Search Results

Search found 19788 results on 792 pages for 'remote host'.

Page 494/792 | < Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >

• Printing to shared printers across VPN

  - by CYMR0

  I have a program that prints labels at five remote sites. Two sites, aren't working, but the rest are with an identical (as far as I can tell) setup. Using Wireshark, I have determined that the handshaking all goes well, but after the "Open Print File Response" the packet that is sent from the server, doesn't reach the client. But I'm a bit at a loss as to where I go from here. I know the port the packet was sent on (445) isn't being blocked, the RST packet gets sent on the same port and that gets there fine. It's also weird that the three out of five sites are working fine. This has been up and running for years without issue, all that we have changed is our connectivity (from DSL to bonded DSL). But this traffic is over a VPN - so it can't be the ISP interfering either can it? I'm totally stuck, and any help would be much appreciated. Thanks!

  Read the article

• How to configure Windows 2008 R2 server for LAN and wireless internet connections

  - by Alchemical

  For special testing purposes, we need a Windows server to allow the following: A team member can log in remotely to the server. When remotely logged in, they can disconnect the wireless connection, perform a few tests, and then reconnect the wireless connection. In general, the LAN connection would just be used for the remote login, the wireless connection would be used for performing tests including using a web browser to test certain web sites, etc. How can we successfully configure the server to support 2 network connections like this? (A regular LAN connection + a wireless connection). And also make sure that the tests we perform using the browser utilize the wireless connection for the outgoing internet activity.

  Read the article

• Meta key in Terminal.app vs national characters

  - by yacoob

  I'm using Terminal.app, and I'd like to use emacs running inside - either locally, or after sshing to remote server. Problem is, I can't get working Meta modifier. Namely, if I enable 'Use option as meta key', Option key works like proper Meta, but I lose ability to enter Polish diacritics (aelósznzc), that are entered with right Option. If I disable 'Use option as meta key', my Meta is gone, but I can again use Polish characters. In this state they appear only with right Option modifier, so I guess it's Terminal.app's fault that it doesn't make a difference between left and right Option key, when the relevant preference is selected. What are my options then? Is there a good solution for my problem? I can always use ESC as a poor man's Meta replacement, but I don't like that idea.

  Read the article

• How to block own rpcap traffic where tshark is running?

  - by Pankaj Goyal

  Platform :- Fedora 13 32-bit machine RemoteMachine$ ./rpcapd -n ClientMachine$ tshark -w "filename" -i "any interface name" As soon as capture starts without any capture filter, thousands of packets get captured. Rpcapd binds to 2002 port by default and while establishing the connection it sends a randomly chosen port number to the client for further communication. Both client and server machines exchange tcp packets through randomly chosen ports. So, I cannot even specify the capture filter to block this rpcap related tcp traffic. Wireshark & tshark for Windows have an option "Do not capture own Rpcap Traffic" in Remote Settings in Edit Interface Dialog box. But there is no such option in tshark for linux. It will be also better if anyone can tell me how wireshark blocks rpcap traffic....

  Read the article

• Determining Performance Limits

  - by JeffV

  I have a number of windows processes that pass messages between them hat a high rate using tcp to local host. Aside from testing on actual hardware how can I assess what my hardware limit will be. These applications are not doing CPU intensive work, mostly decomposing and combining messages, scanning over them for special flag in the data etc.. The message size is typically 3k and the rate is typically ~10k messages per second. ~30MB per second between processing stages. There may be 10 or more stages depending. For this type of application, what should I look to for assessing performance? What do I look for in a server performance wise? I am currently running an XEON L5408 with 32 GB ram. But I am assuming cache is more important than actual ram size as I am barely touching the ram.

  Read the article

• "Request not supported" in IPCONFIG (WinXP SP3)

  - by pablog

  In a customer PC (Windows XP SP3), suddenly the network went down: the network adapter appears with an error mark. I replaced the network card, but the new one does the same thing. When I enter IPCONFIG, XP shows this error (in standard and safe mode): Internal error occurred Request not supported Unable to query host name If I start the system with a boot cd the PC runs fine, so the problem seems to be in the XP installation. I tried: uninstalling and reinstalling the network card in the Device Manager disabling and reenabling the card netsh int ip reset netsh winsock reset catalog and a couple of "reset" programs (WinsockxpFix.exe, etc) with no luck. Is there any way to fix it without reinstalling XP? TIA, Pablo

  Read the article

• How to assign a keyboard shortcut to a specific New Window template in Terminal.app?

  - by Mike

  I have a template set up in Snow Leopard's Terminal.app to create a new window or tab with my preferred emulation settings for a particular host that I use. I'd like to assign a keyboard shortcut to that template so that I can quickly create a new window with those settings. I tried using the Keyboard Shortcuts System Preference pane to do it. I can assign the shortcut key to the MyTemplate submenu, but it doesn't work when I try to use it. I suspect because the MyTemplate is listed in multiple submenus -- one for New Window and one for New Tab. How can I assign a keyboard shortcut to my new fancy template? PS. I do NOT wish to change my default (cmd-N) template.

  Read the article

• Trouble subnetting...

  - by ???

  I have to learn how to subnet by hand for a test. And I'm having real problems doing it. I keep getting stuck. Here's an example: 138.248.184.17/18 - IP 255.255.192.0 - Subnet Mask 192 = 1100 0000 in binary And I know 184 in the IP address is the "octet of interest". OK I get that far...and then I'm lost. I know I need to set the network bits of 192(I think?) to all 0 for the network ID and then to all 1 for the broadcast ID. Problem is how do I know which part of 11000000 is network and which part is host?

  Read the article

• Apache server-status when running as proxy server

  - by f-z-N

  We are running apache as a proxy server and have tomcat behind apache. We are using server_status module but when we try to access server_status as in https://host.com/server-status it redirects to tomcat and we get 404 error. I am quite new to this, tried going through apache docs but unable to figure out the solution. Fyi.We have ssl enabled Current ssl.conf settings: ProxyRequests Off ProxyPreserveHost On <Proxy http://localhost:8081/*> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8081/ ProxyPassReverse / http://localhost:8081/ ProxyPassReverse / http://myhost:8081/ <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from 10.90 </Location>

  Read the article

• Configuration of Sonicwall Load Balancing

  - by jacke672

  We installed a Sonicwall NSA 240 appliance and have configured it up for our SSL VPN connection and for load balancing with 2 ADSL lines. Over the past week, I have been testing the load balancing options to optimize the connection speeds for our users - but I've run into the following: Round Robin load balancing is the ideal load balancing setting and it's roughly doubling our throughput- but, when it's active users are unable to access any SSL enabled websites such as banking, web-mail, etc. For this reason, I have been using percentage based balancing as it allows me to enable source and destination IP binding, which doesn't 'break' any secure connections but were left with the slow connection speeds we had before adding the second line. I'm looking for a method in which we can take advantage of the round robin connection speeds while allowing users to access sites with SSL certificates, all while still allowing our remote (vpn) users to connect. Any help would be appreciated. Thanks

  Read the article

• apache2 mod_proxy without 301 moved permanently?

  - by Guy Sensei

  Is it possible to not send a 301 moved permanently response to the client when using mod_proxy? I would like the client to deal with the reverse proxy as opaquely as possible. My Virtual Host Settings- relevant snippet ProxyPreserveHost On ProxyPass /GTM http://192.168.1.27/GTM ProxyPassReverse /GTM http://192.168.1.27/GTM wget localhost/GTM --2011-09-27 21:54:22-- localhost/GTM Resolving localhost... ::1, 127.0.0.1 Connecting to localhost|::1|:80... failed: Connection refused. Connecting to localhost|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: localhost/GTM/ [following] --2011-09-27 21:54:22-- localhost/GTM/ Reusing existing connection to localhost:80. HTTP request sent, awaiting response... 200 OK

  Read the article

• SSL FTP fails on Windows 7 but not Windows XP clients

  - by Andrew Neely

  We currently use a free SSL-FTP client called Move-It-Freely to transmit data from a custom data entry program at over forty facilities scattered around the state to our central server. Under XP, it works flawlessly. Some facilities have upgraded to Windows 7. On these machines, uploads (transfers to us) work, downloads (transfers from us to them) fail. Replacing the Windows 7 machine with an XP machine solves the problem. We have also verified that the network firewall settings have not changed. This problem persists even if Windows firewall is not running. We were able to remote into one of the Windows 7 machines to verify that the Windows firewall was indeed turned off. We cannot replicate the problem on our own Windows 7 machines, and are at a loss of how to fix this feature for our customers. The data contain health-related information, and needs to be encrypted (hence SSL-FTP.) Despite hours spent on Google, we cannot find a solution.

  Read the article

• URL redirect to a virtual server on a VLAN

  - by zeroFiG

  I have a production site, running off 10 servers. I've been given another virtual server on the same network as these 10 servers, to use for testing purposes. This server doesn't have it's own DNS entry. Therefore I need to do a redirect to the site hosted on this virtual server for a sub-domain of the site running on the 10 other servers. So Basically I was wondering how I would configure a sub domain of my production server to point at the Virtual server for testing. I'm guessing I need to modify my site file in /etc/apache2/sites-available and add another virtual host like the following and modify the redirect match: <VirtualHost *> ServerName SUBDOMAIN.DOMAIN.com RedirectMatch 301 (.*) **IP ADDRESS** CustomLog /var/log/apache2/SUBDOMAIN.DOMAIN.com.access.log combined </VirtualHost> Do I set the redirect match to just the IP on the Virtual server, and then configure another site file in the sites-available directory, which will recption this redirect and point the browser towards the HTML root? Thanks, I hope I made myself clear.

  Read the article

• Possible to use LVM partitions inside a vmbuilder created KVM virtual machine?

  - by Tauren

  I have an Ubuntu 9.10 host system with LVM partitions running KVM. I've been creating VMs using vmbuilder using LVM partitions for each VM instead of files for the VMs. When I configure a VM using vmbuilder --part, the partitions in the file I'm using are created as regular partitions (sda1, sda2, etc.). What I'd like to do is use LVM inside of the VM in case I need to resize the partitions at some point. But I don't see any options for doing that using the vmbuilder tool. It seems like this might be a common request to avoid using kpartx, etc. Is there something I'm missing, or is this just not possible with vmbuilder?

  Read the article

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• VPN and Bonjour conflicting

  - by JW.

  Does anyone know why a VPN connection might interfere with Apple's Bonjour? I've noticed that my Mac and various iDevices have trouble finding each other on my local network, when I have VPN connections open. Things like Home Sharing and Wi-Fi Sync work some of the time, but sometimes fail to find the other device. The VPN connections are made using IPSecuritas, which is a GUI around raccoon. I have the local "endpoint mode" set to Host. Apple mentions that Home Sharing may conflict with VPNs, but they don't specify why, or how to fix it. I'm using a Mac with OS 10.7.3 and IPSecuritas to connect to the VPN, an iPhone, and an iPad.

  Read the article

• Using mod_wsgi with mpm_itk: socket permission issue

  - by djechelon

  I'm using mod_itk as MPM for increased security in shared environment. I also have a Firefox Sync Server within one of the VHosts I host. That vhost is restricted to a certain user via AssignUserId user group. The problem is that the socket /var/run/wsgi...whatever.sock is chmodded srwx------ and owned by Apache's wwwrun. While I configured the vhost with WSGIProcessGroup sync WSGIDaemonProcess sync user=djechelon group=djechelon processes=1 threads=5 I still get the error that Apache wants to access a socket that is not accessible and because of this gets an error. Is it possible to configure mod_wsgi in order to create different sockets with different owners for different applications or to chmod its socket in a different way (less secure)? Currently, I'm running Firefox Sync as the only WSGI application. Moving it to a vhost that doesn't AssignUserId could solve this problem but will force me to change URL (and buy an additional SSL certificate), so I wouldn't consider this

  Read the article

• How to avoid maximum Workgroup Manager connections in Mac OS X Server 10.6

  - by Stephan

  Is there a limit on the Mac OS X Server (10.6) Workgroup Manager in respect to concurrent connections to a server? I have an OS X server up and running and Open Directory configured but I am not able to log in remotely as I get the message the maximum number of connections for Workgroup Manager is already reached and I should wait for a user to disconnect. Even after a restart I get this message remotely. However, locally on the server I can start Workgroup Manager without any issues. It always lets me connect. Any advice what I need to do to make Workgroup Manager work from a remote location? I could not find any max connection setting in Server-Admin and nothing in the slapd log files. The server license says unlimited so I am quite sure it should not be a regular error message that indicates to me I should upgrade.

  Read the article

• Does kern.hz still have any relevance in FreeBSD if "dynamic tick mode" is enabled?

  - by Frerich Raabe

  I'm running a FreeBSD 9.0 setup as a virtual machine in a KVM setup. In previous versions of FreeBSD it was common to force the kern.hz setting to a lower value so that the virtual machine does not keep the host busy because it's handling timer interrupts without having any work to do - the FreeBSD Handbook explains: The most important step is to reduce the kern.hz tunable to reduce the CPU utilization of FreeBSD under the Parallels environment. This is accomplished by adding the following line to /boot/loader.conf: kern.hz=100 Without this setting, an idle FreeBSD Parallels guest OS will use roughly 15% of the CPU of a single processor iMac®. After this change the usage will be closer to a mere 5%. However, in FreeBSD 9, the "dynamic tick mode" (aka "tickless mode") is the default, controlled by the kern.eventtimer.periodic setting which defaults to 0 (read: tickless mode). This makes me wonder - does the tip of lowering kern.hz still have any relevance for making FreeBSD 9 play nicely in a virtual machine setup?

  Read the article

• Cutting users off in Windows console sessions

  - by RoRy

  I'm currently working in a company where many of us log onto hosts/servers under Windows Server 2008 via console session. If one person is logged on and another tries it causes the person who was logged on first (and maybe doing something important) to be cut off. Is there such a thing as an application for such events where before logging on people can see if any other IP address is controlling the host/server? Also, if the person on the console session had the ability to leave a note for anybody thinking of taking over the session of when they are finished etc.. I have many other ideas for such things but could someone tell me if such an application exists?

  Read the article

• I need a few minutes of dedicated server a week, but not for hosting, just to convert ogg etc.

  - by talkingnews

  I'm completely happy with my webhosting, it's just that I need to do one little thing they won't allow, and that's run an instance of Sox to convert about 30 mp3s to ogg files, in various directories, a couple of times a week, to be done automatically in response to the detection of the upload of an mp3. Probably looking at a minute of server time over the whole week. I've had unhelpful suggestions on other forums like "why not leave your home PC on 24 hours a day and then use all your isp bandwidth to do this", which doesn't work for me. I know that I can host files on, say, Amazon S3, but is there something similar for my needs? All it would need to do would be: wget/ftp the mp3 files, convert them to ogg, ftp the files back to my hosting. Of course, all this wouldn't be needed if there was such a thing as a compiled binary of Sox (or any mp3ogg converter) for Centos which I could upload without needing root access, but I've given up asking that one, but always open to suggestions!

  Read the article

• How to configure fastcgi with lighttpd

  - by silverburgh

  Hi, I am trying to configure FastCgi with ligttpd server. I was able to run vanilla lighttpd like this: ./lighttpd -f lighttpd.conf And then I compile/install the source of fastcgi, and I add the following in my lighttpd.conf: fastcgi.server = ( "/fastcgi_scripts/" => (( #"host" => "127.0.0.1", #"port" => 9091, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", "docroot" => "/" # remote server may use # it's own docroot )) ) But lighttpd won't start after I add the above. Can you please tell me how can I run fastcgi with lighttpd? I want to use a c program with fastcgi with lighttpd. Thank you.

  Read the article

• Mac OS X Snow Leopard: permissions changed on /var results in dns lookup issues

  - by Ivan

  I was attempting to solve an issue ("/var/log/msmtp.log: permissions denied" error when attempting to send mail using msmtp) when I did this: > chmod -R 770 /var After that, my machine would not resolve domain names via cURL. (ping also fails) But, oddly, I can enter domain names into Safari and visit any web pages w/o a problem... I'm actually not sure if the chmod command is the cause of the problem, but I suspect it is. Also, if I ls -l on /var (or /private/var) it doesn't seem that any of the subdirectories or files there actually changed permission, but there are many, so I can't say that conclusively... Incidentally, I fixed the original error (msmtp.log permission denied) by setting TMPDIR=/tmp in my local environment (bash). Now the error goes away, but I get this error: msmtp: cannot locate host domainname.org: nodename nor servname provided, or not known Any ideas about how to go about getting DNS working again?

  Read the article

• Resolve Wrong IP from Domain Name only on certain networks

  - by Godric Seer

  I host a personal website on an old desktop that is LAMP based. There are several strange things about this problem so I will break it down into steps. Since I have a dynamic IP, I use no-ip to make sure I have a working domain name at all times. I use the automatic update client, but logged in and checked and my no-ip domain has the proper IP tied to it. Here is a link to the homepage through the no-ip domain for reference. Also, I do a ping and a traceroute on the no-ip domain and get: [eckertzs@localhost ~]$ ping -c 1 endradil.noip.me PING endradil.noip.me (65.24.215.99) 56(84) bytes of data. 64 bytes from endradil.noip.me (65.24.215.99): icmp_seq=1 ttl=64 time=2.23 ms --- endradil.noip.me ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 104ms rtt min/avg/max/mdev = 2.233/2.233/2.233/0.000 ms [eckertzs@localhost ~]$ traceroute endradil.noip.me traceroute to endradil.noip.me (65.24.215.99), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.755 ms 5.409 ms 5.380 ms 2 endradil.noip.me (65.24.215.99) 6.297 ms 9.543 ms 10.324 ms Using this domain, I can connect to my webserver without issue or interruption(the https is required to avoid a redirect serverside, but it works). I also have a domain I have bought on GoDaddy where I have a CNAME record forwarding the www subdomain to my no-ip domain. CNAME Record Host: www Points to: endradil.noip.me TTL: 1 hour For the past several weeks, I never had an issue using the GoDaddy domain to connect (ssh or https). As of the past few days, however, the GoDaddy domain has only worked intermittently, for a few minutes at a time and then will go down for hours at a time. I get server not found errors most of the time. Also, if I happen to be using the GoDaddy domain for an ssh connection, the connection will freeze. I have run online tests of the DNS and have seen that the website is visible by external servers and resolved to the correct IP. I also contacted GoDaddy support but they had no issues connecting to the website, and therefore did not see any issues. My personal computers (Windows desktop, linux laptop, android phone) all fail to connect when on my personal wifi. If I disconnect my phone from the wifi and use my AT&T wireless data, it can connect with both domains without issue. When I attempt to use Google webmaster tools to crawl the site using the GoDaddy domain, Google can not find the site. From my linux laptop, I have found some interesting results when I ping or traceroute the domain. The results from these: [eckertzs@localhost ~]$ ping -c 1 www.endradil.com PING www.endradil.com.Belkin (198.105.244.228) 56(84) bytes of data. --- www.endradil.com.Belkin ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 10000ms [eckertzs@localhost ~]$ traceroute www.endradil.com traceroute to www.endradil.com (198.105.244.228), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.918 ms 2.806 ms 2.772 ms 2 cpe-65-24-208-1.insight.res.rr.com (65.24.208.1) 29.247 ms 29.654 ms 30.094 ms 3 cpe-69-23-24-117.new.res.rr.com (69.23.24.117) 15.597 ms 23.218 ms 23.581 ms 4 agg24.clmcohib01r.midwest.rr.com (65.29.1.52) 30.581 ms 30.556 ms 31.192 ms 5 be27.clevohek01r.midwest.rr.com (65.29.1.38) 30.580 ms 31.062 ms 31.038 ms 6 bu-ether25.atlngamq47w-bcr01.tbone.rr.com (107.14.19.38) 37.863 ms 68.844 ms 43.773 ms 7 107.14.17.178 (107.14.17.178) 51.866 ms 51.019 ms 50.989 ms 8 ae0.pr1.dca10.tbone.rr.com (107.14.17.200) 48.467 ms ae-4-0.a0.lax91.tbone.rr.com (66.109.1.113) 49.912 ms * 9 v413.core1.ash1.he.net (209.51.175.33) 60.270 ms 50.842 ms 50.819 ms 10 100ge5-1.core1.nyc4.he.net (184.105.223.166) 55.597 ms 56.045 ms 56.020 ms 11 xerocole-inc.10gigabitethernet12-4.core1.nyc4.he.net (216.66.41.242) 56.001 ms 55.969 ms 55.992 ms 12 * * * both show the incorrect IP. Also, the traceroute timesout on hops 12 through 255 (output truncated above). The traceroute using site24x7 works and shows reasonable results when run from their california server. From another linux box on a different network but in the same city as me (10 miles away), I still get timeout for traceroute, however the IP resolves correctly for the domain. From this I believe that the DNS result is incorrectly cached in either my router/modem or perhaps even at my ISP level. My question is, first, how do I find out exactly what is wrong, and second, how do I resolve it.

  Read the article

• OS X 10.7.5 - telnet: connect to address 10.0.0.12: Operation not permitted

  - by user2169619

  I have troubles to connect from macos to reach windows shares and I hit some general problem with my macos. When I try to telnet to 445 port to my windows share server the macos throws "Operation not permitted". I have no firewall rule and I'm not able to google anything. sh-3.2# telnet 10.0.0.12 445 Trying 10.0.0.12... telnet: connect to address 10.0.0.12: Operation not permitted telnet: Unable to connect to remote host Any idea what can be the reason?

  Read the article

< Previous Page | 490 491 492 493 494 495 496 497 498 499 500 501  | Next Page >