Search Results

Search found 133 results on 6 pages for 'watermark'.

Page 5/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

  • Unable to install ubuntu on a AMD 64 bit system with a AMD Radeon HD 6670 graphics card

    - by Tom Wingrove
    I’ve been running a dual boot system (Ubuntu/Windows7) for two years or so with no problems. I recently built an AMD 64 Bit System, re-installed Windows but when I went to load Ubuntu inside Windows, hit a snag. The screen view during installation became small square blocks of colour, which obviously is a graphics drive problem. I tried various live disks both 32 & 64 bit for, Ubuntu 12.04, 11.10 & 10.10, all but Ubuntu 10.10 had the same problem. Ubuntu 10.10 loaded ok, installed the presented ATI graphics driver as usual but was left with the AMD Unsupported watermark at the bottom right of the screen. The graphics card installed in the computer is an MSI ATI Radeon HD 6670 (in effect an AMD Radeon HD 6670). I am fairly new to linux and while I can install and tweak the OS, I am rather baffled as to what to do. So my question is will an up to date ATI Driver be released in the near future for installation/live disks? Or am I going to have to downgrade my graphics card to use linux? Yours Tom Wingrove

    Read the article

  • Ubuntu 12.10 Quantal Quetzal and AMD 12.11 Beta Driver

    - by White
    I'm using a Quantal AMDx64 install and a XFX Radeon HD5850 video card. I first enabled restricted drivers through additional drivers, but it resulted in breaking Unity and Compiz (I can only see my wallpaper and shortcuts. But the terminal still works and Nautilus too, however, without Close/Maximize/Minimize and slower). Then I uninstalled it and everything went back to normal. Then I installed it via terminal (12.10 version), and the result was the same. Then I downloaded it via ATI's web site (12.11 beta) and installed the .run file using the terminal, but the result was yet again the same. Then I went to the terminal and entered these commands: sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev* - It said it had nothing to uninstall sudo rm /ect/x11/xorg.conf - No such directory sudo dpkg-reconfigure xserver-xorg sudo startx sudo cp/ect/x11/xorg.conf.orig /ect/x11/xorg.conf - Also, no such directory sudo aticonfig --initial sudo reboot Then, I was presented with the log in screen, but when I tried to login (with my account), it flashed a black screen and then threw me back. Guest account still works (without unity and compiz, tough) and I can still use TTY. And I also got the "AMD Testing Only" watermark. Then I figured that I should stop messing with the terminal and get help before I unleashed Apocalypse XD. Side notes: My Ubuntu is installed on a ext4 partition with 60GB, and I dual boot with Windows 7 (at least for now). My internet is a 50kbps 3G-ish, so downloading even small files is a pain, let alone a video driver. I would rather not reinstall the O.S., it was a herculean task to download everything I had in there, and I have very little free disk space for backups. I'm still new to Ubuntu (I know some basic commands), and I don't know how to debug, so please, be patient XD And using Windows, my internet is even slower (is that possible?), so it kind of leaves a torture aftertaste xD. So, if you guys could answer quickly, it would be greatly appreciated. Thanks in advance. If you need any info, just ask (and explain how to get it XD).

    Read the article

  • CodePlex Daily Summary for Tuesday, May 31, 2011

    CodePlex Daily Summary for Tuesday, May 31, 2011Popular ReleasesNearforums - ASP.NET MVC forum engine: Nearforums v6.0: Version 6.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Authentication using Membership Provider for SQL Server and MySql Spam prevention: Flood Control Moderation: Flag messages Content management: Pages: Create pages (about us/contact/texts) through web administration Allow nearforums to run as an IIS subapp Migrated Facebook Connect to OAuth 2.0 Visit the project Roadmap for more details.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.8b: Changes: - fix critical issue 15922(AccessViolationException) once and for all update is strongly recommended Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddin Examples in C# and VB....Facebook Graph Toolkit: Facebook Graph Toolkit 1.5.4186: Updates the API in response to Facebook's recent change of policy: All Graph Api accessing feeds or posts must provide a AccessToken.SharePoint Farm Poster: SharePoint Farm Poster: SharePoint Farm Poster is generated by a PowerShell Script. Run this script under the Farm Admin Account. After downloading, unblock the file in the Property Window. Current version is beta : v0.3.0VCC: Latest build, v2.1.40530.0: Automatic drop of latest buildServiio for Windows Home Server: Beta Release 0.5.2.0: Ready for widespread beta. Synchronized build number to Serviio version to avoid confusion.AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta4: ??AcDown?????????????,??????????????,????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??v3.0 Beta4 2011-5-31?? ???Bilibili.us????? ???? ?? ???"????" ???Bilibili.us??? ??????? ?? ??????? ?? ???????? ?? ?? ???Bilibili.us?????(??????????????????) ??????(6.cn)?????(????) ?? ?????Acfun?????????? ?????????????? ???QQ???????? ????????????Discussion...Terraria Map Generator: TerrariaMapTool 1.0.0.2 Beta: Version 1.0.0.2 Beta Release - Now has a Gui - Draws backgrounds (May still not be exact) - Hopefully fixed support on DirectX 9 machine.CodeCopy Auto Code Converter: Code Copy v0.1: Full add-in, setup project source code and setup fileEnhSim: EnhSim 2.4.5 ALPHA: 2.4.5 ALPHAThis release supports WoW patch 4.1 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in the T12 s...TerrariViewer: TerrariViewer v2.4.1: Added Piggy Bank editor and fixed some minor bugs.Kooboo CMS: Kooboo CMS 3.02: What is new in kooboo cms 3.02 The most important updates of this version is the Kooboo site builder, an unique and creative web design tool, design an professional website and export to Kooboo CMS. See: http://www.sitekin.com Add Version contorl on View, Layout and other elements. Add user CMS language selection, user can select a language to use on their CMS backend. Add User profile provider, you can use now stop website user information on a SQL database. Previously it stored on XML...mojoPortal: 2.3.6.6: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2366-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Terraria World Creator: Terraria World Creator: Version 1.01 Fixed a bug that would cause the application to crash. Re-named the Application.VidCoder: 0.9.0: New startup UI for one-click scanning of discs or opening a file/folder. New seek bar on the preview window to make switching previews easier (you can click anywhere on the bar). Added gradient backgrounds to the main window to visually group the sections. Added Open Video File and Open Video Folder options to the File menu. Moved preview button to be in line with the other control buttons. Fixed settings getting in a weird state if they were saved without an output folder being chos...General Media Access WebService: 0.2.0.0 Beta: Updated GMA release with sorting/ordering mechanisms. Several bug fixes.Microsoft All-In-One Code Framework - a centralized code sample library: All-In-One Code Framework 2011-05-26: Alternatively, you can install Sample Browser or Sample Browser VS extension, and download the code samples from Sample Browser. Improved and Newly Added Examples:For an up-to-date code sample index, please refer to All-In-One Code Framework Sample Catalog. NEW Samples for Dynamics Sample Description Owner CSDynamicsNAVWebServices The code sample shows syntax for calling Dynamics NAV Web Services. Lars Lohndorf-Larsen NEW Samples for WPF Sample Description Owner CSWPFDataGridCustomS...Terraria World Viewer: Version 1.1: Update May 26th Added Chest Filtering, this allows chests only containing certain items to have their symbol drawn. (Its under advanced settings tab) GUI elements (checkboxes/etc) are persistant between uses of the application Beta Worlds (i.e. Release #38) will work properly Symbols can be enabled or disabled on a per symbol basis Chest Information tab which is just a dump of the current chest information Meterorite is now visible as a bright magenta pink Application defaults to ...MVC Controls Toolkit: Mvc Controls Toolkit 1.1 RC: *Added: Compatibility with jQuery 1.6.1 Rendering of enumerables with images and/or customizable strings improved the client side tempate engine added new parameters to the template definition binding all new knockout bindings helpers have been fully implemented added a new overload for defining the client-side ViewModel The SetTme method has the option to store the theme in a permanent cookie If no CSS class is provided for the watermark of a TypedTextBox the watermark class of the current t...patterns & practices: Project Silk: Project Silk - Documentation Only Drop - May 24: To get the latest code, please see the previous drop here. Guidance Chapters Ready for Review The following chapters (provided in CHM or PDF format) are ready for community review. Our team very much appreciates your feedback and technical review. All documentation feedback should be posted in the Issue Tracker; if required, a document can be attached along with the feedback. Architecture jQuery UI Widgets Server-Side Implementation Security Unit Testing Web Applications Widget Q...New Projects#liveDB: liveDB is an in-memory database engine for Microsoft .NET providing full ACID support, lightning fast performance and offering a significant reduction of development and operational costs. liveDB is built on Live Domain Technology(TM).8 hours: 8hours Private studyABox2d: A port of Box 2d game engine doing it has an exercise to study how the game engine work.ADempiere.NET: If I have enough time and support I we will translate this into .NETAlmonaster: Almonaster is a turn-based multi-player war game. It is free for all players and comes with absolutely no warranty. The game is fully web-based and requires no downloads, Javascript, Java or ActiveX controls. ASPone API: ASPone partnerské API (aplikacní programové rozhraní) je rozhraní pro vytvorené a urcené pro partnery spolecnosti ASPone, s.r.o. Pomocí tohoto aplikacního rozhraní mužete zautomatizovat radu úkonu, které by pomocí webového rozhraní mohly být casove nárocnejší nebo vyžadují interakci cloveka. API umožnuje zautomatizovat radu úkonu souvisejících se správou domén, doménových kontaktu, webhostingu, databází, serveru a mnoha dalších. Pro zjednodušení práce s API jsou již pripraveni dva ukázkový...CodeCopy Auto Code Converter: This add-in project converts c# and vb.net codes in visual studio.drms: Data Resource Management SystemDrop Down CheckBoxList control (DropDownCheckBoxes): DropDownCheckBoxes is an ASP.NET server control directly inheriting standard ASP.NET CheckBoxList control and fully it supports parent's API (except members responsible for rendering and styling). Thus in most cases CheckBoxList control can be simply replaced with DropDownCheckBoxes with no need to change any data binding code or event handlers. In normal state the control is displayed as a select (DropDownList) control. Clicking the expand button shows a list with check boxes. When the se...Extended Registration module for Orchard CMS: This project has a dependency on the Contrib.Profile module. With this module enabled, users must fill out any parts you add to the User ContentItem in the Registration page. Ideal if you require additional information from your users.GreenWay: Car navigation softwareHost Profiles: Host Profiles is small tool to control, switch and management the hosts file of the computer. The hosts file is located in "c:\windows\system32\drivers\etc\hosts".HRM System MVVM sample code: This is the sample WPF MVVM application that i've described in my blog posts. I hope to give you a clear view of mvvm and other commonly used patterns.Mi Game Library: Ever wanted to store all the games you own into one place that you, could then later come see and search also with your own personal wish list!Micorrhiza: Micorrhiza is a client-server solution written in C# for voice- and video-communications between users in local and global networks.MPlayer.NET for Windows Forms & WPF: MPlayer.NET is a wrapper around MPlayer executable. It's developed on .NET platform and includes visual controls for both Windows Forms and WPF applications.MyGet - NuGet-as-a-Service: This project is the source for http://myget.org. MyGet offers you the possibility to create your own, private, filtered NuGet feed for use in the Visual Studio Package Manager. It can contain packages from the official NuGet feed as well as your private packages, hosted on MyGet.MZExtensions: A collection of handy C# Extension Methods.NCAds: NCadsNetSync: Universal file synchronization agent.OLE 1C7.7: OLE 1C7.7 ?????????? ??????? ??? ??????? ? 1?7.7 ????????? OLE ??????????.Pear 2.5: Pear 2.5 is a web browser which has MetroUI which is also known for WP7. Pear 2.5's graphics is totally made up with MetroUI and looks stunning when browse. This version has 3 builds - 2 alpha builds and 1 gamma delta (beta) build. It's developed in VB.NET which is the easiest.ProjectOne: ProjectOne is a Open Community Information Sharing Website regarding Realty as its primary source.russomi: russomiSopaco Server Foundation 1.x: The one earlier version of my server infrastructure(SSF, Sopaco Server Foundation 1.x, owned by ??)。 Network Layer Based On MINA, message meta in 1.x is hard coded to 6bytes message header like this struct NetworkMessageHeader { short msgId; int msgLength; } struct NetworkMTray Timer: A simple timer/stopwatch which runs fromt he system tray. I started it as a hobby learning project to understand the Win32 API. Now open sourcing it to get more inputs about the same, and at the same time it may prove helpful to othersVENSOFT DIPERCAX: Proyecto Final del Curso de Proyectos II de la Universidad Privada del NorteWindows Phone Blog Menu: A Silverlight navigation control that looks like a Windows Phone 7. The live tiles are links to websites. Use this control on your blog or website to show your love for WP7. It is a creative way to link to external sites you are interested in.

    Read the article

  • Background Image in JTextPane

    - by Nivas
    How do I set a background image to a JTextPane - some sort of a watermark. I tried this option - creating a child class of JTextPane and use the paint method to draw the image. But then the text is displayed "below" the image than above. Is there any "standard" or "well known" way to do this? (BTW, I tried (something silly?) making the content type "text/html", and setting the image as the background image of a <div> but it did not help.)

    Read the article

  • Python imaging alternatives

    - by Paul McMillan
    I have python code that needs to do just a couple simple things to photographs: crop, resize, and overlay a watermark. I've used PIL, and the resample/resize results are TERRIBLE. I've used imagemagick, and the interface and commands were designed by packaging a cat in a box, and then repeatedly throwing it down a set of stairs at a keyboard. I'm looking for something which is not PIL or Imagemagick that I can use with python to do simple, high-quality image transformations. For that matter, it doesn't even have to have python bindings if the command line interface is good. Oh, and it needs to be relatively platform agnostic, our production servers are linux, but some of our devs develop on windows. It can't require the installation of a bunch of silly gui code to use as a library, either.

    Read the article

  • Free SWF Obfuscator

    - by Cyclone
    Does anybody know of a free flash obfuscator? All I can find are commercial ones with free trials. I have done numerous google searches, and have been unable to find what I am looking for. I know that obfuscators do not make your swf hack proof, but they make things harder. Things I am looking for in an obfuscator: Unlimited obfuscations No time limit No watermark (or on the left side only! Right side is no good, same with center) Able to publish work (no special player needed other than standard flashplayer) I really was surprised to see how hard it was to find a good obfuscator (tried encoder, protection, etc. instead as well) and how easy it is to find a decompiler.... It is imperative that my code be protected, at least partially, to discourage the hacking of my game.

    Read the article

  • WPF Editable Combobox IsFocused problem

    - by Rey
    I am developing a Watermarked Combobox by modifying Combobox Control template. everything is fine when combo box is not in editable mode. but when i change edit mode to True, isFocused property never set to True. this is because in edit mode, combo box is using a Text Box. This is exact copy of this StackOverflow question: . there are no responces to that question. please drop a line if you know how to solve this. or please point me to links that provide Watermark Combobox implementation. Thanks, Rey.

    Read the article

  • How does the Licenses.licx based .Net component licensing model work?

    - by Gishu
    I've encountered multiple third part .Net component-vendors use a licensing scheme. On an evaluation copy, the components show up with a nag-screen or watermark or some such indicator. On a licensed machine, a Licenses.licx is created - with what appears to be just the assembly full name/identifiers. This file has to be included when the client assembly is built. How does this model work? Both from component-vendors' and users' perspective. What is the .licx file used for? Should it be checked in? We've had a number of issues with the wrong/right .licx file being checked in and what not

    Read the article

  • I'm working on a website that sells different artwork, what's the best way to handle different image

    - by ThinkingInBits
    I'm working on a website that will allow users to upload and sell their artwork in different sizes. I was wondering what the best way would be to handle the different file sizes automatically. A few points I was curious on: How to define different size categories (small, medium, large) in such a way that I'll be able to dynamically re-size images with proportional dimensions. Should I store actual jpegs of the different sizes for download? Or would it be easier to generate these different sizes for download on the fly My thumbnails will be somewhat larger than your average thumbnails, should I store a second 'thumbnail image' with the sites watermark overlaying it? Or once again, generate this on the fly? All opinions, advice are greatly appreciated!

    Read the article

  • add text to curved image

    - by miki123
    $config['source_image'] = '/path/to/image/mypic.jpg'; $config['wm_text'] = 'Copyright 2006 - John Doe'; $config['wm_type'] = 'text'; $config['wm_font_path'] = './system/fonts/texb.ttf'; $config['wm_font_size'] = '16'; $config['wm_font_color'] = 'ffffff'; $config['wm_vrt_alignment'] = 'bottom'; $config['wm_hor_alignment'] = 'center'; $config['wm_padding'] = '20'; $this->image_lib->initialize($config); $this->image_lib->watermark(); This is water mark code in php, it is working fine when we add text to curve image like mug image, the letter is not overlap the curved image how can we overcome?

    Read the article

  • TextBoxWatermarkExtender and Custom validator problem

    - by Mac
    i have two textboxes one for phone and one for email for phone textbox i have used textbox watermark extender and a filtered textbox extender provided in ajax extension toolkit as a water mark extender text iam displaying only numbers are allowed. the problem is that on client side validation of two textboxes by custom validator iam checking function ValidatePhoneEmail(source, args) { var txtEmail = $('#<%= txtEmail.ClientID %'); var txtPhone = $('#<%= txtPhone.ClientID %>'); if (txtEmail.focus().val().trim() != '' || txtPhone.focus().val().trim() != '') { args.isValid = true; } else { args.isValid = false; } } and the problem is phone textbox is not empty as it contains text "Only Numbers" so it always return false what to do..?

    Read the article

  • How do I add text to curved image?

    - by miki123
    $config['source_image'] = '/path/to/image/mypic.jpg'; $config['wm_text'] = 'Copyright 2006 - John Doe'; $config['wm_type'] = 'text'; $config['wm_font_path'] = './system/fonts/texb.ttf'; $config['wm_font_size'] = '16'; $config['wm_font_color'] = 'ffffff'; $config['wm_vrt_alignment'] = 'bottom'; $config['wm_hor_alignment'] = 'center'; $config['wm_padding'] = '20'; $this->image_lib->initialize($config); $this->image_lib->watermark(); This is water mark code in php, it is working fine when we add text to curve image like mug image, the letter is not overlap the curved image how can we overcome?

    Read the article

  • Transparent control over WM Player ActiveX component in .NET

    - by FatDaemon
    I have a Windows media player activex component in my Form. On top of this WM player i have a picturebox with background color set to transparent. When i set an image for this picturebox , thought the image contains transparent areas it is displayed as black when the picturebox is above the WM player component. Where as if i place the PictureBox somewhere else in the form. The transparent area are rendered properly. So is there anyway that i can place a transparent image on top of a WM Player component. (hmm something like watermark may be). I want this picture to be displayed with may be 50% opacity when the video is playing in WM player control. Will GDI+ be of any use in this case?

    Read the article

  • Issue booting Linux Mint from Live CD?

    - by Vee
    I had Windows 8 and Linux Mint 15 dual booted on my laptop. When I first installed Linux, I wasn't able to load into because the grub would not show. To fix this, I used boot-repair from a Live CD. This time, I updated to Windows 8.1 and it showed a watermark telling me my secure boot wasn't configured properly. I then went and enabled secure boot (BIOS) and I believe it was after that that the Grub would not show once again. I tried to boot from a Linux CD again but when I try, it gives me the following errors: error: failure reading sector 0x0 from 'hd1' error: you need to load the kernel first. Press any key to continue... Before, it was giving me an error with sector 0x6d200 or something instead of 0x0. I am completely unsure of what to do. I do not know what other details to give except that this my have happened after I enabled secure boot, and I actually clicked reset to default setting so I am unsure if any other settings were changed in the BIOS menu.

    Read the article

  • Dealing with AVCHD. Any free software to extract or edit AVCHD video?

    - by Kelsey
    I have a Panasonic HDC-SD5 video carmera which records in HD format to a memory card. It also came with a DVD burner which burns this format to DVD which I need a blu-ray player to view. I can get about 30 min worth of video on 1 DVD. My problem is the software that comes with the camera is not very good at all so I am constantly just using the 'backup' feature in the included burner (connect drive to camera, push backup, and it spits out up to 4 DVDs worth of HD video). Now that I have the video backed up on DVD in the HD format (blu-ray), is there any free software that I can use to edit this video and create other HD DVD's with my own menus, transitions, etc? I was considering buying Pinnacle Studio but I wanted to exaust any free options before biting the bullet. Any suggestions for software I could use or anything else I could do to make dealing with this AVCHD format any easier that I am unaware of? Edit: Sorry forgot to include that I am running Windows Vista 64-bit. Edit: Still haven't found anything that is truely free. Everything has limitations by either time, watermark the video or degrade the quality. Edit: So I still haven't found really anything, so is there some software I can use to convert the video to another format that I then could use to edit the video?

    Read the article

  • Safemode Startup Issues on Vista 64 Bit

    - by GnrlBzik
    Before i ask the question, let me point out that this is not a hardware issue. I have a clean install of vista on another hd that runs on same hardware, i am pretty sure its a corruption of a drive or a file, i presume it might be video driver. When windows wont start via normal boot i just get black screen after initial load up of os, so i boot into savemode, I end up having black screen with a mouse pointer visible, after initial load of os. The shut down button is responsive. Of course, I can install clean copy of os, and prior to that can retrieve all other files that i need by accessing hd itself, i can restore my pc from my external back up as well. Although i have all these options, i was wondering if there anything else i can do that can help me fix this issue. In save mode, it looks like I am capable of logging in after initial load of os, even though i cant see the process it self, i do see the mouse pointer. By visual memory i navigated to password field, and entered my password, hit enter, I get the loading mouse pointer, nothing really changes, same black screen and mouse pointer, but when i tried to access task manager for a second i got a safemode watermark at all four corners. Any help would be appriciated. Thank you in advance.

    Read the article

  • Exchange 2003 -- Mailbox Management not deleting ALL messages aged 30 days or older...

    - by tcv
    I've recently created a Mailbox Management task within Exchange 2003 that, every night, looks at the contents of the Deleted Items within a particular mailbox and deletes mail that's 30 days or older. The scheduled task ran on its own last night and I have confirmed that messages within the right mailbox and the right folder were, in fact, processed. Many mails were deleted ... but not never email older than 30 days. In fact, the choice seems kinda random. Last night 3/10/2010 was the 30 day watermark. Mails were deleted from 3/10/2010, sure enough, but not all of them. Mails older than 3/10/2010 were deleted as well, but, again, not all of them. The only criteria I have on the management -- aside from the single mailbox and single folder scopes -- is the age criteria. The size criteria is set to Any, meaning I don't care about the size. I care about the age. It's made me wonder where there is some sort of limit on how many mails can be processed? The schedule is set for 12am and 1am every night. Any hints appreciated.

    Read the article

  • Localization with ASP.NET MVC ModelMetadata

    - by kazimanzurrashid
    When using the DisplayFor/EditorFor there has been built-in support in ASP.NET MVC to show localized validation messages, but no support to show the associate label in localized text, unless you are using the .NET 4.0 with Mvc Future. Lets a say you are creating a create form for Product where you have support both English and German like the following. English German I have recently added few helpers for localization in the MvcExtensions, lets see how we can use it to localize the form. As mentioned in the past that I am not a big fan when it comes to decorate class with attributes which is the recommended way in ASP.NET MVC. Instead, we will use the fluent configuration (Similar to FluentNHibernate or EF CodeFirst) of MvcExtensions to configure our View Models. For example for the above we will using: public class ProductEditModelConfiguration : ModelMetadataConfiguration<ProductEditModel> { public ProductEditModelConfiguration() { Configure(model => model.Id).Hide(); Configure(model => model.Name).DisplayName(() => LocalizedTexts.Name) .Required(() => LocalizedTexts.NameCannotBeBlank) .MaximumLength(64, () => LocalizedTexts.NameCannotBeMoreThanSixtyFourCharacters); Configure(model => model.Category).DisplayName(() => LocalizedTexts.Category) .Required(() => LocalizedTexts.CategoryMustBeSelected) .AsDropDownList("categories", () => LocalizedTexts.SelectCategory); Configure(model => model.Supplier).DisplayName(() => LocalizedTexts.Supplier) .Required(() => LocalizedTexts.SupplierMustBeSelected) .AsListBox("suppliers"); Configure(model => model.Price).DisplayName(() => LocalizedTexts.Price) .FormatAsCurrency() .Required(() => LocalizedTexts.PriceCannotBeBlank) .Range(10.00m, 1000.00m, () => LocalizedTexts.PriceMustBeBetweenTenToThousand); } } As you can we are using Func<string> to set the localized text, this is just an overload with the regular string method. There are few more methods in the ModelMetadata which accepts this Func<string> where localization can applied like Description, Watermark, ShortDisplayName etc. The LocalizedTexts is just a regular resource, we have both English and German:   Now lets see the view markup: <%@ Page Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<Demo.Web.ProductEditModel>" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> <%= LocalizedTexts.Create %> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2><%= LocalizedTexts.Create %></h2> <%= Html.ValidationSummary(false, LocalizedTexts.CreateValidationSummary)%> <% Html.EnableClientValidation(); %> <% using (Html.BeginForm()) {%> <fieldset> <%= Html.EditorForModel() %> <p> <input type="submit" value="<%= LocalizedTexts.Create %>" /> </p> </fieldset> <% } %> <div> <%= Html.ActionLink(LocalizedTexts.BackToList, "Index")%> </div> </asp:Content> As we can see that we are using the same LocalizedTexts for the other parts of the view which is not included in the ModelMetadata like the Page title, button text etc. We are also using EditorForModel instead of EditorFor for individual field and both are supported. One of the added benefit of the fluent syntax based configuration is that we will get full compile type checking for our resource as we are not depending upon the string based resource name like the ASP.NET MVC. You will find the complete localized CRUD example in the MvcExtensions sample folder. That’s it for today.

    Read the article

  • Silverlight Cream for May 08, 2010 -- #858

    - by Dave Campbell
    In this Issue: Phil Middlemiss, Jaime Rodriguez, Senthil Kumar, Mike Snow, DaveDev, Gergely Orosz, Kirupa, Cheryl Simmons, András Velvárt, Dan Wahlin, Michael D. Brown, and Ben Rush. Shoutouts: Erik Mork and crew have their latest up: This Week In Silverlight – Where’s the Tablet? Chris Rouw has a good link post and instructions on WCF RIA services: Deploying and Configuring Silverlight 4 and WCF RIA Services From SilverlightCream.com: Quick and Easy Sscalable Rounded Bevels Phil Middlemiss duplicates some bevel-edged rectangles in Blend, and they look great. Now you don't have to import all the other PhotoShop bits to get those things looking the way you want! A transparent Windows PHONE FAQ Jaime Rodriguez combined a bunch of information into a WP7 FAQ that he's going to keep up to date, so bookmark the page. He also has links to the Training Kit, on and offline versions. Windows Phone Developer Training Kit April Refresh is now available for Download Thanks to Senthil Kumar, I found out there is an April refresh of the WP7 Training kit at Channel 9 -- go get yours now --- I'll still be here when you get back! Silverlight Tip of the Day #16 – Working with IgnoreImageCache Mike Snow's Tip of the day #16 covers IgnoreImageCache and like many other things in life, until you read Mike's post you may be surprised at how it works. DoodlePad – A fun, free, sketching application for Windows Phone 7 DaveDev has a new WP7 App up that lets you or your kids 'Doodle' on the phone... could be a note, or could be a drawing... good post with all the links you need to get this cranked up on the emulator. Printing in Silverlight: Printing Charts and Auto Scaling Gergely Orosz's latest post is a very useful one on auto-scaling charts to fit a printed page and then getting them to print. Smoothly Scrolling a ListBox Check out the smooth scrolling Kirupa has on the ListBox near the top of his post... all good stuff... you wanna know how to do that! Plus... it's dead simple and all in Blend :) http://www.sparklingclient.com/wheres-the-silverlight-tablet/ Cheryl Simmons has a great tip up at the SilverlightSDK if you haven't burned through to figure it out yet ... changing the watermark on a DatePicker control... looks great! The story of a wicked bug András Velvárt tells a story of a bug that just defied logic or being found. Read how he tracked it down and what it actually was... could save you some time. Story learned: if I have a problem that bad, I'm calling András :) Text Trimming in Silverlight 4 Dan Wahlin gives a quick run-through of what TextBox trimming is, and then by a good real example... check it out and start using it in your projects. Enterprise Patterns with WCF RIA Services Michael D. Brown has an article in MSDN Magazine on RIA Services. Great information and link-packed article, with all the source avialable for download. Building Custom Players with the Silverlight Media Framework Ben Rush has a nice long tutorial on the Silverlight Media Framework up on the MSDN Magazine site ... lots of information in there. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Getting the size of the window WITHOUT title/notification bars

    - by Anidamo
    Hi there, I've been playing around with Android development and one of the things I'd like to be able to do is dynamically create a background image for my windows, similar to the one below. This is from my BlackBerry app. It consists of three separate parts, the bottom right logo, the top left watermark, and the bottom right name. It works independent of screen size because the BlackBerry app just gets all three parts and generates an appropriately sized bitmap using the screen width and height. Since Android has quite a bit more screen resolution possibilities I need to be able to generate backgrounds on the fly like this. However, I have not found any way to get the height/width of the window in Android. I can get the screen resolution, but that includes the application title bar and the notification bar, which is unacceptable. I'd like to know how to get the size of my window, or screen resolution minus the title and notification bars. I think this might be possible using the dimensions of my layout managers but I cannot get the height/width of them in the onCreate method so I'm at a little bit of a loss. Thanks.

    Read the article

  • How to disable scaling in JFreeChart?

    - by Alex Arnon
    Hi All, We're using JFreeChart to build an engine to display graphs. This is a web service that runs on Tomcat + Java 1.5.0, and renders charts to PNGs and JPEGs (using ChartUtilities.writeChartAs{PNG,JPEG}() ). We've run into a problem where JFreeChart seems to scale everything inside the Plot area, but only by a few pixels. The result is that the graph looks inconsistent, e.g.: Minor ticks are sometimes stretched horizontally, so that they seem to be two pixels wide instead of one. We use a small image in the top-right of the plot area as a watermark. This is stretched by one pixel horizontally and vertically somewhere near (but not exactly) its middle. Background grid lines seem to appear on sub-pixel boundaries. I have not found a way to create an accurately dotted grid line. We have tried both 1.0.9 and 1.0.13, with exactly the same results (except for the minor ticks, which were not available in the older version). Also, rendering the image to a Frame instead of JPEG/PNG produced an identical result. Help is greatly appreciated, in advance :)

    Read the article

  • Jquery find behavior in firefox 3.5.9

    - by dragoon
    Hi, i have the following piece of HTML code on my page: <tr> <td> <div> <input type="hidden" name="test" value=""> <input autocomplete="off" class="ffb-input watermark"> <div class="ffb"> <div class="content"> </div> </div> </div> </td> </tr> In JavaScript I get the <tr> element using jquery and trying to search for input like this: tr.find('div input:hidden') but nothing is returned. When I'm using find like this: tr.find('div input[type=hidden]') Everything is working fine. What is the reason for such behavor? I observe this only in FireFox 3.5.9, not in 3.6.3, Jquery 1.4.2

    Read the article

  • Sticky Footer Dilemma - so close

    - by fmz
    I have an effective sticky footer solution, but I have a slight conflict because of the need for a background image in addition to the repeating banner image across the top. In order to make the large watermark type image show up on this site I added the following div: <div id="body-outer"> The only problem is that once I add this div tag, the footer climbs up the page, overriding all content in its path. If I remove that div, the footer is as sticky as one could hope. Is there some way to have the background image and the sticky footer too? Here is the basic html structure: <body class="home"> <div id="body-outer"> <div id="container"> <div id="header"> ... <div id="footer"> <p>Placeholder for footer content</p> </div> Here is the css for the sticky footer and the background image: #body-outer { background: url(../_images/bg_body.jpg) no-repeat center top; height: 100%; } body { width: 100%; background: url(../_images/bg_html.jpg) repeat-x left top; } #container { width: 960px; margin: 0 auto; } html, body, #container { height: 100%; } body > #container { height: auto; min-height: 100%; padding-bottom: 140px; } #main { padding-bottom: 0; } #footer { position: relative; width: 100%; background-color: #4e8997; margin-top: ; /* negative value of footer height */ height: 140px; clear:both; } .clearfix:after { content: "."; display: block; height: 0; clear: both; visibility: hidden; } .clearfix {display: inline-block;} * html .clearfix { height: 1%;} Any assistance in sorting this out would be greatly appreciated. thanks.

    Read the article

  • Kernel panic when bringing up DRBD resource

    - by sc.
    I'm trying to set up two machines synchonizing with DRBD. The storage is setup as follows: PV - LVM - DRBD - CLVM - GFS2. DRBD is set up in dual primary mode. The first server is set up and running fine in primary mode. The drives on the first server have data on them. I've set up the second server and I'm trying to bring up the DRBD resources. I created all the base LVM's to match the first server. After initializing the resources with `` drbdadm create-md storage I'm bringing up the resources by issuing drbdadm up storage After issuing that command, I get a kernel panic and the server reboots in 30 seconds. Here's a screen capture. My configuration is as follows: OS: CentOS 6 uname -a Linux host.structuralcomponents.net 2.6.32-279.5.2.el6.x86_64 #1 SMP Fri Aug 24 01:07:11 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux rpm -qa | grep drbd kmod-drbd84-8.4.1-2.el6.elrepo.x86_64 drbd84-utils-8.4.1-2.el6.elrepo.x86_64 cat /etc/drbd.d/global_common.conf global { usage-count yes; # minor-count dialog-refresh disable-ip-verification } common { handlers { pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b /proc/sysrq-trigger ; reboot -f"; pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b /proc/sysrq-trigger ; reboot -f"; local-io-error "/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh; echo o /proc/sysrq-trigger ; halt -f"; # fence-peer "/usr/lib/drbd/crm-fence-peer.sh"; # split-brain "/usr/lib/drbd/notify-split-brain.sh root"; # out-of-sync "/usr/lib/drbd/notify-out-of-sync.sh root"; # before-resync-target "/usr/lib/drbd/snapshot-resync-target-lvm.sh -p 15 -- -c 16k"; # after-resync-target /usr/lib/drbd/unsnapshot-resync-target-lvm.sh; } startup { # wfc-timeout degr-wfc-timeout outdated-wfc-timeout wait-after-sb become-primary-on both; wfc-timeout 30; degr-wfc-timeout 10; outdated-wfc-timeout 10; } options { # cpu-mask on-no-data-accessible } disk { # size max-bio-bvecs on-io-error fencing disk-barrier disk-flushes # disk-drain md-flushes resync-rate resync-after al-extents # c-plan-ahead c-delay-target c-fill-target c-max-rate # c-min-rate disk-timeout } net { # protocol timeout max-epoch-size max-buffers unplug-watermark # connect-int ping-int sndbuf-size rcvbuf-size ko-count # allow-two-primaries cram-hmac-alg shared-secret after-sb-0pri # after-sb-1pri after-sb-2pri always-asbp rr-conflict # ping-timeout data-integrity-alg tcp-cork on-congestion # congestion-fill congestion-extents csums-alg verify-alg # use-rle protocol C; allow-two-primaries yes; after-sb-0pri discard-zero-changes; after-sb-1pri discard-secondary; after-sb-2pri disconnect; } } cat /etc/drbd.d/storage.res resource storage { device /dev/drbd0; meta-disk internal; on host.structuralcomponents.net { address 10.10.1.120:7788; disk /dev/vg_storage/lv_storage; } on host2.structuralcomponents.net { address 10.10.1.121:7788; disk /dev/vg_storage/lv_storage; } /var/log/messages is not logging anything about the crash. I've been trying to find a cause of this but I've come up with nothing. Can anyone help me out? Thanks.

    Read the article

  • Adventures in Windows 8: Working around the navigation animation issues in LayoutAwarePage

    - by Laurent Bugnion
    LayoutAwarePage is a pretty cool add-on to Windows 8 apps, which facilitates greatly the implementation of orientation-aware (portrait, landscape) as well as state-aware (snapped, filled, fullscreen) apps. It has however a few issues that are obvious when you use transformed elements on your page. Adding a LayoutAwarePage to your application If you start with a blank app, the MainPage is a vanilla Page, with no such feature. In order to have a LayoutAwarePage into your app, you need to add this class (and a few helpers) with the following operation: Right click on the Solution and select Add, New Item from the context menu. From the dialog, select a Basic Page (not a Blank Page, which is another vanilla page). If you prefer, you can also use Split Page, Items Page, Item Detail Page, Grouped Items Page or Group Detail Page which are all LayoutAwarePages. Personally I like to start with a Basic Page, which gives me more creative freedom. Adding this new page will cause Visual Studio to show a prompt asking you for permission to add additional helper files to the Common folder. One of these helpers in the LayoutAwarePage class, which is where the magic happens. LayoutAwarePage offers some help for the detection of orientation and state (which makes it a pleasure to design for all these scenarios in Blend, by the way) as well as storage for the navigation state (more about that in a future article). Issue with LayoutAwarePage When you use UI elements such as a background picture, a watermark label, logos, etc, it is quite common to do a few things with those: Making them partially transparent (this is especially true for background pictures; for instance I really like a black Page background with a half transparent picture placed on top of it). Transforming them, for instance rotating them a bit, scaling them, etc. Here is an example with a picture of my two beautiful daughters in the Bird Park in Kuala Lumpur, as well as a transformed TextBlock. The image has an opacity of 40% and the TextBlock a simple RotateTransform. If I create an application with a MainPage that navigates to this LayoutAwarePage, however, I will have a very annoying effect: The background picture appears with an Opacity of 100%. The TextBlock is not rotated. This lasts only for less than a second (during the navigation animation) before the elements “snap into place” and get their desired effect. Here is the XAML that cause the annoying effect: <common:LayoutAwarePage x:Name="pageRoot" x:Class="App13.BasicPage1" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:common="using:App13.Common" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d"> <Grid Style="{StaticResource LayoutRootStyle}"> <Grid.RowDefinitions> <RowDefinition Height="140" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <Image Source="Assets/el20120812025.jpg" Stretch="UniformToFill" Opacity="0.4" Grid.RowSpan="2" /> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" /> <ColumnDefinition Width="*" /> </Grid.ColumnDefinitions> <Button x:Name="backButton" Click="GoBack" IsEnabled="{Binding Frame.CanGoBack, ElementName=pageRoot}" Style="{StaticResource BackButtonStyle}" /> <TextBlock x:Name="pageTitle" Grid.Column="1" Text="Welcome" Style="{StaticResource PageHeaderTextStyle}" /> </Grid> <TextBlock HorizontalAlignment="Center" TextWrapping="Wrap" Text="Welcome to my Windows 8 Application" Grid.Row="1" VerticalAlignment="Bottom" FontFamily="Segoe UI Light" FontSize="70" FontWeight="Light" TextAlignment="Center" Foreground="#FFFFA200" RenderTransformOrigin="0.5,0.5" UseLayoutRounding="False" d:LayoutRounding="Auto" Margin="0,0,0,153"> <TextBlock.RenderTransform> <CompositeTransform Rotation="-6.545" /> </TextBlock.RenderTransform> </TextBlock> <VisualStateManager.VisualStateGroups> [...] </VisualStateManager.VisualStateGroups> </Grid> </common:LayoutAwarePage> Solving the issue In order to solve this “snapping” issue, the solution is to wrap the elements that are transformed into an empty Grid. Honestly, to me it sounds like a bug in the LayoutAwarePage navigation animation, but thankfully the workaround is not that difficult: Simple change the main Grid as follows: <Grid Style="{StaticResource LayoutRootStyle}"> <Grid.RowDefinitions> <RowDefinition Height="140" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <Grid Grid.RowSpan="2"> <Image Source="Assets/el20120812025.jpg" Stretch="UniformToFill" Opacity="0.4" /> </Grid> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto" /> <ColumnDefinition Width="*" /> </Grid.ColumnDefinitions> <Button x:Name="backButton" Click="GoBack" IsEnabled="{Binding Frame.CanGoBack, ElementName=pageRoot}" Style="{StaticResource BackButtonStyle}" /> <TextBlock x:Name="pageTitle" Grid.Column="1" Text="Welcome" Style="{StaticResource PageHeaderTextStyle}" /> </Grid> <Grid Grid.Row="1"> <TextBlock HorizontalAlignment="Center" TextWrapping="Wrap" Text="Welcome to my Windows 8 Application" VerticalAlignment="Bottom" FontFamily="Segoe UI Light" FontSize="70" FontWeight="Light" TextAlignment="Center" Foreground="#FFFFA200" RenderTransformOrigin="0.5,0.5" UseLayoutRounding="False" d:LayoutRounding="Auto" Margin="0,0,0,153"> <TextBlock.RenderTransform> <CompositeTransform Rotation="-6.545" /> </TextBlock.RenderTransform> </TextBlock> </Grid> <VisualStateManager.VisualStateGroups> [...] </Grid> Hopefully this will help a few people, I banged my head on the wall for a while before someone at Microsoft pointed me to the solution ;) Happy coding, Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >