Search Results

Search found 29930 results on 1198 pages for 'email client'.

Page 495/1198 | < Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >

• Recruiters intentionally present one good candidate for an available job

  - by Jeff O

  Maybe they do it without realizing. The recruiter's goal is to fill the job as soon as possible. I even think they feel it is in their best interest that the candidate be qualified, so I'm not trying to knock recruiters. Aren't they better off presenting 3 candidates, but one clearly stands out? The last thing they want from their client is a need to extend the interview process because they can't decide. If the client doesn't like any of them, you just bring on your next good candidate. This way they hedge their bet a little. Any experience, insight or ever heard of a head-hunter admit this? Does it make sense? There has to be a reason why the choose such unqualified people. I've seen jobs posted that clearly state they want someone with a CS degree and the recruiter doesn't take it literally. I don't have a CS degree or Java experience and still they think I'm a possible fit.

  Read the article

• Slow boot on Ubuntu 12.04, probable cause the network connection

  - by Ravi S Ghosh

  I have been having rather slow boot on Ubuntu 12.04. Lately, I tried to figure out the reason and it seems to be the network connection which does not get connected and requires multiple attempts. Here is part of dmesg [ 2.174349] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.174352] EXT4-fs (sda2): write access will be enabled during recovery [ 2.308172] firewire_core: created device fw0: GUID 384fc00005198d58, S400 [ 2.333457] usb 7-1.2: new low-speed USB device number 3 using uhci_hcd [ 2.465896] EXT4-fs (sda2): recovery complete [ 2.466406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.589440] usb 7-1.3: new low-speed USB device number 4 using uhci_hcd **[ 18.292029] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 18.458958] udevd[377]: starting version 175 [ 18.639482] Adding 4200960k swap on /dev/sda5. Priority:-1 extents:1 across:4200960k [ 19.314127] wmi: Mapper loaded [ 19.426602] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.426739] r592: driver successfully loaded [ 19.460105] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 19.493629] lp: driver loaded but no devices found [ 19.497012] cfg80211: Calling CRDA to update world regulatory domain [ 19.535523] ACPI Warning: _BQC returned an invalid level (20110623/video-480) [ 19.539457] acpi device:03: registered as cooling_device2 [ 19.539520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.539568] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 19.578060] Linux video capture interface: v2.00 [ 19.667708] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.763171] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.763258] r852: driver loaded successfully [ 19.854769] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.0/input/input7 [ 19.854864] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input0 [ 19.878605] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.1/input/input8 [ 19.878698] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input1 [ 19.902779] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.3/7-1.3:1.0/input/input9 [ 19.925034] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.1-1.3/input0 [ 19.925057] usbcore: registered new interface driver usbhid [ 19.925059] usbhid: USB HID core driver [ 19.942362] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea) [ 19.947004] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 19.947075] usbcore: registered new interface driver uvcvideo [ 19.947077] USB Video Class driver (1.1.1) [ 20.145232] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.145235] Copyright(c) 2003-2011 Intel Corporation [ 20.145327] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.145357] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 20.145402] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 20.145404] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000 [ 20.145407] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 20.145531] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X [ 20.145613] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.145720] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 20.167535] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.167538] iwlwifi 0000:04:00.0: Device SKU: 0Xf0 [ 20.167567] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.172779] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.172783] Disabling lock debugging due to kernel taint [ 20.250115] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes. [ 20.250567] [fglrx] vendor: 1002 device: 9553 count: 1 [ 20.251256] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 20.251271] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.251277] pci 0000:01:00.0: setting latency timer to 64 [ 20.251559] [fglrx] Kernel PAT support is enabled [ 20.251578] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 20.310385] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 [ 20.310598] Registered led device: phy0-led [ 20.310628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.372306] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.411015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 20.454232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 20.545636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.545640] cfg80211: World regulatory domain updated: [ 20.545642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.545644] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.609484] type=1400 audit(1340502633.160:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=693 comm="apparmor_parser" [ 20.609494] type=1400 audit(1340502633.160:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 20.609843] type=1400 audit(1340502633.160:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser" [ 20.609852] type=1400 audit(1340502633.160:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 20.610047] type=1400 audit(1340502633.160:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser" [ 20.610060] type=1400 audit(1340502633.160:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 20.610476] type=1400 audit(1340502633.160:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser" [ 20.610829] type=1400 audit(1340502633.160:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser" [ 20.611035] type=1400 audit(1340502633.160:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser" [ 20.661912] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.661982] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 20.662013] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.770289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.770689] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.770786] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 20.770815] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 20.994040] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.994189] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 21.554799] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 21.554802] vesafb: scrolling: redraw [ 21.554804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 21.557342] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3072k, total 3072k [ 21.557498] Console: switching to colour frame buffer device 128x48 [ 21.557516] fb0: VESA VGA frame buffer device [ 21.987338] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 22.184693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 27.362440] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio. [ 27.436988] init: failsafe main process (986) killed by TERM signal [ 27.970112] ppdev: user-space parallel port driver [ 28.198917] Bluetooth: Core ver 2.16 [ 28.198935] NET: Registered protocol family 31 [ 28.198937] Bluetooth: HCI device and connection manager initialized [ 28.198940] Bluetooth: HCI socket layer initialized [ 28.198941] Bluetooth: L2CAP socket layer initialized [ 28.198947] Bluetooth: SCO socket layer initialized [ 28.226135] Bluetooth: RFCOMM TTY layer initialized [ 28.226141] Bluetooth: RFCOMM socket layer initialized [ 28.226143] Bluetooth: RFCOMM ver 1.11 [ 28.445620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.445623] Bluetooth: BNEP filters: protocol multicast [ 28.524578] type=1400 audit(1340502641.076:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser" [ 28.525018] type=1400 audit(1340502641.076:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser" [ 28.629957] type=1400 audit(1340502641.180:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser" [ 28.630325] type=1400 audit(1340502641.180:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1105 comm="apparmor_parser" [ 28.630535] type=1400 audit(1340502641.180:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1105 comm="apparmor_parser" [ 28.645266] type=1400 audit(1340502641.196:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1104 comm="apparmor_parser" **[ 28.751922] ADDRCONF(NETDEV_UP): wlan0: link is not ready** [ 28.753653] tg3 0000:08:00.0: irq 49 for MSI/MSI-X **[ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.857034] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 28.871080] type=1400 audit(1340502641.420:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1108 comm="apparmor_parser" [ 28.871519] type=1400 audit(1340502641.420:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1108 comm="apparmor_parser" [ 28.874905] type=1400 audit(1340502641.424:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1113 comm="apparmor_parser" [ 28.875354] type=1400 audit(1340502641.424:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1113 comm="apparmor_parser" [ 30.477976] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 30.477979] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX **[ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready** [ 31.110269] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 31.110859] [fglrx] Firegl kernel thread PID: 1327 [ 31.111021] [fglrx] Firegl kernel thread PID: 1329 [ 31.111408] [fglrx] Firegl kernel thread PID: 1330 [ 31.111543] [fglrx] IRQ 50 Enabled [ 31.712938] [fglrx] Gart USWC size:1224 M. [ 31.712941] [fglrx] Gart cacheable size:486 M. [ 31.712945] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 31.712948] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000 [ 31.712950] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 41.312020] eth0: no IPv6 routers present As you can see I get multiple instances of [ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready and then finally it becomes read and I get the message [ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready. I searched askubuntun, ubuntuforum, and the web but couldn't find a solution. Any help would be very much appreciated. Here is the bootchart

  Read the article

• How to configure remote access to multiple subnets behind a SonicWALL NSA 2400

  - by Kyle Noland

  I have a client that uses a SonicWALL NSA 2400 as their firewall. I need to setup a second LAN subnet for a handful of PC. Management has decided that there should be a second subnet even though intend to allow access across the two subnets - I know... I'm having trouble getting communication across the 2 subnets. I can ping each gateway, but I cannot ping or seem to route traffic fron subnet A to subnet B. Here is my current setup: X0 Interface: LAN zone with IP addres 192.168.1.1 X1 Interface: WAN zone with WAN IP address X2 Interface: LAN zone with IP address 192.168.75.1 I have configured ARP and routes for the secondar subnet (X2) according to this SonicWALL KB article: http://www.sonicwall.com/downloads/supporting_multiple_firewalled_subnets_on_sonicos_enhanced.pdf using "Example 1". At this point I don't minding if I have to throw the SonicWALL GVC software VPN client into the mix to make it work. It feel like I have an Access Rule issue, but for testing I made LAN LAN, WAN LAN and VPN LAN rules wide open with the same results.

  Read the article

• Why use FQDN as DNS-server option in DHCP?

  - by Filip Haglund

  I've seen multiple default configurations of DHCP-servers with a FQDN set as the DNS-server option. Doesn't this imply a catch-22, or the need for that DNS-server to be in the hosts file of every single client? example from dhcp3-server in debian 6: option domain-name-servers ns1.internal.example.org; I can see how using a dns name is convenient because it's only an A-record to change, and they can be load balanced if wanted, but I don't see how the client is going to resolve the name. Why are people using FQDN's as DNS-server addresses in DHCP?

  Read the article

• Running a bash script from an HTML link or button

  - by Andrew

  I have a webserver that's hosting lots of images. I want the client to be able to press a button or a link, which will run a bash script, which will create a video based on all these pictures. The script I'm trying to run is this: #!/bin/bash # cd to the directory cd /var/www/gallery # use ffmpeg to make video ffmpeg -pattern_type glob -i 'img-*jpg' -r 1 video.mp4 # Take the first file in the directory and name it video.mp4.jpg (for thumbnail) cp `ls | sort -n | head -1` video.mp4.jpg The script is located on the server. So when the client clicks the link or button, the script will run, and the video is created. I've tried both solutions listed here but I can't seem to get it to work. I have php installed on my server.

  Read the article

• Streaming media from linux server - low footprint is crucial

  - by Mike Haye

  I recently pre-ordered the Raspberry Pi. http://www.raspberrypi.org/faqs For those of you who don't know it, it's a machine with 256 mb ram and a 700 MHz processor for $35. I plan to run linux on an SD card on this machine and have it act as both a htpc, VPN and media server. In regard to the media server part, I need to find some linux software that has a small footprint, but allows me to stream media to other devices connected to the internet (preferably without having to install any additional software on the client machines) Also, I would love if the video could be compressed, so the data usage wouldn't be so big for the client machine (e.g. when I'm using my data plan on my smartphone ;) ) Thanks in advance for any answers :) Mike.

  Read the article

• MWS2K8R2: Enabling Media Sharing using Streaming Media Services Role

  - by TheLizardKing

  So I have a Microsoft Windows Server 2008 R2 that stores a large collection of media (mostly mp3s) and I want to be able to deliver these files using a server/client setup with Windows Media Player being the client. I downloaded and installed Streaming Media Services Role. I even setup a publishing point with on-demand access. My issue is I can connect using WMP12 but it only connects as more of a stream and not a shared library. I can pause/play/skip as if it's a powerful radio station which is ok in my book but what I'd really like to do is allow me to control my music remotely, search and play for artists, maybe create playlists (not required but nice) and even connect it to an xbox. Is Streaming Media Services Role not what I should be using for this? Would installing WMP and sharing using that mechanism be a better option? Any Ideas?

  Read the article

• IPTables masquerading with one NIC

  - by Tuinslak

  Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

  Read the article

• Why is a small fixed vocabulary seen as an advantage to RESTful services?

  - by Matt Esch

  So, a RESTful service has a fixed set of verbs in its vocabulary. A RESTful web service takes these from the HTTP methods. There are some supposed advantages to defining a fixed vocabulary, but I don't really grasp the point. Maybe someone can explain it. Why is a fixed vocabulary as outlined by REST better than dynamically defining a vocabulary for each state? For example, object oriented programming is a popular paradigm. RPC is described to define fixed interfaces, but I don't know why people assume that RPC is limited by these contraints. We could dynamically specify the interface just as a RESTful service dynamically describes its content structure. REST is supposed to be advantageous in that it can grow without extending the vocabulary. RESTful services grow dynamically by adding more resources. What's so wrong about extending a service by dynamically specifying a per-object vocabulary? Why don't we just use the methods that are defined on our objects as the vocabulary and have our services describe to the client what these methods are and whether or not they have side effects? Essentially I get the feeling that the description of a server side resource structure is equivalent to the definition of a vocabulary, but we are then forced to use the limited vocabulary in which to interact with these resources. Does a fixed vocabulary really decouple the concerns of the client from the concerns of the server? I surely have to be concerned with some configuration of the server, this is normally resource location in RESTful services. To complain at the use of a dynamic vocabulary seems unfair because we have to dynamically reason how to understand this configuration in some way anyway. A RESTful service describes the transitions you are able to make by identifying object structure through hypermedia. I just don't understand what makes a fixed vocabulary any better than any self-describing dynamic vocabulary, which could easily work very well in an RPC-like service. Is this just a poor reasoning for the limiting vocabulary of the HTTP protocol?

  Read the article

• Accomplishment Viewer not displaying Ask Ubuntu badges

  - by Frantumn

  I've downloaded the new Ubuntu Accomplishment viewer. I've read and seen pictures of the program combining with AU badges. However, mine doesn't show anything other than the initial Trophies. I've set up my identity with my launcpad email, and I've gone to File/Check Accomplishments and it still doesn't show any of the AU items. Is there something extra I have to do to get this program to work with AU?

  Read the article

• Where does jQuery fit-in with frameworks like JavaScriptMVC, BackboneJS, SproutCore and Knockout?

  - by Prisoner ZERO

  I have been happily using JQuery for the last 2 years and have been quite sucessful creating some really cool functionality with it...so I am very comfortable with it. I also beleive the future of the web will continue on the current client-side path. However... The next challenge seems to be coming in the form of various controller frameworks: KnockoutJS, BackboneJS, SproutCore, JavaScriptMVC (the list goes on). Additonally, there are some great AMD Loader tools for use like RequireJS or LabJS etc. However, jQuery now has define and then capabilities baked-in. It's getting harder-and-harder to keep track of it all... And now, my task seems to be to evaluate/decide-on a strategic-direction for using some form of either an MVC or MVVM framework client-side...but I have so many questions. Where does JQuery fit-in with the various controller-frameworks mentioned above? Is JQuery used alongside each or do some of them have their own 'JQuery-styled version' baked-in? Are tools like RequireJS still needed if you implement one of the various controller-frameworks mentioned above? Does the define and then capabilities baked-into JQuery now supercede the AMD Loader mentioned above? Which one seems most modular? (see notes below) NOTES: One thing I don't want in any future-framework is the requirement of having to take-in vast amounts of functionality that I don't use. Meaning, I would rather use a framework that is truly modular. For example, to use jQuery UI you have to take-in a lot other core libraries that you might not actually use. I will be experimenting with each one, but some REAL feedback would be great. I've seen some 'similar' questions, but none have really answered the above skew. Thanks in advance!

  Read the article

• windows server 2008 r2 remote desktop issue with roaming clients

  - by Patrick D'Haese

  I have the following situation : a Dell windows server 2008 R2 computer, with remote desktop services installed. I have installed a java application making use of a PostgreSql database, and made this application available for clients using RDP. Clients are standard Win XP pc's and Psion Neo handheld devices running Windows CE 5 Pro. The application works fine for clients on standard XP pc's connected directly via cat 5E Ethernet cable to a Dell Powerconnect 2816 switch. The Psion Neo clients connect wireless to the network via Motorola AP6532 access points. These access points are connected via a POE adapter to the same switch as the XP pc's. The Psion devices can connect without any problem and very quickly to the server and to the application using RDP. So far, so good. When the Psion devices move around in the warehouse, and they roam from one access point to the other, the RDP session on the client freezes for approx 1 minute, and then it automatically resumes the session. This freezing is very annoying for the users. Can anyone help in solving this issue? Update (August 9) : After re-installing the access points we have a working situation, but only when connecting to the RDP host : * via a Win Xp SP3 laptop * via a Symbol MC9190 Win CE 6 mobile device When roaming we notice a small hick-up less then 1 second, what is very acceptable. With the Psion NEO it's still not working, when roaming the screen freezes from 2 to 30 seconds. The RDP client on the win xp sp3 laptop and the symbol mc9190 is version 6.0. The RDP client on the neo is version 5.2. I have changed the security layer on the RDP host to RDP security layer (based on forums on the internet), because older RDP clients seem to have issues with the RDP 7.1 protocol on the Win server 2088 R2. Psion adviced us to do some network logging activity on the different devices. We made this logging via wireshark, and based on this the conclusion of Psion is that the server fails in handling tcp-requests. Can anyone give me a second opinion by analysing the wireshark loggings. Thanks in advance. Regards Patrick

  Read the article

• SVN: Error validating server certificate for svn hook linux

  - by Dr Casper Black

  Hi, I managed to setup a SVN (over SSL) server and TortoiseSVN client on Win. I made a Post-Commit Hook for test project. The Post-Commit will update the web dir so the App in PHP can be executed with the newest version. It all works when done over shell. The only problem is, when i commit the changes over the client in Win the change is commited but HOOK throws error post-commit hook failed (exit code 1) with output: Error validating server certificate for 'https://SERVER_IP:443': - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! - The certificate hostname does not match. Certificate information: - Hostname: DEVSRVR - Valid: from Fri, 28 Jan 2011 09:22:45 GMT until Sat, 28 Jan 2012 09:22:45 GMT - Issuer: PHP, SS, SS, SRB - Fingerprint: 5f:d0:50:d6:dd:a6:d4:64:a5:ac:3a:4b:7c:7d:33:e3:75:dd:23:9f (R)eject, accept (t)emporarily or accept (p)ermanently? svn: OPTIONS of 'https://SERVER_IP/svn/myproject/trunk': Server certificate verification failed: certificate issued for a different hostname, issuer is not trusted (https://SERVER_IP)

  Read the article

• Connection to mysql server in SYN_SENT

  - by Sunil

  We are facing a strange problem from last few days between our application server and database server(Mysql): connection to database server from application server hangs in SYN_SENT state and after that we are not able to make any connection to database server on mysql port(3306). When we checked the netstat output on database server its in SYN_RECV state. What I can figure out is mysql server is receiving the SYN request and responding also and its not reaching to the client hence SYN_RECV at server side and SYN_SENT at client side. I think SYN_SENT state should go after some time and because of this other db connection attempts to same server should not hang. Does anybody have any idea how can we resolve this issue? Out setup details : Application server: RHEL 5.4, kernel-release = 2.6.18-164.el5, x86_64 Database server: Mysql Version : 5.1.49 RHEL 5.4, kernel-release = 2.6.18-164.el5, x86_64

  Read the article

• How to selectively route network traffic through VPN on Mac OS X Leopard?

  - by newtonapple

  I don't want to send all my network traffic down to VPN when I'm connected to my company's network (via VPN) from home. For example, when I'm working from home, I would like to be able to backup my all files to the Time Capsule at home and still be able to access the company's internal network. I'm using Leopard's built-in VPN client. I've tried unchecking "Send all traffic over VPN connection." If I do that I will lose access to my company's internal websites be it via curl or the web browser (though internal IPs are still reachable). It'd be ideal if I can selectively choose a set of IPs or domains to be routed through VPN and keep the rest on my own network. Is this achievable with Leopard's built-in VPN client? If you have any software recommendations, I'd like to hear them as well.

  Read the article

• Windows/Samba connection error

  - by Gomibushi

  I have a Linux fileserver serving up /home for linux and windows users. I was able to connect from my windows client, but not from a DC. Then suddenly I could connect from the DC too. The linux servers run Centrify clients, and as such are part of the domain. All on same subnet. This is what the the log.smbd says, repeatedly: [2010/02/11 11:25:57, 0] lib/util_sock.c:read_data(534) read_data: read failure for 4 bytes to client 192.168.200.3. Error = Connection reset by peer On Windows it appeared as an "unknown error". EDIT: the error code is "0x80004005". We are developing a system depended on the samba share, and are worried this will appear again. It would be nice to pin point the root of this. Any ideas what this might be? Places to look?

  Read the article

• Search inside Xournal files (.xoj)

  - by Javad Sadeqzadeh

  I'm a big fan of Evernote, I use it regularly. However, it has a 60MB storage limit (although text files are not going to occupy much space, but the limitation concern still remains). Today, I installed Xournal, which has great features like annotating, nice background, free hand shapes and notes, save in PDF format, and many more. But the big problem is that as far as I've noticd, there is no intrinsic feature for seach inside the notes (created using Xournal with .xoj suffix). I used Catfish File Search application (which creates bash commands for full text search), but it couldn't help as well. Is there anyway to search inside a .xoj file at all? If so, it could be a suitable alternative to evernote, if you put your .xoj files on a cloud (which certainly offers you much more storage space than 60MB). If not, is there any other convenient app similar to Evernote, but with higher storage limit or without a limit? Somebody suggested Zim desktop wiki app, which looks great, but I'm nut sure if I could copy and paste everything there (a mixture of photos and tables and text with various formats and highlights), like what I do with Evernote. And a very useful tool I use is Evernote Web Clipper (browser extension). Of course, having a desktop client like Everpad is a plus, but not the absolute need. PS: I use pocket, so please do suggest that (it only preserve links (which might change over time) not the actual text). I also use google drive or docs, I don't like that for this purpose niether, it's too slow, doesn't have a browser extension and a desktop client. Thank you so much in advance.

  Read the article

• How to Network Boot the BitDefender Rescue CD (PXE)

  - by Aviad

  We’ve already shown you how to use the BitDefender Rescue CD to clean your infected PC, but what if you wanted to achieve the same thing only without a CD over the network? In this guide, we’ll show you how. Image by baronsquirrelHow To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is CompromisedHow to Clean Your Filthy Keyboard in the Dishwasher (Without Ruining it)

  Read the article

• Contests as Ecommerce Marketing Tools

  From growing your email list to creating an online community, a contest can be a valuable small business marketing tool. Strutta CEO, Ben Pickering, offers Web shop owners' tips for running online contests.

  Read the article

• apc.stat causes 500 internal server error

  - by Legit

  When I turn off apc.stat it causes a 500 internal server error. I checked the apache error_log and it's something about: [Tue Jun 26 10:02:59 2012] [error] [client 127.0.0.1] PHP Warning: require(): Filename cannot be empty in /var/www/site1/public/index.php on line 17 [Tue Jun 26 10:02:59 2012] [error] [client 127.0.0.1] PHP Fatal error: require(): Failed opening required '' (include_path='.:/usr/share/pear:/usr/share/php') in /var/www/site1/public/index.php on line 17 I checked that line and here's what it contains: require('./wp-blog-header.php'); I don't see anything wrong with it. Here's my current APC config: APC version: 3.1.10 PHP Version: 5.4.4 How do I resolve this error when i disable apc.stat?

  Read the article

• Is real estate boom again in India?

  - by skzameen

  The present real estate scenario in India is very good. The real estate boom in India is interlinked directly to the industrial, Commercial and economic growth with stability and strong presence of international companies throughout India have made the preferred destination for investment in real estate sector. India is a one of the fast growing economic stock markets For more information about residential and commercial projects or properties log on to www.zameen-zaidad.com, or email to [email protected] Contact Us Zameen-zaidad.com Ph: - +91-11-40024002 M: - +91-9810445860 Share your opinion for www.zameen-zaidad.com portal

  Read the article

• Best C# and SQL server reporting tool [closed]

  - by user65439

  What is the best reporting tool to use with C# applications? I have been playing around with Pentaho (a Java based reporting tool) but would prefer to work with something that integrate better with my c# and SQL server. The reporting requirements are extensive and I need a tool that can generate graphs etc. and can be called from within my c# code to automate and email these reports. Perhaps the people that is more experienced with report generation can help me out with some of the better applications used with C#

  Read the article

• JavaOne 2012 Conference Preview

  - by Janice J. Heiss

  A new article, by noted freelancer Steve Meloan, now up on otn/java, titled “JavaOne 2012 Conference Preview,” looks ahead to the fast approaching JavaOne 2012 Conference, scheduled for September 30-October 4 in San Francisco. The Conference will celebrate and highlight one of the world’s leading technologies. As Meloan states, “With 9 million Java developers worldwide, 5 billion Java cards in use, 3 billion mobile phones running Java, 1 billion Java downloads each year, and 100 percent of Blu-ray disk players and 97 percent of enterprise desktops running Java, Java is a technology that literally permeates our world.”The 2012 JavaOne is organized under seven technical tracks:* Core Java Platform* Development Tools and Techniques* Emerging Languages on the JVM* Enterprise Service Architectures and the Cloud* Java EE Web Profile and Platform Technologies* Java ME, Java Card, Embedded, and Devices* JavaFX and Rich User ExperiencesConference keynotes will lay out the Java roadmap. For the Sunday keynote, such Oracle luminaries as Cameron Purdy, Vice President of Development; Nandini Ramani, Vice President of Engineering, Java Client and Mobile Platforms; Richard Bair, Chief Architect, Client Java Platform; and Mark Reinhold, Chief Architect, Java Platform will be presenting.For the Thursday IBM keynote, Jason McGee, Distinguished Engineer and Chief Architect for IBM PureApplication System, and John Duimovich, Java CTO and IBM Distinguished Engineer, will explore Java and IBM's cloud-based initiatives.All in all, the JavaOne 2012 Conference should be as exciting as ever.Link to the article here. Originally published on blogs.oracle.com/javaone.

  Read the article

• JavaOne 2012 Conference Preview

  - by Janice J. Heiss

  A new article, by noted freelancer Steve Meloan, now up on otn/java, titled “JavaOne 2012 Conference Preview,” looks ahead to the fast approaching JavaOne 2012 Conference, scheduled for September 30-October 4 in San Francisco. The Conference will celebrate and highlight one of the world’s leading technologies. As Meloan states, “With 9 million Java developers worldwide, 5 billion Java cards in use, 3 billion mobile phones running Java, 1 billion Java downloads each year, and 100 percent of Blu-ray disk players and 97 percent of enterprise desktops running Java, Java is a technology that literally permeates our world.” The 2012 JavaOne is organized under seven technical tracks: * Core Java Platform* Development Tools and Techniques* Emerging Languages on the JVM* Enterprise Service Architectures and the Cloud* Java EE Web Profile and Platform Technologies* Java ME, Java Card, Embedded, and Devices* JavaFX and Rich User Experiences Conference keynotes will lay out the Java roadmap. For the Sunday keynote, such Oracle luminaries as Cameron Purdy, Vice President of Development; Nandini Ramani, Vice President of Engineering, Java Client and Mobile Platforms; Richard Bair, Chief Architect, Client Java Platform; and Mark Reinhold, Chief Architect, Java Platform will be presenting. For the Thursday IBM keynote, Jason McGee, Distinguished Engineer and Chief Architect for IBM PureApplication System, and John Duimovich, Java CTO and IBM Distinguished Engineer, will explore Java and IBM's cloud-based initiatives.All in all, the JavaOne 2012 Conference should be as exciting as ever. Link to the article here.

  Read the article

• iOS and Server: OAuth strategy

  - by drekka

  I'm trying to working how to handle authentication when I have iOS clients accessing a Node.js server and want to use services such as Google, Facebook etc to provide basic authentication for my application. My current idea of a typical flow is this: User taps a Facebook/Google button which triggers the OAuth(2) dialogs and authenticates the user on the device. At this point the device has the users access token. This token is saved so that the next time the user uses the app it can be retrieved. The access token is transmitted to my Node.js server which stores it, and tags it as un-verified. The server verifies the token by making a call to Facebook/google for the users email address. If this works the token is flagged as verified and the server knows it has a verified user. If Facebook/google fail to authenticate the token, the server tells iOS client to re-authenticate and present a new token. The iOS client can now access api calls on my Node.js server passing the token each time. As long as the token matches the stored and verified token, the server accepts the call. Obviously the tokens have time limits. I suspect it's possible, but highly unlikely that someone could sniff an access token and attempt to use it within it's lifespan, but other than that I'm hoping this is a reasonably secure method for verification of users on iOS clients without having to roll my own security. Any opinions and advice welcome.

  Read the article

< Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >