Search Results

Search found 42998 results on 1720 pages for 'html input'.

Page 494/1720 | < Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >

  • L2TP iptables port forward

    - by The_cobra666
    Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and give's out an IP in the range: 192.168.3.0. Local network range is 192.168.2.0/24 I added the route: with route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13 (the vpn server) iptables -t nat -A PREROUTING -p udp --dport 1701 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 1701 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 500 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 4500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 4500 -j ACCEPT iptables -t nat -A PREROUTING -p 50 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 50 -j ACCEPT iptables -t nat -A PREROUTING -p 51 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 51 -j ACCEPT The whole iptables script is (without the line's from above): echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv4/tcp_syncookies #Flush table's iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -t nat -F #Drop traffic iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT #verkeer naar buiten toe laten en nat aanzetten iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE #RDP forward voor windows servers iptables -t nat -A PREROUTING -p tcp --dport 3389 -i eth0 -j DNAT --to 192.168.2.10:3389 iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 3340 -i eth0 -j DNAT --to 192.168.2.12:3340 iptables -A FORWARD -p tcp --dport 3340 -j ACCEPT #toestaan SSH verkeer iptables -t nat -A PREROUTING -p tcp --dport 22 -i eth0 -j DNAT --to-destination 192.168.2.1 iptables -A INPUT -p tcp --dport 22 -j ACCEPT #toestaan verkeer loopback iptables -A INPUT -i lo -j ACCEPT #toestaan lokaal netwerk iptables -A INPUT -i eth1 -j ACCEPT #accepteren established traffic iptables -A INPUT -i eth0 --match state --state RELATED,ESTABLISHED -j ACCEPT #droppen ICMP boodschappen iptables -A INPUT -p icmp -i eth0 -m limit --limit 10/minute -j ACCEPT iptables -A INPUT -p icmp -i eth0 -j REJECT ifconfig eth1 192.168.2.1/24 ifconfig eth0 XXXXXXXXXXXXX/30 ifconfig eth0 up ifconfig eth1 up route add default gw XXXXXXXXXXXXXXXXXXX route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13

    Read the article

  • 403 forbidden .htaccess issue

    - by Gkhan14
    I have this .htaccess file in one directory on my site: <limit GET> order deny,allow deny from all allow from 123.456.789 </limit> ErrorDocument 403 403.html It blocks everyone except for one IP. However, when an invalid IP visits, it does not show the 403.html file, but it just shows the text "403.html" on the page. When I try to directly visit the 403.html page on the directory, it gets the same message too.

    Read the article

  • Compress with Gzip or Deflate my CSS & JS files

    - by muhammad usman
    i ve a fashion website & using wordpress. I want to Compress or Gzip or Deflate my CSS & JS files. i have tried many codes with .htaccess to compress but not working. Would any body help me please? My phpinfo is http://deemasfashion.co.uk/1.php below are the codes i have tried not not working. Few of them might be same but there is a difference in the syntax. <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file .(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> other code I have tried but not working... <files *.css> SetOutputFilter DEFLATE </files> <files *.js> SetOutputFilter DEFLATE </files> I have also tried this code as well but no success. <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file \.(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> This code is also not working <FilesMatch "\.(html?|txt|css|js|php|pl)$"> SetOutputFilter DEFLATE </FilesMatch> Here is another code not working. <ifmodule mod_deflate.c> AddOutputFilterByType DEFLATE text/text text/html text/plain text/xml text/css application/x- javascript application/javascript </ifmodule> Here is another code not working. <IFModule mod_deflate.c> <filesmatch "\.(js|css|html|jpg|png|php)$"> SetOutputFilter DEFLATE </filesmatch> </IFModule> Here is another code not working. <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css application/x-javascript text/javascript application/javascript application/json <FilesMatch "\.(css|js)$" > SetOutputFilter DEFLATE </FilesMatch> </IfModule> Here is another code not working. #Gzip - compress text, html, javascript, css, xml <ifmodule mod_deflate.c> AddOutputFilterByType DEFLATE text/plain AddOutputFilterByType DEFLATE text/html AddOutputFilterByType DEFLATE text/xml AddOutputFilterByType DEFLATE text/css AddOutputFilterByType DEFLATE application/xml AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE application/rss+xml AddOutputFilterByType DEFLATE application/javascript AddOutputFilterByType DEFLATE application/x-javascript </ifmodule> #End Gzip Here is another code not working. <Location /> SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary SetEnvIfNoCase Request_URI \.(?:exe|t?gz|zip|gz2|sit|rar)$ no-gzip dont-vary </Location>

    Read the article

  • Font Substitution - How Does It Work?

    - by Hutch
    Let's say I open Outlook and compose an email and choose a totally random font and hit send. Let's assume I have Outlook set to send in HTML format, and my mail server sends HTML and the recipients server receives HTML, and their client displays HTML etc. However, let's assume their PC doesn't have the font I chose installed (could be Windows, Mac, Linux, anything). What happens next with regards to how it chooses a font to display the message?

    Read the article

  • How to iptables forward ppp0 to eth0

    - by HPHPHP2012
    need your help with get it routing properly. I've server with eth0 (external interface) and eth1(internal interface). eth1 is merged into the bridge br0 (172.16.1.1) I've installed the pptp and successfully configured it, so I got ppp0 interface (192.168.91.1) and got my VPN clients successfully connected. So I need your help to manage how to allow my VPN clients use internet connection (eth0). Below my configuration files, any help is much appreciated! Thank you! P.S. VPN clients are Windows Xp, Windows 7, Mac OS X Lion, Ubuntu 12.04, iOS 5.x cat /etc/pptpd.conf #local server ip address localip 192.168.91.1 #remote addresses remoteip 192.168.91.11-254,192.168.91.10 #translating ip addresses on this interface bcrelay br0 cat /etc/ppp/pptpd-options name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 8.8.8.8 ms-dns 8.8.4.4 nodefaultroute lock nobsdcomp auth logfile /var/log/pptpd.log cat /etc/nat-up #!/bin/sh SERVER_IP="aaa.aaa.aaa.aaa" LOCAL_IP="172.16.1.1" #eth0 with public ip PUBLIC="eth0" #br0 is internal bridge on eth1 interface INTERNAL="br0" #vpn VPN="ppp0" #local LOCAL="lo" iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT echo 1 > /proc/sys/net/ipv4/ip_forward iptables -A INPUT -i $LOCAL -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i $PUBLIC -j ACCEPT ####CLEAR CONFIG#### #iptables -A FORWARD -i $PUBLIC -o $INTERNAL -m state --state ESTABLISHED,RELATED -j ACCEPT #iptables -A FORWARD -i $PUBLIC -o $INTERNAL -j ACCEPT #iptables -A FORWARD -i $INTERNAL -o $PUBLIC -j ACCEPT #iptables -t nat -A POSTROUTING -j MASQUERADE ####THIS PART IS NOT HANDLING IT#### iptables -A FORWARD -i $PUBLIC -o $VPN -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i $PUBLIC -o $VPN -j ACCEPT iptables -A FORWARD -s 192.168.91.0/24 -o $PUBLIC -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.91.0/24 -o $PUBLIC -j MASQUERADE # VPN - PPTPD iptables -A INPUT -p gre -s 0/0 -j ACCEPT iptables -A OUTPUT -p gre -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A INPUT -p tcp -s 0/0 --dport 1723 -j ACCEPT #SSH iptables -A INPUT -p tcp --dport 2222 -j ACCEPT iptables -A OUTPUT -p tcp --sport 2222 -j ACCEPT #BLACKLIST BLOCKDB="/etc/ip.blocked" IPS=$(grep -Ev "^#" $BLOCKDB) for i in $IPS do iptables -A INPUT -s $i -j DROP iptables -A OUTPUT -d $i -j DROP done

    Read the article

  • VPN pptp connection Unable to pass through linux iptables

    - by user221844
    I have set up a windows VPN server behind Linux - Ubuntu box that is working as firewall and proxy server. Now I want people from outside to be able to connect to the VPN server, but the connection is not being established and I get on the client an error 619. I have checked the problem on the internet and it seems a firewall issue. what should I do to make the connection established through the firewall? here is below the information about my setup Firewall-External-IF-IP: 172.16.1.100 Firewall-LAN-IF-IP: 192.168.1.1 VPN-Server-IP: 192.168.1.10 and below is my iptables file content: #Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *filter :INPUT ACCEPT [162000:140437619] :FORWARD ACCEPT [23282:27196133] :OUTPUT ACCEPT [185778:143961739] :LOGGING - [0:0] -A INPUT -p gre -j ACCEPT -A INPUT -s 192.168.1.10/32 -p tcp -m tcp --sport 1723 -j ACCEPT -A INPUT -s 192.168.1.10/32 -p udp -m udp --sport 1723 -j ACCEPT -A FORWARD -s 192.168.1.0/24 -o EXT_IF -j ACCEPT -A FORWARD -s 192.168.1.0/24 -i EXT_IF -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 192.168.1.10/32 -i EXT_IF -o INT_IF -p tcp -m tcp --dport 1723 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 192.168.1.10/32 -i INT_IF -o EXT_IF -p tcp -m tcp --sport 1723 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 192.168.1.10/32 -i EXT_IF -o INT_IF -p gre -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 192.168.1.10/32 -i INT_IF -o EXT_IF -p gre -m state --state RELATED,ESTABLISHED -j ACCEPT -A OUTPUT -p gre -j ACCEPT -A OUTPUT -d 192.168.1.10/32 -p tcp -m tcp --dport 1723 -j ACCEPT -A OUTPUT -d 192.168.1.10/32 -p udp -m udp --dport 1723 -j ACCEPT COMMIT # Completed on Thu May 29 12:40:18 2014 # Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *nat :PREROUTING ACCEPT [17865:1053739] :INPUT ACCEPT [5490:357281] :OUTPUT ACCEPT [3723:223677] :POSTROUTING ACCEPT [3726:223870] -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p tcp -m tcp --dport 1723 -j DNAT --to-destination 192.168.1.10 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p gre -j DNAT --to-destination 192.168.1.10 -A PREROUTING -i -h -A POSTROUTING -s 192.168.1.0/24 -o EXT_IF -j MASQUERADE COMMIT # Completed on Thu May 29 12:40:18 2014 # Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *mangle :PREROUTING ACCEPT [22695965:17811993005] :INPUT ACCEPT [13818180:11522330171] :PREROUTING ACCEPT [17865:1053739] :INPUT ACCEPT [5490:357281] :OUTPUT ACCEPT [3723:223677] :POSTROUTING ACCEPT [3726:223870] -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p tcp -m tcp --dport 1723 -j DNAT --to-destination 192.168.1.10 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p gre -j DNAT --to-destination 192.168.1.10 -A PREROUTING -i -h -A POSTROUTING -s 192.168.1.0/24 -o EXT_IF -j MASQUERADE COMMIT # Completed on Thu May 29 12:40:18 2014 # Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *mangle :PREROUTING ACCEPT [22695965:17811993005] :INPUT ACCEPT [13818180:11522330171] :FORWARD ACCEPT [8527694:6271564562] :OUTPUT ACCEPT [14748508:11899678536] :POSTROUTING ACCEPT [23271280:18170828012] COMMIT # Completed on Thu May 29 12:40:18 2014 hope that I find the solution here ....!! :(

    Read the article

  • Secure openVPN using IPTABLES

    - by bob franklin smith harriet
    Hey, I setup an openVPN server and it works ok. The next step is to secure it, I opted to use IPTABLES to only allow certain connections through but so far it is not working. I want to enable access to the network behind my openVPN server, and allow other services (web access), when iptables is disabaled or set to allow all this works fine, when using my following rules it does not. also note, I already configured openVPN itself to do what i want and it works fine, its only failing when iptables is started. Any help to tell me why this isnt working will appreciated here. These are the lines that I added in accordance with openVPN's recommendations, unfortunately testing these commands shows that they are requiered, they seem incredibly insecure though, any way to get around using them? # Allow TUN interface connections to OpenVPN server -A INPUT -i tun+ -j ACCEPT #allow TUN interface connections to be forwarded through other interfaces -A FORWARD -i tun+ -j ACCEPT # Allow TAP interface connections to OpenVPN server -A INPUT -i tap+ -j ACCEPT # Allow TAP interface connections to be forwarded through other interfaces -A FORWARD -i tap+ -j ACCEPT These are the new chains and commands i added to restrict access as much as possible unfortunately with these enabled, all that happens is the openVPN connection establishes fine, and then there is no access to the rest of the network behind the openVPN server note I am configuring the main iptables file and I am paranoid so all ports and ip addresses are altered, and -N etc appears before this so ignore that they dont appear. and i added some explanations of what i 'intended' these rules to do, so you dont waste time figuring out where i went wrong : 4 #accepts the vpn over port 1192 -A INPUT -p udp -m udp --dport 1192 -j ACCEPT -A INPUT -j INPUT-FIREWALL -A OUTPUT -j ACCEPT #packets that are to be forwarded from 10.10.1.0 network (all open vpn clients) to the internal network (192.168.5.0) jump to [sic]foward-firewall chain -A FORWARD -s 10.10.1.0/24 -d 192.168.5.0/24 -j FOWARD-FIREWALL #same as above, except for a different internal network -A FORWARD -s 10.10.1.0/24 -d 10.100.5.0/24 -j FOWARD-FIREWALL # reject any not from either of those two ranges -A FORWARD -j REJECT -A INPUT-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT-FIREWALL -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT-FIREWALL -j REJECT -A FOWARD-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT #80 443 and 53 are accepted -A FOWARD-FIREWALL -m tcp -p tcp --dport 80 -j ACCEPT -A FOWARD-FIREWALL -m tcp -p tcp --dport 443 -j ACCEPT #192.168.5.150 = openVPN sever -A FOWARD-FIREWALL -m tcp -p tcp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -m udp -p udp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -j REJECT COMMIT now I wait :D

    Read the article

  • Set HTTP condition for redirect rule

    - by Török Gábor
    A have a redirect rule in my .htaccess that forwards agent from A.html to B.html using the following pattern: Redirect 301 /A.html http://mysite.com/B.html Since the Redirect directive requires to set the target host, is it possible to let this rule prevail only on a specific host? I have both a test and deploy domain, and only want it on the deploy domain. I can set HTTP conditions for Rewrite rules, but how can I for HTTP Redirects?

    Read the article

  • How to retrieve virtual machines from a pool via API in oVirt (RHEV)

    - by FerCa
    In oVirt (Red Hat Enterprise Virtualization) you can create a Virtual Machines Pool to allow your users to retrieve virtual machines from this pool. I found how a user, in the RHEV User Portal, can request a Virtual Machine from the pool, this is explained here: https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Virtualization/3.0/html/Evaluation_Guide/Evaluation_Guide-Allocate_VM.html The thing is that i will need to retrieve virtual machines from the pool with the REST API and, after reading the documentation (https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Virtualization/3.0/html-single/REST_API_Guide/index.html) I cant found the way to do this.

    Read the article

  • Linux service --status-all shows "Firewall is stopped." what service does firewall refer to?

    - by codewaggle
    I have a development server with the lamp stack running CentOS: [Prompt]# cat /etc/redhat-release CentOS release 5.8 (Final) [Prompt]# cat /proc/version Linux version 2.6.18-308.16.1.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Oct 2 22:50:05 EDT 2012 [Prompt]# yum info iptables Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.anl.gov * extras: centos.mirrors.tds.net * rpmfusion-free-updates: mirror.us.leaseweb.net * rpmfusion-nonfree-updates: mirror.us.leaseweb.net * updates: mirror.steadfast.net Installed Packages Name : iptables Arch : x86_64 Version : 1.3.5 Release : 9.1.el5 Size : 661 k Repo : installed .... Snip.... When I run: service --status-all Part of the output looks like this: .... Snip.... httpd (pid xxxxx) is running... Firewall is stopped. Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) ....Snip.... iptables has been loaded to the kernel and is active as represented by the rules being displayed. Checking just the iptables returns the rules just like status all does: [Prompt]# service iptables status Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) .... Snip.... Starting or restarting iptables indicates that the iptables have been loaded to the kernel successfully: [Prompt]# service iptables restart Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_n[ OK ] [Prompt]# service iptables start Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_n[ OK ] I've googled "Firewall is stopped." and read a number of iptables guides as well as the RHEL documentation, but no luck. As far as I can tell, there isn't a "Firewall" service, so what is the line "Firewall is stopped." referring to?

    Read the article

  • iptables: Allow only HTTP access for web browsing

    - by user1448260
    Have a linux box, want it locked down but just be able to surf internet on it. Why is this script blocking http too? #!/bin/sh # # iptables -F # #Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP # # Allow TCP connections on tcp port 80 # iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # List rules # iptables -L -v

    Read the article

  • Run command automatically as root after login

    - by J V
    I'm using evrouter to simulate keypresses from my mouses extra buttons. It works great but I need to run the command with sudo to make it work so I can't just use my DE to handle autostart. I considered init.d but from what I've heard this only works for different stages of boot, and I need this to run as root after login. $ cat .evrouterrc "Logitech G500" "/dev/input/event4" any key/277 "XKey/0" "Logitech G500" "/dev/input/event4" any key/280 "XKey/9" "Logitech G500" "/dev/input/event4" any key/281 "XKey/8" $ sudo evrouter /dev/input/event4

    Read the article

  • Mod_rewrite delete parameter in 301 Redirect

    - by Jack
    Hi, How would I go about rewriting: http://www.example.com/foo.html?order=desc&limit=all&something=else to http://www.example.com/foo.html?order=desc&something=else I want to remove all instances on limit=all regardless of how many other parameters in the url. I have tried: RewriteCond %{QUERY_STRING} ^(.*&)&limit=all(&.*)?$ [NC] RewriteRule ^foo\.html$ /foo\.html\?%1%2 [R=301,L]

    Read the article

  • Rails: savage_beast forum plugin and tinymce - new post works but edit doesn't use tinymce properly

    - by Max Williams
    Hi all. I'm using the savage_beast forum plugin and tinymce (via the tinymce_hammer plugin) in my rails app. When posting a new post, tinymce works fine. However, when i go to edit a post i get the tinymce editor, but the content in the edit box has all been converted into html. Can anyone tell me how i get it so that what appears in the tinymce edit box is the original text i posted, rather than the converted-to-html version? Does it need to get converted back from html into a format tinymce will use? Savage_beast saves the original given text in a body field, and the converted-to-html text in a body_html field. After tinymce does its work in the first instance (ie when posting a new post) the body field gets text that's already been converted to html. So i guess i need to convert it back to whatever tinymce expects? I'd expect tinymce to be happy with getting html, and to just handle it, though. grateful for any advice - max

    Read the article

  • Google slideshow shows a blank screen when calling from ajax

    - by ufk
    I'm having problems implementing google slideshow (http://www.google.com/uds/solutions/slideshow/index.html) to my web application by loading it using a jquery load() function. index.html: <script type="text/javascript" src="jquery-1.3.2.js"></script> <div id="moshe"></div> <script type="text/javascript"> $(document).ready(function(){ $('#moshe').load('test.html'); }); </script> test.html: <script type="text/javascript"> function load() { var samples = "http://dlc0421.googlepages.com/gfss.rss"; var options = { displayTime: 2000, transistionTime: 600, linkTarget : google.feeds.LINK_TARGET_BLANK }; new GFslideShow(samples, "slideshow", options); } google.load("feeds", "1"); google.setOnLoadCallback(load); </script> <div id="slideshow" class="gslideshow" style="width:300px;height:300px;position:relative; border: 2px solid blue">Loading...</div> When i execute the test.html, it loads the slideshow just fine. when i try to load using index.html that actually calls Jquery's $.load() function that loads the content of test.html into a specific div element, i see that the gallery is loading on that div, but when it's about to show images the entire page clears and all i have is a blank page. Any ideas ? a different version of index.html without using jquery: <script type="text/javascript"> function makeRequest(url) { var httpRequest; if (window.XMLHttpRequest) { // Mozilla, Safari, ... httpRequest = new XMLHttpRequest(); if (httpRequest.overrideMimeType) { httpRequest.overrideMimeType('text/xml'); // See note below about this line } } else if (window.ActiveXObject) { // IE try { httpRequest = new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) { try { httpRequest = new ActiveXObject("Microsoft.XMLHTTP"); } catch (e) {} } } if (!httpRequest) { alert('Giving up :( Cannot create an XMLHTTP instance'); return false; } httpRequest.onreadystatechange = function() { alertContents(httpRequest); }; httpRequest.open('GET', url, true); httpRequest.send(''); } function alertContents(httpRequest) { if (httpRequest.readyState == 4) { if (httpRequest.status == 200) { document.getElementById('moshe').innerHTML=httpRequest.responseText; } else { alert('There was a problem with the request.'); } } } makeRequest('test.html'); </script>

    Read the article

  • Code Golf - p day

    - by gnibbler
    The Challenge The shortest code by character count to display a representation of a circle of radius R using the *character, followed by an approximation of p. Input is a single number, R. Since most computers seem to have almost 2:1 ratio you should only output lines where y is odd. The approximation of p is given by dividing twice the number of * characters by R². The approximation should be correct to at least 6 significant digits. Leading or trailing zeros are permitted, so for example any of 3, 3.000000, 003 is accepted for the inputs of 2 and 4. Code count includes input/output (i.e., full program). Test Cases Input 2 Output *** *** 3.0 Input 4 Output ***** ******* ******* ***** 3.0 Input 8 Output ******* ************* *************** *************** *************** *************** ************* ******* 3.125 Input 10 Output ********* *************** ***************** ******************* ******************* ******************* ******************* ***************** *************** ********* 3.16

    Read the article

  • Code Golf - PI day

    - by gnibbler
    The Challenge The shortest code by character count to display a representation of a circle of radius R using the *character. Followed by an approximation of pi Input is a single number, R Since most computers seem to have almost 2:1 ratio you should only output lines where y is odd. The approximation of pi is given by dividing the twice the number of * characters by R squared. The approximation should be correct to at least 6 significant digits. Leading or trailing zeros are permitted, so for example any of 3,3.000000,003 is accepted for the inputs of 2 and 4 Code count includes input/output (i.e full program). Test Cases Input 2 Output *** *** 3.0 Input 4 Output ***** ******* ******* ***** 3.0 Input 8 Output ******* ************* *************** *************** *************** *************** ************* ******* 3.125 Input 10 Output ********* *************** ***************** ******************* ******************* ******************* ******************* ***************** *************** ********* 3.16

    Read the article

  • Jquery flowplayer - tabs - content inside div tags not displaying

    - by Gublooo
    Hey guys, I'm looking for a simple example of JQuery tabs in which I am planning to show two different forms. I came across this example http://flowplayer.org/tools/demos/tabs/index.htm which is perfect for my needs. So I implemented the simple example. The code in question is: <div class="panes" <divFirst tab content. Tab contents are called "panes"</div <divSecond tab content</div <divThird tab content</div </div Now my content for the first tab is a form which has several of its own div tags - when I put that form with div tags as the content for the first tab - nothing appears. So I made a simple change and added another div tag to the content of the first tab as shown below and still nothing appears: <div class="panes" <div<divFirst tab content. Tab contents are called "panes"</div</div <divSecond tab content</div <divThird tab content</div </div Is there a simple way to fix this. This is the content that I want to display in my first tab - Thanks for your help <div id="formbox" class="formbox" <form id="shopping_form" method="post" <div id="3" style="width:520px;" <textarea id="message" name="message" rows="3" cols="50"</textarea </div <div id="store_row" style="width:220px;float:left;padding-bottom:10px;"<bStore</b <input type="text" id="store" name="store" class="required" size="20" / <input type="hidden" id="store_id"/ </div <div id="city_column" style="width:200px;float:left;padding-bottom:10px;"<bCity</b <input type="text" id="city" name="city" size="15"/ </div <div id="findbutton_column" style="vertical-align:top;width:80px;float:left;" <input class="find_address" id="findaddress" type="button" value="Find Store"/ </div <div id="googlerow" style="width:120px;float:left;padding-bottom:10px;" <bSelect Store</b<select id="google_stores" name="google_stores"</select <input type="hidden" id="google_address"/ </div <div id="google_message" style="float:left;padding-bottom:10px;display:none;"</div <div id="locationrow" style="float:left;padding-bottom:10px;display:none;" <bAddress/Country</b <input type="text" id="address" name="address" size="20" / <input type="text" id="country" name="country" size="20"/ </div <div style="width:520px;float:left;padding-bottom:10px;" <bPrice    <input type="text" id="price" name="price" size="20" / </div <div id="buttonrow" style="width:200px;float:right;display:none;" <input id="it" type="image" src="http://images.pe.com.s3.amazonaws.com/it.png" height="35px"/ </div </form </div

    Read the article

  • Preferred method to reload page with JavaScript?

    - by Mel
    Hey Guys, which way to reload a current page (using a button) would you prefer? <input type="button" value="Reload" onClick="history.go(0)"> <input type="button" value="Reload" onClick="location.reload(true)"> <input type="button" value="Reload" onClick="window.location.reload(true)"> <input type="button" value="Reload" onClick="window.location.href=window.location.href"> <input type="button" value="Reload" onClick="document.location.reload(true)"> <input type="button" value="Reload" onClick="document.location.href=document.location.href"> As the URL of the page changes frequently AFAIK a 'fallback function' like <a href="urlOfCurrentPage.html" onclick="window.location.reload(true);return false;">Reload</a> won't work for me, right?

    Read the article

  • jquery validate plugin: add a custom method

    - by pixeline
    I need some guidance on how to add a validation method to the jquery validate plugin. I've gathered that i need to use the plugin's addMethod() function, but how exactly to have it do what i need... Here i am! My form 's first question is a radio input choice. Each radio input, if selected, shows a sub-question of several checkboxes. What i would like my validation to do is: - make sure one radio input is selected - make sure at least one checkbox pertaining to the radio input is selected. Basically, out of the validate plugin's own logic, i would count the selector's length, and if there isn't any, return the error message. Something like this: var weekSelected = ($('input.seasonSelector:checked input.weekSelector:checked',form).length > 0); if(!weekSelected){ return 'Please select a week inside that season'; } How to turn that into a validate plugin method ?

    Read the article

  • jquery ajax, array and json

    - by sea_1987
    I am trying to log some input values into an array via jquery and then use those to run a method server side and get the data returned as JSON. The HTML looks like this, <div class="segment"> <div class="label"> <label>Choose region: </label> </div> <div class="column w190"> <div class="segment"> <div class="input"> <input type="checkbox" class="radio" value="Y" name="area[Nationwide]" id="inp_Nationwide"> </div> <div class="label "> <label for="inp_Nationwide">Nationwide</label> </div> <div class="s">&nbsp;</div> </div> </div> <div class="column w190"> <div class="segment"> <div class="input"> <input type="checkbox" class="radio" value="Y" name="area[Lancashire]" id="inp_Lancashire"> </div> <div class="label "> <label for="inp_Lancashire">Lancashire</label> </div> <div class="s">&nbsp;</div> </div> </div> <div class="column w190"> <div class="segment"> <div class="input"> <input type="checkbox" class="radio" value="Y" name="area[West_Yorkshire]" id="inp_West_Yorkshire"> </div> <div class="label "> <label for="inp_West_Yorkshire">West Yorkshire</label> </div> <div class="s">&nbsp;</div> </div> <div class="s">&nbsp;</div> </div> I have this javascript the detect whether the items are checked are not if($('input.radio:checked')){ } What I dont know is how to get the values of the input into an array so I can then send the information through AJAX to my controller. Can anyone help me?

    Read the article

  • Custom model in ASP.NET MVC controller: Custom display message for Date DataType

    - by Rita
    Hi I have an ASP.NET MVC Page that i have to display the fields in customized Text. For that I have built a CustomModel RequestViewModel with the following fields. Description, Event, UsageDate Corresponding to these my custom Model has the below code. So that, the DisplayName is displayed on the ASP.NET MVC View page. Now being the Description and Event string Datatype, both these fields are displaying Custom DisplayMessage. But I have problem with Date Datatype. Instead of "Date of Use of Slides", it is still displaying UsageDate from the actualModel. Anybody faced this issue with DateDatatype? Appreciate your responses. Custom Model: [Required(ErrorMessage="Please provide a description")] [DisplayName("Detail Description")] [StringLength(250, ErrorMessage = "Description cannot exceed 250 chars")] // also need min length 30 public string Description { get; set; } [Required(ErrorMessage="Please specify the name or location")] [DisplayName("Name/Location of the Event")] [StringLength(250, ErrorMessage = "Name/Location cannot exceed 250 chars")] public string Event { get; set; } [Required(ErrorMessage="Please specify a date", ErrorMessageResourceType = typeof(DateTime))] [DisplayName("Date of Use of Slides")] [DataType(DataType.Date)] public string UsageDate { get; set; } ViewCode: <p> <%= Html.LabelFor(model => model.Description) %> <%= Html.TextBoxFor(model => model.Description) %> <%= Html.ValidationMessageFor(model => model.Description) %> </p> <p> <%= Html.LabelFor(model => model.Event) %> <%= Html.TextBoxFor(model => model.Event) %> <%= Html.ValidationMessageFor(model => model.Event) %> </p> <p> <%= Html.LabelFor(model => model.UsageDate) %> <%= Html.TextBoxFor(model => model.UsageDate) %> <%= Html.ValidationMessageFor(model => model.UsageDate) %> </p>

    Read the article

  • Correct way to edit and update complex viewmodel objects using asp.net-mvc2 and entity framework

    - by jslatts
    I have a table in my database with a one to many relationship to another table: ParentObject ID Name Description ChildObject ID Name Description ParentObjectID AnotherObjectID The objects are mapped into Entity Framework and exposed through a data access class. It seemed like ViewModels are recommended when the data to be displayed greatly differs from the domain object, so I created a ViewModel as follows: public class ViewModel { public IList<ParentObject> ParentObjects { get; set; } public ParentObject selectedObject { get; set; } public IList<ChildObject> ChildObjects { get; set; } } I have a view that displays a list of ParentObjects and when clicked will allow a ChildObject to be modified saved. <% using (Html.BeginForm()) { %> <table> <% foreach (var parent in Model.ParentObjects) { %> <tr> <td> ObjectID [<%= Html.Encode(parent.ID)%>] </td> <td> <%= Html.Encode(parent.Name)%> </td> <td> <%= Html.Encode(parent.Description)%> </td> </tr> <% } %> </table> <% if (Model.ParentObject != null) { %> <div> Name:<br /> <%= Html.TextBoxFor(model => model.ParentObject.Name) %> <%= Html.ValidationMessageFor(model => model.ParentObject.Name, "*")%> </div> <div> Description:<br /> <%= Html.TextBoxFor(model => model.ParentObject.Description) %> <%= Html.ValidationMessageFor(model => model.ParentObject.Description, "*")%> </div> <div> Child Objects </div> <% for (int i = 0; i < Model.ParentObject.ChildObjects.Count(); i++) { %> <div> <%= Html.DisplayTextFor(sd => sd.ChildObjects[i].Name) %> </div> <div> <%= Html.HiddenFor(sd => sd.ChildObjects[i].ID )%> <%= Html.TextBoxFor( sd => sd.ChildObjects[i].Description) %> <%= Html.ValidationMessageFor(sd => sd.ChildObjects[i].Description, "*") %> </div> <% } } } %> This all works fine. My question is around the best way to update the EF objects and persist the changes back to the database. I initially tried: [HttpPost] public ActionResult Edit(ViewModel viewModel) { ParentObject parent = myRepository.GetParentObjectByID(viewModel.SelectedObject.ID); if ((!ModelState.IsValid) || !TryUpdateModel(parent, "SelectedObject", new[] { "Name", "Description" })) { || !TryUpdateModel(parent.ChildObjects, "ChildObjects", new[] { "Name", "Description" })) { //Code to handle failure and return the current model snipped return View(viewModel); } myRepository.Save(); return RedirectToAction("Edit"); } When I try to save a change to the child object, I get this exception: Entities in 'MyEntities.ChildObject' participate in the 'FK_ChildObject_AnotherObject' relationship. 0 related 'AnotherObject' were found. 1 'AnotherObject' is expected. Investigation on StackOverflow and generally googling led me to this blog post that seems to describe my problem: TryUpdateModel() does not correctly handle nested collections. Apparently, (and stepping through the debugger confirms this) it creates a new ChildObject instead of associating with the EF objects from my instantiated context. My hacky work around is this: if (viewModel.ChildObjects.Count > 0) { foreach (ChildObject modelChildObject in viewModel.ChildObjects) { ChildObject childToUpdate = ParentObject.ChildObject.Where(a => a.ID == modelChildObject.ID).First(); childToUpdate.Name = modelChildObject.Name; } } This seems to work fine. My question to you good folks: Is there correct way to do this? I tried following the suggestion for making a custom model binder per the blog link I posted above but it didn't work (there was an issue with reflection) and I needed to get something going ASAP. PS - I tried to cleanup the code to hide specific information, so beware I may have hosed something up. I mainly just want to know if other people have solved this problem. Thanks!

    Read the article

  • How do I test SendInput in c#

    - by JoelHess
    How can I tell if my call to SendInput is working properly? I have a small snippet below, and the message never seems to get hit. SendInput() returns 1, and there's no errors, so I assume that the message is going out properly. I've also tried the Form KeyPress and KeyDown Events, and I never seem to get those either. private void button1_Click(object sender, EventArgs e) { INPUT input = new INPUT(); input.mkhi.ki.wVk = (byte)System.Windows.Forms.Keys.B; uint result = SendInput(1, ref input, Marshal.SizeOf(new INPUT())); } protected override void WndProc(ref Message m) { if (m.Msg == WM_KEYDOWN) { Console.WriteLine("GotIt"); } base.WndProc(ref m); }

    Read the article

  • php random array

    - by user295189
    I am trying to get a random array like this srand((float) microtime() * 10000000); $input = array("Neo", "Morpheus", "Trinity", "Cypher", "Tank"); $rand_keys = array_rand($input, 2); echo $input[$rand_keys[0]] . "\n"; echo $input[$rand_keys[1]] . "\n"; it shows 2 numbers randomly if I have $rand_keys = array_rand($input, 2);$rand_keys = array_rand($input, 5); but since I want all 5 to show it doesnt work. whats causing that. I need to use array_rand. thanks

    Read the article

< Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >