Search Results

Search found 13653 results on 547 pages for 'integration testing'.

Page 495/547 | < Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >

• System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

  - by MGOwen

  Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

  Read the article

• Windows 7 & Virtual PC and Internet (gateway) problems on host PC

  - by Mufasa

  I upgraded to Windows 7 on a PC that is a few years old. The CPU was one revision away from having Hyper-V on it. So, I had to install Microsoft Virtual PC 2007 (v6.0.156.0) to run full XP instances instead of the seamless XP virtualization that is advertised so much. That's fine though; the 'older' version is useful since I use it to run different versions of the whole XP/IE stack for testing. (I'm a web developer.) ...And for the one 16-bit application we still use at the office for scheduling. * sigh * The virtual instances work fine, including networking. My issue is that after a reboot or coming out of sleep mode, my host Windows 7 won't connect to the Internet. It will connect to the local network fine. If I disable the "Virtual Machine Network Services" item (I'll call "VMNS" from here on) in the LAN Connection properties box, it starts working. But than the Virtual PC instances lose their network connectivity. If I re-enable VMNS again in the same instance, everything works (Internet on host and in the virtualized instances). But after the next reboot/sleep cycle this starts over. The route table gave me a clue though. When doing a cycle w/ VMNS enabled: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.3.51 20 0.0.0.0 0.0.0.0 10.0.10.10 10.0.3.51 276 ... After VMNS is disabled, the first route goes away. I assume that is for VMNS to intercept virtualized instance's network connections and forward them correctly? Just a guess though. More info: I checked my Firewall settings and Services (because I'm sort of a control nazi and turn off a lot) but couldn't find anything that made sense and if turned on changed anything. So it might be something there I'm missing, but I don't know what. My current hacked solution: So, I figured I'd mess with the routes myself to see if that helped, it did. If I run a route delete 0.0.0.0 on the universal (0.0.0.0) gateway routes, and add back in just the 2nd line with route add 0.0.0.0 mask 0.0.0.0 10.0.10.10--the one that points to my actual gateway (10.0.10.10)--then I don't have to mess with the disable/enable cycle of VMNS, and everything works. Running those two commands is faster then bringing up connection options and disabling and re-enabling VMNS, but I still don't want to have use that hack script every boot either. (Oh, and I also tried messing with hard-coding TCP/IP settings in my network adapter, including setting high metrics, etc., but that didn't help either.) Any suggestions on the right way to fix this?

  Read the article

• Will spreading your servers load not just consume more recourses

  - by Saif Bechan

  I am running a heavy real-time updating website. The amount of recourses needed per user are quite high, ill give you an example. Setup Every visit The application is php/mysql so on every visit static and dynamic content is loaded. Recourses: apache,php,mysql Every second (no more than a second will just be too long) The website needs to be updated real-time so every second there is an ajax call thats updates the website. Recourses: jQuery,apache,php,mysql Avarage spending for single user (spending one minute and visited 3 pages) Apache: +/- 63 requests / responsess serving static and dynamic content (img,css,js,html) php: +/- 63 requests / responses mysql: +/- 63 requests / responses jquery: +/- 60 requests / responses Optimization I want to optimize this process, but I think that maybe it would be just the same in the end. Before implementing and testing (which will take weeks) I wanted to have some second opinions from you guys. Every visit I want to start off with having nginx in the front and work as a proxy to deliver the static content. Recources: Dynamic: apache,php,mysql Static: nginx This will spread the load on apache a lot. Every Second For the script that loads every second I want to set up Node.js server side javascript with nginx in te front. I want to set it up that jquery makes a request ones a minute, and node.js streams the data to the client every second. Recources: jQuery,nginx,node.js,mysql Avarage spending for single user (spending one minute and visited 3 pages) Nginx: 4 requests / responsess serving mostly static conetent(img,css,js) Apache: 3 requests only the pages php: 3 requests only the pages node.js: 1 request / 60 responses jquery: 1 request / 60 responses mysql: 63 requests / responses Optimization As you can see in the optimisation the load from Apache and PHP are lifted and places on nginx and node.js. These are known for there light footprint and good performance. But I am having my doubts, because there are still 2 programs extra loaded in the memory and they consume cpu. So it it better to have less programs that do the job, or more. Before I am going to spend a lot of time setting this up I would like to know if it will be worth the while.

  Read the article

• Looking for a new, free firewall (Sunbelt has a huge hole)

  - by Jason

  I've been using Sunbelt Personal Firewall v. 4.5 (previously Kerio). I've discovered that blocking Firefox connections in the configuration doesn't stop EXISTING Firefox connections. (See my post here yesterday http://superuser.com/questions/132625/sunbelt-firewall-4-5-wont-block-firefox) The "stop all traffic" may work on existing connections - but I'm done testing, as I need to be able to be selective, at any time. I was using the free version, so the "web filtering" option quit working after some time (mostly blocking ads and popups), but I didn't use that anyway. I used the last free version of Kerio before finally having to go to Sunbelt, because Kerio had an unfixed bug where you'd eventually get the BSOD and have to reset Kerio's configuration and start over (configure everything again). So I'm looking for a new Firewall. I don't like ZoneAlarm at all (no offense to all it's users that may be here - personal taste). I need the following: (Sunbelt has all these, except *) - 1. Be able to block in/out to localhost (trusted)/internet selectively for each application with a click (so there's 4 click boxes for each application) [*that effects everything immediately, regardless of what's already connected]. When a new application attempts a connection, you get an allow/deny/remember windows. - 2. Be able to easily set up filter rules for 'individual application'/'all applications,' by protocol, port/address (range), local, remote, in, out. [*Adding a filter rule also doesn't block existing connections in Sunbelt. That needs to work too.] - 3. Have an easy-to-get-to way to "stop all traffic" (like a right click option on the running icon in the task bar). - 4. Be able to set trusted/internet in/out block/allowed (4 things per item) for each of IGMP, ping, DNS, DHCP, VPN, and broadcasts. - 5. Define locahost as trusted/untrusted, define adapter connections as trusted/untrusted. - 6. Block incoming connetions during boot-up and shutdown. - 7. Show existing connections, including local & remote ip/port, protocol, current speed, total bytes transferred, and local ports opened for Listening. - 8. An Intrusion Prevention System which blocks (optionally select each one) known intrustions (long list). - 9. Block/allow applications from starting other applications (deny/allow/remember window). Wish list: A way of knowing what svchost.exe is doing - who is actually using it/calling it. I allowed it for localhost, and selectively allowed it for internet each time the allow/deny window came up. Thanks for any help/suggestions. (I'm using Windows XP SP3.)

  Read the article

• NGINX rewrite rules help. Redirect not working and want to get rid of index.php in urls

  - by Tamerax

  hey! I have 2 questions for nginx users. 1) I'm trying to setup my joomla server onto my new linode running NGINX and after much (like days) of searching and testing, I finally have a config that works with with SEF url plugins...sorta. I was using an apache system on the old server and it used mod_rewrite and life was fine in terms of SEF. Since NGINX doesn't have mod_rewrite, I found something that works BUT it constantly leaves index.php in the urls. ex: http://mysite.com/index.php/forum i want it to be just http://mysite.com/forum but without mod_rewrite it doesn't seem to be possible in joomla that i'm aware of. I know in wordpress it IS possible but I have to use a plugin. Here is my config file: server { listen 80; server_name mysite.com www.mysite.com; access_log /home/public_html/mysite.com/log/access.log; error_log /home/public_html/mysite.com/log/error.log; root /home/public_html/mysite.com/public/; large_client_header_buffers 4 8k; # prevent some 400 errors index index.php index.html; fastcgi_index index.php; location / { expires 30d; error_page 404 = @joomla; log_not_found off; } # Rewrite location @joomla { rewrite ^(.*)$ /index.php?q=last; } # Static Files location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico)$ { access_log off; expires 30d; } # PHP location ~ \.php { keepalive_timeout 0; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /home/public_html/mysite.com/public /$fastcgi_script_name; } } 2) second question should be easy but i can't get it to work. I want to use the same config I posted above and have either mysite.com or www.mysite.com both forward to mysite.com/portal. Basically when you hit up the front page with or without the www, it all gets forwarded to a sub directory on the server I called Portal. I have tried several variations of: rewrite ^/(.*) http://www.example.com/portal/$1 permanent; but it usually ends with firefox telling me there is some crazy loop happening the address bar saying something like mysite.com/portalportalportalportalportal.........on and on. So, any help on either of these issues would be awesome!! Thanks!!

  Read the article

• How to Deploy an ASP.NET Web API- and Browser-based Application to a Production Environment

  - by user69508

  (Please forgive if this is posted in an incorrect forum. We didn’t know exactly where to post it.) We have an ASP.NET Web API single page application - a browser-based app running in IIS to serve up HTML5/CSS3/JavaScript, which talks to the ASP.NET Web API endpoint only to access a database and transfer JSON data. Everything is working great in our development environment - that is, we have one Visual Studio solution with an ASP.NET Web API project and two class library projects for data access. While development and testing on development boxes, using IIS Express to a localhost:port to run the site and access the Web API, everything is fine. Now we need to move it to a production environment (and we’re having problems - or just not understanding what needs to be done). The production environment is all internal (nothing will be exposed on the public Internet). There are two domains. One domain, the corporate domain, is where all users login normally. The other domain, the process domain, contains the SQL Server instance that our app and Web API will need to access. The IT staff wants to put a DMZ between the two domains to house the IIS app and shield the users on the corporate domain from having access into the process domain directly. So, I guess what they want is: corp domain (end users) <– firewall (open port 80) <– DMZ (web server running IIS) <– firewall (open port 80 or 1433????) <– process domain (IIS for Web API and SQL Server) We’re developers and don’t really understand all the networking aspects, so we’re wondering how to deploy our browser/Web API application in this scenario. Do we need to break up our application so that all the client code (HTML5/CSS3/JavaScript/images/etc.) is on the IIS server in the DMZ, while the Web API gets installed on the server in the process domain? Or, does the entire app (client code and Web API) stay together on the IIS server in the DMZ, which then somehow accesses the SQL Server instance to get data? From the IIS server and app in the DMZ, would you simply access the Web API on the server in the process domain by going to "http://server/appname/api/getitmes"? In the second firewall between the DMZ and the process domain, would you have to open port 1433 or just port 80 since the Web API is a HTTP endpoint? Or, is there some better way of deployment (i.e., how ASP.NET Web API single page applications written all in HTML5 and JavaScript supposed to be deployed to production environments?)? I’m sure there are other questions, but we’ll start with these. Thanks!!! (Note: the servers are Win2k8 R2, SQL Server 2k8 R2, and IIS 7.5.)

  Read the article

• VirtualBox Port Forward not working when Guest IP *IS* specified (while doc says opposite)

  - by Patrick

  Trying to port forward from host (Mac OS X) 127.0.0.1:8282 - guest (CentOS)'s 10.10.10.10:8080. Existing port forwards include 127.0.0.1:8181 and 9191 to guest without any IP specified (so whatever it gets through DHCP, as explained in the documentation). Here is how the non-working binding was added: VBoxManage modifyvm "VM name" --natpf1 "rule3,tcp,127.0.0.1,8282,10.10.10.10,8080" Here is how the working ones were added: VBoxManage modifyvm "VM name" --natpf1 "rule1,tcp,127.0.0.1,8181,,80" VBoxManage modifyvm "VM name" --natpf1 "rule2,tcp,127.0.0.1,9191,,9090" And by "non-working", I of course mean not listening (as a prerequisite to forwarding): $ lsof -Pi -n|grep Virtual|grep LISTEN VirtualBo 27050 user 21u IPv4 0x2bbdc68fd363175d 0t0 TCP 127.0.0.1:9191 (LISTEN) VirtualBo 27050 user 22u IPv4 0x2bbdc68fd0e0af75 0t0 TCP 127.0.0.1:8181 (LISTEN) There should be a similar line above but with 127.0.0.1:8282. Just to be clear, this port is listening perfectly fine on the guest itself. And when I remove the guest IP (i.e., clear the 10.10.10.10) the forward works fine, albeit to eth0 (not eth1 where I need it). I can tcpdump and watch the traffic flow back and forth. And yes, I've disabled iptables entirely while testing -- it's not getting blocked anywhere on the guest. As VirtualBox writes in their documentation, you are required to specify the guest IP if it's static (makes sense, no DHCP record it keeps): "If for some reason the guest uses a static assigned IP address not leased from the built-in DHCP server, it is required to specify the guest IP when registering the forwarding rule:". However, doing so (as I need to), seems to break the port forward with nary a report in any log file I can find. (I've reviewed everything in ~/Library/VirtualBox/). Other notes: While I used the above command to add the third rule, I've also verified it showed up correctly in GUI and then removed/re-added from there just to make sure). This forum link -- while very dated -- looks somewhat related in that a port forward to a static IP was not appearing (perhaps they think due to lack of gratuitous arp being sent for host to know IP is there/avail?). Anyway, what gives? Is this still buggy? Any suggestions? If not, easy enough workarounds? What's interesting is that this works perfectly fine on another user's Mac, however he's running a slightly older version (4.3.6 v. 4.3.12).

  Read the article

• Troubleshooting Network Speeds -- The Age Old Inquiry

  - by John K

  I'm looking for help with what I'm sure is an age old question. I've found myself in a situation of yearning to understand network throughput more clearly, but I can't seem to find information that makes it "click" We have a few servers distributed geographically, running various versions of Windows. Assuming we always use one host (a desktop) as the source, when copying data from that host to other servers across the country, we see a high variance in speed. In some cases, we can copy data at 12MB/s consistently, in others, we're seeing 0.8 MB/s. It should be noted, after testing 8 destinations, we always seem to be at either 0.6-0.8MB/s or 11-12 MB/s. In the building we're primarily concerned with, we have an OC-3 connection to our ISP. I know there are a lot of variables at play, but I guess I was hoping the experts here could help answer a few basic questions to help bolster my understanding. 1.) For older machines, running Windows XP, server 2003, etc, with a 100Mbps Ethernet card and 72 ms typical latency, does 0.8 MB/s sound at all reasonable? Or do you think that slow enough to indicate a problem? 2.) The classic "mathematical fastest speed" of "throughput = TCP window / latency," is, in our case, calculated to 0.8 MB/s (64Kb / 72 ms). My understanding is that is an upper bounds; that you would never expect to reach (due to overhead) let alone surpass that speed. In some cases though, we're seeing speeds of 12.3 MB/s. There are Steelhead accelerators scattered around the network, could those account for such a higher transfer rate? 3.) It's been suggested that the use SMB vs. SMB2 could explain the differences in speed. Indeed, as expected, packet captures show both being used depending on the OS versions in play, as we would expect. I understand what determines SMB2 being used or not, but I'm curious to know what kind of performance gain you can expect with SMB2. My problem simply seems to be a lack of experience, and more importantly, perspective, in terms of what are and are not reasonable network speeds. Could anyone help impart come context/perspective?

  Read the article

• Hardware for multipurpose home server

  - by Michael Dmitry Azarkevich

  Hi guys, I'm looking to set up a multipurpose home server and hoped you could help me with the hardware selection. First of all, the services it will provide: Hosting a MySQL database (for training and testing purposes) FTP server Personal Mail Server Home media server So with this in mind I've done some research, and found some viable solutions: A standard PC with the appropriate software (Either second hand or new) A non-solid state mini-ITX system A solid state, fanless mini-ITX system I've also noted the pros and cons of each system: A standard second hand PC with old hardware would be the cheapest option. It could also have lacking processing power, not enough RAM and generally faulty hardware. Also, huge power consumption heat generation and noise levels. A standard new PC would have top-notch hardware and will stay that way for quite some time, so it's a good investment. But again, the main problem is power consumption, heat generation and noise levels. A non-solid state mini-ITX system would have the advantages of lower power consumption, lower cost (as far as I can see) and long lasting hardware. But it will generate noise and heat which will be even worse because of the size. A solid state, fanless mini-ITX system would have all the advantages of a non-solid state mini-ITX but with minimal noise and heat. The main disadvantage is the read\write problems of flash memory. All in all I'm leaning towards a non-solid state mini-ITX because of the read\write issues of flash memory. So, after this overview of what I do know, my questions are: Are all these services even providable from a single server? To my best understanding they are, but then again, I might be wrong. Is any of these solutions viable? If yes, which one is the best for my purposes? If not, what would you suggest? Also, on a more software oriented note: OS wise, I'm planning to run Linux. I'm currently thinking of four options I've been recommended: CentOS, Gentoo, DSL (Damn Small Linux) and LFS (Linux From Scratch). Any thoughts on this? Any other distro you would recomend? Regarding FTP services, I've herd good things about FileZila. Anyone has any experience with that? Do you recommend it? Do you recommend something else? Regarding the Mail service, I know nothing about this except that it exists. Any software you recommend for this task? Home media, same as mail service. Any recommended software? Thank you very much.

  Read the article

• Should I choose KVM/XEN over OpenVZ or use them together?

  - by Krystian

  I've got a dual xeon e5504 server, with [for now] only 8GB of ram. Storage is'n impressive either: 3x 146GB sas in raid5 + 500GB sata drives. Currently it works as a development server, but it's over speced for our needs and since our development methods changed through last 2 years we decided it will work as a production system for some of our applications + we would like to have a separate system for testing/research. Our apps are mainly web apps deployed on tomcats [plural as some of the apps require older versions] and connected to Postgres. I would like to have a production system, where only httpd+tomcat+db are setup and nothing else runs there. Sterile system. Apart from that, I would like a test system, where I can play with different JVM settings, deploy my test apps, play with tomcat/httpd settings and restart them without interfering with the production system. Apart from that, I would like to be able to play with different linux flavors, with newer kernels to test how they work etc. I know, this is not possible with OpenVZ and I would have to choose KVM for that. I am thinking about merging the two, and setting up a KVM to be able to work with different systems [linux only to be frank] + use openVZ to setup separate machines for my development needs. I would simply go with that, but reading here and there about the performance impact full virtualization has over containers and looking at the specs of my server makes me think twice about it. I don't want to loose too much performance, especially because of the nature of my apps [few JVMs running at the same time]. It will be my first time with virtualization, apart from using desktop virtualbox/vmserver. Although I am a fast learner I don't want to mess with the main system so much that it will break the production apps or make them crawl. Although they are more or less internal apps and they don't produce much load, they need to be stable. I've read, that KVM host is a normal linux installation and it allows to run normal processes on it. If that is so, does it allow to run openVZ as well? I mean... can I have KVM and OpenVZ running on the same system/kernel? Or do I have to setup another system to run OpenVZ containers? How much performance impact can this have for me? Will my hardware suffice? oh and one more thing... unfortunately I'm quite limited with the funds... I'm looking for a free solution only :/

  Read the article

• Why is my concurrency capacity so low for my web app on a LAMP EC2 instance?

  - by AMF

  I come from a web developer background and have been humming along building my PHP app, using the CakePHP framework. The problem arose when I began the ab (Apache Bench) testing on the Amazon EC2 instance in which the app resides. I'm getting pretty horrendous average page load times, even though I'm running a c1.medium instance (2 cores, 2GB RAM), and I think I'm doing everything right. I would run: ab -n 200 -c 20 http://localhost/heavy-but-view-cached-page.php Here are the results: Concurrency Level: 20 Time taken for tests: 48.197 seconds Complete requests: 200 Failed requests: 0 Write errors: 0 Total transferred: 392111200 bytes HTML transferred: 392047600 bytes Requests per second: 4.15 [#/sec] (mean) Time per request: 4819.723 [ms] (mean) Time per request: 240.986 [ms] (mean, across all concurrent requests) Transfer rate: 7944.88 [Kbytes/sec] received While the ab test is running, I run VMStat, which shows that Swap stays at 0, CPU is constantly at 80-100% (although I'm not sure I can trust this on a VM), RAM utilization ramps up to about 1.6G (leaving 400M free). Load goes up to about 8 and site slows to a crawl. Here's what I think I'm doing right on the code side: In Chrome browser uncached pages typically load in 800-1000ms, and cached pages load in 300-500ms. Not stunning, but not terrible either. Thanks to view caching, there might be at most one DB query per page-load to write session data. So we can rule out a DB bottleneck. I have APC on. I am using Memcached to serve the view cache and other site caches. xhprof code profiler shows that cached pages take up 10MB-40MB in memory and 100ms - 1000ms in wall time. Pages that would be the worst offenders would look something like this in xhprof: Total Incl. Wall Time (microsec): 330,143 microsecs Total Incl. CPU (microsecs): 320,019 microsecs Total Incl. MemUse (bytes): 36,786,192 bytes Total Incl. PeakMemUse (bytes): 46,667,008 bytes Number of Function Calls: 5,195 My Apache config: KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 3 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 120 MaxRequestsPerChild 1000 </IfModule> Is there something wrong with the server? Some gotcha with the EC2? Or is it my code? Some obvious setting I should look into? Too many DNS lookups? What am I missing? I really want to get to 1,000 concurrency capacity, but at this rate, it ain't gonna happen.

  Read the article

• netbook intel GMA 3150 external monitor 1920x1080 flicker problem

  - by seyenne

  Dear all, i recently purchased a acer netbook (apsire one d260). It runs flawlessly. Yesterday I bought a samsung 23" TFT with a native resolution of 1920x1080. According to the information found in the internet and my local computer dealer, the intel chipset can handle the native resolution of the monitor. However, this is only partly the case. I use the VGA cabel to connect, the monitor instantly switches to the native resolution and now the problem: Occasionaly, especially the first 2 hours after booting up, I have a flickering all over the screen, sometimes the entire screen is shaking and spinning around like crazy. I figured out, that lowering the resolution avoids the flicker but this helps only for some time. I can rule out that it's the monitor's problem since I found no issues with another notebook. Right now, I have no problems with the netbook, for about 30 minutes I didn't experience any issues... But I don't know for how long, it occurs without warning :-) I'm worried that if I would bring the netbook back to the dealer and explain my problem, after testing it on an external screen in the local shop, everything works just fine... And I won't get helped with the problem because I can't prove it. (I'm currently in Thailand and over here, customer service is nothing like back home in Germany) What can I do? Is this a driver related issue? (I installed the latest GPU driver) Is it because of the VGA cable? (But why does it work sometimes without any problems and with no issues on the other notebook) I monitored the GPU/CPU temperature, nothing changes really over time..Can it simply be a faulty GPU and is a replacement justifiable? I'm really stressed now because for the time I'm writing, the flickering didn't occur...but for sure, soon or later it will happen again.. I Forgot to mention, the problem also happens if the netbook runs on battery, unplugged. So the only hardware that is plugged is the TFT screen. ...........and here it comes again, flickering has just begun. NEED HELP! Thank you all for reading through this and giving any suggestions if possible. Cheers

  Read the article

• debugging JBoss 100% CPU usage

  - by Nate

  We are using JBoss to run two of our WARs. One is our web app, the other is our web service. The web app accesses a database on another machine and makes requests to the web service. The web service makes JMS requests to other machines, aggregates the data, and returns it. At our biggest client, about once a month the JBoss Java process takes 100% of all CPUs. The machine running JBoss has 8 CPUs. Our web app is still accessible during this time, however pages take about 3 minutes to load. Restarting JBoss restores everything to normal. The database machine and all the other machines are fine, only the machine running JBoss is affected. Memory usage is normal. Network utilization is normal. There are no suspect error messages in the JBoss logs. I have set up a test environment as close as possible to the client's production environment and I've done load testing with as much as 2x the number of concurrent users. I have not gotten my test environment to replicate the problem. Where do we go from here? How can we narrow down the problem? Currently the only plan we have is to wait until the problem occurs in production on its own, then do some debugging to determine the cause. So far people have just restarted JBoss when the problem occurred to minimize down time. Next time it happens they will get a developer to take a look. The question is, next time it happens, what can be done to determine the cause? We could setup a separate JBoss instance on the same box and install the web app separately from the web service. This way when the problem next occurs we will know which WAR has the problem (assuming it is our code). This doesn't narrow it down much though. Should I enable JMX remote? This way the next time the problem occurs I can connect with VisualVM and see which threads are taking the CPU and what the hell they are doing. However, is there a significant down side to enabling JMX remote in a production environment? Is there another way to see what threads are eating the CPU and to get a stacktrace to see what they are doing? Any other ideas? Thanks!

  Read the article

• NSMutableURLRequest returns null on real device, while returning image on simulator

  - by Yanchi

  I was testing my app that I've been working on for past 2 months. Basically it requests for JSON, that contains info about items. One field of JSON file is image_url. When I want to display this image, I need to download it from another server, that needs additional credentials. So it goes like this- In my cellForRowAtIndexPath I'm doing NSDictionary *aucdict = [jsonAukResults objectAtIndex:indexPath.row]; NSURL *imageURL = [NSURL URLWithString:[aucdict objectForKey:@"img_url"]]; NSString *authPString = [[[NSString stringWithFormat:@"login:password"]dataUsingEncoding:NSUTF8StringEncoding] base64EncodedString]; NSString *verifPString = [NSString stringWithFormat:@"Image %@",authPString]; NSMutableURLRequest *Prequest = [[NSMutableURLRequest alloc] initWithURL:imageURL]; [Prequest setValue:verifPString forHTTPHeaderField:@"Authorization"]; NSError *error = nil; NSURLResponse *resp = nil; NSData *picresult = [NSURLConnection sendSynchronousRequest:Prequest returningResponse:&resp error:&error]; UIImage *imageLoad = [[UIImage alloc] initWithData:picresult]; Now, I just obscured credentials (they are not login:password :)). My problem is, that right now, I get 3 items. All 3 have image on same server. I can get two of them with this code no problem. However third one is problematic, I always get (NULL) imageLoad. On my simulator, everything works fine, I get all 3 pictures. On real device I get error. I tried to NSURLConnection with error and response so I could debug better. This is what I got in my error. Printing description of error: Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “server name” which could put your confidential information at risk." UserInfo=0x1e5a3080 {NSErrorFailingURLStringKey=pictureLink.jpg, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSErrorFailingURLKey=pictureLink.jpg, NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “server name” which could put your confidential information at risk., NSUnderlyingError=0x1e5a30e0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “server name” which could put your confidential information at risk.", NSURLErrorFailingURLPeerTrustErrorKey=} I dont use SSL so Im really confused as what could cause this error. Btw, everything worked fine until now (this is my initial screen, so it's been done for good month and a half). Now I started to do graphics and this problem popped up :(

  Read the article

• Facebook Oauth Logout

  - by Derek Troy-West

  I have an application that integrates with Facebook using Oauth 2. I can authorize with FB and query their REST and Graph APIs perfectly well, but when I authorize an active browser session is created with FB. I can then log-out of my application just fine, but the session with FB persists, so if anyone else uses the browser they will see the previous users FB account (unless the previous user manually logs out of FB also). The steps I take to authorize are: Call [LINK: graph.facebook.com/oauth/authorize?client_id...] This step opens a Facebook login/connect window if the user's browser doesn't already have an active FB session. Once they log-in to facebook they redirect to my site with a code I can exchange for an oauth token. Call [LINK: graph.facebook.com/oauth/access_token?client_id..] with the code from (1) Now I have an Oauth Token, and the user's browser is logged into my site, and into FB. I call a bunch of APIs to do stuff: i.e. [LINK: graph.facebook.com/me?access_token=..] Lets say my user wants to log out of my site. The FB terms and conditions demand that I perform Single Sign Off, so when the user logs out of my site, they also are logged out of Facebook. There are arguments that this is a bit daft, but I'm happy to comply if there is any way of actually achieving that. I have seen suggestions that: A. I use the Javascript API to logout: FB.Connect.logout(). Well I tried using that, but it didn't work, and I'm not sure exactly how it could, as I don't use the Javascript API in any way on my site. The session isn't maintained or created by the Javascript API so I'm not sure how it's supposed to expire it either. B. Use [LINK: facebook.com/logout.php]. This was suggested by an admin in the Facebook forums some time ago. The example given related to the old way of getting FB sessions (non-oauth) so I don't think I can apply it in my case. C. Use the old REST api expireSession or revokeAuthorization. I tried both of these and while they do expire the Oauth token they don't invalidate the session that the browser is currently using so it has no effect, the user is not logged out of Facebook. I'm really at a bit of a loose end, the Facebook documentation is patchy, ambiguous and pretty poor. The support on the forums is non-existant, at the moment I can't even log in to the facebook forum, and aside from that, their own FB Connect integration doesn't even work on the forum itself. Doesn't inspire much confidence. Ta for any help you can offer. Derek ps. Had to change HTTPS to LINK, not enough karma to post links which is probably fair enough.

  Read the article

• Combining mousedown and mousemove events together with Javascript (JQUERY?)

  - by webzide

  Dear experts, I would like to combine a the mousedown and mousemove and mouseup events together. Basically the application of this would be making a UI for selecting elements. Like selecting icons in windows when the mouse is clicked down and as you move it, a dotted border dynamically moves with it. I know this is possible with the predefined UI of Jquery. But I am building a web application that requires the integration of this and would like to know the technique. I spend hours on this and it just doesn't work. here's is the code i have so far and the logic behind it: $(document).bind('mousedown', function (evt) { evt = (evt) ? evt : event; startX = evt.clientX; startY = evt.clientY; div = document.createElement("div"); div.style.position = "absolute"; div.style.left = startX + "px"; div.style.top = startY + "px"; div.style.border = "1px dotted #DDDDDD"; $(document).bind('mousemove', function(evt){ evt=(evt) ? evt: event; alert("TESTING OF THIS WORKS"); }); }); $(document).bind('mouseup',function(evt) { var evt = (evt) ? evt : event; var endX = evt.clientX; var endY = evt.clientY; difX = (endX - startX); difY = (endY - startY) if ((difX || difY) > 0) { div.style.width = difX + "px"; div.style.height = difY + "px"; document.body.appendChild(div); } $(this).unbind('mousemove'); }); As you can see I have placed an event binding of mousemove into the event function of mousedown so that it can only be invoked when the mouse is down. but the problem is, once that event is binded, it does not come off. The borders does not move dynamically as expected. Maybe my logic is entirely messed up. If anyone could point me the the right direction that would be great. THanks in advance.

  Read the article

• ActionScript/Flex ArrayCollection of Number objects to Java Collection<Long> using BlazeDS

  - by Justin

  Hello, I am using Flex 3 and make a call through a RemoteObject to a Java 1.6 method and exposed with BlazeDS and Spring 2.5.5 Integration over a SecureAMFChannel. The ActionScript is as follows (this code is an example of the real thing which is on a separate dev network); import com.adobe.cairngorm.business.ServiceLocator; import mx.collections.ArrayCollection; import mx.rpc.remoting.RemoteObject; import mx.rpc.IResponder; public class MyClass implements IResponder { private var service:RemoteObject = ServiceLocator.getInstance().getRemoteOjbect("mySerivce"); public MyClass() { [ArrayElementType("Number")] private var myArray:ArrayCollection; var id1:Number = 1; var id2:Number = 2; var id3:Number = 3; myArray = new ArrayCollection([id1, id2, id3]); getData(myArray); } public function getData(myArrayParam:ArrayCollection):void { var token:AsyncToken = service.getData(myArrayParam); token.addResponder(this.responder); //Assume responder implementation method exists and works } } This will make a call, once created to the service Java class which is exposed through BlazeDS (assume the mechanics work because they do for all other calls not involving Collection parameters). My Java service class looks like this; public class MySerivce { public Collection<DataObjectPOJO> getData(Collection<Long> myArrayParam) { //The following line is never executed and throws an exception for (Long l : myArrayParam) { System.out.println(l); } } } The exception that is thrown is a ClassCastException saying that a java.lang.Integer cannot be cast to a java.lang.Long. I worked around this issue by looping through the collection using Object instead, checking to see if it is an Integer, cast it to one, then do a .longValue() on it then add it to a temp ArraList. Yuk. The big problem is my application is supposed to handle records in the billions from a DB and the id will overflow the 2.147 billion limit of an integer. I would love to have BlazeDS or the JavaAdapter in it, translate the ActionScript Number to a Long as specified in the method. I hate that even though I use the generic the underlying element type of the collection is an Integer. If this was straight Java, it wouldn't compile. Any ideas are appreciated. Solutions are even better! :)

  Read the article

• <msbuild/> task fails while <devenv/> succeeds for MFC application in CruiseControl.NET?

  - by ee

  The Overview I am working on a Continuous Integration build of a MFC appliction via CruiseControl.net and VS2010. When building my .sln, a "Visual Studio" CCNet task (<devenv/>) works, but a simple MSBuild wrapper script (see below) run via the CCNet <msbuild/> task fails with errors like: error RC1015: cannot open include file 'winres.h'.. error C1083: Cannot open include file: 'afxwin.h': No such file or directory error C1083: Cannot open include file: 'afx.h': No such file or directory The Question How can I adjust the build environment of my msbuild wrapper so that the application builds correctly? (Pretty clearly the MFC paths aren't right for the msbuild environment, but how do i fix it for MSBuild+VS2010+MFC+CCNet?) Background Details We have successfully upgraded an MFC application (.exe with some MFC extension .dlls) to Visual Studio 2010 and can compile the application without issue on developer machines. Now I am working on compiling the application on the CI server environment I did a full installation of VS2010 (Professional) on the build server. In this way, I knew everything I needed would be on the machine (one way or another) and that this would be consistent with developer machines. VS2010 is correctly installed on the CI server, and the devenv task works as expected I now have a wrapper MSBuild script that does some extended version processing and then builds the .sln for the application via an MSBuild task. This wrapper script is run via CCNet's MSBuild task and fails with the above mentioned errors The Simple MSBuild Wrapper <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Target Name="Build"> <!-- Doing some versioning stuff here--> <MSBuild Projects="target.sln" Properties="Configuration=ReleaseUnicode;Platform=Any CPU;..." /> </Target> </Project> My Assumptions This seems to be a missing/wrong configuration of include paths to standard header resources of the MFC persuasion I should be able to coerce the MSBuild environment to consider the relevant resource files from my VS2010 install and have this approach work. Given the vs2010 msbuild support for visual c++ projects (.vcxproj), shouldn't msbuilding a solution be pretty close to compiling via visual studio? But how do I do that? Am I setting Environment variables? Registry settings? I can see how one can inject additional directories in some cases, but this seems to need a more systemic configuration at the compiler defaults level. Update 1 This appears to only ever happen in two cases: resource compilation (rc.exe), and precompiled header (stdafx.h) compilation, and only for certain projects? I was thinking it was across the board, but indeed it appears only to be in these cases. I guess I will keep digging and hope someone has some insight they would be willing to share...

  Read the article

• MinGW/G++/g95 link problem - libf95 undefined reference to `MAIN_'

  - by pivakaka

  Hi folks, Summing up, my problem consists on compiling g95 objects inside a C++ application. Actually, I'm constructing an interface for an old fortran program. For this task, I'm using the wxWidgets GUI library, and calling fortran subroutines when necessary. At the beginning, I was developing the entire project compiling my fortran files with gfortran (which comes with GCC) and linking them with my app by the g++ -o... command. Everything was working fine but some numbers values calculated by my fotran subroutines returned NAN values. Doing some research, I realized that compiling my fortran files with gfortran with the -m32 flag, generates this NAN values problem. Although compiling with -m64 flag, my code works properly well. The only trouble here is that my App should be 32bits and then I tryed another compiller. Here I found g95 Fortran compiler, which compiles my fortran code and gives the right output on a 32bits environment. But when I'm trying to link these g95 objects into my program I see this following error: g++ -oCyclonTechTower.exe src\fortran\Modulo_Global.o src\fortran\Prop_Fisicas.o src\fortran\inversa.o src\fortran\tower.o src\fortran\PredadeCarga.o src\fortran\gota.o src\fortran\tadi.o src\view\SimulationORSATCustomDialog.o src\view\SimulationChildGUIFrame.o src\view\ParentGUIFrame.o src\view\ClientGUIFrame.o src\model\TowerData.o src\controller\SimulationController.o src\THEIACyclonTechTower.o ..\Resource\resource.o -Lc:\wxWidgets-2.6.4\lib -Lc:\MinGW\lib\gcc-lib\i686-pc-mingw32\4.1.2 -Bdynamic -Wl,--subsystem,windows -mwindows c:\wxWidgets-2.6.4\lib\libwx_mswu-2.6.a -lwxregexu-2.6 -lwxexpat-2.6 -lwxtiff-2.6 -lwxjpeg-2.6 -lwxpng-2.6 -lwxzlib-2.6 -lrpcrt4 -loleaut32 -lole32 -luuid -lwinspool -lwinmm -lshell32 -lcomctl32 -lcomdlg32 -lctl3d32 -ladvapi32 -lwsock32 -lgdi32 -lgcc -lf95 c:\MinGW\lib\gcc-lib\i686-pc-mingw32\4.1.2/libf95.a(main.o):(.text+0x32): undefined reference to `MAIN_' collect2: ld returned 1 exit status Build error occurred, build is stopped Time consumed: 1531 ms. I have already read the g95 Manual for integration with C++ and I'm actually calling these functions bellow for controlling the fortran environment: void g95_runtime_start(int argc, char *argv[]); void g95_runtime_stop(); I also included the g95 Fortran Runtime Library libf95.a and the libgcc.a into my linker command. Finishing, I don't have a main method implemented because this is managed by wxWidgets, and my fortran subroutines can not have a main function because this is a C++ program calling fortran functions. Can some of you guys help me with this problem? How can I fix this undefined reference to MAIN__ problem? Any idea will be much appreciated. Thanks in advance, George

  Read the article

• Very slow compile times on Visual Studio

  - by johnc

  We are getting very slow compile times, which can take upwards of 20+ minutes on dual core 2GHz, 2G Ram machines. A lot of this is due to the size of our solution which has grown to 70+ projects, as well as VSS which is a bottle neck in itself when you have a lot of files. (swapping out VSS is not an option unfortunately, so I don't want this to descend into a VSS bash) We are looking at combing projects (not nice, as we like the separation of concerns, but is a good opportunity to refactor away some dead wood). We are also looking at having multiple solutions to achieve greater separation of concerns and quicker compile times for each element of the application. This I can see will become a dll hell as we try to keep things in synch. I am interested to know how other teams have dealt with this scaling issue, what do you do when your code base reaches a critical mass that you are wasting half the day watching the status bar deliver compile messages UPDATE Apologies, I neglected to mention this is a C# solution. Thanks for all the cpp suggestions, but it's been a few years since I've had to worry about headers. At a distance I say I miss C++, but I'm not sure I want to go back EDIT: Nice suggestions that have helped so far (not saying there aren't other nice suggestions below, just what has helped) New 3GHz laptop - the power of lost utilization works wonders when whinging to management Disable Anti Virus during compile 'Disconnecting' from VSS (actually the network) during compile - I may get us to remove VS-VSS integration altogether and stick to using the VSS UI Still not rip-snorting through a compile, but every bit helps. Orion did mention in a comment that generics may have a play also. From my tests there does appear to be a minimal performance hit, but not high enough to sure - compile times can be inconsistent due to disc activity. Due to time limitations, my tests didn't include as many Generics, or as much code, as would appear in live system, so that may accumulate. I wouldn't avoid using generics where they are supposed to be used, just for compile time performance WORKAROUND We are testing the practice of building new areas of the application in new solutions, importing in the latest dlls as required, them integrating them into the larger solution when we are happy with them. We may also do them same to existing code by creating temporary solutions that just encapsulate the areas we need to work on, and throwing them away after reintegrating the code. We need to weigh up the time it will take to reintegrate this code against the time we gain by not having Rip Van Winkle like experiences with rapid recompiling during development.

  Read the article

• How to configure Hudson and git plugin with an SSH key

  - by jlpp

  I've got Hudson (continuous integration system) with the git plugin running on a Tomcat Windows Service. msysgit is installed and the msysgit bin dir is in the path. PuTTY/Pageant/plink are installed and msysgit is configured to use them. When I run a job that attempts to clone the git repository I get the following error: $ git clone -o origin git@hostname:project.git "e:\HUDSON_HOME\jobs\Project Trunk\workspace" ERROR: Error cloning remote repo 'origin' : Could not clone git@hostname:project.git ERROR: Cause: Error performing git clone -o origin git@hostname:project.git e:\HUDSON_HOME\jobs\Project Trunk\workspace Trying next repository ERROR: Could not clone from a repository FATAL: Could not clone hudson.plugins.git.GitException: Could not clone Running git clone -o origin git@hostname:project.git "e:\HUDSON_HOME\jobs\Project Trunk\workspace" from the command line works without error. I've confirmed that my issue is not the same as http://stackoverflow.com/questions/1177292/hudson-git-clone-error because git is in the path and I don't get any error about the git executable on Hudson's Configure System page. This leads me to believe that the problem is that the user who owns the Tomcat/Hudson Windows service (Local System) has no SSH key set up to be able to clone the git repository. My question is, how can I set things up so that the git plugin/msysgit know to use a particular SSH key when trying to clone? I don't think Pageant will work because the Tomcat service is running as the "Local System" user, but I may be wrong. I have tried setting Pageant up as a service (using runassvc.exe), passing the appropriate key, and having it run as "Local System". The Tomcat/Hudson service doesn't seem to be able to see the key from the pageant service. Are there any other techniques for setting up a key? Thanks. EDIT: The discussion on http://n4.nabble.com/Hudson-with-git-and-ssh-td375633.html shows that someone else had a similar question. ssh-agent was suggested and this tool does come with msysgit but I'm not sure how to use it in conjunction with the Hudson service. Still, good clue if anyone can fill in the gaps. Thanks to Peter for the comment with the link. Also, the discussion on http://n4.nabble.com/questions-about-git-and-github-plug-ins-td383420.html starts off with the same question. I'm trying to resurrect that thread.

  Read the article

• Spring mail support - no subject

  - by Trick

  I have updated my libraries, and now e-mails are sent without subject. I don't know where this happened... Mail API is 1.4.3., Spring 2.5.6. and Spring Integration Mail 1.0.3.RELEASE. <!-- Definitions for SMTP server --> <bean id="mailSender" class="org.springframework.mail.javamail.JavaMailSenderImpl"> <property name="host" value="${mail.host}" /> <property name="username" value="${mail.username}" /> <property name="password" value="${mail.password}" /> </bean> <bean id="adminMailTemplate" class="org.springframework.mail.SimpleMailMessage" > <property name="from" value="${mail.admin.from}" /> <property name="to" value="${mail.admin.to}" /> <property name="cc"> <list> <value>${mail.admin.cc1}</value> </list> </property> </bean> <!-- Mail service definition --> <bean id="mailService" class="net.bbb.core.service.impl.MailServiceImpl"> <property name="sender" ref="mailSender"/> <property name="mail" ref="adminMailTemplate"/> </bean> And properties mail.host,mail.username,mail.password,mail.admin.from,mail.admin.to, mail.admin.cc1. Java class: /** The sender. */ private MailSender sender; /** The mail. */ private SimpleMailMessage mail; public void sendMail() { this.mail.setSubject("Subject"); this.mail.setText("msg body"); try { getSender().send(this.mail); } catch (MailException e) { log.error("Error sending mail!",e); } } public SimpleMailMessage getMail() { return this.mail; } public void setMail(SimpleMailMessage mail) { this.mail = mail; } public MailSender getSender() { return this.sender; } public void setSender(MailSender mailSender1) { this.sender = mailSender1; } Everything worked before, I am wondering if there may be any conflicts with new libraries.

  Read the article

• Using the PayPal API in an iPhone application

  - by jaynaiphone

  Hello I want to use Paypal in my iphone application, I have find the soapRequest to integrating the paypal API. My code is NSString *soapMessage = [NSString stringWithFormat: @"<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n" "<SOAP-ENV:Envelope xmlns:xsi= \"http://www.w3.org/2001/XMLSchema-instance\" xmlns:SOAP-ENC=\"http://schemas.xmlsoap.org/soap/encoding/\" xmlns:SOAP-ENV=\"http://schemas.xmlsoap.org/soap/envelope/\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" SOAP-ENV:encodingStyle=\"http://schemas.xmlsoap.org/soap/encoding/\">\n" "<SOAP-ENV:Header>\n" "<RequesterCredentials xmlns=\"urn:ebay:api:PayPalAPI\">\n" "<Credentials xmlns=\"urn:ebay:apis:eBLBaseComponents\">\n" "<Username>api_username</Username>\n" "<Password>api_password</Password>\n" "<Signature/>\n" "<Subject/>\n" "</Credentials>\n" "</RequesterCredentials>\n" "</SOAP-ENV:Header>\n" "<SOAP-ENV:Body>\n" "<specific_api_name_Req xmlns=\"urn:ebay:api:PayPalAPI\">\n" "<specific_api_name_Request>\n" "<Version xmlns=urn:ebay:apis:eBLBaseComponents”>service_version</Version>\n" "<required_or_optional_fields xsi:type=”some_type_here”>\n" "</required_or_optional_fields>\n" "</specific_api_name_Request>\n" "</specific_api_name_Req>\n" "</SOAP-ENV:Body>\n" "</SOAP-ENV:Envelope>\n"]; NSLog(@"Soap message===%@",soapMessage); NSString *parameterString = [NSString stringWithFormat:@"USER=%@&PWD=%@&SIGNATURE=%@&VERSION=57.0&METHOD=SetMobileCheckout&AMT=%.2f&CURRENCYCODE=USD&DESC=%@&RETURNURL=%@", userName, password, signature, donationAmount, @"Some Charge", returnCallURL]; NSLog(parameterString); NSURL *url = [NSURL URLWithString:paypalUrlNVP]; NSMutableURLRequest *theRequest = [NSMutableURLRequest requestWithURL:url]; NSString *msgLength = [NSString stringWithFormat:@"%d", [parameterString length]]; [theRequest addValue: msgLength forHTTPHeaderField:@"Content-Length"]; [theRequest setHTTPMethod:@"POST"]; [theRequest setHTTPBody: [parameterString dataUsingEncoding:NSUTF8StringEncoding]]; NSURLConnection *theConnection = [[NSURLConnection alloc] initWithRequest:theRequest delegate:self]; if( theConnection ){ webData = [[NSMutableData data] retain]; // [self displayConnectingView]; }else{ NSLog(@"theConnection is NULL"); } But here I am not getting the value of paypalUrlNVP. How can i get it?? And if possible then please give some example of paypalAPI integration in iphone. I also want to use checkout functionality.I am new in this field so I have no idea about it. So, kindly give me whole sample code. Thanks in advance.

  Read the article

• What IDE to use for Python

  - by husayt

  As a Python newbie, it is interesting to know what IDE's ("GUIs/editors") others use for Python coding. If you can just give the name (e.g. Textpad, Eclipse ..) that will be enough. If it is already mentioned, you can just vote for it. But if you can also give some more comparative information, that will be much appreciated. Thanks. Update: Results so far PyDev with Eclipse (CP, F, AC, PD, EM, SI, MLS, UML, SC, UT, LN, CF, BM) Komodo (CP, C/F, MLS, PD, AC, SC, SI, BM, LN, CF, CT) Emacs (CP, F, AC, MLS, PD, EM, SC, SI, BM, LN, CF, CT, UT, UML) Vim (CP, F, AC, MLS, SI, BM, LN, CF ) TextMate (Mac, CT, CF, MLS, SI, BM, LN) Gedit (Linux, F, AC, MLS, BM, LN, CT [sort of]) Idle (CP, F, AC) PIDA (Linux, CP, F, AC, MLS, SI, BM, LN, CF)(VIM Based) NotePad++ (Windows) BlueFish (Linux) JEdit (CP, F, BM, LN, CF, MLS) E-Texteditor (TextMate Clone for Windows) WingIde (CP, C, AC, MLS (support for C), PD, EM, SC, SI, BM, LN, CF, CT, UT) Eric Ide (CP, F, AC, PD, EM, SI, LN, CF, UT) Pyscripter (Windows, F, AC, PD, EM, SI, LN, CT, UT) ConTEXT (Windows, C) SPE (F, AC, UML) SciTE (CP, F, MLS, EM, BM, LN, CF, CT, SH) Zeus (W, C, BM, LN, CF, SI, SC, CT) NetBeans (CP, F, PD, UML, AC, MLS, SC, SI, BM, LN, CF, CT, UT, RAD) DABO (CP) BlackAdder (C, CP, CF, SI) PythonWin (W, F, AC, PD, SI, BM, CF) Geany (CP, F, very limited AC, MLS, SI, BM, LN, CF) UliPad (CP, F, AC, PD, MLS, SI, LI, CT, UT, BM) Boa Constructor (CP, F, AC, PD, EM, SI, BM, LN, UML, CF, CT) ScriptDev (W, C, AC, MLS, PD, EM, SI, BM, LN, CF, CT) Spider (CP, F, AC) Editra (CP, F, AC, MLS, SC, SI, BM, LN, CF) Pfaide (Windows, C, AC, MLS, SI, BM, LN, CF, CT) KDevelop (CP, F, MLS, SC, SI, BM, LN, CF) Acronyms used: CP - Cross Platfom C - Commercial F - Free AC - Automatic Code-completion MLS - Multi-Language Support PD - Integrated Python Debugging EM - ErrorMarkup SC - Source Control integration SI - Smart Indent BM - Bracket Matching LN - Line Numbering UML - UML editing / viewing CF - Code Folding CT - Code Templates UT - Unit Testing UID - Gui Designer (e.g. QT, Eric, ..) DB - integrated database support RAD - Rapid app development support I don't mention basics like Syntax highlighting as I expect these by default. This is a just dry list reflecting your feedback and comments, I am not advocating any of these tools. I will keep updating this list as you keep posting your answers. PS. Can you help me to add features of the above editors to the list (like autocomplete, debugging, or etc)?

  Read the article

• Disable Autocommit in H2 with Hibernate/C3P0 ?

  - by HDave

  I have a JPA/Hibernate application and am trying to get it to run against H2 (as well as other databases). Currently I am using Atomikos for transaction and C3P0 for connection pooing. Despite my best efforts I am still seeing this in the log file (and DAO integration tests are failing): [20100613 23:06:34] DEBUG [main] SessionFactoryImpl.(242) | instantiating session factory with properties: .....edited for brevity.... hibernate.connection.autocommit=true, ....more stuff follows The connection URL to H2 has AUTOCOMMIT=OFF, but according to the H2 documentation: this will not work as expected when using a connection pool (the connection pool manager will re-enable autocommit when returning the connection to the pool, so autocommit will only be disabled the first time the connection is used So I figured (apparently correctly) that Hibernate is where I'll have to indicate I want autocommit off. I found the autocommit property documented here and I put it in my EntityManagerFactory config as follows: <bean id="myappTestLocalEmf" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean"> <property name="persistenceUnitName" value="myapp-core" /> <property name="persistenceUnitPostProcessors"> <bean class="com.myapp.core.persist.util.JtaPersistenceUnitPostProcessor"> <property name="jtaDataSource" ref="myappPersistTestJdbcDataSource" /> </bean> </property> <property name="jpaVendorAdapter"> <bean class="org.springframework.orm.jpa.vendor.HibernateJpaVendorAdapter"> <property name="showSql" value="true" /> <property name="database" value="$DS{hibernate.database}" /> <property name="databasePlatform" value="$DS{hibernate.dialect}" /> </bean> </property> <property name="jpaProperties"> <props> <prop key="hibernate.transaction.factory_class">com.atomikos.icatch.jta.hibernate3.AtomikosJTATransactionFactory</prop> <prop key="hibernate.transaction.manager_lookup_class">com.atomikos.icatch.jta.hibernate3.TransactionManagerLookup</prop> <prop key="hibernate.connection.autocommit">false</prop> <prop key="hibernate.format_sql">true"</prop> <prop key="hibernate.use_sql_comments">true</prop> </property> </bean>

  Read the article

< Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >