Search Results

Search found 52569 results on 2103 pages for 'error suppression'.

Page 5/2103 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Why am i getting "error:1409F07F:SSL routines:SSL3_WRITE_PENDING: bad write retry" error while attem

    - by Amit Ben Shahar
    I came across this error, and had to look in a lot of placed until i was able to find the reason for this error and thought this might save someone else the hassle. the reason is pretty simple: when SSL_Write returns with SSL_ERROR_WANT_WRITE or SSL_ERROR_WANT_READ, you have to repeat the call to SSL_write with the same parameters again, after the condition is satisfied. Calling it with different parameters, will yield the 1409F07F bar write retry error. Hope this saved someone's important time :P Amit.

    Read the article

  • Pulseaudio is no longer working in Debian Squeeze: 'Failed to open module "module-combine-sink": file not found'

    - by mattalexx
    I'm having a problem with pulseaudio. My machine crashed, and when I rebooted and ran pavucontrol, I got a "Connection Failed: Connection refused" dialog. When I run pulseaudio --log-level=info --log-target=stderr from the command line, I get the following output: [...] I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: card.c: Created 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: alsa-sink.c: Successfully opened device front:1. I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo). I: alsa-sink.c: Successfully enabled mmap() mode. I: alsa-sink.c: Successfully enabled timer-based scheduling mode. I: (alsa-lib)control.c: Invalid CTL front:1 I: alsa-mixer.c: Unable to attach to mixer front:1: No such file or directory I: alsa-mixer.c: Successfully attached to mixer 'hw:1' W: alsa-mixer.c: Your kernel driver is broken: it reports a volume range from 0.00 dB to 0.00 dB which makes no sense. I: module-device-restore.c: Restoring volume for sink alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo. I: sink.c: Created sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: sink.c: alsa.resolution_bits = "16" I: sink.c: device.api = "alsa" I: sink.c: device.class = "sound" I: sink.c: alsa.class = "generic" I: sink.c: alsa.subclass = "generic-mix" I: sink.c: alsa.name = "USB Audio" I: sink.c: alsa.id = "USB Audio" I: sink.c: alsa.subdevice = "0" I: sink.c: alsa.subdevice_name = "subdevice #0" I: sink.c: alsa.device = "0" I: sink.c: alsa.card = "1" I: sink.c: alsa.card_name = "DigiHug USB Audio" I: sink.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: sink.c: alsa.driver_name = "snd_usb_audio" I: sink.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: sink.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: sink.c: device.bus = "usb" I: sink.c: device.vendor.id = "1852" I: sink.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: sink.c: device.product.id = "7022" I: sink.c: device.product.name = "DigiHug_USB_Audio" I: sink.c: device.serial = "FiiO_DigiHug_USB_Audio" I: sink.c: device.string = "front:1" I: sink.c: device.buffering.buffer_size = "352800" I: sink.c: device.buffering.fragment_size = "176400" I: sink.c: device.access_mode = "mmap+timer" I: sink.c: device.profile.name = "analog-stereo" I: sink.c: device.profile.description = "Analog Stereo" I: sink.c: device.description = "DigiHug_USB_Audio Analog Stereo" I: sink.c: alsa.mixer_name = "USB Mixer" I: sink.c: alsa.components = "USB1852:7022" I: sink.c: module-udev-detect.discovered = "1" I: sink.c: device.icon_name = "audio-card-usb" I: source.c: Created source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: source.c: device.description = "Monitor of DigiHug_USB_Audio Analog Stereo" I: source.c: device.class = "monitor" I: source.c: alsa.card = "1" I: source.c: alsa.card_name = "DigiHug USB Audio" I: source.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: source.c: alsa.driver_name = "snd_usb_audio" I: source.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: source.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: source.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: source.c: device.bus = "usb" I: source.c: device.vendor.id = "1852" I: source.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: source.c: device.product.id = "7022" I: source.c: device.product.name = "DigiHug_USB_Audio" I: source.c: device.serial = "FiiO_DigiHug_USB_Audio" I: source.c: device.string = "1" I: source.c: module-udev-detect.discovered = "1" I: source.c: device.icon_name = "audio-card-usb" I: alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms) I: alsa-sink.c: Time scheduling watermark is 20.00ms I: alsa-sink.c: Hardware volume ranges from 0 to 110. I: alsa-sink.c: Using hardware volume control. Hardware dB scale not supported. I: alsa-sink.c: Using hardware mute control. I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5. I: alsa-sink.c: Starting playback. I: module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="1" name="usb-FiiO_DigiHug_USB_Audio-01-Audio" card_name="alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1 (alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio) module loaded. I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 8000 Hz. I: alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: module-card-restore.c: Restoring profile for card alsa_card.usb-046d_08d7-01-U0x46d0x8d7. I: card.c: Created 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Loaded "module-alsa-card" (index: #5; argument: "device_id="2" name="usb-046d_08d7-01-U0x46d0x8d7" card_name="alsa_card.usb-046d_08d7-01-U0x46d0x8d7" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/sound/card2 (alsa_card.usb-046d_08d7-01-U0x46d0x8d7) module loaded. I: module-udev-detect.c: Found 3 cards. I: module.c: Loaded "module-udev-detect" (index: #6; argument: ""). I: module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #8; argument: ""). I: module-default-device-restore.c: Saved default sink 'alsa_output.pci-0000_00_1b.0.analog-surround-41' not existant, not restoring default sink setting. I: module-default-device-restore.c: Saved default source 'alsa_output.pci-0000_00_1b.0.analog-surround-41.monitor' not existant, not restoring default source setting. I: module.c: Loaded "module-default-device-restore" (index: #9; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #10; argument: ""). I: module.c: Loaded "module-always-sink" (index: #11; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #12; argument: ""). I: module.c: Loaded "module-suspend-on-idle" (index: #13; argument: ""). I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Loaded "module-console-kit" (index: #14; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #15; argument: ""). I: module.c: Loaded "module-cork-music-on-phone" (index: #16; argument: ""). E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I: module.c: Unloading "module-device-restore" (index: #0). I: module.c: Unloaded "module-device-restore" (index: #0). I: module.c: Unloading "module-stream-restore" (index: #1). I: module.c: Unloaded "module-stream-restore" (index: #1). I: module.c: Unloading "module-card-restore" (index: #2). I: module.c: Unloaded "module-card-restore" (index: #2). I: module.c: Unloading "module-augment-properties" (index: #3). I: module.c: Unloaded "module-augment-properties" (index: #3). I: module.c: Unloading "module-alsa-card" (index: #4). I: sink.c: Freeing sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" I: source.c: Freeing source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" I: card.c: Freed 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: module.c: Unloaded "module-alsa-card" (index: #4). I: module.c: Unloading "module-alsa-card" (index: #5). I: card.c: Freed 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Unloaded "module-alsa-card" (index: #5). I: module.c: Unloading "module-udev-detect" (index: #6). I: module.c: Unloaded "module-udev-detect" (index: #6). I: module.c: Unloading "module-esound-protocol-unix" (index: #7). I: module.c: Unloaded "module-esound-protocol-unix" (index: #7). I: module.c: Unloading "module-native-protocol-unix" (index: #8). I: module.c: Unloaded "module-native-protocol-unix" (index: #8). I: module.c: Unloading "module-default-device-restore" (index: #9). I: module.c: Unloaded "module-default-device-restore" (index: #9). I: module.c: Unloading "module-rescue-streams" (index: #10). I: module.c: Unloaded "module-rescue-streams" (index: #10). I: module.c: Unloading "module-always-sink" (index: #11). I: module.c: Unloaded "module-always-sink" (index: #11). I: module.c: Unloading "module-intended-roles" (index: #12). I: module.c: Unloaded "module-intended-roles" (index: #12). I: module.c: Unloading "module-suspend-on-idle" (index: #13). I: module.c: Unloaded "module-suspend-on-idle" (index: #13). I: module.c: Unloading "module-console-kit" (index: #14). I: client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Unloaded "module-console-kit" (index: #14). I: module.c: Unloading "module-position-event-sounds" (index: #15). I: module.c: Unloaded "module-position-event-sounds" (index: #15). I: module.c: Unloading "module-cork-music-on-phone" (index: #16). I: module.c: Unloaded "module-cork-music-on-phone" (index: #16). I: main.c: Daemon terminated. I believe the relevant part is this: E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I tried uninstalling and reinstalling pulseaudio, I tried to find a way to install module-combine-sink. Nothing worked. I'm on a Debian Squeeze 32-bit machine. What can I do to fix this?

    Read the article

  • postgresql error - ERROR: input is out of range

    - by CaffeineIV
    The function below keeps returning this error message. I thought that maybe the double_precision field type was what was causing this, and I tried to use CAST, but either that's not it, or I didn't do it right... Help? Here's the error: ERROR: input is out of range CONTEXT: PL/pgSQL function "calculate_distance" line 7 at RETURN ********** Error ********** ERROR: input is out of range SQL state: 22003 Context: PL/pgSQL function "calculate_distance" line 7 at RETURN And here's the function: CREATE OR REPLACE FUNCTION calculate_distance(character varying, double precision, double precision, double precision, double precision) RETURNS double precision AS $BODY$ DECLARE earth_radius double precision; BEGIN earth_radius := 3959.0; RETURN earth_radius * acos(sin($2 / 57.2958) * sin($4 / 57.2958) + cos($2/ 57.2958) * cos($4 / 57.2958) * cos(($5 / 57.2958) - ($3 / 57.2958))); END; $BODY$ LANGUAGE 'plpgsql' VOLATILE COST 100; ALTER FUNCTION calculate_distance(character varying, double precision, double precision, double precision, double precision) OWNER TO postgres; //I tried changing (unsuccessfully) that RETURN line to: RETURN CAST( (earth_radius * acos(sin($2 / 57.2958) * sin($4 / 57.2958) + cos($2/ 57.2958) * cos($4 / 57.2958) * cos(($5 / 57.2958) - ($3 / 57.2958))) ) AS text);

    Read the article

  • Error while trying to deploy blackberry application (Linker Error: 'VerifyError')

    - by Irwin
    Device: Curve 8520 OS: 4.6.1 JDE: 5.0.25 JDK: 1.6 Signed app? Yes. Hello, I'm trying to deploy a blackberry app (called 'ConstituenC') that works fine in the simulator. It uses restricted APIs, so I obtained a key from RIM and applied it via the Java Development Environment. When I attempt to run on my phone (BB Curve, 8520. OS: 4.6.1), it shows an error saying "'ConstituentC' attempts to access a secure API." The following is shown in the BB Event Log: Java Exception: Error starting ConstituentC: Module 'ConstituentC' attempts to access a secure API. Error starting ConstituentC: Module 'ConstituentC' attempts to access a secure API. Linker error: 'VerifyError' for ConstituentC Module 'ConstituentC' attempts to access a secure API module 9621 cannot reference net.rim.blackberry.api.mail.Store CMM: ConstituentC (9621) invalid sig for 0x424252 VM:LINK ConstituentC Any ideas on how this could be resolved?

    Read the article

  • TypeError: Error #1009 - (Null reference error) With Flash.

    - by Wind Chimez
    I am not an expert in flash, but i do work with AS and tweak Flash projects , though not having deep expertise in it. Currently i need to revamp a flash website done by one another guy, and the code base given to me, upon execution is throwing the following error. "--- TypeError: Error #1009: Cannot access a property or method of a null object reference. at NewSite_fla::MainTimeline/__setProp_ContactOutP1_ContactOut_Contents_0() at NewSite_fla::MainTimeline/frame1() --" The structure of the project is like, it has the different sections split into different movie clips. There is no single main timeline, but click actions on different areas of seperate movie clips will take them between one another. All the AS logic of event handling are written inline in FLA , no seperate Document class exists. Preloader Movie clip is the first one getting loaded. As i understood the error is getting thrown initially itself, and it is not happening due to any Action script logic written inline, because it is throwing error even before hitting the first inline AS code. I am not able to figure Out what exactly it causing the problem, or where to resolve it. I setup the stuff online, for reference if anybody want to take a look at it, and here is the link.You need to have flash debugger turned ON in your browser, if need to see the exception getting triggered. http://tinyurl.com/2alvlfx I really got stuck at this point. Any help will be great.I had not seen the particular solution i am looking for anywhere yet, though Error #1009 is common.

    Read the article

  • .net layered design: return error code to forms indicating which controls have an error

    - by David Casillas
    Let's say I have a simple application. It tries to add a new entry to a database grabing the info from the user. The information is a tipical MasterDetail objetc like an invoice. The Invoice object used to collect the data has some simple atributes (Id, Date, etc...) and a List of InvoiceDetail, consisting of some simple atributes (invoiceId, productId, quantity, etc...) A form in the UI Layer collects the data from the user, creates an instance of Invoice and sends it to the Bussiness Layer. The Bussines layer sends the data to a Validation Module. If any error in the input is detected it has to return some kind of error code. The Bussiness Layer has to send the error code back to the Form to let the user correct the worng information. I want the application to display some kind of warning (a different background color for example) in every form control with an error. ¿What's a good aproach to I manage the errors to be able to inform the form which controls are wrong? ¿Can I create an error object?¿Use delegates?. I'm using VB.net but don't think this is relevant to the solution of the problem. P.D: Please suggest me some tags to this post.

    Read the article

  • What is tha CAUSE of Error 523 and Error 200 in Blackberry handhelds

    - by voipsecuritydigest.com
    I'm Blackberry developer, customers using my application experiencing Error 523 and Error 200. Remedies to those errors are in first case - remove application, my application. In second case totally reload OS! This is very bad, and customers blame me! But this is I don't do anything illegal to make blackberry crash. I just used a lot of memory, which is obvious because customer want that. Everywhere including Blackberry knowledge base people talking how to fix the problem, which may happened to everybody using application from well known brands, for example Yahoo! finances. But nobody explains what is the mechanism behind this, and if it is possible to avoid the problem. I would like to know what is that CAUSE of Error 523 and Error 200?

    Read the article

  • Cloud : suppression des coûts de transferts de données pour les plates-formes Windows Azure et Amazon Web Services

    Cloud : suppression des coûts de transferts des données Pour les plates-formes Windows Azure et Amazon Web Services Amazon a annoncé la suppression des frais sur tous les transferts de données sur sa plate-forme Cloud Amazon Web Services (AWS). Cette suppression vise à convaincre certaines entreprises préoccupées par le coût des migrations vers le Cloud liés aux quantités importantes de données. Les utilisateurs pourront donc up-loader des petaoctes de données sans avoir à payer des frais supplémentaires. La décision est valable pour le transfert de données dans n'importe quelle région et pour n'importe quel service d'AWS. En plus de la suppression des couts de trans...

    Read the article

  • Error handling in PHP

    - by Industrial
    Hi guys, We're building a PHP app based on Good old MVC (codeigniter framework) and have run into trouble with a massive chained action that consists of multiple model calls, that together is a part of a big transaction to the database. We want to be able to do a list of actions and get a status report of each one back from the function, whatever the outcome is. Our first initial idea was to utilize the exceptions of PHP5, but since we want to also need status messages that doesnt break the execution of the script, this was our solution that we came up with. It goes a little something like this: $sku = $this->addSku( $name ); if ($sku === false) { $status[] = 'Something gone terrible wrong'; $this->db->trans_rollback(); return $status; } $image= $this->addImage( $filename); if ($image=== false) { $error[] = 'Image could not be uploaded, check filesize'; $this->db->trans_rollback(); return $status; } Our controller looks like this: $var = $this->products->addProductGroup($array); if (is_array($var)) { foreach ($var as $error) { echo $error . '<br />'; } } It appears to be a very fragile solution to do what we need, but it's neither scalable, neither effective when compared to pure PHP exceptions for instance. Is this really the way that this kind of stuff generally is handled in MVC based apps? Thanks!

    Read the article

  • PHP MVC error handling, view display and user permissions

    - by cen
    I am building a moderation panel from scratch in a MVC approach and a lot of questions cropped up during development. I would like to hear from others how they handle these situations. Error handling Should you handle an error inside the class method or should the method return something anyway and you handle the error in controller? What about PDO exceptions, how to handle them? For example, let's say we have a method that returns true if the user exists in a table and false if he does not exist. What do you return in the catch statement? You can't just return false because then the controller assumes that everything is alright while the truth is that something must be seriously broken. Displaying the error from the method completely breaks the whole design. Maybe a page redirect inside the method? The proper way to show a view The controller right now looks something like this: include('view/header.php'); if ($_GET['m']=='something') include('view/something.php'); elseif ($_GET['m']=='somethingelse') include('view/somethingelse.php'); include('view/foter.php'); Each view also checks if it was included from the index page to prevent it being accessed directly. There is a view file for each different document body. Is this way of including different views ok or is there a more proper way? Managing user rights Each user has his own rights, what he can see and what he can do. Which part of the system should verify that user has the permission to see the view, controller or view itself? Right now I do permission checks directly in the view because each view can contain several forms that require different permissions and I would need to make a seperate file for each of them if it was put in the controller. I also have to re-check for the permissions everytime a form is submitted because form data can be easily forged. The truth is, all this permission checking and validating the inputs just turns the controller into a huge if/then/else cluster. I feel like 90% of the time I am doing error checks/permissions/validations and very little of the actual logic. Is this normal even for popular frameworks?

    Read the article

  • Good SQL error handling in Strored Procedure

    - by developerit
    When writing SQL procedures, it is really important to handle errors cautiously. Having that in mind will probably save your efforts, time and money. I have been working with MS-SQL 2000 and MS-SQL 2005 (I have not got the opportunity to work with MS-SQL 2008 yet) for many years now and I want to share with you how I handle errors in T-SQL Stored Procedure. This code has been working for many years now without a hitch. N.B.: As antoher "best pratice", I suggest using only ONE level of TRY … CATCH and only ONE level of TRANSACTION encapsulation, as doing otherwise may not be 100% sure. BEGIN TRANSACTION; BEGIN TRY -- Code in transaction go here COMMIT TRANSACTION; END TRY BEGIN CATCH -- Rollback on error ROLLBACK TRANSACTION; -- Raise the error with the appropriate message and error severity DECLARE @ErrMsg nvarchar(4000), @ErrSeverity int; SELECT @ErrMsg = ERROR_MESSAGE(), @ErrSeverity = ERROR_SEVERITY(); RAISERROR(@ErrMsg, @ErrSeverity, 1); END CATCH; In conclusion, I will just mention that I have been using this code with .NET 2.0 and .NET 3.5 and it works like a charm. The .NET TDS parser throws back a SQLException which is ideal to work with.

    Read the article

  • WPF Application doesn't work on some machines: Stopped working error

    - by Hun1Ahpu
    My WPF application works fine on a number of machines, but now I get a report about this error on a user machine: Description: Stopped working Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: mysoftware.exe Problem Signature 02: 1.0.0.1 Problem Signature 03: 4bbcd9d9 Problem Signature 04: PresentationFramework Problem Signature 05: 3.0.0.0 Problem Signature 06: 4a174fbc Problem Signature 07: 624f Problem Signature 08: e1 Problem Signature 09: System.Windows.Markup.XamlParse OS Version: 6.1.7600.2.0.0.256.48 Locale ID: 1033 I was trying to catch Exception using Application DispatcherUnhandledException but this didn't help. And warping Window1 constructor in try/catch block too. .NET Framework 3.5 is installed on that machine. How can I figure out the reason of crashing: log this error, debug, ...?

    Read the article

  • mySQL: Select WHERE causes error - why?

    - by Industrial
    Hi everybody, I have this query: SELECT `manufacturers`.*, `languages`.*, COUNT(`products`.`id`) AS productcount FROM (`manufacturers`) WHERE manufacturers.flushed = 0 JOIN `languages` ON `manufacturers`.`lang` = `languages`.`id` LEFT OUTER JOIN `products` ON `products`.`manuf` = `manufacturers`.`mid` GROUP BY manufacturers.id ORDER BY `languages`.`id` asc, `manufacturers`.`mid` asc; Without the WHERE row, everything works great, but with it, I get a Error 1064 (Syntax error) thrown in my face. I guess that it has something to do with the actual placement of the WHERE row in the query, so I tried to move it around, but without any luck. What can I do?

    Read the article

  • Cannot reinstall MySql in 11.10 - ERROR: There's not enough space in /var/lib/mysql/

    - by Robin McCain
    I've tried it all (removing all the packages associated with MySQL) but keep getting stuff like this: Preconfiguring packages ... (Reading database ... 142196 files and directories currently installed.) Unpacking mysql-server-5.1 (from .../mysql-server-5.1_5.1.63-0ubuntu0.11.10.1_amd64.deb) ... ERROR: There's not enough space in /var/lib/mysql/ dpkg: error processing /var/cache/apt/archives/mysql-server-5.1_5.1.63-0ubuntu0.11.10.1_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/mysql-server-5.1_5.1.63-0ubuntu0.11.10.1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Here is my drive space map. root@kyle:/# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/kyle-root 59361428 59021768 0 100% / udev 1014052 8 1014044 1% /dev tmpfs 409304 1476 407828 1% /run none 5120 0 5120 0% /run/lock none 1023256 0 1023256 0% /run/shm /dev/sda1 233191 46888 173862 22% /boot /dev/md0 1922858288 1048513192 776669500 58% /media/array The root volume actually only has about 10 gigabytes in use on the hard drive (which has a 60 gig partition). /dev/md0 is a 2 TB raid array.

    Read the article

  • Displaying Datamatrix in application error screen

    - by DaveNay
    Quite often we will get a report from a user in the field saying there was an error in our application. Frequently this leads to the typical round of "What was the error?" "I don't know, it was just an error." We of course log these faults to the log files, and we can even enable detailed debug logs, but this involves the end user changing a setting in the configuration file and then finding the correct files and then emailing them to us. As I'm sure you can all imagine, there are plenty of pitfalls and alligators in this methodology. Recently a couple of people have used their cell phone to email me a "screen capture" of the fault, and while this helps, we still have to scrutinize the image to find the exact fault, and if enabled, the stack trace. So this evening, I had the brilliant idea (IMHO) to encode the fault into a Datamatrix barcode image and then encourage users to send me a picture from their cell phone. I can then decode the datamatrix and get a parse-able error message! Our core technology is machine vision, so the decoding of the datamatrix image would be trivial, I just need to find a method of generating the actual image to display in the fault handler. Thoughts?

    Read the article

  • Displaying Datamatrix in application error screen

    - by DaveNay
    Quite often we will get a report from a user in the field saying there was an error in our application. Frequently this leads to the typical round of "What was the error?" "I don't know, it was just an error." We of course log these faults to the log files, and we can even enable detailed debug logs, but this involves the end user changing a setting in the configuration file and then finding the correct files and then emailing them to us. As I'm sure you can all imagine, there are plenty of pitfalls and alligators in this methodology. Recently a couple of people have used their cell phone to email me a "screen capture" of the fault, and while this helps, we still have to scrutinize the image to find the exact fault, and if enabled, the stack trace. So this evening, I had the brilliant idea (IMHO) to encode the fault into a Datamatrix barcode image and then encourage users to send me a picture from their cell phone. I can then decode the datamatrix and get a parse-able error message! Our core technology is machine vision, so the decoding of the datamatrix image would be trivial, I just need to find a method of generating the actual image to display in the fault handler. Thoughts?

    Read the article

  • SQL SERVER – FIX : ERROR : 4214 BACKUP LOG cannot be performed because there is no current database

    - by pinaldave
    I recently got following email from one of the reader. Hi Pinal, Even thought my database is in full recovery mode when I try to take log backup I am getting following error. BACKUP LOG cannot be performed because there is no current database backup. (Microsoft.SqlServer.Smo) How to fix it? Thanks, [name and email removed as requested] Solution / Fix: This error can happen when you have never taken full backup of your database and you try to attempt to take backup of the log only. Take full backup once and attempt to take log back up. If the name of your database is MyTestDB follow procedure as following. BACKUP DATABASE [MyTestDB] TO DISK = N'C:\MyTestDB.bak' GO BACKUP LOG [MyTestDB] TO DISK = N'C:\MyTestDB.bak' GO Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Backup and Restore, SQL Error Messages, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL Log

    Read the article

  • Different callbacks for error or error as first argument?

    - by Florian Margaine
    We (and the JS SO chat room) had a talk with @rlemon some days ago about his Little-XHR library about error handling. Basically, we wanted to decide which error handling pattern should be used: xhr.get({ // Some parameters, and then success: function(data) {}, failure: function(data) {} }) Or: xhr.get({ // Some parameters, and then callback: function(err, data) {} }) One is more jQuery-like, while the other is more Node-like. Some say that the first pattern makes you think more about handling error. I think the opposite, since you may forget the other callback function, while the argument is always there on the second pattern. Any opinion/advantage/drawback about both these patterns?

    Read the article

  • Translating error messages from an external API?

    - by Jan Fabry
    If I am localizing a piece of software that uses an external API, how should I handle error messages that originate in this API? I do not control the API, I only consume it. The error responses are not very structured: some contain error codes, some contain verbose details in the text, others almost nothing. Some errors can be fixed by the user (incorrect configuration), some are caused by the external service (server overload), some could be caused by a bug in my software (of course, this would be very unlikely...). I would like to provide a smooth experience to my end-users, so they know what went wrong and what they can do to fix it. What is the best strategy to use here? (This is a generalization of a question from the WordPress Stack Exchange. I thought it would be worth re-asking here, because it is not limited to WordPress plugins.)

    Read the article

  • System Error Report /usr/bin/Xorg

    - by jimirings
    I have recently begun getting a System Error Report message when I start up my computer. I haven't installed anything recently other than the usual updates or done anything else out of the ordinary. The details for the report just say "/usr/bin/Xorg". It doesn't seem to be causing me any problems beyond the annoying error message. I saw these questions regarding this problem: System Error Report - Xorg How do I enable or disable Apport? That's all dandy for getting the message to go away, but I'd rather fix the problem. Any ideas how I can make that happen? I'm running Ubuntu 12.04 on a Toshiba NB505. I am, of course, happy to provide any other relevant information that may be needed. Thanks in advance.

    Read the article

  • error: you need to load kernel first

    - by Angelos318
    I made a clean install on my Sony Vaio laptop, of Ubuntu 11.10 and when the installation was ready, it prompted to remove the usb I was installing the distro from, and press enter to reboot. After this reboot the first thing I got was the following error: error: couldn't read file error: you need to load the kernel first Press any key to continue.. After that it throws me back to the Grub select screen: Ubuntu, with linux 3.0.0-14-generic-pae recovery mode previous linux versions (none since I made a clean install) memory test If i choose the first option it shows only a black screen and never loads anything. If i reboot the same thing happens. Could I repair this using boot-repair? Is there any other way? Note: I know nothing about linux code so i am a total noob on this one Update: boot-repair did not help Grub.cfg here: http://pastebin.com/GKLuDuhM Boot Info Script: http://pastebin.com/indARkKJ

    Read the article

  • New to Java Programming - Error help

    - by JJJ
    I am going through a Java book and drafting the examples and have run into the following error when compiling this code. Any help would be appreciated thank you. Error: Main.java:3: class Addition is public, should be declared in a file named Addition.java public class Addition        ^ 1 error Code: import java.io.*; import java.util.Scanner; public class Addition {   public static void main(String[] args) { java.util.Scanner input = new java.util.Scanner(System.in);  int number1; int number2; int sum; System.out.print( "Enter first digit: " ); number1 = input.nextInt(); System.out.print( "Enter second digit:" ); number2 = input.nextInt(); sum = number1 + number2; System.out.printf( "Sum is %d\n, sum" );      } }

    Read the article

  • dpkg reports error on package icaclient

    - by Photonics1
    I installed the icaclient (it's a client for Citrix) a while back. I don't exactly remember what I did to get it working but it was enervating. I had to install some old packages not even avaiable for ubuntu (12.04) and in the end I used some stuff from old rpms. Anyway the client is more or less working now but I always get a dpkg error when installing or updating something. The (translated) error message is something like: dpkg: Error while processing icaclient:i386 (--configure): subprocess installed post-installation-script return errorcode 2 I just want to tell dpkg to ignore this or remove this post-install-script but I don't know how. Thanks!

    Read the article

  • Hard disk error

    - by Nadim A. Hachem
    I got this error during installation. "The installer encountered an error copying files to the hard disk: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment." how can i fix this and what does it mean specifically? i'm installing via usb so it can't be the CD. the laptop is recent so it cant be an old HD.

    Read the article

  • Get more error information from unhandled error

    - by Andrew Simpson
    I am using C# in a desktop application. I am calling a DLL written in C that I do not have the source code for. Whenever I call this DLL I get an untrapped error which I trap in an UnhandledException event/delegate. The error is : object reference not set to an instance of an object But the stack trace is empty. When I Googled this the info back was that the error was being hanlded eleswhere and then rethrown. But this can only be in the DLL I do not have the source code for. So, is there anyway I can get more info about this error? This is my code... in program.cs... AppDomain.CurrentDomain.UnhandledException += new UnhandledExceptionEventHandler(CurrentDomain_UnhandledException); static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e) { try { Exception _ex = (Exception)e.ExceptionObject; //the stact trace property is empty here.. } finally { Application.Exit(); } } My DLL... [DllImport("AutoSearchDevice.dll", EntryPoint = "Start", ExactSpelling = false, CallingConvention = CallingConvention.StdCall)] public static extern int Start(int ASD_HANDLE); An I call it like so: public static void AutoSearchStart() { try { Start(m_pASD); } catch (Exception ex) { } }

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >