Search Results

Search found 23220 results on 929 pages for 'default constraint'.

Page 497/929 | < Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504 | Next Page >

Connecting Windows XP to Windows 7 directly using cable

- by TPR

These are the problems I am encountering. XP can access Windows 7, not the other way around (which is fine, because I don't need it the other way currently) File transfer is too slow like 0.031 MB/s even though netperf and netCPS list around 8-9 MB/s. I disabled firewall on both computers. Both are same workgroup. I left homegroup on Windows 7. Windows 7 sees the connection as unidentified network. 10.1.1.2 (XP) and 10.1.1.1 (Windows 7) Subnet mask 255.255.255.0 Default gateway and DNS are empty for both of them. Both computer are connected to internet using wireless (using home network), and both of them are connected to each other using wire! If anybody has any pointers, do let me know. I have no problem doing such setup with both computers being Windows 7. This time one of them is XP though, and that seems to be the problem.

Read the article
Slower than expected 802.11n wireless network speeds

- by Ian

I have two ASUS laptops running Windows 7 connected wirelessly via 802.11n at 150 Mbit, as reported by Task Manager. The router is Netgear WNDR3700. When testing the wireless connection speed using iperf, I'm not getting nearly 150 Mbit: C:\>iperf -c 10.0.0.123 -t 30 ------------------------------------------------------------ Client connecting to 10.0.0.123, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 10.0.0.116 port 53819 connected with 10.0.0.123 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-30.0 sec 41.2 MBytes 11.5 Mbits/sec That's a typical result. Running parallel client threads does not increase the overall total speed. Why would I only be getting 11.5 Mbit on a 150 Mbit connection?

Read the article
What Can Super Mario Teach Us About Graphics Technology?

- by Eric Z Goodnight

If you ever played Super Mario Brothers or Mario Galaxy, you probably thought it was only a fun videogame—but fun can be serious. Super Mario has lessons to teach you might not expect about graphics and the concepts behind them. The basics of image technology (and then some) can all be explained with a little help from everybody’s favorite little plumber. So read on to see what we can learn from Mario about pixels, polygons, computers and math, as well as dispelling a common misconception about those blocky old graphics we remember from when me first met Mario. Latest Features How-To Geek ETC What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Seas0nPass Now Offers Untethered Apple TV Jailbreaking Never Call Me at Work [Humorous Star Wars Video] Add an Image Properties Listing to the Context Menu in Chrome and Iron Add an Easy to View Notification Badge to Tabs in Firefox SpellBook Parks Bookmarklets in Chrome’s Context Menu Drag2Up Brings Multi-Source Drag and Drop Uploading to Firefox

Read the article
Failed pinging a LAN card of the server from the client using shared internet connection

- by bobo

The server (Windows XP Pro SP3) has two LAN cards (LAN card A and B) and is connected to the internet using ADSL. The ADSL connection is shared to LAN card B using Internet Connection Sharing. The client (Windows XP Pro SP3) has one LAN card, and is connected to LAN card B of the server so that it has access to the internet. The IP address on the LAN cards are defined as follows: Server: LAN card A: 192.168.0.3/24 (manually defined by me) LAN card B: 192.168.0.1/24 (manually defined by Internet Connection Sharing) Client: LAN card: 192.168.0.123/24 (assigned by DHCP) Default gateway: 192.168.0.1 From the server, I can ping 192.168.0.123 successfully. From the client, it can access the internet without any problem. I can also ping 192.168.0.1 successfully but for 192.168.0.3, it failed with the Request Timeout error message. Why did the ping fail, and what should be done to make the ping possible? (all firewalls have been turned off.)

Read the article
What are the consequences of giving an AD domain differing NetBIOS and DNS names?

- by Newt

In the past, when creating AD domains, I've used the common convention of using a sub-domain of the company's publicly registered domain name, e.g "corp.mycompany.com" or "int.mycompany.com". I've always accepted the default NetBIOS name when running DCPromo, for fear that creating a NetBIOS name that differs from the sub-domain may cause complications. I've recently been doing a bit of research on the consequences of providing an alternate NetBIOS name. The main reasons behind this are: The NetBIOS name isn't particularly descriptive or unique to the company Apparently generic NetBIOS names such as "CORP" or "INT" can cause issues when merging IT systems (although I've not had experience with this myself) Providing something "before the slash" that means more to users (less important) In looking at the possible downsides, the only one I can come up with is the disjointed namespace issue when configuring Exchange. Can anybody with more experience than I elaborate on my findings at all? Many thanks

Read the article
What's the simplest configuration of SVN on a Windows Server to avoid plain text password storage?

- by detly

I have an SVN 1.6 server running on a Windows Server 2003 machine, served via CollabNet's svnserve running as a service (using the svn protocol). I would like to avoid storing passwords in plain text on the server. Unfortunately, the default configuration and SASL with DIGEST-MD5 both require plain text password storage. What is the simplest possible way to avoid storing passwords in plain text? My constraints are: Path-based access control to the SVN repository needs to be possible (currently I can use an authz file). As far as I know, this is more-or-less independent of the authentication method. Active directory is available, but it's not just domain-connected windows machines that need to authenticate: workgroup PCs, Linux PCs and software that uses PySVN to perform SVN operations all need to be able to access the repositories. Upgrading the SVN server is feasible, as is installing additional software.

Read the article
setting visual bell to flash in iTerm

- by blackwing

Hi, I am using iTerm on OSX (leopard) to ssh to a linux machine. I run screen on the dev machine to save my work between sessions. I am not a big fan of audio bell and I don't like screen's default 'Wuff Wuff' bell (or any other little message shown at bottom of the page). What I like though is to have flash (foreground and blackground colors swapped for a fraction of a second) as my visual bell. I used to use PuTTY and it is as simple as ticking a checkbox but I can't find such an option in iTerm. My question is how can I set my visual bell to flash? The ideal answer would work with iTerm on local computer, iTerm sshed to a linux server, and iTerm sshed to a linux server and ran screen.

Read the article
automatic IIS worker process recycle fails

- by Sander Rijken

The server is set to its default configuration to recycle the app pool every 1740 minutes. When this happens the following message is logged: A worker process with process id of '1234' serving application pool 'XX' has requested a recycle because the worker process reached its allowed processing time limit. Directly after logging this message, the web site is unresponsive. The only way to get it back online is by running iisreset manually. Does anyone know a fix for this behavior, other than turning the recycle feature off? Is it a known problem?

Read the article
Changing memory allocator to Jemalloc Centos 6

- by Brian Lovett

After reading this blog post about the impact of memory allocators like jemalloc on highly threaded applications, I wanted to test things on a larger scale on some of our cluster of servers. We run sphinx, and apache using threads, and on 24 core machines. Installing jemalloc was simple enough. We are running Centos 6, so yum install jemalloc jemalloc-devel did the trick. My question is, how do we change everything on the system over to using jemalloc instead of the default malloc built into Centos. Research pointed me at this as a potential option: LD_PRELOAD=$LD_PRELOAD:/usr/lib64/libjemalloc.so.1 Would this be sufficient to get everything using jemalloc?

Read the article
Magento hosting on a budget

- by spa

I have to do a setup for Magento. My constraint is primarily ease of setup and fault tolerance/fail over. Furthermore costs are an issue. I have three identical physical servers to get the job done. Each server node has an i7 quad core, 16GB RAM, and 2x3TB HD in a software RAID 1 configuration. Each node runs Ubuntu 12.04. right now. I have an additional IP address which can be routed to any of these nodes. The Magento shop has max. 1000 products, 50% of it are bundle products. I would estimate that max. 100 users are active at once. This leads me to the conclusion, that performance is not top priority here. My first setup idea One node (lb) runs nginx as a load balancer. The additional IP is used with domain name and routed to this node by default. Nginx distributes the load equally to the other two nodes (shop1, shop2). Shop1 and shop2 are configured equally: each server runs Apache2 and MySQL. The Mysqls are configured with master/slave replication. My failover strategy: Lb fails = Route IP to shop1 (MySQL master), continue. Shop1 fails = Lb will handle that automatically, promote MySQL slave on shop2 to master, reconfigure Magento to use shop2 for writes, continue. Shop2 fails = Lb will handle that automatically, continue. Is this a sane strategy? Has anyone done a similar setup with Magento? My second setup idea Another way to do it would be to use drbd for storing the MySQL data files on shop1 and shop2. I understand that in this scenario only one node/MySQL instance can be active and the other is used as hot standby. So in case shop1 fails, I would start up MySQL on shop2, route the IP to shop2, and continue. I like that as the MySQL setup is easier and the nodes can be configured 99% identical. So in this case the load balancer becomes useless and I have a spare server. My third setup idea The third way might be master-master replication of MySQL databases. However, in my optinion this might be tricky, as Magento isn't build for this scenario (e.g. conflicting ids for new rows). I would not do that until I have heard of a working example. Could you give me an advice which route to follow? There seems not one "good" way to do it. E.g. I read blog posts which describe a MySQL master/slave setup for Magento, but elsewhere I read, that data might get duplicated when the slave lags behind the master (e.g. when an order is placed, a customer might get created twice). I'm kind of lost here.

Read the article
Qmail does not forward mail to a specific domain

- by jahufar

Hi I have a dedicated hosting account with GoDaddy.com. I've pointed my domain's email to work with Google apps. The server has qmail running and it forwards email to all domains just fine except for MY domain (mydomain.com) - it says 550 User xxx not found in mydomain.com I believe it thinks I've hosted email on the server itself (not gmail) and it's trying to validate if [email protected] exists on my server (which is not the case since it's all handled by google apps). How do I make it forward mail to all domains? Thank you :) EDIT: I would only need it forwarding emails if the connection originates from 127.0.0.1 - which I believe is the default way it's configured. So to clarify: I just need a purely forwarded configuration so my PHP scripts have the ability to send email.

Read the article
How to get a Sun Ray to load a firmware from elsewhere

- by vdiozguy

I run a Sun Ray/VDI demo environment internally within the company - and because it's not a public service, I need to tell my Sun Rays to connect to it directly so that I don't get redirected to the corporate servers. To get any new Sun Ray to connect to *my* setup I usually pull out my laptop so that the Sun Ray can load the new version of the F/W along with the permission to pull up the management GUI via STOP-S.But there is a better way if you have another Sun Ray server handy:1) allow your Sun Ray to connect to the default corporate server2) log in to a "regular" session, that is a Solaris or Linux desktop on the Sun Ray server itself3) in a terminal, utswitch to your server (/opt/SUNWut/bin/utswitch -h myserver)4) again, login to a regular session there5) in a terminal, issue "/opt/SUNWut/lib/utload -S myserver -w"6) Watch your firmware load and wait7) the Sun Ray will reboot and connect to the first server again. Repeat steps 2-48) issue "/opt/SUNWut/lib/utload -S myserver -f SunRay.enableGUI"9) Press STOP-S and be merryNOTE: I'm sure there is even yet a better way - this is totally unsupported, most likely a figment of my imagination. In any case, this post will self-destruct in BOOM.

Read the article
Trouble installing Rabbit VCS for nautilus

- by Ranhiru Cooray

I am using Ubuntu 11.10 and following instructions mentioned here to install Rabbit VCS. I added the PPA properly, did a sudo apt-get update and ran sudo apt-get install rabbitvcs-core rabbitvcs-nautilus rabbitvcs-thunar rabbitvcs-gedit rabbitvcs-cli There were dependency issues and I googled a bit and found out that I need to install RabbitVCS only for nautilus as that is the default file manager for Ubuntu. So I ran the install commands separately for rabbitvcs-core, rabbitvcs-gedit and rabbitvcs-cli. Now my understanding is that those are installed properly. However when I run the install command for rabbitvcs-nautilus, I still get a dependency issue. ranhiru@ranhiru-HP-HDX16-NoteBook-PC:~$ sudo apt-get install rabbitvcs-nautilus Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: rabbitvcs-nautilus : Depends: nautilus (< 1:3.0~) but 1:3.2.1-0ubuntu2 is to be installed Depends: python-nautilus (< 1.0~) but 1.0-0ubuntu2 is to be installed E: Unable to correct problems, you have held broken packages. How do I solve this?

Read the article
Site-to-Site PPTP VPN connection between two Windows Server 2008 R2 servers

- by steve_eyre

We have two Windows Server 2008 R2 machines, one in our main office and one in a new office which we have just moved offsite. The main office has previously been handling client-to-server PPTP VPN connections. Now that we have moved our second server out of office, we want to set up a demand-dial or persistent VPN connection from the second server to the primary. Using a custom setting RRAS profile, we have successfully managed to set up a site-to-site VPN connection so that from the second server itself, it can access any of the devices in the main office and communicate back. However, any connected machines in the second office cannot use this connection, even when using the second server as gateway. The demand-dial interface is setup from the Second Server dialing into Main Server and a static route set up on RRAS for 192.168.0.0 with subnet mask 255.255.0.0 pointing down this network interface. The main office has the network of 192.168.0.0/16 (subnet mask 255.255.0.0). The second office has the network of 172.16.100.0/24 (subnet mask 255.255.255.0). What steps do we need to take to ensure traffic from the second office PCs going towards 192.168.x.x addresses use the VPN route? Many Thanks in advance for any help the community can offer. Debug Information Here is the route print output from the second server: =========================================================================== Interface List 23...........................Main Office 22...........................RAS (Dial In) Interface 16...e0 db 55 12 fa 02 ......Local Area Connection - Virtual Network 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 24...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.222 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 <MAIN OFFICE IP> 255.255.255.255 172.16.100.250 172.16.100.222 6 172.16.100.0 255.255.255.0 On-link 172.16.100.222 261 172.16.100.113 255.255.255.255 On-link 172.16.100.113 306 172.16.100.222 255.255.255.255 On-link 172.16.100.222 261 172.16.100.223 255.255.255.255 On-link 172.16.100.222 261 172.16.100.224 255.255.255.255 On-link 172.16.100.222 261 172.16.100.225 255.255.255.255 On-link 172.16.100.222 261 172.16.100.226 255.255.255.255 On-link 172.16.100.222 261 172.16.100.227 255.255.255.255 On-link 172.16.100.222 261 172.16.100.228 255.255.255.255 On-link 172.16.100.222 261 172.16.100.229 255.255.255.255 On-link 172.16.100.222 261 172.16.100.230 255.255.255.255 On-link 172.16.100.222 261 172.16.100.255 255.255.255.255 On-link 172.16.100.222 261 192.168.0.0 255.255.0.0 192.168.101.87 192.168.101.17 266 192.168.101.17 255.255.255.255 On-link 192.168.101.17 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.222 261 224.0.0.0 240.0.0.0 On-link 172.16.100.113 306 224.0.0.0 240.0.0.0 On-link 192.168.101.17 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.222 261 255.255.255.255 255.255.255.255 On-link 172.16.100.113 306 255.255.255.255 255.255.255.255 On-link 192.168.101.17 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.200 Default 0.0.0.0 0.0.0.0 172.16.100.250 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 16 261 fe80::/64 On-link 16 261 fe80::edf4:85c6:3c15:dcbe/128 On-link 1 306 ff00::/8 On-link 16 261 ff00::/8 On-link 22 306 ff00::/8 On-link =========================================================================== Persistent Routes: None And here is the route print from one of the second office PCs: =========================================================================== Interface List 11...10 78 d2 32 53 27 ......Atheros AR8151 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.103 10 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.100.0 255.255.255.0 On-link 172.16.100.103 266 172.16.100.103 255.255.255.255 On-link 172.16.100.103 266 172.16.100.255 255.255.255.255 On-link 172.16.100.103 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.103 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.103 266 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 11 266 fe80::/64 On-link 11 266 fe80::e973:de17:a045:aa78/128 On-link 1 306 ff00::/8 On-link 11 266 ff00::/8 On-link =========================================================================== Persistent Routes: None

Read the article
Wine / PlayOnLinux dependency issues when trying to install

- by Glutanimate

I am curious as to why installing PlayOnLinux entails removing seemingly unrelated packages like google-earth-stable. Is this the expected behaviour? This is the output I get when trying to install playonlinux through apt-get: The following packages were automatically installed and are no longer required: python-scour pax ncurses-term Use 'apt-get autoremove' to remove them. The following extra packages will be installed: binfmt-support fonts-horai-umefont fonts-unfonts-core libcapi20-3 libgif4:i386 libmpg123-0 libodbc1 libpam-winbind ttf-umefont ttf-unfonts-core unixodbc winbind wine wine-gecko1.4 wine-gecko1.4:i386 wine1.4 wine1.4-amd64 wine1.4-common wine1.4-i386:i386 winetricks Suggested packages: libmyodbc odbc-postgresql tdsodbc unixodbc-bin dosbox Recommended packages: gettext:i386 unixodbc:i386 The following packages will be REMOVED: alien cdbs debhelper dh-make dh-translations gettext google-earth-stable intltool intltool-debian lsb-core po-debconf The following NEW packages will be installed: binfmt-support fonts-horai-umefont fonts-unfonts-core libcapi20-3 libgif4:i386 libmpg123-0 libodbc1 libpam-winbind playonlinux ttf-umefont ttf-unfonts-core unixodbc winbind wine wine-gecko1.4 wine-gecko1.4:i386 wine1.4 wine1.4-amd64 wine1.4-common wine1.4-i386:i386 winetricks 0 upgraded, 21 newly installed, 11 to remove and 0 not upgraded. Need to get 145 MB of archives. After this operation, 275 MB of additional disk space will be used. This is the first time I am trying to install Wine / POL. I am using the default repositories, no Wine PPA or POL source added. These are all the PPAs I am using: How do I install POL / Wine without having to remove all these packages?

Read the article
How to format DVD-RAM?

- by AndrejaKo

I have few DVD-RAM disks and when using udftools, specifically sudo mkudffs --media-type=dvdram /dev/sr0 where /dev/sr0 is my DVD-RAM drive, I get trying to change type of multiple extents and nothing happens. What should I do? EDIT After trying with dvd+tools, here's what I got: #dvd+rw-format /dev/dvd -format=full -ssa=default * BD/DVD±RW/-RAM format utility by <[email protected]>, version 7.1. * 4.6GB DVD-RAM media detected. * formatting 54.8| And same error as before from mkudffs.

Read the article
Redhat Kernel patching advice

- by AndyM

An audit has pointed out that a RHEL server I manage has not had the latest kernel patches applied. I'm confused about kernel patching and within RHEL in relation to RHEL dot releases i.e 5.2 , 5.3 ,5.4 ..... Can someone answer these questions ? If I want to stay at a dot release of RHEL, say 5.4, can apply just updates to the 5.4 kernel or will applying kernel updates bring the server to a later dot release by default? The reason for this question is that I have applications that are only supported on say RHEL5.4 and going to a more recent dot release of RHEL 5 would break the support. I have some HP psp hba drivers compiled against the currently installed kernel, will applying a kernel update break these drivers as they were complied against the orginal kernel ? Anything else I need to look out for with regards to kernel patching ?

Read the article
How do I get nginx to issue 301 requests to HTTPS location, when SSL handled by a load-balancer?

- by growse

I've noticed that there's functionality enabled in nginx by default, whereby a url request without a trailing slash for a directory which exists in the filesystem automatically has a slash added through a 301 redirect. E.g. if the directory css exists within my root, then requesting http://example.com/css will result in a 301 to http://example.com/css/. However, I have another site where the SSL is offloaded by a load-balancer. In this case, when I request https://example.com/css, nginx issues a 301 redirect to http://example.com/css/, despite the fact that the HTTP_X_FORWARDED_PROTO header is set to https by the load balancer. Is this an nginx bug? Or a config setting I've missed somewhere?

Read the article
Innodb : cannot allocate the memory for the buffer pool

- by mingyeow

My innodb keeps crashing. This is the error message below. Does anyone know why this keeps happening? InnoDB: by InnoDB 49201616 bytes. Operating system errno: 12 InnoDB: Check if you should increase the swap file or InnoDB: ulimits of your operating system. InnoDB: On FreeBSD check you have compiled the OS with InnoDB: a big enough maximum process size. InnoDB: Note that in most 32-bit computers the process InnoDB: memory space is limited to 2 GB or 4 GB. InnoDB: We keep retrying the allocation for 60 seconds... 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in /usr/bin/mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! InnoDB: Fatal error: cannot allocate the memory for the buffer pool [ERROR] Default storage engine (InnoDB) is not available

Read the article
Unit testing ASP.NET Web API controllers that rely on the UrlHelper

- by cibrax

UrlHelper is the class you can use in ASP.NET Web API to automatically infer links from the routing table without hardcoding anything. For example, the following code uses the helper to infer the location url for a new resource,public HttpResponseMessage Post(User model) { var response = Request.CreateResponse(HttpStatusCode.Created, user); var link = Url.Link("DefaultApi", new { id = id, controller = "Users" }); response.Headers.Location = new Uri(link); return response; } That code uses a previously defined route “DefaultApi”, which you might configure in the HttpConfiguration object (This is the route generated by default when you create a new Web API project). The problem with UrlHelper is that it requires from some initialization code before you can invoking it from a unit test (for testing the Post method in this example). If you don’t initialize the HttpConfiguration and Request instances associated to the controller from the unit test, it will fail miserably. After digging into the ASP.NET Web API source code a little bit, I could figure out what the requirements for using the UrlHelper are. It relies on the routing table configuration, and a few properties you need to add to the HttpRequestMessage. The following code illustrates what’s needed,var controller = new UserController(); controller.Configuration = new HttpConfiguration(); var route = controller.Configuration.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); var routeData = new HttpRouteData(route, new HttpRouteValueDictionary { { "id", "1" }, { "controller", "Users" } } ); controller.Request = new HttpRequestMessage(HttpMethod.Post, "http://localhost:9091/"); controller.Request.Properties.Add(HttpPropertyKeys.HttpConfigurationKey, controller.Configuration); controller.Request.Properties.Add(HttpPropertyKeys.HttpRouteDataKey, routeData); The HttpRouteData instance should be initialized with the route values you will use in the controller method (“id” and “controller” in this example). Once you have correctly setup all those properties, you shouldn’t have any problem to use the UrlHelper. There is no need to mock anything else. Enjoy!!.

Read the article
Shoutcast admin panel not showing most of information

- by REALFREE

I recently start audio streaming broadcast through third party - they provide server to broadcast audio. But when I accessed Shoutcast admin panel on the server, there's not much information I can use, for example, what if I want to ban a particular ip address. Here's screen shot- And none of options did work (listeners, tail logfile, view logfile, reverse ip list.. ) does it mean that provider blocks all features on shoutcast admin panel by default? or something else.. I'd appreciate any advice. Thanks

Read the article
Ubuntu 12 Server messing up my hard disk

- by Jeroen Jacobs

I'm installing Ubuntu server on a disk with 12GB available. During the setup, I choose the default LVM-based partition layout. However for some reason, Ubuntu decides that it only wants to use 4GB of this disk. How do I reclaim the remaining space of the hard disk? "lvextent" doesn't work btw... output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 4.3G 3.4G 754M 82% / udev 3.9G 4.0K 3.9G 1% /dev tmpfs 1.6G 756K 1.6G 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 0 3.9G 0% /run/shm /dev/sda1 228M 25M 192M 12% /boot output of pvdisplay: --- Physical volume --- PV Name /dev/sda5 VG Name ubuntu PV Size 12.32 GiB / not usable 2.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 3154 Free PE 8 Allocated PE 3146 PV UUID dD06RZ-kGcL-1tTX-Ruds-XIDG-ssMd-FIUkzZ my partitions: Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 26343423 12920833 5 Extended /dev/sda5 501760 26343423 12920832 8e Linux LVM when I try lvextent, it says there is not enough diskspace.

Read the article
Windows server 2008 R2 IIS7 file permissions

- by StealthRT

Hey all i am trying to figure out why i can not access a index.php file from within the wwwroot/mollify/backend directory. It keeps coming up with this: Server Error 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied. I've given all the permissions (Full control) to the wwwroot directory i could think of (IUSR, Guest, GUESTS, IIS_IUSRS, Users, Administrators, NETWORK, NETWORK SERVICE, SYSTEM, CREATOR OWNER & Everyone). I also added index.php to the "Default Document" under my website settings in IIS 7 manager. What else am i missing? Thanks! David

Read the article
Screen lock broken when using separate x screens

- by Wolf

For some reason, the screen lock appears to be broken when I use separate x screens (it works fine if I use twin view or just one monitor, though). If I wait for the screen to lock (or if I tell it to lock), it fades to black, showing only the mouse cursor. However, when I move the mouse to bring up the password prompt, nothing happens, the screens remain completely blank. Furthermore, it would appear that the screen lock never activated in the first place, for two reasons: one, if I blindly enter my password and press enter, nothing happens; and two, if I press ctrl+alt+delete and then enter it logs me out (which shouldn't happen if the password prompt is there, right), losing any progress I have on any of the open programs (meaning, not a very friendly option for a programmer ;) ). So yeah, does anyone know why this is happening, and how to fix it? Thanks! Notes: I am using Ubuntu 11.10 64 bit. I am using gnome-classic, but the same problem occurs when I use unity. I do not have xscreensaver, nor do I have any screen savers running (except, I guess for the default blank one).

Read the article
DNS server failure when forwarding

- by Abraham Katz

I run Bind 9 on a Ubuntu 12.04 server. I want this server to be a sort of a "wrapper" over my default server, so that it will respond to "domain_name.My_TLD" itself and forward requests to any other request. The server resides in a domain (Disconnected from the internet), so I configured it to zone "company_domain."{ type forward; forwarders { 1.2.3.4 }; #the DC's ip }; When i query it about sommething.company_domain. it sends a query to the DC and gets a response, but it returns "server failure". What can cause that? Cheers, Abraham

Read the article

< Previous Page | 493 494 495 496 497 498 499 500 501 502 503 504 | Next Page >