and foremost. Consumers wanted more from their netbooks, so full OSes such as Windows XP and Ubuntu became the standard on netbooks. Microsoft worked hard to get Windows 7 working great on netbooks, and today most netbooks run Windows 7 great. But the Linux community hasn’t stood still either, and Jolicloud is proof of that. Jolicloud is a unique OS designed to bring the best of both webapps and standard programs to your netbook. Keep reading to see if this is the perfect netbook OS for you. Getting Started Installing Jolicloud on your netbook is easy thanks to a the Jolicloud Express installer for Windows. Since many netbooks run Windows by default, this makes it easy to install Jolicloud. Plus, your Windows install is left untouched, so you can still easily access all your Windows files and programs. Download and run the roughly 700Mb installer (link below) just as a normal installer in Windows. This will first extract the needed files. Click Get started to install Jolicloud on your netbook. Enter a username, password, and nickname for your computer. Please note that the username must be all lowercase, and the nickname should not contain spaces or special characters. Now you can review the default installation settings. By default it will take up 39Gb and install on your C:\ drive in English. If you wish to change this, click Change. We chose to install it on the D: drive on this netbook, as its harddrive was already partitioned into two parts. Click Save when your settings are all correct, and then click Next in the previous window. Jolicloud will prepare for the installation. This took about 5 minutes in our test. Click Next when this is finished. Click Restart now to install and run Jolicloud. When your netbook reboots, it will initialize the Jolicloud setup. It will then automatically finish the installation. Just sit back and wait; there’s nothing for you to do right now. The installation took about 20 minutes in our test. Jolicloud will automatically reboot when the setup is finished. Once it’s rebooted, you’re ready to go! Enter the username, then the password, that you chose earlier when you were installing Jolicloud from Windows. Welcome to your Jolicloud desktop! Hardware Support We installed Jolicloud on a Samsung N150 netbook with an Atom N450 processor, 1Gb Ram, 250Gb harddrive, and WiFi b/g/n with Bluetooth. Amazingly, once Jolicloud was installed, everything was ready to use. No drivers to install, no settings to hassle with, it was all installed and set up perfectly. Power settings worked great, and closing the netbook put it to sleep just like in Windows. WiFi drivers have typically been difficult to find and install on Linux, but Jolicloud had our netbook’s wifi working immediately. To get online, simply click the Wireless icon on the top right, and select the wireless network you want to connect to. Jolicloud will let you know when it is signed on. Wired Lan networking was also seamless; simply connect your cable and you’re ready to go. The webcam and touchpad also worked perfectly directly. The only thing missing was multitouch; this touchpad has two finger scroll, pinch zoom, and other nice multitouch features in Windows, but in Julicloud it only functioned as a standard touchpad. It did have tap to click activated by default, as well as right-side scrolling, which is nice. Jolicloud also supported our video card without any extra work. The native resolution was already selected, and the only problem we had with the screen was that there was no apparent way to change the brightness. This is not a major problem, but would be nice to have. The Samsung N150 has Intel GMA3150 integrated graphics, and Jolicloud promises 1080p HD video on it. It did playback 720p H.264 video flawlessly without installing anything extra, but it stuttered on full 1080p HD (which is the exact same as this netbook’s video playback in Windows 7 – 720p works great, but it stutters on 1080p). We would be excited to see full HD on this netbook, but 720p is definitely fine for most stuff. Jolicloud supports a wide range of netbooks, and based on our experience we would expect it to work as good on any supported hardware. Check out the list of supported netbooks to see if your netbook is supported; if not, it still may work but you may have to install special drivers. Jolicloud’s performance was very similar to Windows 7 on our netbook. It boots in about 30 seconds, and apps load fairly quickly. In general, we couldn’t tell much difference in performance between Jolicloud and Windows 7, though this isn’t a problem since Windows 7 runs great on the current generation of netbooks. Using Jolicloud Ready to start putting Jolicloud to use? Your fresh Jolicloud install you can run several built-in apps, such as Firefox, a calculator, and the chat client Pidgin. It also has a media player and file viewer installed, so you can play MP3s or MPG videos, or read PDF ebooks without installing anything extra. It also has Flash player installed so you can watch videos online easily. You can also directly access all of your files from the right side of your home screen. You can even access your Windows files; in our test, the 116.9 GB Media was C: from Windows. Select it to browse and open any file you had saved in Windows. You may need to enter your password to access it. Once you’re authenticated it, you’ll see all of your Windows files and folders. Your User files (Documents, Music, Videos, etc.) will be in the Users folder. And, you can easily add files from removable media such as USB flash drives and memory cards. Jolicloud recognized a flash drive we tested with no trouble at all. Add new apps But, the best part about Jolicloud is that it makes it very easy to install new apps. Click the Get Started button on your homescreen. You’ll first need to create an account. You can then use this same account on another netbook if you wish, and your settings will automatically be synced between the two. You can either signup using your Facebook account, …or you can sign up the traditional way with your email address, name, and password. If you sign up this way, you will need to confirm your email address before your account will be finished. Now, choose your netbook model from the list, and enter a name for your computer. And that’s it! You’ll now see the Jolicloud dashboard, which will show you updates and notifications from friends who also use Jolicloud. Click the App directory to find new apps for your netbook. Here you will find a variety of webapps, such as Gmail, along with native applications, such as Skype, that you can install on your netbook. Simply click the Install button on the right to add the app to your netbook. You will be prompted to enter your system password, and then the app will install without any further input. Once an app is installed, a check mark will appear beside its name. You can remove it by clicking the Remove button, and it will uninstall seamlessly. Webapps, such as Gmail, actually run in in a Chrome-powered window that lets the webapp run full screen. This gives the webapps a native feel, but actually they’re just running the same as they would in a standard web browser. The Jolicloud Interface Most apps run maximized, and there is no way to run them smaller. This in general works good, since with small screens most apps need to run full-screen anyhow. Smaller apps, such as a calculator or the Pidgin chat client, run in a window just like they do on other operating systems. You can switch to another app that’s running by selecting it’s icon on the top left, or you can go back to the home screen by clicking the home screen. If you’re finished with an program, simply click the red X button on the top right of the window when you’re running it. Or, you can switch between programs using standard keyboard shortcuts such as Alt-tab. The default page on the home screen is the favorites page, and all of your other programs are orginized in their own sections on the left hand side. But, if you want to add one of these to your favorites page, simply right-click on it and select Add to Favorites. When you’re done for the day, you can simply close your netbook to put it to sleep. Or, if you want to shut down, just press the Quit button on the bottom right of the home screen and then select Shut Down. Booting Jolicloud When you install Jolicloud, it will set itself as the default operating system. Now, when you boot your netbook, it will show you a list of installed operating systems. You can select either Windows or Jolicloud, but if you don’t make a selection it will boot into Jolicloud after waiting 10 seconds. If you’d perfer to boot into Windows by default, you can easily change this. First, boot your netbook in to Windows. Open the start menu, right-click on the Computer button, and select Properties. Click the “Advanced system settings” link on the left side. Click the Settings button in the Startup and Recovery section. Now, select Windows as the default operating system, and click Ok. Your netbook will now boot into Windows by default, but will give you 10 seconds to choose to boot into Jolicloud when you start your computer. Or, if you decided you don’t want Jolicloud, you can easily uninstall it from within Windows. Please note that this will also remove any files you may have saved in Jolicloud, so be sure to copy them to your Windows drive before uninstalling. To uninstall Jolicloud from within Windows, open Control Panel, and select Uninstall a Program. Scroll down to select Jolicloud, and click Uninstall/Change. Click Yes to confirm that you want to uninstall Jolicloud. After a few moments, it will let you know that Jolicloud has been uninstalled. You’re netbook is now back the same as it was before you installed Jolicloud, with only Windows installed. Closing Whether you’re wanting to replace your current OS on your netbook or would simply like to try out a fresh new Linux version on your netbook, Jolicloud is a great option for you. We were very impressed by it’s solid hardware support and the ease of installing new apps in Jolicloud. Rather than simply giving us a standard OS, Jolicloud offers a unique way to use your netbook with native programs and webapps. And whether you’re an IT pro or are a new computer user, Jolicloud was easy enough to use that anyone can do it. Give it a try, and let us know what your favorite netbook OS is! Link Download Jolicloud for your netbook Similar Articles Productive Geek Tips How To Change XSplash Themes in Ubuntu 9.10Verify the Integrity of Windows Vista System FilesMonitor Multiple Logs in a Single Shell with MultiTail for LinuxHide Some or All of the GUI Bars in FirefoxAsk the Readers: Do You Use a Laptop, Desktop, or Both? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Stop In The Name Of Love (Firefox addon) Chitika iPad Labs Gives Live iPad Sale Stats Heaven & Hell Finder Icon Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically

Read the article

Repercussions of enabling useLegacyV2RuntimeActivationPolicy?

- by Reed Copsey

For my current project, we're using some CLR 2 based mixed mode assemblies. In order to use these from within a .NET 4 targetted assembly, I know you have to add useLegacyV2RuntimeActivationPolicy=true to the <startup> element within app.config. I understand that this changes the activation policy, causing these mixed-mode assemblies to be loaded using the highest supported version of the CLR. However, are there any side effects to doing this? What potential issues should I watch for when enabling the non-default activation policy?

Read the article

MSBuild cannot find SGen when compiling a solution

- by Jaxidian

I've looked at several other SGen-related questions on here and either their answers don't apply or their answers don't fix this for me. I have installed several SDKs to fix this issue with no luck. Reference types should not be changed since this is the only place this is a problem. Once suggestion is to put SGen.exe into the C:\Windows\Microsoft.NET\Framework\v3.5 folder, but that's not been done on the box where this is not a problem. In this scenario, SGen.exe actually exists and is right where it's supposed to be, but MSBuild still is having issues with finding it for some reason! Background: We have a NAnt script that automates our builds. In this scenario, NAnt is calling MSBuild and MSBuild is generating the error claiming to be unable to find SGen. The project is .NET 3.5-based. I have my primary dev environment (64-bit Vista Ultimate) where the script works perfectly and I am attempting to duplicate it in a VM (64-bit Win 7 Ultimate). I THINK I have everything to the point where I should be good-to-go but this fails on the Win7 box (works perfectly on the Vista box). I have done some comparisons between the two boxes and they both look identical in this regard, but it still fails. For example, the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework's sdkInstallRootv2.0 value is set to C:\Program Files\Microsoft.NET\SDK\v2.0 64bit\ on both machines. In both machines, SGen.exe is in that path's bin subdirectory. NAnt Script: <target name="report-installer" depends="fail-if-environment-not-set"> <exec program="MSBuild.exe" basedir="${framework35.directory}"> <arg value="${tools.directory.current}\ReportInstaller\ReportInstaller.sln" /> <arg value="/p:Configuration=${buildconfiguration.current}" /> </exec> </target> The error message I get is this: report-installer: [exec] Microsoft (R) Build Engine Version 3.5.30729.4926 [exec] [Microsoft .NET Framework, Version 2.0.50727.4927] [exec] Copyright (C) Microsoft Corporation 2007. All rights reserved. [exec] [exec] Build started 4/8/2010 11:28:23 AM. [exec] Project "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.sln" on node 0 (default targets). [exec] Building solution configuration "Release|Any CPU". [exec] Project "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.sln" (1) is building "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.csproj" (2) on node 0 (default targets). [exec] Could not locate the .NET Framework SDK. The task is looking for the path to the .NET Framework SDK at the location specified in the SDKInstallRootv2.0 value of the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework. You may be able to solve the problem by doing one of the following: 1.) Install the .NET Framework SDK. 2.) Manually set the above registry key to the correct location. [exec] CoreCompile: [exec] Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. [exec] C:\Windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targets(1902,9): error MSB3091: Task failed because "sgen.exe" was not found, or the .NET Framework SDK v2.0 is not installed. The task is looking for "sgen.exe" in the "bin" subdirectory beneath the location specified in the SDKInstallRootv2.0 value of the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework. You may be able to solve the problem by doing one of the following: 1.) Install the .NET Framework SDK v2.0. 2.) Manually set the above registry key to the correct location. 3.) Pass the correct location into the "ToolPath" parameter of the task. [exec] Done Building Project "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.csproj" (default targets) -- FAILED. [exec] Done Building Project "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.sln" (default targets) -- FAILED. [exec] [exec] Build FAILED. [exec] [exec] "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.sln" (default target) (1) -> [exec] "C:\Projects\Production\Tools\ReportInstaller\ReportInstaller.csproj" (default target) (2) -> [exec] (GenerateSerializationAssemblies target) -> [exec] C:\Windows\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targets(1902,9): error MSB3091: Task failed because "sgen.exe" was not found, or the .NET Framework SDK v2.0 is not installed. The task is looking for "sgen.exe" in the "bin" subdirectory beneath the location specified in the SDKInstallRootv2.0 value of the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework. You may be able to solve the problem by doing one of the following: 1.) Install the .NET Framework SDK v2.0. 2.) Manually set the above registry key to the correct location. 3.) Pass the correct location into the "ToolPath" parameter of the task. [exec] [exec] 0 Warning(s) [exec] 1 Error(s) [exec] [exec] Time Elapsed 00:00:00.24 [call] C:\Projects\Production\Source\reports.build(15,4): [call] External Program Failed: C:\Windows\Microsoft.NET\Framework\v3.5\MSBuild.exe (return code was 1) What am I doing wrong here that is causing MSBuild to STILL be unable to find SGen?

Read the article

Run VBA macro when condition is met

- by Pieter

Hello all, I'm creating a spreadsheet to train my numerical skills. Now, I use VBA macros to generate a new problem once the current one has been correctly solved. To do so, I still have to press a button in the worksheet, which costs time and is annoying. Is there a way that I can execute a macro when a certain condition is met? for instance: if A1 = "correct!" then <run macro> else <do nothing> Also, let me know if you're interested in the spreadsheet, I'd be happy to share it with you guys. best, Pieter

Read the article

NHibernate: Collection was modified; enumeration operation may not execute

- by Daoming Yang

Hi All, I'm currently struggling with this "Collection was modified; enumeration operation may not execute" issue. I have searched about this error message, and it's all related to the foreach statement. I do have the some foreach statements, but they are just simply representing the data. I did not using any remove or add inside the foreach statement. NOTE: The error randomly happens (about 4-5 times a day). The application is the MVC website. There are about 5 users operate this applications (about 150 orders a day). Could it be some another users modified the collection, and then occur this error? I have log4net setup and the settings can be found here Make sure that the controller has a parameterless public constructor I do have parameterless public constructor in AdminProductController Does anyone know why this happen and how to resolve this issue? A friend (Oskar) mentioned that "Theory: Maybe the problem is that your configuration and session factory is initialized on the first request after application restart. If a second request comes in before the first request is finished, maybe it will also try to initialize and then triggering this problem somehow." Many thanks. Daoming Here is the error message: System.InvalidOperationException Collection was modified; enumeration operation may not execute. System.InvalidOperationException: An error occurred when trying to create a controller of type 'WebController.Controllers.Admin.AdminProductController'. Make sure that the controller has a parameterless public constructor. --- System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. --- NHibernate.MappingException: Could not configure datastore from input stream DomainModel.Entities.Mappings.OrderProductVariant.hbm.xml --- System.InvalidOperationException: Collection was modified; enumeration operation may not execute. at System.Collections.ArrayList.ArrayListEnumeratorSimple.MoveNext() at System.Xml.Schema.XmlSchemaSet.AddSchemaToSet(XmlSchema schema) at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, XmlSchema schema) at System.Xml.Schema.XmlSchemaSet.Add(XmlSchema schema) at NHibernate.Cfg.Configuration.LoadMappingDocument(XmlReader hbmReader, String name) at NHibernate.Cfg.Configuration.AddInputStream(Stream xmlInputStream, String name) --- End of inner exception stack trace --- at NHibernate.Cfg.Configuration.LogAndThrow(Exception exception) at NHibernate.Cfg.Configuration.AddInputStream(Stream xmlInputStream, String name) at NHibernate.Cfg.Configuration.AddResource(String path, Assembly assembly) at NHibernate.Cfg.Configuration.AddAssembly(Assembly assembly) at DomainModel.RepositoryBase..ctor() at WebController.Controllers._baseController..ctor() at WebController.Controllers.Admin.AdminProductController..ctor() at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache) --- End of inner exception stack trace --- at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache) at System.Activator.CreateInstance(Type type, Boolean nonPublic) at System.Web.Mvc.DefaultControllerFactory.GetControllerInstance(RequestContext requestContext, Type controllerType) --- End of inner exception stack trace --- at System.Web.Mvc.DefaultControllerFactory.GetControllerInstance(RequestContext requestContext, Type controllerType) at System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) at System.Web.Mvc.MvcHandler.ProcessRequestInit(HttpContextBase httpContext, IController& controller, IControllerFactory& factory) at System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContextBase httpContext, AsyncCallback callback, Object state) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) UPDATE CODE: In my Global.asax.cs, I'm doing this: protected void Application_BeginRequest(object sender, EventArgs e) { ManagedWebSessionContext.Bind(HttpContext.Current, SessionManager.SessionFactory.OpenSession()); } protected void Application_EndRequest(object sender, EventArgs e) { ISession session = ManagedWebSessionContext.Unbind(HttpContext.Current, SessionManager.SessionFactory); if (session != null) { try { if (session.Transaction != null && session.Transaction.IsActive) { session.Transaction.Rollback(); } else { session.Flush(); } } finally { session.Close(); } } } In the SessionManager class, I'm doing: public class SessionManager { private readonly ISessionFactory sessionFactory; public static ISessionFactory SessionFactory { get { return Instance.sessionFactory; } } private ISessionFactory GetSessionFactory() { return sessionFactory; } public static SessionManager Instance { get { return NestedSessionManager.sessionManager; } } public static ISession OpenSession() { return Instance.GetSessionFactory().OpenSession(); } public static ISession CurrentSession { get { return Instance.GetSessionFactory().GetCurrentSession(); } } private SessionManager() { Configuration config = new Configuration().Configure(); config.AddAssembly(Assembly.GetExecutingAssembly()); sessionFactory = config.BuildSessionFactory(); } class NestedSessionManager { internal static readonly SessionManager sessionManager = new SessionManager(); } } In the Repository, I'm doing this: public IEnumerable<User> GetAll() { ICriteria criteria = SessionManager.CurrentSession.CreateCriteria(typeof(User)); return criteria.List<User>(); } In the Controller, I'm doing this: public class UserController : _baseController { IUserRoleRepository _userRoleRepository; internal static readonly ILogger log = LogManager.GetLogger(typeof(UserController)); public UserController() { _userRoleRepository = new UserRoleRepository(); } public ActionResult UserList() { var myList = _usersRepository.GetAll(); return View(myList); } }

Read the article

CruiseControl.NET: using $(CCNetLabel ) inside ccnet.config file

- by minty

When calling external processes like MSBuild cruise control sets environment variables. One of values is CCNetLabel. it holds the value of the current projects label. I want to use the same values in ccnet config itself but when I try ccnet config has a problem. I get the following error: [CCNet Server:ERROR] INTERNAL ERROR: Reference to unknown symbol CCNetLabel ---------- ThoughtWorks.CruiseControl.Core.Config.Preprocessor.EvaluationException: Reference to unknown symbol CCNetLabel at ThoughtWorks.CruiseControl.Core.Config.Preprocessor.ConfigPreprocessorEnvironment._GetConstantDef(String name) at ThoughtWorks.CruiseControl.Core.Config.Preprocessor.ConfigPreprocessorEnvironment.eval_text_constant(String name) ..... ---------- I actually want to append the CCNetLabel to another variable so I need to access the property in ccnet.config. is there a different way to reference these variables?

Read the article

UIWebView frame resize does not resize the inner content...

- by Markus Gömmel

Hi, if I change the frame of a UIWebView (scalesPageToFit property is YES), what do I have to do that the zooming level of a currently displayed webpage persists? Let's say I have a UIWebView frame with a width of 200 pixels, and has zoomed into a website so that only one column is visible. After changing the width to 300, I still see the column with the same size, and additional space at the left and right. But what I would need is that I still only see this column, but bigger. Any ideas what I have to do to achive this? I tried a lot of things, but nothing worked so far. By the way, the iPhone built in Safari browser does exactly this thing (with the same website, so it's not content related) when rotating the iPhone... I see the same content, bug bigger, NOT more content as it happens with my current version of code. Thanks for helping! Markus

Read the article

Getting started with Exchange Web Services 2010

- by Adam Tuttle

I've been tasked with writing a SOAP web-service in .Net to be middleware between EWS2010 and an application server that previously used WebDAV to connect to Exchange. (As I understand it, WebDAV is going away with EWS2010, so the application server will no longer be able to connect as it previously did, and it is exponentially harder to connect to EWS without WebDAV. The theory is that doing it in .Net should be easier than anything else... Right?!) My end goal is to be able to get and create/update email, calendar items, contacts, and to-do list items for a specified Exchange account. (Deleting is not currently necessary, but I may build it in for future consideration, if it's easy enough). I was originally given some sample code, which did in fact work, but I quickly realized that it was outdated. The types and classes used appear nowhere in the current documentation. For example, the method used to create a connection to the Exchange server was: ExchangeService svc = new ExchangeService(); svc.Credentials = new WebCredentials(AuthEmailAddress, AuthEmailPassword); svc.AutodiscoverUrl(AutoDiscoverEmailAddress); For what it's worth, this was using an assembly that came with the sample code: Microsoft.Exchange.WebServices.dll ("MEWS"). Before I realized that this wasn't the current standard way to accomplish the connection, and it worked, I tried to build on it and add a method to create calendar items, which I copied from here: static void CreateAppointment(ExchangeServiceBinding esb) { // Create the appointment. CalendarItemType appointment = new CalendarItemType(); ... } Right away, I'm confronted with the difference between ExchangeService and ExchangeServiceBinding ("ESB"); so I started Googling to try and figure out how to get an ESB definition so that the CreateAppointment method will compile. I found this blog post that explains how to generate a proxy class from a WSDL, which I did. Unfortunately, this caused some conflicts where types that were defined in the original Assembly, Microsoft.Exchange.WebServices.dll (that came with the sample code) overlapped with Types in my new EWS.dll assembly (which I compiled from the code generated from the services.wsdl provided by the Exchange server). I excluded the MEWS assembly, which only made things worse. I went from a handful of errors and warnings to 25 errors and 2,510 warnings. All kinds of types and methods were not found. Something is clearly wrong, here. So I went back on the hunt. I found instructions on adding service references and web references (i.e. the extra steps it takes in VS2008), and I think I'm back on the right track. I removed (actually, for now, just excluded) all previous assemblies I had been trying; and I added a service reference for https://my.exchange-server.com/ews/services.wsdl Now I'm down to just 1 error and 1 warning. Warning: The element 'transport' cannot contain child element 'extendedProtectionPolicy' because the parent element's content model is empty. This is in reference to a change that was made to web.config when I added the service reference; and I just found a fix for that here on SO. I've commented that section out as indicated, and it did make the warning go away, so woot for that. The error hasn't been so easy to get around, though: Error: The type or namespace name 'ExchangeService' could not be found (are you missing a using directive or an assembly reference?) This is in reference to the function I was using to create the EWS connection, called by each of the web methods: private ExchangeService getService(String AutoDiscoverEmailAddress, String AuthEmailAddress, String AuthEmailPassword) { ExchangeService svc = new ExchangeService(); svc.Credentials = new WebCredentials(AuthEmailAddress, AuthEmailPassword); svc.AutodiscoverUrl(AutoDiscoverEmailAddress); return svc; } This function worked perfectly with the MEWS assembly from the sample code, but the ExchangeService type is no longer available. (Nor is ExchangeServiceBinding, that was the first thing I checked.) At this point, since I'm not following any directions from the documentation (I couldn't find anywhere in the documentation that said to add a service reference to your Exchange server's services.wsdl -- but that does seem to be the best/farthest I've gotten so far), I feel like I'm flying blind. I know I need to figure out whatever it is that should replace ExchangeService / ExchangeServiceBinding, implement that, and then work through whatever errors crop up as a result of that switch... But I have no idea how to do that, or where to look for how to do it. Googling "ExchangeService" and "ExchangeServiceBinding" only seem to lead back to outdated blog posts and MSDN, neither of which has proven terribly helpful thus far. Help me, Obi-Wan, you're my only hope!

Read the article

Setup Custom Portal & Content Enabled Domain

- by Stefan Krantz

When overlooking the past year we have seen a large increase in deployments where only some parts of the WebCenter Suite infrastructure has been used. The most common from my personal perspective is a domain topology that includes: WebCenter Custom Portal, WebCenter Content and Oracle HTTP ServicesToday its very common to see installation where the whole suite is installed when the use case only requires the custom portal and some sub component like WebCenter Content. This post will go into detail on how to minimize the deployment time and effort by only laying down the necessary managed servers needed, by following this proposed method you will minimize the configuration steps and only install the required components and schema's, configure only the necessary components and minimize the impact of architectural changes through reduced dependencies. Assumptions: Oracle 11g Database installed SYS or equivalent access to Database to setup schema's via RCU Running Operating System supporting JDK 7 Update 2 (Check support matrix here) Good understanding of WebLogic Architecture Binaries: Oracle JDK 7 Update 2 (1.7.0_02) (Download) Oracle WebLogic 10.3.6 (Download) Oracle WebCenter Binaries (11.1.1.6) (Download) Oracle WebCenter Content Binaries (11.1.1.6) (Download 1) (Download 2) Oracle HTTP Services (11.1.1.6) (Download) Oracle Repository Creation Utility (11.1.1.6) (Download Linux or Windows) Schema's: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} MDS - Meta Data Services (WebCenter and OWSM) WebCenter (WebCenter Schema) OCS (Oracle WebCenter Content) Activities (WebCenter Activities) OPSS (Policy Store for WebCenter) Installation Structure: - [Installation Home]/Middleware - Oracle_WC1 (WebCenter Installation) - Oracle_WT1 (Oracle WebTier) - Oracle_ECM (WebCenter Content) - wlserver_10.3 (Weblogic installation)- [Installation Home]/domains - webcenter (WebCenter Domain) - instances (OHS/OPMN instance)- [Installation Home]/applications- [Installation Home]/JDK1.7.0_02 Installation and Configuration Steps: Install Java and configure Java Home Extract the Java Installable (jdk-7u2-linux-x64) to [Installation Home]/JDK1.7.0_02 Add JAVA_HOME to Environment Settings (JAVA_HOME=[Installation Home]/JDK1.7.0_02) Update PATH in Environment Settings (PATH=$JAVA_HOME/bin:$PATH) Install WebLogic Server (Middleware Home) Run the installer / execute jar file (java - jar wls1036_generic.jar) Create the Middleware Home under [Installation Home]/Middleware Install WebCenter Portal (Extend Middleware Home) Extract the compressed file (ofm_wc_generic_11.1.1.6.0_disk1_1of1.zip) to a temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller -jreLoc $JAVA_HOME) Make sure to install in following structure ([Installation Home]/Middleware/Oracle_WC1) Install WebCenter Content (Extend Middleware Home) Extract the compressed files (ofm_wcc_generic_11.1.1.6.0_disk1_1of2.zip & ofm_wcc_generic_11.1.1.6.0_disk1_2of2.zip) to the same temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller -jreLoc $JAVA_HOME) Make sure to install in following structure ([Installation Home]/Middleware/Oracle_ECM) Configure Initial Domain (Domain name webcenter) Execute configuration tool - [Installation Home]/Middleware/wlserver_10.3/common/bin/config Select "Create a New Weblogic Domain" Select following template (Basic Weblogic Server Domain, Oracle Enterprise Manager, Oracle WSM Policy Manager, Oracle JRF) Create new domain with name webcenter under following location ([Installation Home]/domains) for applications ([Installation Home]/applications) Select Production Mode Finish Configuration wizard Setup username for startup scripts - Add a new file called boot.properties to ([Installation Home]/domains/webcenter/servers/AdminServer/security)Add following lines to boot.propertiesusername=weblogicpassword=[password clear text, it will be encrypted during first start] Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Install and Configure Oracle WebTier (OHS Server) Extract compressed file (ofm_webtier_linux_11.1.1.6.0_64_disk1_1of1.zip) to a temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller) Select Install & Configure option Deselect Oracle WebCache Auto Configure Ports Configure Schema's with RCU (Repository Creation Utility) Extract compressed file (ofm_rcu_linux_11.1.1.6.0_disk1_1of1.zip) to a temp folder Execute rcu with following command ([temp]/rcuHome/rcu) Make sure database meets RCU requirements, particular (PROCESSES is 200 or more) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Using SQLPLUS and sys user tou can update this configuration in the database with following procedure:ALTER SYSTEM SET PROCESSES=200 SCOPE=SPFILE shutdown immediate startup Create and Configure following schemas:MDS - Meta Data Services (WebCenter and OWSM)WebCenter (WebCenter Schema)OCS (Oracle WebCenter Content)Activities (WebCenter Activities)OPSS (Policy Store for WebCenter) Remember selected schema prefix and password (will be used later) Configure WebCenter Portal instance (WC_CustomPortal) Execute following command to start configuration wizard ([Installation Home]/Middleware/Oracle_WC1/common/bin/config) Select Extend an Existing WebLogic domain Select the existing webcenter domain ([Installation Home]/domains/webcenter) Select Extend my domain using existing extension templateBrowse to ([Installation Home]/Middleware/Oracle_WC1/common/templates/applications)Select oracle.wc_custom_portal_template_11.1.1.jar Select to configure (Managed Servers/Clusters/Machines) On the Managed Server Screen you can now configure 1 or more WC_CustomPortal managed servers (name them WC_CustomPortal[n] (skip numbering if not clustered)) In case of two WC_CustomPortal Servers then create a Cluster (any name) and make sure the managed servers join the new cluster Create a new machine with same name as the current machine Make sure the AdminServer and WC_CustomPortal[n] managed servers joins the machine Finish the configuration wizard Stop AdminServer ([Installation Home]/domains/webcenter/bin/stopWeblogic) Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Start WC_CustomPortal in the foreground (([Installation Home]/domains/webcenter/bin/startManagedServer WC_CustomPortal))- repeat for each WC_CustomPortal instance on the host Give credentials for weblogic user on start up Copy folder security including file boot.properties - from ([Installation Home]/domains/webcenter/servers/AdminServer/) to ([Installation Home]/domains/webcenter/servers/WC_CustomPortal/) Result should be ([Installation Home]/domains/webcenter/servers/WC_CustomPortal/security/boot.properties) Configure WebCenter Content instance (UCM_server1) Execute following command to start configuration wizard ([Installation Home]/Middleware/Oracle_ECM/common/bin/config) Select Extend an Existing WebLogic domain Select Oracle Universal Content Management - Content Server Select to configure (Managed Servers/Clusters/Machines) On Managed Server Screen create only one managed server instance (UCM_server1 on port 16200 (you can select any other available port)) Make sure the UCM_server1 managed server joins the machine Finish the configuration wizard Stop AdminServer ([Installation Home]/domains/webcenter/bin/stopWeblogic) Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Start UCM_server1 in the foreground ([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1)Give credentials for weblogic user on start up Copy folder security including file boot.properties - from ([Installation Home]/domains/webcenter/servers/AdminServer/) to ([Installation Home]/domains/webcenter/servers/UCM_server1/ Result should be ([Installation Home]/domains/webcenter/servers/UCM_server1/security/boot.properties) Post Configure WebCenter Content instance for WebCenter Portal Open a browser where you have support for Java applets - navigate to http://host:port/cs WARNING: The page that you are presented with after authentication will only appear once for each instance WARNING: Make sure you set correct storage options - also remember to consider file sharing options if you like to cluster your Content Server instance over multiple hosts Set an appropriate Auto number prefix Update the Server Socket Port: Commonly set to (4444) used for RIDC communication (a requirement for WebCenter Portal) Update the IP Address Filter to include the IP that is planned to access the server over RIDC - at the minimum add the ip address of the current host (this option can be updated later via EM) Stop UCM_server1 ([Installation Home]/domains/webcenter/bin/stopManagedServer UCM_server1) Start UCM_server1 in the background([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1) Open a browser where you have support for Java applets - navigate to http://host:port/cs Navigate to Administration/Admin Server Go to General ConfigurationCheck Enable AccountsIn Additional Configuration Variables (Add on two lines) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} AllowUpdateForGenwww=1CollectionUseCache=1 Save the changes and go to Component Manager Click on the link advanced component manager Enable following components Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Folders_g, WebCenterConfigure, SiteStudio, SiteStudioExternalApplications, DBSearchContainsOpSupport WARNING: Make sure that following component is disabled: FrameworkFolders Stop UCM_server1 ([Installation Home]/domains/webcenter/bin/stopManagedServer UCM_server1) Start UCM_server1 in the background([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1) Open a browser where you have support for Java applets - navigate to http://host:port/cs Navigate to Administration/Site Studio Administration and update - Do not forget to save and submit each page Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Set Default ProjectSet Default WebAssets Post Configure Oracle WebTier (OHS) to include Content Server and WebCenter Portal application context Update following file - [Installation Home]/domains/instances/instance1/config/OHS/ohs1/mod_wl_ohs.conf For single add lines from following example: Link For clustered environment add lines from following template (note the clustering in example on applies to WC_CustomPortal): Link For more information on this: http://docs.oracle.com/cd/E23943_01/core.1111/e12037/contentsvr.htm#WCEDG318 Optional - Configure JOC Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Follow instructions: http://docs.oracle.com/cd/E23943_01/core.1111/e12037/extend_wc.htm#WCEDG264 Optional (Recommended) - Configure Node Manager Follow instructions: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} http://docs.oracle.com/cd/E23943_01/core.1111/e12037/node_manager.htm#WCEDG277 Optional (Mandatory for clustered environments) - Re-Associate Policy Store to Database or OID Follow instructions: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} http://docs.oracle.com/cd/E23943_01/webcenter.1111/e12405/wcadm_security_credstore.htm#CFHDEDJH Optional - Configure Coherence for Content Presenter Follow instructions in Blog Post (This post is for PS4): https://blogs.oracle.com/ATEAM_WEBCENTER/entry/enabling_coherence_for_content_presenter Other Recommended Post Cloning WebCenter Custom Portal - https://blogs.oracle.com/ATEAM_WEBCENTER/entry/cloning_a_webcenter_portal_managedImproving WebCenter Performance through caching - https://blogs.oracle.com/ATEAM_WEBCENTER/entry/improving_webcenter_performance

Search Results

Search found 21277 results on 852 pages for 'cursor current'.

Page 494/852 | < Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501 | Next Page >

- by Cody Brocious

- by Rick Strahl

- by SeanMcAlinden

- by dthrasher

- by aprescott

- by fuzzygoat

- by raychenon

- by Natkeeran

- by Eran Betzalel

- by Glenn M

- by Flo

- by RaYell

- by Maciej

- by colorfulgrayscale

- by Prasad

- by Ben Collins

- by Matthew Guay

- by Reed Copsey

- by Jaxidian

- by Pieter

- by Daoming Yang

- by minty

- by Markus Gömmel

- by Adam Tuttle

- by Stefan Krantz

< Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501 | Next Page >