Search Results

Search found 1812 results on 73 pages for 'amd radeon'.

Page 5/73 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Radeon 68xx, 69xx cards and support for 10-bit color over displayport [closed]

    - by aCuria
    10-bit color, aka "Deep Color" is a scheme where 10 bits are used for each color channel. This makes for a 30 bit RGB implementation. IE: red: 10 bits green: 10 bits blue: 10 bits total: 30 bits For more information, please consult this link http://en.wikipedia.org/wiki/RGB_color_model#Beyond_truecolor:_deep_color Radeon 6000 series cards DO support deep color over HDMI, but HDMI also limits the output resolution to 1920x1200, which is not optimal. I want to know if Deep color is possible over display port with the HD6xxx series graphics cards.

    Read the article

  • Graphic driver for ATI Radeon Xpress 200M on Ubuntu 9.10

    - by tsubasa
    I have trouble finding the right driver for my graphic card on Ubuntu 9.10. My graphic card is ATI Radeon Xpress 200M. With Ubuntu default driver, I have had problems when doing some OpenGL graphics programming or when watching youtube, the graphics goes slower than the sounds. Could anybody help? Thanks very much.

    Read the article

  • Migrating XenServer VMs from Intel to AMD servers

    - by John Smith
    I need to replace my XenServer 6.1 resource pool hardware. I currently run Intel hardware and I have to move to AMD hardware (corporate politics and budget stuff, blah blah blah). I have downtime available so I can use cold migration - live migration is not required. I will also have the new hardware (AMD) alongside the old hardware (Intel). The XenServer docs say there may be problems exporting from one arch and importing to another "may not work" - http://docs.vmd.citrix.com/XenServer/6.1.0/1.0/en_gb/guest.html#importing_vms - but mentions nothing about simply turning off the VM on one arch and then powering it back on new arch. VMs are a mix of OS - some Windows, some Linux, multiple versions. Is this something that can be done with no problems, or are there problems I need to be aware of?

    Read the article

  • Third monitor with AMD cards WITHOUT Eyefinity

    - by Resorath
    I have two AMD Radeon HD 6870 video cards in CrossFireX configuration and I would like to add a third monitor. I understand to use "Eyefinity" you need to use an active mini displayport to DVI adapter. I am not interested in the benefits of "Eyefinity", I just want a third monitor with Windows extended desktop. Is it possible to use either the HDMI head on the first card or the DVI heads from the second card to get a third monitor running without "Eyefinity" and an active adapter?

    Read the article

  • About to smash my keyboard!! Ubuntu 13.1 issues with AMD driver & Audio

    - by DNex
    Let me preface with saying that this is my 2nd day on Linux. I really want to make it work but these issues are driving me up the wall! I've done exhaustive google searches but have not been able to figure anything out. I am on Ubuntu 13.10, my graphics card is AMD Radeon HD4200. My sound card is a realtek HDMI. I've tried downloading and installing both drivers but nothing works. Graphics card: When I run the .run file (from http://www2.ati.com/drivers/legacy/amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip) I get an error. I check the fglrx-install log and it says this: Check if system has the tools required for installation. fglrx installation requires that the system have kernel headers. /lib/modules/3.11.0-12-generic/build/include/linux/version.h cannot be found on this system. One or more tools required for installation cannot be found on the system. Install the required tools before installing the fglrx driver. Optionally, run the installer with --force option to install without the tools. Forcing install will disable AMD hardware acceleration and may make your system unstable. Not recommended. Audio: Since my first install I've had no audio. I've tried everything outlined in this site: http://itsfoss.com/fix-sound-ubuntu-1304-quick-tip/ to no avail. I've download the linux drivers from Realtek HDMI audio but have had no luck. Any help would be extremely appreciated.

    Read the article

  • Acer Aspire One 725 - missing graphic card driver for Radeon HD 6290?

    - by Melon
    Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

    Read the article

  • How to get bearable 2D and 3D performance on AMD Radeon HD 6950?

    - by l0b0
    I have had an AMD Radeon HD 6950 (i.e., Cayman series) for a couple years now, and I have tried a lot of combinations of drivers and settings with terrible results. I'm completely at a loss as to how to proceed. The open source driver has much better 2D performance, but it offloads all OpenGL rendering to the CPU. What I've tried so far: All the latest stable Ubuntu releases in the period, plus one Linux Mint release. All the latest stable AMD Catalyst Proprietary Display Drivers, and currently 13.1. The unofficial wiki installation instructions for every Ubuntu version and the semi-official Ubuntu instructions. All the tips and tweaks I could find for Minecraft (Optifine, reducing settings to minimum), VLC (postprocessing at minimum, rendering at native video size), Catalyst Control Center (flipped every lever in there) and X11 (some binary toggles I can no longer remember). Results: Typically 13-15 FPS in Minecraft, 30 max (100+ in Windows with the same driver version). Around 10 FPS in Team Fortress 2 using the official Steam client. Choppy video playback, in Flash and with VLC. CPU use goes through the roof when rendering video (150% for 1080p on YouTube in Chromium, 100% for 1080p H264 in VLC). glxgears shows 12.5 FPS when maximized. fgl_glxgears shows 10 FPS when maximized. Hardware details from lshw: Motherboard ASUS P6X58D-E CPU Intel Core i7 CPU 950 @ 3.07GHz (never overclocked; 64 bit) 6 GB RAM Video card product "Cayman PRO [Radeon HD 6950]", vendor "Hynix Semiconductor (Hyundai Electronics)" 2 x 1920x1200 monitors, both connected with HDMI. I feel I must be missing something absolutely fundamental here. Is there no accelerated support for anything on 64-bit architectures? Does a dual monitor completely mess up the driver? $ fglrxinfo display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: AMD Radeon HD 6900 Series OpenGL version string: 4.2.11995 Compatibility Profile Context $ glxinfo | grep 'direct rendering' direct rendering: Yes I am currently using the open source driver, with the following results: Full frame rate and low CPU load when playing 1080p video. Black screen (but music in the background) in Team Fortress 2. Similar performance in Minecraft as the Catalyst driver. In hindsight obvious, since both end up offloading the rendering to the CPU. My /var/log/Xorg.0.log after upgrading to AMD Catalyst 13.1. Some possibly important lines: (WW) Falling back to old probe method for fglrx (WW) fglrx: No matching Device section for instance (BusID PCI:0@3:0:1) found The generated xorg.conf. The disabled "monitor" 0-DFP9 is actually an A/V receiver, which sometimes confuses the monitor drivers when turned on/off (but not in Windows). All three "monitor" devices are connected with HDMI. Edit: Chris Carter's suggestion to use the xorg-edgers PPA (Catalyst 13.1) resulted in some improvement, but still pretty bad performance overall: Minecraft stabilizes at 13-17 FPS, but at least the CPU load is "only" at 45-60%. Still 150% CPU use for 1080p video rendering on YouTube in Chromium. Massive improvement for 1080p H264 in VLC: 40-50% CPU use and no visible jitter glxgears performance about doubled to 25-30 FPS when maximized. fgl_glxgears still at ~10 FPS when maximized.

    Read the article

  • Windows 8 Radeon update broke some games

    - by Andrew
    I've been using Windows 8 Consumer Preview 32-bit on my desktop for months, and recently did a software update through Windows Update. An update for my Radeon HD 5450 driver (Catalyst) to WDDM 1.2 was in the list of updates, and installed. When I went to play CS:GO and discovered that when loaded, it would not display the GUI (menus, sometimes even the background) after a few seconds of flickering GUI. I can still navigate the menus 'by feel' and connect to and play on servers, but have no GUI, no buy menu, no map, no cross-hairs, no health indicator, etc. I have tried CS:S, which works, and Borderlands, which doesn't even load the intro videos before the first menu screen. I've tried re-installing Catalyst from the AMD website, and the beta, and tried uninstalling and reinstalling CS:GO. The problem with it (and Borderlands) still happen. What broke, and how can I fix it? I'll be reinstalling soon anyway to dump Windows 8 back to 7, but would like to be able to game until then.

    Read the article

  • Radeon hd 6570 black screen

    - by Sho
    I got some problem with new graphic card. Every time I use AMD Catalyst drivers on Windows or Linux, screen repeatedly goes black. This usually shows u when i open new cards in a browser, resize a window or run a program. Card runs smoothly on basic drivers but this means low resolution. 1940x1080 is native for my monitor so it causes a lot of problems. I've got a 600W Deus G1, so the power is not the problem. Maybe its a silly question, but would going form a vga cable to hdmi help to improve this situation? If not, can it be caused by slow processor or old mainboard? Im getting kinda confused about this whole thing...

    Read the article

  • ATI Radeon Triple Monitor Setup

    - by Zak
    I have a Dell XPS 8300, and its got an ATI Radeon HD6450 installed. When running Ubuntu 12.04 the triple monitors work flawlessly. I can change the default, turn them on/off etc ... The problem is Windows 7. It is behaving much like in this thread. I know the card supports three, as it WORKS PERFECTLY in the linux portion of my dual boot. Windows can "see" all three, but will only allow two. Is this a WIndows 7 / ATI compatibility issue, or is Windows 7 just stupid (rhetorical)? Had I not had a dual boot Linux box, I might have read the above thread and thought "damn, it just won't work". But I use three monitors every day on this card, so I know it works.... Just not with Windows.

    Read the article

  • ATI Radeon HD 5770 Cooling

    - by Murtez
    I have a Radeon HD 5770 manufactured by ATI. In the course of using compressed air to clean it the fan shattered. I put a case fan on the card to cool it, but it's not doing a great job; the temperature goes to nearly 100 sometimes. The card is not overclocked or anything, the PC itself is clean. I looked around for a third party cooling system but the only one I found was the Accelero L2 Pro. It's low on stock and I don't know how great it will be, some review say it may not fit on all 5770 cards. Does anyone know of another one that will work? Help is much appreciated.

    Read the article

  • ATI Radeon HD 5970 Display numbering issues

    - by Arindam Sen
    I have 2 computers on which i have ATI Radeon HD 5970 graphics card installed. There is 1 VGA out and 1 DVI out in it. When I connect my VGA out to a monitor on my 1st computer, it shows it as display 1 and when I connect my DVI out to a monitor it show it as display 2 (I am using extended display). When I do the same thing on my 2nd computer it shows just the opposite. The VGA out shows as display 2 and the DVI out shows as display 1. Is it a problem with the drivers or the hardware? (because the graphics card on both is exactly the same)

    Read the article

  • Display with intel integrated graphics, bitcoin mine with Radeon 6950

    - by karategeek6
    I'm on Ubuntu Linux 11.04 64 bit. I have an intel i5 with integrated graphics and a Radeon 6950, with one monitor. I would like to run my graphics on the integrated card, and run bitcoin mining on the 6950. I have bitcoin mining working when I use the 6950 for both display and mining. Every time I try and and use the integrated graphics instead, OpenCL doesn't recognize my 6950. Using aticonfig --initial when using the integrated graphics for display breaks things. So I used the xorg.conf it created as a basis and tried to manually edit it. I really don't know what I'm doing, though. My last attempt is given below. The graphics ran off the integrated card, but the 6950 wasn't recognized. Any help would be greatly appreciated! xorg.conf: #Section "ServerLayout" # Identifier "Intel Layout" # Screen "Default Screen" # Identifier "aticonfig Layout" # Screen "aticonfig-Screen[0]-0" # Screen 0 "aticonfig-Screen[0]-0" 0 0 #EndSection Section "Module" Load "glx" EndSection # Intel Section "Device" Identifier "Intel Integrated Graphics" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "Default Monitor" Option "VendorName" "Monitor Vendor" Option "ModelName" "Monitor Name" Option "DPMS" "true" EndSection Section "Screen" Identifier "Default Screen" Device "Intel Integrated Graphics" Monitor "Default Monitor" DefaultDepth 24 EndSection # ATI Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • How do I know if I have KMS enabled?

    - by Attila Oláh
    How can I check if KMS is enabled in my kernel? I've compiled mine with KMS radeon modeset defaulting to 1, but I still suspect that it is not enabled. EDIT: aatiis@aiur ~ $ dmesg | grep drm [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 [drm] Setting GART location based on new memory map [drm] Loading RS780 CP Microcode [drm] Resetting GPU [drm] writeback test succeeded in 1 usecs EDIT 2: aatiis@aiur ~ $ glxinfo | grep render IRQ's not enabled, falling back to busy waits: 2 0 direct rendering: Yes OpenGL renderer string: Mesa DRI R600 (RS780 9612) 20090101 TCL aatiis@aiur ~ $ sudo grep -i kms /var/log/Xorg.0.log [ 57.201] (II) [KMS] drm report modesetting isn't supported.

    Read the article

  • Radeon HD4850 serious issues when using DirectX 10

    - by ricsmania
    Hello, I have a problem with my video card. Whenever I run a DirectX 10 game, it works for a few seconds (10 or so) and then starts displaying nothing but big polygons. I have tested this with Crysis and Resident Evil 5, both have the same problems. The same games running under DirectX 9 work fine, except for some small black squares once in a while. I have the following specs: Asus P7P55D LE Intel Core i5 750 Sapphire Radeon HD4850 1GB 2x2GB Patriot Viper II Sector 5, DDR3 1600 MHz OCZ Stealth X Stream 500SXS 500W At first I thought it could be the video card overheating (it has stock cooling), but the game crashes even when it's running at 50 degrees C, and it's never been higher than 70. I also thought it could be the PSU, but as far as I know 500W is enough for this computer, especially because I haven't overclocked anything. My OS is Windows 7 X64 and I am using Catalyst 10.10, but I have also tried many older versions with no success. I don't think there is a problem with the card itself, or else it wouldn't run DirectX 9 games I believe. I have spent many hours searching for a solution but I couldn't, so any help is appreciated. Thank you. EDIT: I did some further investigation about the problem, and it seems taspeotis was right, it might be related to memory. I slightly underclocked the memory from 993 to 965 MHz and the problem went away completely. Both the black squares using DirectX 9 and the weird polygons using DirectX 10. I was using RE DirectX 10 Benchmark, as it consistently crashed around the same point, and now I can play the full benchmark with no artifacts at all. Unfortunately, the underclock has an obvious hit in performance. Although it's not critical, it's definitely noticeable. So, if the video memory test software showed no erros, but the card needs an underclock to work, what might be the problem? Temperature? Voltage? By the way, I couldn't find what the default voltage for this card is. And what is a good software to try and increase it? I tried Ati Tray Tools but it has a bug that increases the clock speed dramatically whenever I change something in the Overclock tab, so I'm afraid it might fry my card. Worst case scenario, if I don't find I solution I will try to slightly increase the GPU clock to compensate for the memory clock. Thank you again.

    Read the article

  • Sun Fire V20z also with AMD Opteron 256?

    - by Dan
    Hi, I have a SUN Fire V20z with two Opteron 244, which I'd like to upgrade. The official datasheet says that it supports up to Opteron 252. I was wondering if it would also work with AMD Opteron 256, cause they have the same core voltage and socket? Thanks for helping.

    Read the article

  • Reinitialize GPU on RADEON HD 7970 under linux

    - by user1610662
    I have got a RADEON HD 7970 sapphire on Debian Squeeze. Since I often use it with running GPU codes, sometimes the performances highly decrease as I test it with "glxgears" tool (I get only 20 FPS in fullscreen). So I would like to be able to reinitialize the GPU without reboot the system. I know the "clinfo" tool which display the features of the graphics card. Is there a tool which allows to do this reinitialization ?

    Read the article

  • Intel hd or Mobility Radeon?

    - by Absolute0
    I have decided to get a new Dell Studio 15 laptop. They have an option of adding a "ATI Mobility Radeon™ HD 4570, 512MB" card for an extra $100 instead of the included "Intel HD Graphics" card. How do the two compare? The laptop comes with an Intel Core i3 processor, maybe the Intel graphics card would be more compatible with the processor since they're made by the same manufacturer? Thanks in advance!

    Read the article

  • AMD Catalyst 13.9 installation failure

    - by Simon Verbeke
    Earlier today I installed Windows 8.1, and when I wanted to go into Catalyst Control Center, I noticed some odd error of CCC not being able to display options. I then figured I needed a driver update, so I downloaded the latest drivers, version 13.9, and tried to install them. While it was trying to install the display drivers, I got a blue screen. Tried again and got the same. Then I used an uninstall tool from AMD to remove all traces of my old drivers and tried to install the new drivers. Again, a blue screen. This is all I could think of to try. Would anyone know some other things I can try? EDIT: thought I might want to include the log entry for the crash: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" /> <EventID Qualifiers="16384">1001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-10-19T20:59:25.000000000Z" /> <EventRecordID>26587</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>Simon-PC</Computer> <Security /> </System> - <EventData> <Data Name="param1">0x0000007e (0xffffffffc0000005, 0xfffff80002a86dca, 0xffffd00025f250e8, 0xffffd00025f248f0)</Data> <Data Name="param2">C:\WINDOWS\MEMORY.DMP</Data> <Data Name="param3">101913-8953-01</Data> </EventData> </Event> Another edit: As it turns out, the graphics card isn't showing up any more in the device manager. But as far as I can tell, it is still working (the fans are spinning and my screen is plugged into that graphics card). This is solved. it appears that my graphics card is now running with a default windows driver. I also tried the forced method mentioned here: AMD Graphics Drivers won't install properly . But I still get a BSOD. Third edit: Slight succes! Managed to install version 13.4. Everything appears to be working fine now. I think I'm just going to skip version 13.9.

    Read the article

  • modprobe amd-rng fails, No such device

    - by CrackerJack9
    When trying to install hw_random to a 2.6 kernel, modprobe returns a FATAL error "No such device" on both CentOS 5.7 and Fedora 15. Both are using the latest kernel, respectively. The .ko file exists, and config- contains CONFIG_RTC=y and CONFIG_CRYPTO_RNG=m Both servers are x86_64 AMD processors. The only google results are very old, often reference the kernel module 'hw_random' (which has been replaced with processor specific modules and don't offer much help. Has anyone been able to install hw_random? Am I missing a step while installing the module?

    Read the article

  • Freezing with black screen after booting OS with AMD Catalyst driver

    - by Oleg
    I have ATI Mobility Radeon HD 5470 on my HP laptop. A few weeks ago I was confused with a weird trouble in proprietary drivers for my graphics card. When I start X server (or just boot Windows) system sometimes totally hangs up with black screen. The most annoying thing is that issue appearing is absolutely random (2 success, 3 fails, 1 success, 7 fails, etc.). It appears both on Linux (Arch, Debian 7) and Windows XP. I've tried reinstalling OS, drivers, etc. I've also tried updating BIOS. Then boot was successful for the next few times and issue appeared again (probably it was just a coincidence, because another BIOS updates gave no results). I really don't know what to do. Any ideas?

    Read the article

  • ATI / AMD HIS HD 7870 Graphics card fan speed below 16% / 20% 26%

    - by Thorsten Niehues
    I bought a AMD / ATI HIS HD 7870 to replace my old HD 4870. I noticed that the fan speed does not scale with the temperature: The fan speed does not get below 28% (read from catalyst / automatic fan speed) If I manually change it in the catalyst to 20% then it has the same speed than 28% : about 900-1000 rpm. With HIS iTurbo i manually can change the fan speed below 20%. But I noticed that changing the fan speed below 16% results in 3200 rpm. This is really stupid and annoying since my PC is a ultra silent PC and all fans are running with about 500 rpm when the PC is idle (windows / musik movies, etc.) Is there any way to change the fan speed to a reasonable speed like 500 rpm by software or hardware adapters (I really don't like to put a poti between the 12V line)

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >