Search Results

Search found 26977 results on 1080 pages for 'input device'.

Page 501/1080 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >

• How to access the SD card through my Sony Ericsson Xperia Arc Phone?

  - by user16364

  I have a Sony Ericsson Xperia Arc phone and I cannot access its SD card through the USB cable provided. I have set the USB connection mode to MSC yet when I connect the phone to my computer I cannot see the SD card (or anything for that matter). The Disk Utility however, does see an SEMC Mass Storage device but it says that no media was detected. I have validated that the SD card works as I removed it from the camera and plugged it into a card reader and saw all the photos and files stored on it. I have validated that the phone works as I have connected it (in MSC mode) to my wife's Windows 7 computer. Can anyone please tell me how I can access the SD card on my phone.

  Read the article

• Syncing between computers / batch download

  - by Eric

  I have synced files from two different devices. Now I want to copy to contents of the synced files to the other device. Using the web interface, it seems only possible to download one file at a time. Is there a way to setup automatic sync or to download all the files in a folder with one step? Thanks in advance for your time. I was using the web interface to ubuntu, but an answer for Ubuntu One would also be ok.

  Read the article

• How to get wireless and wired network working again on my Dell Inspiron 1501?

  - by Angelo Daul

  My wireless doesn't work with Ubuntu 12.04.(it worked with 10.04 LTS) I have a Dell Inspiron 1501. I followed the steps posted below:(from a similar tag, but...) sudo apt-get install --reinstall bcmwl-kernel-source broadcom-sta-common broadcom-sta-source echo "blacklist brcmsmac" | sudo tee -a /etc/modprobe.d/blacklist.conf echo "blacklist bcma" | sudo tee -a /etc/modprobe.d/blacklist.conf ....and now i have no Network device on my PC(wired or wireless) I can use wired conection if i start my laptop with a"previsious version of Linux"...2.26.43... I am a beginner in Linux These are my hardware: 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [ 14e4:4311] (rev 01) 08:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [ 14e4:170c] (rev 02)

  Read the article

• My laptop does not have sound and the video reproduces it very rapidly. ubuntu 12.04

  - by user48221

  Once my laptop was fallen and the wi-fi broke, lead her to repairing and when they returned me already it had wi-fi again, but I realized that it did not have sound. In sound configuration it could not raise him, to know if it was a problem of the horns I connected a few headphones and neither it was listened. Because of it I knew that it was a problem of the software, and another problem that I saw, it was that the video player was going too rapidly as if it was advancing him. Where it leads her to arranging they say that they did not touch anything of software, alone they repaired the device of the wi-fi. How I can fix it?

  Read the article

• How to copy or sync music on iphone 3gs on ubuntu 14.04?

  - by user276842

  I’m using Ubuntu 14.04 and want to copy music to/on my iPhone 3gs. I already installed the actual mobile device, but neither Rhythmbox nor gmusicbrowser show my phone. Only on Gigolo I can see it, and transfer data, but the music I copy is not working on my phone. On Amarok I get at least this information: termined mount-point path to /tmp/kde-cafer/amarok/imobiledevice_uuid_882ba1378fe4eb76e98ad6582dcad031c2247664 calling `ifuse "-u" "882ba1378fe4eb76e98ad6582dcad031c2247664" "-ofsname=afc://882ba1378fe4eb76e98ad6582dcad031c2247664" "/tmp/kde-cafer/amarok/imobiledevice_uuid_882ba1378fe4eb76e98ad6582dcad031c2247664"` with timeout of 10s command failed to start within timeout Failed to mount iPhone on /tmp/kde-cafer/amarok/imobiledevice_uuid_882ba1378fe4eb76e98ad6582dcad031c2247664 Does anyone have an idea? Thanks

  Read the article

• No sound coming from HDMI

  - by cypwrx

  (Ubuntu 12.04 x64) After looking at other questions (here and other sites) and trying their respective answers, I am still unable to get the hdmi audio out working. I have downloaded the recommended hardware drivers for my card (radeon hd 4350), made sure that the card is not muted in alsamixer, and set it as the correct output device in sound settings. I have also disabled the onboard sound devices in the bios menu. In aplay -l, it shows my hdmi card as hw:0,3 Even after doing sound tests I still cannot hear anything. Any suggestions? Not sure where to go from here, I am fairly new to linux.

  Read the article

• Ubuntu installation time problem

  - by hellodear

  I am installing Ubuntu and I am stuck at a point. The step is when it is asking me to select partition. It is showing me error: "No file system is defined Please correct this from partitioning menu". I am getting this error when I am clicking "Install". I want Ubuntu to install in /dev/sda7 which is 226727 Mb. I have Windows 8 in my system and I want to dual boot the system. So how to correct this error? I want to allocate this whole partition to Ubuntu only. Secondly, What should I put in the option: "Device for boot loader installation"? By default it is somewhat like this: "ATA WDC WD5000..." something like this. Please tell my both these questions. I would be very thankful to you. Thanks.

  Read the article

• Dual display setup - only one displayed after logon

  - by oneofthemany

  During boot process my desktop shows both Monitors, but after log I only get one. I'm using Ubuntu 11.10 When I go into Displays its still only shows on Monitor. Here is my graphics card details: 01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device 0405 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at dd000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at de000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at dfe00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia_96, nvidia_173, nouveau, nvidiafb

  Read the article

• How do I fix the audio on my laptop. model Fujitsu B6220

  - by user89756

  I reinstalled Ubuntu 12.04 on my laptop because the Unity desktop was freezing. Reinstalling 12.04 seems to have fixed the freezing problem, but now the audio does not work. When I go to SettingsAudio and under the Output tab it only has the option for Digital Output. There is no option for Analog Output. The sound card show up under lspci as: "00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)" What would be the command to reinstall the audio subsystem? If that would fix it...

  Read the article

• Ubuntu 12.04 won't boot from USB

  - by user986871

  I downloaded Ubuntu 12.04, then using the tool Startup Disk Creator i made the live usb. I checked that it's bootable Device Boot Start End Blocks Id System /dev/sdb1 * 62 15635593 7817766 c W95 FAT32 (LBA) Now on my lap top it boots nicely, but on two other machines that don't have any installation of ubuntu(no Grub) it doesn't boot. I changed the booting order so that USB is before HDD. So i think i did everything i know, but no luck. How can i use this USB drive on other devices that don't have any previous ubuntu installation.

  Read the article

• Dual Boot not recognizing new hard drive

  - by Grove

  I am a complete Linux newb..which will become obvious shortly. The story: I wanted to dual boot with Ubuntu. I already had windows on 1 hard drive (320gb), and I wanted Ubuntu on a 2nd hard drive (2tb). I setup the partitions using the "Something else" option - I left the first hard drive alone, and put a swap and a ext4 partition on the 2nd hard drive. When it asked me where the bootable device was, I put the first hard drive. The problem: Now that Ubuntu is installed and grub lets me pick which os to boot to, I boot to ubuntu JUST FINE. BUT when I go to the home folder and look at devices, the only drive showing is the 320 gb/old hard drive that windows was installed on. I can not see the 2 TB hard drive anywhere. This is strange because I setup the Ubuntu partition to be the 2 TB hard drive and I thought I installed ubunto on that partition. Thank you for your time and patience :)

  Read the article

• Can't Reboot into Windows 8.1 from Ubuntu

  - by Extended Range

  I am newb in Ubuntu. Currently I am using an Acer V11 laptop with a pre-intalled Windows 8.1. I follow some guideline (http://www.everydaylinuxuser.com/2014/05/install-ubuntu-1404-alongside-windows.html) which successfully install Ubuntu 14.04 LTS alongside Windows 8.1 with UEFI enabled all the way throughout the installation and my current usage and a GRUB. But I got into some problem. The dual boot mostly works fine as I am able to successfully boot into either one of the Windows 8.1 or Ubuntu when stating my laptop. However it ran into issue after I start the device and use Ubuntu for a while (2 hour for instance) and then restart it: If I press the restart from Ubuntu, the grub still shows and I am still able to choose the Windows Boot Manager. But the Windows loading process was stuck at the Acer Loading Screen and I am not able to see the standard circular Win8 loading progress bar. Does someone know why would this happens?

  Read the article

• Boot screen appears to be asking a question but garbled

  - by mark kaylor

  I'm running 12.04 Precise Pangolin, Kernel 3.2.0-32 w/ GNOME 3.4.2 I perused the prior questions/answers and did not find exactly the same problem, I am concerned that AUTOFSCK, Grub or some other critical event that needs some attention ? Any idea on how to get my video clean during boot? Once I get past the boot screen the video driver/card, etc is performing beautifully ! Here is a photo of the boot screen; nVidia GeForce CARD INFORMATION (lspci -vvv) 01:00.0 VGA compatible controller: NVIDIA Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gateway 2000 Device 3a07 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: Kernel driver in use: nvidia Kernel modules: nvidia_173, nouveau, nvidiafb Thanks for your help/advice.

  Read the article

• Getting wireless N to work on Dell Vostro 3300?

  - by luisfpg

  I have a Dell Vostro 3300, which has a Broadcom BCM4313 wireless. The point is that I cannot make it work in N mode. NetwotkManager applet says I'm on 54 Mbit/s. Of course, my wireless router is N capable. I've double checked. Anyone knows what to do? Here is the output for lspci -v: 12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Dell Device 0010 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fbb00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: wl Kernel modules: wl, brcm80211 Thanks a lot.

  Read the article

• I have installed Ubuntu 12.04, now my Windows Vista doesn't boot

  - by andraz

  I have a Windows Vista computer. And I've installed Ubuntu 12.04 on it. But now, when I boot my device it doesn't ask me which OS I want to choose, instead it just boots in Ubuntu. Please help me! I don't know what to do... :/ P.S.: I've created a partition with the Ubuntu installer. My hard disk drive is 250 gb (there around) and the partition is 30gb big... P.S.S.: It's very important because is my mom's computer and there are some very important files on it... :(

  Read the article

• Touchpad & TrackPoint (ThinkPad L520) suddenly unresponsive

  - by yesyoar

  My mother has a problem with her ThinkPad L520 notebook (Ubuntu 11.10, Unity). She boots the device, everything works fine at first. But then, out of nowhere, her touchpad + trackpoint stop working. She can't click or drag the mouse. If she connects an external mouse, she can move the pointer and click (but the internal touchpad or trackpoint still don't work). She already updated everything through the update manager, but still no success...like I said, sometimes it works, sometimes it doesn't. There are no 'special' mouse drivers installed. What can I do to fix this? Thank you for your help! :)

  Read the article

• Clean install of 12.04 won't boot from HDD

  - by MarchingKazoo

  Downloaded 12.04.2. Made CD. Machine boots from CD as expected. Installed onto HD. Upon reboot, "Read error" message appears. Upon booting from CD, the HD appears as expected: One partition for Ubuntu, taking up about 12 gig, the rest empty. Lather, rinse, repeat five times. Results of "sudo fdisk -l": Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000dfa3e Device Boot Start End Blocks Id System /dev/sda1 * 2048 386596863 193297408 83 Linux /dev/sda2 386598910 390721535 2061313 5 Extended /dev/sda5 386598912 390721535 2061312 82 Linux swap / Solaris Should this be complicate? Seems no.

  Read the article

• design for interruptable operations

  - by tpaksu

  I couldn't find a better topic but here it is; 1) When user clicks a button, code starts t work, 2) When another button is clicked, it would stop doing whatever it does and start to run the second button's code, 3) Or with not user interaction, an electrical power down detected from a connected device, so our software would cancel the current event and start doing the power down procedure. How is this design mostly applied to code? I mean "stop what you are doing" part? If you would say events, event handlers etc. how do you bind a condition to the event? and how do you tell the program without using laddered if's to end it's process? method1(); if (powerdown) return; method2(); if (powerdown) return; etc.

  Read the article

• Problem with Nvidia after update

  - by user214673

  After adding the most recent set of updates, I can't get into Ubuntu at all. I get a screen saying that I am running in low-graphics mode, 'your screen, graphics card and input device settings could not be detected correctly etc'. I can hit return and then get to the next screen saying 'what would you like to do?' however, i can't choose from the 4 options, the only keystroke that will register is escape, which takes me to a black screen with a login. I have an Nvidia GeForce 7050/nForce 610i and it has caused problems in the past, but I have always got round it by choosing to boot in recovery mode. Now, no matter which version I try to boot into I can't get into Ubuntu at all.

  Read the article

• Can my computer run Ubuntu? [duplicate]

  - by Harry B

  This question already has an answer here: How do I find out which version and derivative of Ubuntu is right for my hardware in terms of minimal system requirements? 2 answers Just want to check if my computer can run Ubuntu. It is an old IBM ThinkPad, so here are the basic stats I could find: IBM 28832ZU Processor Intel(R) Celeron(R) M processor 1300MHz Processor Speed 1.27 GHz Memory (RAM) 2048 MB Operating System Microsoft Windows XP Professional Operating System Version 5.1.2600 Intel Extreme Graphics 2M And here is some info pulled from the graphics panel NTEL(R) EXTREME GRAPHICS 2 FOR MOBILE REPORT Report Date: 06/28/2013 Report Time[hr:mm:ss]: 17:53:20 Driver Version: 6.14.10.3943 Operating System: Windows NT* 5.1.2600 Service Pack 2 Default Language: English DirectX* Version: 9.0 Physical Memory: 2038 MB Min. Graphics Memory: 8 MB Max. Graphics Memory: 64 MB Graphics Memory in use: 7 MB Processor: x86 family 6 Model 9 Stepping 5 Processor Speed: 1296 MHZ Device Revision: 2 Output Devices Connected to Graphics Accelerator * Active Notebook Displays:1

  Read the article

• How to access the SD card through my Sony Ericsson Xperia Arc Phone?

  - by user16364

  I have a Sony Ericsson Xperia Arc phone and I cannot access its SD card through the USB cable provided. I have set the USB connection mode to MSC yet when I connect the phone to my computer I cannot see the SD card (or anything for that matter). The Disk Utility however, does see an SEMC Mass Storage device but it says that no media was detected. I have validated that the SD card works as I removed it from the camera and plugged it into a card reader and saw all the photos and files stored on it. I have validated that the phone works as I have connected it (in MSC mode) to my wife's Windows 7 computer. Can anyone please tell me how I can access the SD card on my phone.

  Read the article

• Android / IPhone / Desktop C++ Game Template

  - by OriginalDaemon

  I was wondering if anyone has come across any articles detailing how to set up a basic game in C++ for use in Android / IPhone / Desktop applications. My thoughts just now are that I would like to make my game as a library and have a different project for each device which just interfaces with this library. You know the kind of thing, bootstrap the program, call some library initialize, load and run routines and occasionally pass some information to the library like input. I was hoping someone would have made a template for this kind of thing but I just had no luck finding one. It seems to me that it's the kind of thing you really only have to do once, so I was hoping someone would have done it for me already.

  Read the article

• My computter wont shutdown

  - by marijn

  If I try to shutdown my computer it simply takes me back to the login-screen. I looked around and found : Type in terminal: 1. sudo gedit /etc/default/grub 2. Find the line: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" 3. Change this to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force" 4. Save the file and close the file. 5. Finally, in terminal: sudo update-grub but now there is a new problem. if I try step 5 it says: myname@ubuntu:~$ sudo update-grub [sudo] password for myname: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?). myname@ubuntu:~$ I am new whit linux and dont know what to do.

  Read the article

• Getting wifi working on 14.04

  - by user286114

  I have installed Ubuntu 14.04 on my laptop. When I plug in the ethernet cable the internet works fine, but I can't see any wireless network in the networking manager. The wifi switch is definitely on on my laptop! It's a Dell XPS M1330. I'm not sure what the network card is - how can I find out? nm-tool gives me this: NetworkManager Tool State: connected (global) - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: tg3 State: connected Default: yes HW Address: 00:23:AE:28:FE:A2 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.26 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.254 DNS: 192.168.1.254

  Read the article

• Is it to late for Windows Phone 7 after the iPhone 4.0 comes out?

  This year has been an incredible year for mobile devices, from the release of the iPad to the reveal of the Windows Phone 7 from Microsoft to compete with the well establish Apple iPhone. Microsoft has been hard at work developing the OS for the Windows Phone 7 that will be release late this year, yet Apple will be releasing this summer the new iPhone 4.0 with new hardware to go with it. If we remember well, the first version of the iPhone was a good device, yet was missing many features...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >