Search Results

Search found 22173 results on 887 pages for 'concerned client'.

Page 5/887 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • HTTP SSL VPN Client? (alternative to Cisco's AnyConnect VPN)

    - by Ian Boyd
    Is there any free HTTP SSL VPN clients around, one that can act as an alternative to Cisco's own HTTP SSL VPN client (called AnyConnect)? The Cisco AnyConnect client has acknowledged problems, with no forthcoming solutions. Which is why I'm hoping for an alternative. Note: I'm only talking about the HTTP SSL VPN Client, not the HTTP SSL VPN Server. (If it were up to me they wouldn't be using Cisco at all, but it's not up to me.) Note: OpenVPN is a client that talks to their servers once you sign up for their service. It's not a generic VPN client. Note: ShrewSoft VPN is a client that uses IPsec and pre-shared keys, and was a good replacement for Cisco's old client - but not the new AnyConnect SSL VPN client. Note: Windows 7's VPN client fails to negotiate when presented with an SSL VPN connection. Note: I am looking for Windows clients only.

    Read the article

  • VPN still working after rebooting without client - DrayTek client shows "No Connection"

    - by HeavenCore
    My home network is a simple router + pc's setup, nothing fancy - the router has DHCP enabled for 192.168.0.X (255.255.255.0) and my PC picks up the address 192.168.0.82. There are no devices on my local lan in the 192.168.1.x range. On my pc i have the DrayTek VPN client, and a company i do some work for has a DrayTek Vigor router. The VPN client establishes a VPN to that remote company using an IPSec Tunnel (PreShared Key - no encryption) Last night i shut down my pc with the VPN tunnel still connected, when i turned my computer on this morning i accidentally clicked an RDP shortcut to 192.168.1.2 (a host in the remote company) and to my amazement it connected?!? I checked and the DrayTek VPN client isnt running, and when i did run it, it clearly shows "Status: No connection". confused as to how my machine can still talk to this remote machine i tried a trace: C:\Users\HeavenCore>tracert 192.168.1.2 Tracing route to C4SERVERII [192.168.1.2] over a maximum of 30 hops: 1 * * * Request timed out. 2 * * * Request timed out. 3 * * * Request timed out. 4 * * * Request timed out. 5 * * * Request timed out. 6 * * * Request timed out. 7 * * * Request timed out. 8 * * * Request timed out. 9 * * * Request timed out. 10 * * * Request timed out. 11 * * * Request timed out. 12 15 ms 21 ms 32 ms C4SERVERII [192.168.1.2] Trace complete. No indication there as to how it's getting from my network to the remote host. with my network mask being 255.255.255.0 with ip 192.168.0.1 i dont even see how packets are routing to 192.168.1.1 - unless there was a static route in place, so i checked the route table: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.82 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.82 266 192.168.0.82 255.255.255.255 On-link 192.168.0.82 266 192.168.0.255 255.255.255.255 On-link 192.168.0.82 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.82 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.0.82 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.1 Default =========================================================================== As far as i can see, nothing indicating how my packets are getting to 192.168.1.2??? To confirm i was on a different subnet i did an ipconfig /all: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ether net Controller Physical Address. . . . . . . . . : 00-23-54-F3-4E-BA DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.82(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 208.67.222.222 NetBIOS over Tcpip. . . . . . . . : Enabled Yet straight after confirming my ip and subnet as above i can go ahead and ping the remote machine: C:\Users\HeavenCore>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.2: bytes=32 time=48ms TTL=127 Reply from 192.168.1.2: bytes=32 time=23ms TTL=127 Reply from 192.168.1.2: bytes=32 time=103ms TTL=127 Reply from 192.168.1.2: bytes=32 time=25ms TTL=127 Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 23ms, Maximum = 103ms, Average = 49ms Also, note on the ping how the times are 35ms ish, this clearly shows the pings are to the remote host and not something on my local lan (all stuff on my local lan pings in 0ms) - plus i verified the host was actually the host via RDP. My Question: Can an IPSec tunnel stay up some how after a reboot without use of the VPN client? (well, i can clearly see that it can) - where in windows is there visibility of this? how does my machine know where to route the packets? I appreciate any insights & thoughts!

    Read the article

  • Django Deploy trouble

    - by i-Malignus
    Well, i've walking around this for a couples of days now... I think is time to ask for some help, i think my installation is ok... Server OS: Centos 5 Python -v 2.6.5 Django -v (1, 1, 1, 'final', 0) my apache conf: <VirtualHost *:80> DocumentRoot /opt/workshop ServerName taller.antell.com.py WSGIScriptAlias / /opt/workshop/workshop.wsgi WSGIDaemonProcess taller.antell.com.py user=ignacio group=ignacio processes=2 threads=25 ErrorLog /opt/workshop/apache.error.log CustomLog /opt/workshop/apache.custom.log combined <Directory "/opt/workshop"> Options +ExecCGI +FollowSymLinks -Indexes -MultiViews AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> my mod_wsgi conf: import os import sys sys.path.append('/opt/workshop') os.environ['DJANGO_SETTINGS_MODULE'] = 'workshop.settings' os.environ['PYTHON_EGG_CACHE'] = '/tmp/.python-eggs' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler( ) the error that i'm getting on my apache error log is: [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] mod_wsgi (pid=11459): Exception occurred processing WSGI script '/opt/workshop/workshop.wsgi'. [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] Traceback (most recent call last): [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/handlers/wsgi.py", line 241, in __call__ [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] response = self.get_response(request) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/handlers/base.py", line 134, in get_response [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return self.handle_uncaught_exception(request, resolver, exc_info) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/handlers/base.py", line 154, in handle_uncaught_exception [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return debug.technical_500_response(request, *exc_info) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/views/debug.py", line 40, in technical_500_response [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] html = reporter.get_traceback_html() [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/views/debug.py", line 114, in get_traceback_html [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return t.render(c) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/__init__.py", line 178, in render [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return self.nodelist.render(context) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/__init__.py", line 779, in render [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] bits.append(self.render_node(node, context)) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/debug.py", line 81, in render_node [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] raise wrapped [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] TemplateSyntaxError: Caught an exception while rendering: No module named vehicles [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] Original Traceback (most recent call last): [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/debug.py", line 71, in render_node [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] result = node.render(context) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/debug.py", line 87, in render [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] output = force_unicode(self.filter_expression.resolve(context)) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/__init__.py", line 572, in resolve [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] new_obj = func(obj, *arg_vals) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/template/defaultfilters.py", line 687, in date [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return format(value, arg) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/dateformat.py", line 269, in format [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return df.format(format_string) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/dateformat.py", line 30, in format [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] pieces.append(force_unicode(getattr(self, piece)())) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/dateformat.py", line 175, in r [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return self.format('D, j M Y H:i:s O') [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/dateformat.py", line 30, in format [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] pieces.append(force_unicode(getattr(self, piece)())) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/encoding.py", line 71, in force_unicode [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] s = unicode(s) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/functional.py", line 201, in __unicode_cast [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return self.__func(*self.__args, **self.__kw) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/translation/__init__.py", line 62, in ugettext [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return real_ugettext(message) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/translation/trans_real.py", line 286, in ugettext [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return do_translate(message, 'ugettext') [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/translation/trans_real.py", line 276, in do_translate [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] _default = translation(settings.LANGUAGE_CODE) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/translation/trans_real.py", line 194, in translation [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] default_translation = _fetch(settings.LANGUAGE_CODE) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/translation/trans_real.py", line 180, in _fetch [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] app = import_module(appname) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/importlib.py", line 35, in import_module [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] __import__(name) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] ImportError: No module named vehicles [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] mod_wsgi (pid=11463): Exception occurred processing WSGI script '/opt/workshop/workshop.wsgi'. [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] Traceback (most recent call last): [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/handlers/wsgi.py", line 241, in __call__ [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] response = self.get_response(request) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/handlers/base.py", line 73, in get_response [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] response = middleware_method(request) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/middleware/common.py", line 56, in process_request [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] if (not _is_valid_path(request.path_info) and [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/middleware/common.py", line 142, in _is_valid_path [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] urlresolvers.resolve(path) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/urlresolvers.py", line 303, in resolve [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] return get_resolver(urlconf).resolve(path) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/urlresolvers.py", line 218, in resolve [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] sub_match = pattern.resolve(new_path) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/urlresolvers.py", line 216, in resolve [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] for pattern in self.url_patterns: [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/urlresolvers.py", line 245, in _get_url_patterns [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] patterns = getattr(self.urlconf_module, "urlpatterns", self.urlconf_module) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/core/urlresolvers.py", line 240, in _get_urlconf_module [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] self._urlconf_module = import_module(self.urlconf_name) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] File "/opt/python2.6/lib/python2.6/site-packages/django/utils/importlib.py", line 35, in import_module [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] __import__(name) [Wed Apr 21 15:17:48 2010] [error] [client 190.128.226.122] ImportError: No module named vehicles.urls Please give my a hand, i stuck... Obviously is a problem with my vehicle module (the only one in the app), another thing is that when i try: [root@localhost workshop]# python manage.py runserver 0:8000 The app runs perfectly, i think that the problem is something near the wsgi conf, something is not clicking.... Tks... Update: workshop dir looks like... [root@localhost workshop]# ls -l total 504 -rw-r--r-- 1 root root 22706 Apr 21 15:17 apache.custom.log -rw-r--r-- 1 root root 408141 Apr 21 15:17 apache.error.log -rw-r--r-- 1 root root 0 Apr 17 10:56 __init__.py -rw-r--r-- 1 root root 124 Apr 21 11:09 __init__.pyc -rw-r--r-- 1 root root 542 Apr 17 10:56 manage.py -rw-r--r-- 1 root root 3326 Apr 17 10:56 settings.py -rw-r--r-- 1 root root 2522 Apr 21 11:09 settings.pyc drw-r--r-- 4 root root 4096 Apr 17 10:56 templates -rw-r--r-- 1 root root 381 Apr 21 13:42 urls.py -rw-r--r-- 1 root root 398 Apr 21 13:00 urls.pyc drw-r--r-- 2 root root 4096 Apr 21 13:44 vehicles -rw-r--r-- 1 root root 38912 Apr 17 10:56 workshop.db -rw-r--r-- 1 root root 263 Apr 21 15:30 workshop.wsgi vehicles dir [root@localhost vehicles]# ls -l total 52 -rw-r--r-- 1 root root 390 Apr 17 10:56 admin.py -rw-r--r-- 1 root root 967 Apr 21 13:00 admin.pyc -rw-r--r-- 1 root root 732 Apr 17 10:56 forms.py -rw-r--r-- 1 root root 2086 Apr 21 13:00 forms.pyc -rw-r--r-- 1 root root 0 Apr 17 10:56 __init__.py -rw-r--r-- 1 root root 133 Apr 21 11:36 __init__.pyc -rw-r--r-- 1 root root 936 Apr 17 10:56 models.py -rw-r--r-- 1 root root 1827 Apr 21 11:36 models.pyc -rw-r--r-- 1 root root 514 Apr 17 10:56 tests.py -rw-r--r-- 1 root root 989 Apr 21 13:44 tests.pyc -rw-r--r-- 1 root root 1035 Apr 17 10:56 urls.py -rw-r--r-- 1 root root 1935 Apr 21 13:00 urls.pyc -rw-r--r-- 1 root root 3164 Apr 17 10:56 views.py -rw-r--r-- 1 root root 4081 Apr 21 13:00 views.pyc Update 2: this is my settings.py # Django settings for workshop project. DEBUG = True TEMPLATE_DEBUG = DEBUG ADMINS = ( ('Ignacio Rojas', '[email protected]'), ('Fabian Biedermann', '[email protected]'), ) MANAGERS = ADMINS DATABASE_ENGINE = 'sqlite3' DATABASE_NAME = '/opt/workshop/workshop.db' DATABASE_USER = '' DATABASE_PASSWORD = '' DATABASE_HOST = '' DATABASE_PORT = '' # Local time zone for this installation. Choices can be found here: # http://en.wikipedia.org/wiki/List_of_tz_zones_by_name # although not all choices may be available on all operating systems. # If running in a Windows environment this must be set to the same as your # system time zone. TIME_ZONE = 'America/Asuncion' # Language code for this installation. All choices can be found here: # http://www.i18nguy.com/unicode/language-identifiers.html LANGUAGE_CODE = 'es-py' SITE_ID = 1 # If you set this to False, Django will make some optimizations so as not # to load the internationalization machinery. USE_I18N = True # Absolute path to the directory that holds media. # Example: "/home/media/media.lawrence.com/" MEDIA_ROOT = '' # URL that handles the media served from MEDIA_ROOT. Make sure to use a # trailing slash if there is a path component (optional in other cases). # Examples: "http://media.lawrence.com", "http://example.com/media/" MEDIA_URL = '' # URL prefix for admin media -- CSS, JavaScript and images. Make sure to use a # trailing slash. # Examples: "http://foo.com/media/", "/media/". ADMIN_MEDIA_PREFIX = '/media/' # Make this unique, and don't share it with anybody. SECRET_KEY = '11y0_jb=+b4^nq@2-fo#g$-ihk5*v&d5-8hg_y0i@*9$w8jalp' MIDDLEWARE_CLASSES = ( 'django.middleware.common.CommonMiddleware', 'django.contrib.sessions.middleware.SessionMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', ) ROOT_URLCONF = 'workshop.urls' TEMPLATE_DIRS = ( # Put strings here, like "/home/html/django_templates" or "C:/www/django/templates". # Always use forward slashes, even on Windows. # Don't forget to use absolute paths, not relative paths. "/opt/workshop/templates" ) INSTALLED_APPS = ( 'django.contrib.admin', 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'workshop.vehicles', ) TEMPLATE_CONTEXT_PROCESSORS = ( 'django.core.context_processors.auth', 'django.core.context_processors.debug', 'django.core.context_processors.i18n', 'django.core.context_processors.media', )

    Read the article

  • Performance improvement of client server system

    - by Tanuj
    I have a legacy client server system where the server maintains a record of some data stored in a sqlite database. The data is related to monitoring access patterns of files stored on the server. The client application is basically a remote viewer of the data. When the client is launched, it connects to the server and gets the data from the server to display in a grid view. The data gets updated in real time on the server and the view in the client automatically gets refreshed. There are two problems with the current implementation: When the database gets too big, it takes a lot of time to load the client. What are the best ways to deal with this. One option is to maintain a cache at the client side. How to best implement a cache ? How can the server maintain a diff so that it only sends the diff during the refresh cycle. There can be multiple clients and each client needs to display the latest data available on the server. The server is a windows service daemon. Both the client and the server are implemented in C#

    Read the article

  • Client side prediction/simulation Question

    - by Legendre
    I found a related question but it doesn't have what I needed. Client A sends input to move at T0. Server receives input at T1. All clients receive the change at T2. Question: With client-side prediction, client A would start moving at T0, client-side. All other clients receive the change at T2, so to them, client A only started moving at T2. If I understand correctly, client B will always see client A's past position and not his current position? How do I sync both client B and client A?

    Read the article

  • Synergy, OSX client, Windows 7 server - No mouse on client

    - by Majenko
    I have the following Synergy setup: +------------++------------++------------++------------+ | Mac || Win 7 || Ubuntu 1 || Ubuntu 2 | |c ||s ||c ||c | +------------++------------++------------++------------+ Mac: OS/X Tiger 10.4.11 (G3) Win 7: Windows 7 Ultimate x64 Ubuntu 1 & Ubuntu 2: Desktop 10.10 Now, everything works nicely between the Win7 server and the two Ubuntu machines. What doesn't work is the Mac. I am running the very latest Synergy (1.4.2, downloaded last night). As far as the Mac is concerned everything should be working fine: Synergy 1.4.2 Client on Darwin 8.11.0 Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC Power Macintosh Unable to connect to pasteboard. Clipboard sharing disabled. 2011-03-22 09:32:56.725 synergyc[406] Can't register screen saver connection 'com.apple.ScreenSaverDaemon' started client connecting to '192.168.0.202': 192.168.0.202:24800 connected to server entering screen leaving screen entering screen leaving screen But it's just not interacting with the display at all (mouse doesn't move, keyboard does nothing). I have tried running ktrace on synergyc and examining the dump, and the only clue I found was that it was trying to interact with the AccessibilityAPI which was disabled at first. Enabling Accessibility has had no effect whatsoever (it has only stopped the failure to open /var/db/.AccessibilityAPIEnabled in the ktrace dump) Anyone managed to get this to work in OS/X Tiger yet? I used to run the server on OS/X and have the windows / unix machines as clients, but as my Windows is now a laptop I'd like that to be the server.

    Read the article

  • I am unable to run a client/server program in php

    - by sibi
    This is the program I am trying to run: $host = "127.0.0.1"; $port = 25003; // don't timeout! set_time_limit(0); // create socket $socket = socket_create(AF_INET, SOCK_STREAM, 0) or die("Could not create socket\n"); // bind socket to port $result = socket_bind($socket, $host, $port) or die("Could not bind to socket\n"); // start listening for connections $result = socket_listen($socket, 3) or die("Could not set up socket listener\n"); // accept incoming connections // spawn another socket to handle communication $spawn = socket_accept($socket) or die("Could not accept incoming connection\n"); // read client input $input = socket_read($spawn, 1024) or die("Could not read input\n"); // clean up input string $input = trim($input); echo "Client Message : ".$input; // reverse client input and send back $output = strrev($input) . "\n"; socket_write($spawn, $output, strlen ($output)) or die("Could not write output\n"); // close sockets socket_close($spawn); socket_close($socket); I enabled the PHP_socket option in WAMP but still I keep getting errors like unable to bind. Can someone please help me out?

    Read the article

  • How to use WPA2 client mode in the Linux-based Cisco WAP4410N access point

    - by joechip
    I have a Cisco WAP4410N access point that I want to use as a client to connect to a WPA2 wireless network (for WLAN service monitoring purposes). Supposedly this access point supports a "Wireless Client/Repeater" mode that allows to do this. The Repeater function is optional (I have that box unchecked so that nobody can connect to this access point wirelessly). I have verified through SSH that the access point gets configured as a client and not as a Master. But it never associates to the SSID I ask it to. This is what iwconfig shows: ath04 IEEE 802.11ng ESSID:"myownssid" Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:14 dBm Sensitivity=1/3 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/94 Signal level=161/162 Noise level=161/161 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Although I've never done this from the command line, I suppose I could use wpa_supplicant or wpa_client to associate it, but I don't know how to do that without editing configuration files and the filesystem is readonly. Besides, I would have to run those commands manually after every reboot. I'd like to know how to do this the Cisco way, if possible. If not, any trick to make this work would be useful. Edit: This is with the latest firmware, 2.0.4.2. And I found that not all of the filesystem is readonly, since /var and /tmp are mounted with type ramfs.

    Read the article

  • How to use Cisco AnyConnect VPN Client?

    - by ktm5124
    I wrote a related question earlier, which is still unresolved. This question is much more specific. So I installed Cisco AnyConnect VPN Client on Snow Leopard. I connect to my work VPN. Once connected, I can't ping my work machine. I don't see any computers on the network. If the client were not running, I wouldn't believe myself to be connected to the VPN. Is there something that I am doing wrong? Do I have to route my network traffic through the tunnel manually? (ifconfig route comes to mind) Is the POST request that I am about to submit going to go through the tunnel created by my VPN? I guess the main question is: why do I feel so in the dark? Cisco says I am connected to my VPN, but for all I know it is invisible. N.B. I do have the up-to-date Cisco VPN Client: version 2.3.2016. I installed it about a week ago.

    Read the article

  • tmux: Suddenly, cannot horizontally split

    - by A__A__0
    As root, using a reasonably default .profile and .shrc and an empty tmux.conf, I am unable to split the window horizontally. There are a number of cases to consider so I'll list them clearly. Using the keybinding + empty configuration: nothing happens Using the keybinding + my configuration: a bell is generated, nothing else; occasionally, the split will appear and disappear immediately (maybe it always does this, but I'm connecting over ssh so it may not make it through) Using tmux split-window -h with any config: tmux immediately exits I've posted here in order the server and client verbose logs generated by tmux -v during the third case: server started, pid 9523 socket path /tmp/tmux-0/default new client 7 got 100 from client 7 got 101 from client 7 got 102 from client 7 got 103 from client 7 got 104 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 106 from client 7 got 200 from client 7 cmdq 0x801c6e080: new-session (client 7) new term: xterm xterm override: XT xterm override: Ms ]52;%p1%s;%p2%s xterm override: Cs ]12;%p1%s xterm override: Cr ]112 xterm override: Ss [%p1%d q xterm override: Se [2 q new key Oo: 0x1021 (KP/) new key Oj: 0x1022 (KP*) new key Om: 0x1023 (KP-) new key Ow: 0x1024 (KP7) new key Ox: 0x1025 (KP8) new key Oy: 0x1026 (KP9) new key Ok: 0x1027 (KP+) new key Ot: 0x1028 (KP4) new key Ou: 0x1029 (KP5) new key Ov: 0x102a (KP6) new key Oq: 0x102b (KP1) new key Or: 0x102c (KP2) new key Os: 0x102d (KP3) new key OM: 0x102e (KPEnter) new key Op: 0x102f (KP0) new key On: 0x1030 (KP.) new key OA: 0x101d (Up) new key OB: 0x101e (Down) new key OC: 0x1020 (Right) new key OD: 0x101f (Left) new key [A: 0x101d (Up) new key [B: 0x101e (Down) new key [C: 0x1020 (Right) new key [D: 0x101f (Left) new key OH: 0x1018 (Home) new key OF: 0x1019 (End) new key [H: 0x1018 (Home) new key [F: 0x1019 (End) new key Oa: 0x501d (C-Up) new key Ob: 0x501e (C-Down) new key Oc: 0x5020 (C-Right) new key Od: 0x501f (C-Left) new key [a: 0x901d (S-Up) new key [b: 0x901e (S-Down) new key [c: 0x9020 (S-Right) new key [d: 0x901f (S-Left) new key [11^: 0x5002 (C-F1) new key [12^: 0x5003 (C-F2) new key [13^: 0x5004 (C-F3) new key [14^: 0x5005 (C-F4) new key [15^: 0x5006 (C-F5) new key [17^: 0x5007 (C-F6) new key [18^: 0x5008 (C-F7) new key [19^: 0x5009 (C-F8) new key [20^: 0x500a (C-F9) new key [21^: 0x500b (C-F10) new key [23^: 0x500c (C-F11) new key [24^: 0x500d (C-F12) new key [25^: 0x500e (C-F13) new key [26^: 0x500f (C-F14) new key [28^: 0x5010 (C-F15) new key [29^: 0x5011 (C-F16) new key [31^: 0x5012 (C-F17) new key [32^: 0x5013 (C-F18) new key [33^: 0x5014 (C-F19) new key [34^: 0x5015 (C-F20) new key [2^: 0x5016 (C-IC) new key [3^: 0x5017 (C-DC) new key [7^: 0x5018 (C-Home) new key [8^: 0x5019 (C-End) new key [6^: 0x501a (C-NPage) new key [5^: 0x501b (C-PPage) new key [11$: 0x9002 (S-F1) new key [12$: 0x9003 (S-F2) new key [13$: 0x9004 (S-F3) new key [14$: 0x9005 (S-F4) new key [15$: 0x9006 (S-F5) new key [17$: 0x9007 (S-F6) new key [18$: 0x9008 (S-F7) new key [19$: 0x9009 (S-F8) new key [20$: 0x900a (S-F9) new key [21$: 0x900b (S-F10) new key [23$: 0x900c (S-F11) new key [24$: 0x900d (S-F12) new key [25$: 0x900e (S-F13) new key [26$: 0x900f (S-F14) new key [28$: 0x9010 (S-F15) new key [29$: 0x9011 (S-F16) new key [31$: 0x9012 (S-F17) new key [32$: 0x9013 (S-F18) new key [33$: 0x9014 (S-F19) new key [34$: 0x9015 (S-F20) new key [2$: 0x9016 (S-IC) new key [3$: 0x9017 (S-DC) new key [7$: 0x9018 (S-Home) new key [8$: 0x9019 (S-End) new key [6$: 0x901a (S-NPage) new key [5$: 0x901b (S-PPage) new key [11@: 0xd002 (C-S-F1) new key [12@: 0xd003 (C-S-F2) new key [13@: 0xd004 (C-S-F3) new key [14@: 0xd005 (C-S-F4) new key [15@: 0xd006 (C-S-F5) new key [17@: 0xd007 (C-S-F6) new key [18@: 0xd008 (C-S-F7) new key [19@: 0xd009 (C-S-F8) new key [20@: 0xd00a (C-S-F9) new key [21@: 0xd00b (C-S-F10) new key [23@: 0xd00c (C-S-F11) new key [24@: 0xd00d (C-S-F12) new key [25@: 0xd00e (C-S-F13) new key [26@: 0xd00f (C-S-F14) new key [28@: 0xd010 (C-S-F15) new key [29@: 0xd011 (C-S-F16) new key [31@: 0xd012 (C-S-F17) new key [32@: 0xd013 (C-S-F18) new key [33@: 0xd014 (C-S-F19) new key [34@: 0xd015 (C-S-F20) new key [2@: 0xd016 (C-S-IC) new key [3@: 0xd017 (C-S-DC) new key [7@: 0xd018 (C-S-Home) new key [8@: 0xd019 (C-S-End) new key [6@: 0xd01a (C-S-NPage) new key [5@: 0xd01b (C-S-PPage) new key [I: 0x1031 ((null)) new key [O: 0x1032 ((null)) new key OP: 0x1002 (F1) new key OQ: 0x1003 (F2) new key OR: 0x1004 (F3) new key OS: 0x1005 (F4) new key [15~: 0x1006 (F5) new key [17~: 0x1007 (F6) new key [18~: 0x1008 (F7) new key [19~: 0x1009 (F8) new key [20~: 0x100a (F9) new key [21~: 0x100b (F10) new key [23~: 0x100c (F11) new key [24~: 0x100d (F12) new key [2~: 0x1016 (IC) new key [3~: 0x1017 (DC) replacing key OH: 0x1018 (Home) replacing key OF: 0x1019 (End) new key [6~: 0x101a (NPage) new key [5~: 0x101b (PPage) new key [Z: 0x101c (BTab) replacing key OA: 0x101d (Up) replacing key OB: 0x101e (Down) replacing key OD: 0x101f (Left) replacing key OC: 0x1020 (Right) spawn: /bin/sh -- session 0 created writing 207 to client 7 got 208 from client 7 input_parse: '#' ground input_parse: ' ' ground keys are 7 ([?1;2c) received service class 1 complete key [?1;2c 0xfff keys are 1 (t) complete key t 0x74 input_parse: 't' ground keys are 1 (m) complete key m 0x6d input_parse: 'm' ground keys are 1 (u) complete key u 0x75 input_parse: 'u' ground keys are 1 (x) complete key x 0x78 input_parse: 'x' ground keys are 1 ( ) complete key 0x20 input_parse: ' ' ground keys are 1 (s) complete key s 0x73 input_parse: 's' ground keys are 1 (p) complete key p 0x70 input_parse: 'p' ground keys are 1 (l) complete key l 0x6c input_parse: 'l' ground keys are 1 (i) complete key i 0x69 input_parse: 'i' ground keys are 1 (t) complete key t 0x74 input_parse: 't' ground keys are 1 (-) complete key - 0x2d input_parse: '-' ground keys are 1 (d) complete key d 0x64 input_parse: 'd' ground keys are 1 () complete key 0x7f input_parse: '' ground input_c0_dispatch: ' input_parse: '' ground input_parse: '[' esc_enter input_parse: 'K' csi_enter input_csi_dispatch: 'K' "" "" keys are 1 (w) complete key w 0x77 input_parse: 'w' ground keys are 1 (i) complete key i 0x69 input_parse: 'i' ground keys are 1 (n) complete key n 0x6e input_parse: 'n' ground keys are 1 (d) complete key d 0x64 input_parse: 'd' ground keys are 1 (o) complete key o 0x6f input_parse: 'o' ground keys are 1 (w) complete key w 0x77 input_parse: 'w' ground keys are 1 ( ) complete key 0x20 input_parse: ' ' ground keys are 1 (-) complete key - 0x2d input_parse: '-' ground keys are 1 (h) complete key h 0x68 input_parse: 'h' ground keys are 1 ( ) complete key 0xd input_parse: ' ' ground input_c0_dispatch: ' input_parse: ' ' ground input_c0_dispatch: ' new client 13 got 100 from client 13 got 101 from client 13 got 102 from client 13 got 103 from client 13 got 104 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 106 from client 13 got 200 from client 13 cmdq 0x801c6e160: split-window -h (client 13) spawn: /bin/sh -- writing 203 to client 13 input_parse: '#' ground input_parse: ' ' ground input_parse: '#' ground input_parse: ' ' ground lost client 13 session 0 destroyed writing 203 to client 7 got 205 from client 7 writing 204 to client 7 lost client 7 got 207 from server got 203 from server got 204 from server There are some other peculiarities: With a newly created user (from which I overwrote root's .profile and .shrc, tmux works perfectly. Occasionally (twice out of the 50 or so times I've tested it), the splitting will work fine once in a session. (This happened for example when I ran ktrace on tmux, which I can also post) To explain the 'suddenly' part of the title: when I started my newly updated mysql56-server, tmux immediately exited and lost the session. Recently I changed architectures, from FreeBSD 10.0 i386 to amd64, and I am still working through shared library incompatibilities. I suspect that this could be involved, but I can't imagine how an incompatibility of this sort could result in such a specific, isolated failure.

    Read the article

  • How do client-server cooperation based games like Diablo 3 work?

    - by edgar
    Diablo 3 cooperates with Blizzard servers even during single player games. In fact, Blizzard has had problems with the games "melting their servers." I would like to ask: How do the client and the server communicate? What details does the client leave to the server, and vice versa? What details are redundant - both the client and the server know - and how often do they disagree? The previous paragraph contains the important questions, but I have a few more that I must explain my motivation towards. I am interested in the programming of botting. Ethical botting - I don't plan on actually abusing the automation to run 24/7. I just find it to be a great programming challenge to glean information from a game, and then make decisions from that information. I am stuck in the starting gate. The unofficial questions from this post would be: How can I make a bot (language, tools, libraries)? Can I get information through the communication between client and server, rather than the brute force pixel detection easily used in more static games? There probably is a trust issue, and to that all I can say is that I promise not to abuse the answers. But please feel free to answer any of the questions you feel comfortable with. Thank you!

    Read the article

  • creating ports and initiating communication between client and server

    - by dave
    what i need is a server that listens to 5060 port , when the client sends data to that port the server should open up another port ( any port after 1250 i believe ) and forward the clients data to that port keeping 5060 idle so it can perform the same function for the next client so basically i need the server to a) open up multiple ports one for each client b) get the voice data from the client and be able to send voice data to that client i m looking into the hardware specs and other such details of the scenario so i dont have time to make such a program myself if theres a code that i can run directly ( both server and client side ) on visual studio .net 2010 that will perform these tasks then that would be extremely helpful thanks alot in advance

    Read the article

  • How to implement dual communication between server and client via http

    - by Alex Sebastiano
    I have a AJAX client which must receive messages from server. Some messages from server not like request-response type. For example, imaging game in which players can enter. Server must send to client info about player entering. But how can server send message to client via http without request from client? Only decision that i can invent: client send request to server (getNewPlayerEnter request) with big timeout, server checks state of player set, if in set new players are, then server send info to client, if not server 'sleeps' on some time, and after 'sleeping' server checks players set again. I think my desicion a little stupid(maybe not little). How implement it right? p.s. sorry for my english

    Read the article

  • Wyse Z Class Thin Client (WES7) Image Deployment

    - by nsr81
    We are currently working on deploying a few Wyse WES7 thin clients (Z Class, exact model escapes me at the moment). We have WDM setup, and are able to see new clients show up, interact with them, pull/push images. Our current workflow is something like this: Unpack & boot up the device Disable Windows Firewall, reboot Device shows up in WDM Publish our custom image to the new device. My question is whether or not there is a way I can bypass step 2, and put my image on the client right out of the box. Either using PXE or USB boot disk, such that I can boot into some sort of menu and tell the client to pull a particular image from the WDM server. With HP thin clients, we have a rule setup which detects new clients on the network and pushes our custom image to them first time they show up. I haven't been able to figure it out with Wyse.

    Read the article

  • Not able to connect to a mac client from a windows machine

    - by Manish
    I have a Server.exe file which I use to connect to a mac.(I am fairly confident that server.exe is not buggy ).When i try to do this I get this often cited error "No connection could be made because the target machine actively refused it " I did search some existing questions about this on the forum and it looked like this might be a firewall issue.FWIW I dont have any firewall set on my mac (client) and on my server machine (Windows 7 64 bit ) under the firewall settings I have :- Incoming connections : Block all connections to programs that are not on the list of allowed programs. Active Domain Networks: Same domain as the one which my client is on. Windows Firewire State: Off. Do you think i need to change something here?Can someone help me with next steps?

    Read the article

  • Alternate Client for Cisco Unified Personal Communicator protocol

    - by Jason M
    At work we have an in-house chat system using CUPC. Does anyone else out there use this? There are a few things I do not like about this client: Where's the chat log? If I close the window out, I have no way of getting my conversation back. Tabbed interface? That would be nice. I hate having multiple chat windows up, having to arrange them around my desktop as more people start talking to me. I don't like that I have to use this one-off application for this protocol when other chat clients will handle 99% of the other protocols I use. Tell me: Is the protcol an open standard for which other applications have support? (pidgin, adium, digsby, etc.) If not, can I overcome these issues from within CUPC? Perhaps there are newer versions of the client that overcome these issues.

    Read the article

  • FTP client that supports 2 concurrent FTP sessions

    - by oninea
    I'm looking for an FTP client that can connect to two different FTP servers at the same time and allow file transfer or synchronization between those two servers. Basically what I want to achieve is to transfer/synchronize files between 2 different sites from my local machine. Are there any clients around that support this functionality? If there are none, is there an alternative to achieve this? I've taken a look at net2ftp, a web based FTP client, which provides almost the same functionality that I need. What I'm looking for though is a desktop app. Any ideas?

    Read the article

  • Alternate Client for Cisco Unified Personal Communicator protocol

    - by Jason M
    At work we have an in-house chat system using CUPC. Does anyone else out there use this? There are a few things I do not like about this client: Where's the chat log? If I close the window, I have no way of getting my conversation back. Tabbed interface? That would be nice. I hate having multiple chat windows up, having to arrange them around my desktop as more people start talking to me. I don't like that I have to use this one-off application for particular this protocol when other chat clients will handle 99% of the other protocols I use. Tell me: Is the protocol an open standard for which other applications have support? (pidgin, adium, digsby, etc.) If not, can I overcome these issues from within CUPC? Perhaps there are newer versions of the client that overcome these issues.

    Read the article

  • How can I give my client "full access" to their PHP application's MySQL database?

    - by Micah Delane Bolen
    I am building a PHP application for a client and I'm seriously considering WordPress or a simple framework that will allow me to quickly build out features like forums, etc. However, the client is adamant about having "full access" to the database and the ability to "mine the data." Unfortunately, I'm almost certain they will be disappointed when they realize they won't be able to easily glean meaningful insight by looking at serialized fields in wp_usermeta, etc. One thought I had was to replicate a variation on the live database where I flatten out all of those ambiguous and/or serialized fields into something that is then parsable by a mere mortal using a tool as simple as phpMyAdmin. Unfortunately, the client is not going to settle for a simple backend dashboard where I create the custom reports for them even though I know that would be the easiest and most sane approach.

    Read the article

  • Benefits of using the same language for client and server?

    - by Makita
    I'm looking at architecture solutions for a mobile project that will have a web-service/app in addition to native apps. I've been looking at various libraries, frameworks, and stacks like jqm, backbone, parse, and meteor. Meteor, sort of an "open stack package framework", is tightly bound with node.js. There is a lot of talk about the benefits of using the same language both client and server side, and I'm not getting it. I could understand if you want to mirror the entire state of a web application on both client and server but struggling to find other wins... Workflow efficiency? I'm trying to understand why client/server language parity is considered to be a holy grail, any explicit examples or links would be greatly appreciated, thanks!

    Read the article

  • OpenVPN - client-to-client traffic working in one direction but not the other

    - by user42055
    I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ?

    Read the article

  • Plesk 9 - Client panel access via client domain, not server host name

    - by Ben
    I've setup a Plesk 9 vps recently. The plesk admin is accessible at, say, http://superawesomedomain.com:8443. I'm setting up a couple of client domains on the server. I'd like clients to be able to access plesk via a similar url, but instead it would be something like http://inferiorclientdomain.com:8443. This works ok in a sense, but it always redirect the request for inferiorclientdomain.com:8443 to superawesomedomain.com:8443. I'd like the control panel access url to remain on inferiorclientdomain.com. Is that possible? EDIT: System Info. Plesk 9.5.2 on CentOS 5 (Build 95100504.12)

    Read the article

  • OpenVPN - client-to-client traffic working in one direction but not the other

    - by Pawz
    I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >